![[tokkee]](http://tokkee.org/images/avatar.png){kind=avatar}
diff --git a/doc/rrdbuild.txt b/doc/rrdbuild.txt
index 0c00fb4d2dc69e569b886411c77c8e45c1bbd19c..702a54b37ccaa9cbe0ad85930b2405f01daf13e1 100644 (file)
--- a/doc/rrdbuild.txt
+++ b/doc/rrdbuild.txt
rrdbuild - Instructions for building RRDtool
O\bOV\bVE\bER\bRV\bVI\bIE\bEW\bW
- If you downloaded the source of rrdtool you have to compile it. This
+ If you downloaded the source of RRDtool you have to compile it. This
document will give some information on how this is done.
RRDtool relies on services of third part libraries. Some of these
This document will tell you about all the necessary steps to get going.
These instructions assume you are using a b\bba\bas\bsh\bh shell. If you use
- csh/tcsh, then you can either type _\bb_\ba_\bs_\bh to switch to bash for the com-
- pilation or if you know what you are doing just replace the export bits
- with setenv.
+ csh/tcsh, then you can either type _\bb_\ba_\bs_\bh to switch to bash for the
+ compilation or if you know what you are doing just replace the export
+ bits with setenv.
We further assume that your copies of t\bta\bar\br and m\bma\bak\bke\be are actually G\bGN\bNU\bU t\bta\bar\br
and G\bGN\bNU\bU m\bma\bak\bke\be respectively. It could be that they are installed as g\bgt\bta\bar\br
2. Where you want to install the software.
- Once you have decided. Save the two locations into environment vari-
- ables.
+ Once you have decided. Save the two locations into environment
+ variables.
BUILD_DIR=/tmp/rrdbuild
- INSTALL_DIR=/usr/local/rrdtool-1.3.1
+ INSTALL_DIR=/opt/rrdtool-1.4.8
If your _\b/_\bt_\bm_\bp is mounted with the option noexec (RHEL seems todo that)
you have to choose a different directory!
mkdir -p $BUILD_DIR
cd $BUILD_DIR
- Lets first assume you already have all the necessary libraries
- pre-installed.
+ Lets first assume you already have all the necessary libraries pre-
+ installed.
- wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.3.1.tar.gz
- gunzip -c rrdtool-1.3.1.tar.gz | tar xf -
- cd rrdtool-1.3.1
+ wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.4.8.tar.gz
+ gunzip -c rrdtool-1.4.8.tar.gz | tar xf -
+ cd rrdtool-1.4.8
./configure --prefix=$INSTALL_DIR && make && make install
Ok, this was very optimistic. This try will probably have ended with
c\bco\bon\bnf\bfi\big\bgu\bur\bre\be complaining about several missing libraries.
I\bIN\bNS\bST\bTA\bAL\bLL\bLI\bIN\bNG\bG D\bDE\bEP\bPE\bEN\bND\bDE\bEN\bNC\bCI\bIE\bES\bS
- If your OS lets you install additional packages from a software reposi-
- tory, you may get away with installing the missing packages. When the
- packages are installed, run configure again and try to compile again.
- Below you find some hints on getting your OS ready for the rrdtool com-
- pilation.
+ If your OS lets you install additional packages from a software
+ repository, you may get away with installing the missing packages. When
+ the packages are installed, run configure again and try to compile
+ again. Below you find some hints on getting your OS ready for compiling
+ RRDtool.
- Additions to this list are welcome.
-
- O\bOp\bpe\ben\bnS\bSo\bol\bla\bar\bri\bis\bs 2\b20\b00\b08\b8.\b.0\b05\b5
+ Additions to this list are welcome. In general RRDtool should work with
+ the latest versions of the libraries. The versions listed here are just
+ what was current when I tested this.
