Fix up progress report for off-by-one error
We used to print the index of the object we unpacked, not how many we
had unpacked. Which caused slightly confusing progress reports like
100% (2/3) done
rather than the more obvious "3/3" for 100% ;)
We used to print the index of the object we unpacked, not how many we
had unpacked. Which caused slightly confusing progress reports like
100% (2/3) done
rather than the more obvious "3/3" for 100% ;)
Make "git log" exit properly if not in a git archive
Instead of getting an incomprehensible error message from git-rev-list.
Instead of getting an incomprehensible error message from git-rev-list.
Avoid signedness warnings in sha1_file.c
Very irritating. But "snprintf()" wants "char *", and zlib wants
"unsigned char *".
Very irritating. But "snprintf()" wants "char *", and zlib wants
"unsigned char *".
[PATCH] Remove map_sha1_file
Remove map_sha1_file(), now unused.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove map_sha1_file(), now unused.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] write_sha1_to_fd()
Add write_sha1_to_fd(), which writes an object to a file descriptor. This
includes support for unpacking it and recompressing it.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add write_sha1_to_fd(), which writes an object to a file descriptor. This
includes support for unpacking it and recompressing it.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
git-rev-list: allow missing objects when the parent is marked UNINTERESTING
We still want the "top-most" uninteresting object to exist, so that we
know that we have reached it.
We still want the "top-most" uninteresting object to exist, so that we
know that we have reached it.
Add "-q" flag to "git commit"
Maybe you don't want the progress report.
Maybe you don't want the progress report.
git-unpack-objects: show progress report by default
This ends up being very calming for big "git clone"s, since otherwise
you just get very frustrated with a long silence, wondering whether it's
working at all.
Use "-q" to quiet it down.
Now if we could just do the same for the initial "figure out what to
pack" phase, which can also be quite slow if the other end is busy (or
not packed and not in cache)...
This ends up being very calming for big "git clone"s, since otherwise
you just get very frustrated with a long silence, wondering whether it's
working at all.
Use "-q" to quiet it down.
Now if we could just do the same for the initial "figure out what to
pack" phase, which can also be quite slow if the other end is busy (or
not packed and not in cache)...
[PATCH] format-patch: fix skipping of blank-lines
If it is fed a commit with more than one leading blank lines,
the sed scripts git-format-patch-script used looped forever.
Using git-stripspace upfront makes the sed script somewhat
simpler to work around this problem.
Also use git-rev-parse so that we can say
$ git-format-patch-script HEAD^^^^
to prepare the latest four patches for e-mail submission.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If it is fed a commit with more than one leading blank lines,
the sed scripts git-format-patch-script used looped forever.
Using git-stripspace upfront makes the sed script somewhat
simpler to work around this problem.
Also use git-rev-parse so that we can say
$ git-format-patch-script HEAD^^^^
to prepare the latest four patches for e-mail submission.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update the tutorial a bit
Add notes on branches, merging, tagging, and update some of the usage to
the friendlier "git cmd" syntax.
It's still ridiculously lacking, but perhaps it's a _bit_ more useful.
Add notes on branches, merging, tagging, and update some of the usage to
the friendlier "git cmd" syntax.
It's still ridiculously lacking, but perhaps it's a _bit_ more useful.
Make "git tag" more user-friendly
Instead of having to cut-and-paste the result, write it to the tag
directory directly. Also, start an editor for the tag message, rather
than just reading it from stdin.
Instead of having to cut-and-paste the result, write it to the tag
directory directly. Also, start an editor for the tag message, rather
than just reading it from stdin.
Make "git resolve" take the merge message in $3
It used to do "Merge $3" as the message, but that ends up being
inconvenient, and much more easily done inside git-pull-script instead.
This makes the third argument to "git resolve" much easier to explain.
It used to do "Merge $3" as the message, but that ends up being
inconvenient, and much more easily done inside git-pull-script instead.
This makes the third argument to "git resolve" much easier to explain.
[PATCH] Use SHA1 for git-update-cache --refresh
Change git-update-cache --refresh behaviour to use sha1's rather than
comparing byte by byte.
[JC demangled whitespace from the posted patch himself because he
liked it so much. Also adjusted to the index_fd() interface
slightly done differently from the original one.]
Signed-off-by: Bryan Larsen <bryan.larsen@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change git-update-cache --refresh behaviour to use sha1's rather than
comparing byte by byte.
