git submodule: ignore dirty submodules for summary and status
The summary and status commands only care about submodule commits, so it is
rather pointless that they check for dirty work trees. This saves the time
needed to scan the submodules work tree. Even "git status" profits from these
savings when the status.submodulesummary config option is set, as this lead to
traversing the submodule work trees twice, once for status and once again for
the submodule summary. And if the submodule was just dirty, submodule summary
produced rather meaningless output anyway:
* sub 1234567...1234567 (0):
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The summary and status commands only care about submodule commits, so it is
rather pointless that they check for dirty work trees. This saves the time
needed to scan the submodules work tree. Even "git status" profits from these
savings when the status.submodulesummary config option is set, as this lead to
traversing the submodule work trees twice, once for status and once again for
the submodule summary. And if the submodule was just dirty, submodule summary
produced rather meaningless output anyway:
* sub 1234567...1234567 (0):
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
msvc: Fix some compiler warnings
In particular, using the normal (or production) compiler
warning level (-W3), msvc complains as follows:
.../sha1.c(244) : warning C4018: '<' : signed/unsigned mismatch
.../sha1.c(270) : warning C4244: 'function' : conversion from \
'unsigned __int64' to 'unsigned long', possible loss of data
.../sha1.c(271) : warning C4244: 'function' : conversion from \
'unsigned __int64' to 'unsigned long', possible loss of data
Note that gcc issues a similar complaint about line 244 when
compiling with -Wextra.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, using the normal (or production) compiler
warning level (-W3), msvc complains as follows:
.../sha1.c(244) : warning C4018: '<' : signed/unsigned mismatch
.../sha1.c(270) : warning C4244: 'function' : conversion from \
'unsigned __int64' to 'unsigned long', possible loss of data
.../sha1.c(271) : warning C4244: 'function' : conversion from \
'unsigned __int64' to 'unsigned long', possible loss of data
Note that gcc issues a similar complaint about line 244 when
compiling with -Wextra.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4027,4041: Use test -s to test for an empty file
The tests used a mixture of 'echo -n' (which is non-portable) and either
test_cmp or diff to check if a file is empty. The much easier and portable
method to check for an empty file is '! test -s'
While we're in t4027, there was an excess test_done. Remove it.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests used a mixture of 'echo -n' (which is non-portable) and either
test_cmp or diff to check if a file is empty. The much easier and portable
method to check for an empty file is '! test -s'
While we're in t4027, there was an excess test_done. Remove it.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: Say "pass" rather than "ok" on empty lines for TAP
Lines that begin with "ok" confuse the TAP harness because it can't
distinguish them from a test counter. Work around the issue by saying
"pass" instead, which isn't a reserved TAP word.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lines that begin with "ok" confuse the TAP harness because it can't
distinguish them from a test counter. Work around the issue by saying
"pass" instead, which isn't a reserved TAP word.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: Skip tests in a way that makes sense under TAP
SKIP messages are now part of the TAP plan. A TAP harness now knows
why a particular test was skipped and can report that information. The
non-TAP harness built into Git's test-lib did nothing special with
these messages, and is unaffected by these changes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SKIP messages are now part of the TAP plan. A TAP harness now knows
why a particular test was skipped and can report that information. The
non-TAP harness built into Git's test-lib did nothing special with
these messages, and is unaffected by these changes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib: output a newline before "ok" under a TAP harness
Some tests in the testsuite will emit a line that doesn't end with a
newline, right before we're about to output "ok" or "not ok". This
breaks the TAP output with "Tests out of sequence" errors since a TAP
harness can't understand this:
ok 1 - A test
[some output here]ok 2 - Another test
ok 3 - Yet another test
Work around it by emitting an empty line before we're about to say
"ok" or "not ok", but only if we're running under --verbose and
HARNESS_ACTIVE=1 is set, which'll only be the case when running under
a harnesses like prove(1).
I think it's better to do this than fix each tests by adding `&& echo'
everywhere. More tests might be added that break TAP in the future,
and a human isn't going to look at the extra whitespace, since
HARNESS_ACTIVE=1 always means a harness is reading it.
The tests that had issues were:
t1007, t3410, t3413, t3409, t3414, t3415, t3416, t3412, t3404,
t5407, t7402, t7003, t9001
With this workaround the entire test suite runs without errors under:
prove -j 10 ./t[0-9]*.sh :: --verbose
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in the testsuite will emit a line that doesn't end with a
newline, right before we're about to output "ok" or "not ok". This
breaks the TAP output with "Tests out of sequence" errors since a TAP
harness can't understand this:
ok 1 - A test
[some output here]ok 2 - Another test
ok 3 - Yet another test
Work around it by emitting an empty line before we're about to say
"ok" or "not ok", but only if we're running under --verbose and
HARNESS_ACTIVE=1 is set, which'll only be the case when running under
a harnesses like prove(1).
I think it's better to do this than fix each tests by adding `&& echo'
everywhere. More tests might be added that break TAP in the future,
and a human isn't going to look at the extra whitespace, since
HARNESS_ACTIVE=1 always means a harness is reading it.
The tests that had issues were:
t1007, t3410, t3413, t3409, t3414, t3415, t3416, t3412, t3404,
t5407, t7402, t7003, t9001
With this workaround the entire test suite runs without errors under:
prove -j 10 ./t[0-9]*.sh :: --verbose
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib: Make the test_external_* functions TAP-aware
Before TAP we just ran the Perl test and assumed that it failed if
nothing was printed on STDERR. Continue doing that, but introduce a
`test_external_has_tap' variable which tests can set to indicate that
they're outputting TAP.
