Merge branch 'jc/grep-c'
* jc/grep-c:
Split grep arguments in a way that does not requires to add /dev/null.
Documentation/git-config.txt: AsciiDoc tweak to avoid leading dot
Add test to check recent fix to "git add -u"
Documentation/git-archive.txt: a couple of clarifications.
Fix the rename detection limit checking
diff --no-index: do not forget to run diff_setup_done()
* jc/grep-c:
Split grep arguments in a way that does not requires to add /dev/null.
Documentation/git-config.txt: AsciiDoc tweak to avoid leading dot
Add test to check recent fix to "git add -u"
Documentation/git-archive.txt: a couple of clarifications.
Fix the rename detection limit checking
diff --no-index: do not forget to run diff_setup_done()
Split grep arguments in a way that does not requires to add /dev/null.
In order to (almost) always show the name of the file without
relying on "-H" option of GNU grep, we used to add /dev/null to
the argument list unless we are doing -l or -L. This caused
"/dev/null:0" to show up when -c is given in the output.
It is not enough to add -c to the set of options we do not pass
/dev/null for. When we have too many files, we invoke grep
multiple times and we need to avoid giving a widow filename to
the last invocation -- otherwise we will not see the name.
This keeps two filenames when the argv[] buffer is about to
overflow and we have not finished iterating over the index, so
that the last round will always have at least two paths to work
with (and not require /dev/null).
An obvious and the only exception is when there is only 1 file
that is given to the underlying grep, and in that case we avoid
passing /dev/null and let the external "grep -c" report only the
number of matches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to (almost) always show the name of the file without
relying on "-H" option of GNU grep, we used to add /dev/null to
the argument list unless we are doing -l or -L. This caused
"/dev/null:0" to show up when -c is given in the output.
It is not enough to add -c to the set of options we do not pass
/dev/null for. When we have too many files, we invoke grep
multiple times and we need to avoid giving a widow filename to
the last invocation -- otherwise we will not see the name.
This keeps two filenames when the argv[] buffer is about to
overflow and we have not finished iterating over the index, so
that the last round will always have at least two paths to work
with (and not require /dev/null).
An obvious and the only exception is when there is only 1 file
that is given to the underlying grep, and in that case we avoid
passing /dev/null and let the external "grep -c" report only the
number of matches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/git-config.txt: AsciiDoc tweak to avoid leading dot
Bram Schoenmakers noticed that git-config document was formatted
incorrectly. Depending on the version of AsciiDoc and docbook
toolchain, it is sometimes taken as a numbered example by AsciiDoc,
some other times passed intact to roff format to confuse "man".
Since we refer to the repository metadata directory as $GIT_DIR
elsewhere, work it around by using that symbolic name.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bram Schoenmakers noticed that git-config document was formatted
incorrectly. Depending on the version of AsciiDoc and docbook
toolchain, it is sometimes taken as a numbered example by AsciiDoc,
some other times passed intact to roff format to confuse "man".
Since we refer to the repository metadata directory as $GIT_DIR
elsewhere, work it around by using that symbolic name.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test to check recent fix to "git add -u"
An earlier commit fixed type-change case in "git add -u".
This adds a test to make sure we do not introduce regression.
At the same time, it fixes a stupid typo in the error message.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit fixed type-change case in "git add -u".
This adds a test to make sure we do not introduce regression.
At the same time, it fixes a stupid typo in the error message.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/git-archive.txt: a couple of clarifications.
The description of the option gave impression that there
were several formats available by using three dots. There are
no other formats than tar and gzip currently supported.
Clarify that the archive goes to the standard output.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of the option gave impression that there
were several formats available by using three dots. There are
no other formats than tar and gzip currently supported.
Clarify that the archive goes to the standard output.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the rename detection limit checking
This adds more proper rename detection limits. Instead of just checking
the limit against the number of potential rename destinations, we verify
that the rename matrix (which is what really matters) doesn't grow
ridiculously large, and we also make sure that we don't overflow when
doing the matrix size calculation.
This also changes the default limits from unlimited, to a rename matrix
that is limited to 100 entries on a side. You can raise it with the config
entry, or by using the "-l<n>" command line flag, but at least the default
is now a sane number that avoids spending lots of time (and memory) in
situations that likely don't merit it.
The choice of default value is of course very debatable. Limiting the
rename matrix to a 100x100 size will mean that even if you have just one
obvious rename, but you also create (or delete) 10,000 files, the rename
matrix will be so big that we disable the heuristics. Sounds reasonable to
me, but let's see if people hit this (and, perhaps more importantly,
actually *care*) in real life.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds more proper rename detection limits. Instead of just checking
the limit against the number of potential rename destinations, we verify
that the rename matrix (which is what really matters) doesn't grow
ridiculously large, and we also make sure that we don't overflow when
doing the matrix size calculation.
This also changes the default limits from unlimited, to a rename matrix
that is limited to 100 entries on a side. You can raise it with the config
entry, or by using the "-l<n>" command line flag, but at least the default
is now a sane number that avoids spending lots of time (and memory) in
situations that likely don't merit it.
The choice of default value is of course very debatable. Limiting the
rename matrix to a 100x100 size will mean that even if you have just one
obvious rename, but you also create (or delete) 10,000 files, the rename
matrix will be so big that we disable the heuristics. Sounds reasonable to
me, but let's see if people hit this (and, perhaps more importantly,
actually *care*) in real life.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff --no-index: do not forget to run diff_setup_done()
Code inspection by Linus found this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code inspection by Linus found this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
git-format-patch --in-reply-to: accept <message@id> with angle brackets
git-add -u: do not barf on type changes
Remove duplicate note about removing commits with git-filter-branch
git-clone: improve error message if curl program is missing or not executable
hooks--update: Explicitly check for all zeros for a deleted ref.
* maint:
git-format-patch --in-reply-to: accept <message@id> with angle brackets
git-add -u: do not barf on type changes
Remove duplicate note about removing commits with git-filter-branch
git-clone: improve error message if curl program is missing or not executable
hooks--update: Explicitly check for all zeros for a deleted ref.
git-format-patch --in-reply-to: accept <message@id> with angle brackets
This will allow RFC-literate users to say:
format-patch --in-reply-to='<message.id@site.name>'
without forcing them to strip the surrounding angle brackets
like this:
format-patch --in-reply-to='message.id@site.name'
We accept both forms, and the latter gets necessary < and >
around it as before.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will allow RFC-literate users to say:
format-patch --in-reply-to='<message.id@site.name>'
without forcing them to strip the surrounding angle brackets
like this:
format-patch --in-reply-to='message.id@site.name'
We accept both forms, and the latter gets necessary < and >
around it as before.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-add -u: do not barf on type changes
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove duplicate note about removing commits with git-filter-branch
A duplicate of an already existing section in the documentation of
git-filter-branch was added in commit
f95eef15f2f8a336b9a42749f5458c841a5a5d63.
This patch removes that redundant section.
Signed-off-by: Ulrik Sverdrup <ulrik.sverdrup@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A duplicate of an already existing section in the documentation of
git-filter-branch was added in commit
f95eef15f2f8a336b9a42749f5458c841a5a5d63.
This patch removes that redundant section.
Signed-off-by: Ulrik Sverdrup <ulrik.sverdrup@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clone: improve error message if curl program is missing or not executable
If the curl program is not available (or not executable), and git clone is
started to clone a repository through http, this is the output
Initialized empty Git repository in /tmp/puppet/.git/
/usr/bin/git-clone: line 37: curl: command not found
Cannot get remote repository information.
Perhaps git-update-server-info needs to be run there?
This patch improves the error message by checking the return code when
running curl to exit immediately if it's 126 or 127; the error output now
is
Initialized empty Git repository in /tmp/puppet/.git/
/usr/bin/git-clone: line 37: curl: command not found
Adrian Bridgett noticed this and reported through
http://bugs.debian.org/440976
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the curl program is not available (or not executable), and git clone is
started to clone a repository through http, this is the output
Initialized empty Git repository in /tmp/puppet/.git/
/usr/bin/git-clone: line 37: curl: command not found
Cannot get remote repository information.
Perhaps git-update-server-info needs to be run there?
This patch improves the error message by checking the return code when
running curl to exit immediately if it's 126 or 127; the error output now
is
Initialized empty Git repository in /tmp/puppet/.git/
/usr/bin/git-clone: line 37: curl: command not found
Adrian Bridgett noticed this and reported through
http://bugs.debian.org/440976
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git.el: Allow the add and remove commands to be applied to ignored files.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git.el: Allow selecting whether to display uptodate/unknown/ignored files.
The default behavior for each state can be customized, and it can also
be toggled directly from the status buffer.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default behavior for each state can be customized, and it can also
be toggled directly from the status buffer.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git.el: Keep the status buffer sorted by filename.
This makes insertions and updates much more efficient.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes insertions and updates much more efficient.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
hooks--update: Explicitly check for all zeros for a deleted ref.
The previous check caused the hook to reject as unannotated any tag
whose SHA1 starts with a zero.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous check caused the hook to reject as unannotated any tag
whose SHA1 starts with a zero.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
stash: end index commit log with a newline
git-commit: Disallow amend if it is going to produce an empty non-merge commit
git-send-email.perl: Add angle brackets to In-Reply-To if necessary
Fix a test failure (t9500-*.sh) on cygwin
* maint:
stash: end index commit log with a newline
git-commit: Disallow amend if it is going to produce an empty non-merge commit
git-send-email.perl: Add angle brackets to In-Reply-To if necessary
Fix a test failure (t9500-*.sh) on cygwin
Merge branch 'sp/maint-no-thin' into maint
* sp/maint-no-thin:
Make --no-thin the default in git-push to save server resources
* sp/maint-no-thin:
Make --no-thin the default in git-push to save server resources
Define NO_MEMMEM of FreeBSD as it lacks the function
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
stash: end index commit log with a newline
There was no newline at the end of the index commit message, putting
the shell prompt at its end after a 'git cat-file commit $id'. This is
similar to what was fixed in 843103d69388a5c74ed99753e1c162a66835b04d.
Signed-off-by: Jean-Luc Herren <jlh@gmx.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no newline at the end of the index commit message, putting
the shell prompt at its end after a 'git cat-file commit $id'. This is
similar to what was fixed in 843103d69388a5c74ed99753e1c162a66835b04d.
Signed-off-by: Jean-Luc Herren <jlh@gmx.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-commit: Disallow amend if it is going to produce an empty non-merge commit
Right now one can amend the last non-merge commit using a dirty index
and in the process maybe cause the last commit to have the same tree
as its parent. In such a case one would want to discard the last commit
instead of amending it.
This reverts commit 8588452ceb78b1da17652ba03f9942ef740e07ea.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now one can amend the last non-merge commit using a dirty index
and in the process maybe cause the last commit to have the same tree
as its parent. In such a case one would want to discard the last commit
instead of amending it.
This reverts commit 8588452ceb78b1da17652ba03f9942ef740e07ea.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-send-email.perl: Add angle brackets to In-Reply-To if necessary
Although message-id by defintion should have surrounding angle
brackets, there is no point forcing people to type them in.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although message-id by defintion should have surrounding angle
brackets, there is no point forcing people to type them in.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a test failure (t9500-*.sh) on cygwin
On filesystems where it is appropriate to set core.filemode
to false, test 29 ("commitdiff(0): mode change") fails when
git-commit does not notice a file (execute) permission change.
A fix requires noting the new file execute permission in the
index with a "git update-index --chmod=+x", prior to the commit.
Add a function (note_chmod) which implements this idea, and
insert a call in each test that modifies the x permission.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On filesystems where it is appropriate to set core.filemode
to false, test 29 ("commitdiff(0): mode change") fails when
git-commit does not notice a file (execute) permission change.
A fix requires noting the new file execute permission in the
index with a "git update-index --chmod=+x", prior to the commit.