[JC demangled whitespace from the posted patch himself because he
liked it so much. Also adjusted to the index_fd() interface
slightly done differently from the original one.]
Signed-off-by: Bryan Larsen <bryan.larsen@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Add --info-only option to git-update-cache.
Add --info-only option to git-update-cache.
[JC demangled whitespace from the posted patch himself because he
liked it so much. Also adjusted to the index_fd() interface
slightly done differently from the original one.]
Signed-off-by: Bryan Larsen <bryan.larsen@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add --info-only option to git-update-cache.
[JC demangled whitespace from the posted patch himself because he
liked it so much. Also adjusted to the index_fd() interface
slightly done differently from the original one.]
Signed-off-by: Bryan Larsen <bryan.larsen@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Expose object ID computation functions.
This patch makes the first half of write_sha1_file() and
index_fd() externally visible, to allow callers to compute the
object ID without actually storing it in the object database.
[JC demangled the whitespaces himself because he liked the patch
so much, and reworked the interface to index_fd() slightly,
taking suggestion from Linus and of his own.]
Signed-off-by: Bryan Larsen <bryan.larsen@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch makes the first half of write_sha1_file() and
index_fd() externally visible, to allow callers to compute the
object ID without actually storing it in the object database.
[JC demangled the whitespaces himself because he liked the patch
so much, and reworked the interface to index_fd() slightly,
taking suggestion from Linus and of his own.]
Signed-off-by: Bryan Larsen <bryan.larsen@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Teach "git clone" about rsync sources
That will be the normal way of cloning anonymously for a while, so let's
make sure it's easy to use.
That will be the normal way of cloning anonymously for a while, so let's
make sure it's easy to use.
Make "upload-pack" match git-fetch-pack usage
Do the default "try xyz.git xyz fails" thing for the directory we get
passed in.
Do the default "try xyz.git xyz fails" thing for the directory we get
passed in.
Add "mkpath()" helper function
I'm bored with doing it by hand all the time.
I'm bored with doing it by hand all the time.
Mark git-relink-script and git-repack-script executable
Sure, "install" will default to installing it executable anyway, but
this is the right thing to do.
Sure, "install" will default to installing it executable anyway, but
this is the right thing to do.
Make "git clone" a lot more user-friendly
This silently adds the ".git" directory component if needed, so you
don't need to state it explicitly for the source. Also, it turns the
source into an absolute pathname when local, so that you can use
relative pathnames without losing sight of the source when we cd into
the destination.
This silently adds the ".git" directory component if needed, so you
don't need to state it explicitly for the source. Also, it turns the
source into an absolute pathname when local, so that you can use
relative pathnames without losing sight of the source when we cd into
the destination.
Add "git-push-script" to make a more regular interface
It only does local and ssh pushes, because it's really just a wrapper
for git-send-pack. We might make it do an rsync mirror or something, of
course.
It only does local and ssh pushes, because it's really just a wrapper
for git-send-pack. We might make it do an rsync mirror or something, of
course.
Teach 'git-send-pack' to send new branches and tags.
The protocol always supported it, but send-pack didn't actually know how
to tell the other side about a new branch/tag.
NOTE! You'll have to name it explicitly on the command line: if you
don't name any branches, git-send-pack will default to the branches that
already exist.
The protocol always supported it, but send-pack didn't actually know how
to tell the other side about a new branch/tag.
NOTE! You'll have to name it explicitly on the command line: if you
don't name any branches, git-send-pack will default to the branches that
already exist.
Make "for_each_ref()" always use the "canonical" refname.
It always uses a git-relative pathname, ie "refs/heads/master" instead of
".git/refs/heads/master" or whatever your GIT_DIR might be.
This way when we send refs back-and-forth between repositories, there's
never any question about GIT_DIR on either side.
It always uses a git-relative pathname, ie "refs/heads/master" instead of
".git/refs/heads/master" or whatever your GIT_DIR might be.
This way when we send refs back-and-forth between repositories, there's
never any question about GIT_DIR on either side.
[PATCH] Use sq_quote() to properly quote the parameter to call shell.
This tries to be more lenient to the users and stricter to the
attackers by quoting the input properly for shell safety,
instead of forbidding certain characters from the input.
Things to note:
- We do not quote "prog" parameter (which comes from --exec).
