1 # Makefile.in generated by automake 1.11 from Makefile.am.
2 # @configure_input@
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
6 # Inc.
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14 # PARTICULAR PURPOSE.
16 @SET_MAKE@
17 VPATH = @srcdir@
18 pkgdatadir = $(datadir)/@PACKAGE@
19 pkgincludedir = $(includedir)/@PACKAGE@
20 pkglibdir = $(libdir)/@PACKAGE@
21 pkglibexecdir = $(libexecdir)/@PACKAGE@
22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
23 install_sh_DATA = $(install_sh) -c -m 644
24 install_sh_PROGRAM = $(install_sh) -c
25 install_sh_SCRIPT = $(install_sh) -c
26 INSTALL_HEADER = $(INSTALL_DATA)
27 transform = $(program_transform_name)
28 NORMAL_INSTALL = :
29 PRE_INSTALL = :
30 POST_INSTALL = :
31 NORMAL_UNINSTALL = :
32 PRE_UNINSTALL = :
33 POST_UNINSTALL = :
34 build_triplet = @build@
35 host_triplet = @host@
36 target_triplet = @target@
37 subdir = bindings
38 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
40 am__aclocal_m4_deps = $(top_srcdir)/m4/acinclude.m4 \
41 $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
42 $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
43 $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
44 $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
45 $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
46 $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
47 $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
48 $(top_srcdir)/configure.ac
49 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
50 $(ACLOCAL_M4)
51 mkinstalldirs = $(install_sh) -d
52 CONFIG_HEADER = $(top_builddir)/rrd_config.h
53 CONFIG_CLEAN_FILES =
54 CONFIG_CLEAN_VPATH_FILES =
55 AM_V_GEN = $(am__v_GEN_$(V))
56 am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
57 am__v_GEN_0 = @echo " GEN " $@;
58 AM_V_at = $(am__v_at_$(V))
59 am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
60 am__v_at_0 = @
61 SOURCES =
62 DIST_SOURCES =
63 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
64 html-recursive info-recursive install-data-recursive \
65 install-dvi-recursive install-exec-recursive \
66 install-html-recursive install-info-recursive \
67 install-pdf-recursive install-ps-recursive install-recursive \
68 installcheck-recursive installdirs-recursive pdf-recursive \
69 ps-recursive uninstall-recursive
70 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
71 distclean-recursive maintainer-clean-recursive
72 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
73 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
74 distdir
75 ETAGS = etags
76 CTAGS = ctags
77 DIST_SUBDIRS = tcl lua
78 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
79 am__relativize = \
80 dir0=`pwd`; \
81 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
82 sed_rest='s,^[^/]*/*,,'; \
83 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
84 sed_butlast='s,/*[^/]*$$,,'; \
85 while test -n "$$dir1"; do \
86 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
87 if test "$$first" != "."; then \
88 if test "$$first" = ".."; then \
89 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
90 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
91 else \
92 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
93 if test "$$first2" = "$$first"; then \
94 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
95 else \
96 dir2="../$$dir2"; \
97 fi; \
98 dir0="$$dir0"/"$$first"; \
99 fi; \
100 fi; \
101 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
102 done; \
103 reldir="$$dir2"
104 ACLOCAL = @ACLOCAL@
105 ALL_LIBS = @ALL_LIBS@
106 AMTAR = @AMTAR@
107 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
108 AR = @AR@
109 AUTOCONF = @AUTOCONF@
110 AUTOHEADER = @AUTOHEADER@
111 AUTOMAKE = @AUTOMAKE@
