# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ subdir = bindings DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/rrd_config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive ETAGS = etags CTAGS = ctags DIST_SUBDIRS = tcl DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LIBS = @ALL_LIBS@ ALL_LINGUAS = @ALL_LINGUAS@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BUILD_LIBINTL_FALSE = @BUILD_LIBINTL_FALSE@ BUILD_LIBINTL_TRUE = @BUILD_LIBINTL_TRUE@ BUILD_MULTITHREAD_FALSE = @BUILD_MULTITHREAD_FALSE@ BUILD_MULTITHREAD_TRUE = @BUILD_MULTITHREAD_TRUE@ BUILD_RRDCGI_FALSE = @BUILD_RRDCGI_FALSE@ BUILD_RRDCGI_TRUE = @BUILD_RRDCGI_TRUE@ BUILD_TCL_FALSE = @BUILD_TCL_FALSE@ BUILD_TCL_SITE_FALSE = @BUILD_TCL_SITE_FALSE@ BUILD_TCL_SITE_TRUE = @BUILD_TCL_SITE_TRUE@ BUILD_TCL_TRUE = @BUILD_TCL_TRUE@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ COMP_PERL = @COMP_PERL@ COMP_PYTHON = @COMP_PYTHON@ COMP_RUBY = @COMP_RUBY@ CORE_LIBS = @CORE_LIBS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ F77 = @F77@ FFLAGS = @FFLAGS@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIBVERS = @LIBVERS@ LIB_LIBINTL = @LIB_LIBINTL@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ MAKEINFO = @MAKEINFO@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ MULTITHREAD_CFLAGS = @MULTITHREAD_CFLAGS@ MULTITHREAD_LDFLAGS = @MULTITHREAD_LDFLAGS@ NMEDIT = @NMEDIT@ NROFF = @NROFF@ NUMVERS = @NUMVERS@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PERLCC = @PERLCC@ PERLCCFLAGS = @PERLCCFLAGS@ PERLFLAGS = @PERLFLAGS@ PERLLD = @PERLLD@ PERLLDFLAGS = @PERLLDFLAGS@ PERL_CC = @PERL_CC@ PERL_MAKE_OPTIONS = @PERL_MAKE_OPTIONS@ PERL_VERSION = @PERL_VERSION@ PKGCONFIG = @PKGCONFIG@ POD2HTML = @POD2HTML@ POD2MAN = @POD2MAN@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ PTHREAD_CC = @PTHREAD_CC@ PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ PTHREAD_LIBS = @PTHREAD_LIBS@ PYTHON = @PYTHON@ PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ PYTHON_INCLUDES = @PYTHON_INCLUDES@ PYTHON_PLATFORM = @PYTHON_PLATFORM@ PYTHON_PREFIX = @PYTHON_PREFIX@ PYTHON_VERSION = @PYTHON_VERSION@ RANLIB = @RANLIB@ RRDDOCDIR = @RRDDOCDIR@ RRDGRAPH_YLEGEND_ANGLE = @RRDGRAPH_YLEGEND_ANGLE@ RRD_DEFAULT_FONT = @RRD_DEFAULT_FONT@ RUBY = @RUBY@ RUBY_MAKE_OPTIONS = @RUBY_MAKE_OPTIONS@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STATIC_PROGRAMS_FALSE = @STATIC_PROGRAMS_FALSE@ STATIC_PROGRAMS_TRUE = @STATIC_PROGRAMS_TRUE@ STRIP = @STRIP@ TCL_INCLUDE_SPEC = @TCL_INCLUDE_SPEC@ TCL_LD_SEARCH_FLAGS = @TCL_LD_SEARCH_FLAGS@ TCL_PACKAGE_DIR = @TCL_PACKAGE_DIR@ TCL_PACKAGE_PATH = @TCL_PACKAGE_PATH@ TCL_PREFIX = @TCL_PREFIX@ TCL_SHLIB_CFLAGS = @TCL_SHLIB_CFLAGS@ TCL_SHLIB_LD = @TCL_SHLIB_LD@ TCL_SHLIB_SUFFIX = @TCL_SHLIB_SUFFIX@ TCL_STUB_LIB_SPEC = @TCL_STUB_LIB_SPEC@ TCL_VERSION = @TCL_VERSION@ TROFF = @TROFF@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ acx_pthread_config = @acx_pthread_config@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ pkgpyexecdir = @pkgpyexecdir@ pkgpythondir = @pkgpythondir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ pyexecdir = @pyexecdir@ pythondir = @pythondir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target = @target@ target_alias = @target_alias@ target_cpu = @target_cpu@ target_os = @target_os@ target_vendor = @target_vendor@ @BUILD_TCL_TRUE@SUB_tcl = tcl SUBDIRS = $(SUB_tcl) # the following files are not mentioned in any other Makefile EXTRA_DIST = perl-piped/MANIFEST perl-piped/README perl-piped/Makefile.PL perl-piped/RRDp.pm