If it's set we won't output a test plan, but trust the external test
to do so. That way we can make external tests work with a TAP harness,
but still maintain compatibility with test-lib's own way of tracking
tests through the test-results directory.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before TAP we just ran the Perl test and assumed that it failed if
nothing was printed on STDERR. Continue doing that, but introduce a
`test_external_has_tap' variable which tests can set to indicate that
they're outputting TAP.
If it's set we won't output a test plan, but trust the external test
to do so. That way we can make external tests work with a TAP harness,
but still maintain compatibility with test-lib's own way of tracking
tests through the test-results directory.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib: Adjust output to be valid TAP format
TAP, the Test Anything Protocol, is a simple text-based interface
between testing modules in a test harness. test-lib.sh's output was
already very close to being valid TAP. This change brings it all the
way there. Before:
$ ./t0005-signals.sh
* ok 1: sigchain works
* passed all 1 test(s)
And after:
$ ./t0005-signals.sh
ok 1 - sigchain works
# passed all 1 test(s)
1..1
The advantage of using TAP is that any program that reads the format
(a "test harness") can run the tests. The most popular of these is the
prove(1) utility that comes with Perl. It can run tests in parallel,
display colored output, format the output to console, file, HTML etc.,
and much more. An example:
$ prove ./t0005-signals.sh
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.01 cusr 0.02 csys = 0.06 CPU)
Result: PASS
prove(1) gives you human readable output without being too
verbose. Running the test suite in parallel with `make test -j15`
produces a flood of text. Running them with `prove -j 15 ./t[0-9]*.sh`
makes it easy to follow what's going on.
All this patch does is re-arrange the output a bit so that it conforms
with the TAP spec, everything that the test suite did before continues
to work. That includes aggregating results in t/test-results/, the
--verbose, --debug and other options for tests, and the test color
output.
TAP harnesses ignore everything that they don't know about, so running
the tests with --verbose works:
$ prove ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh .. Terminated
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.01 cusr 0.01 csys = 0.05 CPU)
Result: PASS
Just supply the -v option to prove itself to get all the verbose
output that it suppresses:
$ prove -v ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh ..
Initialized empty Git repository in /home/avar/g/git/t/trash directory.t0005-signals/.git/
expecting success:
test-sigchain >actual
case "$?" in
143) true ;; # POSIX w/ SIGTERM=15
3) true ;; # Windows
*) false ;;
esac &&
test_cmp expect actual
Terminated
ok 1 - sigchain works
# passed all 1 test(s)
1..1
ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.01 cusr 0.01 csys = 0.04 CPU)
Result: PASS
As a further example, consider this test script that uses a lot of
test-lib.sh features by Jakub Narebski:
#!/bin/sh
test_description='this is a sample test.
This test is here to see various test outputs.'
. ./test-lib.sh
say 'diagnostic message'
test_expect_success 'true test' 'true'
test_expect_success 'false test' 'false'
test_expect_failure 'true test (todo)' 'true'
test_expect_failure 'false test (todo)' 'false'
test_debug 'echo "debug message"'
test_done
The output of that was previously:
* diagnostic message # yellow
* ok 1: true test
* FAIL 2: false test # bold red
false
* FIXED 3: true test (todo)
* still broken 4: false test (todo) # bold green
* fixed 1 known breakage(s) # green
* still have 1 known breakage(s) # bold red
* failed 1 among remaining 3 test(s) # bold red
But is now:
diagnostic message # yellow
ok 1 - true test
not ok - 2 false test # bold red
# false
ok 3 - true test (todo) # TODO known breakage
not ok 4 - false test (todo) # TODO known breakage # bold green
# fixed 1 known breakage(s) # green
# still have 1 known breakage(s) # bold red
# failed 1 among remaining 3 test(s) # bold red
1..4
All the coloring is preserved when the test is run manually. Under
prove(1) the test performs as expected, even with --debug and
--verbose options:
$ prove ./example.sh :: --debug --verbose
./example.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/4 subtests
(1 TODO test unexpectedly succeeded)
Test Summary Report
-------------------
./example.sh (Wstat: 256 Tests: 4 Failed: 1)
Failed test: 2
TODO passed: 3
Non-zero exit status: 1
Files=1, Tests=4, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.00 cusr 0.01 csys = 0.03 CPU)
Result: FAIL
The TAP harness itself doesn't get confused by the color output, they
aren't used by test-lib.sh stdout isn't open to a terminal (test -t 1).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
TAP, the Test Anything Protocol, is a simple text-based interface
between testing modules in a test harness. test-lib.sh's output was
already very close to being valid TAP. This change brings it all the
way there. Before:
$ ./t0005-signals.sh
* ok 1: sigchain works
* passed all 1 test(s)
And after:
$ ./t0005-signals.sh
ok 1 - sigchain works
# passed all 1 test(s)
1..1
The advantage of using TAP is that any program that reads the format
(a "test harness") can run the tests. The most popular of these is the
prove(1) utility that comes with Perl. It can run tests in parallel,
display colored output, format the output to console, file, HTML etc.,
and much more. An example:
$ prove ./t0005-signals.sh
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.01 cusr 0.02 csys = 0.06 CPU)
Result: PASS
prove(1) gives you human readable output without being too
verbose. Running the test suite in parallel with `make test -j15`
produces a flood of text. Running them with `prove -j 15 ./t[0-9]*.sh`
makes it easy to follow what's going on.
All this patch does is re-arrange the output a bit so that it conforms
with the TAP spec, everything that the test suite did before continues
to work. That includes aggregating results in t/test-results/, the
--verbose, --debug and other options for tests, and the test color
output.
TAP harnesses ignore everything that they don't know about, so running
the tests with --verbose works:
$ prove ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh .. Terminated
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.01 cusr 0.01 csys = 0.05 CPU)
Result: PASS
Just supply the -v option to prove itself to get all the verbose
output that it suppresses:
$ prove -v ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh ..
Initialized empty Git repository in /home/avar/g/git/t/trash directory.t0005-signals/.git/
expecting success:
test-sigchain >actual
case "$?" in
143) true ;; # POSIX w/ SIGTERM=15
3) true ;; # Windows
*) false ;;
esac &&
test_cmp expect actual
Terminated
ok 1 - sigchain works
# passed all 1 test(s)
1..1
ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.01 cusr 0.01 csys = 0.04 CPU)
Result: PASS
As a further example, consider this test script that uses a lot of
test-lib.sh features by Jakub Narebski:
#!/bin/sh
test_description='this is a sample test.
This test is here to see various test outputs.'
. ./test-lib.sh
say 'diagnostic message'
test_expect_success 'true test' 'true'
test_expect_success 'false test' 'false'
test_expect_failure 'true test (todo)' 'true'
test_expect_failure 'false test (todo)' 'false'
test_debug 'echo "debug message"'
test_done
The output of that was previously:
* diagnostic message # yellow
* ok 1: true test
* FAIL 2: false test # bold red
false
* FIXED 3: true test (todo)
* still broken 4: false test (todo) # bold green
* fixed 1 known breakage(s) # green
* still have 1 known breakage(s) # bold red
* failed 1 among remaining 3 test(s) # bold red
But is now:
diagnostic message # yellow
ok 1 - true test
not ok - 2 false test # bold red
# false
ok 3 - true test (todo) # TODO known breakage
not ok 4 - false test (todo) # TODO known breakage # bold green
# fixed 1 known breakage(s) # green
# still have 1 known breakage(s) # bold red
# failed 1 among remaining 3 test(s) # bold red
1..4
All the coloring is preserved when the test is run manually. Under
prove(1) the test performs as expected, even with --debug and
--verbose options:
$ prove ./example.sh :: --debug --verbose
./example.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/4 subtests
(1 TODO test unexpectedly succeeded)
Test Summary Report
-------------------
./example.sh (Wstat: 256 Tests: 4 Failed: 1)
Failed test: 2
TODO passed: 3
Non-zero exit status: 1
Files=1, Tests=4, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.00 cusr 0.01 csys = 0.03 CPU)
Result: FAIL
The TAP harness itself doesn't get confused by the color output, they
aren't used by test-lib.sh stdout isn't open to a terminal (test -t 1).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: grep: fix asciidoc problem with --
Asciidoc interprets two dashes separated by spaces as a single big
dash. So let's escape the first dash, so that "\--" will properly
appear as "--".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc interprets two dashes separated by spaces as a single big
dash. So let's escape the first dash, so that "\--" will properly
appear as "--".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
revert: accept arbitrary rev-list options
This can be useful to do something like:
git rev-list --reverse master -- README | git cherry-pick -n --stdin
without using xargs.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be useful to do something like:
git rev-list --reverse master -- README | git cherry-pick -n --stdin
without using xargs.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
url_decode: URL scheme ends with a colon and does not require a slash
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-cat-file.txt: Document --textconv
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow customizable commit decorations colors
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash completion: Support "divergence from upstream" messages in __git_ps1
Add a notification in the command prompt specifying whether (and optionally how
far) your branch has diverged from its upstream. This is especially helpful in
small teams that very frequently (forget to) push to each other.
Support git-svn upstream detection as a special case, as migrators from
centralised version control systems are especially likely to forget to push.
Support for other types of upstream than SVN should be easy to add if anyone is
so inclined.
Signed-off-by: Andrew Sayers <andrew-git@pileofstuff.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a notification in the command prompt specifying whether (and optionally how
far) your branch has diverged from its upstream. This is especially helpful in
small teams that very frequently (forget to) push to each other.
Support git-svn upstream detection as a special case, as migrators from
centralised version control systems are especially likely to forget to push.
Support for other types of upstream than SVN should be easy to add if anyone is
so inclined.
Signed-off-by: Andrew Sayers <andrew-git@pileofstuff.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
msvc: Fix some "expr evaluates to function" compiler warnings
In particular, the following warning is issued while compiling
notes.c:
notes.c(927) : warning C4550: expression evaluates to a \
function which is missing an argument list
along with identical warnings on lines 928, 1016 and 1017.
In order to suppress the warning, we change the definition of
combine_notes_fn, so that the symbol type is an (explicit)
"pointer to function ...". As a result, several other
declarations need some minor fix-up to take account of the
new typedef.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, the following warning is issued while compiling
notes.c:
notes.c(927) : warning C4550: expression evaluates to a \
function which is missing an argument list
along with identical warnings on lines 928, 1016 and 1017.
In order to suppress the warning, we change the definition of
combine_notes_fn, so that the symbol type is an (explicit)
"pointer to function ...". As a result, several other
declarations need some minor fix-up to take account of the
new typedef.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jk/url-decode'
* jk/url-decode:
url.c: "<scheme>://" part at the beginning should not be URL decoded
* jk/url-decode:
url.c: "<scheme>://" part at the beginning should not be URL decoded
url.c: "<scheme>://" part at the beginning should not be URL decoded
When using the protocol git+ssh:// for example we do not want to
decode the '+' as a space. The url decoding must take place only
for the server name and parameters.