Add a function (note_chmod) which implements this idea, and
insert a call in each test that modifies the x permission.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'rs/archive'
* rs/archive:
archive - leakfix for format_subst()
Define NO_MEMMEM on Darwin as it lacks the function
archive: rename attribute specfile to export-subst
archive: specfile syntax change: "$Format:%PLCHLDR$" instead of just "%PLCHLDR" (take 2)
add memmem()
Remove unused function convert_sha1_file()
archive: specfile support (--pretty=format: in archive files)
Export format_commit_message()
* rs/archive:
archive - leakfix for format_subst()
Define NO_MEMMEM on Darwin as it lacks the function
archive: rename attribute specfile to export-subst
archive: specfile syntax change: "$Format:%PLCHLDR$" instead of just "%PLCHLDR" (take 2)
add memmem()
Remove unused function convert_sha1_file()
archive: specfile support (--pretty=format: in archive files)
Export format_commit_message()
archive - leakfix for format_subst()
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'sp/maint-no-thin'
* sp/maint-no-thin:
Make --no-thin the default in git-push to save server resources
fix doc for --compression argument to pack-objects
git-tag -s must fail if gpg cannot sign the tag.
* sp/maint-no-thin:
Make --no-thin the default in git-push to save server resources
fix doc for --compression argument to pack-objects
git-tag -s must fail if gpg cannot sign the tag.
Make --no-thin the default in git-push to save server resources
1) pushes happen less often than fetches, so the bandwidth saving is
much less visible in that case overall.
2) thin packs have to be complemented with missing delta bases to be
valid, so many received thin packs will take more disk space.
3) the bother of repacking should be distributed amongst "clients"
i.e. fetchers and pushers as much as possible, and not the server
being fetched or pushed, to keep disk and CPU usage low on the
server.
This is why a fetch should get thin packs but a push should not.
Both Nico and I have been assuming that --no-thin was the default
behavior of git-push ever since Nico introduced --fix-thin into the
index-pack process, which allowed fetch and receive-pack to avoid
exploding packfiles received during transfer. This patch finally
makes it so.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1) pushes happen less often than fetches, so the bandwidth saving is
much less visible in that case overall.
2) thin packs have to be complemented with missing delta bases to be
valid, so many received thin packs will take more disk space.
3) the bother of repacking should be distributed amongst "clients"
i.e. fetchers and pushers as much as possible, and not the server
being fetched or pushed, to keep disk and CPU usage low on the
server.
This is why a fetch should get thin packs but a push should not.
Both Nico and I have been assuming that --no-thin was the default
behavior of git-push ever since Nico introduced --fix-thin into the
index-pack process, which allowed fetch and receive-pack to avoid
exploding packfiles received during transfer. This patch finally
makes it so.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fix doc for --compression argument to pack-objects
Remove obsolete details (core.legacyheaders is always true now).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove obsolete details (core.legacyheaders is always true now).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-tag -s must fail if gpg cannot sign the tag.
Most of this patch code and message was written by Shawn O. Pearce.
I made some tests to know what the problem was, and then I changed
the code related with the SIGPIPE signal.
If the user has misconfigured `user.signingkey` in their .git/config
or just doesn't have any secret keys on their keyring and they ask
for a signed tag with `git tag -s` we better make sure the resulting
tag was actually signed by gpg.
Prior versions of builtin git-tag allowed this failure to slip
by without error as they were not checking the return value of
the finish_command() so they did not notice when gpg exited with
an error exit status. They also did not fail if gpg produced an
empty output or if read_in_full received an error from the read
system call while trying to read the pipe back from gpg.
Finally, we did not actually honor any return value from the do_sign
function as it returns ssize_t but was being stored into an unsigned
long. This caused the compiler to optimize out the die condition,
allowing git-tag to continue along and create the tag object.
However, when gpg gets a wrong username, it exits before any read was done
and then the writing process receives SIGPIPE and program is terminated.
By ignoring this signal, anyway, the function write_or_die gets EPIPE from
write_in_full and exits returning 0 to the system without a message.
Here we better call to write_in_full directly so we can fail
printing a message and return safely to the caller.
With these issues fixed `git-tag -s` will now fail to create the
tag and will report a non-zero exit status to its caller, thereby
allowing automated helper scripts to detect (and recover from)
failure if gpg is not working properly.
Proposed-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of this patch code and message was written by Shawn O. Pearce.
I made some tests to know what the problem was, and then I changed
the code related with the SIGPIPE signal.
If the user has misconfigured `user.signingkey` in their .git/config
or just doesn't have any secret keys on their keyring and they ask
for a signed tag with `git tag -s` we better make sure the resulting
tag was actually signed by gpg.
Prior versions of builtin git-tag allowed this failure to slip
by without error as they were not checking the return value of
the finish_command() so they did not notice when gpg exited with
an error exit status. They also did not fail if gpg produced an
empty output or if read_in_full received an error from the read
system call while trying to read the pipe back from gpg.
Finally, we did not actually honor any return value from the do_sign
function as it returns ssize_t but was being stored into an unsigned
long. This caused the compiler to optimize out the die condition,
allowing git-tag to continue along and create the tag object.
However, when gpg gets a wrong username, it exits before any read was done
and then the writing process receives SIGPIPE and program is terminated.
By ignoring this signal, anyway, the function write_or_die gets EPIPE from
write_in_full and exits returning 0 to the system without a message.
Here we better call to write_in_full directly so we can fail
printing a message and return safely to the caller.
With these issues fixed `git-tag -s` will now fail to create the
tag and will report a non-zero exit status to its caller, thereby
allowing automated helper scripts to detect (and recover from)
failure if gpg is not working properly.
Proposed-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
git-svn: understand grafts when doing dcommit
git-diff: don't squelch the new SHA1 in submodule diffs
git-svn: fix "Malformed network data" with svn:// servers
(cvs|svn)import: Ask git-tag to overwrite old tags.
Documentation / grammer nit
* maint:
git-svn: understand grafts when doing dcommit
git-diff: don't squelch the new SHA1 in submodule diffs
git-svn: fix "Malformed network data" with svn:// servers
(cvs|svn)import: Ask git-tag to overwrite old tags.
Documentation / grammer nit
git-svn: understand grafts when doing dcommit
Use the rev-list --parents functionality to read the parents
of the commit. cat-file only shows the raw object with the
original parents and doesn't take into account grafts; so
we'll rely on rev-list machinery for the smarts here.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the rev-list --parents functionality to read the parents
of the commit. cat-file only shows the raw object with the
original parents and doesn't take into account grafts; so
we'll rely on rev-list machinery for the smarts here.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-diff: don't squelch the new SHA1 in submodule diffs
The code to squelch empty diffs introduced by commit
fb13227e089f22dc31a3b1624559153821056848 would inadvertently
populate filespec "two" of a submodule change using the uninitialized
(null) SHA1, thereby replacing the submodule SHA1 by 0{40} in the output.
This change teaches diffcore_skip_stat_unmatch to handle
submodule changes correctly.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to squelch empty diffs introduced by commit
fb13227e089f22dc31a3b1624559153821056848 would inadvertently
populate filespec "two" of a submodule change using the uninitialized
(null) SHA1, thereby replacing the submodule SHA1 by 0{40} in the output.
This change teaches diffcore_skip_stat_unmatch to handle
submodule changes correctly.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define NO_MEMMEM on Darwin as it lacks the function
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: fix "Malformed network data" with svn:// servers
We have a workaround for the reparent function not working
correctly on the SVN native protocol servers. This workaround
opens a new connection (SVN::Ra object) to the new
URL/directory.
Since libsvn appears limited to only supporting one connection
at a time, this workaround invalidates the Git::SVN::Ra object
that is $self inside gs_fetch_loop_common(). So we need to
restart that connection once all the fetching is done for each
loop iteration to be able to run get_log() successfully.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a workaround for the reparent function not working
correctly on the SVN native protocol servers. This workaround
opens a new connection (SVN::Ra object) to the new
URL/directory.
Since libsvn appears limited to only supporting one connection
at a time, this workaround invalidates the Git::SVN::Ra object
that is $self inside gs_fetch_loop_common(). So we need to
restart that connection once all the fetching is done for each
loop iteration to be able to run get_log() successfully.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(cvs|svn)import: Ask git-tag to overwrite old tags.
If the tag was moved in CVS or SVN history, it will be moved in the
imported history as well. Tag history is not tracked.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the tag was moved in CVS or SVN history, it will be moved in the
imported history as well. Tag history is not tracked.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-rebase: fix -C option
The extra shift here causes failure to parse any commandline including
the -C option.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The extra shift here causes failure to parse any commandline including
the -C option.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-rebase: support --whitespace=<option>
Pass --whitespace=<option> to git-apply. Since git-apply and git-am
expect this, I'm always surprised when I try to give it to git-rebase
and it doesn't work.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass --whitespace=<option> to git-apply. Since git-apply and git-am
expect this, I'm always surprised when I try to give it to git-rebase
and it doesn't work.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation / grammer nit
If we're counting, a smaller number is 'fewer' not 'less'
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we're counting, a smaller number is 'fewer' not 'less'
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
archive: rename attribute specfile to export-subst
As suggested by Junio and Johannes, change the name of the former
attribute specfile to export-subst to indicate its function rather
than purpose and to make clear that it is not applied to working tree
files.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Junio and Johannes, change the name of the former
attribute specfile to export-subst to indicate its function rather
than purpose and to make clear that it is not applied to working tree
files.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
archive: specfile syntax change: "$Format:%PLCHLDR$" instead of just "%PLCHLDR" (take 2)
As suggested by Johannes, --pretty=format: placeholders in specfiles
need to be wrapped in $Format:...$ now. This syntax change restricts
the expansion of placeholders and makes it easier to use with files
that contain non-placeholder percent signs.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Johannes, --pretty=format: placeholders in specfiles
need to be wrapped in $Format:...$ now. This syntax change restricts
the expansion of placeholders and makes it easier to use with files
that contain non-placeholder percent signs.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
add memmem()
memmem() is a nice GNU extension for searching a length limited string
in another one.
This compat version is based on the version found in glibc 2.2 (GPL 2);
I only removed the optimization of checking the first char by hand, and
generally tried to keep the code simple. We can add it back if memcmp
shows up high in a profile, but for now I prefer to keep it (almost
trivially) simple.
Since I don't really know which platforms beside those with a glibc
have their own memmem(), I used a heuristic: if NO_STRCASESTR is set,
then NO_MEMMEM is set, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
memmem() is a nice GNU extension for searching a length limited string
in another one.
This compat version is based on the version found in glibc 2.2 (GPL 2);
I only removed the optimization of checking the first char by hand, and
generally tried to keep the code simple. We can add it back if memcmp
shows up high in a profile, but for now I prefer to keep it (almost
trivially) simple.
Since I don't really know which platforms beside those with a glibc
have their own memmem(), I used a heuristic: if NO_STRCASESTR is set,
then NO_MEMMEM is set, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'master' of git://repo.or.cz/git/git-p4
* 'master' of git://repo.or.cz/git/git-p4:
git-p4: Added support for automatically importing newly appearing perforce branches.
git-p4: Cleanup; moved the (duplicated) code for turning a branch into a git ref (for example foo -> refs/remotes/p4/<project>/foo) into a separate method.
git-p4: Cleanup; moved the code for the initial #head or revision import into a separate function, out of P4Sync.run.
git-p4: Cleanup; Turn self.revision into a function local variable (it's not used anywhere outside the function).
git-p4: Cleanup; moved the code to import a list of p4 changes using fast-import into a separate member function of P4Sync.
git-p4: Cleanup; moved the code for getting a sorted list of p4 changes for a list of given depot paths into a standalone method.
git-p4: After submission to p4 always synchronize from p4 again (into refs/remotes). Whether to rebase HEAD or not is still left as question to the end-user.
git-p4: Always call 'p4 sync ...' before submitting to Perforce.
* 'master' of git://repo.or.cz/git/git-p4:
git-p4: Added support for automatically importing newly appearing perforce branches.
git-p4: Cleanup; moved the (duplicated) code for turning a branch into a git ref (for example foo -> refs/remotes/p4/<project>/foo) into a separate method.
git-p4: Cleanup; moved the code for the initial #head or revision import into a separate function, out of P4Sync.run.
git-p4: Cleanup; Turn self.revision into a function local variable (it's not used anywhere outside the function).
git-p4: Cleanup; moved the code to import a list of p4 changes using fast-import into a separate member function of P4Sync.
git-p4: Cleanup; moved the code for getting a sorted list of p4 changes for a list of given depot paths into a standalone method.
git-p4: After submission to p4 always synchronize from p4 again (into refs/remotes). Whether to rebase HEAD or not is still left as question to the end-user.
git-p4: Always call 'p4 sync ...' before submitting to Perforce.
Merge branch 'maint'
* maint:
Include a git-push example for creating a remote branch
Cleanup unnecessary file modifications in t1400-update-ref
Makefile: Add cache-tree.h to the headers list
Don't allow contrib/workdir/git-new-workdir to trash existing dirs
git-apply: do not read past the end of buffer
* maint:
Include a git-push example for creating a remote branch
Cleanup unnecessary file modifications in t1400-update-ref
Makefile: Add cache-tree.h to the headers list
Don't allow contrib/workdir/git-new-workdir to trash existing dirs
git-apply: do not read past the end of buffer
Include a git-push example for creating a remote branch
Many users get confused when `git push origin master:foo` works
when foo already exists on the remote repository but are confused
when foo doesn't exist as a branch and this form does not create
the branch foo.
This new example highlights the trick of including refs/heads/
in front of the desired branch name to create a branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many users get confused when `git push origin master:foo` works
when foo already exists on the remote repository but are confused
when foo doesn't exist as a branch and this form does not create
the branch foo.
This new example highlights the trick of including refs/heads/
in front of the desired branch name to create a branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cleanup unnecessary file modifications in t1400-update-ref
Kristian Høgsberg pointed out that the two file modifications
we were doing during the 'creating initial files' step are not even
used within the test suite. This was actually confusing as we do
not even need these changes for the tests to pass. All that really
matters here is the specific commit dates are used so that these
appear in the branch's reflog, and that the dates are different so
that the branch will update when asked and the reflog entry is
also updated. There is no need for the file modification.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kristian Høgsberg pointed out that the two file modifications
we were doing during the 'creating initial files' step are not even
used within the test suite. This was actually confusing as we do
not even need these changes for the tests to pass. All that really
matters here is the specific commit dates are used so that these
appear in the branch's reflog, and that the dates are different so
that the branch will update when asked and the reflog entry is
also updated. There is no need for the file modification.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: Add cache-tree.h to the headers list
The dependency was missing.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The dependency was missing.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't allow contrib/workdir/git-new-workdir to trash existing dirs
Recently I found that doing a sequence like the following:
git-new-workdir a b
...
git-new-workdir a b
by accident will cause a (and now also b) to have an infinite cycle
in its refs directory. This is caused by git-new-workdir trying
to create the "refs" symlink over again, only during the second
time it is being created within a's refs directory and is now also
pointing back at a's refs.
This causes confusion in git as suddenly branches are named things
like "refs/refs/refs/refs/refs/refs/refs/heads/foo" instead of the
more commonly accepted "refs/heads/foo". Plenty of commands start
to see ambiguous ref names and others just take ages to compute.
git-clone has the same safety check, so git-new-workdir should
behave just like it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently I found that doing a sequence like the following:
git-new-workdir a b
...
git-new-workdir a b
by accident will cause a (and now also b) to have an infinite cycle
in its refs directory. This is caused by git-new-workdir trying
to create the "refs" symlink over again, only during the second
time it is being created within a's refs directory and is now also
pointing back at a's refs.
This causes confusion in git as suddenly branches are named things
like "refs/refs/refs/refs/refs/refs/refs/heads/foo" instead of the
more commonly accepted "refs/heads/foo". Plenty of commands start
to see ambiguous ref names and others just take ages to compute.
git-clone has the same safety check, so git-new-workdir should
behave just like it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-apply: do not read past the end of buffer
When the preimage we are patching is shorter than what the patch
text expects, we tried to match the buffer contents at the
"original" line with the fragment in full, without checking we
have enough data to match in the preimage. This caused the size
of a later memmove() to wrap around and attempt to scribble
almost the entire address space. Not good.
The code that follows the part this patch touches tries to match
the fragment with line offsets. Curiously, that code does not
have the problem --- it guards against reading past the end of
the preimage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the preimage we are patching is shorter than what the patch
text expects, we tried to match the buffer contents at the
"original" line with the fragment in full, without checking we
have enough data to match in the preimage. This caused the size
of a later memmove() to wrap around and attempt to scribble
almost the entire address space. Not good.
The code that follows the part this patch touches tries to match
the fragment with line offsets. Curiously, that code does not
have the problem --- it guards against reading past the end of
the preimage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'ds/sendmail'
* ds/sendmail:
send-email: Add support for SSL and SMTP-AUTH
* ds/sendmail:
send-email: Add support for SSL and SMTP-AUTH
Function for updating refs.
A function intended to be called from builtins updating refs
by locking them before write, specially those that came from
scripts using "git update-ref".
[jc: with minor fixups]
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A function intended to be called from builtins updating refs
by locking them before write, specially those that came from
scripts using "git update-ref".
[jc: with minor fixups]
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove unused function convert_sha1_file()
convert_sha1_file() became unused by the previous patch -- remove it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
convert_sha1_file() became unused by the previous patch -- remove it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
archive: specfile support (--pretty=format: in archive files)
Add support for a new attribute, specfile. Files marked as being
specfiles are expanded by git-archive when they are written to an
archive. It has no effect on worktree files. The same placeholders
as those for the option --pretty=format: of git-log et al. can be
used.
The attribute is useful for creating auto-updating specfiles. It is
limited by the underlying function format_commit_message(), though.
E.g. currently there is no placeholder for git-describe like output,
and expanded specfiles can't contain NUL bytes. That can be fixed
in format_commit_message() later and will then benefit users of
git-log, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for a new attribute, specfile. Files marked as being
specfiles are expanded by git-archive when they are written to an
archive. It has no effect on worktree files. The same placeholders
as those for the option --pretty=format: of git-log et al. can be
used.
The attribute is useful for creating auto-updating specfiles. It is
limited by the underlying function format_commit_message(), though.
E.g. currently there is no placeholder for git-describe like output,
and expanded specfiles can't contain NUL bytes. That can be fixed
in format_commit_message() later and will then benefit users of
git-log, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Export format_commit_message()
Drop the parameter "msg" of format_commit_message() (as it can be
inferred from the parameter "commit"), add a parameter "template"
in order to avoid accessing the static variable user_format
directly and export the result.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop the parameter "msg" of format_commit_message() (as it can be
inferred from the parameter "commit"), add a parameter "template"
in order to avoid accessing the static variable user_format
directly and export the result.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4: Added support for automatically importing newly appearing perforce branches.
If a change in a p4 "branch" appears that hasn't seen any previous commit and
that has a known branch mapping we now try to import it properly. First we
find the p4 change of the source branch that the new p4 branch is based on. Then
we using git rev-list --bisect to locate the corresponding git commit to that change.
Finally we import all changes in the new p4 branch up to the current change and resume
with the regular import.
Signed-off-by: Simon Hausmann <simon@lst.de>
If a change in a p4 "branch" appears that hasn't seen any previous commit and
that has a known branch mapping we now try to import it properly. First we
find the p4 change of the source branch that the new p4 branch is based on. Then
we using git rev-list --bisect to locate the corresponding git commit to that change.
Finally we import all changes in the new p4 branch up to the current change and resume
with the regular import.
Signed-off-by: Simon Hausmann <simon@lst.de>
git-p4: Cleanup; moved the (duplicated) code for turning a branch into a git ref (for example foo -> refs/remotes/p4/<project>/foo) into a separate method.
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Simon Hausmann <simon@lst.de>
16 years agogit-p4: Cleanup; moved the code for the initial #head or revision import into a separ...
git-p4: Cleanup; moved the code for the initial #head or revision import into a separate function, out of P4Sync.run.
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Simon Hausmann <simon@lst.de>
git-p4: Cleanup; Turn self.revision into a function local variable (it's not used anywhere outside the function).
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Simon Hausmann <simon@lst.de>
git-p4: Cleanup; moved the code to import a list of p4 changes using fast-import into a separate member function of P4Sync.
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Simon Hausmann <simon@lst.de>
git-p4: Cleanup; moved the code for getting a sorted list of p4 changes for a list of given depot paths into a standalone method.
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Simon Hausmann <simon@lst.de>
git-p4: After submission to p4 always synchronize from p4 again (into refs/remotes). Whether to rebase HEAD or not is still left as question to the end-user.
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Simon Hausmann <simon@lst.de>
git-p4: Always call 'p4 sync ...' before submitting to Perforce.
Acked-by: Marius Storm-Olsen <marius@trolltech.com>
Acked-by: Thiago Macieira <thiago@kde.org>
Acked-by: Marius Storm-Olsen <marius@trolltech.com>
Acked-by: Thiago Macieira <thiago@kde.org>
send-email: Add support for SSL and SMTP-AUTH
Allows username and password to be given using --smtp-user
and --smtp-pass. SSL use is flagged by --smtp-ssl. These are
backed by corresponding defaults in the git configuration file.
This implements Junio's 'mail identity' suggestion in a slightly
more generalised manner. --identity=$identity, backed by
sendemail.identity indicates that the configuration subsection
[sendemail "$identity"] should take priority over the [sendemail]
section for all configuration values.
Signed-off-by: Douglas Stockwell <doug@11011.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows username and password to be given using --smtp-user
and --smtp-pass. SSL use is flagged by --smtp-ssl. These are
backed by corresponding defaults in the git configuration file.
This implements Junio's 'mail identity' suggestion in a slightly
more generalised manner. --identity=$identity, backed by
sendemail.identity indicates that the configuration subsection
[sendemail "$identity"] should take priority over the [sendemail]
section for all configuration values.
Signed-off-by: Douglas Stockwell <doug@11011.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start 1.5.4 cycle
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT 1.5.3.1: obsolete git-p4 in RPM spec file.
HPA noticed that yum does not like the newer git RPM set; it turns out
that we do not ship git-p4 anymore but existing installations do not
realize the package is gone if we do not tell anything about it.
David Kastrup suggests using Obsoletes in the spec file of the new
RPM to replace the old package, so here is a try.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HPA noticed that yum does not like the newer git RPM set; it turns out
that we do not ship git-p4 anymore but existing installations do not
realize the package is gone if we do not tell anything about it.
David Kastrup suggests using Obsoletes in the spec file of the new
RPM to replace the old package, so here is a try.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Typofix: 1.5.3 release notes
GIT 1.5.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jp/send-email-cc'
* jp/send-email-cc:
git-send-email --cc-cmd
* jp/send-email-cc:
git-send-email --cc-cmd
Mention -m as an abbreviation for --merge
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update my contact address as the maintainer.
Documentation: minor AsciiDoc mark-up fixes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
URL: allow port specification in ssh:// URLs
Allow port specification in ssh:// URLs in the
usual notation:
ssh://[user@]host.domain[:<port>]/<path>
This allows git to be used over ssh-tunneling
networks.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow port specification in ssh:// URLs in the
usual notation:
ssh://[user@]host.domain[:<port>]/<path>
This allows git to be used over ssh-tunneling
networks.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid one-or-more (\+) non BRE in sed scripts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase -m: Fix incorrect short-logs of already applied commits.
When a topic branch is rebased, some of whose commits are already
cherry-picked upstream:
o--X--A--B--Y <- master
\
A--B--Z <- topic
then 'git rebase -m master' would report:
Already applied: 0001 Y
Already applied: 0002 Y
With this fix it reports the expected:
Already applied: 0001 A
Already applied: 0002 B
As an added bonus, this change also avoids 'echo' of a commit message,
which might contain escapements.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a topic branch is rebased, some of whose commits are already
cherry-picked upstream:
o--X--A--B--Y <- master
\
A--B--Z <- topic
then 'git rebase -m master' would report:
Already applied: 0001 Y
Already applied: 0002 Y
With this fix it reports the expected:
Already applied: 0001 A
Already applied: 0002 B
As an added bonus, this change also avoids 'echo' of a commit message,
which might contain escapements.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-diff: resurrect the traditional empty "diff --git" behaviour
The warning message to suggest "Consider running git-status" from
"git-diff" that we experimented with during the 1.5.3 cycle turns
out to be a bad idea. It robbed cache-dirty information from people
who valued it, while still asking users to run "update-index --refresh".
It was hoped that the new behaviour would at least have some educational
value, but not showing the cache-dirty paths like before meant that the
user would not even know easily which paths were cache-dirty, and it
made the need to refresh the index look like even more unnecessary chore.
This commit reinstates the traditional behaviour, but with a twist.
By default, the empty "diff --git" output is totally squelched out
from "git diff" output. At the end of the command, it automatically
runs "update-index --refresh" as needed, without even bothering the
user. In other words, people who do not care about the cache-dirtyness
do not even have to see the warning.
The traditional behaviour to see the stat-dirty output and to bypassing
the overhead of content comparison can be specified by setting the
configuration variable diff.autorefreshindex to false.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The warning message to suggest "Consider running git-status" from
"git-diff" that we experimented with during the 1.5.3 cycle turns
out to be a bad idea. It robbed cache-dirty information from people
who valued it, while still asking users to run "update-index --refresh".
It was hoped that the new behaviour would at least have some educational
value, but not showing the cache-dirty paths like before meant that the
user would not even know easily which paths were cache-dirty, and it
made the need to refresh the index look like even more unnecessary chore.
This commit reinstates the traditional behaviour, but with a twist.
By default, the empty "diff --git" output is totally squelched out
from "git diff" output. At the end of the command, it automatically
runs "update-index --refresh" as needed, without even bothering the
user. In other words, people who do not care about the cache-dirtyness
do not even have to see the warning.
The traditional behaviour to see the stat-dirty output and to bypassing
the overhead of content comparison can be specified by setting the
configuration variable diff.autorefreshindex to false.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-tag: Fix -l option to use better shell style globs.
This patch removes certain behaviour of "git tag -l foo", currently
listing every tag name having "foo" as a substring. The same
thing now could be achieved doing "git tag -l '*foo*'".
This feature was added recently when git-tag.sh got the -n option
for showing tag annotations, because that commit also replaced the
old "grep pattern" behaviour with a more preferable "shell pattern"
behaviour (although slightly modified as you can see).
Thus, the following builtin-tag.c implemented it in order to
ensure that tests were passing unchanged with both programs.
Since common "shell patterns" match names with a given substring
_only_ when * is inserted before and after (as in "*substring*"), and
the "plain" behaviour cannot be achieved easily with the current
implementation, this is mostly the right thing to do, in order to
make it more flexible and consistent.
Tests for "git tag" were also changed to reflect this.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch removes certain behaviour of "git tag -l foo", currently
listing every tag name having "foo" as a substring. The same
thing now could be achieved doing "git tag -l '*foo*'".
This feature was added recently when git-tag.sh got the -n option
for showing tag annotations, because that commit also replaced the
old "grep pattern" behaviour with a more preferable "shell pattern"
behaviour (although slightly modified as you can see).
Thus, the following builtin-tag.c implemented it in order to
ensure that tests were passing unchanged with both programs.
Since common "shell patterns" match names with a given substring
_only_ when * is inserted before and after (as in "*substring*"), and
the "plain" behaviour cannot be achieved easily with the current
implementation, this is mostly the right thing to do, in order to
make it more flexible and consistent.
Tests for "git tag" were also changed to reflect this.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: fix dcommit clobbering upstream when committing multiple changes
Although dcommit could detect if the first commit in the series
would conflict with the HEAD revision in SVN, it could not
detect conflicts in further commits it made.
Now we rebase each uncommitted change after each revision is
committed to SVN to ensure that we are up-to-date. git-rebase
will bail out on conflict errors if our next change cannot be
applied and committed to SVN cleanly, preventing accidental
clobbering of changes on the SVN-side.
--no-rebase users will have trouble with this, and are thus
warned if they are committing more than one commit. Fixing this
for (hopefully uncommon) --no-rebase users would be more complex
and will probably happen at a later date.
Thanks to David Watson for finding this and the original test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although dcommit could detect if the first commit in the series
would conflict with the HEAD revision in SVN, it could not
detect conflicts in further commits it made.
Now we rebase each uncommitted change after each revision is
committed to SVN to ensure that we are up-to-date. git-rebase
will bail out on conflict errors if our next change cannot be
applied and committed to SVN cleanly, preventing accidental
clobbering of changes on the SVN-side.
--no-rebase users will have trouble with this, and are thus
warned if they are committing more than one commit. Fixing this
for (hopefully uncommon) --no-rebase users would be more complex
and will probably happen at a later date.
Thanks to David Watson for finding this and the original test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: Protect against "diff.color = true".
If the configuration of the user has "diff.color = true", the
output from "log" we invoke internally added color codes, which
broke the parser.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
If the configuration of the user has "diff.color = true", the
output from "log" we invoke internally added color codes, which
broke the parser.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
filter-branch: introduce convenience function "skip_commit"
With this function, a commit filter can leave out unwanted commits
(such as temporary commits). It does _not_ undo the changeset
corresponding to that commit, but it _skips_ the revision. IOW
no tree object is changed by this.
If you like to commit early and often, but want to filter out all
intermediate commits, marked by "@@@" in the commit message, you can
now do this with
git filter-branch --commit-filter '
if git cat-file commit $GIT_COMMIT | grep '@@@' > /dev/null;
then
skip_commit "$@";
else
git commit-tree "$@";
fi' newbranch
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this function, a commit filter can leave out unwanted commits
(such as temporary commits). It does _not_ undo the changeset
corresponding to that commit, but it _skips_ the revision. IOW
no tree object is changed by this.
If you like to commit early and often, but want to filter out all
intermediate commits, marked by "@@@" in the commit message, you can
now do this with
git filter-branch --commit-filter '
if git cat-file commit $GIT_COMMIT | grep '@@@' > /dev/null;
then
skip_commit "$@";
else
git commit-tree "$@";
fi' newbranch
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
filter-branch: provide the convenience functions also for commit filters
Move the convenience functions to the top of git-filter-branch.sh, and
return from the script when the environment variable SOURCE_FUNCTIONS is
set.
By sourcing git-filter-branch with that variable set automatically, all
commit filters may access the convenience functions like "map".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the convenience functions to the top of git-filter-branch.sh, and
return from the script when the environment variable SOURCE_FUNCTIONS is
set.
By sourcing git-filter-branch with that variable set automatically, all
commit filters may access the convenience functions like "map".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase -i: mention the option to split commits in the man page
The interactive mode of rebase can be used to split commits. Tell the
interested parties about it, with a dedicated section in the man page.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive mode of rebase can be used to split commits. Tell the
interested parties about it, with a dedicated section in the man page.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
filter-branch: fix remnants of old syntax in documentation
Some time ago, filter-branch's syntax changed so that more than one
ref can be rewritten at the same time. This involved the removal of
the ref name for the result; instead, the refs are rewritten in-place.
This updates the last leftovers in the documentation to reflect the
new behavior.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some time ago, filter-branch's syntax changed so that more than one
ref can be rewritten at the same time. This involved the removal of
the ref name for the result; instead, the refs are rewritten in-place.
This updates the last leftovers in the documentation to reflect the
new behavior.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach bash about completing arguments for git-tag
Lately I have been doing a lot of calls to `git tag -d` and also to
`git tag -v`. In both such cases being able to complete the names
of existing tags saves the fingers some typing effort. We now look
for the -d or -v option to git-tag in the bash completion support
and offer up existing tag names as possible choices for these.
When creating a new tag we now also offer bash completion support
for the second argument to git-tag (the object to be tagged) as this
can often be a specific existing branch name and is not necessarily
the current HEAD.
If the -f option is being used to recreate an existing tag we now
also offer completion support on the existing tag names for the
first argument of git-tag, helping to the user to reselect the
prior tag name that they are trying to replace.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Lately I have been doing a lot of calls to `git tag -d` and also to
`git tag -v`. In both such cases being able to complete the names
of existing tags saves the fingers some typing effort. We now look
for the -d or -v option to git-tag in the bash completion support
and offer up existing tag names as possible choices for these.
When creating a new tag we now also offer bash completion support
for the second argument to git-tag (the object to be tagged) as this
can often be a specific existing branch name and is not necessarily
the current HEAD.
If the -f option is being used to recreate an existing tag we now
also offer completion support on the existing tag names for the
first argument of git-tag, helping to the user to reselect the
prior tag name that they are trying to replace.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Hopefully the final update to draft release notes for 1.5.3.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make "git-log --" without paths behave the same as "git-log" without --
"git log" family of commands, even when run from a subdirectory,
do not limit the revision range with the current directory as
the path limiter, but with double-dash without any paths after
it, i.e. "git log --" do so. It was a mistake to have a
difference between "git log --" and "git log" introduced in
commit ae563542bf10fa8c33abd2a354e4b28aca4264d7 (First cut at
libifying revlist generation).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log" family of commands, even when run from a subdirectory,
do not limit the revision range with the current directory as
the path limiter, but with double-dash without any paths after
it, i.e. "git log --" do so. It was a mistake to have a
difference between "git log --" and "git log" introduced in
commit ae563542bf10fa8c33abd2a354e4b28aca4264d7 (First cut at
libifying revlist generation).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-init: autodetect core.symlinks
We already autodetect if filemode is reliable on the filesystem
to deal with VFAT and friends. Do the same for symbolic link
support.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already autodetect if filemode is reliable on the filesystem
to deal with VFAT and friends. Do the same for symbolic link
support.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git-archimport log entries more consistent
When appending the "git-archimport-id:" line to the end of log entries,
git-archimport would use two blank lines as a separator when there was no
body in the arch log (only a Summary: line), and zero blank lines when there
was a body (making it hard to see the break between the actual log message
and the git-archimport-id: line).
This patch makes git-archimport generate one blank line as a separator in all
cases.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When appending the "git-archimport-id:" line to the end of log entries,
git-archimport would use two blank lines as a separator when there was no
body in the arch log (only a Summary: line), and zero blank lines when there
was a body (making it hard to see the break between the actual log message
and the git-archimport-id: line).
This patch makes git-archimport generate one blank line as a separator in all
cases.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fix same sized delta logic
The code favoring shallower deltas when size is equal was triggered
only when previous delta was also cached. There should be no relation
between cached deltas and same sized deltas.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code favoring shallower deltas when size is equal was triggered
only when previous delta was also cached. There should be no relation
between cached deltas and same sized deltas.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
filter-branch: make sure orig_namespace ends with a single slash.
Later in a loop any existing ref whose path begins with it is
removed. It would be a disaster if you allowed it to say refs/head
for example.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Later in a loop any existing ref whose path begins with it is
removed. It would be a disaster if you allowed it to say refs/head
for example.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-filter-branch: document --original option
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-filter-branch: more detailed USAGE
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: do not allow gnu make to remove test-*.o files
It appears parallel build (-j) gets confused.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It appears parallel build (-j) gets confused.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Temporary fix for stack smashing in mailinfo
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixing comment in merge strategies
Comments in both these strategies refer to the wrong number
of remotes
Signed-off-by: Tom Clarke <tom@u2i.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Comments in both these strategies refer to the wrong number
of remotes
Signed-off-by: Tom Clarke <tom@u2i.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-files --error-unmatch: do not barf if the same pattern is given twice.
This is most visible when you do "git commit Makefile Makefile"; it
may be a stupid request, but that is not a reason to fail the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is most visible when you do "git commit Makefile Makefile"; it
may be a stupid request, but that is not a reason to fail the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'master' of git://git./gitk/gitk
* 'master' of git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Fix bug causing undefined variable error when cherry-picking
* 'master' of git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Fix bug causing undefined variable error when cherry-picking
completion: also complete git-log's --left-right and --cherry-pick option
Both --left-right and --cherry-pick are particularly long to type, so
help the user there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both --left-right and --cherry-pick are particularly long to type, so
help the user there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitk: Fix bug causing undefined variable error when cherry-picking
When "Show nearby tags" is turned off and the user did a cherry-pick,
we were trying to access variables relating to the descendent/ancestor
tag & head computations in addnewchild though they hadn't been set.
This makes sure we don't do that. Reported by Johannes Sixt.
Signed-off-by: Paul Mackerras <paulus@samba.org>
When "Show nearby tags" is turned off and the user did a cherry-pick,
we were trying to access variables relating to the descendent/ancestor
tag & head computations in addnewchild though they hadn't been set.
This makes sure we don't do that. Reported by Johannes Sixt.
Signed-off-by: Paul Mackerras <paulus@samba.org>
git-daemon(1): assorted improvements.
Jari Aalto noticed a handful places in git-daemon documentation
that need to be improved.
* --inetd makes --pid-file to be ignored, in addition to --user
and --group
* receive-pack service was not described at all. We should, if
only to warn about the security implications of it.
* There was no example of per repository configuration.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jari Aalto noticed a handful places in git-daemon documentation
that need to be improved.
* --inetd makes --pid-file to be ignored, in addition to --user
and --group
* receive-pack service was not described at all. We should, if
only to warn about the security implications of it.
* There was no example of per repository configuration.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT 1.5.3-rc7
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn.txt: fix an obvious misspelling.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>