![[tokkee]](http://tokkee.org/images/avatar.png){kind=avatar}
diff --git a/po/bn.po b/po/bn.po
index 3abc36e19b62e44e2817d5f0478c8c5e6c1f75cc..8b940f117ed83380de8319de8866e92067d2ea1a 100644 (file)
--- a/po/bn.po
+++ b/po/bn.po
msgstr ""
"Project-Id-Version: inkscape\n"
"Report-Msgid-Bugs-To: inkscape-devel@lists.sourceforge.net\n"
-"POT-Creation-Date: 2009-09-04 22:28+0200\n"
+"POT-Creation-Date: 2009-09-06 10:44+0200\n"
"PO-Revision-Date: 2007-02-10 15:23+0100\n"
"Last-Translator: Khandakar Mujahidul Islam <suzan@bengalinux.org>\n"
"Language-Team: Bengali <core@bengalinux.org>\n"
msgstr ""
#: ../src/dialogs/object-attributes.cpp:43
-#: ../share/extensions/polyhedron_3d.inx.h:37
msgid "Show:"
msgstr ""
msgid "Memory document %d"
msgstr ""
-#: ../src/document.cpp:647
+#: ../src/document.cpp:628
#, c-format
msgid "Unnamed document %d"
msgstr ""
#: ../src/helper/units.cpp:37 ../src/live_effects/lpe-ruler.cpp:43
#: ../share/extensions/foldablebox.inx.h:8
#: ../share/extensions/interp_att_g.inx.h:24
-#: ../share/extensions/printing-marks.inx.h:20
+#: ../share/extensions/printing-marks.inx.h:19
msgid "Unit"
msgstr ""
#. FIXME: top/bottom names are inverted in the UI/svg and in the code!!
#: ../src/live_effects/lpe-rough-hatches.cpp:229
-msgid "Half turns smoothness: 1st side, in"
+msgid "Half-turns smoothness: 1st side, in"
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:229
msgid ""
-"Set smoothness/sharpness of path when reaching a 'bottom' halfturn. 0=sharp, "
-"1=default"
+"Set smoothness/sharpness of path when reaching a 'bottom' half-turn. "
+"0=sharp, 1=default"
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:230
#: ../src/live_effects/lpe-rough-hatches.cpp:230
msgid ""
-"Set smoothness/sharpness of path when leaving a 'bottom' halfturn. 0=sharp, "
+"Set smoothness/sharpness of path when leaving a 'bottom' half-turn. 0=sharp, "
"1=default"
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:231
msgid ""
-"Set smoothness/sharpness of path when reaching a 'top' halfturn. 0=sharp, "
+"Set smoothness/sharpness of path when reaching a 'top' half-turn. 0=sharp, "
"1=default"
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:232
msgid ""
-"Set smoothness/sharpness of path when leaving a 'top' halfturn. 0=sharp, "
+"Set smoothness/sharpness of path when leaving a 'top' half-turn. 0=sharp, "
"1=default"
msgstr ""
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:233
-msgid "Randomly moves 'bottom' halfsturns to produce magnitude variations."
+msgid "Randomly moves 'bottom' half-turns to produce magnitude variations."
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:234
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:234
-msgid "Randomly moves 'top' halfsturns to produce magnitude variations."
+msgid "Randomly moves 'top' half-turns to produce magnitude variations."
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:235
#: ../src/live_effects/lpe-rough-hatches.cpp:235
msgid ""
-"Add direction randomness by moving 'bottom' halfsturns tangentially to the "
+"Add direction randomness by moving 'bottom' half-turns tangentially to the "
"boundary."
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:236
msgid ""
-"Add direction randomness by randomly moving 'top' halfsturns tangentially to "
+"Add direction randomness by randomly moving 'top' half-turns tangentially to "
"the boundary."
msgstr ""
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:237
-msgid "Randomness of 'bottom' halfturns smoothness"
+msgid "Randomness of 'bottom' half-turns smoothness"
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:238
-msgid "Randomness of 'top' halfturns smoothness"
+msgid "Randomness of 'top' half-turns smoothness"
msgstr ""
#.
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:240
-msgid "Simulate a stroke of varrying width"
+msgid "Simulate a stroke of varying width"
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:241
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:242
-msgid "Width at 'bottom' half turns"
+msgid "Width at 'bottom' half-turns"
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:243
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:243
-msgid "Width at 'top' halfturns"
+msgid "Width at 'top' half-turns"
msgstr ""
#.
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:245
-#: ../src/live_effects/lpe-rough-hatches.cpp:246
-msgid "Width of paths from 'top' to 'bottom' halfturns"
+msgid "Width from 'top' to 'bottom'"
msgstr ""
#: ../src/live_effects/lpe-rough-hatches.cpp:246
msgid "from 1st to 2nd side"
msgstr ""
+#: ../src/live_effects/lpe-rough-hatches.cpp:246
+msgid "Width from 'bottom' to 'top'"
+msgstr ""
+
#: ../src/live_effects/lpe-rough-hatches.cpp:248
msgid "Hatches width and dir"
msgstr ""
"amount"
msgstr ""
-#: ../src/live_effects/lpe-ruler.cpp:27 ../share/extensions/restack.inx.h:7
+#: ../src/live_effects/lpe-ruler.cpp:27
msgid "Left"
msgstr ""
-#: ../src/live_effects/lpe-ruler.cpp:28 ../share/extensions/restack.inx.h:14
+#: ../src/live_effects/lpe-ruler.cpp:28
#, fuzzy
msgid "Right"
msgstr "উজ্জলতা"
msgstr ""
#: ../src/live_effects/lpe-vonkoch.cpp:52
-msgid "The reference segment. Defaults to bbox diameter."
+msgid "The reference segment. Defaults to the horizontal midline of the bbox."
msgstr ""
#. refA(_("Ref Start"), _("Left side middle of the reference box"), "refA", &wr, this),
#: ../src/object-edit.cpp:933
msgid ""
-"Position the <b>start point</b> of the arc or segment; with <b>Ctrl</b>to "
+"Position the <b>start point</b> of the arc or segment; with <b>Ctrl</b> to "
"snap angle; drag <b>inside</b> the ellipse for arc, <b>outside</b> for "
"segment"
msgstr ""
#: ../src/ui/dialog/filedialogimpl-gtkmm.cpp:1414
#: ../src/ui/dialog/icon-preview.cpp:178
#: ../src/widgets/desktop-widget.cpp:1573
-#: ../share/extensions/printing-marks.inx.h:16
msgid "Selection"
msgstr ""
#: ../src/ui/dialog/extension-editor.cpp:81
#: ../share/extensions/draw_from_triangle.inx.h:20
-#: ../share/extensions/dxf_input.inx.h:5
-#: ../share/extensions/dxf_outlines.inx.h:4
+#: ../share/extensions/dxf_input.inx.h:9
+#: ../share/extensions/dxf_outlines.inx.h:8
#: ../share/extensions/lindenmayer.inx.h:23
#: ../share/extensions/measure.inx.h:2
#, fuzzy
#: ../src/ui/dialog/filter-effects-dialog.cpp:2165
#: ../src/widgets/toolbox.cpp:3859 ../src/widgets/toolbox.cpp:4250
-#: ../share/extensions/extrude.inx.h:3
+#: ../share/extensions/extrude.inx.h:4
msgid "Mode:"
msgstr ""
msgid ""
"Postpone snapping as long as the mouse is moving, and then wait an "
"additional fraction of a second. This additional delay is specified here. "
-"When set to zero or to a very small number, snapping will be immediate"
+"When set to zero or to a very small number, snapping will be immediate."
msgstr ""
#: ../src/ui/dialog/inkscape-preferences.cpp:225
msgstr ""
#: ../src/ui/dialog/inkscape-preferences.cpp:227
-msgid "Only try to snap the node that is initialy closest to the mouse pointer"
+msgid ""
+"Only try to snap the node that is initially closest to the mouse pointer"
msgstr ""
#: ../src/ui/dialog/inkscape-preferences.cpp:230
msgstr ""
#: ../src/ui/dialog/inkscape-preferences.cpp:914
+#: ../src/widgets/sp-color-icc-selector.cpp:306
+#: ../src/widgets/sp-color-icc-selector.cpp:579
msgid "<none>"
msgstr ""
msgid "New"
msgstr "নতুন (_ন)"
-#: ../src/ui/dialog/layers.cpp:657 ../share/extensions/restack.inx.h:16
+#: ../src/ui/dialog/layers.cpp:657
msgid "Top"
msgstr ""
#. ## end option page
#: ../src/ui/dialog/tracedialog.cpp:617 ../src/ui/dialog/tracedialog.cpp:623
-#: ../share/extensions/dxf_input.inx.h:7
-#: ../share/extensions/dxf_outlines.inx.h:5
+#: ../share/extensions/dxf_input.inx.h:11
+#: ../share/extensions/dxf_outlines.inx.h:9
msgid "Options"
msgstr ""
"is no selection"
msgstr ""
-#: ../src/ui/widget/page-sizer.cpp:369
+#: ../src/ui/widget/page-sizer.cpp:357
msgid "Set page size"
msgstr ""
msgstr ""
#: ../share/extensions/draw_from_triangle.py:178
-msgid "Angle 'A'/radians:"
+msgid "Angle 'A'/radians: "
msgstr ""
#: ../share/extensions/draw_from_triangle.py:179
msgstr ""
#: ../share/extensions/extractimage.py:66
-msgid "Difficulty finding the image data."
+msgid "Unable to find image data."
msgstr ""
#: ../share/extensions/inkex.py:66
#: ../share/extensions/pathalongpath.py:197
#: ../share/extensions/pathscatter.py:208
#: ../share/extensions/perspective.py:61
-#: ../share/extensions/summersnight.py:36
msgid "This extension requires two selected paths."
msgstr ""
msgstr ""
#: ../share/extensions/perspective.py:68
-#: ../share/extensions/summersnight.py:45
+#: ../share/extensions/summersnight.py:43
#, python-format
msgid ""
"The first selected object is of type '%s'.\n"
msgstr ""
#: ../share/extensions/perspective.py:74
-#: ../share/extensions/summersnight.py:52
+#: ../share/extensions/summersnight.py:50
msgid ""
"This extension requires that the second selected path be four nodes long."
msgstr ""
#: ../share/extensions/perspective.py:99
-#: ../share/extensions/summersnight.py:84
+#: ../share/extensions/summersnight.py:82
msgid ""
"The second selected object is a group, not a path.\n"
"Try using the procedure Object->Ungroup."
msgstr ""
#: ../share/extensions/perspective.py:101
-#: ../share/extensions/summersnight.py:86
+#: ../share/extensions/summersnight.py:84
msgid ""
"The second selected object is not a path.\n"
"Try using the procedure Path->Object to Path."
msgstr ""
#: ../share/extensions/perspective.py:104
-#: ../share/extensions/summersnight.py:89
+#: ../share/extensions/summersnight.py:87
msgid ""
"The first selected object is not a path.\n"
"Try using the procedure Path->Object to Path."
#: ../share/extensions/polyhedron_3d.py:60
msgid ""
"Failed to import the numpy module. This module is required by this "
-"extension. Please install them and try again. On a Debian-like system this "
+"extension. Please install it and try again. On a Debian-like system this "
"can be done with the command, sudo apt-get install python-numpy."
msgstr ""
msgid "Internal Error. No view type selected\n"
msgstr ""
-#: ../share/extensions/summersnight.py:38
-msgid "The second path must be exactly four nodes long."
+#: ../share/extensions/summersnight.py:36
+msgid ""
+"This extension requires two selected paths. \n"
+"The second path must be exactly four nodes long."
msgstr ""
#: ../share/extensions/svg_and_media_zip_output.py:125
msgstr ""
#: ../share/extensions/draw_from_triangle.inx.h:10
-msgid "Draw Circle About This Point"
+msgid "Draw Circle Around This Point"
msgstr ""
#: ../share/extensions/draw_from_triangle.inx.h:11
@@ -20531,65 +20536,101 @@ msgid "Symmedians"
msgstr ""
#: ../share/extensions/draw_from_triangle.inx.h:35
+msgid ""
+"This extension draws constructions about a triangle defined by the first 3 "
+"nodes of a selected path. You may select one of preset objects or create "
+"your own ones.\n"
+" \n"
+"All units are the Inkscape's pixel unit. Angles are all in radians.\n"
+"You can specify a point by trilinear coordinates or by a triangle centre "
+"function.\n"
+"Enter as functions of the side length or angles.\n"
+"Trilinear elements should be separated by a colon: ':'.\n"
+"Side lengths are represented as 's_a', 's_b' and 's_c'.\n"
+"Angles corresponding to these are 'a_a', 'a_b', and 'a_c'.\n"
+"You can also use the semi-perimeter and area of the triangle as constants. "
+"Write 'area' or 'semiperim' for these.\n"
+"\n"
+"You can use any standard Python math function:\n"
+"ceil(x); fabs(x); floor(x); fmod(x,y); frexp(x); ldexp(x,i); \n"
+"modf(x); exp(x); log(x [, base]); log10(x); pow(x,y); sqrt(x); \n"
+"acos(x); asin(x); atan(x); atan2(y,x); hypot(x,y); \n"
+"cos(x); sin(x); tan(x); degrees(x); radians(x); \n"
+"cosh(x); sinh(x); tanh(x)\n"
+"\n"
+"Also available are the inverse trigonometric functions:\n"
+"sec(x); csc(x); cot(x)\n"
+"\n"
+"You can specify the radius of a circle about a custom point using an "
+"formula, which may also contain the side lengths, angles, etc. You can also "
+"plot the isogonal and isotomic conjugate of the point. Be aware that this "
+"may cause a divide-by-zero error for certain points.\n"
+" "
+msgstr ""
+
+#: ../share/extensions/draw_from_triangle.inx.h:57
#, fuzzy
msgid "Triangle Function"
msgstr "লাইসেন্স (_ল)"
-#: ../share/extensions/draw_from_triangle.inx.h:36
+#: ../share/extensions/draw_from_triangle.inx.h:58
#, fuzzy
msgid "Trilinear Coordinates"
msgstr "কৃতিত্ব"
#: ../share/extensions/dxf_input.inx.h:1
msgid ""
-"- AutoCAD Release 13 and newer. - assume dxf drawing is in mm. - assume svg "
-"drawing is in pixels, at 90 dpi. - layers are preserved only on File->"
-"Open, not Import. - limited support for BLOCKS, use AutoCAD Explode Blocks "
-"instead, if needed."
+"- AutoCAD Release 13 and newer.\n"
+"- assume dxf drawing is in mm.\n"
+"- assume svg drawing is in pixels, at 90 dpi.\n"
+"- layers are preserved only on File->Open, not Import.\n"
+"- limited support for BLOCKS, use AutoCAD Explode Blocks instead, if needed."
msgstr ""
-#: ../share/extensions/dxf_input.inx.h:2
+#: ../share/extensions/dxf_input.inx.h:6
msgid "AutoCAD DXF R13 (*.dxf)"
msgstr ""
-#: ../share/extensions/dxf_input.inx.h:3
+#: ../share/extensions/dxf_input.inx.h:7
#, fuzzy
msgid "Character Encoding"
msgstr "লাইসেন্স (_ল)"
-#: ../share/extensions/dxf_input.inx.h:4
+#: ../share/extensions/dxf_input.inx.h:8
msgid "DXF Input"
msgstr ""
-#: ../share/extensions/dxf_input.inx.h:6
+#: ../share/extensions/dxf_input.inx.h:10
msgid "Import AutoCAD's Document Exchange Format"
msgstr ""
-#: ../share/extensions/dxf_input.inx.h:8
+#: ../share/extensions/dxf_input.inx.h:12
msgid "Or, use manual scale factor"
msgstr ""
-#: ../share/extensions/dxf_input.inx.h:9
+#: ../share/extensions/dxf_input.inx.h:13
msgid "Use automatic scaling to size A4"
msgstr ""
#: ../share/extensions/dxf_outlines.inx.h:1
msgid ""
-"- AutoCAD Release 13 format. - assume svg drawing is in pixels, at 90 dpi. - "
-"assume dxf drawing is in mm. - only LWPOLYLINE and SPLINE elements are "
-"supported. - ROBO-Master option is a specialized spline readable only by "
-"ROBO-Master and AutoDesk viewers, not Inkscape."
+"- AutoCAD Release 13 format.\n"
+"- assume svg drawing is in pixels, at 90 dpi.\n"
+"- assume dxf drawing is in mm.\n"
+"- only LWPOLYLINE and SPLINE elements are supported.\n"
+"- ROBO-Master option is a specialized spline readable only by ROBO-Master "
+"and AutoDesk viewers, not Inkscape."
msgstr ""
-#: ../share/extensions/dxf_outlines.inx.h:2
+#: ../share/extensions/dxf_outlines.inx.h:6
msgid "Desktop Cutting Plotter"
msgstr ""
-#: ../share/extensions/dxf_outlines.inx.h:3
+#: ../share/extensions/dxf_outlines.inx.h:7
msgid "Desktop Cutting Plotter (R13) (*.dxf)"
msgstr ""
-#: ../share/extensions/dxf_outlines.inx.h:6
+#: ../share/extensions/dxf_outlines.inx.h:10
msgid "enable ROBO-Master output"
msgstr ""
msgid "Extrude"
msgstr ""
+#: ../share/extensions/extrude.inx.h:3
+#, fuzzy
+msgid "Lines"
+msgstr "লাইসেন্স (_ল)"
+
+#: ../share/extensions/extrude.inx.h:5
+msgid "Polygons"
+msgstr ""
+
#: ../share/extensions/fig_input.inx.h:1
msgid "Open files saved with XFIG"
msgstr ""
msgstr ""
#: ../share/extensions/interp_att_g.inx.h:18
-#: ../share/extensions/polyhedron_3d.inx.h:43
+#: ../share/extensions/polyhedron_3d.inx.h:42
msgid "Style"
msgstr ""
#: ../share/extensions/pathalongpath.inx.h:16
msgid ""
"This effect bends a pattern object along arbitrary \"skeleton\" paths. The "
-"pattern is the top most object in the selection. (groups of paths/shapes/"
+"pattern is the topmost object in the selection. (groups of paths/shapes/"
"clones... allowed)"
msgstr ""
#: ../share/extensions/pathscatter.inx.h:14
msgid ""
"This effect scatters a pattern along arbitrary \"skeleton\" paths. The "
-"pattern is the top most object in the selection. (groups of paths/shapes/"
+"pattern is the topmost object in the selection. (groups of paths/shapes/"
"clones... allowed)"
msgstr ""
msgstr ""
#: ../share/extensions/polyhedron_3d.inx.h:4
-msgid "Cuboctohedron"
+msgid "Cuboctahedron"
msgstr ""
#: ../share/extensions/polyhedron_3d.inx.h:5
msgstr "ফাইল (_ফ)"
#: ../share/extensions/polyhedron_3d.inx.h:12
-msgid "Fill Colour (Blue)"
+msgid "Fill Color (Blue)"
msgstr ""
#: ../share/extensions/polyhedron_3d.inx.h:13
-msgid "Fill Colour (Green)"
+msgid "Fill Color (Green)"
msgstr ""
#: ../share/extensions/polyhedron_3d.inx.h:14
-msgid "Fill Colour (Red)"
+msgid "Fill Color (Red)"
msgstr ""
#: ../share/extensions/polyhedron_3d.inx.h:16
msgid "Shading"
msgstr "লাইসেন্স (_ল)"
-#: ../share/extensions/polyhedron_3d.inx.h:38
+#: ../share/extensions/polyhedron_3d.inx.h:37
msgid "Small Triambic Icosahedron"
msgstr ""
-#: ../share/extensions/polyhedron_3d.inx.h:39
+#: ../share/extensions/polyhedron_3d.inx.h:38
msgid "Snub Cube"
msgstr ""
-#: ../share/extensions/polyhedron_3d.inx.h:40
+#: ../share/extensions/polyhedron_3d.inx.h:39
msgid "Snub Dodecahedron"
msgstr ""
-#: ../share/extensions/polyhedron_3d.inx.h:42
+#: ../share/extensions/polyhedron_3d.inx.h:41
#, no-c-format
msgid "Stroke Opacity/ %"
msgstr ""
-#: ../share/extensions/polyhedron_3d.inx.h:44
+#: ../share/extensions/polyhedron_3d.inx.h:43
msgid "Tetrahedron"
msgstr ""
-#: ../share/extensions/polyhedron_3d.inx.h:45
+#: ../share/extensions/polyhedron_3d.inx.h:44
msgid "Then Rotate Around:"
msgstr ""
-#: ../share/extensions/polyhedron_3d.inx.h:46
+#: ../share/extensions/polyhedron_3d.inx.h:45
msgid "Truncated Cube"
msgstr ""
-#: ../share/extensions/polyhedron_3d.inx.h:47
+#: ../share/extensions/polyhedron_3d.inx.h:46
msgid "Truncated Dodecahedron"
msgstr ""
-#: ../share/extensions/polyhedron_3d.inx.h:48
+#: ../share/extensions/polyhedron_3d.inx.h:47
msgid "Truncated Icosahedron"
msgstr ""
-#: ../share/extensions/polyhedron_3d.inx.h:49
+#: ../share/extensions/polyhedron_3d.inx.h:48
msgid "Truncated Octahedron"
msgstr ""
-#: ../share/extensions/polyhedron_3d.inx.h:50
+#: ../share/extensions/polyhedron_3d.inx.h:49
msgid "Truncated Tetrahedron"
msgstr ""
-#: ../share/extensions/polyhedron_3d.inx.h:51
+#. TRANSLATORS: only translate "string" in "context|string".
+#. For more details, see http://developer.gnome.org/doc/API/2.0/glib/glib-I18N.html#Q-:CAPS
+#: ../share/extensions/polyhedron_3d.inx.h:52
msgid "Vertices"
msgstr ""
-#: ../share/extensions/polyhedron_3d.inx.h:52
+#: ../share/extensions/polyhedron_3d.inx.h:53
#, fuzzy
msgid "View"
msgstr "প্রদর্শন (_দ)"
-#: ../share/extensions/polyhedron_3d.inx.h:53
+#: ../share/extensions/polyhedron_3d.inx.h:54
msgid "X-Axis"
msgstr ""
-#: ../share/extensions/polyhedron_3d.inx.h:54
+#: ../share/extensions/polyhedron_3d.inx.h:55
msgid "Y-Axis"
msgstr ""
-#: ../share/extensions/polyhedron_3d.inx.h:55
+#: ../share/extensions/polyhedron_3d.inx.h:56
msgid "Z-Axis"
msgstr ""
-#: ../share/extensions/polyhedron_3d.inx.h:56
+#: ../share/extensions/polyhedron_3d.inx.h:57
msgid "Z-Sort Faces By:"
msgstr ""
+#. TRANSLATORS: only translate "string" in "context|string".
+#. For more details, see http://developer.gnome.org/doc/API/2.0/glib/glib-I18N.html#Q-:CAPS
+#: ../share/extensions/polyhedron_3d.inx.h:60
+msgid "polyhedron|Show:"
+msgstr ""
+
#: ../share/extensions/printing-marks.inx.h:1
msgid "Bleed Margin"
msgstr ""
#: ../share/extensions/printing-marks.inx.h:5
#, fuzzy
-msgid "Colour Bars"
+msgid "Color Bars"
msgstr "বন্ধ"
#: ../share/extensions/printing-marks.inx.h:6
msgid "Right:"
msgstr "উজ্জলতা"
-#: ../share/extensions/printing-marks.inx.h:17
+#: ../share/extensions/printing-marks.inx.h:16
msgid "Set crop marks to"
msgstr ""
-#: ../share/extensions/printing-marks.inx.h:18
+#: ../share/extensions/printing-marks.inx.h:17
msgid "Star Target"
msgstr ""
-#: ../share/extensions/printing-marks.inx.h:19
+#: ../share/extensions/printing-marks.inx.h:18
msgid "Top:"
msgstr ""
msgstr ""
#: ../share/extensions/restack.inx.h:4
-msgid "Bottom"
-msgstr ""
-
-#: ../share/extensions/restack.inx.h:5
msgid "Bottom to Top (90)"
msgstr ""
-#: ../share/extensions/restack.inx.h:6
+#: ../share/extensions/restack.inx.h:5
msgid "Horizontal Point:"
msgstr ""
-#: ../share/extensions/restack.inx.h:8
+#: ../share/extensions/restack.inx.h:6
msgid "Left to Right (0)"
msgstr ""
-#: ../share/extensions/restack.inx.h:9
-#, fuzzy
-msgid "Middle"
-msgstr "ফাইল (_ফ)"
-
-#: ../share/extensions/restack.inx.h:10
+#: ../share/extensions/restack.inx.h:7
msgid "Radial Inward"
msgstr ""
-#: ../share/extensions/restack.inx.h:11
+#: ../share/extensions/restack.inx.h:8
msgid "Radial Outward"
msgstr ""
-#: ../share/extensions/restack.inx.h:12
+#: ../share/extensions/restack.inx.h:9
#, fuzzy
msgid "Restack"
msgstr "টেক্সট (_ট)"
-#: ../share/extensions/restack.inx.h:13
+#: ../share/extensions/restack.inx.h:10
msgid "Restack Direction:"
msgstr ""
-#: ../share/extensions/restack.inx.h:15
+#: ../share/extensions/restack.inx.h:11
msgid "Right to Left (180)"
msgstr ""
-#: ../share/extensions/restack.inx.h:17
+#: ../share/extensions/restack.inx.h:12
msgid "Top to Bottom (270)"
msgstr ""
-#: ../share/extensions/restack.inx.h:18
+#: ../share/extensions/restack.inx.h:13
msgid "Vertical Point:"
msgstr ""
+#: ../share/extensions/restack.inx.h:14
+msgid "restack|Bottom"
+msgstr ""
+
+#. TRANSLATORS: only translate "string" in "context|string".
+#. For more details, see http://developer.gnome.org/doc/API/2.0/glib/glib-I18N.html#Q-:CAPS
+#: ../share/extensions/restack.inx.h:17
+#, fuzzy
+msgid "restack|Left"
+msgstr "টেক্সট (_ট)"
+
+#: ../share/extensions/restack.inx.h:18
+#, fuzzy
+msgid "restack|Middle"
+msgstr "ফাইল (_ফ)"
+
+#: ../share/extensions/restack.inx.h:19
+#, fuzzy
+msgid "restack|Right"
+msgstr "টেক্সট (_ট)"
+
+#: ../share/extensions/restack.inx.h:20
+#, fuzzy
+msgid "restack|Top"
+msgstr "টেক্সট (_ট)"
+
#: ../share/extensions/rtree.inx.h:1
msgid "Initial size"
msgstr ""
#: ../share/extensions/web-set-att.inx.h:4
msgid ""
-"If you want to set more then one attribute, you must separate this with a "
+"If you want to set more than one attribute, you must separate this with a "
"space, and only with a space."
msgstr ""
msgstr ""
#: ../share/extensions/web-set-att.inx.h:10
-msgid "The first selected set an attribute in all others"
+msgid "The first selected sets an attribute in all others"
msgstr ""
#: ../share/extensions/web-set-att.inx.h:11
-msgid "The list of values must have the same size of the attributes list."
+msgid "The list of values must have the same size as the attributes list."
msgstr ""
#: ../share/extensions/web-set-att.inx.h:12
msgstr ""
#: ../share/extensions/web-set-att.inx.h:17
-msgid "When the set must be done?"
+msgid "When should the set be done?"
msgstr ""
#: ../share/extensions/web-set-att.inx.h:18
msgstr ""
#: ../share/extensions/web-transmit-att.inx.h:1
-msgid "All selected ones transmits to the last one"
+msgid "All selected ones transmit to the last one"
msgstr ""
#: ../share/extensions/web-transmit-att.inx.h:2
#: ../share/extensions/web-transmit-att.inx.h:12
msgid ""
"This effect transmits one or more attributes from the first selected element "
-"to the second when a event occurs."
+"to the second when an event occurs."
msgstr ""
#: ../share/extensions/web-transmit-att.inx.h:13