This fixes a regression introduced in 9d2e942.
Initial-fix-by: Pascal Obry <pascal.obry@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the protocol git+ssh:// for example we do not want to
decode the '+' as a space. The url decoding must take place only
for the server name and parameters.
This fixes a regression introduced in 9d2e942.
Initial-fix-by: Pascal Obry <pascal.obry@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update draft release notes to 1.7.2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jc/maint-simpler-common-prefix'
* jc/maint-simpler-common-prefix:
common_prefix: simplify and fix scanning for prefixes
* jc/maint-simpler-common-prefix:
common_prefix: simplify and fix scanning for prefixes
Merge branch 'sb/format-patch-signature'
* sb/format-patch-signature:
completion: Add --signature and format.signature
format-patch: Add a signature option (--signature)
* sb/format-patch-signature:
completion: Add --signature and format.signature
format-patch: Add a signature option (--signature)
Merge branch 'mg/pretty-magic-space'
* mg/pretty-magic-space:
pretty: Introduce ' ' modifier to add space if non-empty
Conflicts:
pretty.c
* mg/pretty-magic-space:
pretty: Introduce ' ' modifier to add space if non-empty
Conflicts:
pretty.c
Merge branch 'jn/gitweb-return-or-exit-cleanup'
* jn/gitweb-return-or-exit-cleanup:
gitweb: Return or exit after done serving request
Conflicts:
gitweb/gitweb.perl
* jn/gitweb-return-or-exit-cleanup:
gitweb: Return or exit after done serving request
Conflicts:
gitweb/gitweb.perl
Merge branch 'bd/maint-unpack-trees-parawalk-fix'
* bd/maint-unpack-trees-parawalk-fix:
unpack-trees: Make index lookahead less pessimal
* bd/maint-unpack-trees-parawalk-fix:
unpack-trees: Make index lookahead less pessimal
Merge branch 'cc/cherry-pick-series'
* cc/cherry-pick-series:
Documentation/revert: describe passing more than one commit
Documentation/cherry-pick: describe passing more than one commit
revert: add tests to check cherry-picking many commits
revert: allow cherry-picking more than one commit
revert: change help_msg() to take no argument
revert: refactor code into a do_pick_commit() function
revert: use run_command_v_opt() instead of execv_git_cmd()
revert: cleanup code for -x option
* cc/cherry-pick-series:
Documentation/revert: describe passing more than one commit
Documentation/cherry-pick: describe passing more than one commit
revert: add tests to check cherry-picking many commits
revert: allow cherry-picking more than one commit
revert: change help_msg() to take no argument
revert: refactor code into a do_pick_commit() function
revert: use run_command_v_opt() instead of execv_git_cmd()
revert: cleanup code for -x option
Merge branch 'jc/rev-list-ancestry-path'
* jc/rev-list-ancestry-path:
revision: Turn off history simplification in --ancestry-path mode
revision: Fix typo in --ancestry-path error message
Documentation/rev-list-options.txt: Explain --ancestry-path
Documentation/rev-list-options.txt: Fix missing line in example history graph
revision: --ancestry-path
* jc/rev-list-ancestry-path:
revision: Turn off history simplification in --ancestry-path mode
revision: Fix typo in --ancestry-path error message
Documentation/rev-list-options.txt: Explain --ancestry-path
Documentation/rev-list-options.txt: Fix missing line in example history graph
revision: --ancestry-path
Merge branch 'lt/extended-sha1-match-commit-with-regexp'
* lt/extended-sha1-match-commit-with-regexp:
Make :/ accept a regex rather than a fixed pattern
* lt/extended-sha1-match-commit-with-regexp:
Make :/ accept a regex rather than a fixed pattern
Merge branch 'maint'
* maint:
Update draft release notes to 1.7.1.1
tests: remove unnecessary '^' from 'expr' regular expression
Conflicts:
diff.c
* maint:
Update draft release notes to 1.7.1.1
tests: remove unnecessary '^' from 'expr' regular expression
Conflicts:
diff.c
Update draft release notes to 1.7.1.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'ic/maint-rebase-i-abort' into maint
* ic/maint-rebase-i-abort:
rebase -i: Abort cleanly if new base cannot be checked out
* ic/maint-rebase-i-abort:
rebase -i: Abort cleanly if new base cannot be checked out
Merge branch 'cc/maint-commit-reflog-msg' into maint
* cc/maint-commit-reflog-msg:
commit: use value of GIT_REFLOG_ACTION env variable as reflog message
* cc/maint-commit-reflog-msg:
commit: use value of GIT_REFLOG_ACTION env variable as reflog message
Merge branch 'jk/maint-advice-empty-amend' into maint
* jk/maint-advice-empty-amend:
commit: give advice on empty amend
* jk/maint-advice-empty-amend:
commit: give advice on empty amend
Merge branch 'tc/commit-abbrev-fix' into maint
* tc/commit-abbrev-fix:
commit::print_summary(): don't use format_commit_message()
t7502-commit: add summary output tests for empty and merge commits
t7502-commit: add tests for summary output
* tc/commit-abbrev-fix:
commit::print_summary(): don't use format_commit_message()
t7502-commit: add summary output tests for empty and merge commits
t7502-commit: add tests for summary output
Merge branch 'jn/document-rebase-i-p-limitation' into maint
* jn/document-rebase-i-p-limitation:
rebase -i -p: document shortcomings
* jn/document-rebase-i-p-limitation:
rebase -i -p: document shortcomings
Merge branch 'jn/checkout-doc' into maint
