git-rebase.sh

   1 #!/bin/sh
   2 #
   3 # Copyright (c) 2005 Junio C Hamano.
   4 #
   5
   6 USAGE='[--interactive | -i] [-v] [--force-rebase | -f] [--no-ff] [--onto <newbase>] (<upstream>|--root) [<branch>] [--quiet | -q]'
   7 LONG_USAGE='git-rebase replaces <branch> with a new branch of the
   8 same name.  When the --onto option is provided the new branch starts
   9 out with a HEAD equal to <newbase>, otherwise it is equal to <upstream>
  10 It then attempts to create a new commit for each commit from the original
  11 <branch> that does not exist in the <upstream> branch.
  12
  13 It is possible that a merge failure will prevent this process from being
  14 completely automatic.  You will have to resolve any such merge failure
  15 and run git rebase --continue.  Another option is to bypass the commit
  16 that caused the merge failure with git rebase --skip.  To restore the
  17 original <branch> and remove the .git/rebase-apply working files, use the
  18 command git rebase --abort instead.
  19
  20 Note that if <branch> is not specified on the command line, the
  21 currently checked out branch is used.
  22
  23 Example:       git-rebase master~1 topic
  24
  25         A---B---C topic                   A'\''--B'\''--C'\'' topic
  26        /                   -->           /
  27   D---E---F---G master          D---E---F---G master
  28 '
  29
  30 SUBDIRECTORY_OK=Yes
  31 OPTIONS_SPEC=
  32 . git-sh-setup
  33 set_reflog_action rebase
  34 require_work_tree
  35 cd_to_toplevel
  36
  37 LF='
  38 '
  39 OK_TO_SKIP_PRE_REBASE=
  40 RESOLVEMSG="
  41 When you have resolved this problem run \"git rebase --continue\".
  42 If you would prefer to skip this patch, instead run \"git rebase --skip\".
  43 To restore the original branch and stop rebasing run \"git rebase --abort\".
  44 "
  45 unset newbase
  46 strategy=recursive
  47 do_merge=
  48 dotest="$GIT_DIR"/rebase-merge
  49 prec=4
  50 verbose=
  51 diffstat=$(git config --bool rebase.stat)
  52 git_am_opt=
  53 rebase_root=
  54 force_rebase=
  55 allow_rerere_autoupdate=
  56
  57 continue_merge () {
  58         test -n "$prev_head" || die "prev_head must be defined"
  59         test -d "$dotest" || die "$dotest directory does not exist"
  60
  61         unmerged=$(git ls-files -u)
  62         if test -n "$unmerged"
  63         then
  64                 echo "You still have unmerged paths in your index"
  65                 echo "did you forget to use git add?"
  66                 die "$RESOLVEMSG"
  67         fi
  68
  69         cmt=`cat "$dotest/current"`
  70         if ! git diff-index --quiet --ignore-submodules HEAD --
  71         then
  72                 if ! git commit --no-verify -C "$cmt"
  73                 then
  74                         echo "Commit failed, please do not call \"git commit\""
  75                         echo "directly, but instead do one of the following: "
  76                         die "$RESOLVEMSG"
  77                 fi
  78                 if test -z "$GIT_QUIET"
  79                 then
  80                         printf "Committed: %0${prec}d " $msgnum
  81                 fi
  82                 echo "$cmt $(git rev-parse HEAD^0)" >> "$dotest/rewritten"
  83         else
  84                 if test -z "$GIT_QUIET"
  85                 then
  86                         printf "Already applied: %0${prec}d " $msgnum
  87                 fi
  88         fi
  89         test -z "$GIT_QUIET" &&
  90         GIT_PAGER='' git log --format=%s -1 "$cmt"
  91
  92         prev_head=`git rev-parse HEAD^0`
  93         # save the resulting commit so we can read-tree on it later
  94         echo "$prev_head" > "$dotest/prev_head"
  95
  96         # onto the next patch:
  97         msgnum=$(($msgnum + 1))
  98         echo "$msgnum" >"$dotest/msgnum"
  99 }
 100
 101 call_merge () {
 102         cmt="$(cat "$dotest/cmt.$1")"
 103         echo "$cmt" > "$dotest/current"
 104         hd=$(git rev-parse --verify HEAD)
 105         cmt_name=$(git symbolic-ref HEAD 2> /dev/null || echo HEAD)
 106         msgnum=$(cat "$dotest/msgnum")
 107         end=$(cat "$dotest/end")
 108         eval GITHEAD_$cmt='"${cmt_name##refs/heads/}~$(($end - $msgnum))"'
 109         eval GITHEAD_$hd='$(cat "$dotest/onto_name")'
 110         export GITHEAD_$cmt GITHEAD_$hd
 111         if test -n "$GIT_QUIET"
 112         then
 113                 export GIT_MERGE_VERBOSITY=1
 114         fi
 115         git-merge-$strategy "$cmt^" -- "$hd" "$cmt"
 116         rv=$?
 117         case "$rv" in
 118         0)
 119                 unset GITHEAD_$cmt GITHEAD_$hd
 120                 return
 121                 ;;
 122         1)
 123                 git rerere $allow_rerere_autoupdate
 124                 die "$RESOLVEMSG"
 125                 ;;
 126         2)
 127                 echo "Strategy: $rv $strategy failed, try another" 1>&2
 128                 die "$RESOLVEMSG"
 129                 ;;
 130         *)
 131                 die "Unknown exit code ($rv) from command:" \
 132                         "git-merge-$strategy $cmt^ -- HEAD $cmt"
 133                 ;;
 134         esac
 135 }
 136
 137 move_to_original_branch () {
 138         test -z "$head_name" &&
 139                 head_name="$(cat "$dotest"/head-name)" &&
 140                 onto="$(cat "$dotest"/onto)" &&
 141                 orig_head="$(cat "$dotest"/orig-head)"
 142         case "$head_name" in
 143         refs/*)
 144                 message="rebase finished: $head_name onto $onto"
 145                 git update-ref -m "$message" \
 146                         $head_name $(git rev-parse HEAD) $orig_head &&
 147                 git symbolic-ref HEAD $head_name ||
 148                 die "Could not move back to $head_name"
 149                 ;;
 150         esac
 151 }
 152
 153 finish_rb_merge () {
 154         move_to_original_branch
 155         git notes copy --for-rewrite=rebase < "$dotest"/rewritten
 156         if test -x "$GIT_DIR"/hooks/post-rewrite &&
 157                 test -s "$dotest"/rewritten; then
 158                 "$GIT_DIR"/hooks/post-rewrite rebase < "$dotest"/rewritten
 159         fi
 160         rm -r "$dotest"
 161         say All done.
 162 }
 163
 164 is_interactive () {
 165         while test $# != 0
 166         do
 167                 case "$1" in
 168                         -i|--interactive)
 169                                 interactive_rebase=explicit
 170                                 break
 171                         ;;
 172                         -p|--preserve-merges)
 173                                 interactive_rebase=implied
 174                         ;;
 175                 esac
 176                 shift
 177         done
 178
 179         if [ "$interactive_rebase" = implied ]; then
 180                 GIT_EDITOR=:
 181                 export GIT_EDITOR
 182         fi
 183
 184         test -n "$interactive_rebase" || test -f "$dotest"/interactive
 185 }
 186
 187 run_pre_rebase_hook () {
 188         if test -z "$OK_TO_SKIP_PRE_REBASE" &&
 189            test -x "$GIT_DIR/hooks/pre-rebase"
 190         then
 191                 "$GIT_DIR/hooks/pre-rebase" ${1+"$@"} ||
 192                 die "The pre-rebase hook refused to rebase."
 193         fi
 194 }
 195
 196 test -f "$GIT_DIR"/rebase-apply/applying &&
 197         die 'It looks like git-am is in progress. Cannot rebase.'
 198
 199 is_interactive "$@" && exec git-rebase--interactive "$@"
 200
 201 while test $# != 0
 202 do
 203         case "$1" in
 204         --no-verify)
 205                 OK_TO_SKIP_PRE_REBASE=yes
 206                 ;;
 207         --continue)
 208                 test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
 209                         die "No rebase in progress?"
 210
 211                 git diff-files --quiet --ignore-submodules || {
 212                         echo "You must edit all merge conflicts and then"
 213                         echo "mark them as resolved using git add"
 214                         exit 1
 215                 }
 216                 if test -d "$dotest"
 217                 then
 218                         prev_head=$(cat "$dotest/prev_head")
 219                         end=$(cat "$dotest/end")
 220                         msgnum=$(cat "$dotest/msgnum")
 221                         onto=$(cat "$dotest/onto")
 222                         GIT_QUIET=$(cat "$dotest/quiet")
 223                         continue_merge
 224                         while test "$msgnum" -le "$end"
 225                         do
 226                                 call_merge "$msgnum"
 227                                 continue_merge
 228                         done
 229                         finish_rb_merge
 230                         exit
 231                 fi
 232                 head_name=$(cat "$GIT_DIR"/rebase-apply/head-name) &&
 233                 onto=$(cat "$GIT_DIR"/rebase-apply/onto) &&
 234                 orig_head=$(cat "$GIT_DIR"/rebase-apply/orig-head) &&
 235                 GIT_QUIET=$(cat "$GIT_DIR"/rebase-apply/quiet)
 236                 git am --resolved --3way --resolvemsg="$RESOLVEMSG" &&
 237                 move_to_original_branch
 238                 exit
 239                 ;;
 240         --skip)
 241                 test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
 242                         die "No rebase in progress?"
 243
 244                 git reset --hard HEAD || exit $?
 245                 if test -d "$dotest"
 246                 then
 247                         git rerere clear
 248                         prev_head=$(cat "$dotest/prev_head")
 249                         end=$(cat "$dotest/end")
 250                         msgnum=$(cat "$dotest/msgnum")
 251                         msgnum=$(($msgnum + 1))
 252                         onto=$(cat "$dotest/onto")
 253                         GIT_QUIET=$(cat "$dotest/quiet")
 254                         while test "$msgnum" -le "$end"
 255                         do
 256                                 call_merge "$msgnum"
 257                                 continue_merge
 258                         done
 259                         finish_rb_merge
 260                         exit
 261                 fi
 262                 head_name=$(cat "$GIT_DIR"/rebase-apply/head-name) &&
 263                 onto=$(cat "$GIT_DIR"/rebase-apply/onto) &&
 264                 orig_head=$(cat "$GIT_DIR"/rebase-apply/orig-head) &&
 265                 GIT_QUIET=$(cat "$GIT_DIR"/rebase-apply/quiet)
 266                 git am -3 --skip --resolvemsg="$RESOLVEMSG" &&
 267                 move_to_original_branch
 268                 exit
 269                 ;;
 270         --abort)
 271                 test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
 272                         die "No rebase in progress?"
 273
 274                 git rerere clear
 275                 if test -d "$dotest"
 276                 then
 277                         GIT_QUIET=$(cat "$dotest/quiet")
 278                         move_to_original_branch
 279                 else
 280                         dotest="$GIT_DIR"/rebase-apply
 281                         GIT_QUIET=$(cat "$dotest/quiet")
 282                         move_to_original_branch
 283                 fi
 284                 git reset --hard $(cat "$dotest/orig-head")
 285                 rm -r "$dotest"
 286                 exit
 287                 ;;
 288         --onto)
 289                 test 2 -le "$#" || usage
 290                 newbase="$2"
 291                 shift
 292                 ;;
 293         -M|-m|--m|--me|--mer|--merg|--merge)
 294                 do_merge=t
 295                 ;;
 296         -s=*|--s=*|--st=*|--str=*|--stra=*|--strat=*|--strate=*|\
 297                 --strateg=*|--strategy=*|\
 298         -s|--s|--st|--str|--stra|--strat|--strate|--strateg|--strategy)
 299                 case "$#,$1" in
 300                 *,*=*)
 301                         strategy=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
 302                 1,*)
 303                         usage ;;
 304                 *)
 305                         strategy="$2"
 306                         shift ;;
 307                 esac
 308                 do_merge=t
 309                 ;;
 310         -n|--no-stat)
 311                 diffstat=
 312                 ;;
 313         --stat)
 314                 diffstat=t
 315                 ;;
 316         -v|--verbose)
 317                 verbose=t
 318                 diffstat=t
 319                 GIT_QUIET=
 320                 ;;
 321         -q|--quiet)
 322                 GIT_QUIET=t
 323                 git_am_opt="$git_am_opt -q"
 324                 verbose=
 325                 diffstat=
 326                 ;;
 327         --whitespace=*)
 328                 git_am_opt="$git_am_opt $1"
 329                 case "$1" in
 330                 --whitespace=fix|--whitespace=strip)
 331                         force_rebase=t
 332                         ;;
 333                 esac
 334                 ;;
 335         --ignore-whitespace)
 336                 git_am_opt="$git_am_opt $1"
 337                 ;;
 338         --committer-date-is-author-date|--ignore-date)
 339                 git_am_opt="$git_am_opt $1"
 340                 force_rebase=t
 341                 ;;
 342         -C*)
 343                 git_am_opt="$git_am_opt $1"
 344                 ;;
 345         --root)
 346                 rebase_root=t
 347                 ;;
 348         -f|--f|--fo|--for|--forc|force|--force-r|--force-re|--force-reb|--force-reba|--force-rebas|--force-rebase|--no-ff)
 349                 force_rebase=t
 350                 ;;
 351         --rerere-autoupdate|--no-rerere-autoupdate)
 352                 allow_rerere_autoupdate="$1"
 353                 ;;
 354         -*)
 355                 usage
 356                 ;;
 357         *)
 358                 break
 359                 ;;
 360         esac
 361         shift
 362 done
 363 test $# -gt 2 && usage
 364
 365 if test $# -eq 0 && test -z "$rebase_root"
 366 then
 367         test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply || usage
 368         test -d "$dotest" -o -f "$GIT_DIR"/rebase-apply/rebasing &&
 369                 die 'A rebase is in progress, try --continue, --skip or --abort.'
 370 fi
 371
 372 # Make sure we do not have $GIT_DIR/rebase-apply
 373 if test -z "$do_merge"
 374 then
 375         if mkdir "$GIT_DIR"/rebase-apply 2>/dev/null
 376         then
 377                 rmdir "$GIT_DIR"/rebase-apply
 378         else
 379                 echo >&2 '
 380 It seems that I cannot create a rebase-apply directory, and
 381 I wonder if you are in the middle of patch application or another
 382 rebase.  If that is not the case, please
 383         rm -fr '"$GIT_DIR"'/rebase-apply
 384 and run me again.  I am stopping in case you still have something
 385 valuable there.'
 386                 exit 1
 387         fi
 388 else
 389         if test -d "$dotest"
 390         then
 391                 die "previous rebase directory $dotest still exists." \
 392                         'Try git rebase (--continue | --abort | --skip)'
 393         fi
 394 fi
 395
 396 # The tree must be really really clean.
 397 if ! git update-index --ignore-submodules --refresh > /dev/null; then
 398         echo >&2 "cannot rebase: you have unstaged changes"
 399         git diff-files --name-status -r --ignore-submodules -- >&2
 400         exit 1
 401 fi
 402 diff=$(git diff-index --cached --name-status -r --ignore-submodules HEAD --)
 403 case "$diff" in
 404 ?*)     echo >&2 "cannot rebase: your index contains uncommitted changes"
 405         echo >&2 "$diff"
 406         exit 1
 407         ;;
 408 esac
 409
 410 if test -z "$rebase_root"
 411 then
 412         # The upstream head must be given.  Make sure it is valid.
 413         upstream_name="$1"
 414         shift
 415         upstream=`git rev-parse --verify "${upstream_name}^0"` ||
 416         die "invalid upstream $upstream_name"
 417         unset root_flag
 418         upstream_arg="$upstream_name"
 419 else
 420         test -z "$newbase" && die "--root must be used with --onto"
 421         unset upstream_name
 422         unset upstream
 423         root_flag="--root"
 424         upstream_arg="$root_flag"
 425 fi
 426
 427 # Make sure the branch to rebase onto is valid.
 428 onto_name=${newbase-"$upstream_name"}
 429 case "$onto_name" in
 430 *...*)
 431         if      left=${onto_name%...*} right=${onto_name#*...} &&
 432                 onto=$(git merge-base --all ${left:-HEAD} ${right:-HEAD})
 433         then
 434                 case "$onto" in
 435                 ?*"$LF"?*)
 436                         die "$onto_name: there are more than one merge bases"
 437                         ;;
 438                 '')
 439                         die "$onto_name: there is no merge base"
 440                         ;;
 441                 esac
 442         else
 443                 die "$onto_name: there is no merge base"
 444         fi
 445         ;;
 446 *)
 447         onto=$(git rev-parse --verify "${onto_name}^0") || exit
 448         ;;
 449 esac
 450
 451 # If a hook exists, give it a chance to interrupt
 452 run_pre_rebase_hook "$upstream_arg" "$@"
 453
 454 # If the branch to rebase is given, that is the branch we will rebase
 455 # $branch_name -- branch being rebased, or HEAD (already detached)
 456 # $orig_head -- commit object name of tip of the branch before rebasing
 457 # $head_name -- refs/heads/<that-branch> or "detached HEAD"
 458 switch_to=
 459 case "$#" in
 460 1)
 461         # Is it "rebase other $branchname" or "rebase other $commit"?
 462         branch_name="$1"
 463         switch_to="$1"
 464
 465         if git show-ref --verify --quiet -- "refs/heads/$1" &&
 466            branch=$(git rev-parse -q --verify "refs/heads/$1")
 467         then
 468                 head_name="refs/heads/$1"
 469         elif branch=$(git rev-parse -q --verify "$1")
 470         then
 471                 head_name="detached HEAD"
 472         else
 473                 usage
 474         fi
 475         ;;
 476 *)
 477         # Do not need to switch branches, we are already on it.
 478         if branch_name=`git symbolic-ref -q HEAD`
 479         then
 480                 head_name=$branch_name
 481                 branch_name=`expr "z$branch_name" : 'zrefs/heads/\(.*\)'`
 482         else
 483                 head_name="detached HEAD"
 484                 branch_name=HEAD ;# detached
 485         fi
 486         branch=$(git rev-parse --verify "${branch_name}^0") || exit
 487         ;;
 488 esac
 489 orig_head=$branch
 490
 491 # Now we are rebasing commits $upstream..$branch (or with --root,
 492 # everything leading up to $branch) on top of $onto
 493
 494 # Check if we are already based on $onto with linear history,
 495 # but this should be done only when upstream and onto are the same.
 496 mb=$(git merge-base "$onto" "$branch")
 497 if test "$upstream" = "$onto" && test "$mb" = "$onto" &&
 498         # linear history?
 499         ! (git rev-list --parents "$onto".."$branch" | sane_grep " .* ") > /dev/null
 500 then
 501         if test -z "$force_rebase"
 502         then
 503                 # Lazily switch to the target branch if needed...
 504                 test -z "$switch_to" || git checkout "$switch_to"
 505                 say "Current branch $branch_name is up to date."
 506                 exit 0
 507         else
 508                 say "Current branch $branch_name is up to date, rebase forced."
 509         fi
 510 fi
 511
 512 # Detach HEAD and reset the tree
 513 say "First, rewinding head to replay your work on top of it..."
 514 git checkout -q "$onto^0" || die "could not detach HEAD"
 515 git update-ref ORIG_HEAD $branch
 516
 517 if test -n "$diffstat"
 518 then
 519         if test -n "$verbose"
 520         then
 521                 echo "Changes from $mb to $onto:"
 522         fi
 523         # We want color (if set), but no pager
 524         GIT_PAGER='' git diff --stat --summary "$mb" "$onto"
 525 fi
 526
 527 # If the $onto is a proper descendant of the tip of the branch, then
 528 # we just fast-forwarded.
 529 if test "$mb" = "$branch"
 530 then
 531         say "Fast-forwarded $branch_name to $onto_name."
 532         move_to_original_branch
 533         exit 0
 534 fi
 535
 536 if test -n "$rebase_root"
 537 then
 538         revisions="$onto..$orig_head"
 539 else
 540         revisions="$upstream..$orig_head"
 541 fi
 542
 543 if test -z "$do_merge"
 544 then
 545         git format-patch -k --stdout --full-index --ignore-if-in-upstream \
 546                 $root_flag "$revisions" |
 547         git am $git_am_opt --rebasing --resolvemsg="$RESOLVEMSG" &&
 548         move_to_original_branch
 549         ret=$?
 550         test 0 != $ret -a -d "$GIT_DIR"/rebase-apply &&
 551                 echo $head_name > "$GIT_DIR"/rebase-apply/head-name &&
 552                 echo $onto > "$GIT_DIR"/rebase-apply/onto &&
 553                 echo $orig_head > "$GIT_DIR"/rebase-apply/orig-head &&
 554                 echo "$GIT_QUIET" > "$GIT_DIR"/rebase-apply/quiet
 555         exit $ret
 556 fi
 557
 558 # start doing a rebase with git-merge
 559 # this is rename-aware if the recursive (default) strategy is used
 560
 561 mkdir -p "$dotest"
 562 echo "$onto" > "$dotest/onto"
 563 echo "$onto_name" > "$dotest/onto_name"
 564 prev_head=$orig_head
 565 echo "$prev_head" > "$dotest/prev_head"
 566 echo "$orig_head" > "$dotest/orig-head"
 567 echo "$head_name" > "$dotest/head-name"
 568 echo "$GIT_QUIET" > "$dotest/quiet"
 569
 570 msgnum=0
 571 for cmt in `git rev-list --reverse --no-merges "$revisions"`
 572 do
 573         msgnum=$(($msgnum + 1))
 574         echo "$cmt" > "$dotest/cmt.$msgnum"
 575 done
 576
 577 echo 1 >"$dotest/msgnum"
 578 echo $msgnum >"$dotest/end"
 579
 580 end=$msgnum
 581 msgnum=1
 582
 583 while test "$msgnum" -le "$end"
 584 do
 585         call_merge "$msgnum"
 586         continue_merge
 587 done
 588
 589 finish_rb_merge