perl-piped/t/base.t \ perl-shared/ntmake.pl perl-shared/MANIFEST perl-shared/README perl-shared/Makefile.PL perl-shared/RRDs.pm perl-shared/RRDs.xs perl-shared/t/base.t \ ruby/CHANGES ruby/README ruby/extconf.rb ruby/main.c ruby/test.rb \ python/ACKNOWLEDGEMENT python/AUTHORS python/COPYING python/README python/rrdtoolmodule.c python/setup.py all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bindings/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign bindings/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(mkdir_p) $(distdir)/perl-piped $(distdir)/perl-piped/t $(distdir)/perl-shared $(distdir)/perl-shared/t $(distdir)/python $(distdir)/ruby @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile all-local installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool clean-local mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-data-local install-exec-am: install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-info-am uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am all-local check \ check-am clean clean-generic clean-libtool clean-local \ clean-recursive ctags ctags-recursive distclean \ distclean-generic distclean-libtool distclean-recursive \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am \ install-data-local install-exec install-exec-am install-info \ install-info-am install-man install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic maintainer-clean-recursive \ mostlyclean mostlyclean-generic mostlyclean-libtool \ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am uninstall-info-am .PHONY: python ruby # add the following to the all target all-local: @COMP_PERL@ @COMP_RUBY@ @COMP_PYTHON@ install-data-local: test -f perl-piped/Makefile && cd perl-piped && $(MAKE) install || true test -f perl-shared/Makefile && cd perl-shared && $(MAKE) install || true test -f ruby/Makefile && cd ruby && $(MAKE) EPREFIX=$(DESTDIR)$(exec_prefix) $(RUBY_MAKE_OPTIONS) install || true test -d python/build && cd python && env BUILDLIBDIR=../../src/.libs $(PYTHON) setup.py install --skip-build --prefix=$(DESTDIR)$(prefix) --exec-prefix=$(DESTDIR)$(exec_prefix) || true # rules for buildung the ruby module # RUBYARCHDIR= is to work around in a makefile quirk not sure # it is is the right thing todo, but it makes rrdtool build on freebsd as well ruby: cd ruby && $(RUBY) extconf.rb && $(MAKE) EPREFIX=$(exec_prefix) $(RUBY_MAKE_OPTIONS) RUBYARCHDIR= # rules for buildung the pyton module python: cd python && env BUILDLIBDIR=../../src/.libs $(PYTHON) setup.py build_ext --rpath=$(libdir) && env LIBDIR=../../src/.libs $(PYTHON) setup.py build # rules for building the perl module perl_piped: perl-piped/Makefile cd perl-piped && $(MAKE) perl-piped/Makefile: perl-piped/Makefile.PL cd perl-piped && $(PERL) Makefile.PL $(PERL_MAKE_OPTIONS) perl_shared: perl-shared/Makefile cd perl-shared && $(MAKE) perl-shared/Makefile: perl-shared/Makefile.PL cd perl-shared && $(PERL) Makefile.PL $(PERLFLAGS) $(PERL_MAKE_OPTIONS) RPATH=$(libdir) # LIBS="$(LDFLAGS) $(LIBS)" $(PERLFLAGS) $(PERL_MAKE_OPTIONS) clean-local: test -f perl-piped/Makefile && cd perl-piped && $(MAKE) clean || true test -f perl-piped/Makefile && rm perl-piped/Makefile || true test -f perl-shared/Makefile && cd perl-shared && $(MAKE) clean || true test -f perl-shared/Makefile && rm -f perl-shared/Makefile || true test -f ruby/Makefile && cd ruby && $(MAKE) clean && rm Makefile || true test -d python/build && cd python && rm -rf build || true # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: