![[tokkee]](http://tokkee.org/images/avatar.png){kind=avatar}
diff --git a/src/collectd.conf.pod b/src/collectd.conf.pod
index c025f94928552961b2056e70029d2694a128343e..7b9a5598b77c65fae169edc835295c0d2801b15a 100644 (file)
--- a/src/collectd.conf.pod
+++ b/src/collectd.conf.pod
+=encoding UTF-8
+
=head1 NAME
collectd.conf - Configuration for the system statistics collection daemon B<collectd>
BaseDir "/path/to/data/"
PIDFile "/path/to/pidfile/collectd.pid"
Server "123.123.123.123" 12345
-
+
LoadPlugin cpu
LoadPlugin load
+
+ <LoadPlugin df>
+ Interval 3600
+ </LoadPlugin>
+
LoadPlugin ping
-
<Plugin ping>
Host "example.org"
Host "provider.net"
=item B<LoadPlugin> I<Plugin>
-Loads the plugin I<Plugin>. There must be at least one such line or B<collectd>
-will be mostly useless.
+Loads the plugin I<Plugin>. This is required to load plugins, unless the
+B<AutoLoadPlugin> option is enabled (see below). Without any loaded plugins,
+I<collectd> will be mostly useless.
-Starting with collectd 4.9, this may also be a block in which further options
-affecting the behavior of B<LoadPlugin> may be specified. The following
-options are allowed inside a B<LoadPlugin> block:
+Only the first B<LoadPlugin> statement or block for a given plugin name has any
+effect. This is useful when you want to split up the configuration into smaller
+files and want each file to be "self contained", i.e. it contains a B<Plugin>
+block I<and> then appropriate B<LoadPlugin> statement. The downside is that if
+you have multiple conflicting B<LoadPlugin> blocks, e.g. when they specify
+different intervals, only one of them (the first one encountered) will take
+effect and all others will be silently ignored.
- <LoadPlugin perl>
- Globals true
- </LoadPlugin>
+B<LoadPlugin> may either be a simple configuration I<statement> or a I<block>
+with additional options, affecting the behavior of B<LoadPlugin>. A simple
+statement looks like this:
+
+ LoadPlugin "cpu"
+
+Options inside a B<LoadPlugin> block can override default settings and
+influence the way plugins are loaded, e.g.:
+
+ <LoadPlugin perl>
+ Globals true
+ Interval 60
+ </LoadPlugin>
+
+The following options are valid inside B<LoadPlugin> blocks:
=over 4
either C<perl> or C<python>, the default is changed to enabled in order to keep
the average user from ever having to deal with this low level linking stuff.
+=item B<Interval> I<Seconds>
+
+Sets a plugin-specific interval for collecting metrics. This overrides the
+global B<Interval> setting. If a plugin provides own support for specifying an
+interval, that setting will take precedence.
+
=back
-=item B<Include> I<Path>
+=item B<AutoLoadPlugin> B<false>|B<true>
+
+When set to B<false> (the default), each plugin needs to be loaded explicitly,
+using the B<LoadPlugin> statement documented above. If a
+B<E<lt>PluginE<nbsp>...E<gt>> block is encountered and no configuration
+handling callback for this plugin has been registered, a warning is logged and
+the block is ignored.
+
+When set to B<true>, explicit B<LoadPlugin> statements are not required. Each
+B<E<lt>PluginE<nbsp>...E<gt>> block acts as if it was immediately preceded by a
+B<LoadPlugin> statement. B<LoadPlugin> statements are still required for
+plugins that don't provide any configuration, e.g. the I<Load plugin>.
+
+=item B<Include> I<Path> [I<pattern>]
If I<Path> points to a file, includes that file. If I<Path> points to a
directory, recursively includes all files within that directory and its
Include "/etc/collectd.d/*.conf"
+Starting with version 5.3, this may also be a block in which further options
+affecting the behavior of B<Include> may be specified. The following option is
+currently allowed:
+
+ <Include "/etc/collectd.d">
+ Filter "*.conf"
+ </Include>
+
+=over 4
+
+=item B<Filter> I<pattern>
+
+If the C<fnmatch> function is available on your system, a shell-like wildcard
+I<pattern> may be specified to filter which files to include. This may be used
+in combination with recursively including a directory to easily be able to
+arbitrarily mix configuration files and other documents (e.g. README files).
+The given example is similar to the first example above but includes all files
+matching C<*.conf> in any subdirectory of C</etc/collectd.d>:
+
+ Include "/etc/collectd.d" "*.conf"
+
+=back
+
If more than one files are included by a single B<Include> option, the files
will be included in lexicographical order (as defined by the C<strcmp>
function). Thus, you can e.E<nbsp>g. use numbered prefixes to specify the
Number of threads to start for reading plugins. The default value is B<5>, but
you may want to increase this if you have more than five plugins that take a
-long time to read. Mostly those are plugin that do network-IO. Setting this to
-a value higher than the number of plugins you've loaded is totally useless.
+long time to read. Mostly those are plugins that do network-IO. Setting this to
+a value higher than the number of registered read callbacks is not recommended.
+
+=item B<WriteThreads> I<Num>
+
+Number of threads to start for dispatching value lists to write plugins. The
+default value is B<5>, but you may want to increase this if you have more than
+five plugins that may take relatively long to write to.
+
+=item B<WriteQueueLimitHigh> I<HighNum>
+
+=item B<WriteQueueLimitLow> I<LowNum>
+
+Metrics are read by the I<read threads> and then put into a queue to be handled
+by the I<write threads>. If one of the I<write plugins> is slow (e.g. network
+timeouts, I/O saturation of the disk) this queue will grow. In order to avoid
+running into memory issues in such a case, you can limit the size of this
+queue.
+
+By default, there is no limit and memory may grow indefinitely. This is most
+likely not an issue for clients, i.e. instances that only handle the local
+metrics. For servers it is recommended to set this to a non-zero value, though.
+
+You can set the limits using B<WriteQueueLimitHigh> and B<WriteQueueLimitLow>.
+Each of them takes a numerical argument which is the number of metrics in the
+queue. If there are I<HighNum> metrics in the queue, any new metrics I<will> be
+dropped. If there are less than I<LowNum> metrics in the queue, all new metrics
+I<will> be enqueued. If the number of metrics currently in the queue is between
+I<LowNum> and I<HighNum>, the metric is dropped with a probability that is
+proportional to the number of metrics in the queue (i.e. it increases linearly
+until it reaches 100%.)
+
+If B<WriteQueueLimitHigh> is set to non-zero and B<WriteQueueLimitLow> is
+unset, the latter will default to half of B<WriteQueueLimitHigh>.
+
+If you do not want to randomly drop values when the queue size is between
+I<LowNum> and I<HighNum>, set If B<WriteQueueLimitHigh> and
+B<WriteQueueLimitLow> to same value.
=item B<Hostname> I<Name>
@@ -193,12 +294,183 @@ C<Plugin>-Section. Which options exist depends on the plugin used. Some plugins
require external configuration, too. The C<apache plugin>, for example,
required C<mod_status> to be configured in the webserver you're going to
collect data from. These plugins are listed below as well, even if they don't
-require any configuration within collectd's configfile.
+require any configuration within collectd's configuration file.
A list of all plugins and a short summary for each plugin can be found in the
F<README> file shipped with the sourcecode and hopefully binary packets as
well.
+=head2 Plugin C<aggregation>
+
+The I<Aggregation plugin> makes it possible to aggregate several values into
+one using aggregation functions such as I<sum>, I<average>, I<min> and I<max>.
+This can be put to a wide variety of uses, e.g. average and total CPU
+statistics for your entire fleet.
+
+The grouping is powerful but, as with many powerful tools, may be a bit
+difficult to wrap your head around. The grouping will therefore be
+demonstrated using an example: The average and sum of the CPU usage across
+all CPUs of each host is to be calculated.
+
+To select all the affected values for our example, set C<Plugin cpu> and
+C<Type cpu>. The other values are left unspecified, meaning "all values". The
+I<Host>, I<Plugin>, I<PluginInstance>, I<Type> and I<TypeInstance> options
+work as if they were specified in the C<WHERE> clause of an C<SELECT> SQL
+statement.
+
+ Plugin "cpu"
+ Type "cpu"
+
+Although the I<Host>, I<PluginInstance> (CPU number, i.e. 0, 1, 2, ...) and
+I<TypeInstance> (idle, user, system, ...) fields are left unspecified in the
+example, the intention is to have a new value for each host / type instance
+pair. This is achieved by "grouping" the values using the C<GroupBy> option.
+It can be specified multiple times to group by more than one field.
+
+ GroupBy "Host"
+ GroupBy "TypeInstance"
+
+We do neither specify nor group by I<plugin instance> (the CPU number), so all
+metrics that differ in the CPU number only will be aggregated. Each
+aggregation needs I<at least one> such field, otherwise no aggregation would
+take place.
+
+The full example configuration looks like this:
+
+ <Plugin "aggregation">
+ <Aggregation>
+ Plugin "cpu"
+ Type "cpu"
+
+ GroupBy "Host"
+ GroupBy "TypeInstance"
+
+ CalculateSum true
+ CalculateAverage true
+ </Aggregation>
+ </Plugin>
+
+There are a couple of limitations you should be aware of:
+
+=over 4
+
+=item
+
+The I<Type> cannot be left unspecified, because it is not reasonable to add
+apples to oranges. Also, the internal lookup structure won't work if you try
+to group by type.
+
+=item
+
+There must be at least one unspecified, ungrouped field. Otherwise nothing
+will be aggregated.
+
+=back
+
+As you can see in the example above, each aggregation has its own
+B<Aggregation> block. You can have multiple aggregation blocks and aggregation
+blocks may match the same values, i.e. one value list can update multiple
+aggregations. The following options are valid inside B<Aggregation> blocks:
+
+=over 4
+
+=item B<Host> I<Host>
+
+=item B<Plugin> I<Plugin>
+
+=item B<PluginInstance> I<PluginInstance>
+
+=item B<Type> I<Type>
+
+=item B<TypeInstance> I<TypeInstance>
+
+Selects the value lists to be added to this aggregation. B<Type> must be a
+valid data set name, see L<types.db(5)> for details.
+
+If the string starts with and ends with a slash (C</>), the string is
+interpreted as a I<regular expression>. The regex flavor used are POSIX
+extended regular expressions as described in L<regex(7)>. Example usage:
+
+ Host "/^db[0-9]\\.example\\.com$/"
+
+=item B<GroupBy> B<Host>|B<Plugin>|B<PluginInstance>|B<TypeInstance>
+
+Group valued by the specified field. The B<GroupBy> option may be repeated to
+group by multiple fields.
+
+=item B<SetHost> I<Host>
+
+=item B<SetPlugin> I<Plugin>
+
+=item B<SetPluginInstance> I<PluginInstance>
+
+=item B<SetTypeInstance> I<TypeInstance>
+
+Sets the appropriate part of the identifier to the provided string.
+
+The I<PluginInstance> should include the placeholder C<%{aggregation}> which
+will be replaced with the aggregation function, e.g. "average". Not including
+the placeholder will result in duplication warnings and/or messed up values if
+more than one aggregation function are enabled.
+
+The following example calculates the average usage of all "even" CPUs:
+
+ <Plugin "aggregation">
+ <Aggregation>
+ Plugin "cpu"
+ PluginInstance "/[0,2,4,6,8]$/"
+ Type "cpu"
+
+ SetPlugin "cpu"
+ SetPluginInstance "even-%{aggregation}"
+
+ GroupBy "Host"
+ GroupBy "TypeInstance"
+
+ CalculateAverage true
+ </Aggregation>
+ </Plugin>
+
+This will create the files:
+
+=over 4
+
+=item
+
+foo.example.com/cpu-even-average/cpu-idle
+
+=item
+
+foo.example.com/cpu-even-average/cpu-system
+
+=item
+
+foo.example.com/cpu-even-average/cpu-user
+
+=item
+
+...
+
+=back
+
+=item B<CalculateNum> B<true>|B<false>
+
+=item B<CalculateSum> B<true>|B<false>
+
+=item B<CalculateAverage> B<true>|B<false>
+
+=item B<CalculateMinimum> B<true>|B<false>
+
+=item B<CalculateMaximum> B<true>|B<false>
+
+=item B<CalculateStddev> B<true>|B<false>
+
+Boolean options for enabling calculation of the number of value lists, their
+sum, average, minimum, maximum andE<nbsp>/ or standard deviation. All options
+are disabled by default.
+
+=back
+
=head2 Plugin C<amqp>
The I<AMQMP plugin> can be used to communicate with other instances of
# Persistent false
# Format "command"
# StoreRates false
+ # GraphitePrefix "collectd."
+ # GraphiteEscapeChar "_"
</Publish>
# Receive values from an AMQP broker
default), the I<transient> delivery mode will be used, i.e. messages may be
lost due to high load, overflowing queues or similar issues.
-=item B<Format> B<Command>|B<JSON> (Publish only)
+=item B<Format> B<Command>|B<JSON>|B<Graphite> (Publish only)
Selects the format in which messages are sent to the broker. If set to
B<Command> (the default), values are sent as C<PUTVAL> commands which are
@@ -320,6 +594,10 @@ If set to B<JSON>, the values are encoded in the I<JavaScript Object Notation>,
an easy and straight forward exchange format. The C<Content-Type> header field
will be set to C<application/json>.
+If set to B<Graphite>, values are encoded in the I<Graphite> format, which is
+"<metric> <value> <timestamp>\n". The C<Content-Type> header field will be set to
+C<text/graphite>.
+
A subscribing client I<should> use the C<Content-Type> header field to
determine how to decode the values. Currently, the I<AMQP plugin> itself can
only decode the B<Command> format.
Please note that currently this option is only used if the B<Format> option has
been set to B<JSON>.
+=item B<GraphitePrefix> (Publish and B<Format>=I<Graphite> only)
+
+A prefix can be added in the metric name when outputting in the I<Graphite> format.
+It's added before the I<Host> name.
+Metric name will be "<prefix><host><postfix><plugin><type><name>"
+
+=item B<GraphitePostfix> (Publish and B<Format>=I<Graphite> only)
+
+A postfix can be added in the metric name when outputting in the I<Graphite> format.
+It's added after the I<Host> name.
+Metric name will be "<prefix><host><postfix><plugin><type><name>"
+
+=item B<GraphiteEscapeChar> (Publish and B<Format>=I<Graphite> only)
+
+Specify a character to replace dots (.) in the host part of the metric name.
+In I<Graphite> metric name, dots are used as separators between different
+metric parts (host, plugin, type).
+Default is "_" (I<Underscore>).
+
=back
=head2 Plugin C<apache>
TCP-Port to connect to. Defaults to B<3551>.
+=item B<ReportSeconds> B<true|false>
+
+If set to B<true>, the time reported in the C<timeleft> metric will be
+converted to seconds. This is the recommended setting. If set to B<false>, the
+default for backwards compatibility, the time will be reported in minutes.
+
=back
=head2 Plugin C<ascent>
=back
+=head2 Plugin C<cgroups>
+
+This plugin collects the CPU user/system time for each I<cgroup> by reading the
+F<cpuacct.stat> files in the first cpuacct-mountpoint (typically
+F</sys/fs/cgroup/cpu.cpuacct> on machines using systemd).
+
+=over 4
+
+=item B<CGroup> I<Directory>
+
+Select I<cgroup> based on the name. Whether only matching I<cgroups> are
+collected or if they are ignored is controlled by the B<IgnoreSelected> option;
+see below.
+
+=item B<IgnoreSelected> B<true>|B<false>
+
+Invert the selection: If set to true, all cgroups I<except> the ones that
+match any one of the criteria are collected. By default only selected
+cgroups are collected if a selection is made. If no selection is configured
+at all, B<all> cgroups are selected.
+
+=back
+
=head2 Plugin C<cpufreq>
This plugin doesn't have any options. It reads
@@ -716,6 +1042,19 @@ File that holds one or more SSL certificates. If you want to use HTTPS you will
possibly need this option. What CA certificates come bundled with C<libcurl>
and are checked by default depends on the distribution you use.
+=item B<Header> I<Header>
+
+A HTTP header to add to the request. Multiple headers are added if this option
+is specified more than once.
+
+=item B<Post> I<Body>
+
+Specifies that the HTTP operation should be a POST instead of a GET. The
+complete data to be posted is given as the argument. This option will usually
+need to be accompanied by a B<Header> option to set an appropriate
+C<Content-Type> for the post body (e.g. to
+C<application/x-www-form-urlencoded>).
+
=item B<MeasureResponseTime> B<true>|B<false>
Measure response time for the request. If this setting is enabled, B<Match>
Sets the plugin instance to I<Instance>.
=item B<User> I<Name>
-
-Username to use if authorization is required to read the page.
-
=item B<Password> I<Password>
-
-Password to use if authorization is required to read the page.
-
=item B<VerifyPeer> B<true>|B<false>
-
-Enable or disable peer SSL certificate verification. See
-L<http://curl.haxx.se/docs/sslcerts.html> for details. Enabled by default.
-
=item B<VerifyHost> B<true>|B<false>
-
-Enable or disable peer host name verification. If enabled, the plugin checks if
-the C<Common Name> or a C<Subject Alternate Name> field of the SSL certificate
-matches the host name provided by the B<URL> option. If this identity check
-fails, the connection is aborted. Obviously, only works when connecting to a
-SSL enabled server. Enabled by default.
-
=item B<CACert> I<file>
+=item B<Header> I<Header>
+=item B<Post> I<Body>
-File that holds one or more SSL certificates. If you want to use HTTPS you will
-possibly need this option. What CA certificates come bundled with C<libcurl>
-and are checked by default depends on the distribution you use.
+These options behave exactly equivalent to the appropriate options of the
+I<cURL> plugin. Please see there for a detailed description.
=back
Use I<Instance> as the plugin instance when submitting values. Defaults to an
empty string (no plugin instance).
+=item B<Namespace> I<Prefix> I<URL>
+
+If an XPath expression references namespaces, they must be specified
+with this option. I<Prefix> is the "namespace prefix" used in the XML document.
+I<URL> is the "namespace name", an URI reference uniquely identifying the
+namespace. The option can be repeated to register multiple namespaces.
+
+Examples:
+
+ Namespace "s" "http://schemas.xmlsoap.org/soap/envelope/"
+ Namespace "m" "http://www.w3.org/1998/Math/MathML"
+
=item B<User> I<User>
+
=item B<Password> I<Password>
+
=item B<VerifyPeer> B<true>|B<false>
+
=item B<VerifyHost> B<true>|B<false>
+
=item B<CACert> I<CA Cert File>
+=item B<Header> I<Header>
+
+=item B<Post> I<Body>
+
These options behave exactly equivalent to the appropriate options of the
-I<cURL> and I<cURL-JSON> plugins. Please see there for a detailed description.
+I<cURL plugin>. Please see there for a detailed description.
=item E<lt>B<XPath> I<XPath-expression>E<gt>
L<http://libdbi-drivers.sourceforge.net/>. However, the options "host",
"username", "password", and "dbname" seem to be deE<nbsp>facto standards.
+DBDs can register two types of options: String options and numeric options. The
+plugin will use the C<dbi_conn_set_option> function when the configuration
+provides a string and the C<dbi_conn_require_option_numeric> function when the
+configuration provides a number. So these two lines will actually result in
+different calls being used:
+
+ DriverOption "Port" 1234 # numeric
+ DriverOption "Port" "1234" # string
+
Unfortunately, drivers are not too keen to report errors when an unknown option
is passed to them, so invalid settings here may go unnoticed. This is not the
plugin's fault, it will report errors if it gets them from the libraryE<nbsp>/
the driver. If a driver complains about an option, the plugin will dump a
-complete list of all options understood by that driver to the log.
+complete list of all options understood by that driver to the log. There is no
+way to programatically find out if an option expects a string or a numeric
+argument, so you will have to refer to the appropriate DBD's documentation to
+find this out. Sorry.
=item B<SelectDB> I<Database>
blocks you want to refer to must be placed above the database block you want to
refer to them from.
+=item B<Host> I<Hostname>
+
+Sets the B<host> field of I<value lists> to I<Hostname> when dispatching
+values. Defaults to the global hostname setting.
+
=back
=head2 Plugin C<df>
many small files are stored on the disk. This is a usual scenario for mail
transfer agents and web caches.
+=item B<ValuesAbsolute> B<true>|B<false>
+
+Enables or disables reporting of free, used and used disk space in 1K-blocks.
+Defaults to true.
+
+=item B<ValuesPercentage> B<true>|B<false>
+
+Enables or disables reporting of free, used and used disk space in percentage.
+Defaults to false.
+
+This is useful for deploying collectd on the cloud, where machines with
+different disk size may exist. Then it is more practical to configure thresholds
+based on relative disk size.
+
=back
=head2 Plugin C<disk>
@@ -1945,10 +2319,21 @@ interpreted. For a description of match blocks, please see L<"Plugin tail">.
=head2 Plugin C<memcached>
-The C<memcached plugin> connects to a memcached server and queries statistics
+The B<memcached plugin> connects to a memcached server and queries statistics
about cache utilization, memory and bandwidth used.
L<http://www.danga.com/memcached/>
+ <Plugin "memcached">
+ <Instance "name">
+ Host "memcache.example.com"
+ Port 11211
+ </Instance>
+ </Plugin>
+
+The plugin configuration consists of one or more B<Instance> blocks which
+specify one I<memcached> connection each. Within the B<Instance> blocks, the
+following options are allowed:
+
=over 4
=item B<Host> I<Hostname>
TCP-Port to connect to. Defaults to B<11211>.
+=item B<Socket> I<Path>
+
+Connect to I<memcached> using the UNIX domain socket at I<Path>. If this
+setting is given, the B<Host> and B<Port> settings are ignored.
+
+=back
+
+=head2 Plugin C<mic>
+
+The B<mic plugin> gathers CPU statistics, memory usage and temperatures from
+Intel's Many Integrated Core (MIC) systems.
+
+B<Synopsis:>
+
+ <Plugin mic>
+ ShowCPU true
+ ShowCPUCores true
+ ShowMemory true
+
+ ShowTemperatures true
+ Temperature vddg
+ Temperature vddq
+ IgnoreSelectedTemperature true
+
+ ShowPower true
+ Power total0
+ Power total1
+ IgnoreSelectedPower true
+ </Plugin>
+
+The following options are valid inside the B<PluginE<nbsp>mic> block:
+
+=over 4
+
+=item B<ShowCPU> B<true>|B<false>
+
+If enabled (the default) a sum of the CPU usage accross all cores is reported.
+
+=item B<ShowCPUCores> B<true>|B<false>
+
+If enabled (the default) per-core CPU usage is reported.
+
+=item B<ShowMemory> B<true>|B<false>
+
+If enabled (the default) the physical memory usage of the MIC system is
+reported.
+
+=item B<ShowTemperatures> B<true>|B<false>
+
+If enabled (the default) various temperatures of the MIC system are reported.
+
+=item B<Temperature> I<Name>
+
+This option controls which temperatures are being reported. Whether matching
+temperatures are being ignored or I<only> matching temperatures are reported
+depends on the B<IgnoreSelectedTemperature> setting below. By default I<all>
+temperatures are reported.
+
+=item B<IgnoreSelectedTemperature> B<false>|B<true>
+
+Controls the behavior of the B<Temperature> setting above. If set to B<false>
+(the default) only temperatures matching a B<Temperature> option are reported
+or, if no B<Temperature> option is specified, all temperatures are reported. If
+set to B<true>, matching temperatures are I<ignored> and all other temperatures
+are reported.
+
+Known temperature names are:
+
+=over 4
+
+=item die
+
+Die of the CPU
+
+=item devmem
+
+Device Memory
+
+=item fin
+
+Fan In
+
+=item fout
+
+Fan Out
+
+=item vccp
+
+Voltage ccp
+
+=item vddg
+
+Voltage ddg
+
+=item vddq
+
+Voltage ddq
+
+=back
+
+=item B<ShowPower> B<true>|B<false>
+
+If enabled (the default) various temperatures of the MIC system are reported.
+
+=item B<Power> I<Name>
+
+This option controls which power readings are being reported. Whether matching
+power readings are being ignored or I<only> matching power readings are reported
+depends on the B<IgnoreSelectedPower> setting below. By default I<all>
+power readings are reported.
+
+=item B<IgnoreSelectedPower> B<false>|B<true>
+
+Controls the behavior of the B<Power> setting above. If set to B<false>
+(the default) only power readings matching a B<Power> option are reported
+or, if no B<Power> option is specified, all power readings are reported. If
+set to B<true>, matching power readings are I<ignored> and all other power readings
+are reported.
+
+Known power names are:
+
+=over 4
+
+=item total0
+
+Total power utilization averaged over Time Window 0 (uWatts).
+
+=item total1
+
+Total power utilization averaged over Time Window 0 (uWatts).
+
+=item inst
+
+Instantaneous power (uWatts).
+
+=item imax
+
+Max instantaneous power (uWatts).
+
+=item pcie
+
+PCI-E connector power (uWatts).
+
+=item c2x3
+
+2x3 connector power (uWatts).
+
+=item c2x4
+
+2x4 connector power (uWatts).
+
+=item vccp
+
+Core rail (uVolts).
+
+=item vddg
+
+Uncore rail (uVolts).
+
+=item vddq
+
+Memory subsystem rail (uVolts).
+
+=back
+
=back
=head2 Plugin C<modbus>
values), large integer values (unsigned 32E<nbsp>bit values) and floating point
values (two registers interpreted as IEEE floats in big endian notation).
-Synopsis:
+B<Synopsis:>
<Data "voltage-input-1">
RegisterBase 0
IgnoreSelectedSnapshot false
</VolumeUsage>
+ <Quota>
+ Interval 60
+ </Quota>
+
+ <Snapvault>
+ Interval 30
+ </Snapvault>
+
<System>
Interval 30
GetCPULoad true
GetDiskOps true
GetDiskIO true
</System>
+
+ <VFiler vfilerA>
+ Interval 60
+
+ SnapVault true
+ # ...
+ </VFiler>
</Host>
</Plugin>
=item B<Host> I<Name>
A host block defines one NetApp filer. It will appear in collectd with the name
-you specify here which does not have to be its real name nor its hostname.
+you specify here which does not have to be its real name nor its hostname (see
+the B<Address> option below).
+
+=item B<VFiler> I<Name>
+
+A B<VFiler> block may only be used inside a host block. It accepts all the
+same options as the B<Host> block (except for cascaded B<VFiler> blocks) and
+will execute all NetApp API commands in the context of the specified
+VFiler(R). It will appear in collectd with the name you specify here which
+does not have to be its real name. The VFiler name may be specified using the
+B<VFilerName> option. If this is not specified, it will default to the name
+you specify here.
+
+The VFiler block inherits all connection related settings from the surrounding
+B<Host> block (which appear before the B<VFiler> block) but they may be
+overwritten inside the B<VFiler> block.
+
+This feature is useful, for example, when using a VFiler as SnapVault target
+(supported since OnTap 8.1). In that case, the SnapVault statistics are not
+available in the host filer (vfiler0) but only in the respective VFiler
+context.
=item B<Protocol> B<httpd>|B<http>
Type: string
+=item B<VFilerName> I<Name>
+
+The name of the VFiler in which context to execute API commands. If not
+specified, the name provided to the B<VFiler> block will be used instead.
+
+Optional
+
+Type: string
+
+Default: name of the B<VFiler> block
+
+B<Note:> This option may only be used inside B<VFiler> blocks.
+
=item B<Interval> I<Interval>
B<TODO>
=back
+=head3 The Quota block
+
+This will collect (tree) quota statistics (used disk space and number of used
+files). This mechanism is useful to get usage information for single qtrees.
+In case the quotas are not used for any other purpose, an entry similar to the
+following in C</etc/quotas> would be sufficient:
+
+ /vol/volA/some_qtree tree - - - - -
+
+After adding the entry, issue C<quota on -w volA> on the NetApp filer.
+
+=over 4
+
+=item B<Interval> I<Seconds>
+
+Collect SnapVault(R) statistics every I<Seconds> seconds.
+
+=back
+
+=head3 The SnapVault block
+
+This will collect statistics about the time and traffic of SnapVault(R)
+transfers.
+
+=over 4
+
+=item B<Interval> I<Seconds>
+
+Collect SnapVault(R) statistics every I<Seconds> seconds.
+
+=back
+
=head2 Plugin C<netlink>
The C<netlink> plugin uses a netlink socket to query the Linux kernel about
lookups. The default is to do reverse lookups to preserve backwards
compatibility, though.
+=item B<IncludeUnitID> B<true>|B<false>
+
+When a peer is a refclock, include the unit ID in the I<type instance>.
+Defaults to B<false> for backward compatibility.
+
+If two refclock peers use the same driver and this is B<false>, the plugin will
+try to write simultaneous measurements from both to the same type instance.
+This will result in error messages in the log and only one set of measurements
+making it through.
+
=back
=head2 Plugin C<nut>
Defines the "database alias" or "service name" to connect to. Usually, these
names are defined in the file named C<$ORACLE_HOME/network/admin/tnsnames.ora>.
+=item B<Host> I<Host>
+
+Hostname to use when dispatching values for this database. Defaults to using
+the global hostname of the I<collectd> instance.
+
=item B<Username> I<Username>
Username used for authentication.
statistics provided by PostgreSQL without the need to upgrade your collectd
installation.
+Starting with version 5.2, the C<postgresql> plugin supports writing data to
+PostgreSQL databases as well. This has been implemented in a generic way. You
+need to specify an SQL statement which will then be executed by collectd in
+order to write the data (see below for details). The benefit of that approach
+is that there is no fixed database layout. Rather, the layout may be optimized
+for the current setup.
+
The B<PostgreSQL Documentation> manual can be found at
L<http://www.postgresql.org/docs/manuals/>.
</Result>
</Query>
+ <Writer sqlstore>
+ Statement "SELECT collectd_insert($1, $2, $3, $4, $5, $6, $7, $8, $9);"
+ StoreRates true
+ </Writer>
+
<Database foo>
Host "hostname"
Port "5432"
Query backend # predefined
Query rt36_tickets
</Database>
+
+ <Database qux>
+ # ...
+ Writer sqlstore
+ CommitInterval 10
+ </Database>
</Plugin>
The B<Query> block defines one database query which may later be used by a
The name of the database of the current connection.
+=item I<instance>
+
+The name of the database plugin instance. See the B<Instance> option of the
+database specification below for details.
+
=item I<username>
The username used to connect to the database.
=back
+In addition, the following detailed queries are available by default. Please
+note that each of those queries collects information B<by table>, thus,
+potentially producing B<a lot> of data. For details see the description of the
+non-by_table queries above.
+
+=over 4
+
+=item B<queries_by_table>
+
+=item B<query_plans_by_table>
+
+=item B<table_states_by_table>
+
+=item B<disk_io_by_table>
+
+=back
+
+The B<Writer> block defines a PostgreSQL writer backend. It accepts a single
+mandatory argument specifying the name of the writer. This will then be used
+in the B<Database> specification in order to activate the writer instance. The
+names of all writers have to be unique. The following options may be
+specified:
+
+=over 4
+
+=item B<Statement> I<sql statement>
+
+This mandatory option specifies the SQL statement that will be executed for
+each submitted value. A single SQL statement is allowed only. Anything after
+the first semicolon will be ignored.
+
+Nine parameters will be passed to the statement and should be specified as
+tokens B<$1>, B<$2>, through B<$9> in the statement string. The following
+values are made available through those parameters:
+
+=over 4
+
+=item B<$1>
+
+The timestamp of the queried value as a floating point number.
+
+=item B<$2>
+
+The hostname of the queried value.
+
+=item B<$3>
+
+The plugin name of the queried value.
+
+=item B<$4>
+
+The plugin instance of the queried value. This value may be B<NULL> if there
+is no plugin instance.
+
+=item B<$5>
+
+The type of the queried value (cf. L<types.db(5)>).
+
+=item B<$6>
+
+The type instance of the queried value. This value may be B<NULL> if there is
+no type instance.
+
+=item B<$7>
+
+An array of names for the submitted values (i.E<nbsp>e., the name of the data
+sources of the submitted value-list).
+
+=item B<$8>
+
+An array of types for the submitted values (i.E<nbsp>e., the type of the data
+sources of the submitted value-list; C<counter>, C<gauge>, ...). Note, that if
+B<StoreRates> is enabled (which is the default, see below), all types will be
+C<gauge>.
+
+=item B<$9>
+
+An array of the submitted values. The dimensions of the value name and value
+arrays match.
+
+=back
+
+In general, it is advisable to create and call a custom function in the
+PostgreSQL database for this purpose. Any procedural language supported by
+PostgreSQL will do (see chapter "Server Programming" in the PostgreSQL manual
+for details).
+
+=item B<StoreRates> B<false>|B<true>
+
+If set to B<true> (the default), convert counter values to rates. If set to
+B<false> counter values are stored as is, i.E<nbsp>e. as an increasing integer
+number.
+
+=back
+
The B<Database> block defines one PostgreSQL database for which to collect
statistics. It accepts a single mandatory argument which specifies the
database name. None of the other options are required. PostgreSQL will use
Specify the interval with which the database should be queried. The default is
to use the global B<Interval> setting.
+=item B<CommitInterval> I<seconds>
+
+This option may be used for database connections which have "writers" assigned
+(see above). If specified, it causes a writer to put several updates into a
+single transaction. This transaction will last for the specified amount of
+time. By default, each update will be executed in a separate transaction. Each
+transaction generates a fair amount of overhead which can, thus, be reduced by
+activating this option. The draw-back is, that data covering the specified
+amount of time will be lost, for example, if a single statement within the
+transaction fails or if the database server crashes.
+
=item B<Host> I<hostname>
Specify the hostname or IP of the PostgreSQL server to connect to. If the
Specify whether to use an SSL connection when contacting the server. The
following modes are supported:
+=item B<Instance> I<name>
+
+Specify the plugin instance name that should be used instead of the database
+name (which is the default, if this option has not been specified). This
+allows to query multiple databases of the same name on the same host (e.g.
+when running multiple database server versions in parallel).
+
=over 4
=item I<disable>
=item B<Query> I<query>
-Specify a I<query> which should be executed for the database connection. This
-may be any of the predefined or user-defined queries. If no such option is
-given, it defaults to "backends", "transactions", "queries", "query_plans",
-"table_states", "disk_io" and "disk_usage". Else, the specified queries are
-used only.
+Specifies a I<query> which should be executed in the context of the database
+connection. This may be any of the predefined or user-defined queries. If no
+such option is given, it defaults to "backends", "transactions", "queries",
+"query_plans", "table_states", "disk_io" and "disk_usage" (unless a B<Writer>
+has been specified). Else, the specified queries are used only.
+
+=item B<Writer> I<writer>
+
+Assigns the specified I<writer> backend to the database connection. This
+causes all collected data to be send to the database using the settings
+defined in the writer configuration (see the section "FILTER CONFIGURATION"
+below for details on how to selectively send data to certain plugins).
+
+Each writer will register a flush callback which may be used when having long
+transactions enabled (see the B<CommitInterval> option above). When issuing
+the B<FLUSH> command (see L<collectd-unixsock(5)> for details) the current
+transaction will be committed right away. Two different kinds of flush
+callbacks are available with the C<postgresql> plugin:
+
+=over 4
+
+=item B<postgresql>
+
+Flush all writer backends.
+
+=item B<postgresql->I<database>
+
+Flush all writers of the specified I<database> only.
+
+=back
=back
connections. Either a service name of a port number may be given. Please note
that numerical port numbers must be given as a string, too.
+=item B<Password> I<Password>
+
+Use I<Password> to authenticate when connecting to I<Redis>.
+
=item B<Timeout> I<Timeout in miliseconds>
The B<Timeout> option set the socket timeout for node response. Since the Redis
locally, or B<DataDir> is set to a relative path, this will not work as
expected. Default is B<true>.
+=item B<CreateFilesAsync> B<false>|B<true>
+
+When enabled, new RRD files are enabled asynchronously, using a separate thread
+that runs in the background. This prevents writes to block, which is a problem
+especially when many hundreds of files need to be created at once. However,
+since the purpose of creating the files asynchronously is I<not> to block until
+the file is available, values before the file is available will be discarded.
+When disabled (the default) files are created synchronously, blocking for a
+short while, while the file is being written.
+
+=item B<StepSize> I<Seconds>
+
+B<Force> the stepsize of newly created RRD-files. Ideally (and per default)
+this setting is unset and the stepsize is set to the interval in which the data
+is collected. Do not use this option unless you absolutely have to for some
+reason. Setting this option may cause problems with the C<snmp plugin>, the
+C<exec plugin> or when the daemon is set up to receive data from other hosts.
+
+=item B<HeartBeat> I<Seconds>
+
+B<Force> the heartbeat of newly created RRD-files. This setting should be unset
+in which case the heartbeat is set to twice the B<StepSize> which should equal
+the interval in which data is collected. Do not set this option unless you have
+a very good reason to do so.
+
+=item B<RRARows> I<NumRows>
+
+The C<rrdtool plugin> calculates the number of PDPs per CDP based on the
+B<StepSize>, this setting and a timespan. This plugin creates RRD-files with
+three times five RRAs, i. e. five RRAs with the CFs B<MIN>, B<AVERAGE>, and
+B<MAX>. The five RRAs are optimized for graphs covering one hour, one day, one
+week, one month, and one year.
+
+So for each timespan, it calculates how many PDPs need to be consolidated into
+one CDP by calculating:
+ number of PDPs = timespan / (stepsize * rrarows)
+
+Bottom line is, set this no smaller than the width of you graphs in pixels. The
+default is 1200.
+
+=item B<RRATimespan> I<Seconds>
+
+Adds an RRA-timespan, given in seconds. Use this option multiple times to have
+more then one RRA. If this option is never used, the built-in default of (3600,
+86400, 604800, 2678400, 31622400) is used.
+
+For more information on how RRA-sizes are calculated see B<RRARows> above.
+
+=item B<XFF> I<Factor>
+
+Set the "XFiles Factor". The default is 0.1. If unsure, don't set this option.
+I<Factor> must be in the range C<[0.0-1.0)>, i.e. between zero (inclusive) and
+one (exclusive).
+
=back
=head2 Plugin C<rrdtool>
=item B<DataDir> I<Directory>
-Set the directory to store RRD-files under. Per default RRD-files are generated
-beneath the daemon's working directory, i.E<nbsp>e. the B<BaseDir>.
+Set the directory to store RRD files under. By default RRD files are generated
+beneath the daemon's working directory, i.e. the B<BaseDir>.
+
+=item B<CreateFilesAsync> B<false>|B<true>
+
+When enabled, new RRD files are enabled asynchronously, using a separate thread
+that runs in the background. This prevents writes to block, which is a problem
+especially when many hundreds of files need to be created at once. However,
+since the purpose of creating the files asynchronously is I<not> to block until
+the file is available, values before the file is available will be discarded.
+When disabled (the default) files are created synchronously, blocking for a
+short while, while the file is being written.
=item B<StepSize> I<Seconds>
The C<rrdtool plugin> calculates the number of PDPs per CDP based on the
B<StepSize>, this setting and a timespan. This plugin creates RRD-files with
-three times five RRAs, i. e. five RRAs with the CFs B<MIN>, B<AVERAGE>, and
+three times five RRAs, i.e. five RRAs with the CFs B<MIN>, B<AVERAGE>, and
B<MAX>. The five RRAs are optimized for graphs covering one hour, one day, one
week, one month, and one year.
=item B<XFF> I<Factor>
Set the "XFiles Factor". The default is 0.1. If unsure, don't set this option.
+I<Factor> must be in the range C<[0.0-1.0)>, i.e. between zero (inclusive) and
+one (exclusive).
=item B<CacheFlush> I<Seconds>
=back
+=head2 Plugin C<sigrok>
+
+The I<sigrok plugin> uses I<libsigrok> to retrieve measurements from any device
+supported by the L<sigrok|http://sigrok.org/> project.
+
+B<Synopsis>
+
+ <Plugin sigrok>
+ LogLevel 3
+ <Device "AC Voltage">
+ Driver "fluke-dmm"
+ MinimumInterval 10
+ Conn "/dev/ttyUSB2"
+ </Device>
+ <Device "Sound Level">
+ Driver "cem-dt-885x"
+ Conn "/dev/ttyUSB1"
+ </Device>
+ </Plugin>
+
+=over 4
+
+=item B<LogLevel> B<0-5>
+
+The I<sigrok> logging level to pass on to the I<collectd> log, as a number
+between B<0> and B<5> (inclusive). These levels correspond to C<None>,
+C<Errors>, C<Warnings>, C<Informational>, C<Debug >and C<Spew>, respectively.
+The default is B<2> (C<Warnings>). The I<sigrok> log messages, regardless of
+their level, are always submitted to I<collectd> at its INFO log level.
+
+=item E<lt>B<Device> I<Name>E<gt>
+
+A sigrok-supported device, uniquely identified by this section's options. The
+I<Name> is passed to I<collectd> as the I<plugin instance>.
+
+=item B<Driver> I<DriverName>
+
+The sigrok driver to use for this device.
+
+=item B<Conn> I<ConnectionSpec>
+
+If the device cannot be auto-discovered, or more than one might be discovered
+by the driver, I<ConnectionSpec> specifies the connection string to the device.
+It can be of the form of a device path (e.g.E<nbsp>C</dev/ttyUSB2>), or, in
+case of a non-serial USB-connected device, the USB I<VendorID>B<.>I<ProductID>
+separated by a period (e.g.E<nbsp>C<0403.6001>). A USB device can also be
+specified as I<Bus>B<.>I<Address> (e.g.E<nbsp>C<1.41>).
+
+=item B<SerialComm> I<SerialSpec>
+
+For serial devices with non-standard port settings, this option can be used
+to specify them in a form understood by I<sigrok>, e.g.E<nbsp>C<9600/8n1>.
+This should not be necessary; drivers know how to communicate with devices they
+support.
+
+=item B<MinimumInterval> I<Seconds>
+
+Specifies the minimum time between measurement dispatches to I<collectd>, in
+seconds. Since some I<sigrok> supported devices can acquire measurements many
+times per second, it may be necessary to throttle these. For example, the
+I<RRD plugin> cannot process writes more than once per second.
+
+The default B<MinimumInterval> is B<0>, meaning measurements received from the
+device are always dispatched to I<collectd>. When throttled, unused
+measurements are discarded.
+
+=back
+
=head2 Plugin C<snmp>
Since the configuration of the C<snmp plugin> is a little more complicated than
This option is only available if the I<Swap plugin> can read C</proc/swaps>
(under Linux) or use the L<swapctl(2)> mechanism (under I<Solaris>).
+=item B<ReportBytes> B<false>|B<true>
+
+When enabled, the I<swap I/O> is reported in bytes. When disabled, the default,
+I<swap I/O> is reported in pages. This option is available under Linux only.
+
=back
=head2 Plugin C<syslog>
=back
+=head2 Plugin C<tail_csv>
+
+The I<tail_csv plugin> reads files in the CSV format, e.g. the statistics file
+written by I<Snort>.
+
+B<Synopsis:>
+
+ <Plugin "tail_csv">
+ <Metric "snort-dropped">
+ Type "percent"
+ Instance "dropped"
+ Index 1
+ </Metric>
+ <File "/var/log/snort/snort.stats">
+ Instance "snort-eth0"
+ Interval 600
+ Collect "snort-dropped"
+ </File>
+ </Plugin>
+
+The configuration consists of one or more B<Metric> blocks that define an index
+into the line of the CSV file and how this value is mapped to I<collectd's>
+internal representation. These are followed by one or more B<Instance> blocks
+which configure which file to read, in which interval and which metrics to
+extract.
+
+=over 4
+
+=item E<lt>B<Metric> I<Name>E<gt>
+
+The B<Metric> block configures a new metric to be extracted from the statistics
+file and how it is mapped on I<collectd's> data model. The string I<Name> is
+only used inside the B<Instance> blocks to refer to this block, so you can use
+one B<Metric> block for multiple CSV files.
+
+=over 4
+
+=item B<Type> I<Type>
+
+Configures which I<Type> to use when dispatching this metric. Types are defined
+in the L<types.db(5)> file, see the appropriate manual page for more
+information on specifying types. Only types with a single I<data source> are
+supported by the I<tail_csv plugin>. The information whether the value is an
+absolute value (i.e. a C<GAUGE>) or a rate (i.e. a C<DERIVE>) is taken from the
+I<Type's> definition.
+
+=item B<Instance> I<TypeInstance>
+
+If set, I<TypeInstance> is used to populate the type instance field of the
+created value lists. Otherwise, no type instance is used.
+
+=item B<ValueFrom> I<Index>
+
+Configure to read the value from the field with the zero-based index I<Index>.
+If the value is parsed as signed integer, unsigned integer or double depends on
+the B<Type> setting, see above.
+
+=back
+
+=item E<lt>B<File> I<Path>E<gt>
+
+Each B<File> block represents one CSV file to read. There must be at least one
+I<File> block but there can be multiple if you have multiple CSV files.
+
+=over 4
+
+=item B<Instance> I<PluginInstance>
+
+Sets the I<plugin instance> used when dispatching the values.
+
+=item B<Collect> I<Metric>
+
+Specifies which I<Metric> to collect. This option must be specified at least
+once, and you can use this option multiple times to specify more than one
+metric to be extracted from this statistic file.
+
+=item B<Interval> I<Seconds>
+
+Configures the interval in which to read values from this instance / file.
+Defaults to the plugin's default interval.
+
+=item B<TimeFrom> I<Index>
+
+Rather than using the local time when dispatching a value, read the timestamp
+from the field with the zero-based index I<Index>. The value is interpreted as
+seconds since epoch. The value is parsed as a double and may be factional.
+
+=back
+
+=back
+
=head2 Plugin C<teamspeak2>
The C<teamspeak2 plugin> connects to the query port of a teamspeak2 server and
=head2 Plugin C<varnish>
-The Varnish plugin collects information about Varnish, an HTTP accelerator.
+The I<varnish plugin> collects information about Varnish, an HTTP accelerator.
+
+Synopsis:
+
+ <Plugin "varnish">
+ <Instance "example">
+ CollectCache true
+ CollectConnections true
+ CollectBackend true
+ CollectSHM true
+ CollectESI false
+ CollectFetch false
+ CollectHCB false
+ CollectSMA false
+ CollectSMS false
+ CollectSM false
+ CollectTotals false
+ CollectWorkers false
+ </Instance>
+ </Plugin>
+
+The configuration consists of one or more E<lt>B<Instance>E<nbsp>I<Name>E<gt>
+blocks. I<Name> is the parameter passed to "varnishd -n". If left empty, it
+will collectd statistics from the default "varnishd" instance (this should work
+fine in most cases).
+
+Inside each E<lt>B<Instance>E<gt> blocks, the following options are recognized:
=over 4
Statistics about the shared memory log, a memory region to store
log messages which is flushed to disk when full. True by default.
+=item B<CollectBan> B<true>|B<false>
+
+Statistics about ban operations, such as number of bans added, retired, and
+number of objects tested against ban operations. Only available with Varnish
+3.x. False by default.
+
+=item B<CollectDirectorDNS> B<true>|B<false>
+
+DNS director lookup cache statistics. Only available with Varnish 3.x. False by
+default.
+
=item B<CollectESI> B<true>|B<false>
Edge Side Includes (ESI) parse statistics. False by default.
@@ -4810,10 +5887,27 @@ Statistics about fetches (HTTP requests sent to the backend). False by default.
Inserts and look-ups in the crit bit tree based hash. Look-ups are
divided into locked and unlocked look-ups. False by default.
+=item B<CollectObjects> B<true>|B<false>
+
+Statistics on cached objects: number of objects expired, nuked (prematurely
+expired), saved, moved, etc. False by default.
+
+=item B<CollectPurge> B<true>|B<false>
+
+Statistics about purge operations, such as number of purges added, retired, and
+number of objects tested against purge operations. Only available with Varnish
+2.x. False by default.
+
+=item B<CollectSession> B<true>|B<false>
+
+Client session statistics. Number of past and current sessions, session herd and
+linger counters, etc. False by default.
+
=item B<CollectSMA> B<true>|B<false>
-malloc or umem (umem_alloc(3MALLOC) based) storage statistics.
-The umem storage component is Solaris specific. False by default.
+malloc or umem (umem_alloc(3MALLOC) based) storage statistics. The umem storage
+component is Solaris specific. Only available with Varnish 2.x. False by
+default.
=item B<CollectSMS> B<true>|B<false>
=item B<CollectSM> B<true>|B<false>
-file (memory mapped file) storage statistics. False by default.
+file (memory mapped file) storage statistics. Only available with Varnish 2.x.
+False by default.
+
+=item B<CollectStruct> B<true>|B<false>
+
+Current varnish internal state statistics. Number of current sessions, objects
+in cache store, open connections to backends (with Varnish 2.x), etc. False by
+default.
=item B<CollectTotals> B<true>|B<false>
Collects overview counters, such as the number of sessions created,
the number of requests and bytes transferred. False by default.
+=item B<CollectUptime> B<true>|B<false>
+
+Varnish uptime. False by default.
+
+=item B<CollectVCL> B<true>|B<false>
+
+Number of total (available + discarded) VCL (config files). False by default.
+
=item B<CollectWorkers> B<true>|B<false>
Collect statistics about worker threads. False by default.
The C<write_graphite> plugin writes data to I<Graphite>, an open-source metrics
storage and graphing project. The plugin connects to I<Carbon>, the data layer
-of I<Graphite>, and sends data via the "line based" protocol (per default using
-portE<nbsp>2003). The data will be sent in blocks of at most 1428 bytes to
-minimize the number of network packets.
+of I<Graphite>, via I<TCP> or I<UDP> and sends data via the "line based"
+protocol (per default using portE<nbsp>2003). The data will be sent in blocks
+of at most 1428 bytes to minimize the number of network packets.
Synopsis:
<Plugin write_graphite>
- <Carbon>
+ <Node "example">
Host "localhost"
Port "2003"
+ Protocol "udp"
+ LogSendErrors true
Prefix "collectd"
- </Carbon>
+ </Node>
</Plugin>
+The configuration consists of one or more E<lt>B<Node>E<nbsp>I<Name>E<gt>
+blocks. Inside the B<Node> blocks, the following options are recognized:
+
=over 4
=item B<Host> I<Address>
Service name or port number to connect to. Defaults to C<2003>.
+=item B<Protocol> I<String>
+
+Protocol to use when connecting to I<Graphite>. Defaults to C<tcp>.
+
+=item B<LogSendErrors> B<false>|B<true>
+
+If set to B<true> (the default), logs errors when sending data to I<Graphite>.
+If set to B<false>, it will not log the errors. This is especially useful when
+using Protocol UDP since many times we want to use the "fire-and-forget"
+approach and logging errors fills syslog with unneeded messages.
+
=item B<Prefix> I<String>
When set, I<String> is added in front of the host name. Dots and whitespace are
B<false> counter values are stored as is, i.e. as an increasing integer
number.
+=item B<Database> I<Database>
+
+=item B<User> I<User>
+
+=item B<Password> I<Password>
+
+Sets the information used when authenticating to a I<MongoDB> database. The
+fields are optional (in which case no authentication is attempted), but if you
+want to use authentication all three fields must be set.
+
=back
=head2 Plugin C<write_http>
=back
+=head2 Plugin C<write_riemann>
+
+The I<write_riemann plugin> will send values to I<Riemann>, a powerfull stream
+aggregation and monitoring system. The plugin sends I<Protobuf> encoded data to
+I<Riemann> using UDP packets.
+
+Synopsis:
+
+ <Plugin "write_riemann">
+ <Node "example">
+ Host "localhost"
+ Port "5555"
+ Protocol UDP
+ StoreRates true
+ AlwaysAppendDS false
+ TTLFactor 2.0
+ </Node>
+ Tag "foobar"
+ </Plugin>
+
+The following options are understood by the I<write_riemann plugin>:
+
+=over 4
+
+=item E<lt>B<Node> I<Name>E<gt>
+
+The plugin's configuration consists of one or more B<Node> blocks. Each block
+is given a unique I<Name> and specifies one connection to an instance of
+I<Riemann>. Indise the B<Node> block, the following per-connection options are
+understood:
+
+=over 4
+
+=item B<Host> I<Address>
+
+Hostname or address to connect to. Defaults to C<localhost>.
+
+=item B<Port> I<Service>
+
+Service name or port number to connect to. Defaults to C<5555>.
+
+=item B<Protocol> B<UDP>|B<TCP>
+
+Specify the protocol to use when communicating with I<Riemann>. Defaults to
+B<UDP>.
+
+=item B<StoreRates> B<true>|B<false>
+
+If set to B<true> (the default), convert counter values to rates. If set to
+B<false> counter values are stored as is, i.e. as an increasing integer number.
+
+This will be reflected in the C<ds_type> tag: If B<StoreRates> is enabled,
+converted values will have "rate" appended to the data source type, e.g.
+C<ds_type:derive:rate>.
+
+=item B<AlwaysAppendDS> B<false>|B<true>
+
+If set the B<true>, append the name of the I<Data Source> (DS) to the
+"service", i.e. the field that, together with the "host" field, uniquely
+identifies a metric in I<Riemann>. If set to B<false> (the default), this is
+only done when there is more than one DS.
+
+=item B<TTLFactor> I<Factor>
+
+I<Riemann> events have a I<Time to Live> (TTL) which specifies how long each
+event is considered active. I<collectd> populates this field based on the
+metrics interval setting. This setting controls the factor with which the
+interval is multiplied to set the TTL. The default value is B<2.0>. Unless you
+know exactly what you're doing, you should only increase this setting from its
+default value.
+
+=back
+
+=item B<Tag> I<String>
+
+Add the given string as an additional tag to the metric being sent to
+I<Riemann>.
+
+=back
+
=head1 THRESHOLD CONFIGURATION
Starting with version C<4.3.0> collectd has support for B<monitoring>. By that