![[tokkee]](http://tokkee.org/images/avatar.png){kind=avatar}
index 0546761b5e2fc27006d7c321a644fe8ff0e683f6..d0167cdedd019e38c3af543bb055382f5407dd5c 100755 (executable)
# should already have it installed.
#
# $Id$
-#
+#
# Nothing clever done in this program - its a very simple bare basics hack to
# get the job done.
#
use POSIX;
use strict;
use Getopt::Long;
-use vars qw($opt_V $opt_h $opt_H $opt_t $opt_w $opt_c $opt_j $opt_k $verbose $PROGNAME $def_jitter);
-use lib utils.pm;
+use vars qw($opt_V $opt_h $opt_H $opt_t $opt_w $opt_c $opt_O $opt_j $opt_k $verbose $PROGNAME $def_jitter $ipv4 $ipv6);
+use lib utils.pm;
use utils qw($TIMEOUT %ERRORS &print_revision &support);
$PROGNAME="check_ntp";
GetOptions
("V" => \$opt_V, "version" => \$opt_V,
"h" => \$opt_h, "help" => \$opt_h,
- "v" => \$verbose, "verbose" => \$verbose,
+ "v" => \$verbose, "verbose" => \$verbose,
+ "4" => \$ipv4, "use-ipv4" => \$ipv4,
+ "6" => \$ipv6, "use-ipv6" => \$ipv6,
"w=f" => \$opt_w, "warning=f" => \$opt_w, # offset|adjust warning if above this number
"c=f" => \$opt_c, "critical=f" => \$opt_c, # offset|adjust critical if above this number
+ "O" => \$opt_O, "zero-offset" => \$opt_O, # zero-offset bad
"j=s" => \$opt_j, "jwarn=i" => \$opt_j, # jitter warning if above this number
"k=s" => \$opt_k, "jcrit=i" => \$opt_k, # jitter critical if above this number
"t=s" => \$opt_t, "timeout=i" => \$opt_t,
};
alarm($timeout);
+# Determine protocol to be used for ntpdate and ntpq
+my $ntpdate = $utils::PATH_TO_NTPDATE;
+my $ntpq = $utils::PATH_TO_NTPQ;
+if ($ipv4) {
+ $ntpdate .= " -4";
+ $ntpq .= " -4";
+}
+elsif ($ipv6) {
+ $ntpdate .= " -6";
+ $ntpq .= " -6";
+}
+# else don't use any flags
###
###
###
###
-if (!open (NTPDATE, "$utils::PATH_TO_NTPDATE -q $host 2>&1 |")) {
+if (!open (NTPDATE, $ntpdate . " -q $host 2>&1 |")) {
print "Could not open ntpdate\n";
exit $ERRORS{"UNKNOWN"};
}
while (<NTPDATE>) {
- print if ($verbose);
+ #print if ($verbose); # noop
$msg = $_ unless ($msg);
if (/stratum\s(\d+)/) {
# An offset of 0.000000 with an error is probably bogus. Actually,
# it's probably always bogus, but let's be paranoid here.
- if ($offset == 0) { undef $offset;}
+ # Has been reported that 0.0000 happens in a production environment
+ # on Solaris 8 so this check should be taken out - SF tracker 1150777
+ if (defined $opt_O ) {
+ if ($offset == 0) { undef $offset;}
+ }
$ntpdate_error = defined ($offset) ? $ERRORS{"OK"} : $ERRORS{"CRITICAL"};
print "ntperr = $ntpdate_error \n" if $verbose;
if ($have_ntpq) {
- if ( open(NTPQ,"$utils::PATH_TO_NTPQ -np $host 2>&1 |") ) {
+ if ( open(NTPQ, $ntpq . " -np $host 2>&1 |") ) {
while (<NTPQ>) {
print $_ if ($verbose);
if ( /timed out/ ){
}
# match sys.peer or pps.peer
- if (/^(\*|o)([-0-9.\s]+)\s+([-0-9A-Za-z.]+)\s+([-0-9.]+)\s+([lumb-]+)\s+([-0-9m.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)/) {
+ if (/^(\*|o)([-0-9.\s]+)\s+([-0-9A-Za-z_().]+)\s+([-0-9.]+)\s+([lumb-]+)\s+([-0-9hm.]+)\s+([-0-9.mh]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)/) {
$syspeer = $2;
$stratum = $4;
$jitter = $11;
# generate a warning
# based on bug id 773588
unless (defined $syspeer) {
- if ($#candidates >0) {
+ if ($#candidates >=0) {
foreach my $c (@candidates) {
- $c =~ /^(#)([-0-9.\s]+)\s+([-0-9A-Za-z.]+)\s+([-0-9.]+)\s+([lumb-]+)\s+([-0-9m.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)/;
+ $c =~ /^(#)([-0-9.\s]+)\s+([-0-9A-Za-z_().]+)\s+([-0-9.]+)\s+([lumb-]+)\s+([-0-9m.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)/;
$syspeer = $2;
$stratum = $4;
$jitter = $11;
} elsif( !$have_ntpq ) { # no errors from ntpdate and no ntpq or ntpq timed out
if (abs($offset) > $ocrit) {
$state = $ERRORS{'CRITICAL'};
- $answer = "Offset $offset msec > +/- $ocrit sec\n";
+ $answer = "Offset $offset sec > +/- $ocrit sec\n";
} elsif (abs($offset) > $owarn) {
$state = $ERRORS{'WARNING'};
- $answer = "Offset $offset msec > +/- $owarn sec\n";
+ $answer = "Offset $offset sec > +/- $owarn sec\n";
} elsif (( abs($offset) > $owarn) && $def_jitter ) {
$state = $ERRORS{'WARNING'};
- $answer = "Offset $offset msec > +/- $owarn sec, ntpq timed out\n";
+ $answer = "Offset $offset sec > +/- $owarn sec, ntpq timed out\n";
} elsif ( $def_jitter ) {
$state = $ERRORS{'WARNING'};
$answer = "Offset $offset secs, ntpq timed out\n";
} else { # no errors from ntpdate or ntpq
if (abs($offset) > $ocrit) {
$state = $ERRORS{'CRITICAL'};
- $answer = "Offset $offset msec > +/- $ocrit sec, jitter $jitter msec\n";
+ $answer = "Offset $offset sec > +/- $ocrit sec, jitter $jitter msec\n";
} elsif (abs($jitter) > $jcrit ) {
$state = $ERRORS{'CRITICAL'};
$answer = "Jitter $jitter msec> +/- $jcrit msec, offset $offset sec \n";
} elsif (abs($offset) > $owarn) {
$state = $ERRORS{'WARNING'};
- $answer = "Offset $offset msec > +/- $owarn sec, jitter $jitter msec\n";
+ $answer = "Offset $offset sec > +/- $owarn sec, jitter $jitter msec\n";
} elsif (abs($jitter) > $jwarn ) {
$state = $ERRORS{'WARNING'};
$answer = "Jitter $jitter msec> +/- $jwarn msec, offset $offset sec \n";
#### subs
sub print_usage () {
- print "Usage: $PROGNAME -H <host> [-w <warn>] [-c <crit>] [-j <warn>] [-k <crit>] [-v verbose]\n";
+ print "Usage: $PROGNAME -H <host> [-46] [-O] [-w <warn>] [-c <crit>] [-j <warn>] [-k <crit>] [-v verbose]\n";
}
sub print_help () {
print "
Checks the local timestamp offset versus <host> with ntpdate
Checks the jitter/dispersion of clock signal between <host> and its sys.peer with ntpq\n
--w ( --warning)
+-O (--zero-offset)
+ A zero offset on \"ntpdate\" will generate a CRITICAL.\n
+-w (--warning)
Clock offset in seconds at which a warning message will be generated.\n Defaults to $DEFAULT_OFFSET_WARN.
-c (--critical)
Clock offset in seconds at which a critical message will be generated.\n Defaults to $DEFAULT_OFFSET_CRIT.
-j (--jwarn)
Clock jitter in milliseconds at which a warning message will be generated.\n Defaults to $DEFAULT_JITTER_WARN.
-k (--jcrit)
- Clock jitter in milliseconds at which a warning message will be generated.\n Defaults to $DEFAULT_JITTER_CRIT.\n
+ Clock jitter in milliseconds at which a critical message will be generated.\n Defaults to $DEFAULT_JITTER_CRIT.
If jitter/dispersion is specified with -j or -k and ntpq times out, then a
- warning is returned.
-";
+ warning is returned.\n
+-4 (--use-ipv4)
+ Use IPv4 connection
+-6 (--use-ipv6)
+ Use IPv6 connection
+\n";
support();
}