From cf7bb589af739563c90dc32b4901bea73aaaa9d0 Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Fri, 10 Feb 2006 00:45:59 -0800 Subject: [PATCH] git-status -v This revamps the git-status command to take the same set of parameters as git commit. It gives a preview of what is being committed with that command. With -v flag, it shows the diff output between the HEAD commit and the index that would be committed if these flags were given to git-commit command. git-commit also acquires -v flag (it used to mean "verify" but that is the default anyway and there is --no-verify to turn it off, so not much is lost), which uses the updated git-status -v to seed the commit log buffer. This is handy for writing a log message while reviewing the changes one last time. Now, git-commit and git-status are internally share the same implementation. Unlike previous git-commit change, this uses a temporary index to prepare the index file that would become the real index file after a successful commit, and moves it to the real index file once the commit is actually made. This makes it safer than the previous scheme, which stashed away the original index file and restored it after an aborted commit. Signed-off-by: Junio C Hamano --- Makefile | 7 +- git-commit.sh | 310 ++++++++++++++++++++++++++++++++++++++++---------- git-status.sh | 115 ------------------- 3 files changed, 255 insertions(+), 177 deletions(-) delete mode 100755 git-status.sh diff --git a/Makefile b/Makefile index 5c329346e..f240e452b 100644 --- a/Makefile +++ b/Makefile @@ -107,7 +107,7 @@ SCRIPT_SH = \ git-merge-one-file.sh git-parse-remote.sh \ git-prune.sh git-pull.sh git-push.sh git-rebase.sh \ git-repack.sh git-request-pull.sh git-reset.sh \ - git-resolve.sh git-revert.sh git-sh-setup.sh git-status.sh \ + git-resolve.sh git-revert.sh git-sh-setup.sh \ git-tag.sh git-verify-tag.sh git-whatchanged.sh \ git-applymbox.sh git-applypatch.sh git-am.sh \ git-merge.sh git-merge-stupid.sh git-merge-octopus.sh \ @@ -125,7 +125,7 @@ SCRIPT_PYTHON = \ SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH)) \ $(patsubst %.perl,%,$(SCRIPT_PERL)) \ $(patsubst %.py,%,$(SCRIPT_PYTHON)) \ - git-cherry-pick git-show + git-cherry-pick git-show git-status # The ones that do not have to link with lcrypto nor lz. SIMPLE_PROGRAMS = \ @@ -443,6 +443,9 @@ git-cherry-pick: git-revert git-show: git-whatchanged cp $< $@ +git-status: git-commit + cp $< $@ + # These can record GIT_VERSION git$X git.spec \ $(patsubst %.sh,%,$(SCRIPT_SH)) \ diff --git a/git-commit.sh b/git-commit.sh index 25389240b..e6793bd67 100755 --- a/git-commit.sh +++ b/git-commit.sh @@ -3,13 +3,21 @@ # Copyright (c) 2005 Linus Torvalds # Copyright (c) 2006 Junio C Hamano -USAGE='[-a] [-i] [-s] [-v | --no-verify] [-m | -F | (-C|-c) ] [-e] [--author ] [...]' - +USAGE='[-a] [-i] [-s] [-v] [--no-verify] [-m | -F | (-C|-c) ] [-e] [--author ] [...]' SUBDIRECTORY_OK=Yes . git-sh-setup -git-rev-parse --verify HEAD >/dev/null 2>&1 || -initial_commit=t +git-rev-parse --verify HEAD >/dev/null 2>&1 || initial_commit=t +branch=$(GIT_DIR="$GIT_DIR" git-symbolic-ref HEAD) + +case "$0" in +*status) + status_only=t + unmerged_ok_if_status=--unmerged ;; +*commit) + status_only= + unmerged_ok_if_status= ;; +esac refuse_partial () { echo >&2 "$1" @@ -17,23 +25,155 @@ refuse_partial () { exit 1 } -SAVE_INDEX="$GIT_DIR/save-index$$" +THIS_INDEX="$GIT_DIR/index" +NEXT_INDEX="$GIT_DIR/next-index$$" +rm -f "$NEXT_INDEX" save_index () { - cp "$GIT_DIR/index" "$SAVE_INDEX" + cp "$THIS_INDEX" "$NEXT_INDEX" +} + +report () { + header="# +# $1: +# ($2) +# +" + trailer="" + while read status name newname + do + printf '%s' "$header" + header="" + trailer="# +" + case "$status" in + M ) echo "# modified: $name";; + D*) echo "# deleted: $name";; + T ) echo "# typechange: $name";; + C*) echo "# copied: $name -> $newname";; + R*) echo "# renamed: $name -> $newname";; + A*) echo "# new file: $name";; + U ) echo "# unmerged: $name";; + esac + done + printf '%s' "$trailer" + [ "$header" ] } run_status () { - ( - cd "$TOP" - if test '' != "$TMP_INDEX" + ( + # We always show status for the whole tree. + cd "$TOP" + + # If TMP_INDEX is defined, that means we are doing + # "--only" partial commit, and that index file is used + # to build the tree for the commit. Otherwise, if + # NEXT_INDEX exists, that is the index file used to + # make the commit. Otherwise we are using as-is commit + # so the regular index file is what we use to compare. + if test '' != "$TMP_INDEX" + then + GIT_INDEX_FILE="$TMP_INDEX" + export GIT_INDEX_FILE + elif test -f "$NEXT_INDEX" + then + GIT_INDEX_FILE="$NEXT_INDEX" + export GIT_INDEX_FILE + fi + + case "$branch" in + refs/heads/master) ;; + *) echo "# On branch $branch" ;; + esac + + if test -z "$initial_commit" + then + if test -z "$verbose" + then + git-diff-index -M --cached --name-status \ + --diff-filter=MDTCRA HEAD | + sed -e ' + s/\\/\\\\/g + s/ /\\ /g + ' | + report "Updated but not checked in" "will commit" + else + if git-diff-index --cached -M -p --diff-filter=MDTCRA HEAD | + grep . then - GIT_INDEX_FILE="$TMP_INDEX" git-status + false else - git-status + true fi - ) + fi + committable="$?" + else + echo '# +# Initial commit +#' + git-ls-files | + sed -e ' + s/\\/\\\\/g + s/ /\\ /g + s/^/A / + ' | + report "Updated but not checked in" "will commit" + + committable="$?" + fi + + git-diff-files --name-status | + sed -e ' + s/\\/\\\\/g + s/ /\\ /g + ' | + report "Changed but not updated" \ + "use git-update-index to mark for commit" + + if test -f "$GIT_DIR/info/exclude" + then + git-ls-files -z --others --directory \ + --exclude-from="$GIT_DIR/info/exclude" \ + --exclude-per-directory=.gitignore + else + git-ls-files -z --others --directory \ + --exclude-per-directory=.gitignore + fi | + perl -e '$/ = "\0"; + my $shown = 0; + while (<>) { + chomp; + s|\\|\\\\|g; + s|\t|\\t|g; + s|\n|\\n|g; + s/^/# /; + if (!$shown) { + print "#\n# Untracked files:\n"; + print "# (use \"git add\" to add to commit)\n"; + print "#\n"; + $shown = 1; + } + print "$_\n"; + } + ' + case "$committable" in + 0) + echo "nothing to commit" + exit 1 + esac + exit 0 + ) } +trap ' + test -z "$TMP_INDEX" || { + test -f "$TMP_INDEX" && rm -f "$TMP_INDEX" + } + rm -f "$NEXT_INDEX" +' 0 + +################################################################ +# Command line argument parsing and sanity checking + all= also= only= @@ -43,6 +183,7 @@ no_edit= log_given= log_message= verify=t +verbose= signoff= force_author= while case "$#" in 0) break;; esac @@ -172,9 +313,9 @@ do signoff=t shift ;; - -v|--v|--ve|--ver|--veri|--verif|--verify) - verify=t - shift + -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose) + verbose=t + shift ;; --) shift @@ -189,6 +330,9 @@ do esac done +################################################################ +# Sanity check options + case "$log_given" in tt*) die "Only one of -c/-C/-F/-m can be used." ;; @@ -207,9 +351,24 @@ case "$#,$also$only" in # Later when switch the defaults, we will replace them with these: # echo >&2 "assuming --only paths..." # also= + + # If we are going to launch an editor, the message won't be + # shown without this... + test -z "$log_given$status_only" && sleep 1 ;; esac unset only +case "$all,$also,$#" in +t,t,*) + die "Cannot use -a and -i at the same time." ;; +t,,[1-9]*) + die "Paths with -a does not make sense." ;; +,t,0) + die "No paths with -i does not make sense." ;; +esac + +################################################################ +# Prepare index to have a tree to be committed TOP=`git-rev-parse --show-cdup` if test -z "$TOP" @@ -218,29 +377,25 @@ then fi case "$all,$also" in -t,t) - die "Cannot use -a and -i at the same time." ;; t,) - case "$#" in - 0) ;; - *) die "Paths with -a does not make sense." ;; - esac - save_index && ( cd "$TOP" + GIT_INDEX_FILE="$NEXT_INDEX" + export GIT_INDEX_FILE git-diff-files --name-only -z | git-update-index --remove -z --stdin ) ;; ,t) - case "$#" in - 0) die "No paths with -i does not make sense." ;; - esac - save_index && git-diff-files --name-only -z -- "$@" | - (cd "$TOP" && git-update-index --remove -z --stdin) + ( + cd "$TOP" + GIT_INDEX_FILE="$NEXT_INDEX" + export GIT_INDEX_FILE + git-update-index --remove -z --stdin + ) ;; ,) case "$#" in @@ -262,43 +417,68 @@ t,) refuse_partial "Different in index and the last commit: $dirty_in_index" fi - commit_only=`git-ls-files -- "$@"` ;; + commit_only=`git-ls-files -- "$@"` + + # Build the temporary index and update the real index + # the same way. + if test -z "$initial_commit" + then + cp "$THIS_INDEX" "$TMP_INDEX" + GIT_INDEX_FILE="$TMP_INDEX" git-read-tree -m HEAD + else + rm -f "$TMP_INDEX" + fi || exit + + echo "$commit_only" | + GIT_INDEX_FILE="$TMP_INDEX" \ + git-update-index --add --remove --stdin && + + save_index && + echo "$commit_only" | + ( + GIT_INDEX_FILE="$NEXT_INDEX" + export GIT_INDEX_FILE + git-update-index --remove --stdin + ) || exit + ;; esac ;; esac -git-update-index -q --refresh || exit 1 - -trap ' - test -z "$TMP_INDEX" || { - test -f "$TMP_INDEX" && rm -f "$TMP_INDEX" - } - test -f "$SAVE_INDEX" && mv -f "$SAVE_INDEX" "$GIT_DIR/index" -' 0 +################################################################ +# If we do as-is commit, the index file will be THIS_INDEX, +# otherwise NEXT_INDEX after we make this commit. We leave +# the index as is if we abort. -if test "$TMP_INDEX" +if test -f "$NEXT_INDEX" then - if test -z "$initial_commit" - then - GIT_INDEX_FILE="$TMP_INDEX" git-read-tree HEAD - else - rm -f "$TMP_INDEX" - fi || exit - echo "$commit_only" | - GIT_INDEX_FILE="$TMP_INDEX" git-update-index --add --remove --stdin && - save_index && - echo "$commit_only" | - git-update-index --remove --stdin || - exit + USE_INDEX="$NEXT_INDEX" +else + USE_INDEX="$THIS_INDEX" fi +GIT_INDEX_FILE="$USE_INDEX" \ + git-update-index -q $unmerged_ok_if_status --refresh || exit + +################################################################ +# If the request is status, just show it and exit. + +case "$0" in +*status) + run_status + exit $? +esac + +################################################################ +# Grab commit message, write out tree and make commit. + if test t = "$verify" && test -x "$GIT_DIR"/hooks/pre-commit then if test "$TMP_INDEX" then GIT_INDEX_FILE="$TMP_INDEX" "$GIT_DIR"/hooks/pre-commit else - "$GIT_DIR"/hooks/pre-commit + GIT_INDEX_FILE="$USE_INDEX" "$GIT_DIR"/hooks/pre-commit fi || exit fi @@ -398,8 +578,10 @@ else PARENTS="" fi - -run_status >>"$GIT_DIR"/COMMIT_EDITMSG +{ + test -z "$verbose" || echo '---' + run_status +} >>"$GIT_DIR"/COMMIT_EDITMSG if [ "$?" != "0" -a ! -f "$GIT_DIR/MERGE_HEAD" ] then rm -f "$GIT_DIR/COMMIT_EDITMSG" @@ -429,8 +611,14 @@ t) fi esac -grep -v '^#' < "$GIT_DIR"/COMMIT_EDITMSG | -git-stripspace > "$GIT_DIR"/COMMIT_MSG +sed -e ' + /^---$/{ + s/// + q + } + /^#/d +' "$GIT_DIR"/COMMIT_EDITMSG | +git-stripspace >"$GIT_DIR"/COMMIT_MSG if cnt=`grep -v -i '^Signed-off-by' "$GIT_DIR"/COMMIT_MSG | git-stripspace | @@ -439,14 +627,20 @@ if cnt=`grep -v -i '^Signed-off-by' "$GIT_DIR"/COMMIT_MSG | then if test -z "$TMP_INDEX" then - tree=$(git-write-tree) + tree=$(GIT_INDEX_FILE="$USE_INDEX" git-write-tree) else tree=$(GIT_INDEX_FILE="$TMP_INDEX" git-write-tree) && rm -f "$TMP_INDEX" fi && commit=$(cat "$GIT_DIR"/COMMIT_MSG | git-commit-tree $tree $PARENTS) && git-update-ref HEAD $commit $current && - rm -f -- "$GIT_DIR/MERGE_HEAD" + rm -f -- "$GIT_DIR/MERGE_HEAD" && + if test -f "$NEXT_INDEX" + then + mv "$NEXT_INDEX" "$THIS_INDEX" + else + : ;# happy + fi else echo >&2 "* no commit message? aborting commit." false @@ -459,8 +653,4 @@ if test -x "$GIT_DIR"/hooks/post-commit && test "$ret" = 0 then "$GIT_DIR"/hooks/post-commit fi -if test 0 -eq "$ret" -then - rm -f "$SAVE_INDEX" -fi exit "$ret" diff --git a/git-status.sh b/git-status.sh deleted file mode 100755 index 10d781c92..000000000 --- a/git-status.sh +++ /dev/null @@ -1,115 +0,0 @@ -#!/bin/sh -# -# Copyright (c) 2005 Linus Torvalds -# - -USAGE='' -SUBDIRECTORY_OK='Yes' - -. git-sh-setup - -if [ "$#" != "0" ] -then - usage -fi - -report () { - header="# -# $1: -# ($2) -# -" - trailer="" - while read status name newname - do - printf '%s' "$header" - header="" - trailer="# -" - case "$status" in - M ) echo "# modified: $name";; - D*) echo "# deleted: $name";; - T ) echo "# typechange: $name";; - C*) echo "# copied: $name -> $newname";; - R*) echo "# renamed: $name -> $newname";; - A*) echo "# new file: $name";; - U ) echo "# unmerged: $name";; - esac - done - printf '%s' "$trailer" - [ "$header" ] -} - -branch=$(GIT_DIR="$GIT_DIR" git-symbolic-ref HEAD) -case "$branch" in -refs/heads/master) ;; -*) echo "# On branch $branch" ;; -esac - -git-update-index -q --unmerged --refresh || exit - -if GIT_DIR="$GIT_DIR" git-rev-parse --verify HEAD >/dev/null 2>&1 -then - git-diff-index -M --cached --name-status --diff-filter=MDTCRA HEAD | - sed -e ' - s/\\/\\\\/g - s/ /\\ /g - ' | - report "Updated but not checked in" "will commit" - - committable="$?" -else - echo '# -# Initial commit -#' - git-ls-files | - sed -e ' - s/\\/\\\\/g - s/ /\\ /g - s/^/A / - ' | - report "Updated but not checked in" "will commit" - - committable="$?" -fi - -git-diff-files --name-status | -sed -e ' - s/\\/\\\\/g - s/ /\\ /g -' | -report "Changed but not updated" "use git-update-index to mark for commit" - - -if test -f "$GIT_DIR/info/exclude" -then - git-ls-files -z --others --directory \ - --exclude-from="$GIT_DIR/info/exclude" \ - --exclude-per-directory=.gitignore -else - git-ls-files -z --others --directory \ - --exclude-per-directory=.gitignore -fi | -perl -e '$/ = "\0"; - my $shown = 0; - while (<>) { - chomp; - s|\\|\\\\|g; - s|\t|\\t|g; - s|\n|\\n|g; - s/^/# /; - if (!$shown) { - print "#\n# Untracked files:\n"; - print "# (use \"git add\" to add to commit)\n#\n"; - $shown = 1; - } - print "$_\n"; - } -' - -case "$committable" in -0) - echo "nothing to commit" - exit 1 -esac -exit 0 -- 2.30.2