* jn/checkout-doc:
Documentation/checkout: clarify description
Documentation/checkout: clarify description
* jn/checkout-doc:
Documentation/checkout: clarify description
Documentation/checkout: clarify description
Merge branch 'cc/maint-diff-CC-binary' into maint
* cc/maint-diff-CC-binary:
diff: fix "git show -C -C" output when renaming a binary file
Conflicts:
diff.c
* cc/maint-diff-CC-binary:
diff: fix "git show -C -C" output when renaming a binary file
Conflicts:
diff.c
Merge branch 'jc/t9129-any-utf8' into maint
* jc/t9129-any-utf8:
t9129: fix UTF-8 locale detection
* jc/t9129-any-utf8:
t9129: fix UTF-8 locale detection
Merge branch 'cb/ls-files-cdup' into maint
* cb/ls-files-cdup:
ls-files: allow relative pathspec
quote.c: separate quoting and relative path generation
* cb/ls-files-cdup:
ls-files: allow relative pathspec
quote.c: separate quoting and relative path generation
Merge branch 'tc/merge-m-log' into maint
* tc/merge-m-log:
merge: --log appends shortlog to message if specified
fmt-merge-msg: add function to append shortlog only
fmt-merge-msg: refactor merge title formatting
fmt-merge-msg: minor refactor of fmt_merge_msg()
merge: rename variable
merge: update comment
t7604-merge-custom-message: show that --log doesn't append to -m
t7604-merge-custom-message: shift expected output creation
* tc/merge-m-log:
merge: --log appends shortlog to message if specified
fmt-merge-msg: add function to append shortlog only
fmt-merge-msg: refactor merge title formatting
fmt-merge-msg: minor refactor of fmt_merge_msg()
merge: rename variable
merge: update comment
t7604-merge-custom-message: show that --log doesn't append to -m
t7604-merge-custom-message: shift expected output creation
Merge branch 'ph/clone-message-reword' into maint
* ph/clone-message-reword:
clone: reword messages to match the end-user perception
* ph/clone-message-reword:
clone: reword messages to match the end-user perception
Merge branch 'jn/maint-amend-missing-name' into maint
* jn/maint-amend-missing-name:
commit --amend: cope with missing display name
* jn/maint-amend-missing-name:
commit --amend: cope with missing display name
Merge branch 'pc/remove-warn' into maint
* pc/remove-warn:
Remove a redundant errno test in a usage of remove_path
Introduce remove_or_warn function
Implement the rmdir_or_warn function
Generalise the unlink_or_warn function
* pc/remove-warn:
Remove a redundant errno test in a usage of remove_path
Introduce remove_or_warn function
Implement the rmdir_or_warn function
Generalise the unlink_or_warn function
tests: remove unnecessary '^' from 'expr' regular expression
As Brandon noticed, a regular expression match given to 'expr' is already
anchored at the beginning. Some versions of expr even complain about this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As Brandon noticed, a regular expression match given to 'expr' is already
anchored at the beginning. Some versions of expr even complain about this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/t7811-grep-open.sh: remove broken/redundant creation of fake "less" script
The fake "less" script was already created in a previous test titled
'setup: fake "less"', so it is redundant. Additionally, it is broken since
the redirection of 'cat' is to a file named 'less', but the chmod operates
on the file named by the $less variable which may not contain the value
'less'.
So, just remove this code, and rely on the creation of the fake "less"
script performed earlier within the test script.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fake "less" script was already created in a previous test titled
'setup: fake "less"', so it is redundant. Additionally, it is broken since
the redirection of 'cat' is to a file named 'less', but the chmod operates
on the file named by the $less variable which may not contain the value
'less'.
So, just remove this code, and rely on the creation of the fake "less"
script performed earlier within the test script.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/t7811-grep-open.sh: ensure fake "less" is made executable
The fake "less" script was not being made executable. This can cause the
tests that follow to fail. This failure is not apparent on platforms which
have DEFAULT_PAGER set to the string "less", since lib-pager.sh will have
set the $less variable to "less" and the SIMPLEPAGER prerequisite will have
been set, and so the "less" script will have already been created properly
and made executable in test 2 'git grep -O'. On platforms which set
DEFAULT_PAGER to something like "more", no such script will have been
previously created, and tests 7 and 8 will fail.
So, add a call to chmod to make the fake "less" script executable.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fake "less" script was not being made executable. This can cause the
tests that follow to fail. This failure is not apparent on platforms which
have DEFAULT_PAGER set to the string "less", since lib-pager.sh will have
set the $less variable to "less" and the SIMPLEPAGER prerequisite will have
been set, and so the "less" script will have already been created properly
and made executable in test 2 'git grep -O'. On platforms which set
DEFAULT_PAGER to something like "more", no such script will have been
previously created, and tests 7 and 8 will fail.
So, add a call to chmod to make the fake "less" script executable.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/lib-pager.sh: remove unnecessary '^' from 'expr' regular expression
Regular expressions matched by 'expr' have an implicit '^' at the beginning
of them and so are anchored to the beginning of the string. Using the '^'
character to mean "match at the beginning", is redundant and could produce
the wrong result if 'expr' implementations interpret the '^' as a literal
'^'. Additionally, GNU expr 5.97 complains like this:
expr: warning: unportable BRE: `^[a-z][a-z]*$': using `^' as the first character of the basic regular expression is not portable; it is being ignored
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regular expressions matched by 'expr' have an implicit '^' at the beginning
of them and so are anchored to the beginning of the string. Using the '^'
character to mean "match at the beginning", is redundant and could produce
the wrong result if 'expr' implementations interpret the '^' as a literal
'^'. Additionally, GNU expr 5.97 complains like this:
expr: warning: unportable BRE: `^[a-z][a-z]*$': using `^' as the first character of the basic regular expression is not portable; it is being ignored
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'js/maint-receive-pack-symref-alias'
* js/maint-receive-pack-symref-alias:
* js/maint-receive-pack-symref-alias:
Merge branch 'cc/maint-commit-reflog-msg'
* cc/maint-commit-reflog-msg:
commit: use value of GIT_REFLOG_ACTION env variable as reflog message
* cc/maint-commit-reflog-msg:
commit: use value of GIT_REFLOG_ACTION env variable as reflog message
Merge branch 'ic/maint-rebase-i-abort'
* ic/maint-rebase-i-abort:
rebase -i: Abort cleanly if new base cannot be checked out
* ic/maint-rebase-i-abort:
rebase -i: Abort cleanly if new base cannot be checked out
Merge branch 'jk/maint-advice-empty-amend'
* jk/maint-advice-empty-amend:
commit: give advice on empty amend
* jk/maint-advice-empty-amend:
commit: give advice on empty amend
Merge branch 'eb/core-eol'
* eb/core-eol:
Add "core.eol" config variable
Rename the "crlf" attribute "text"
Add per-repository eol normalization
Add tests for per-repository eol normalization
Conflicts:
Documentation/config.txt
Makefile
* eb/core-eol:
Add "core.eol" config variable
Rename the "crlf" attribute "text"
Add per-repository eol normalization
Add tests for per-repository eol normalization
Conflicts:
Documentation/config.txt
Makefile
Merge branch 'fg/autocrlf'
* fg/autocrlf:
autocrlf: Make it work also for un-normalized repositories
* fg/autocrlf:
autocrlf: Make it work also for un-normalized repositories
Merge branch 'sm/branch-broken-ref'
* sm/branch-broken-ref:
branch: don't fail listing branches if one of the commits wasn't found
branch: exit status now reflects if branch listing finds an error
* sm/branch-broken-ref:
branch: don't fail listing branches if one of the commits wasn't found
branch: exit status now reflects if branch listing finds an error
Merge branch 'rr/parse-date-refactor'
* rr/parse-date-refactor:
Refactor parse_date for approxidate functions
* rr/parse-date-refactor:
Refactor parse_date for approxidate functions
Merge branch 'jn/document-rebase-i-p-limitation'
* jn/document-rebase-i-p-limitation:
rebase -i -p: document shortcomings
* jn/document-rebase-i-p-limitation:
rebase -i -p: document shortcomings
Merge branch 'tc/commit-abbrev-fix'
* tc/commit-abbrev-fix:
commit::print_summary(): don't use format_commit_message()
t7502-commit: add summary output tests for empty and merge commits
t7502-commit: add tests for summary output
* tc/commit-abbrev-fix:
commit::print_summary(): don't use format_commit_message()
t7502-commit: add summary output tests for empty and merge commits
t7502-commit: add tests for summary output
Merge branch 'tr/receive-pack-aliased-update-fix'
* tr/receive-pack-aliased-update-fix:
check_aliased_update: strcpy() instead of strcat() to copy
* tr/receive-pack-aliased-update-fix:
check_aliased_update: strcpy() instead of strcat() to copy
Merge branch 'gs/usage-to-stdout'
* gs/usage-to-stdout:
parseopt: wrap rev-parse --parseopt usage for eval consumption
print the usage string on stdout instead of stderr
Conflicts:
parse-options.h
* gs/usage-to-stdout:
parseopt: wrap rev-parse --parseopt usage for eval consumption
print the usage string on stdout instead of stderr
Conflicts:
parse-options.h
Merge branch 'js/async-thread'
* js/async-thread:
fast-import: die_nicely() back to vsnprintf (reverts part of ebaa79f)
Enable threaded async procedures whenever pthreads is available
Dying in an async procedure should only exit the thread, not the process.
Reimplement async procedures using pthreads
Windows: more pthreads functions
Fix signature of fcntl() compatibility dummy
Make report() from usage.c public as vreportf() and use it.
Modernize t5530-upload-pack-error.
Conflicts:
http-backend.c
* js/async-thread:
fast-import: die_nicely() back to vsnprintf (reverts part of ebaa79f)
Enable threaded async procedures whenever pthreads is available
Dying in an async procedure should only exit the thread, not the process.
Reimplement async procedures using pthreads
Windows: more pthreads functions
Fix signature of fcntl() compatibility dummy
Make report() from usage.c public as vreportf() and use it.
Modernize t5530-upload-pack-error.
Conflicts:
http-backend.c
Merge branch 'gv/portable'
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
Merge branch 'bc/portable'
* bc/portable:
Remove python 2.5'isms
Makefile: add PYTHON_PATH to GIT-BUILD-OPTIONS
t/aggregate-results: accomodate systems with small max argument list length
t/t7006: ignore return status of shell's unset builtin
t/t5150: remove space from sed script
git-request-pull.sh: remove -e switch to shell interpreter which breaks ksh
t/t5800: skip if python version is older than 2.5
* bc/portable:
Remove python 2.5'isms
Makefile: add PYTHON_PATH to GIT-BUILD-OPTIONS
t/aggregate-results: accomodate systems with small max argument list length
t/t7006: ignore return status of shell's unset builtin
t/t5150: remove space from sed script
git-request-pull.sh: remove -e switch to shell interpreter which breaks ksh
t/t5800: skip if python version is older than 2.5
Merge branch 'jn/gitweb-fastcgi'
* jn/gitweb-fastcgi:
gitweb: Run in FastCGI mode if gitweb script has .fcgi extension
gitweb: Add support for FastCGI, using CGI::Fast
gitweb: Put all per-connection code in run() subroutine
* jn/gitweb-fastcgi:
gitweb: Run in FastCGI mode if gitweb script has .fcgi extension
gitweb: Add support for FastCGI, using CGI::Fast
gitweb: Put all per-connection code in run() subroutine
Merge branch 'jn/checkout-doc'
* jn/checkout-doc:
Documentation/checkout: clarify description
Documentation/checkout: clarify description
* jn/checkout-doc:
Documentation/checkout: clarify description
Documentation/checkout: clarify description
Merge branch 'em/checkout-orphan'
* em/checkout-orphan:
log_ref_setup: don't return stack-allocated array
bash completion: add --orphan to 'git checkout'
t3200: test -l with core.logAllRefUpdates options
checkout --orphan: respect -l option always
refs: split log_ref_write logic into log_ref_setup
Documentation: alter checkout --orphan description
* em/checkout-orphan:
log_ref_setup: don't return stack-allocated array
bash completion: add --orphan to 'git checkout'
t3200: test -l with core.logAllRefUpdates options
checkout --orphan: respect -l option always
refs: split log_ref_write logic into log_ref_setup
Documentation: alter checkout --orphan description
Drop items that are 1.7.1.1 fixes from the 1.7.1 release notes
Merge branch 'maint'
* maint:
Update draft release notes to 1.7.1.1
* maint:
Update draft release notes to 1.7.1.1
Update draft release notes to 1.7.1.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'mc/maint-zoneparse' into maint
* mc/maint-zoneparse:
Add "Z" as an alias for the timezone "UTC"
* mc/maint-zoneparse:
Add "Z" as an alias for the timezone "UTC"
Merge branch 'jk/diff-m-doc' into maint
* jk/diff-m-doc:
docs: clarify meaning of -M for git-log
* jk/diff-m-doc:
docs: clarify meaning of -M for git-log
Merge branch 'jn/maint-doc-ignore' into maint
* jn/maint-doc-ignore:
gitignore.5: Clarify matching rules
* jn/maint-doc-ignore:
gitignore.5: Clarify matching rules
Merge branch 'bs/userdiff-php' into maint
* bs/userdiff-php:
diff: Support visibility modifiers in the PHP hunk header regexp
* bs/userdiff-php:
diff: Support visibility modifiers in the PHP hunk header regexp
Merge branch 'jk/maint-sha1-file-name-fix' into maint
* jk/maint-sha1-file-name-fix:
remove over-eager caching in sha1_file_name
* jk/maint-sha1-file-name-fix:
remove over-eager caching in sha1_file_name
Merge branch 'jk/maint-pull-dry-run-noop' into maint
* jk/maint-pull-dry-run-noop:
pull: do nothing on --dry-run
* jk/maint-pull-dry-run-noop:
pull: do nothing on --dry-run
Merge branch 'bw/diff-metainfo-color' into maint
* bw/diff-metainfo-color:
diff: fix coloring of extended diff headers
* bw/diff-metainfo-color:
diff: fix coloring of extended diff headers
Merge branch 'cb/assume-unchanged-fix' into maint
* cb/assume-unchanged-fix:
Documentation: git-add does not update files marked "assume unchanged"
do not overwrite files marked "assume unchanged"
* cb/assume-unchanged-fix:
Documentation: git-add does not update files marked "assume unchanged"
do not overwrite files marked "assume unchanged"
Merge branch 'jn/notes-doc' into maint
* jn/notes-doc:
Documentation/notes: nitpicks
Documentation/notes: clean up description of rewriting configuration
Documentation/notes: simplify treatment of default display refs
Documentation/log: add a CONFIGURATION section
Documentation/notes: simplify treatment of default notes ref
Documentation/notes: add configuration section
Documentation/notes: describe content of notes blobs
Documentation/notes: document format of notes trees
* jn/notes-doc:
Documentation/notes: nitpicks
Documentation/notes: clean up description of rewriting configuration
Documentation/notes: simplify treatment of default display refs
Documentation/log: add a CONFIGURATION section
Documentation/notes: simplify treatment of default notes ref
Documentation/notes: add configuration section
Documentation/notes: describe content of notes blobs
Documentation/notes: document format of notes trees
Merge branch 'ab/test-cleanup' into maint
* ab/test-cleanup:
Turn setup code in t2007-checkout-symlink.sh into a test
Move t6000lib.sh to lib-*
* ab/test-cleanup:
Turn setup code in t2007-checkout-symlink.sh into a test
Move t6000lib.sh to lib-*
Merge branch 'rs/diff-no-minimal' into maint
* rs/diff-no-minimal:
git diff too slow for a file
* rs/diff-no-minimal:
git diff too slow for a file
Merge branch 'bg/apply-blank-trailing-context' into maint
* bg/apply-blank-trailing-context:
apply: Allow blank *trailing* context lines to match beyond EOF
* bg/apply-blank-trailing-context:
apply: Allow blank *trailing* context lines to match beyond EOF
Merge branch 'maint'
* maint:
gitweb/Makefile: fix typo in gitweb.min.css rule
Conflicts:
gitweb/Makefile
* maint:
gitweb/Makefile: fix typo in gitweb.min.css rule
Conflicts:
gitweb/Makefile
git-cvsserver: fix error for invalid password formats
Change the error message to report the erroneous password
character. $1 was never set in the previos version, it was a leftover
from older code that used a regex for the test.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the error message to report the erroneous password
character. $1 was never set in the previos version, it was a leftover
from older code that used a regex for the test.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-cvsserver: typo in a comment: bas -> has
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
log --decorate: Colorize commit decorations
This makes the decorations stand out more and easier to distinguish
and spot because they are colored differently depending on their type.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the decorations stand out more and easier to distinguish
and spot because they are colored differently depending on their type.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
log-tree.c: Use struct name_decoration's type for classifying decoration
The "tag: " prefix is no longer prepended to the name of the decoration.
It is now printed conditionally by show_decorations if the decoration
type is DECORATION_REF_TAG.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "tag: " prefix is no longer prepended to the name of the decoration.
It is now printed conditionally by show_decorations if the decoration
type is DECORATION_REF_TAG.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit.h: add 'type' to struct name_decoration
This allows for semantically better handling of decoration type.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows for semantically better handling of decoration type.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb/Makefile: fix typo in gitweb.min.css rule
This typo has been in place since the rule was originally added by
0e6ce21 (Gitweb: add support for minifying gitweb.css).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This typo has been in place since the rule was originally added by
0e6ce21 (Gitweb: add support for minifying gitweb.css).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/t8007: test textconv support for cat-file
Test the correct functionning of textconv with cat-file <sha1:blob>
and cat-file HEAD^ <file>. Test the case when no driver is specified
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr>
Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test the correct functionning of textconv with cat-file <sha1:blob>
and cat-file HEAD^ <file>. Test the case when no driver is specified
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr>
Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
textconv: support for cat_file
Make the textconv_object function public, and add --textconv option to cat-file
to perform conversion on blob objects. Using --textconv implies that we are
working on a blob.
As files drivers need to be initialized, a new config is required in addition
to git_default_config. Therefore git_cat_file_config() is introduced
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr>
Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the textconv_object function public, and add --textconv option to cat-file
to perform conversion on blob objects. Using --textconv implies that we are
working on a blob.
As files drivers need to be initialized, a new config is required in addition
to git_default_config. Therefore git_cat_file_config() is introduced
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr>
Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update draft release notes to 1.7.2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'cc/maint-diff-CC-binary'
* cc/maint-diff-CC-binary:
diff: fix "git show -C -C" output when renaming a binary file
Conflicts:
diff.c
* cc/maint-diff-CC-binary:
diff: fix "git show -C -C" output when renaming a binary file
Conflicts:
diff.c
Merge branch 'by/diff-graph'
* by/diff-graph:
Make --color-words work well with --graph
graph.c: register a callback for graph output
Emit a whole line in one go
diff.c: Output the text graph padding before each diff line
Output the graph columns at the end of the commit message
Add a prefix output callback to diff output
Conflicts:
diff.c
* by/diff-graph:
Make --color-words work well with --graph
graph.c: register a callback for graph output
Emit a whole line in one go
diff.c: Output the text graph padding before each diff line
Output the graph columns at the end of the commit message
Add a prefix output callback to diff output
Conflicts:
diff.c
Merge branch 'cb/ls-files-cdup'
* cb/ls-files-cdup:
ls-files: allow relative pathspec
quote.c: separate quoting and relative path generation
* cb/ls-files-cdup:
ls-files: allow relative pathspec
quote.c: separate quoting and relative path generation
Merge branch 'jc/t9129-any-utf8'
* jc/t9129-any-utf8:
t9129: fix UTF-8 locale detection
* jc/t9129-any-utf8:
t9129: fix UTF-8 locale detection
Merge branch 'rr/am-help'
* rr/am-help:
git am: Remove stray error message from sed
git am: Display some help text when patch is empty
git am: Set cmdline globally
* rr/am-help:
git am: Remove stray error message from sed
git am: Display some help text when patch is empty
git am: Set cmdline globally
Merge branch 'jn/rebase-cmdline-fix'
* jn/rebase-cmdline-fix:
rebase: improve error message when upstream argument is missing
* jn/rebase-cmdline-fix:
rebase: improve error message when upstream argument is missing
Merge branch 'ps/gitweb--browse-chrome'
* ps/gitweb--browse-chrome:
git-web--browse: Add support for google chrome and chromium
* ps/gitweb--browse-chrome:
git-web--browse: Add support for google chrome and chromium
Merge branch 'jk/am-skip-hint'
* jk/am-skip-hint:
git-am: suggest what to do with superfluous patches
* jk/am-skip-hint:
git-am: suggest what to do with superfluous patches
Merge branch 'jh/diff-index-line-abbrev'
* jh/diff-index-line-abbrev:
diff.c: Ensure "index $from..$to" line contains unambiguous SHA1s
Conflicts:
diff.c
* jh/diff-index-line-abbrev:
diff.c: Ensure "index $from..$to" line contains unambiguous SHA1s
Conflicts:
diff.c
Merge branch 'ab/maint-perl-use-instlibdir'
* ab/maint-perl-use-instlibdir:
Makefile: remove redundant munging of @@INSTLIBDIR@@
* ab/maint-perl-use-instlibdir:
Makefile: remove redundant munging of @@INSTLIBDIR@@
Merge branch 'ec/diff-noprefix-config'
* ec/diff-noprefix-config:
diff: add configuration option for disabling diff prefixes.
* ec/diff-noprefix-config:
diff: add configuration option for disabling diff prefixes.
Merge branch 'mg/status-b'
* mg/status-b:
Documentation+t5708: document and test status -s -b
Show branch information in short output of git status
* mg/status-b:
Documentation+t5708: document and test status -s -b
Show branch information in short output of git status