+ O\bOp\bpe\ben\bnS\bSo\bol\bla\bar\bri\bis\bs 2\b20\b00\b08\b8.\b.0\b05\b5
Just add a compiler and the gnome development package:
pkg install sunstudioexpress
pkg install SUNWgnome-common-devel
- There is a problem with _\bc_\ba_\bi_\br_\bo_\b._\bp_\bc on opensolaris. It suggests that xren-
- der is required for compilation with cairo. This is not true and also
- bad since opensolaris does not include an _\bx_\br_\be_\bn_\bd_\be_\br_\b._\bp_\bc file. Use perl to
- fix this:
+ There is a problem with _\bc_\ba_\bi_\br_\bo_\b._\bp_\bc on OpenSolaris. It suggests that
+ xrender is required for compilation with cairo. This is not true and
+ also bad since OpenSolaris does not include an _\bx_\br_\be_\bn_\bd_\be_\br_\b._\bp_\bc file. Use
+ Perl to fix this:
perl -i~ -p -e 's/(Requires.*?)\s*xrender.*/$1/' /usr/lib/pkgconfig/cairo.pc
- D\bDe\beb\bbi\bia\ban\bn /\b/ U\bUb\bbu\bun\bnt\btu\bu
+ Make sure the RRDtool build system finds your new compiler
+
+ export PATH=/opt/SunStudioExpress/bin
+ D\bDe\beb\bbi\bia\ban\bn /\b/ U\bUb\bbu\bun\bnt\btu\bu
Use apt-get to make sure you have all that is required. A number of
packages will get added through dependencies.
apt-get install libpango1.0-dev libxml2-dev
- G\bGe\ben\bnt\bto\boo\bo
-
- In Gentoo installing rrdtool is really simple you just need to e\bem\bme\ber\brg\bge\be
+ G\bGe\ben\bnt\bto\boo\bo
+ In Gentoo installing RRDtool is really simple you just need to e\bem\bme\ber\brg\bge\be
r\brr\brd\bdt\bto\boo\bol\bl. All dependencies will be handled automatically by the portage
system. The only thing you should care about are USE flags, which allow
- you fine tune features rrdtool will be built with. Currently the fol-
- lowing USE flags are available:
+ you fine tune features RRDtool will be built with. Currently the
+ following USE flags are available:
doc - install .html and .txt documentation
into /usr/share/doc/rrdtool-1.x.xx/
@@ -119,31 +122,21 @@ B\bBU\bUI\bIL\bLD\bDI\bIN\bNG\bG D\bDE\bEP\bPE\bEN\bND\bDE\bEN\bNC\bCI\bIE\bES\bS
don't live up to our expectations, so you may want to compile their
latest versions.
- G\bGe\ben\bne\ber\bra\bal\bl b\bbu\bui\bil\bld\bd t\bti\bip\bps\bs f\bfo\bor\br A\bAI\bIX\bX
-
- If you are working with AIX, you may find the the -\b--\b-d\bdi\bis\bsa\bab\bbl\ble\be-\b-s\bsh\bha\bar\bre\bed\bd
- option will cause things to break for you. In that case you may have to
- install the shared libraries into the rrdtool PREFIX and work with
+ G\bGe\ben\bne\ber\bra\bal\bl b\bbu\bui\bil\bld\bd t\bti\bip\bps\bs f\bfo\bor\br A\bAI\bIX\bX
+ If you are working with AIX, you may find the -\b--\b-d\bdi\bis\bsa\bab\bbl\ble\be-\b-s\bsh\bha\bar\bre\bed\bd option
+ will cause things to break for you. In that case you may have to
+ install the shared libraries into the RRDtool PREFIX and work with
-\b--\b-d\bdi\bis\bsa\bab\bbl\ble\be-\b-s\bst\bta\bat\bti\bic\bc instead.
- Another hint to get rrdtool working on AIX is to use the IBM XL C Com-
- piler:
+ Another hint to get RRDtool working on AIX is to use the IBM XL C
+ Compiler:
export CC=/usr/vac/bin/cc
export PERLCC=$CC
(Better instructions for AIX welcome!)
- B\bBu\bui\bil\bld\bd I\bIn\bns\bst\btr\bru\buc\bct\bti\bio\bon\bns\bs
-
- In order to build rrdtool need a compiler on your system. Unfortunately
- compilers are not all alike. This has an effect on the CFLAGS you want
- to set. The examples below are for the popular GCC compiler suite. If
- you have an other compilers here are some ides:
-
- Sun Forte
- CFLAGS="-xO3 -kPIC"
-
+ B\bBu\bui\bil\bld\bd I\bIn\bns\bst\btr\bru\buc\bct\bti\bio\bon\bns\bs
Some libraries want to know where other libraries are. For this to
work, set the following environment variable
@@ -154,12 +147,18 @@ B\bBU\bUI\bIL\bLD\bDI\bIN\bNG\bG D\bDE\bEP\bPE\bEN\bND\bDE\bEN\bNC\bCI\bIE\bES\bS
find instructions on how to compile pkgconfig.
Since we are compiling libraries dynamically, they must know where to
- find each other. This is done by setting an appropriate LDFLAGS. Unfor-
- tunately, the syntax again differs from system to system:
+ find each other. This is done by setting an appropriate LDFLAGS.
