From 51ef1daa4a0dfaa4d777b2fa949ba051cf800554 Mon Sep 17 00:00:00 2001 From: Johannes Schindelin Date: Mon, 21 Jul 2008 12:51:02 +0200 Subject: [PATCH] Rename .git/rebase to .git/rebase-apply With git-am, it sounds awkward to have the patches in ".git/rebase/", but for technical reasons, we have to keep the same directory name for git-am and git-rebase. ".git/rebase-apply" seems to be a good compromise. Signed-off-by: Johannes Schindelin Signed-off-by: Junio C Hamano --- Documentation/SubmittingPatches | 2 +- Documentation/git-am.txt | 4 +-- Documentation/git-rebase.txt | 4 +-- Documentation/user-manual.txt | 2 +- contrib/completion/git-completion.bash | 10 +++--- contrib/emacs/git.el | 8 ++--- git-am.sh | 2 +- git-quiltimport.sh | 2 +- git-rebase.sh | 48 ++++++++++++++------------ t/t3401-rebase-partial.sh | 2 +- t/t3407-rebase-abort.sh | 2 +- t/t4150-am.sh | 22 ++++++------ t/t9106-git-svn-commit-diff-clobber.sh | 4 ++- 13 files changed, 58 insertions(+), 54 deletions(-) diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index fdfa53644..841bead9d 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -301,7 +301,7 @@ If it does not apply correctly, there can be various reasons. patch appropriately. * Your MUA corrupted your patch; "am" would complain that - the patch does not apply. Look at .git/rebase/ subdirectory and + the patch does not apply. Look at .git/rebase-apply/ subdirectory and see what 'patch' file contains and check for the common corruption patterns mentioned above. diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index 719e92498..c45c53ec2 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -143,9 +143,9 @@ aborts in the middle,. You can recover from this in one of two ways: the index file to bring it in a state that the patch should have produced. Then run the command with '--resolved' option. -The command refuses to process new mailboxes while `.git/rebase` +The command refuses to process new mailboxes while `.git/rebase-apply` directory exists, so if you decide to start over from scratch, -run `rm -f -r .git/rebase` before running the command with mailbox +run `rm -f -r .git/rebase-apply` before running the command with mailbox names. Before any patches are applied, ORIG_HEAD is set to the tip of the diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 58a5c746b..59c1b021a 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -39,8 +39,8 @@ It is possible that a merge failure will prevent this process from being completely automatic. You will have to resolve any such merge failure and run `git rebase --continue`. Another option is to bypass the commit that caused the merge failure with `git rebase --skip`. To restore the -original and remove the .git/rebase working files, use the command -`git rebase --abort` instead. +original and remove the .git/rebase-apply working files, use the +command `git rebase --abort` instead. Assume the following history exists and the current branch is "topic": diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index 8761ee7e7..c5641af19 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -2431,7 +2431,7 @@ $ git rebase origin ------------------------------------------------- This will remove each of your commits from mywork, temporarily saving -them as patches (in a directory named ".git/rebase"), update mywork to +them as patches (in a directory named ".git/rebase-apply"), update mywork to point at the latest version of origin, then apply each of the saved patches to the new mywork. The result will look like: diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index 29f6cd4e9..2edb341b5 100755 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -73,12 +73,12 @@ __git_ps1 () if [ -n "$g" ]; then local r local b - if [ -d "$g/rebase" ] + if [ -d "$g/rebase-apply" ] then - if test -f "$g/rebase/rebasing" + if test -f "$g/rebase-apply/rebasing" then r="|REBASE" - elif test -f "$g/rebase/applying" + elif test -f "$g/rebase-apply/applying" then r="|AM" else @@ -488,7 +488,7 @@ __git_whitespacelist="nowarn warn error error-all strip" _git_am () { local cur="${COMP_WORDS[COMP_CWORD]}" dir="$(__gitdir)" - if [ -d "$dir"/rebase ]; then + if [ -d "$dir"/rebase-apply ]; then __gitcomp "--skip --resolved" return fi @@ -915,7 +915,7 @@ _git_push () _git_rebase () { local cur="${COMP_WORDS[COMP_CWORD]}" dir="$(__gitdir)" - if [ -d "$dir"/rebase ] || [ -d "$dir"/rebase-merge ]; then + if [ -d "$dir"/rebase-apply ] || [ -d "$dir"/rebase-merge ]; then __gitcomp "--continue --skip --abort" return fi diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el index 43b059bba..c1cf1cbcc 100644 --- a/contrib/emacs/git.el +++ b/contrib/emacs/git.el @@ -1252,8 +1252,8 @@ Return the list of files that haven't been handled." "\n") (when subject (insert subject "\n\n")) (cond (msg (insert msg "\n")) - ((file-readable-p ".git/rebase/msg") - (insert-file-contents ".git/rebase/msg")) + ((file-readable-p ".git/rebase-apply/msg") + (insert-file-contents ".git/rebase-apply/msg")) ((file-readable-p ".git/MERGE_MSG") (insert-file-contents ".git/MERGE_MSG"))) ; delete empty lines at end @@ -1272,9 +1272,9 @@ Return the list of files that haven't been handled." (coding-system (git-get-commits-coding-system)) author-name author-email subject date) (when (eq 0 (buffer-size buffer)) - (when (file-readable-p ".git/rebase/info") + (when (file-readable-p ".git/rebase-apply/info") (with-temp-buffer - (insert-file-contents ".git/rebase/info") + (insert-file-contents ".git/rebase-apply/info") (goto-char (point-min)) (when (re-search-forward "^Author: \\(.*\\)\nEmail: \\(.*\\)$" nil t) (setq author-name (match-string 1)) diff --git a/git-am.sh b/git-am.sh index 60aaa4a58..9bf12feeb 100755 --- a/git-am.sh +++ b/git-am.sh @@ -121,7 +121,7 @@ It does not apply to blobs recorded in its index." } prec=4 -dotest="$GIT_DIR/rebase" +dotest="$GIT_DIR/rebase-apply" sign= utf8=t keep= skip= interactive= resolved= binary= rebasing= abort= resolvemsg= resume= git_apply_opt= diff --git a/git-quiltimport.sh b/git-quiltimport.sh index c9aecfd91..cebaee1cc 100755 --- a/git-quiltimport.sh +++ b/git-quiltimport.sh @@ -53,7 +53,7 @@ if ! [ -d "$QUILT_PATCHES" ] ; then fi # Temporary directories -tmp_dir="$GIT_DIR"/rebase +tmp_dir="$GIT_DIR"/rebase-apply tmp_msg="$tmp_dir/msg" tmp_patch="$tmp_dir/patch" tmp_info="$tmp_dir/info" diff --git a/git-rebase.sh b/git-rebase.sh index 6ef575481..412e135c3 100755 --- a/git-rebase.sh +++ b/git-rebase.sh @@ -14,8 +14,8 @@ It is possible that a merge failure will prevent this process from being completely automatic. You will have to resolve any such merge failure and run git rebase --continue. Another option is to bypass the commit that caused the merge failure with git rebase --skip. To restore the -original and remove the .git/rebase working files, use the command -git rebase --abort instead. +original and remove the .git/rebase-apply working files, use the +command git rebase --abort instead. Note that if is not specified on the command line, the currently checked out branch is used. @@ -150,7 +150,7 @@ while test $# != 0 do case "$1" in --continue) - test -d "$dotest" -o -d "$GIT_DIR"/rebase || + test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply || die "No rebase in progress?" git diff-files --quiet --ignore-submodules || { @@ -173,15 +173,15 @@ do finish_rb_merge exit fi - head_name=$(cat "$GIT_DIR"/rebase/head-name) && - onto=$(cat "$GIT_DIR"/rebase/onto) && - orig_head=$(cat "$GIT_DIR"/rebase/orig-head) && + head_name=$(cat "$GIT_DIR"/rebase-apply/head-name) && + onto=$(cat "$GIT_DIR"/rebase-apply/onto) && + orig_head=$(cat "$GIT_DIR"/rebase-apply/orig-head) && git am --resolved --3way --resolvemsg="$RESOLVEMSG" && move_to_original_branch exit ;; --skip) - test -d "$dotest" -o -d "$GIT_DIR"/rebase || + test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply || die "No rebase in progress?" git reset --hard HEAD || exit $? @@ -201,15 +201,15 @@ do finish_rb_merge exit fi - head_name=$(cat "$GIT_DIR"/rebase/head-name) && - onto=$(cat "$GIT_DIR"/rebase/onto) && - orig_head=$(cat "$GIT_DIR"/rebase/orig-head) && + head_name=$(cat "$GIT_DIR"/rebase-apply/head-name) && + onto=$(cat "$GIT_DIR"/rebase-apply/onto) && + orig_head=$(cat "$GIT_DIR"/rebase-apply/orig-head) && git am -3 --skip --resolvemsg="$RESOLVEMSG" && move_to_original_branch exit ;; --abort) - test -d "$dotest" -o -d "$GIT_DIR"/rebase || + test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply || die "No rebase in progress?" git rerere clear @@ -217,7 +217,7 @@ do then move_to_original_branch else - dotest="$GIT_DIR"/rebase + dotest="$GIT_DIR"/rebase-apply move_to_original_branch fi git reset --hard $(cat "$dotest/orig-head") @@ -265,18 +265,20 @@ do shift done -# Make sure we do not have $GIT_DIR/rebase +# Make sure we do not have $GIT_DIR/rebase-apply if test -z "$do_merge" then - if mkdir "$GIT_DIR"/rebase + if mkdir "$GIT_DIR"/rebase-apply then - rmdir "$GIT_DIR"/rebase + rmdir "$GIT_DIR"/rebase-apply else echo >&2 ' -It seems that I cannot create a '"$GIT_DIR"'/rebase directory, and I wonder if you -are in the middle of patch application or another rebase. If that is not -the case, please rm -fr '"$GIT_DIR"'/rebase and run me again. I am stopping in case -you still have something valuable there.' +It seems that I cannot create a '"$GIT_DIR"'/rebase-apply directory, +and I wonder if you are in the middle of patch application or another +rebase. If that is not the case, please + rm -fr '"$GIT_DIR"'/rebase-apply + and run me again. I am stopping in case you still have something +valuable there.' exit 1 fi else @@ -395,10 +397,10 @@ then git am $git_am_opt --rebasing --resolvemsg="$RESOLVEMSG" && move_to_original_branch ret=$? - test 0 != $ret -a -d "$GIT_DIR"/rebase && - echo $head_name > "$GIT_DIR"/rebase/head-name && - echo $onto > "$GIT_DIR"/rebase/onto && - echo $orig_head > "$GIT_DIR"/rebase/orig-head + test 0 != $ret -a -d "$GIT_DIR"/rebase-apply && + echo $head_name > "$GIT_DIR"/rebase-apply/head-name && + echo $onto > "$GIT_DIR"/rebase-apply/onto && + echo $orig_head > "$GIT_DIR"/rebase-apply/orig-head exit $ret fi diff --git a/t/t3401-rebase-partial.sh b/t/t3401-rebase-partial.sh index 36d9a2ae3..166ddb144 100755 --- a/t/t3401-rebase-partial.sh +++ b/t/t3401-rebase-partial.sh @@ -50,7 +50,7 @@ test_debug \ test_expect_success \ 'rebase topic branch against new master and check git-am did not get halted' \ - 'git-rebase master && test ! -d .git/rebase' + 'git-rebase master && test ! -d .git/rebase-apply' test_expect_success \ 'rebase --merge topic branch that was partially merged upstream' \ diff --git a/t/t3407-rebase-abort.sh b/t/t3407-rebase-abort.sh index 12c8804a0..4de550a63 100755 --- a/t/t3407-rebase-abort.sh +++ b/t/t3407-rebase-abort.sh @@ -74,7 +74,7 @@ testrebase() { ' } -testrebase "" .git/rebase +testrebase "" .git/rebase-apply testrebase " --merge" .git/rebase-merge test_done diff --git a/t/t4150-am.sh b/t/t4150-am.sh index 98ba020d8..6e6aaf593 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -102,7 +102,7 @@ test_expect_success 'am applies patch correctly' ' git checkout first && test_tick && git am >file && git add file && git am --resolved && - ! test -d .git/rebase && + ! test -d .git/rebase-apply && test goodbye = "$(cat another)" ' test_expect_success 'am takes patches from a Pine mailbox' ' git checkout first && cat pine patch1 | git am && - ! test -d .git/rebase && + ! test -d .git/rebase-apply && test -z "$(git diff master^..HEAD)" ' test_expect_success 'am fails on mail without patch' ' test_must_fail git am >failmail && test_must_fail git am file && -- 2.30.2