The user should know what he is doing. --exec='echo foo'
will supply the first two parameters to the resulting
command, while --exec="'echo foo'" will give the first
parameter, a single string with a space inside.
- We do not care too much about leaking the sq_quote() output
just before running exec().
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This tries to be more lenient to the users and stricter to the
attackers by quoting the input properly for shell safety,
instead of forbidding certain characters from the input.
Things to note:
- We do not quote "prog" parameter (which comes from --exec).
The user should know what he is doing. --exec='echo foo'
will supply the first two parameters to the resulting
command, while --exec="'echo foo'" will give the first
parameter, a single string with a space inside.
- We do not care too much about leaking the sq_quote() output
just before running exec().
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Make sq_expand() available as sq_quote().
A useful shell safety helper sq_expand() was hidden as a static
function in diff.c. Extract it out and make it available as
sq_quote().
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A useful shell safety helper sq_expand() was hidden as a static
function in diff.c. Extract it out and make it available as
sq_quote().
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add "git-sh-setup-script" for common git shell script setup
It sets up the normal git environment variables and a few helper
functions (currently just "die()"), and returns ok if it all looks like
a git archive. So use it something like
. git-sh-setup-script || die "Not a git archive"
to make the rest of the git scripts more careful and readable.
It sets up the normal git environment variables and a few helper
functions (currently just "die()"), and returns ok if it all looks like
a git archive. So use it something like
. git-sh-setup-script || die "Not a git archive"
to make the rest of the git scripts more careful and readable.
git-diff-*: support "-u" as a synonym for "-p"
I'm probably not the only one whose fingers have gotten hard-wired to
use "-u" for "unified diff".
I'm probably not the only one whose fingers have gotten hard-wired to
use "-u" for "unified diff".
[PATCH] git-format-patch: Prepare patches for e-mail submission.
This is the script I use to prepare patches for e-mail submission.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is the script I use to prepare patches for e-mail submission.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mark more characters shell-safe.
I still worry about just quoting things when passing it off to "ssh" or
"sh -c", so I'm being anal. But _, ^ and , are certainly ok and while
both ~ and @ can have speacial meaning to shell/ssh they are benign.
I still worry about just quoting things when passing it off to "ssh" or
"sh -c", so I'm being anal. But _, ^ and , are certainly ok and while
both ~ and @ can have speacial meaning to shell/ssh they are benign.
git-fsck-cache: don't complain about lacking references when they are all in packs.
We used to not count them at all, which then made us complain that there
were no refs.
We used to not count them at all, which then made us complain that there
were no refs.
Merge /pub/scm/linux/kernel/git/chrisw/git
[PATCH] Typofix an error message in pack-check.c
The current error message does not make any sense.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The current error message does not make any sense.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Prevent t6000 series from dropping useless sed.script in t/
The Makefile in the test suite directory considers any file
matching t[0-9][0-9][0-9][0-9]-*.sh as the top-level test script
to be executed. Unfortunately this was not documented, and the
common test library, t6000-lib.sh was named to match that
pattern. This caused t6000-lib.sh to be called from Makefile as
the top-level program, causing it to leave t/sed.script file
behind. Rename it to t6000lib.sh to prevent this, and document
the naming convention a bit more clearly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The Makefile in the test suite directory considers any file
matching t[0-9][0-9][0-9][0-9]-*.sh as the top-level test script
to be executed. Unfortunately this was not documented, and the
common test library, t6000-lib.sh was named to match that
pattern. This caused t6000-lib.sh to be called from Makefile as
the top-level program, causing it to leave t/sed.script file
behind. Rename it to t6000lib.sh to prevent this, and document
the naming convention a bit more clearly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Short-circuit git-clone-pack while cloning locally (take 2).
When we are cloning a repository on a local filesystem, it is
faster to just create a hard linkfarm of .git/object hierarchy
and copy the .git/refs files. By default, the script uses the
clone-pack method, but it can be told with the -l flag to do the
hard linkfarm (falling back on recursive file copy) to replicate
the .git/object hierarchy.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When we are cloning a repository on a local filesystem, it is
faster to just create a hard linkfarm of .git/object hierarchy
and copy the .git/refs files. By default, the script uses the
clone-pack method, but it can be told with the -l flag to do the
hard linkfarm (falling back on recursive file copy) to replicate
the .git/object hierarchy.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Infrastructure for git rpm builds. Adds GIT_VERSION to Makefile and new make
targets: git.spec, dist, and rpm. A simple 'make rpm' will build the rpm.
