bindings/Makefile.in

   1 # Makefile.in generated by automake 1.11 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17 VPATH = @srcdir@
  18 pkgdatadir = $(datadir)/@PACKAGE@
  19 pkgincludedir = $(includedir)/@PACKAGE@
  20 pkglibdir = $(libdir)/@PACKAGE@
  21 pkglibexecdir = $(libexecdir)/@PACKAGE@
  22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  23 install_sh_DATA = $(install_sh) -c -m 644
  24 install_sh_PROGRAM = $(install_sh) -c
  25 install_sh_SCRIPT = $(install_sh) -c
  26 INSTALL_HEADER = $(INSTALL_DATA)
  27 transform = $(program_transform_name)
  28 NORMAL_INSTALL = :
  29 PRE_INSTALL = :
  30 POST_INSTALL = :
  31 NORMAL_UNINSTALL = :
  32 PRE_UNINSTALL = :
  33 POST_UNINSTALL = :
  34 build_triplet = @build@
  35 host_triplet = @host@
  36 target_triplet = @target@
  37 subdir = bindings
  38 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
  39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  40 am__aclocal_m4_deps = $(top_srcdir)/m4/acinclude.m4 \
  41         $(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/gettext.m4 \
  42         $(top_srcdir)/m4/glibc2.m4 $(top_srcdir)/m4/glibc21.m4 \
  43         $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intdiv0.m4 \
  44         $(top_srcdir)/m4/intl.m4 $(top_srcdir)/m4/intlmacosx.m4 \
  45         $(top_srcdir)/m4/intmax.m4 $(top_srcdir)/m4/inttypes-pri.m4 \
  46         $(top_srcdir)/m4/inttypes_h.m4 $(top_srcdir)/m4/lcmessage.m4 \
  47         $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
  48         $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
  49         $(top_srcdir)/m4/lock.m4 $(top_srcdir)/m4/longlong.m4 \
  50         $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
  51         $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
  52         $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
  53         $(top_srcdir)/m4/printf-posix.m4 $(top_srcdir)/m4/progtest.m4 \
  54         $(top_srcdir)/m4/size_max.m4 $(top_srcdir)/m4/stdint_h.m4 \
  55         $(top_srcdir)/m4/uintmax_t.m4 $(top_srcdir)/m4/visibility.m4 \
  56         $(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wint_t.m4 \
  57         $(top_srcdir)/m4/xsize.m4 $(top_srcdir)/configure.ac
  58 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  59         $(ACLOCAL_M4)
  60 mkinstalldirs = $(install_sh) -d
  61 CONFIG_HEADER = $(top_builddir)/rrd_config.h
  62 CONFIG_CLEAN_FILES =
  63 CONFIG_CLEAN_VPATH_FILES =
  64 AM_V_GEN = $(am__v_GEN_$(V))
  65 am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
  66 am__v_GEN_0 = @echo "  GEN   " $@;
  67 AM_V_at = $(am__v_at_$(V))
  68 am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
  69 am__v_at_0 = @
  70 SOURCES =
  71 DIST_SOURCES =
  72 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
  73         html-recursive info-recursive install-data-recursive \
  74         install-dvi-recursive install-exec-recursive \
  75         install-html-recursive install-info-recursive \
  76         install-pdf-recursive install-ps-recursive install-recursive \
  77         installcheck-recursive installdirs-recursive pdf-recursive \
  78         ps-recursive uninstall-recursive
  79 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
  80   distclean-recursive maintainer-clean-recursive
  81 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
  82         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
  83         distdir
  84 ETAGS = etags
  85 CTAGS = ctags
  86 DIST_SUBDIRS = tcl lua
