index f8648345c54151ae6a8bc061862442663e7e9a87..5c87e0a66e66ba003b9d3b6597c0d0fd086a9993 100755 (executable)
-#! /usr/bin/perl -w
-
+#!/usr/bin/perl -w
+#
# (c)1999 Ian Cass, Knowledge Matters Ltd.
# Read the GNU copyright stuff for all the legalese
#
# (c)1999 Ian Cass, Knowledge Matters Ltd.
# Read the GNU copyright stuff for all the legalese
#
# be installed on the system, however since it's part of the ntp suite, you
# should already have it installed.
#
# be installed on the system, however since it's part of the ntp suite, you
# should already have it installed.
#
-# $Id$
-#
+#
# Nothing clever done in this program - its a very simple bare basics hack to
# get the job done.
#
# Nothing clever done in this program - its a very simple bare basics hack to
# get the job done.
#
# Modifed to run under Embedded Perl (sghosh@users.sf.net)
# - combined logic some blocks together..
#
# Modifed to run under Embedded Perl (sghosh@users.sf.net)
# - combined logic some blocks together..
#
-# Todo - non-hardcoded dispersion values...
+# Added ntpdate check for stratum 16 desynch peer (James Fidell) Feb 03, 2003
#
#
-
+# ntpdate - offset is in seconds
+# changed ntpdc to ntpq - jitter/dispersion is in milliseconds
+#
+# Patch for for regex for stratum1 refid.
require 5.004;
use POSIX;
use strict;
use Getopt::Long;
require 5.004;
use POSIX;
use strict;
use Getopt::Long;
-use vars qw($opt_V $opt_h $opt_H $opt_w $opt_c $verbose $PROGNAME);
-use lib utils.pm ;
+use vars qw($opt_V $opt_h $opt_H $opt_t $opt_w $opt_c $opt_O $opt_j $opt_k $verbose $PROGNAME $def_jitter $ipv4 $ipv6);
+use lib utils.pm;
use utils qw($TIMEOUT %ERRORS &print_revision &support);
$PROGNAME="check_ntp";
use utils qw($TIMEOUT %ERRORS &print_revision &support);
$PROGNAME="check_ntp";
$ENV{'BASH_ENV'}='';
$ENV{'ENV'}='';
$ENV{'BASH_ENV'}='';
$ENV{'ENV'}='';
+# defaults in sec
+my $DEFAULT_OFFSET_WARN = 60; # 1 minute
+my $DEFAULT_OFFSET_CRIT = 120; # 2 minutes
+# default in millisec
+my $DEFAULT_JITTER_WARN = 5000; # 5 sec
+my $DEFAULT_JITTER_CRIT = 10000; # 10 sec
+
Getopt::Long::Configure('bundling');
GetOptions
("V" => \$opt_V, "version" => \$opt_V,
"h" => \$opt_h, "help" => \$opt_h,
Getopt::Long::Configure('bundling');
GetOptions
("V" => \$opt_V, "version" => \$opt_V,
"h" => \$opt_h, "help" => \$opt_h,
- "v" => \$verbose, "verbose" => \$verbose,
- "w=s" => \$opt_w, "warning=s" => \$opt_w, # offset|adjust warning if above this number
- "c=s" => \$opt_c, "critical=s" => \$opt_c, # offset|adjust critical if above this number
+ "v" => \$verbose, "verbose" => \$verbose,
+ "4" => \$ipv4, "use-ipv4" => \$ipv4,
+ "6" => \$ipv6, "use-ipv6" => \$ipv6,
+ "w=f" => \$opt_w, "warning=f" => \$opt_w, # offset|adjust warning if above this number
+ "c=f" => \$opt_c, "critical=f" => \$opt_c, # offset|adjust critical if above this number