+ Unfortunately, the syntax again differs from system to system:
Solaris
export LDFLAGS=-R${INSTALL_DIR}/lib
+ if you are using the Sun Studio/Forte compiler, you may also want
+ to set
+
+ CFLAGS="-xO3 -xcode=pic13" (SPARC)
+ CFLAGS="-xO3 -Kpic" (x86)
+
Linux
export LDFLAGS="-Wl,--rpath -Wl,${INSTALL_DIR}/lib"
@@ -169,7 +168,7 @@ B\bBU\bUI\bIL\bLD\bDI\bIN\bNG\bG D\bDE\bEP\bPE\bEN\bND\bDE\bEN\bNC\bCI\bIE\bES\bS
AIX
export LDFLAGS="-Wl,-blibpath:${INSTALL_DIR}/lib"
- If you have GNUmake installed and it is not called 'make', then do
+ If you have GNU make installed and it is not called 'make', then do
export MAKE=gmake
export GNUMAKE=gmake
@@ -181,8 +180,8 @@ B\bBU\bUI\bIL\bLD\bDI\bIN\bNG\bG D\bDE\bEP\bPE\bEN\bND\bDE\bEN\bNC\bCI\bIE\bES\bS
_\bB_\bu_\bi_\bl_\bd_\bi_\bn_\bg _\bp_\bk_\bg_\bc_\bo_\bn_\bf_\bi_\bg
As mentioned above, without pkgconfig the whole build process will be
- lots of pain and suffering, so make sure you have a copy on your sys-
- tem. If it is not available natively, here is how to compile it.
+ lots of pain and suffering, so make sure you have a copy on your
+ system. If it is not available natively, here is how to compile it.
wget http://pkgconfig.freedesktop.org/releases/pkg-config-0.23.tar.gz
gunzip -c pkg-config-0.23.tar.gz | tar xf -
@@ -191,6 +190,11 @@ B\bBU\bUI\bIL\bLD\bDI\bIN\bNG\bG D\bDE\bEP\bPE\bEN\bND\bDE\bEN\bNC\bCI\bIE\bES\bS
$MAKE
$MAKE install
+ After installing pkgconfig in a custom directory, setting up the
+ corresponding environment variable will be helpful.
+
+ export PKG_CONFIG=$INSTALL_DIR/bin/pkg-config
+
_\bB_\bu_\bi_\bl_\bd_\bi_\bn_\bg _\bz_\bl_\bi_\bb
Chances are very high that you already have that on your system ...
@@ -236,9 +240,9 @@ B\bBU\bUI\bIL\bLD\bDI\bIN\bNG\bG D\bDE\bEP\bPE\bEN\bND\bDE\bEN\bNC\bCI\bIE\bES\bS
_\bB_\bu_\bi_\bl_\bd_\bi_\bn_\bg _\bL_\bi_\bb_\bX_\bM_\bL_\b2
cd $BUILD_DIR
- wget http://oss.oetiker.ch/rrdtool/pub/libs/libxml2-sources-2.6.31.tar.gz
- gunzip -c libxml2-sources-2.6.32.tar.gz | tar xf -
- cd libxml2-sources-2.6.32
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/libxml2-2.6.32.tar.gz
+ gunzip -c libxml2-2.6.32.tar.gz | tar xf -
+ cd libxml2-2.6.32
./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
$MAKE
$MAKE install
@@ -247,14 +251,14 @@ B\bBU\bUI\bIL\bLD\bDI\bIN\bNG\bG D\bDE\bEP\bPE\bEN\bND\bDE\bEN\bNC\bCI\bIE\bES\bS
Note that fontconfig has a run time configuration file in
INSTALL_DIR/etc you may want to adjust that so that fontconfig finds
- the fonts on your system. Run the fc-cache program to build the font-
- config cache after changing the config file.
+ the fonts on your system. Run the fc-cache program to build the
+ fontconfig cache after changing the config file.
cd $BUILD_DIR
wget http://oss.oetiker.ch/rrdtool/pub/libs/fontconfig-2.4.2.tar.gz
gunzip -c fontconfig-2.4.2.tar.gz | tar xf -
cd fontconfig-2.4.2
- ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC" --with-freetype-config=$INSTALL_DIR/bin/freetype-config
$MAKE
$MAKE install
@@ -272,8 +276,8 @@ B\bBU\bUI\bIL\bLD\bDI\bIN\bNG\bG D\bDE\bEP\bPE\bEN\bND\bDE\bEN\bNC\bCI\bIE\bES\bS
cd $BUILD_DIR
wget http://oss.oetiker.ch/rrdtool/pub/libs/cairo-1.6.4.tar.gz
- gunzip -c cairo-1.4.10.tar.gz | tar xf -
- cd cairo-1.4.10
+ gunzip -c cairo-1.6.4.tar.gz | tar xf -
+ cd cairo-1.6.4
./configure --prefix=$INSTALL_DIR \
--enable-xlib=no \
--enable-xlib-render=no \
@@ -282,12 +286,20 @@ B\bBU\bUI\bIL\bLD\bDI\bIN\bNG\bG D\bDE\bEP\bPE\bEN\bND\bDE\bEN\bNC\bCI\bIE\bES\bS
$MAKE
$MAKE install
+ When building on Solaris you may want todo
+
+ ./configure --prefix=$INSTALL_DIR \
+ --enable-xlib=no \
+ --enable-xlib-render=no \
+ --enable-win32=no \
+ CFLAGS="-O3 -fPIC -D_POSIX_PTHREAD_SEMANTICS"
+
_\bB_\bu_\bi_\bl_\bd_\bi_\bn_\bg _\bG_\bl_\bi_\bb
cd $BUILD_DIR
wget http://oss.oetiker.ch/rrdtool/pub/libs/glib-2.15.4.tar.gz
- gunzip -c glib-2.12.13.tar.gz | tar xf -
- cd glib-2.12.13
+ gunzip -c glib-2.15.4.tar.gz | tar xf -
+ cd glib-2.15.4
./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
$MAKE
$MAKE install
@@ -295,15 +307,14 @@ B\bBU\bUI\bIL\bLD\bDI\bIN\bNG\bG D\bDE\bEP\bPE\bEN\bND\bDE\bEN\bNC\bCI\bIE\bES\bS
_\bB_\bu_\bi_\bl_\bd_\bi_\bn_\bg _\bP_\ba_\bn_\bg_\bo
cd $BUILD_DIR
- wget http://oss.oetiker.ch/rrdtool/pub/libs/pango-1.21.1.tar.gz
- gunzip -c pango-1.21.1.tar.gz | tar xf -
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/pango-1.21.1.tar.bz2
+ bunzip2 -c pango-1.21.1.tar.bz2 | tar xf -
cd pango-1.21.1
./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC" --without-x
$MAKE
$MAKE install
- B\bBu\bui\bil\bld\bdi\bin\bng\bg r\brr\brd\bdt\bto\boo\bol\bl (\b(s\bse\bec\bco\bon\bnd\bd t\btr\bry\by)\b)
-
+ B\bBu\bui\bil\bld\bdi\bin\bng\bg r\brr\brd\bdt\bto\boo\bol\bl (\b(s\bse\bec\bco\bon\bnd\bd t\btr\bry\by)\b)
Now all the dependent libraries are built and you can try again. This
time you tell configure where it should be looking for libraries and
include files. This is done via environment variables. Depending on the
@@ -312,19 +323,19 @@ B\bBU\bUI\bIL\bLD\bDI\bIN\bNG\bG D\bDE\bEP\bPE\bEN\bND\bDE\bEN\bNC\bCI\bIE\bES\bS
And finally try building again. We disable the python and tcl bindings
because it seems that a fair number of people have ill configured
- python and tcl setups that would prevent rrdtool from building if they
+ python and tcl setups that would prevent RRDtool from building if they
are included in their current state.
- cd $BUILD_DIR/rrdtool-1.3.1
+ cd $BUILD_DIR/rrdtool-1.4.8
./configure --prefix=$INSTALL_DIR --disable-tcl --disable-python
$MAKE clean
$MAKE
$MAKE install
- SOLARIS HINT: if you want to build the perl module for the native perl
+ SOLARIS HINT: if you want to build the Perl module for the native Perl
(the one shipping with Solaris) you will need the Sun Forte compiler
- installed on your box or you have to hand-tune bind-
- ings/perl-shared/Makefile while building!
+ installed on your box or you have to hand-tune
+ bindings/perl-shared/Makefile while building!
Now go to _\b$_\bI_\bN_\bS_\bT_\bA_\bL_\bL_\b__\bD_\bI_\bR/\b/s\bsh\bha\bar\bre\be/\b/r\brr\brd\bdt\bto\boo\bol\bl/\b/e\bex\bxa\bam\bmp\bpl\ble\bes\bs/\b/ and run them to see if
your build has been successful.
-1.3.1 2008-07-23 RRDBUILD(1)
+1.4.8 2013-05-23 RRDBUILD(1)