112 AWK = @AWK@
113 CC = @CC@
114 CCDEPMODE = @CCDEPMODE@
115 CFLAGS = @CFLAGS@
116 COMP_LUA = @COMP_LUA@
117 COMP_PERL = @COMP_PERL@
118 COMP_PYTHON = @COMP_PYTHON@
119 COMP_RUBY = @COMP_RUBY@
120 CORE_LIBS = @CORE_LIBS@
121 CPP = @CPP@
122 CPPFLAGS = @CPPFLAGS@
123 CYGPATH_W = @CYGPATH_W@
124 DEFS = @DEFS@
125 DEPDIR = @DEPDIR@
126 DSYMUTIL = @DSYMUTIL@
127 DUMPBIN = @DUMPBIN@
128 ECHO_C = @ECHO_C@
129 ECHO_N = @ECHO_N@
130 ECHO_T = @ECHO_T@
131 EGREP = @EGREP@
132 EXEEXT = @EXEEXT@
133 FGREP = @FGREP@
134 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
135 GMSGFMT = @GMSGFMT@
136 GMSGFMT_015 = @GMSGFMT_015@
137 GREP = @GREP@
138 INSTALL = @INSTALL@
139 INSTALL_DATA = @INSTALL_DATA@
140 INSTALL_PROGRAM = @INSTALL_PROGRAM@
141 INSTALL_SCRIPT = @INSTALL_SCRIPT@
142 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
143 INTLLIBS = @INTLLIBS@
144 INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
145 LD = @LD@
146 LDFLAGS = @LDFLAGS@
147 LIBICONV = @LIBICONV@
148 LIBINTL = @LIBINTL@
149 LIBOBJS = @LIBOBJS@
150 LIBS = @LIBS@
151 LIBTOOL = @LIBTOOL@
152 LIBVERS = @LIBVERS@
153 LIPO = @LIPO@
154 LN_S = @LN_S@
155 LTLIBICONV = @LTLIBICONV@
156 LTLIBINTL = @LTLIBINTL@
157 LTLIBOBJS = @LTLIBOBJS@
158 LUA = @LUA@
159 LUA_CFLAGS = @LUA_CFLAGS@
160 LUA_DEFINES = @LUA_DEFINES@
161 LUA_INSTALL_CMOD = @LUA_INSTALL_CMOD@
162 LUA_INSTALL_LMOD = @LUA_INSTALL_LMOD@
163 LUA_LFLAGS = @LUA_LFLAGS@
164 MAINT = @MAINT@
165 MAKEINFO = @MAKEINFO@
166 MKDIR_P = @MKDIR_P@
167 MSGFMT = @MSGFMT@
168 MSGFMT_015 = @MSGFMT_015@
169 MSGMERGE = @MSGMERGE@
170 MULTITHREAD_CFLAGS = @MULTITHREAD_CFLAGS@
171 MULTITHREAD_LDFLAGS = @MULTITHREAD_LDFLAGS@
172 NM = @NM@
173 NMEDIT = @NMEDIT@
174 NROFF = @NROFF@
175 NUMVERS = @NUMVERS@
176 OBJDUMP = @OBJDUMP@
177 OBJEXT = @OBJEXT@
178 OTOOL = @OTOOL@
179 OTOOL64 = @OTOOL64@
180 PACKAGE = @PACKAGE@
181 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
182 PACKAGE_NAME = @PACKAGE_NAME@
183 PACKAGE_STRING = @PACKAGE_STRING@
184 PACKAGE_TARNAME = @PACKAGE_TARNAME@
185 PACKAGE_VERSION = @PACKAGE_VERSION@
186 PATH_SEPARATOR = @PATH_SEPARATOR@
187 PERL = @PERL@
188 PERLCC = @PERLCC@
189 PERLCCFLAGS = @PERLCCFLAGS@
190 PERLFLAGS = @PERLFLAGS@
191 PERLLD = @PERLLD@
192 PERLLDFLAGS = @PERLLDFLAGS@
193 PERL_CC = @PERL_CC@
194 PERL_MAKE_OPTIONS = @PERL_MAKE_OPTIONS@
195 PERL_VERSION = @PERL_VERSION@
196 PKGCONFIG = @PKGCONFIG@
197 POD2HTML = @POD2HTML@
198 POD2MAN = @POD2MAN@
199 POSUB = @POSUB@
200 PTHREAD_CC = @PTHREAD_CC@
201 PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
202 PTHREAD_LIBS = @PTHREAD_LIBS@
203 PYTHON = @PYTHON@
204 PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
205 PYTHON_INCLUDES = @PYTHON_INCLUDES@
206 PYTHON_PLATFORM = @PYTHON_PLATFORM@
207 PYTHON_PREFIX = @PYTHON_PREFIX@
208 PYTHON_VERSION = @PYTHON_VERSION@
209 RANLIB = @RANLIB@
210 RRDDOCDIR = @RRDDOCDIR@
211 RRDGRAPH_YLEGEND_ANGLE = @RRDGRAPH_YLEGEND_ANGLE@
212 RRD_DEFAULT_FONT = @RRD_DEFAULT_FONT@
213 RRD_GETOPT_LONG = @RRD_GETOPT_LONG@
214 RUBY = @RUBY@
215 RUBY_MAKE_OPTIONS = @RUBY_MAKE_OPTIONS@
216 SED = @SED@
217 SET_MAKE = @SET_MAKE@
218 SHELL = @SHELL@
219 STRIP = @STRIP@
220 TCL_INCLUDE_SPEC = @TCL_INCLUDE_SPEC@
221 TCL_LD_SEARCH_FLAGS = @TCL_LD_SEARCH_FLAGS@
222 TCL_PACKAGE_DIR = @TCL_PACKAGE_DIR@
223 TCL_PACKAGE_PATH = @TCL_PACKAGE_PATH@
224 TCL_PREFIX = @TCL_PREFIX@
225 TCL_SHLIB_CFLAGS = @TCL_SHLIB_CFLAGS@
226 TCL_SHLIB_LD = @TCL_SHLIB_LD@
227 TCL_SHLIB_SUFFIX = @TCL_SHLIB_SUFFIX@
228 TCL_STUB_LIB_SPEC = @TCL_STUB_LIB_SPEC@
229 TCL_VERSION = @TCL_VERSION@
230 TROFF = @TROFF@
231 USE_NLS = @USE_NLS@
232 VERSION = @VERSION@
233 WERROR = @WERROR@
234 XGETTEXT = @XGETTEXT@
235 XGETTEXT_015 = @XGETTEXT_015@
236 XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
