patches: Removed compiler-warning-fixes - included upstream.

[pkg-rrdtool.git] / doc / rrdbuild.pod

diff --git a/doc/rrdbuild.pod b/doc/rrdbuild.pod
index 4e420826293c34dc0aa086164273aeb365eca9b4..24570fbf09211660d3adce93901578a2a0c33ee7 100644 (file)
--- a/doc/rrdbuild.pod
+++ b/doc/rrdbuild.pod
@@ -41,7 +41,7 @@ Where you want to install the software.
 Once you have decided. Save the two locations into environment variables.
 
  BUILD_DIR=/tmp/rrdbuild
 Once you have decided. Save the two locations into environment variables.
 
  BUILD_DIR=/tmp/rrdbuild

- INSTALL_DIR=/usr/local/rrdtool-1.3.8
+ INSTALL_DIR=/usr/local/rrdtool-1.3.2

 
 
 If your F</tmp> is mounted with the option noexec (RHEL seems todo that) you have to choose
 
 
 If your F</tmp> is mounted with the option noexec (RHEL seems todo that) you have to choose


@@ -55,9 +55,9 @@ Now make sure the BUILD_DIR exists and go there:
 Lets first assume you already have all the necessary libraries
 pre-installed. 
 
 Lets first assume you already have all the necessary libraries
 pre-installed. 
 

- wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.3.8.tar.gz
- gunzip -c rrdtool-1.3.8.tar.gz | tar xf -
- cd rrdtool-1.3.8
+ wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.3.2.tar.gz
+ gunzip -c rrdtool-1.3.2.tar.gz | tar xf -
+ cd rrdtool-1.3.2

  ./configure --prefix=$INSTALL_DIR && make && make install
 
 Ok, this was very optimistic. This try will probably have ended with
  ./configure --prefix=$INSTALL_DIR && make && make install
 
 Ok, this was very optimistic. This try will probably have ended with


@@ -176,13 +176,11 @@ the syntax again differs from system to system:
 
 if you are using the Sun Studio/Forte compiler, you may also want to set
 
 
 if you are using the Sun Studio/Forte compiler, you may also want to set
 

- export CFLAGS="-xO3 -xcode=pic13"   (SPARC)
- export CFLAGS="-xO3 -Kpic"          (x86)
-
+ CFLAGS="-xO3 -xcode=pic13"   (SPARC)
+ CFLAGS="-xO3 -Kpic"          (x86)

 
 =item Linux
 
 
 =item Linux
 

- export CFLAGS="-O3 -fPIC"

  export LDFLAGS="-Wl,--rpath -Wl,${INSTALL_DIR}/lib" 
 
 =item HPUX
  export LDFLAGS="-Wl,--rpath -Wl,${INSTALL_DIR}/lib" 
 
 =item HPUX


@@ -214,7 +212,7 @@ not available natively, here is how to compile it.
  wget http://pkgconfig.freedesktop.org/releases/pkg-config-0.23.tar.gz
  gunzip -c pkg-config-0.23.tar.gz | tar xf -
  cd pkg-config-0.23
  wget http://pkgconfig.freedesktop.org/releases/pkg-config-0.23.tar.gz
  gunzip -c pkg-config-0.23.tar.gz | tar xf -
  cd pkg-config-0.23

- ./configure --prefix=$INSTALL_DIR
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"

  $MAKE
  $MAKE install
 
  $MAKE
  $MAKE install
 


@@ -231,7 +229,7 @@ Chances are very high that you already have that on your system ...
  wget http://oss.oetiker.ch/rrdtool/pub/libs/zlib-1.2.3.tar.gz
  gunzip -c zlib-1.2.3.tar.gz | tar xf -
  cd zlib-1.2.3
  wget http://oss.oetiker.ch/rrdtool/pub/libs/zlib-1.2.3.tar.gz
  gunzip -c zlib-1.2.3.tar.gz | tar xf -
  cd zlib-1.2.3

- ./configure --prefix=$INSTALL_DIR --shared
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC" --shared

  $MAKE
  $MAKE install
 
  $MAKE
  $MAKE install
 


@@ -245,8 +243,8 @@ the end of line 4 means that line 4 and line 5 are on one line.
  cd $BUILD_DIR
  wget http://oss.oetiker.ch/rrdtool/pub/libs/libpng-1.2.18.tar.gz
  gunzip -c libpng-1.2.18.tar.gz | tar xf -
  cd $BUILD_DIR
  wget http://oss.oetiker.ch/rrdtool/pub/libs/libpng-1.2.18.tar.gz
  gunzip -c libpng-1.2.18.tar.gz | tar xf -

- cd libpng-1.2.18
- ./configure --prefix=$INSTALL_DIR
+ cd libpng-1.2.10
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR

  $MAKE
  $MAKE install
 
  $MAKE
  $MAKE install
 


@@ -271,7 +269,7 @@ add the following at the start the configure line:
  wget http://oss.oetiker.ch/rrdtool/pub/libs/libxml2-2.6.32.tar.gz
  gunzip -c libxml2-2.6.32.tar.gz | tar xf -
  cd libxml2-2.6.32
  wget http://oss.oetiker.ch/rrdtool/pub/libs/libxml2-2.6.32.tar.gz
  gunzip -c libxml2-2.6.32.tar.gz | tar xf -
  cd libxml2-2.6.32

- ./configure --prefix=$INSTALL_DIR
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"

  $MAKE
  $MAKE install
 
  $MAKE
  $MAKE install
 


@@ -286,7 +284,7 @@ config file.
  wget http://oss.oetiker.ch/rrdtool/pub/libs/fontconfig-2.4.2.tar.gz
  gunzip -c fontconfig-2.4.2.tar.gz   | tar xf -
  cd fontconfig-2.4.2
  wget http://oss.oetiker.ch/rrdtool/pub/libs/fontconfig-2.4.2.tar.gz
  gunzip -c fontconfig-2.4.2.tar.gz   | tar xf -
  cd fontconfig-2.4.2

- ./configure --prefix=$INSTALL_DIR --with-freetype-config=$INSTALL_DIR/bin/freetype-config
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC" --with-freetype-config=$INSTALL_DIR/bin/freetype-config

  $MAKE
  $MAKE install
 
  $MAKE
  $MAKE install
 


@@ -296,7 +294,7 @@ config file.
  wget http://oss.oetiker.ch/rrdtool/pub/libs/pixman-0.10.0.tar.gz
  gunzip -c pixman-0.10.0.tar.gz  | tar xf -
  cd pixman-0.10.0
  wget http://oss.oetiker.ch/rrdtool/pub/libs/pixman-0.10.0.tar.gz
  gunzip -c pixman-0.10.0.tar.gz  | tar xf -
  cd pixman-0.10.0

- ./configure --prefix=$INSTALL_DIR
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"

  $MAKE
  $MAKE install
 
  $MAKE
  $MAKE install
 


@@ -305,11 +303,12 @@ config file.
  cd $BUILD_DIR
  wget http://oss.oetiker.ch/rrdtool/pub/libs/cairo-1.6.4.tar.gz
  gunzip -c cairo-1.6.4.tar.gz   | tar xf -
  cd $BUILD_DIR
  wget http://oss.oetiker.ch/rrdtool/pub/libs/cairo-1.6.4.tar.gz
  gunzip -c cairo-1.6.4.tar.gz   | tar xf -

- cd cairo-1.6.4
+ cd cairo-1.4.10

  ./configure --prefix=$INSTALL_DIR \
     --enable-xlib=no \
     --enable-xlib-render=no \
  ./configure --prefix=$INSTALL_DIR \
     --enable-xlib=no \
     --enable-xlib-render=no \

-    --enable-win32=no
+    --enable-win32=no \
+    CFLAGS="-O3 -fPIC"

  $MAKE
  $MAKE install
 
  $MAKE
  $MAKE install
 


@@ -319,7 +318,7 @@ config file.
  wget http://oss.oetiker.ch/rrdtool/pub/libs/glib-2.15.4.tar.gz
  gunzip -c glib-2.15.4.tar.gz  | tar xf -
  cd glib-2.15.4
  wget http://oss.oetiker.ch/rrdtool/pub/libs/glib-2.15.4.tar.gz
  gunzip -c glib-2.15.4.tar.gz  | tar xf -
  cd glib-2.15.4

- ./configure --prefix=$INSTALL_DIR
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"

  $MAKE
  $MAKE install
 
  $MAKE
  $MAKE install
 


@@ -329,7 +328,7 @@ config file.
  wget http://oss.oetiker.ch/rrdtool/pub/libs/pango-1.21.1.tar.bz2
  bunzip2 -c pango-1.21.1.tar.bz2 | tar xf -
  cd pango-1.21.1
  wget http://oss.oetiker.ch/rrdtool/pub/libs/pango-1.21.1.tar.bz2
  bunzip2 -c pango-1.21.1.tar.bz2 | tar xf -
  cd pango-1.21.1

- ./configure --prefix=$INSTALL_DIR --without-x
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC" --without-x

  $MAKE
  $MAKE install
 
  $MAKE
  $MAKE install
 


@@ -345,7 +344,7 @@ because it seems that a fair number of people have ill configured python and
 tcl setups that would prevent rrdtool from building if they are included in
 their current state.
 
 tcl setups that would prevent rrdtool from building if they are included in
 their current state.
 

- cd $BUILD_DIR/rrdtool-1.3.8
+ cd $BUILD_DIR/rrdtool-1.3.2

  ./configure --prefix=$INSTALL_DIR --disable-tcl --disable-python
  $MAKE clean
  $MAKE
  ./configure --prefix=$INSTALL_DIR --disable-tcl --disable-python
  $MAKE clean
  $MAKE