Also adds git.spec.in which is used to generate git.spec.
Signed-off-by: Chris Wright <chrisw@osdl.org>
targets: git.spec, dist, and rpm. A simple 'make rpm' will build the rpm.
Also adds git.spec.in which is used to generate git.spec.
Signed-off-by: Chris Wright <chrisw@osdl.org>
git-clone-pack: fix sparse warning
Local function that wasn't marked static
Local function that wasn't marked static
[PATCH] Tidy up - remove use of (*f)() idiom from epoch.c
Replace (*f)() with f() where the former idiom was used in epoch.c
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace (*f)() with f() where the former idiom was used in epoch.c
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Ensure list insertion method does not depend on position of --merge-order argument
This change ensures that git-rev-list --merge-order produces the same result
irrespective of what position the --merge-order argument appears in the argument
list.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This change ensures that git-rev-list --merge-order produces the same result
irrespective of what position the --merge-order argument appears in the argument
list.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Write sed script directly into temp file, rather than a variable
When sed uses \n rather than ; as a separator (for BSD sed(1) compat),
it is cleaner to use a file directly, rather than an environment
variable containing \n characters.
This change changes t/t6000 write to sed.script directly and changes
the other tests to remove knowledge of sed.script.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When sed uses \n rather than ; as a separator (for BSD sed(1) compat),
it is cleaner to use a file directly, rather than an environment
variable containing \n characters.
This change changes t/t6000 write to sed.script directly and changes
the other tests to remove knowledge of sed.script.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Add t/t6003 with some --topo-order tests
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make gitk use --topo-order instead of --merge-order
It's cheaper to calculate, and doesn't give different results depending
on the order of the arguments passed in (and is thus more appropriate
for something like gitk that can validly take the unordered "--all" flag
to show all branches).
The previous dup fix seems to have fixed --topo-order. Holler if you
still see problems.
It's cheaper to calculate, and doesn't give different results depending
on the order of the arguments passed in (and is thus more appropriate
for something like gitk that can validly take the unordered "--all" flag
to show all branches).
The previous dup fix seems to have fixed --topo-order. Holler if you
still see problems.
git-rev-list: remove the DUPCHECK logic, use SEEN instead
That's what we should have done in the first place, since it not only
avoids another unnecessary flag, it also protects the commits from
showing up as duplicates later when they show up as parents of another
commit (in the pop_most_recent_commit() path).
This will hopefully also fix --topo-sort.
That's what we should have done in the first place, since it not only
avoids another unnecessary flag, it also protects the commits from
showing up as duplicates later when they show up as parents of another
commit (in the pop_most_recent_commit() path).
This will hopefully also fix --topo-sort.
Make sure we generate the whole commit list before trying to sort it topologically
This was my cherry-pickng merge bug. But topo-order still shows strange
behaviour with multiple heads, so keep gitk using --merge-order for now.
This was my cherry-pickng merge bug. But topo-order still shows strange
behaviour with multiple heads, so keep gitk using --merge-order for now.
[PATCH] Let umask do its work upon filesystem object creation.
IIRC our strategy was to let the users' umask take care of the
final mode bits. This patch fixes places that deviate from it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
IIRC our strategy was to let the users' umask take care of the
final mode bits. This patch fixes places that deviate from it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] clone-pack.c:write_one_ref() - Create leading directories.
The function write_one_ref() is passed the list of refs received
from the other end, which was obtained by directory traversal
under $GIT_DIR/refs; this can contain paths other than what
git-init-db prepares and would fail to clone when there is
such.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The function write_one_ref() is passed the list of refs received
from the other end, which was obtained by directory traversal
under $GIT_DIR/refs; this can contain paths other than what
git-init-db prepares and would fail to clone when there is
such.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Fixes a problem with --merge-order A B (A is linear descendent of a merge B)
This patch passes the test case introduced by the previous patch.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch passes the test case introduced by the previous patch.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Add a t/t6001 test case for a --merge-order bug
This test case demonstrates a problem with --merge-order.
A
|
B
|\
C D
|/
E
|
F
git-rev-list --merge-order A B doesn't produce the expected output of
A
B
D
C
E
F
The problem is fixed by a subsequent patch.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This test case demonstrates a problem with --merge-order.
A
|
B
|\
C D
|/
E
|
F
git-rev-list --merge-order A B doesn't produce the expected output of
A
B
D
C
E
F
The problem is fixed by a subsequent patch.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Tidy up - slight simplification of rev-list.c
This patch implements a small tidy up of rev-list.c to reduce
(but not eliminate) the amount of ugliness associated
with the merge_order flag.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch implements a small tidy up of rev-list.c to reduce
(but not eliminate) the amount of ugliness associated
with the merge_order flag.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add "--topo-order" flag to use new topological sort
[PATCH] Add a topological sort procedure to commit.c
This introduces an in-place topological sort procedure to commit.c.
Given a list of commits, sort_in_topological_order() will perform an in-place
topological sort of that list.
The invariant that applies to the resulting list is:
a reachable from b => ord(b) < ord(a)
This invariant is weaker than the --merge-order invariant, but is cheaper
to calculate (assuming the list has been identified) and will serve any
purpose where only a minimal topological order guarantee is required.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This introduces an in-place topological sort procedure to commit.c.
Given a list of commits, sort_in_topological_order() will perform an in-place
topological sort of that list.
The invariant that applies to the resulting list is:
a reachable from b => ord(b) < ord(a)
This invariant is weaker than the --merge-order invariant, but is cheaper
to calculate (assuming the list has been identified) and will serve any
purpose where only a minimal topological order guarantee is required.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use the new git-rev-parse "--[no-]flags" in "git diff".
This allows you to do
git diff v2.6.12..v2.6.13-rc1 drivers/pcmcia
to see the diff between v2.6.12 and v2.6.13-rc1 as limited by the
filename argument.
This allows you to do
git diff v2.6.12..v2.6.13-rc1 drivers/pcmcia
to see the diff between v2.6.12 and v2.6.13-rc1 as limited by the
filename argument.
Add "--flags" and "--no-flags" arguments to git-rev-parse
The scripts that use this (notably "git diff") will want to split up
flags and file arguments.
The scripts that use this (notably "git diff") will want to split up
flags and file arguments.
Remove insane overlapping bit ranges from epoch.c
..and move the DUPCHECK to rev-list.c since both the merge-order and the
upcoming topo-sort get confused by dups.
..and move the DUPCHECK to rev-list.c since both the merge-order and the
upcoming topo-sort get confused by dups.
Clean up commit insertion in git-rev-list
Jon wants the commits in a different order for merge-order.
Jon wants the commits in a different order for merge-order.
Make "insert_by_date()" match "commit_list_insert()"
Same argument order, same return type. This allows us to use a function
pointer to choose one over the other.
Same argument order, same return type. This allows us to use a function
pointer to choose one over the other.
[PATCH] Change the sed seperator in t/t6000-lib.sh.
This trivial patch removes the semicolon as the sed seperator in the t/t6000-lib.sh test script
and replaces it with white space. This makes BSD sed(1) much happier.
Signed-off-by: Mark Allen <mrallen1@yahoo.com>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This trivial patch removes the semicolon as the sed seperator in the t/t6000-lib.sh test script
and replaces it with white space. This makes BSD sed(1) much happier.
Signed-off-by: Mark Allen <mrallen1@yahoo.com>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Introduce unit tests for git-rev-list --bisect
This patch introduces some unit tests for the git-rev-list --bisect functionality.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch introduces some unit tests for the git-rev-list --bisect functionality.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Factor out useful test case infrastructure from t/t6001... into t/t6000-lib.sh
Functions that are useful to other t6xxx testcases are moved into t6000-lib.sh
To use these functions in a test case, use a test-case pre-amble like:
. ./test-lib.sh
. ../t6000-lib.sh # t6xxx specific functions
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Functions that are useful to other t6xxx testcases are moved into t6000-lib.sh
To use these functions in a test case, use a test-case pre-amble like:
. ./test-lib.sh
. ../t6000-lib.sh # t6xxx specific functions
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Fix fd leak in git-cvsimport-script
Remember to close temporary file
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remember to close temporary file
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] sha1_file.c;prepare_packed_git_one() - fix DIR leak
The function calls opendir() without a matching closedir().
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The function calls opendir() without a matching closedir().