+ "O" => \$opt_O, "zero-offset" => \$opt_O, # zero-offset bad
+ "j=s" => \$opt_j, "jwarn=i" => \$opt_j, # jitter warning if above this number
+ "k=s" => \$opt_k, "jcrit=i" => \$opt_k, # jitter critical if above this number
+ "t=s" => \$opt_t, "timeout=i" => \$opt_t,
"H=s" => \$opt_H, "hostname=s" => \$opt_H);
if ($opt_V) {
"H=s" => \$opt_H, "hostname=s" => \$opt_H);
if ($opt_V) {
- print_revision($PROGNAME,'$Revision$ ');
+ print_revision($PROGNAME,'@NP_VERSION@');
exit $ERRORS{'OK'};
}
exit $ERRORS{'OK'};
}
exit $ERRORS{'OK'};
}
exit $ERRORS{'OK'};
}
+# jitter test params specified
+if (defined $opt_j || defined $opt_k ) {
+ $def_jitter = 1;
+}
+
$opt_H = shift unless ($opt_H);
my $host = $1 if ($opt_H && $opt_H =~ m/^([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+|[a-zA-Z][-a-zA-Z0-9]+(\.[a-zA-Z][-a-zA-Z0-9]+)*)$/);
unless ($host) {
$opt_H = shift unless ($opt_H);
my $host = $1 if ($opt_H && $opt_H =~ m/^([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+|[a-zA-Z][-a-zA-Z0-9]+(\.[a-zA-Z][-a-zA-Z0-9]+)*)$/);
unless ($host) {
exit $ERRORS{'UNKNOWN'};
}
exit $ERRORS{'UNKNOWN'};
}
-($opt_w) || ($opt_w = shift) || ($opt_w = 60);
-my $warning = $1 if ($opt_w =~ /([0-9]+)/);
+my ($timeout, $owarn, $ocrit, $jwarn, $jcrit);
+
+$timeout = $TIMEOUT;
+($opt_t) && ($opt_t =~ /^([0-9]+)$/) && ($timeout = $1);
+
+$owarn = $DEFAULT_OFFSET_WARN;
+($opt_w) && ($opt_w =~ /^([0-9.]+)$/) && ($owarn = $1);
+
+$ocrit = $DEFAULT_OFFSET_CRIT;
+($opt_c) && ($opt_c =~ /^([0-9.]+)$/) && ($ocrit = $1);
+
+$jwarn = $DEFAULT_JITTER_WARN;
+($opt_j) && ($opt_j =~ /^([0-9]+)$/) && ($jwarn = $1);
-($opt_c) || ($opt_c = shift) || ($opt_c = 120);
-my $critical = $1 if ($opt_c =~ /([0-9]+)/);
+$jcrit = $DEFAULT_JITTER_CRIT;
+($opt_k) && ($opt_k =~ /^([0-9]+)$/) && ($jcrit = $1);
-if ($opt_c < $opt_w) {
+if ($ocrit < $owarn ) {
print "Critical offset should be larger than warning offset\n";
print_usage();
exit $ERRORS{"UNKNOWN"};
}
print "Critical offset should be larger than warning offset\n";
print_usage();
exit $ERRORS{"UNKNOWN"};
}
+if ($def_jitter) {
+ if ($opt_k < $opt_j) {
+ print "Critical jitter should be larger than warning jitter\n";
+ print_usage();
+ exit $ERRORS{'UNKNOWN'};
+ }
+}
+
+
+my $stratum = -1;
+my $ignoreret = 0;
my $answer = undef;
my $offset = undef;
my $answer = undef;
my $offset = undef;
+my $jitter = undef;
+my $syspeer = undef;
+my $candidate = 0;
+my @candidates;
my $msg; # first line of output to print if format is invalid
my $state = $ERRORS{'UNKNOWN'};
my $ntpdate_error = $ERRORS{'UNKNOWN'};
my $msg; # first line of output to print if format is invalid
my $state = $ERRORS{'UNKNOWN'};
my $ntpdate_error = $ERRORS{'UNKNOWN'};
-my $dispersion_error = $ERRORS{'UNKNOWN'};
-
-my $key = undef;
+my $jitter_error = $ERRORS{'UNKNOWN'};
+
+# some systems don't have a proper ntpq (migrated from ntpdc)
+my $have_ntpq = undef;
+if ($utils::PATH_TO_NTPQ && -x $utils::PATH_TO_NTPQ ) {
+ $have_ntpq = 1;
+}else{
+ $have_ntpq = 0;
+}
# Just in case of problems, let's not hang Nagios
$SIG{'ALRM'} = sub {
print ("ERROR: No response from ntp server (alarm)\n");
exit $ERRORS{"UNKNOWN"};
};
# Just in case of problems, let's not hang Nagios
$SIG{'ALRM'} = sub {
print ("ERROR: No response from ntp server (alarm)\n");
exit $ERRORS{"UNKNOWN"};
};
-alarm($TIMEOUT);
-
+alarm($timeout);
+
+# Determine protocol to be used for ntpdate and ntpq
+my $ntpdate = $utils::PATH_TO_NTPDATE;
+my $ntpq = $utils::PATH_TO_NTPQ;
+if ($ipv4) {
+ $ntpdate .= " -4";
+ $ntpq .= " -4";
+}
+elsif ($ipv6) {
+ $ntpdate .= " -6";
+ $ntpq .= " -6";
+}
+# else don't use any flags
###
###
-###$dispersion_error = $ERRORS{'
+###
### First, check ntpdate
###
###
### First, check ntpdate
###
###
-if (!open (NTPDATE, "$utils::PATH_TO_NTPDATE -q $host 2>&1 |")) {
- print "Could not open ntpdate\n";
+if (!open (NTPDATE, $ntpdate . " -q $host 2>&1 |")) {
+ print "Could not open $ntpdate: $!\n";
exit $ERRORS{"UNKNOWN"};
}
exit $ERRORS{"UNKNOWN"};
}
+my $out;
while (<NTPDATE>) {
while (<NTPDATE>) {
- print if ($verbose);
+ #print if ($verbose); # noop
$msg = $_ unless ($msg);
$msg = $_ unless ($msg);
+ $out .= "$_ ";
+
+ if (/stratum\s(\d+)/) {
+ $stratum = $1;
+ }
+
if (/(offset|adjust)\s+([-.\d]+)/i) {
$offset = $2;
# An offset of 0.000000 with an error is probably bogus. Actually,
# it's probably always bogus, but let's be paranoid here.
if (/(offset|adjust)\s+([-.\d]+)/i) {
$offset = $2;
# An offset of 0.000000 with an error is probably bogus. Actually,
# it's probably always bogus, but let's be paranoid here.
- if ($offset == 0) { undef $offset;}
+ # Has been reported that 0.0000 happens in a production environment
+ # on Solaris 8 so this check should be taken out - SF tracker 1150777
+ if (defined $opt_O ) {
+ if ($offset == 0) { undef $offset;}
+ }
$ntpdate_error = defined ($offset) ? $ERRORS{"OK"} : $ERRORS{"CRITICAL"};
print "ntperr = $ntpdate_error \n" if $verbose;
$ntpdate_error = defined ($offset) ? $ERRORS{"OK"} : $ERRORS{"CRITICAL"};
print "ntperr = $ntpdate_error \n" if $verbose;
}
if (/no server suitable for synchronization found/) {
}
if (/no server suitable for synchronization found/) {
- $ntpdate_error = $ERRORS{"CRITICAL"};
- $msg = "No suitable peer server found - ";
+ if ($stratum == 16) {
+ $ntpdate_error = $ERRORS{"WARNING"};
+ $msg = "Desynchronized peer server found";
+ $ignoreret=1;
+ }
+ else {
+ $ntpdate_error = $ERRORS{"CRITICAL"};
+ $msg = "No suitable peer server found - ";
+ }
}
}
}
}
+$out =~ s/\n//g;
+close (NTPDATE) ||
+ die $! ? "$out - Error closing $ntpdate pipe: $!"
