<_name>Area ru.cnc-club.filter.gcodetools_area_area_artefacts_ptg gcodetools.py inkex.py 100 -10 <_param name="help" type="description"> "Create area offset": creates several Inkscape path offsets to fill original path's area up to "Area radius" value. Outlines start from "1/2 D" up to "Area width" total width with "D" steps where D is taken from the nearest tool definition ("Tool diameter" value). Only one offset will be created if the "Area width" is equal to "1/2 D". 5.0 <_option value="mark with an arrow">mark with an arrow <_option value="mark with style">mark with style <_option value="delete">delete <_param name="help" type="description"> Usage: 1. Select all Area Offsets (gray outlines) 2. Object/Ungroup (Shift+Ctrl+G) 3. Press Apply Suspected small objects will be marked out by colored arrows. 1 4 <_param name="help" type="description"> Biarc interpolation tolerance is the maximum distance between path and its approximation. The segment will be split into two segments if the distance between path's segment and it's approximation exceeds biarc interpolation tolerance. 1 0.0 true 0.05 output.ngc true /home 5 mm in None Parameterize Gcode Flip y axis and parameterize Gcode Round all values to 4 digits false <_param name="fullhelp" type="description"> Gcodetools plug-in: converts paths to Gcode (using circular interpolation), makes offset paths and engraves sharp corners using cone cutters. This plug-in calculates Gcode for paths using circular interpolation or linear motion when needed. Tutorials, manuals and support can be found at English support forum: http://www.cnc-club.ru/gcodetools and Russian support forum: http://www.cnc-club.ru/gcodetoolsru Credits: Nick Drobchenko, Vladimir Kalyaev, John Brooker, Henry Nicolas. Gcodetools ver. 1.6.01 path