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Merge master.kernel.org:/pub/scm/gitk/gitk
Fix up path-cleanup in git_path() properly
GIT_DIR=. ends up being what some of the pack senders use, and we
sometimes messed up when cleaning up the path, ie a ".//HEAD" was
cleaned up into "/HEAD", not "HEAD" like it should be.
We should do some other cleanup, and probably also verify that symlinks
don't point to outside the git area.
GIT_DIR=. ends up being what some of the pack senders use, and we
sometimes messed up when cleaning up the path, ie a ".//HEAD" was
cleaned up into "/HEAD", not "HEAD" like it should be.
We should do some other cleanup, and probably also verify that symlinks
don't point to outside the git area.
Increase the number of possible heads requested from git-upload-pack
Now that git-clone-pack exists, we actually have somebody requesting
more than just a single head in a pack. So allow the Jeff's of this
world to clone things with tens of heads.
Now that git-clone-pack exists, we actually have somebody requesting
more than just a single head in a pack. So allow the Jeff's of this
world to clone things with tens of heads.
Add a "git-show-index" helper that shows the contents of a pack index
This was invaluable for debugging the zero-sized compression issue, and
might be useful for scripting too, if people want to see the contents of
a pack.
This was invaluable for debugging the zero-sized compression issue, and
might be useful for scripting too, if people want to see the contents of
a pack.
Don't special-case a zero-sized compression.
zlib actually writes a header for that case, and while ignoring that
header will get us the right data, it will also end up messing up our
stream position. So we actually want zlib to "uncompress" even an empty
object.
zlib actually writes a header for that case, and while ignoring that
header will get us the right data, it will also end up messing up our
stream position. So we actually want zlib to "uncompress" even an empty
object.
Make "git clone" use the new git-clone-pack
Add "git-clone-pack" program to help with "git clone"
Fix silly thinko in "head_ref()"
It did a "for_each_ref()" in addition to the HEAD case, which was a
left-over from an early broken test.
It did a "for_each_ref()" in addition to the HEAD case, which was a
left-over from an early broken test.
Move "get_ack()" to common git_connect functions
git-clone-pack will want it too. Soon.
git-clone-pack will want it too. Soon.
Remove multi-head support from fetch-pack
It was a misguided attempt to mix fetching and cloning. I'll make
a separate clone thing.
It was a misguided attempt to mix fetching and cloning. I'll make
a separate clone thing.
Remove unnecessary usage of strncmp() in git-rev-list arg parsing.
Not only is it unnecessary, it incorrectly allows extraneous characters
at the end of the argument.
Junio noticed the --merge-order thing, and Jon points out that if we fix
that one, we should fix --show-breaks too.
Not only is it unnecessary, it incorrectly allows extraneous characters
at the end of the argument.
Junio noticed the --merge-order thing, and Jon points out that if we fix
that one, we should fix --show-breaks too.
Merge head 'cvs2git' of netz.smurf.noris.de/git/git
Work around git-http-pull breakage in git-fetch-script
Need to add a final slash. And make it verbose by default, since it's
so slow that otherwise people will think it's died.
Need to add a final slash. And make it verbose by default, since it's
so slow that otherwise people will think it's died.
git-fetch-script: use git-fetch-pack for local and ssh fetches.
Also, clean it up a lot.
Also, clean it up a lot.
Add "git_path()" and "head_ref()" helper functions.
"git_path()" returns a static pathname pointer into the git directory
using a printf-like format specifier.
"head_ref()" works like "for_each_ref()", except for just the HEAD.
"git_path()" returns a static pathname pointer into the git directory
using a printf-like format specifier.
"head_ref()" works like "for_each_ref()", except for just the HEAD.
Merge with Linus' current tree
Merge ... www.liacs.nl/~sverdool/git.git#cvs2git
cvsimport: getopt accepted a -q option (undocumented and unused).
Removed.
Removed.
git-cvsimport-script: move working directory forward
If HEAD happened to point to a cvs branch, move the
working directory forward to the tip of the branch.
Additionally, if master and "origin" are equal,
move master forward to new origin first.
If HEAD happened to point to a cvs branch, move the
working directory forward to the tip of the branch.
Additionally, if master and "origin" are equal,
move master forward to new origin first.
git-rev-list: make sure the output is sorted by recency
We didn't sort the refs by date, so if you had multiple refs, the end
result would not be properly sorted.
