![[tokkee]](http://tokkee.org/images/avatar.png){kind=avatar}
diff --git a/src/collectd.conf.pod b/src/collectd.conf.pod
index 4a34fe5df3780ad76bb945be0a0ed1c926a883e7..1b73c417d9ebfc54211eefc252116d733a0b9c96 100644 (file)
--- a/src/collectd.conf.pod
+++ b/src/collectd.conf.pod
+=encoding UTF-8
+
=head1 NAME
collectd.conf - Configuration for the system statistics collection daemon B<collectd>
Include "/etc/collectd.d/*.conf"
+Starting with version 5.3, this may also be a block in which further options
+affecting the behavior of B<Include> may be specified. The following option is
+currently allowed:
+
+ <Include "/etc/collectd.d">
+ Filter "*.conf"
+ </Include>
+
+=over 4
+
+=item B<Filter> I<pattern>
+
If the C<fnmatch> function is available on your system, a shell-like wildcard
I<pattern> may be specified to filter which files to include. This may be used
in combination with recursively including a directory to easily be able to
arbitrarily mix configuration files and other documents (e.g. README files).
-The following statement is similar to the example above but includes all files
+The given example is similar to the first example above but includes all files
matching C<*.conf> in any subdirectory of C</etc/collectd.d>:
Include "/etc/collectd.d" "*.conf"
+=back
+
If more than one files are included by a single B<Include> option, the files
will be included in lexicographical order (as defined by the C<strcmp>
function). Thus, you can e.E<nbsp>g. use numbered prefixes to specify the
default value is B<5>, but you may want to increase this if you have more than
five plugins that may take relatively long to write to.
+=item B<WriteQueueLimitHigh> I<HighNum>
+
+=item B<WriteQueueLimitLow> I<LowNum>
+
+Metrics are read by the I<read threads> and then put into a queue to be handled
+by the I<write threads>. If one of the I<write plugins> is slow (e.g. network
+timeouts, I/O saturation of the disk) this queue will grow. In order to avoid
+running into memory issues in such a case, you can limit the size of this
+queue.
+
+By default, there is no limit and memory may grow indefinitely. This is most
+likely not an issue for clients, i.e. instances that only handle the local
+metrics. For servers it is recommended to set this to a non-zero value, though.
+
+You can set the limits using B<WriteQueueLimitHigh> and B<WriteQueueLimitLow>.
+Each of them takes a numerical argument which is the number of metrics in the
+queue. If there are I<HighNum> metrics in the queue, any new metrics I<will> be
+dropped. If there are less than I<LowNum> metrics in the queue, all new metrics
+I<will> be enqueued. If the number of metrics currently in the queue is between
+I<LowNum> and I<HighNum>, the metric is dropped with a probability that is
+proportional to the number of metrics in the queue (i.e. it increases linearly
+until it reaches 100%.)
+
+If B<WriteQueueLimitHigh> is set to non-zero and B<WriteQueueLimitLow> is
+unset, the latter will default to half of B<WriteQueueLimitHigh>.
+
+If you do not want to randomly drop values when the queue size is between
+I<LowNum> and I<HighNum>, set If B<WriteQueueLimitHigh> and
+B<WriteQueueLimitLow> to same value.
+
=item B<Hostname> I<Name>
Sets the hostname that identifies a host. If you omit this setting, the
many small files are stored on the disk. This is a usual scenario for mail
transfer agents and web caches.
-=item B<ReportPercentage> B<false>|B<true>
+=item B<ValuesAbsolute> B<true>|B<false>
-Enables or disables reporting of disk space and inodes as a percentage.
-Defaults to B<false>.
+Enables or disables reporting of free, used and used disk space in 1K-blocks.
+Defaults to true.
-This is useful for deploying I<collectd> on the cloud, where machines with
-different disk size may exist. Then it is more practical to configure
-thresholds based on relative disk size.
+=item B<ValuesPercentage> B<true>|B<false>
+
+Enables or disables reporting of free, used and used disk space in percentage.
+Defaults to false.
+
+This is useful for deploying collectd on the cloud, where machines with
+different disk size may exist. Then it is more practical to configure thresholds
+based on relative disk size.
=back
=back
+=head2 Plugin C<sigrok>
+
+The I<sigrok plugin> uses I<libsigrok> to retrieve measurements from any device
+supported by the L<sigrok|http://sigrok.org/> project.
+
+B<Synopsis>
+
+ <Plugin sigrok>
+ LogLevel 3
+ <Device "AC Voltage">
+ Driver "fluke-dmm"
+ MinimumInterval 10
+ Conn "/dev/ttyUSB2"
+ </Device>
+ <Device "Sound Level">
+ Driver "cem-dt-885x"
+ Conn "/dev/ttyUSB1"
+ </Device>
+ </Plugin>
+
+=over 4
+
+=item B<LogLevel> B<0-5>
+
+The I<sigrok> logging level to pass on to the I<collectd> log, as a number
+between B<0> and B<5> (inclusive). These levels correspond to C<None>,
+C<Errors>, C<Warnings>, C<Informational>, C<Debug >and C<Spew>, respectively.
+The default is B<2> (C<Warnings>). The I<sigrok> log messages, regardless of
+their level, are always submitted to I<collectd> at its INFO log level.
+
+=item E<lt>B<Device> I<Name>E<gt>
+
+A sigrok-supported device, uniquely identified by this section's options. The
+I<Name> is passed to I<collectd> as the I<plugin instance>.
+
+=item B<Driver> I<DriverName>
+
+The sigrok driver to use for this device.
+
+=item B<Conn> I<ConnectionSpec>
+
+If the device cannot be auto-discovered, or more than one might be discovered
+by the driver, I<ConnectionSpec> specifies the connection string to the device.
+It can be of the form of a device path (e.g.E<nbsp>C</dev/ttyUSB2>), or, in
+case of a non-serial USB-connected device, the USB I<VendorID>B<.>I<ProductID>
+separated by a period (e.g.E<nbsp>C<0403.6001>). A USB device can also be
+specified as I<Bus>B<.>I<Address> (e.g.E<nbsp>C<1.41>).
+
+=item B<SerialComm> I<SerialSpec>
+
+For serial devices with non-standard port settings, this option can be used
+to specify them in a form understood by I<sigrok>, e.g.E<nbsp>C<9600/8n1>.
+This should not be necessary; drivers know how to communicate with devices they
+support.
+
+=item B<MinimumInterval> I<Seconds>
+
+Specifies the minimum time between measurement dispatches to I<collectd>, in
+seconds. Since some I<sigrok> supported devices can acquire measurements many
+times per second, it may be necessary to throttle these. For example, the
+I<RRD plugin> cannot process writes more than once per second.
+
+The default B<MinimumInterval> is B<0>, meaning measurements received from the
+device are always dispatched to I<collectd>. When throttled, unused
+measurements are discarded.
+
+=back
+
=head2 Plugin C<snmp>
Since the configuration of the C<snmp plugin> is a little more complicated than
=head2 Plugin C<varnish>
-The Varnish plugin collects information about Varnish, an HTTP accelerator.
+The I<varnish plugin> collects information about Varnish, an HTTP accelerator.
+
+Synopsis:
+
+ <Plugin "varnish">
+ <Instance "example">
+ CollectCache true
+ CollectConnections true
+ CollectBackend true
+ CollectSHM true
+ CollectESI false
+ CollectFetch false
+ CollectHCB false
+ CollectSMA false
+ CollectSMS false
+ CollectSM false
+ CollectTotals false
+ CollectWorkers false
+ </Instance>
+ </Plugin>
+
+The configuration consists of one or more E<lt>B<Instance>E<nbsp>I<Name>E<gt>
+blocks. I<Name> is the parameter passed to "varnishd -n". If left empty, it
+will collectd statistics from the default "varnishd" instance (this should work
+fine in most cases).
+
+Inside each E<lt>B<Instance>E<gt> blocks, the following options are recognized:
=over 4
The C<write_graphite> plugin writes data to I<Graphite>, an open-source metrics
storage and graphing project. The plugin connects to I<Carbon>, the data layer
-of I<Graphite>, and sends data via the "line based" protocol (per default using
-portE<nbsp>2003). The data will be sent in blocks of at most 1428 bytes to
-minimize the number of network packets.
+of I<Graphite>, via I<TCP> or I<UDP> and sends data via the "line based"
+protocol (per default using portE<nbsp>2003). The data will be sent in blocks
+of at most 1428 bytes to minimize the number of network packets.
Synopsis:
<Node "example">
Host "localhost"
Port "2003"
+ Protocol "udp"
+ LogSendErrors true
Prefix "collectd"
</Node>
</Plugin>
Service name or port number to connect to. Defaults to C<2003>.
+=item B<Protocol> I<String>
+
+Protocol to use when connecting to I<Graphite>. Defaults to C<tcp>.
+
+=item B<LogSendErrors> B<false>|B<true>
+
+If set to B<true> (the default), logs errors when sending data to I<Graphite>.
+If set to B<false>, it will not log the errors. This is especially useful when
+using Protocol UDP since many times we want to use the "fire-and-forget"
+approach and logging errors fills syslog with unneeded messages.
+
=item B<Prefix> I<String>
When set, I<String> is added in front of the host name. Dots and whitespace are