237 abs_builddir = @abs_builddir@
238 abs_srcdir = @abs_srcdir@
239 abs_top_builddir = @abs_top_builddir@
240 abs_top_srcdir = @abs_top_srcdir@
241 ac_ct_CC = @ac_ct_CC@
242 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
243 acx_pthread_config = @acx_pthread_config@
244 am__include = @am__include@
245 am__leading_dot = @am__leading_dot@
246 am__quote = @am__quote@
247 am__tar = @am__tar@
248 am__untar = @am__untar@
249 bindir = @bindir@
250 build = @build@
251 build_alias = @build_alias@
252 build_cpu = @build_cpu@
253 build_os = @build_os@
254 build_vendor = @build_vendor@
255 builddir = @builddir@
256 datadir = @datadir@
257 datarootdir = @datarootdir@
258 docdir = @docdir@
259 dvidir = @dvidir@
260 exec_prefix = @exec_prefix@
261 host = @host@
262 host_alias = @host_alias@
263 host_cpu = @host_cpu@
264 host_os = @host_os@
265 host_vendor = @host_vendor@
266 htmldir = @htmldir@
267 includedir = @includedir@
268 infodir = @infodir@
269 install_sh = @install_sh@
270 libdir = @libdir@
271 libexecdir = @libexecdir@
272 localedir = @localedir@
273 localstatedir = @localstatedir@
274 lt_ECHO = @lt_ECHO@
275 mandir = @mandir@
276 mkdir_p = @mkdir_p@
277 oldincludedir = @oldincludedir@
278 pdfdir = @pdfdir@
279 pkgpyexecdir = @pkgpyexecdir@
280 pkgpythondir = @pkgpythondir@
281 prefix = @prefix@
282 program_transform_name = @program_transform_name@
283 psdir = @psdir@
284 pyexecdir = @pyexecdir@
285 pythondir = @pythondir@
286 sbindir = @sbindir@
287 sharedstatedir = @sharedstatedir@
288 srcdir = @srcdir@
289 sysconfdir = @sysconfdir@
290 target = @target@
291 target_alias = @target_alias@
292 target_cpu = @target_cpu@
293 target_os = @target_os@
294 target_vendor = @target_vendor@
295 top_build_prefix = @top_build_prefix@
296 top_builddir = @top_builddir@
297 top_srcdir = @top_srcdir@
298 @BUILD_TCL_TRUE@SUB_tcl = tcl
299 @BUILD_LUA_TRUE@SUB_lua = lua
300 SUBDIRS = $(SUB_tcl) $(SUB_lua)
302 # the following files are not mentioned in any other Makefile
303 EXTRA_DIST = perl-piped/MANIFEST perl-piped/README perl-piped/Makefile.PL perl-piped/RRDp.pm perl-piped/t/base.t \
304 perl-shared/ntmake-build perl-shared/MANIFEST perl-shared/README perl-shared/Makefile.PL perl-shared/RRDs.pm perl-shared/RRDs.xs perl-shared/t/base.t \
305 ruby/CHANGES ruby/README ruby/extconf.rb ruby/main.c ruby/test.rb \
306 python/ACKNOWLEDGEMENT python/AUTHORS python/COPYING python/README python/rrdtoolmodule.c python/setup.py
308 all: all-recursive
310 .SUFFIXES:
311 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
312 @for dep in $?; do \
313 case '$(am__configure_deps)' in \
314 *$$dep*) \
315 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
316 && { if test -f $@; then exit 0; else break; fi; }; \
317 exit 1;; \
318 esac; \
319 done; \
320 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu bindings/Makefile'; \
321 $(am__cd) $(top_srcdir) && \
322 $(AUTOMAKE) --gnu bindings/Makefile
323 .PRECIOUS: Makefile
324 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
325 @case '$?' in \
326 *config.status*) \
327 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
328 *) \
329 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
330 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
331 esac;
333 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
334 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
336 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
337 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
338 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
339 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
340 $(am__aclocal_m4_deps):
342 mostlyclean-libtool:
343 -rm -f *.lo
345 clean-libtool:
346 -rm -rf .libs _libs