  87 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  88 am__relativize = \
  89   dir0=`pwd`; \
  90   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  91   sed_rest='s,^[^/]*/*,,'; \
  92   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  93   sed_butlast='s,/*[^/]*$$,,'; \
  94   while test -n "$$dir1"; do \
  95     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
  96     if test "$$first" != "."; then \
  97       if test "$$first" = ".."; then \
  98         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
  99         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 100       else \
 101         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 102         if test "$$first2" = "$$first"; then \
 103           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 104         else \
 105           dir2="../$$dir2"; \
 106         fi; \
 107         dir0="$$dir0"/"$$first"; \
 108       fi; \
 109     fi; \
 110     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 111   done; \
 112   reldir="$$dir2"
 113 ACLOCAL = @ACLOCAL@
 114 ALLOCA = @ALLOCA@
 115 ALL_LIBS = @ALL_LIBS@
 116 AMTAR = @AMTAR@
 117 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 118 AR = @AR@
 119 AUTOCONF = @AUTOCONF@
 120 AUTOHEADER = @AUTOHEADER@
 121 AUTOMAKE = @AUTOMAKE@
 122 AWK = @AWK@
 123 BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
 124 CATOBJEXT = @CATOBJEXT@
 125 CC = @CC@
 126 CCDEPMODE = @CCDEPMODE@
 127 CFLAGS = @CFLAGS@
 128 CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
 129 COMP_LUA = @COMP_LUA@
 130 COMP_PERL = @COMP_PERL@
 131 COMP_PYTHON = @COMP_PYTHON@
 132 COMP_RUBY = @COMP_RUBY@
 133 CORE_LIBS = @CORE_LIBS@
 134 CPP = @CPP@
 135 CPPFLAGS = @CPPFLAGS@
 136 CYGPATH_W = @CYGPATH_W@
 137 DATADIRNAME = @DATADIRNAME@
 138 DEFS = @DEFS@
 139 DEPDIR = @DEPDIR@
 140 DSYMUTIL = @DSYMUTIL@
 141 DUMPBIN = @DUMPBIN@
 142 ECHO_C = @ECHO_C@
 143 ECHO_N = @ECHO_N@
 144 ECHO_T = @ECHO_T@
 145 EGREP = @EGREP@
 146 EXEEXT = @EXEEXT@
 147 FGREP = @FGREP@
 148 GENCAT = @GENCAT@
 149 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 150 GLIBC2 = @GLIBC2@
 151 GLIBC21 = @GLIBC21@
 152 GMSGFMT = @GMSGFMT@
 153 GMSGFMT_015 = @GMSGFMT_015@
 154 GREP = @GREP@
 155 HAVE_ASPRINTF = @HAVE_ASPRINTF@
 156 HAVE_POSIX_PRINTF = @HAVE_POSIX_PRINTF@
 157 HAVE_SNPRINTF = @HAVE_SNPRINTF@
 158 HAVE_VISIBILITY = @HAVE_VISIBILITY@
 159 HAVE_WPRINTF = @HAVE_WPRINTF@
 160 INSTALL = @INSTALL@
 161 INSTALL_DATA = @INSTALL_DATA@
 162 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 163 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 164 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 165 INSTOBJEXT = @INSTOBJEXT@
 166 INTLBISON = @INTLBISON@
 167 INTLLIBS = @INTLLIBS@
 168 INTLOBJS = @INTLOBJS@
 169 INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
 170 INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
 171 LD = @LD@
 172 LDFLAGS = @LDFLAGS@
 173 LIBICONV = @LIBICONV@
 174 LIBINTL = @LIBINTL@
 175 LIBMULTITHREAD = @LIBMULTITHREAD@
 176 LIBOBJS = @LIBOBJS@
 177 LIBPTH = @LIBPTH@
 178 LIBPTH_PREFIX = @LIBPTH_PREFIX@
 179 LIBS = @LIBS@
 180 LIBTHREAD = @LIBTHREAD@
 181 LIBTOOL = @LIBTOOL@
 182 LIBVERS = @LIBVERS@
 183 LIPO = @LIPO@
 184 LN_S = @LN_S@
 185 LTLIBC = @LTLIBC@
 186 LTLIBICONV = @LTLIBICONV@
 187 LTLIBINTL = @LTLIBINTL@
 188 LTLIBMULTITHREAD = @LTLIBMULTITHREAD@
 189 LTLIBOBJS = @LTLIBOBJS@
 190 LTLIBPTH = @LTLIBPTH@
 191 LTLIBTHREAD = @LTLIBTHREAD@
 192 LUA = @LUA@
 193 LUA_CFLAGS = @LUA_CFLAGS@
 194 LUA_DEFINES = @LUA_DEFINES@
 195 LUA_INSTALL_CMOD = @LUA_INSTALL_CMOD@
 196 LUA_INSTALL_LMOD = @LUA_INSTALL_LMOD@
 197 LUA_LFLAGS = @LUA_LFLAGS@
 198 MAINT = @MAINT@
 199 MAKEINFO = @MAKEINFO@
 200 MKDIR_P = @MKDIR_P@
 201 MSGFMT = @MSGFMT@
 202 MSGFMT_015 = @MSGFMT_015@
 203 MSGMERGE = @MSGMERGE@
 204 MULTITHREAD_CFLAGS = @MULTITHREAD_CFLAGS@
 205 MULTITHREAD_LDFLAGS = @MULTITHREAD_LDFLAGS@
 206 NM = @NM@
 207 NMEDIT = @NMEDIT@
 208 NROFF = @NROFF@
 209 NUMVERS = @NUMVERS@
 210 OBJDUMP = @OBJDUMP@
 211 OBJEXT = @OBJEXT@
 212 OTOOL = @OTOOL@
 213 OTOOL64 = @OTOOL64@
 214 PACKAGE = @PACKAGE@
 215 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 216 PACKAGE_NAME = @PACKAGE_NAME@
 217 PACKAGE_STRING = @PACKAGE_STRING@
 218 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 219 PACKAGE_VERSION = @PACKAGE_VERSION@
 220 PATH_SEPARATOR = @PATH_SEPARATOR@
 221 PERL = @PERL@
 222 PERLCC = @PERLCC@
 223 PERLCCFLAGS = @PERLCCFLAGS@
 224 PERLFLAGS = @PERLFLAGS@
 225 PERLLD = @PERLLD@
 226 PERLLDFLAGS = @PERLLDFLAGS@
 227 PERL_CC = @PERL_CC@
 228 PERL_MAKE_OPTIONS = @PERL_MAKE_OPTIONS@
 229 PERL_VERSION = @PERL_VERSION@
 230 PKGCONFIG = @PKGCONFIG@
 231 POD2HTML = @POD2HTML@
 232 POD2MAN = @POD2MAN@
 233 POSUB = @POSUB@
 234 PRI_MACROS_BROKEN = @PRI_MACROS_BROKEN@
 235 PTHREAD_CC = @PTHREAD_CC@
 236 PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
 237 PTHREAD_LIBS = @PTHREAD_LIBS@
 238 PYTHON = @PYTHON@
 239 PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
 240 PYTHON_INCLUDES = @PYTHON_INCLUDES@
 241 PYTHON_PLATFORM = @PYTHON_PLATFORM@
 242 PYTHON_PREFIX = @PYTHON_PREFIX@
 243 PYTHON_VERSION = @PYTHON_VERSION@
 244 RANLIB = @RANLIB@
 245 RRDDOCDIR = @RRDDOCDIR@
 246 RRDGRAPH_YLEGEND_ANGLE = @RRDGRAPH_YLEGEND_ANGLE@
 247 RRD_DEFAULT_FONT = @RRD_DEFAULT_FONT@
 248 RRD_GETOPT_LONG = @RRD_GETOPT_LONG@
 249 RUBY = @RUBY@
 250 RUBY_MAKE_OPTIONS = @RUBY_MAKE_OPTIONS@
 251 SED = @SED@
 252 SET_MAKE = @SET_MAKE@
 253 SHELL = @SHELL@
 254 STRIP = @STRIP@
 255 TCL_INCLUDE_SPEC = @TCL_INCLUDE_SPEC@
 256 TCL_LD_SEARCH_FLAGS = @TCL_LD_SEARCH_FLAGS@
 257 TCL_PACKAGE_DIR = @TCL_PACKAGE_DIR@
 258 TCL_PACKAGE_PATH = @TCL_PACKAGE_PATH@
 259 TCL_PREFIX = @TCL_PREFIX@
 260 TCL_SHLIB_CFLAGS = @TCL_SHLIB_CFLAGS@
 261 TCL_SHLIB_LD = @TCL_SHLIB_LD@
 262 TCL_SHLIB_SUFFIX = @TCL_SHLIB_SUFFIX@
 263 TCL_STUB_LIB_SPEC = @TCL_STUB_LIB_SPEC@
 264 TCL_VERSION = @TCL_VERSION@
 265 TROFF = @TROFF@
 266 USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
 267 USE_NLS = @USE_NLS@
 268 VERSION = @VERSION@
 269 WERROR = @WERROR@
 270 WINDRES = @WINDRES@
 271 WOE32 = @WOE32@
 272 WOE32DLL = @WOE32DLL@
 273 XGETTEXT = @XGETTEXT@
 274 XGETTEXT_015 = @XGETTEXT_015@
 275 XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
 276 abs_builddir = @abs_builddir@
 277 abs_srcdir = @abs_srcdir@
 278 abs_top_builddir = @abs_top_builddir@
 279 abs_top_srcdir = @abs_top_srcdir@
 280 ac_ct_CC = @ac_ct_CC@
 281 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 282 acx_pthread_config = @acx_pthread_config@
 283 am__include = @am__include@
 284 am__leading_dot = @am__leading_dot@
 285 am__quote = @am__quote@
 286 am__tar = @am__tar@
 287 am__untar = @am__untar@
 288 bindir = @bindir@
 289 build = @build@
 290 build_alias = @build_alias@
 291 build_cpu = @build_cpu@
 292 build_os = @build_os@
 293 build_vendor = @build_vendor@
 294 builddir = @builddir@
 295 datadir = @datadir@
 296 datarootdir = @datarootdir@
 297 docdir = @docdir@
 298 dvidir = @dvidir@
 299 exec_prefix = @exec_prefix@
 300 host = @host@
 301 host_alias = @host_alias@
 302 host_cpu = @host_cpu@
 303 host_os = @host_os@
 304 host_vendor = @host_vendor@
 305 htmldir = @htmldir@
 306 includedir = @includedir@
 307 infodir = @infodir@
 308 install_sh = @install_sh@
 309 libdir = @libdir@
 310 libexecdir = @libexecdir@
 311 localedir = @localedir@
 312 localstatedir = @localstatedir@
 313 lt_ECHO = @lt_ECHO@
 314 mandir = @mandir@
 315 mkdir_p = @mkdir_p@
 316 oldincludedir = @oldincludedir@
 317 pdfdir = @pdfdir@
 318 pkgpyexecdir = @pkgpyexecdir@
 319 pkgpythondir = @pkgpythondir@
 320 prefix = @prefix@
 321 program_transform_name = @program_transform_name@
 322 psdir = @psdir@
 323 pyexecdir = @pyexecdir@
 324 pythondir = @pythondir@
 325 sbindir = @sbindir@
 326 sharedstatedir = @sharedstatedir@
 327 srcdir = @srcdir@
 328 sysconfdir = @sysconfdir@
 329 target = @target@
 330 target_alias = @target_alias@
 331 target_cpu = @target_cpu@
 332 target_os = @target_os@
 333 target_vendor = @target_vendor@
 334 top_build_prefix = @top_build_prefix@
 335 top_builddir = @top_builddir@
 336 top_srcdir = @top_srcdir@
 337 @BUILD_TCL_TRUE@SUB_tcl = tcl
 338 @BUILD_LUA_TRUE@SUB_lua = lua
 339 SUBDIRS = $(SUB_tcl) $(SUB_lua)
 340
 341 # the following files are not mentioned in any other Makefile
 342 EXTRA_DIST = perl-piped/MANIFEST perl-piped/README perl-piped/Makefile.PL perl-piped/RRDp.pm perl-piped/t/base.t \
 343              perl-shared/ntmake-build perl-shared/MANIFEST perl-shared/README perl-shared/Makefile.PL perl-shared/RRDs.pm  perl-shared/RRDs.xs perl-shared/t/base.t \
 344              ruby/CHANGES     ruby/README      ruby/extconf.rb  ruby/main.c      ruby/test.rb \
 345              python/ACKNOWLEDGEMENT python/AUTHORS python/COPYING python/README python/rrdtoolmodule.c python/setup.py
 346
 347 all: all-recursive
 348
 349 .SUFFIXES:
 350 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 351         @for dep in $?; do \
 352           case '$(am__configure_deps)' in \
 353             *$$dep*) \
 354               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 355                 && { if test -f $@; then exit 0; else break; fi; }; \
 356               exit 1;; \
 357           esac; \
 358         done; \
 359         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu bindings/Makefile'; \
 360         $(am__cd) $(top_srcdir) && \
 361           $(AUTOMAKE) --gnu bindings/Makefile
 362 .PRECIOUS: Makefile
 363 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 364         @case '$?' in \
 365           *config.status*) \
 366             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 367           *) \
 368             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 369             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 370         esac;
 371
 372 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 373         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 374
 375 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 376         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 377 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 378         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 379 $(am__aclocal_m4_deps):
 380
 381 mostlyclean-libtool:
 382         -rm -f *.lo
 383
 384 clean-libtool:
 385         -rm -rf .libs _libs
 386
 387 # This directory's subdirectories are mostly independent; you can cd
 388 # into them and run `make' without going through this Makefile.
 389 # To change the values of `make' variables: instead of editing Makefiles,
 390 # (1) if the variable is set in `config.status', edit `config.status'
 391 #     (which will cause the Makefiles to be regenerated when you run `make');
 392 # (2) otherwise, pass the desired values on the `make' command line.
 393 $(RECURSIVE_TARGETS):
 394         @failcom='exit 1'; \
 395         for f in x $$MAKEFLAGS; do \
 396           case $$f in \
 397             *=* | --[!k]*);; \
 398             *k*) failcom='fail=yes';; \
 399           esac; \
 400         done; \
 401         dot_seen=no; \
 402         target=`echo $@ | sed s/-recursive//`; \
 403         list='$(SUBDIRS)'; for subdir in $$list; do \
 404           echo "Making $$target in $$subdir"; \
 405           if test "$$subdir" = "."; then \
 406             dot_seen=yes; \
 407             local_target="$$target-am"; \
 408           else \
 409             local_target="$$target"; \
 410           fi; \
 411           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 412           || eval $$failcom; \
 413         done; \
 414         if test "$$dot_seen" = "no"; then \
 415           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 416         fi; test -z "$$fail"
 417
 418 $(RECURSIVE_CLEAN_TARGETS):
 419         @failcom='exit 1'; \
 420         for f in x $$MAKEFLAGS; do \
 421           case $$f in \
 422             *=* | --[!k]*);; \
 423             *k*) failcom='fail=yes';; \
 424           esac; \
 425         done; \
 426         dot_seen=no; \
 427         case "$@" in \
 428           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 429           *) list='$(SUBDIRS)' ;; \
 430         esac; \
 431         rev=''; for subdir in $$list; do \
 432           if test "$$subdir" = "."; then :; else \
 433             rev="$$subdir $$rev"; \
 434           fi; \
 435         done; \
 436         rev="$$rev ."; \
 437         target=`echo $@ | sed s/-recursive//`; \
 438         for subdir in $$rev; do \
 439           echo "Making $$target in $$subdir"; \
 440           if test "$$subdir" = "."; then \
 441             local_target="$$target-am"; \
 442           else \
 443             local_target="$$target"; \
 444           fi; \
 445           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 446           || eval $$failcom; \
 447         done && test -z "$$fail"
 448 tags-recursive:
 449         list='$(SUBDIRS)'; for subdir in $$list; do \
 450           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 451         done
 452 ctags-recursive:
 453         list='$(SUBDIRS)'; for subdir in $$list; do \
 454           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 455         done
 456
 457 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 458         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 459         unique=`for i in $$list; do \
 460             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 461           done | \
 462           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 463               END { if (nonempty) { for (i in files) print i; }; }'`; \
 464         mkid -fID $$unique
 465 tags: TAGS
 466
 467 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 468                 $(TAGS_FILES) $(LISP)
 469         set x; \
 470         here=`pwd`; \
 471         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 472           include_option=--etags-include; \
 473           empty_fix=.; \
 474         else \
 475           include_option=--include; \
 476           empty_fix=; \
 477         fi; \
 478         list='$(SUBDIRS)'; for subdir in $$list; do \
 479           if test "$$subdir" = .; then :; else \
 480             test ! -f $$subdir/TAGS || \
 481               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 482           fi; \
 483         done; \
 484         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 485         unique=`for i in $$list; do \
 486             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 487           done | \
 488           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 489               END { if (nonempty) { for (i in files) print i; }; }'`; \
 490         shift; \
 491         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 492           test -n "$$unique" || unique=$$empty_fix; \
 493           if test $$# -gt 0; then \
 494             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 495               "$$@" $$unique; \
 496           else \
 497             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 498               $$unique; \
 499           fi; \
 500         fi
 501 ctags: CTAGS
 502 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 503                 $(TAGS_FILES) $(LISP)
 504         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 505         unique=`for i in $$list; do \
 506             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 507           done | \
 508           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 509               END { if (nonempty) { for (i in files) print i; }; }'`; \
 510         test -z "$(CTAGS_ARGS)$$unique" \
 511           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 512              $$unique
 513
 514 GTAGS:
 515         here=`$(am__cd) $(top_builddir) && pwd` \
 516           && $(am__cd) $(top_srcdir) \
 517           && gtags -i $(GTAGS_ARGS) "$$here"
 518
 519 distclean-tags:
 520         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 521
 522 distdir: $(DISTFILES)
 523         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 524         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 525         list='$(DISTFILES)'; \
 526           dist_files=`for file in $$list; do echo $$file; done | \
 527           sed -e "s|^$$srcdirstrip/||;t" \
 528               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 529         case $$dist_files in \
 530           */*) $(MKDIR_P) `echo "$$dist_files" | \
 531                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 532                            sort -u` ;; \
 533         esac; \
 534         for file in $$dist_files; do \
 535           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 536           if test -d $$d/$$file; then \
 537             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 538             if test -d "$(distdir)/$$file"; then \
 539               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 540             fi; \
 541             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 542               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 543               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 544             fi; \
 545             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 546           else \
 547             test -f "$(distdir)/$$file" \
 548             || cp -p $$d/$$file "$(distdir)/$$file" \
 549             || exit 1; \
 550           fi; \
 551         done
 552         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 553           if test "$$subdir" = .; then :; else \
 554             test -d "$(distdir)/$$subdir" \
 555             || $(MKDIR_P) "$(distdir)/$$subdir" \
 556             || exit 1; \
 557           fi; \
 558         done
 559         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 560           if test "$$subdir" = .; then :; else \
 561             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 562             $(am__relativize); \
 563             new_distdir=$$reldir; \
 564             dir1=$$subdir; dir2="$(top_distdir)"; \
 565             $(am__relativize); \
 566             new_top_distdir=$$reldir; \
 567             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 568             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 569             ($(am__cd) $$subdir && \
 570               $(MAKE) $(AM_MAKEFLAGS) \
 571                 top_distdir="$$new_top_distdir" \
 572                 distdir="$$new_distdir" \
 573                 am__remove_distdir=: \
 574                 am__skip_length_check=: \
 575                 am__skip_mode_fix=: \
 576                 distdir) \
 577               || exit 1; \
 578           fi; \
 579         done
 580 check-am: all-am
 581 check: check-recursive
 582 all-am: Makefile all-local
 583 installdirs: installdirs-recursive
 584 installdirs-am:
 585 install: install-recursive
 586 install-exec: install-exec-recursive
 587 install-data: install-data-recursive
 588 uninstall: uninstall-recursive
 589
 590 install-am: all-am
 591         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 592
 593 installcheck: installcheck-recursive
 594 install-strip:
 595         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 596           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 597           `test -z '$(STRIP)' || \
 598             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 599 mostlyclean-generic:
 600
 601 clean-generic:
 602
 603 distclean-generic:
 604         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 605         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 606
 607 maintainer-clean-generic:
 608         @echo "This command is intended for maintainers to use"
 609         @echo "it deletes files that may require special tools to rebuild."