We didn't sort the refs by date, so if you had multiple refs, the end
result would not be properly sorted.
Make rev-list flush the stdio buffers after each rev.
We'd rather get the revisions in a slow but timely manner than
have to wait for them.
We'd rather get the revisions in a slow but timely manner than
have to wait for them.
Make git-fetch-pack actually do all the unpacking etc.
It returns the result SHA1 on stdout, so you can do
remote=$(git-fetch-pack host:dir branchname)
and it will unpack the objects and "remote" will be the SHA1 name of the
branch on the other side. You can then save that off, or merge it, or
whatever.
It returns the result SHA1 on stdout, so you can do
remote=$(git-fetch-pack host:dir branchname)
and it will unpack the objects and "remote" will be the SHA1 name of the
branch on the other side. You can then save that off, or merge it, or
whatever.
Make git-fetch-pack and git-upload-pack negotiate needs/haves fully
Now the only piece missing is actually generating the pack-file.
Now the only piece missing is actually generating the pack-file.
Clean up output of "for_each_ref()" when GIT_DIR is "."
Remove the "./" at the head, it just looks much nicer.
Remove the "./" at the head, it just looks much nicer.
git-cvsimport-script: remove unused variable
Commit first cut at "git-fetch-pack"
It's meant to be used by "git fetch" for the local and ssh case.
It doesn't actually do the fetching now, but it does discover the common
commit point.
It's meant to be used by "git fetch" for the local and ssh case.
It doesn't actually do the fetching now, but it does discover the common
commit point.
Move ref path matching to connect.c library
It's a generic thing for matching refs from the other side.
It's a generic thing for matching refs from the other side.
Factor out the ssh connection stuff from send-pack.c
I want to use it for git-fetch-pack too.
I want to use it for git-fetch-pack too.
git-cvsimport-script: more error handling
[PATCH] Fixup t/t5300 unit tests broken by 5f3de58ff85c49620ae2a1722d8d4d37c881a054
This patch fixes up the t/t5300 unit tests which were broken by the changes in:
Make the name of a pack-file depend on the objects packed there-in.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch fixes up the t/t5300 unit tests which were broken by the changes in:
Make the name of a pack-file depend on the objects packed there-in.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
git-cvsimport-script: provide direct support for cvsps -z option
git-cvsimport-script: update cvsps cache instead of rebuilding it
Updating the cache is sufficient for most purposes.
If users really want to rebuild the cache, they can specify
the option themselves.
Updating the cache is sufficient for most purposes.
If users really want to rebuild the cache, they can specify
the option themselves.
git-cvsimport-script: fix branch switching
Previous patch broke branch switching.
Previous patch broke branch switching.
git-cvsimport-script: use private index.
git-rev-parse: support show sha1 names for pack entries
This is actually subtly wrong. If a short match is found in the object
directory, but would _also_ match another SHA1 ID in a pack (or it shows
in one pack but not another), we'll never have done the pack lookup, and
we think it's unique.
I can't find it in myself to care. You really want to use enough of a
SHA1 that there is never any ambiguity.
This is actually subtly wrong. If a short match is found in the object
directory, but would _also_ match another SHA1 ID in a pack (or it shows
in one pack but not another), we'll never have done the pack lookup, and
we think it's unique.
I can't find it in myself to care. You really want to use enough of a
SHA1 that there is never any ambiguity.
Make git-rev-parse support cogito-style "short hex names"
Currently only for unpacked objects, but the infrastructure
is there to do it for packed objects too.
Currently only for unpacked objects, but the infrastructure
is there to do it for packed objects too.
git-cvsimport-script: leave working directory alone.
Make the name of a pack-file depend on the objects packed there-in.
This means that the .git/objects/pack directory is also rsync'able,
since the filenames created there-in are either unique or refer to the
same data.
Otherwise you might not be able to pull from a directory that is partly
packed without having to worry about missing objects due to pack-file
name clashes.
This means that the .git/objects/pack directory is also rsync'able,
since the filenames created there-in are either unique or refer to the
same data.
Otherwise you might not be able to pull from a directory that is partly
packed without having to worry about missing objects due to pack-file
name clashes.
git-cvsimport-script: typo head -> heads
Add "git-prune-packed" that removes objects that exist in a pack.
This, together with "git repack" can be used to clean up unpacked
git archives.
This, together with "git repack" can be used to clean up unpacked
git archives.