348 # This directory's subdirectories are mostly independent; you can cd
349 # into them and run `make' without going through this Makefile.
350 # To change the values of `make' variables: instead of editing Makefiles,
351 # (1) if the variable is set in `config.status', edit `config.status'
352 # (which will cause the Makefiles to be regenerated when you run `make');
353 # (2) otherwise, pass the desired values on the `make' command line.
354 $(RECURSIVE_TARGETS):
355 @failcom='exit 1'; \
356 for f in x $$MAKEFLAGS; do \
357 case $$f in \
358 *=* | --[!k]*);; \
359 *k*) failcom='fail=yes';; \
360 esac; \
361 done; \
362 dot_seen=no; \
363 target=`echo $@ | sed s/-recursive//`; \
364 list='$(SUBDIRS)'; for subdir in $$list; do \
365 echo "Making $$target in $$subdir"; \
366 if test "$$subdir" = "."; then \
367 dot_seen=yes; \
368 local_target="$$target-am"; \
369 else \
370 local_target="$$target"; \
371 fi; \
372 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
373 || eval $$failcom; \
374 done; \
375 if test "$$dot_seen" = "no"; then \
376 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
377 fi; test -z "$$fail"
379 $(RECURSIVE_CLEAN_TARGETS):
380 @failcom='exit 1'; \
381 for f in x $$MAKEFLAGS; do \
382 case $$f in \
383 *=* | --[!k]*);; \
384 *k*) failcom='fail=yes';; \
385 esac; \
386 done; \
387 dot_seen=no; \
388 case "$@" in \
389 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
390 *) list='$(SUBDIRS)' ;; \
391 esac; \
392 rev=''; for subdir in $$list; do \
393 if test "$$subdir" = "."; then :; else \
394 rev="$$subdir $$rev"; \
395 fi; \
396 done; \
397 rev="$$rev ."; \
398 target=`echo $@ | sed s/-recursive//`; \
399 for subdir in $$rev; do \
400 echo "Making $$target in $$subdir"; \
401 if test "$$subdir" = "."; then \
402 local_target="$$target-am"; \
403 else \
404 local_target="$$target"; \
405 fi; \
406 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
407 || eval $$failcom; \
408 done && test -z "$$fail"
409 tags-recursive:
410 list='$(SUBDIRS)'; for subdir in $$list; do \
411 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
412 done
413 ctags-recursive:
414 list='$(SUBDIRS)'; for subdir in $$list; do \
415 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
416 done
418 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
419 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
420 unique=`for i in $$list; do \
421 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
422 done | \
423 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
424 END { if (nonempty) { for (i in files) print i; }; }'`; \
425 mkid -fID $$unique
426 tags: TAGS
428 TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
429 $(TAGS_FILES) $(LISP)
430 set x; \
431 here=`pwd`; \
432 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
433 include_option=--etags-include; \
434 empty_fix=.; \
435 else \
436 include_option=--include; \
437 empty_fix=; \
438 fi; \
439 list='$(SUBDIRS)'; for subdir in $$list; do \
440 if test "$$subdir" = .; then :; else \
441 test ! -f $$subdir/TAGS || \
442 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
443 fi; \
444 done; \
445 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
446 unique=`for i in $$list; do \
447 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
448 done | \
449 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
450 END { if (nonempty) { for (i in files) print i; }; }'`; \
451 shift; \
452 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
453 test -n "$$unique" || unique=$$empty_fix; \
454 if test $$# -gt 0; then \
455 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
456 "$$@" $$unique; \
457 else \
458 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
459 $$unique; \
460 fi; \
461 fi
462 ctags: CTAGS
463 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
464 $(TAGS_FILES) $(LISP)
465 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
466 unique=`for i in $$list; do \
467 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
468 done | \
469 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
470 END { if (nonempty) { for (i in files) print i; }; }'`; \
471 test -z "$(CTAGS_ARGS)$$unique" \
472 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
473 $$unique
475 GTAGS:
476 here=`$(am__cd) $(top_builddir) && pwd` \
477 && $(am__cd) $(top_srcdir) \
478 && gtags -i $(GTAGS_ARGS) "$$here"
480 distclean-tags:
481 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
483 distdir: $(DISTFILES)
484 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
485 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
486 list='$(DISTFILES)'; \
487 dist_files=`for file in $$list; do echo $$file; done | \
488 sed -e "s|^$$srcdirstrip/||;t" \
489 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
490 case $$dist_files in \
491 */*) $(MKDIR_P) `echo "$$dist_files" | \
492 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
493 sort -u` ;; \
494 esac; \
495 for file in $$dist_files; do \
496 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
497 if test -d $$d/$$file; then \
498 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
499 if test -d "$(distdir)/$$file"; then \
500 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
501 fi; \
502 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
503 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
504 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
505 fi; \
506 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
507 else \
508 test -f "$(distdir)/$$file" \
509 || cp -p $$d/$$file "$(distdir)/$$file" \
510 || exit 1; \
511 fi; \
512 done
513 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
514 if test "$$subdir" = .; then :; else \
515 test -d "$(distdir)/$$subdir" \
516 || $(MKDIR_P) "$(distdir)/$$subdir" \
517 || exit 1; \
518 fi; \
519 done
520 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
521 if test "$$subdir" = .; then :; else \
522 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
523 $(am__relativize); \
524 new_distdir=$$reldir; \
525 dir1=$$subdir; dir2="$(top_distdir)"; \
526 $(am__relativize); \
527 new_top_distdir=$$reldir; \
528 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
529 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
530 ($(am__cd) $$subdir && \
531 $(MAKE) $(AM_MAKEFLAGS) \
532 top_distdir="$$new_top_distdir" \
533 distdir="$$new_distdir" \
534 am__remove_distdir=: \
535 am__skip_length_check=: \
536 am__skip_mode_fix=: \
537 distdir) \
538 || exit 1; \
539 fi; \
540 done
541 check-am: all-am
542 check: check-recursive
543 all-am: Makefile all-local
544 installdirs: installdirs-recursive
545 installdirs-am:
546 install: install-recursive
547 install-exec: install-exec-recursive
548 install-data: install-data-recursive
549 uninstall: uninstall-recursive
551 install-am: all-am
552 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
554 installcheck: installcheck-recursive
555 install-strip:
556 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
557 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
558 `test -z '$(STRIP)' || \
559 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
560 mostlyclean-generic:
562 clean-generic:
564 distclean-generic:
565 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
566 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
568 maintainer-clean-generic:
569 @echo "This command is intended for maintainers to use"
570 @echo "it deletes files that may require special tools to rebuild."