+ : "$out - Exit status: $? from $ntpdate\n";
-close (NTPDATE);
# declare an error if we also get a non-zero return code from ntpdate
# unless already set to critical
# declare an error if we also get a non-zero return code from ntpdate
# unless already set to critical
-if ( $? ) {
+if ( $? && !$ignoreret ) {
print "stderr = $? : $! \n" if $verbose;
$ntpdate_error = $ntpdate_error == $ERRORS{"CRITICAL"} ? $ERRORS{"CRITICAL"} : $ERRORS{"UNKNOWN"} ;
print "ntperr = $ntpdate_error : $!\n" if $verbose;
print "stderr = $? : $! \n" if $verbose;
$ntpdate_error = $ntpdate_error == $ERRORS{"CRITICAL"} ? $ERRORS{"CRITICAL"} : $ERRORS{"UNKNOWN"} ;
print "ntperr = $ntpdate_error : $!\n" if $verbose;
###
###
###
###
-### Then scan xntpdc/ntpdc if it exists
-### and look in the 8th column for dispersion (ntpd v4) or jitter (ntpd v3)
+### Then scan xntpq/ntpq if it exists
+### and look in the 11th column for jitter
###
###
-
-if ( open(NTPDC,"$utils::PATH_TO_NTPDC -s $host 2>&1 |") ) {
- while (<NTPDC>) {
- print $_ if ($verbose);
- if (/([^\s]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)/) {
- if ($8>15) {
- print "Dispersion = $8 \n" if ($verbose);
- $dispersion_error = $ERRORS{'CRITICAL'};
- } elsif ($8>5 && $dispersion_error<$ERRORS{'CRITICAL'}) {
- print "Dispersion = $8 \n" if ($verbose);
- $dispersion_error = $ERRORS{'WARNING'};
+# Field 1: Tally Code ( Space, 'x','.','-','+','#','*','o')
+# Only match for '*' which implies sys.peer
+# or 'o' which implies pps.peer
+# If both exist, the last one is picked.
+# Field 2: address of the remote peer
+# Field 3: Refid of the clock (0.0.0.0 if unknown, WWWV/PPS/GPS/ACTS/USNO/PCS/... if Stratum1)
+# Field 4: stratum (0-15)
+# Field 5: Type of the peer: local (l), unicast (u), multicast (m)
+# broadcast (b); not sure about multicast/broadcast
+# Field 6: last packet receive (in seconds)
+# Field 7: polling interval
+# Field 8: reachability resgister (octal)
+# Field 9: delay
+# Field 10: offset
+# Field 11: dispersion/jitter
+#
+# According to bug 773588 Some solaris xntpd implementations seemto match on
+# "#" even though the docs say it exceeds maximum distance. Providing patch
+# here which will generate a warining.
+
+if ($have_ntpq) {
+
+ if ( open(NTPQ, $ntpq . " -np $host 2>&1 |") ) {
+ while (<NTPQ>) {
+ print $_ if ($verbose);
+ if ( /timed out/ ){
+ $have_ntpq = 0 ;
+ last ;
+ }
+ # number of candidates on <host> for sys.peer
+ if (/^(\*|\+|\#|o])/) {
+ ++$candidate;
+ push (@candidates, $_);
+ print "Candidate count= $candidate\n" if ($verbose);
+ }
+
+ # match sys.peer or pps.peer
+ if (/^(\*|o)(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)/) {
+ $syspeer = $2;
+ $stratum = $4;
+ $jitter = $11;
+ print "match $_ \n" if $verbose;
+ if ($jitter > $jcrit) {
+ print "Jitter_crit = $11 :$jcrit\n" if ($verbose);
+ $jitter_error = $ERRORS{'CRITICAL'};
+ } elsif ($jitter > $jwarn ) {
+ print "Jitter_warn = $11 :$jwarn\n" if ($verbose);
+ $jitter_error = $ERRORS{'WARNING'};
+ } else {
+ $jitter_error = $ERRORS{'OK'};
+ }
} else {
} else {
- $dispersion_error = $ERRORS{'OK'};
+ print "No match!\n" if $verbose;
+ $jitter = '(not parsed)';
+ }
+
+ }
+ close NTPQ ||
+ die $! ? "Error closing $ntpq pipe: $!"
+ : "Exit status: $? from $ntpq\n";
+
+ # if we did not match sys.peer or pps.peer but matched # candidates only
+ # generate a warning
+ # based on bug id 773588
+ unless (defined $syspeer) {
+ if ($#candidates >=0) {
+ foreach my $c (@candidates) {
+ $c =~ /^(#)([-0-9.\s]+)\s+([-0-9A-Za-z_().]+)\s+([-0-9.]+)\s+([lumb-]+)\s+([-0-9m.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)/;
+ $syspeer = $2;
+ $stratum = $4;
+ $jitter = $11;
+ print "candidate match $c \n" if $verbose;
+ if ($jitter > $jcrit) {
+ print "Candidate match - Jitter_crit = $11 :$jcrit\n" if ($verbose);
+ $jitter_error = $ERRORS{'CRITICAL'};
+ }elsif ($jitter > $jwarn ) {
+ print "Candidate match - Jitter_warn = $11 :$jwarn \n" if ($verbose);
+ $jitter_error = $ERRORS{'WARNING'};
+ } else {
+ $jitter_error = $ERRORS{'WARNING'};
+ }
+ }
+
}
}
}
}
}
}
- close NTPDC;
}
if ($ntpdate_error != $ERRORS{'OK'}) {
$state = $ntpdate_error;
}
if ($ntpdate_error != $ERRORS{'OK'}) {
$state = $ntpdate_error;
- $answer = $msg . "Server for ntp probably down\n";
- if (defined($offset) && abs($offset) > $critical) {
+ if ($ntpdate_error == $ERRORS{'WARNING'} ) {
+ $answer = $msg;
+ }
+ else {
+ $answer = $msg . "Server for ntp probably down";
+ }
+
+ if (defined($offset) && abs($offset) > $ocrit) {
$state = $ERRORS{'CRITICAL'};
$state = $ERRORS{'CRITICAL'};
- $answer = "Server Error and time difference $offset seconds greater than +/- $critical sec\n";
- } elsif (defined($offset) && abs($offset) > $warning) {
- $answer = "Server error and time difference $offset seconds greater than +/- $warning sec\n";
+ $answer = "Server Error and offset $offset sec > +/- $ocrit sec";
+ } elsif (defined($offset) && abs($offset) > $owarn) {
+ $answer = "Server error and offset $offset sec > +/- $owarn sec";
+ } elsif (defined($jitter) && abs($jitter) > $jcrit) {
+ $answer = "Server error and jitter $jitter msec > +/- $jcrit msec";
+ } elsif (defined($jitter) && abs($jitter) > $jwarn) {
+ $answer = "Server error and jitter $jitter msec > +/- $jwarn msec";
}
}
-} elsif ($dispersion_error != $ERRORS{'OK'}) {
- $state = $dispersion_error;
- $answer = "Dispersion too high\n";
- if (defined($offset) && abs($offset) > $critical) {
+} elsif ($have_ntpq && $jitter_error != $ERRORS{'OK'}) {
+ $state = $jitter_error;
+ $answer = "Jitter $jitter too high";
+ if (defined($offset) && abs($offset) > $ocrit) {
$state = $ERRORS{'CRITICAL'};
$state = $ERRORS{'CRITICAL'};
- $answer = "Dispersion error and time difference $offset seconds greater than +/- $critical sec\n";
- } elsif (defined($offset) && abs($offset) > $warning) {
- $answer = "Dispersion error and time difference $offset seconds greater than +/- $warning sec\n";
+ $answer = "Jitter error and offset $offset sec > +/- $ocrit sec";
+ } elsif (defined($offset) && abs($offset) > $owarn) {
+ $answer = "Jitter error and offset $offset sec > +/- $owarn sec";
+ } elsif (defined($jitter) && abs($jitter) > $jcrit) {
+ $answer = "Jitter error and jitter $jitter msec > +/- $jcrit msec";
+ } elsif (defined($jitter) && abs($jitter) > $jwarn) {
+ $answer = "Jitter error and jitter $jitter msec > +/- $jwarn msec";
}
}
-} else { # no errors from ntpdate or xntpdc
- if (defined $offset) {
- if (abs($offset) > $critical) {
- $state = $ERRORS{'CRITICAL'};
- $answer = "Time difference $offset seconds greater than +/- $critical sec\n";
- } elsif (abs($offset) > $warning) {
- $state = $ERRORS{'WARNING'};
- $answer = "Time difference $offset seconds greater than +/- $warning sec\n";
- } elsif (abs($offset) <= $warning) {
- $state = $ERRORS{'OK'};
- $answer = "Time difference $offset seconds\n";