 610 clean: clean-recursive
 611
 612 clean-am: clean-generic clean-libtool clean-local mostlyclean-am
 613
 614 distclean: distclean-recursive
 615         -rm -f Makefile
 616 distclean-am: clean-am distclean-generic distclean-tags
 617
 618 dvi: dvi-recursive
 619
 620 dvi-am:
 621
 622 html: html-recursive
 623
 624 html-am:
 625
 626 info: info-recursive
 627
 628 info-am:
 629
 630 install-data-am: install-data-local
 631
 632 install-dvi: install-dvi-recursive
 633
 634 install-dvi-am:
 635
 636 install-exec-am:
 637
 638 install-html: install-html-recursive
 639
 640 install-html-am:
 641
 642 install-info: install-info-recursive
 643
 644 install-info-am:
 645
 646 install-man:
 647
 648 install-pdf: install-pdf-recursive
 649
 650 install-pdf-am:
 651
 652 install-ps: install-ps-recursive
 653
 654 install-ps-am:
 655
 656 installcheck-am:
 657
 658 maintainer-clean: maintainer-clean-recursive
 659         -rm -f Makefile
 660 maintainer-clean-am: distclean-am maintainer-clean-generic
 661
 662 mostlyclean: mostlyclean-recursive
 663
 664 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 665
 666 pdf: pdf-recursive
 667
 668 pdf-am:
 669
 670 ps: ps-recursive
 671
 672 ps-am:
 673
 674 uninstall-am:
 675
 676 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
 677         install-am install-strip tags-recursive
 678
 679 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 680         all all-am all-local check check-am clean clean-generic \
 681         clean-libtool clean-local ctags ctags-recursive distclean \
 682         distclean-generic distclean-libtool distclean-tags distdir dvi \
 683         dvi-am html html-am info info-am install install-am \
 684         install-data install-data-am install-data-local install-dvi \
 685         install-dvi-am install-exec install-exec-am install-html \
 686         install-html-am install-info install-info-am install-man \
 687         install-pdf install-pdf-am install-ps install-ps-am \
 688         install-strip installcheck installcheck-am installdirs \
 689         installdirs-am maintainer-clean maintainer-clean-generic \
 690         mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
 691         ps ps-am tags tags-recursive uninstall uninstall-am
 692
 693 .PHONY: python ruby
 694
 695 # add the following to the all target
 696 all-local:  @COMP_PERL@ @COMP_RUBY@ @COMP_PYTHON@
 697
 698 install-data-local:
 699         $(AM_V_GEN)test -f perl-piped/Makefile && cd perl-piped && $(MAKE) install || true
 700         $(AM_V_GEN)test -f perl-shared/Makefile && cd perl-shared && $(MAKE) install || true
 701         $(AM_V_GEN)test -f ruby/Makefile && cd ruby && $(MAKE) EPREFIX=$(DESTDIR)$(exec_prefix) $(RUBY_MAKE_OPTIONS) install || true
 702         $(AM_V_GEN)test -d python/build && cd python && env BUILDLIBDIR=../../src/.libs $(PYTHON) setup.py install --skip-build --prefix=$(DESTDIR)$(prefix) --exec-prefix=$(DESTDIR)$(exec_prefix) || true
 703
 704 # rules for building the ruby module
 705 # RUBYARCHDIR= is to work around in a makefile quirk not sure
 706 # it is is the right thing todo, but it makes rrdtool build on freebsd as well
 707 ruby:   Makefile
 708         cd ruby && $(RUBY) extconf.rb && $(MAKE) EPREFIX=$(exec_prefix) $(RUBY_MAKE_OPTIONS) RUBYARCHDIR=
 709
 710 # rules for building the pyton module
 711 python: Makefile
 712         cd python && env BUILDLIBDIR=../../src/.libs $(PYTHON) setup.py build_ext --rpath=$(libdir) && env LIBDIR=../../src/.libs $(PYTHON) setup.py build
 713
 714 # rules for building the perl module
 715 perl_piped: perl-piped/Makefile
 716         cd perl-piped && $(MAKE)
 717
 718 perl-piped/Makefile: perl-piped/Makefile.PL
 719         cd perl-piped && $(PERL) Makefile.PL $(PERL_MAKE_OPTIONS)
 720
 721 perl_shared: perl-shared/Makefile
 722         cd perl-shared && $(MAKE)
 723
 724 perl-shared/Makefile: perl-shared/Makefile.PL Makefile
 725         cd perl-shared && $(PERL) Makefile.PL $(PERLFLAGS) $(PERL_MAKE_OPTIONS) RPATH=$(libdir)
 726 # LIBS="$(LDFLAGS) $(LIBS)" $(PERLFLAGS) $(PERL_MAKE_OPTIONS)
 727
 728 clean-local:
 729         test -f perl-piped/Makefile && cd perl-piped && $(MAKE) clean || true
 730         test -f perl-piped/Makefile && rm perl-piped/Makefile || true
 731         test -f perl-shared/Makefile && cd perl-shared && $(MAKE) clean || true
 732         test -f perl-shared/Makefile && rm -f perl-shared/Makefile || true
 733         test -f ruby/Makefile && cd ruby && $(MAKE) clean && rm Makefile || true
 734         test -d python/build && cd python &&  rm -rf build || true
 735
 736 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 737 # Otherwise a system limit (for SysV at least) may be exceeded.
 738 .NOEXPORT: