From 8389b52b2a51d5b110b508cc67f0f41f99c30d3f Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Sat, 28 Jan 2006 23:15:24 -0800 Subject: [PATCH] git-rerere: reuse recorded resolve. In a workflow that employs relatively long lived topic branches, the developer sometimes needs to resolve the same conflict over and over again until the topic branches are done (either merged to the "release" branch, or sent out and accepted upstream). This commit introduces a new command, "git rerere", to help this process by recording the conflicted automerge results and corresponding hand-resolve results on the initial manual merge, and later by noticing the same conflicted automerge and applying the previously recorded hand resolution using three-way merge. Signed-off-by: Junio C Hamano --- Documentation/git-rerere.txt | 177 +++++++++++++++++++++++++++ Documentation/git.txt | 3 + Makefile | 2 +- git-am.sh | 1 + git-commit.sh | 1 + git-merge.sh | 1 + git-rerere.perl | 223 +++++++++++++++++++++++++++++++++++ git-reset.sh | 2 +- 8 files changed, 408 insertions(+), 2 deletions(-) create mode 100644 Documentation/git-rerere.txt create mode 100755 git-rerere.perl diff --git a/Documentation/git-rerere.txt b/Documentation/git-rerere.txt new file mode 100644 index 000000000..8b6b65123 --- /dev/null +++ b/Documentation/git-rerere.txt @@ -0,0 +1,177 @@ +git-rerere(1) +============= + +NAME +---- +git-rerere - Reuse recorded resolve + +SYNOPSIS +-------- +'git-rerere' + + +DESCRIPTION +----------- + +In a workflow that employs relatively long lived topic branches, +the developer sometimes needs to resolve the same conflict over +and over again until the topic branches are done (either merged +to the "release" branch, or sent out and accepted upstream). + +This command helps this process by recording conflicted +automerge results and corresponding hand-resolve results on the +initial manual merge, and later by noticing the same automerge +results and applying the previously recorded hand resolution. + +[NOTE] +You need to create `$GIT_DIR/rr-cache` directory to enable this +command. + +DISCUSSION +---------- + +When your topic branch modifies overlapping area that your +master branch (or upstream) touched since your topic branch +forked from it, you may want to test it with the latest master, +even before your topic branch is ready to be pushed upstream: + +------------ + o---*---o topic + / + o---o---o---*---o---o master +------------ + +For such a test, you need to merge master and topic somehow. +One way to do it is to pull master into the topic branch: + +------------ + $ git checkout topic + $ git pull . master + + o---*---o---+ topic + / / + o---o---o---*---o---o master +------------ + +The commits marked with `*` touch the same area in the same +file; you need to resolve the conflicts when creating the commit +marked with `+`. Then you can test the result to make sure your +work-in-progress still works with what is in the latest master. + +After this test merge, there are two ways to continue your work +on the topic. The easiest is to build on top of the test merge +commit `+`, and when your work in the topic branch is finally +ready, pull the topic branch into master, and/or ask the +upstream to pull from you. By that time, however, the master or +the upstream might have been advanced since the test merge `+`, +in which case the final commit graph would look like this: + +------------ + $ git checkout topic + $ git pull . master + $ ... work on both topic and master branches + $ git checkout master + $ git pull . topic + + o---*---o---+---o---o topic + / / \ + o---o---o---*---o---o---o---o---+ master +------------ + +When your topic branch is long-lived, however, your topic branch +would end up having many such "Merge from master" commits on it, +which would unnecessarily clutter the development history. +Readers of the Linux kernel mailing list may remember that Linus +complained about such too frequent test merges when a subsystem +maintainer asked to pull from a branch full of "useless merges". + +As an alternative, to keep the topic branch clean of test +merges, you could blow away the test merge, and keep building on +top of the tip before the test merge: + +------------ + $ git checkout topic + $ git pull . master + $ git reset --hard HEAD^ ;# rewind the test merge + $ ... work on both topic and master branches + $ git checkout master + $ git pull . topic + + o---*---o-------o---o topic + / \ + o---o---o---*---o---o---o---o---+ master +------------ + +This would leave only one merge commit when your topic branch is +finally ready and merged into the master branch. This merge +would require you to resolve the conflict, introduced by the +commits marked with `*`. However, often this conflict is the +same conflict you resolved when you created the test merge you +blew away. `git-rerere` command helps you to resolve this final +conflicted merge using the information from your earlier hand +resolve. + +Running `git-rerere` command immediately after a conflicted +automerge records the conflicted working tree files, with the +usual conflict markers `<<<<<<<`, `=======`, and `>>>>>>>` in +them. Later, after you are done resolving the conflicts, +running `git-rerere` again records the resolved state of these +files. Suppose you did this when you created the test merge of +master into the topic branch. + +Next time, running `git-rerere` after seeing a conflicted +automerge, if the conflict is the same as the earlier one +recorded, it is noticed and a three-way merge between the +earlier conflicted automerge, the earlier manual resolution, and +the current conflicted automerge is performed by the command. +If this three-way merge resolves cleanly, the result is written +out to your working tree file, so you would not have to manually +resolve it. Note that `git-rerere` leaves the index file alone, +so you still need to do the final sanity checks with `git diff` +(or `git diff -c`) and `git update-index` when you are +satisfied. + +As a convenience measure, `git-merge` automatically invokes +`git-rerere` when it exits with a failed automerge, which +records it if it is a new conflict, or reuses the earlier hand +resolve when it is not. `git-commit` also invokes `git-rerere` +when recording a merge result. What this means is that you do +not have to do anything special yourself (Note: you still have +to create `$GIT_DIR/rr-cache` directory to enable this command). + +In our example, when you did the test merge, the manual +resolution is recorded, and it will be reused when you do the +actual merge later with updated master and topic branch, as long +as the earlier resolution is still applicable. + +The information `git-rerere` records is also used when running +`git-rebase`. After blowing away the test merge and continuing +development on the topic branch: + +------------ + o---*---o-------o---o topic + / + o---o---o---*---o---o---o---o master + + $ git rebase master topic + + o---*---o-------o---o topic + / + o---o---o---*---o---o---o---o master +------------ + +you could run `git rebase master topic`, to keep yourself +up-to-date even before your topic is ready to be sent upstream. +This would result in falling back to three-way merge, and it +would conflict the same way the test merge you resolved earlier. +`git-rerere` is run by `git rebase` to help you resolve this +conflict. + + +Author +------ +Written by Junio C Hamano + +GIT +--- +Part of the gitlink:git[7] suite diff --git a/Documentation/git.txt b/Documentation/git.txt index e8ef3efa8..2d0ca9d8e 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -313,6 +313,9 @@ gitlink:git-rebase[1]:: gitlink:git-repack[1]:: Pack unpacked objects in a repository. +gitlink:git-rerere[1]:: + Reuse recorded resolution of conflicted merges. + gitlink:git-reset[1]:: Reset current HEAD to the specified state. diff --git a/Makefile b/Makefile index dfd765115..5c329346e 100644 --- a/Makefile +++ b/Makefile @@ -116,7 +116,7 @@ SCRIPT_SH = \ SCRIPT_PERL = \ git-archimport.perl git-cvsimport.perl git-relink.perl \ - git-shortlog.perl git-fmt-merge-msg.perl \ + git-shortlog.perl git-fmt-merge-msg.perl git-rerere.perl \ git-svnimport.perl git-mv.perl git-cvsexportcommit.perl SCRIPT_PYTHON = \ diff --git a/git-am.sh b/git-am.sh index 731ab1fff..ee6886f30 100755 --- a/git-am.sh +++ b/git-am.sh @@ -88,6 +88,7 @@ fall_back_3way () { # saying that we reverted all those changes. git-merge-resolve $orig_tree -- HEAD $his_tree || { + git-rerere echo Failed to merge in the changes. exit 1 } diff --git a/git-commit.sh b/git-commit.sh index 10946ed5f..9c9408375 100755 --- a/git-commit.sh +++ b/git-commit.sh @@ -245,6 +245,7 @@ else fi ret="$?" rm -f "$GIT_DIR/COMMIT_MSG" "$GIT_DIR/COMMIT_EDITMSG" +git-rerere if test -x "$GIT_DIR"/hooks/post-commit && test "$ret" = 0 then diff --git a/git-merge.sh b/git-merge.sh index 8c0a92c14..dc17baf6e 100755 --- a/git-merge.sh +++ b/git-merge.sh @@ -309,5 +309,6 @@ Conflicts: sed -e 's/^[^ ]* / /' | uniq } >>"$GIT_DIR/MERGE_MSG" + git rerere die "Automatic merge failed; fix up by hand" fi diff --git a/git-rerere.perl b/git-rerere.perl new file mode 100755 index 000000000..df119517f --- /dev/null +++ b/git-rerere.perl @@ -0,0 +1,223 @@ +#!/usr/bin/perl +# +# REuse REcorded REsolve. This tool records a conflicted automerge +# result and its hand resolution, and helps to resolve future +# automerge that results in the same conflict. +# +# To enable this feature, create a directory 'rr-cache' under your +# .git/ directory. + +use Digest; +use File::Path; +use File::Copy; + +my $git_dir = $::ENV{GIT_DIR} || ".git"; +my $rr_dir = "$git_dir/rr-cache"; +my $merge_rr = "$git_dir/rr-cache/MERGE_RR"; + +my %merge_rr = (); + +sub read_rr { + if (!-f $merge_rr) { + %merge_rr = (); + return; + } + my $in; + local $/ = "\0"; + open $in, "<$merge_rr" or die "$!: $merge_rr"; + while (<$in>) { + chomp; + my ($name, $path) = /^([0-9a-f]{40})\t(.*)$/s; + $merge_rr{$path} = $name; + } + close $in; +} + +sub write_rr { + my $out; + open $out, ">$merge_rr" or die "$!: $merge_rr"; + for my $path (sort keys %merge_rr) { + my $name = $merge_rr{$path}; + print $out "$name\t$path\0"; + } + close $out; +} + +sub compute_conflict_name { + my ($path) = @_; + my @side = (); + my $in; + open $in, "<$path" or die "$!: $path"; + + my $sha1 = Digest->new("SHA-1"); + my $hunk = 0; + while (<$in>) { + if (/^<<<<<<< .*/) { + $hunk++; + @side = ([], undef); + } + elsif (/^=======$/) { + $side[1] = []; + } + elsif (/^>>>>>>> .*/) { + my ($one, $two); + $one = join('', @{$side[0]}); + $two = join('', @{$side[1]}); + if ($two le $one) { + ($one, $two) = ($two, $one); + } + $sha1->add($one); + $sha1->add("\0"); + $sha1->add($two); + $sha1->add("\0"); + @side = (); + } + elsif (@side == 0) { + next; + } + elsif (defined $side[1]) { + push @{$side[1]}, $_; + } + else { + push @{$side[0]}, $_; + } + } + close $in; + return ($sha1->hexdigest, $hunk); +} + +sub record_preimage { + my ($path, $name) = @_; + my @side = (); + my ($in, $out); + open $in, "<$path" or die "$!: $path"; + open $out, ">$name" or die "$!: $name"; + + while (<$in>) { + if (/^<<<<<<< .*/) { + @side = ([], undef); + } + elsif (/^=======$/) { + $side[1] = []; + } + elsif (/^>>>>>>> .*/) { + my ($one, $two); + $one = join('', @{$side[0]}); + $two = join('', @{$side[1]}); + if ($two le $one) { + ($one, $two) = ($two, $one); + } + print $out "<<<<<<<\n"; + print $out $one; + print $out "=======\n"; + print $out $two; + print $out ">>>>>>>\n"; + @side = (); + } + elsif (@side == 0) { + print $out $_; + } + elsif (defined $side[1]) { + push @{$side[1]}, $_; + } + else { + push @{$side[0]}, $_; + } + } + close $out; + close $in; +} + +sub find_conflict { + my $in; + local $/ = "\0"; + open $in, '-|', qw(git ls-files -z -u) or die "$!: ls-files"; + my %path = (); + my @path = (); + while (<$in>) { + chomp; + my ($mode, $sha1, $stage, $path) = + /^([0-7]+) ([0-9a-f]{40}) ([123])\t(.*)$/s; + $path{$path} |= (1 << $stage); + } + close $in; + while (my ($path, $status) = each %path) { + if ($status == 14) { push @path, $path; } + } + return @path; +} + +sub merge { + my ($name, $path) = @_; + record_preimage($path, "$rr_dir/$name/thisimage"); + unless (system('merge', map { "$rr_dir/$name/${_}image" } + qw(this pre post))) { + my $in; + open $in, "<$rr_dir/$name/thisimage" or + die "$!: $name/thisimage"; + my $out; + open $out, ">$path" or die "$!: $path"; + while (<$in>) { print $out $_; } + close $in; + close $out; + return 1; + } + return 0; +} + +-d "$rr_dir" || exit(0); + +read_rr(); +my %conflict = map { $_ => 1 } find_conflict(); + +# MERGE_RR records paths with conflicts immediately after merge +# failed. Some of the conflicted paths might have been hand resolved +# in the working tree since then, but the initial run would catch all +# and register their preimages. + +for my $path (keys %conflict) { + # This path has conflict. If it is not recorded yet, + # record the pre-image. + if (!exists $merge_rr{$path}) { + my ($name, $hunk) = compute_conflict_name($path); + next unless ($hunk); + $merge_rr{$path} = $name; + if (! -d "$rr_dir/$name") { + mkpath("$rr_dir/$name", 0, 0777); + print STDERR "Recorded preimage for '$path'\n"; + record_preimage($path, "$rr_dir/$name/preimage"); + } + } +} + +# Now some of the paths that had conflicts earlier might have been +# hand resolved. Others may be similar to a conflict already that +# was resolved before. + +for my $path (keys %merge_rr) { + my $name = $merge_rr{$path}; + + # We could resolve this automatically if we have images. + if (-f "$rr_dir/$name/preimage" && + -f "$rr_dir/$name/postimage") { + if (merge($name, $path)) { + print STDERR "Resolved '$path' using previous resolution.\n"; + # Then we do not have to worry about this path + # anymore. + delete $merge_rr{$path}; + next; + } + } + + # Let's see if we have resolved it. + (undef, my $hunk) = compute_conflict_name($path); + next if ($hunk); + + print STDERR "Recorded resolution for '$path'.\n"; + copy($path, "$rr_dir/$name/postimage"); + # And we do not have to worry about this path anymore. + delete $merge_rr{$path}; +} + +# Write out the rest. +write_rr(); diff --git a/git-reset.sh b/git-reset.sh index 6c9e58ad9..fe53fc806 100755 --- a/git-reset.sh +++ b/git-reset.sh @@ -100,4 +100,4 @@ case "$reset_type" in ;; esac -rm -f "$GIT_DIR/MERGE_HEAD" +rm -f "$GIT_DIR/MERGE_HEAD" "$GIT_DIR/rr-cache/MERGE_RR" -- 2.30.2