- }
- } else { # no offset defined
- $state = $ERRORS{'UNKNOWN'};
- $answer = "Invalid format returned from ntpdate ($msg)\n";
+} elsif( !$have_ntpq ) { # no errors from ntpdate and no ntpq or ntpq timed out
+ if (abs($offset) > $ocrit) {
+ $state = $ERRORS{'CRITICAL'};
+ $answer = "Offset $offset sec > +/- $ocrit sec";
+ } elsif (abs($offset) > $owarn) {
+ $state = $ERRORS{'WARNING'};
+ $answer = "Offset $offset sec > +/- $owarn sec";
+ } elsif (( abs($offset) > $owarn) && $def_jitter ) {
+ $state = $ERRORS{'WARNING'};
+ $answer = "Offset $offset sec > +/- $owarn sec, ntpq timed out";
+ } elsif ( $def_jitter ) {
+ $state = $ERRORS{'WARNING'};
+ $answer = "Offset $offset secs, ntpq timed out";
+ } else{
+ $state = $ERRORS{'OK'};
+ $answer = "Offset $offset secs";
+ }
+
+
+
+} else { # no errors from ntpdate or ntpq
+ if (abs($offset) > $ocrit) {
+ $state = $ERRORS{'CRITICAL'};
+ $answer = "Offset $offset sec > +/- $ocrit sec, jitter $jitter msec";
+ } elsif (abs($jitter) > $jcrit ) {
+ $state = $ERRORS{'CRITICAL'};
+ $answer = "Jitter $jitter msec> +/- $jcrit msec, offset $offset sec";
+ } elsif (abs($offset) > $owarn) {
+ $state = $ERRORS{'WARNING'};
+ $answer = "Offset $offset sec > +/- $owarn sec, jitter $jitter msec";
+ } elsif (abs($jitter) > $jwarn ) {
+ $state = $ERRORS{'WARNING'};
+ $answer = "Jitter $jitter msec> +/- $jwarn msec, offset $offset sec";
+
+ } else {
+ $state = $ERRORS{'OK'};
+ $answer = "Offset $offset secs, jitter $jitter msec, peer is stratum $stratum";
}
}
+
}
}
-foreach $key (keys %ERRORS) {
+foreach my $key (keys %ERRORS) {
if ($state==$ERRORS{$key}) {
if ($state==$ERRORS{$key}) {
- print ("$key: $answer");
+# print ("NTP $key: $answer");
+ print ("NTP $key: $answer|offset=$offset, jitter=" . $jitter/1000 . ",peer_stratum=$stratum\n");
last;
}
}
exit $state;
last;
}
}
exit $state;
+
+####
+#### subs
+
sub print_usage () {
sub print_usage () {
- print "Usage: $PROGNAME -H <host> [-w <warn>] [-c <crit>]\n";
+ print "Usage: $PROGNAME -H <host> [-46] [-O] [-w <warn>] [-c <crit>] [-j <warn>] [-k <crit>] [-v verbose]\n";
}
sub print_help () {
}
sub print_help () {
- print_revision($PROGNAME,'$Revision$');
- print "Copyright (c) 2000 Bo Kersey/Karl DeBisschop\n";
+ print_revision($PROGNAME,'@NP_VERSION@');
+ print "Copyright (c) 2003 Bo Kersey/Karl DeBisschop\n";
print "\n";
print_usage();
print "\n";
print_usage();
- print "\n";
- print "<warn> = Clock offset in seconds at which a warning message will be generated.\n Defaults to 60.\n";
- print "<crit> = Clock offset in seconds at which a critical message will be generated.\n Defaults to 120.\n\n";
- support();
+ print "
+Checks the local timestamp offset versus <host> with ntpdate
+Checks the jitter/dispersion of clock signal between <host> and its sys.peer with ntpq\n
+-O (--zero-offset)
+ A zero offset on \"ntpdate\" will generate a CRITICAL.\n
+-w (--warning)
+ Clock offset in seconds at which a warning message will be generated.\n Defaults to $DEFAULT_OFFSET_WARN.
+-c (--critical)
+ Clock offset in seconds at which a critical message will be generated.\n Defaults to $DEFAULT_OFFSET_CRIT.
+-j (--jwarn)
+ Clock jitter in milliseconds at which a warning message will be generated.\n Defaults to $DEFAULT_JITTER_WARN.
+-k (--jcrit)
+ Clock jitter in milliseconds at which a critical message will be generated.\n Defaults to $DEFAULT_JITTER_CRIT.
+
+ If jitter/dispersion is specified with -j or -k and ntpq times out, then a
+ warning is returned.\n
+-4 (--use-ipv4)
+ Use IPv4 connection
+-6 (--use-ipv6)
+ Use IPv6 connection
+\n";
+support();
}
}