571 clean: clean-recursive
573 clean-am: clean-generic clean-libtool clean-local mostlyclean-am
575 distclean: distclean-recursive
576 -rm -f Makefile
577 distclean-am: clean-am distclean-generic distclean-tags
579 dvi: dvi-recursive
581 dvi-am:
583 html: html-recursive
585 html-am:
587 info: info-recursive
589 info-am:
591 install-data-am: install-data-local
593 install-dvi: install-dvi-recursive
595 install-dvi-am:
597 install-exec-am:
599 install-html: install-html-recursive
601 install-html-am:
603 install-info: install-info-recursive
605 install-info-am:
607 install-man:
609 install-pdf: install-pdf-recursive
611 install-pdf-am:
613 install-ps: install-ps-recursive
615 install-ps-am:
617 installcheck-am:
619 maintainer-clean: maintainer-clean-recursive
620 -rm -f Makefile
621 maintainer-clean-am: distclean-am maintainer-clean-generic
623 mostlyclean: mostlyclean-recursive
625 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
627 pdf: pdf-recursive
629 pdf-am:
631 ps: ps-recursive
633 ps-am:
635 uninstall-am:
637 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
638 install-am install-strip tags-recursive
640 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
641 all all-am all-local check check-am clean clean-generic \
642 clean-libtool clean-local ctags ctags-recursive distclean \
643 distclean-generic distclean-libtool distclean-tags distdir dvi \
644 dvi-am html html-am info info-am install install-am \
645 install-data install-data-am install-data-local install-dvi \
646 install-dvi-am install-exec install-exec-am install-html \
647 install-html-am install-info install-info-am install-man \
648 install-pdf install-pdf-am install-ps install-ps-am \
649 install-strip installcheck installcheck-am installdirs \
650 installdirs-am maintainer-clean maintainer-clean-generic \
651 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
652 ps ps-am tags tags-recursive uninstall uninstall-am
654 .PHONY: python ruby
656 # add the following to the all target
657 all-local: @COMP_PERL@ @COMP_RUBY@ @COMP_PYTHON@
659 install-data-local:
660 $(AM_V_GEN)test -f perl-piped/Makefile && cd perl-piped && $(MAKE) install || true
661 $(AM_V_GEN)test -f perl-shared/Makefile && cd perl-shared && $(MAKE) install || true
662 $(AM_V_GEN)test -f ruby/Makefile && cd ruby && $(MAKE) EPREFIX=$(DESTDIR)$(exec_prefix) $(RUBY_MAKE_OPTIONS) install || true
663 $(AM_V_GEN)test -d python/build && cd python && env BUILDLIBDIR=../../src/.libs $(PYTHON) setup.py install --skip-build --prefix=$(DESTDIR)$(prefix) --exec-prefix=$(DESTDIR)$(exec_prefix) || true
665 # rules for building the ruby module
666 # RUBYARCHDIR= is to work around in a makefile quirk not sure
667 # it is is the right thing todo, but it makes rrdtool build on freebsd as well
668 ruby: Makefile
669 cd ruby && $(RUBY) extconf.rb && $(MAKE) EPREFIX=$(exec_prefix) $(RUBY_MAKE_OPTIONS) RUBYARCHDIR=
671 # rules for building the pyton module
672 python: Makefile
673 cd python && env BUILDLIBDIR=../../src/.libs $(PYTHON) setup.py build_ext --rpath=$(libdir) && env LIBDIR=../../src/.libs $(PYTHON) setup.py build
675 # rules for building the perl module
676 perl_piped: perl-piped/Makefile
677 cd perl-piped && $(MAKE)
679 perl-piped/Makefile: perl-piped/Makefile.PL
680 cd perl-piped && $(PERL) Makefile.PL $(PERL_MAKE_OPTIONS)
682 perl_shared: perl-shared/Makefile
683 cd perl-shared && $(MAKE)
685 perl-shared/Makefile: perl-shared/Makefile.PL Makefile
686 cd perl-shared && $(PERL) Makefile.PL $(PERLFLAGS) $(PERL_MAKE_OPTIONS) RPATH=$(libdir)
687 # LIBS="$(LDFLAGS) $(LIBS)" $(PERLFLAGS) $(PERL_MAKE_OPTIONS)
689 clean-local:
690 test -f perl-piped/Makefile && cd perl-piped && $(MAKE) clean || true
691 test -f perl-piped/Makefile && rm perl-piped/Makefile || true
692 test -f perl-shared/Makefile && cd perl-shared && $(MAKE) clean || true
693 test -f perl-shared/Makefile && rm -f perl-shared/Makefile || true
694 test -f ruby/Makefile && cd ruby && $(MAKE) clean && rm Makefile || true
695 test -d python/build && cd python && rm -rf build || true
697 # Tell versions [3.59,3.63) of GNU make to not export all variables.
698 # Otherwise a system limit (for SysV at least) may be exceeded.
699 .NOEXPORT: