Merge branch 'jc/cc-ld-dynpath'
* jc/cc-ld-dynpath:
configure: auto detect dynamic library path switches
Makefile: Allow CC_LD_DYNPATH to be overriden
Conflicts:
Makefile
config.mak.in
* jc/cc-ld-dynpath:
configure: auto detect dynamic library path switches
Makefile: Allow CC_LD_DYNPATH to be overriden
Conflicts:
Makefile
config.mak.in
Merge branch 'jc/hide-cr-in-diff-from-less'
* jc/hide-cr-in-diff-from-less:
diff: Help "less" hide ^M from the output
* jc/hide-cr-in-diff-from-less:
diff: Help "less" hide ^M from the output
Merge branch 'jc/maint-checkout-fix'
* jc/maint-checkout-fix:
checkout: do not check out unmerged higher stages randomly
Conflicts:
t/t7201-co.sh
* jc/maint-checkout-fix:
checkout: do not check out unmerged higher stages randomly
Conflicts:
t/t7201-co.sh
Teach "git diff -p" to locate PHP class methods
Otherwise it will always print the class-name rather
than the name of the function inside that class.
While we're at it, reorder the gitattributes manpage to
list the built-in funcname pattern names in alphabetical
order.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise it will always print the class-name rather
than the name of the function inside that class.
While we're at it, reorder the gitattributes manpage to
list the built-in funcname pattern names in alphabetical
order.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update draft release notes for 1.6.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge git://git.bogomips.org/git-svn
* git://git.bogomips.org/git-svn:
git-svn: set auto_props when renaming files
t9124: clean up chdir usage
git-svn: fix 'info' tests for unknown items
git-svn: match SVN 1.5 behaviour of info' on unknown item
git svn info: always quote URLs in 'info' output
git svn info: make info relative to the current directory
git svn info: tests: fix ptouch argument order in setup
git svn info: tests: use test_cmp instead of git-diff
git svn info: tests: do not use set -e
git svn info: tests: let 'init' test run with SVN 1.5
git svn: catch lack of upstream info for dcommit earlier
git-svn: check error code of send_txstream
git-svn: Send deltas during commits
git-svn: Introduce SVN::Git::Editor::_chg_file_get_blob
git-svn: extract base blob in generate_diff
* git://git.bogomips.org/git-svn:
git-svn: set auto_props when renaming files
t9124: clean up chdir usage
git-svn: fix 'info' tests for unknown items
git-svn: match SVN 1.5 behaviour of info' on unknown item
git svn info: always quote URLs in 'info' output
git svn info: make info relative to the current directory
git svn info: tests: fix ptouch argument order in setup
git svn info: tests: use test_cmp instead of git-diff
git svn info: tests: do not use set -e
git svn info: tests: let 'init' test run with SVN 1.5
git svn: catch lack of upstream info for dcommit earlier
git-svn: check error code of send_txstream
git-svn: Send deltas during commits
git-svn: Introduce SVN::Git::Editor::_chg_file_get_blob
git-svn: extract base blob in generate_diff
git-svn: set auto_props when renaming files
Patch-by: Paul Talacko <gnuruandstuff@yahoo.co.uk>:
<http://article.gmane.org/gmane.comp.version-control.git/95006>
> Hello,
>
> There's an issue in git-svn as autoprops are not applied to
> renamed files, only to added files.
>
> This patch fixes the bug.
[ew: added test case]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Patch-by: Paul Talacko <gnuruandstuff@yahoo.co.uk>:
<http://article.gmane.org/gmane.comp.version-control.git/95006>
> Hello,
>
> There's an issue in git-svn as autoprops are not applied to
> renamed files, only to added files.
>
> This patch fixes the bug.
[ew: added test case]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
t9124: clean up chdir usage
Spawn subshells when running things in subdirectories instead of
chdir-ing to the path of an undefined variable, which is
confusing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Spawn subshells when running things in subdirectories instead of
chdir-ing to the path of an undefined variable, which is
confusing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Merge updated git-gui and gitk that call each other
Merge git://repo.or.cz/git-gui and git://git.kernel.org/pub/scm/gitk/gitk
* git://repo.or.cz/git-gui:
git-gui: Show special diffs for complex conflict cases.
git-gui: Make F5 reselect a diff, if an untracked file is selected.
git-gui: Reimplement and enhance auto-selection of diffs.
git-gui: Support conflict states _U & UT.
git-gui: Support more merge tools.
git-gui: Don't allow staging files with conflicts.
git-gui: Support calling merge tools.
git-gui: Support resolving conflicts via the diff context menu.
git-gui: Mark forgotten strings for translation.
git-gui: Allow specifying an initial line for git gui blame.
git-gui: Better positioning in Blame Parent Commit
git-gui: Support passing blame to a parent commit.
git-gui: Support starting gitk from Gui Blame
git-gui: Teach git gui about file type changes
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Add menu item for calling git gui blame
gitk: Add option to specify the default commit on command line
Merge git://repo.or.cz/git-gui and git://git.kernel.org/pub/scm/gitk/gitk
* git://repo.or.cz/git-gui:
git-gui: Show special diffs for complex conflict cases.
git-gui: Make F5 reselect a diff, if an untracked file is selected.
git-gui: Reimplement and enhance auto-selection of diffs.
git-gui: Support conflict states _U & UT.
git-gui: Support more merge tools.
git-gui: Don't allow staging files with conflicts.
git-gui: Support calling merge tools.
git-gui: Support resolving conflicts via the diff context menu.
git-gui: Mark forgotten strings for translation.
git-gui: Allow specifying an initial line for git gui blame.
git-gui: Better positioning in Blame Parent Commit
git-gui: Support passing blame to a parent commit.
git-gui: Support starting gitk from Gui Blame
git-gui: Teach git gui about file type changes
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Add menu item for calling git gui blame
gitk: Add option to specify the default commit on command line
Merge branch 'maint'
* maint:
Update draft release notes for 1.6.0.2
stash: refresh the index before deciding if the work tree is dirty
Mention the fact that 'git annotate' is only for backward compatibility.
"blame -c" should be compatible with "annotate"
git-gui: Fix diff parsing for lines starting with "--" or "++"
git-gui: Fix string escaping in po2msg.sh
git gui: show diffs with a minimum of 1 context line
git-gui: update all remaining translations to French.
git-gui: Update french translation
* maint:
Update draft release notes for 1.6.0.2
stash: refresh the index before deciding if the work tree is dirty
Mention the fact that 'git annotate' is only for backward compatibility.
"blame -c" should be compatible with "annotate"
git-gui: Fix diff parsing for lines starting with "--" or "++"
git-gui: Fix string escaping in po2msg.sh
git gui: show diffs with a minimum of 1 context line
git-gui: update all remaining translations to French.
git-gui: Update french translation
Update draft release notes for 1.6.0.2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
stash: refresh the index before deciding if the work tree is dirty
Unlike the case where the user does have a real change in the work tree,
refusing to work because of unclean stat information is not very helpful.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Nanako Shiraishi <nanako3@lavabit.com>
Unlike the case where the user does have a real change in the work tree,
refusing to work because of unclean stat information is not very helpful.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Nanako Shiraishi <nanako3@lavabit.com>
Merge branch 'maint' of git://repo.or.cz/git-gui into maint
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Fix diff parsing for lines starting with "--" or "++"
git-gui: Fix string escaping in po2msg.sh
git gui: show diffs with a minimum of 1 context line
git-gui: update all remaining translations to French.
git-gui: Update french translation
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Fix diff parsing for lines starting with "--" or "++"
git-gui: Fix string escaping in po2msg.sh
git gui: show diffs with a minimum of 1 context line
git-gui: update all remaining translations to French.
git-gui: Update french translation
git-svn: fix 'info' tests for unknown items
The previous tests all expected the results from SVN and Git to be
identical, and expected both to return success. This cannot be
guaranteed: SVN changed the message style between 1.4 and 1.5, and
in 1.5, sets a failure exit code.
Change the tests to verify that 'git svn info <item>' sets a failure
exit code, and that its output contains the file name. This should
hopefully catch all other errors.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
The previous tests all expected the results from SVN and Git to be
identical, and expected both to return success. This cannot be
guaranteed: SVN changed the message style between 1.4 and 1.5, and
in 1.5, sets a failure exit code.
Change the tests to verify that 'git svn info <item>' sets a failure
exit code, and that its output contains the file name. This should
hopefully catch all other errors.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn: match SVN 1.5 behaviour of info' on unknown item
Previously 'git svn info unknown-file' only announced its failure (in
the SVN 1.4 style, "not a versioned resource"), and exited
successfully.
It is desirable to actually exit with failure, so change the code to
exit(1) under this condition. Since that is already halfway SVN 1.5
compatibility, also change the error output to match 1.5.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
Previously 'git svn info unknown-file' only announced its failure (in
the SVN 1.4 style, "not a versioned resource"), and exited
successfully.
It is desirable to actually exit with failure, so change the code to
exit(1) under this condition. Since that is already halfway SVN 1.5
compatibility, also change the error output to match 1.5.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
git svn info: always quote URLs in 'info' output
Changes 'git svn info' to always URL-escape the 'URL' and 'Repository'
fields and --url output, like SVN (at least 1.5) does.
Note that reusing the escape_url() further down in Git::SVN::Ra is not
possible because it only triggers for http(s) URLs. I did not know
whether extending it to all schemes would break SVN access anywhere,
so I made a new one that quotes in all schemes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
Changes 'git svn info' to always URL-escape the 'URL' and 'Repository'
fields and --url output, like SVN (at least 1.5) does.
Note that reusing the escape_url() further down in Git::SVN::Ra is not
possible because it only triggers for http(s) URLs. I did not know
whether extending it to all schemes would break SVN access anywhere,
so I made a new one that quotes in all schemes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
git svn info: make info relative to the current directory
Previously 'git svn info <path>' would always treat the <path> as
relative to the working directory root, with a default of ".". This
does not match the behaviour of 'svn info'. Prepend $(git rev-parse
--show-prefix) to the path used inside cmd_info to make it relative to
the current working directory.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
Previously 'git svn info <path>' would always treat the <path> as
relative to the working directory root, with a default of ".". This
does not match the behaviour of 'svn info'. Prepend $(git rev-parse
--show-prefix) to the path used inside cmd_info to make it relative to
the current working directory.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
git svn info: tests: fix ptouch argument order in setup
The arguments must be <gitwc-path> <svnwc-path>, otherwise it fails to
update the timestamps (without setting a failure exit code) and
results in bad test output later on.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
The arguments must be <gitwc-path> <svnwc-path>, otherwise it fails to
update the timestamps (without setting a failure exit code) and
results in bad test output later on.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
git svn info: tests: use test_cmp instead of git-diff
git-diff does not appear to return the correct exit values, and gives
a false success for more than half (!) of the tests due to the space
in "trash directory" which git-svn fails to encode.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-diff does not appear to return the correct exit values, and gives
a false success for more than half (!) of the tests due to the space
in "trash directory" which git-svn fails to encode.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
git svn info: tests: do not use set -e
Exiting in the middle of a test confuses the test suite, which will
just say "FATAL: Unexpected exit with code 1" in response to a failed
test, instead of actually diagnosing failure and continuing with the
next test.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
Exiting in the middle of a test confuses the test suite, which will
just say "FATAL: Unexpected exit with code 1" in response to a failed
test, instead of actually diagnosing failure and continuing with the
next test.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
git svn info: tests: let 'init' test run with SVN 1.5
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
git svn: catch lack of upstream info for dcommit earlier
Since 711521e 'git svn dcommit' attempts to use the upstream
information to determine the SVN URL, before it verifies that it even
found an upstream. Move up the corresponding check.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
Since 711521e 'git svn dcommit' attempts to use the upstream
information to determine the SVN URL, before it verifies that it even
found an upstream. Move up the corresponding check.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn: check error code of send_txstream
Not checking the error code of a function used to transform and
send data makes me nervous. It currently returns "undef" on
success; so die if we get any result other than "undef" because
it's likely something went wrong somewhere. I really wish this
function returned an MD5 like send_stream (or better yet, SHA1)
for verification.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Not checking the error code of a function used to transform and
send data makes me nervous. It currently returns "undef" on
success; so die if we get any result other than "undef" because
it's likely something went wrong somewhere. I really wish this
function returned an MD5 like send_stream (or better yet, SHA1)
for verification.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
git-svn: Send deltas during commits
Signed-off-by: Florian Weimer <fw@deneb.enyo.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Florian Weimer <fw@deneb.enyo.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn: Introduce SVN::Git::Editor::_chg_file_get_blob
Signed-off-by: Florian Weimer <fw@deneb.enyo.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Florian Weimer <fw@deneb.enyo.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn: extract base blob in generate_diff
We need the base blob to compute a delta to be sent to the server.
Signed-off-by: Florian Weimer <fw@deneb.enyo.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
We need the base blob to compute a delta to be sent to the server.
Signed-off-by: Florian Weimer <fw@deneb.enyo.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Mention the fact that 'git annotate' is only for backward compatibility.
When somebody is reading git-blame.txt (or git-annotate.txt) for the first
time, the message we would like to send is:
(1) Here is why you would want to use this command, what it can do
(perhaps more than what you would have expected from "$scm blame"),
and how you tell it to do what it does.
This is obvious.
(2) You might have heard of the command with the other name. There is no
difference between the two, except they differ in their default
output formats.
This is essential to answer: "git has both? how are they different?"
(3) We tend to encourage blame over annotate for new scripts and new
people, but there is no reason to choose one over the other.
This is not as important as (2), but would be useful to avoid
repeated questions about "when will we start deprecating this?"
As long as we describe (2) on git-annotate page clearly enough, people who
read git-blame page first and get curious can refer to git-annotate page.
While at it, subtly hint (3) without being overly explicit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When somebody is reading git-blame.txt (or git-annotate.txt) for the first
time, the message we would like to send is:
(1) Here is why you would want to use this command, what it can do
(perhaps more than what you would have expected from "$scm blame"),
and how you tell it to do what it does.
This is obvious.
(2) You might have heard of the command with the other name. There is no
difference between the two, except they differ in their default
output formats.
This is essential to answer: "git has both? how are they different?"
(3) We tend to encourage blame over annotate for new scripts and new
people, but there is no reason to choose one over the other.
This is not as important as (2), but would be useful to avoid
repeated questions about "when will we start deprecating this?"
As long as we describe (2) on git-annotate page clearly enough, people who
read git-blame page first and get curious can refer to git-annotate page.
While at it, subtly hint (3) without being overly explicit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"blame -c" should be compatible with "annotate"
There is no reason to have a separate variable cmd_is_annotate;
OUTPUT_ANNOTATE_COMPAT option is supposed to produce the compatibility
output, and we should produce the same output even when the command was
not invoked as "annotate" but as "blame -c".
Noticed by Pasky.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason to have a separate variable cmd_is_annotate;
OUTPUT_ANNOTATE_COMPAT option is supposed to produce the compatibility
output, and we should produce the same output even when the command was
not invoked as "annotate" but as "blame -c".
Noticed by Pasky.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jc/maint-log-grep'
* jc/maint-log-grep:
log --author/--committer: really match only with name part
diff --cumulative is a sub-option of --dirstat
bash completion: Hide more plumbing commands
* jc/maint-log-grep:
log --author/--committer: really match only with name part
diff --cumulative is a sub-option of --dirstat
bash completion: Hide more plumbing commands
log --author/--committer: really match only with name part
When we tried to find commits done by AUTHOR, the first implementation
tried to pattern match a line with "^author .*AUTHOR", which later was
enhanced to strip leading caret and look for "^author AUTHOR" when the
search pattern was anchored at the left end (i.e. --author="^AUTHOR").
This had a few problems:
* When looking for fixed strings (e.g. "git log -F --author=x --grep=y"),
the regexp internally used "^author .*x" would never match anything;
* To match at the end (e.g. "git log --author='google.com>$'"), the
generated regexp has to also match the trailing timestamp part the
commit header lines have. Also, in order to determine if the '$' at
the end means "match at the end of the line" or just a literal dollar
sign (probably backslash-quoted), we would need to parse the regexp
ourselves.
An earlier alternative tried to make sure that a line matches "^author "
(to limit by field name) and the user supplied pattern at the same time.
While it solved the -F problem by introducing a special override for
matching the "^author ", it did not solve the trailing timestamp nor tail
match problem. It also would have matched every commit if --author=author
was asked for, not because the author's email part had this string, but
because every commit header line that talks about the author begins with
that field name, regardleses of who wrote it.
Instead of piling more hacks on top of hacks, this rethinks the grep
machinery that is used to look for strings in the commit header, and makes
sure that (1) field name matches literally at the beginning of the line,
followed by a SP, and (2) the user supplied pattern is matched against the
remainder of the line, excluding the trailing timestamp data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we tried to find commits done by AUTHOR, the first implementation
tried to pattern match a line with "^author .*AUTHOR", which later was
enhanced to strip leading caret and look for "^author AUTHOR" when the
search pattern was anchored at the left end (i.e. --author="^AUTHOR").
This had a few problems:
* When looking for fixed strings (e.g. "git log -F --author=x --grep=y"),
the regexp internally used "^author .*x" would never match anything;
* To match at the end (e.g. "git log --author='google.com>$'"), the
generated regexp has to also match the trailing timestamp part the
commit header lines have. Also, in order to determine if the '$' at
the end means "match at the end of the line" or just a literal dollar
sign (probably backslash-quoted), we would need to parse the regexp
ourselves.
An earlier alternative tried to make sure that a line matches "^author "
(to limit by field name) and the user supplied pattern at the same time.
While it solved the -F problem by introducing a special override for
matching the "^author ", it did not solve the trailing timestamp nor tail
match problem. It also would have matched every commit if --author=author
was asked for, not because the author's email part had this string, but
because every commit header line that talks about the author begins with
that field name, regardleses of who wrote it.
Instead of piling more hacks on top of hacks, this rethinks the grep
machinery that is used to look for strings in the commit header, and makes
sure that (1) field name matches literally at the beginning of the line,
followed by a SP, and (2) the user supplied pattern is matched against the
remainder of the line, excluding the trailing timestamp data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
git-gui: Fix diff parsing for lines starting with "--" or "++"
* maint:
git-gui: Fix diff parsing for lines starting with "--" or "++"
git-gui: Fix diff parsing for lines starting with "--" or "++"
Languages like Lua and SQL use "--" to mark a line as commented out.
If this appears at column 0 and is part of the pre-image we may see
"--- foo" in the diff, indicating that the line whose content is
"-- foo" has been removed from the new version.
git-gui was incorrectly parsing "--- foo" as the old file name
in the file header, causing it to generate a bad patch file when
the user tried to stage or unstage a hunk or the selected line.
We need to keep track of where we are in the parsing so that we do
not misread a deletion or addition record as part of the header.
Reported-by: Alexander Gladysh <agladysh@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Languages like Lua and SQL use "--" to mark a line as commented out.
If this appears at column 0 and is part of the pre-image we may see
"--- foo" in the diff, indicating that the line whose content is
"-- foo" has been removed from the new version.
git-gui was incorrectly parsing "--- foo" as the old file name
in the file header, causing it to generate a bad patch file when
the user tried to stage or unstage a hunk or the selected line.
We need to keep track of where we are in the parsing so that we do
not misread a deletion or addition record as part of the header.
Reported-by: Alexander Gladysh <agladysh@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Show special diffs for complex conflict cases.
Add special handling for displaying diffs of modified/deleted,
and symlink/mode conflicts. Currently the display is completely
unusable for deciding how to resolve the conflict.
New display modes:
1) Deleted/Modified conflict: e.g.
LOCAL: deleted
REMOTE:
[diff :1:$path :3:$path]
2) Conflict involving symlinks:
LOCAL:
[diff :1:$path :2:$path]
REMOTE:
[diff :1:$path :3:$path]
In order to be able to display multiple diffs, this
patch adds a queue of commands to call.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add special handling for displaying diffs of modified/deleted,
and symlink/mode conflicts. Currently the display is completely
unusable for deciding how to resolve the conflict.
New display modes:
1) Deleted/Modified conflict: e.g.
LOCAL: deleted
REMOTE:
[diff :1:$path :3:$path]
2) Conflict involving symlinks:
LOCAL:
[diff :1:$path :2:$path]
REMOTE:
[diff :1:$path :3:$path]
In order to be able to display multiple diffs, this
patch adds a queue of commands to call.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Make F5 reselect a diff, if an untracked file is selected.
If an untracked file is selected, F5 and other manual rescan synonyms
would try to select a tracked file instead. Also, clicking on an icon
in the unstaged changes list skips over untracked files, unless the
file clicked is untracked itself.
The objective is to make it easier to ignore untracked files showing
up in the Unstaged Changes list, and ensure that no modifications
to tracked objects are left unstaged.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If an untracked file is selected, F5 and other manual rescan synonyms
would try to select a tracked file instead. Also, clicking on an icon
in the unstaged changes list skips over untracked files, unless the
file clicked is untracked itself.
The objective is to make it easier to ignore untracked files showing
up in the Unstaged Changes list, and ensure that no modifications
to tracked objects are left unstaged.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Reimplement and enhance auto-selection of diffs.
Generalize the next_diff system, and implement auto-reselection
for merge tool resolution and reshow_diff. Also add auto-selection
of diffs after rescan, if no diff is already selected.
New auto-select rules:
- Rescan auto-selects the first conflicting file, or if none
a modified tracked file, if nothing was selected previously.
- Resolving a conflict auto-selects the nearest conflicting
file, or nothing if everything is resolved.
- Staging the last remaining hunk auto-selects the nearest
modified staged file.
- Staging a file through its icon auto-selects the nearest file.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Generalize the next_diff system, and implement auto-reselection
for merge tool resolution and reshow_diff. Also add auto-selection
of diffs after rescan, if no diff is already selected.
New auto-select rules:
- Rescan auto-selects the first conflicting file, or if none
a modified tracked file, if nothing was selected previously.
- Resolving a conflict auto-selects the nearest conflicting
file, or nothing if everything is resolved.
- Staging the last remaining hunk auto-selects the nearest
modified staged file.
- Staging a file through its icon auto-selects the nearest file.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Support conflict states _U & UT.
Support _U (local deleted, remote modified) and
UT (file type changed in conflict) modes.
Note that 'file type changed' does not refer to
changes in the executable bit, instead it denotes
replacing a file with a link, or vice versa.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Support _U (local deleted, remote modified) and
UT (file type changed in conflict) modes.
Note that 'file type changed' does not refer to
changes in the executable bit, instead it denotes
replacing a file with a link, or vice versa.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Support more merge tools.
Add native support for Araxis Merge, WinMerge and Perforce merge.
Custom merge tools are not implemented by mergetool.tcl; besides,
native support allows constructing the command lines in a more
intelligent way.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add native support for Araxis Merge, WinMerge and Perforce merge.
Custom merge tools are not implemented by mergetool.tcl; besides,
native support allows constructing the command lines in a more
intelligent way.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Don't allow staging files with conflicts.
Prevent staging files with conflict markers by clicking
on the icon in the 'Unstaged Changes' list. Instead, pretend
that the user clicked the name, and show the diff.
Originally it made some sense to allow staging conflicting
files, because git-gui did not provide any tools to resolve
them from within the GUI. But now that we have added mergetool
capabilities, it is more likely to cause accidental and
non-undoable errors.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Prevent staging files with conflict markers by clicking
on the icon in the 'Unstaged Changes' list. Instead, pretend
that the user clicked the name, and show the diff.
Originally it made some sense to allow staging conflicting
files, because git-gui did not provide any tools to resolve
them from within the GUI. But now that we have added mergetool
capabilities, it is more likely to cause accidental and
non-undoable errors.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Support calling merge tools.
Adds an item to the diff context menu in conflict mode,
which invokes a merge tool for the selected file. Tool
command-line handling code was ported from git-mergetool.
Automatic default tool selection and custom merge tools
are not supported. If merge.tool is not set, git-gui
defaults to meld.
This implementation uses a checkout-index hack in order
to retrieve all stages with autocrlf and filters properly
applied. It requires temporarily moving the original
conflict file out of the way.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Adds an item to the diff context menu in conflict mode,
which invokes a merge tool for the selected file. Tool
command-line handling code was ported from git-mergetool.
Automatic default tool selection and custom merge tools
are not supported. If merge.tool is not set, git-gui
defaults to meld.
This implementation uses a checkout-index hack in order
to retrieve all stages with autocrlf and filters properly
applied. It requires temporarily moving the original
conflict file out of the way.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Support resolving conflicts via the diff context menu.
If the file has merge conflicts, show a special version of the
diff context menu, which includes conflict resolution commands
instead of Stage Hunk/Line. This patch only supports resolving
by discarding all sides except one.
Discarding is the only way to resolve conflicts involving symlinks
and/or deletion, excluding manual editing.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the file has merge conflicts, show a special version of the
diff context menu, which includes conflict resolution commands
instead of Stage Hunk/Line. This patch only supports resolving
by discarding all sides except one.
Discarding is the only way to resolve conflicts involving symlinks
and/or deletion, excluding manual editing.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Mark forgotten strings for translation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
diff --cumulative is a sub-option of --dirstat
The option used to be implemented as if it is a totally independent one,
but "git diff --cumulative" would not mean anything without "--dirstat".
This makes --cumulative imply --dirstat.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option used to be implemented as if it is a totally independent one,
but "git diff --cumulative" would not mean anything without "--dirstat".
This makes --cumulative imply --dirstat.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash completion: Hide more plumbing commands
git <tab><tab> still shows way too many commands, some of them
are clearly plumbing. This patch hides the plumbing commands
liberally (that is, in special cases, users still might want to
call one of the hidden commands, a *normal* workflow should never
involve these, though - and if it does, we have a UI problem anyway).
Signed-off-by: Petr Baudis <pasky@suse.cz>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git <tab><tab> still shows way too many commands, some of them
are clearly plumbing. This patch hides the plumbing commands
liberally (that is, in special cases, users still might want to
call one of the hidden commands, a *normal* workflow should never
involve these, though - and if it does, we have a UI problem anyway).
Signed-off-by: Petr Baudis <pasky@suse.cz>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update draft release notes for 1.6.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
Start 1.6.0.2 maintenance cycle
tests: use "git xyzzy" form (t7200 - t9001)
tests: use "git xyzzy" form (t7000 - t7199)
Fix passwd(5) ref and reflect that commit doens't use commit-tree
improve handling of sideband message display
tests: use "git xyzzy" form (t3600 - t6999)
tests: use "git xyzzy" form (t0000 - t3599)
checkout: fix message when leaving detached HEAD
clone: fix creation of explicitly named target directory
'git foo' program identifies itself without dash in die() messages
setup_git_directory(): fix move to worktree toplevel directory
update-index: fix worktree setup
Start conforming code to "git subcmd" style
read-tree: setup worktree if merge is required
grep: fix worktree setup
diff*: fix worktree setup
Conflicts:
RelNotes
t/t3900-i18n-commit.sh
t/t7003-filter-branch.sh
* maint:
Start 1.6.0.2 maintenance cycle
tests: use "git xyzzy" form (t7200 - t9001)
tests: use "git xyzzy" form (t7000 - t7199)
Fix passwd(5) ref and reflect that commit doens't use commit-tree
improve handling of sideband message display
tests: use "git xyzzy" form (t3600 - t6999)
tests: use "git xyzzy" form (t0000 - t3599)
checkout: fix message when leaving detached HEAD
clone: fix creation of explicitly named target directory
'git foo' program identifies itself without dash in die() messages
setup_git_directory(): fix move to worktree toplevel directory
update-index: fix worktree setup
Start conforming code to "git subcmd" style
read-tree: setup worktree if merge is required
grep: fix worktree setup
diff*: fix worktree setup
Conflicts:
RelNotes
t/t3900-i18n-commit.sh
t/t7003-filter-branch.sh
Start 1.6.0.2 maintenance cycle
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'nd/worktree' into maint
* nd/worktree:
setup_git_directory(): fix move to worktree toplevel directory
update-index: fix worktree setup
read-tree: setup worktree if merge is required
grep: fix worktree setup
diff*: fix worktree setup
* nd/worktree:
setup_git_directory(): fix move to worktree toplevel directory
update-index: fix worktree setup
read-tree: setup worktree if merge is required
grep: fix worktree setup
diff*: fix worktree setup
Merge branch 'ho/dashless' into maint
* ho/dashless:
tests: use "git xyzzy" form (t7200 - t9001)
tests: use "git xyzzy" form (t7000 - t7199)
tests: use "git xyzzy" form (t3600 - t6999)
tests: use "git xyzzy" form (t0000 - t3599)
'git foo' program identifies itself without dash in die() messages
Start conforming code to "git subcmd" style
* ho/dashless:
tests: use "git xyzzy" form (t7200 - t9001)
tests: use "git xyzzy" form (t7000 - t7199)
tests: use "git xyzzy" form (t3600 - t6999)
tests: use "git xyzzy" form (t0000 - t3599)
'git foo' program identifies itself without dash in die() messages
Start conforming code to "git subcmd" style
tests: use "git xyzzy" form (t7200 - t9001)
Converts tests between t7201-t9001.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Converts tests between t7201-t9001.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: use "git xyzzy" form (t7000 - t7199)
Converts tests between t7001-t7103.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Converts tests between t7001-t7103.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix passwd(5) ref and reflect that commit doens't use commit-tree
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
improve handling of sideband message display
Currently the code looks for line break characters in order to prepend
"remote: " to every line received as many lines can be sent in a single
chunk. However the opposite might happen too, i.e. a single message
line split amongst multiple chunks. This patch adds support for the
later case to avoid displays like:
remote: Compressing objeremote: cts: 100% (313/313), done.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the code looks for line break characters in order to prepend
"remote: " to every line received as many lines can be sent in a single
chunk. However the opposite might happen too, i.e. a single message
line split amongst multiple chunks. This patch adds support for the
later case to avoid displays like:
remote: Compressing objeremote: cts: 100% (313/313), done.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: use "git xyzzy" form (t3600 - t6999)
Converts tests between t3600-t6300.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Converts tests between t3600-t6300.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: use "git xyzzy" form (t0000 - t3599)
Converts tests between t0050-t3903.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Converts tests between t0050-t3903.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout: fix message when leaving detached HEAD
The shell version of git checkout would print:
Previous HEAD position was 1234abcd... commit subject line
when leaving a detached HEAD for another commit. Ths C
version attempted to implement this, but got the condition
wrong such that the behavior never triggered.
This patch simplifies the conditions for showing the message
to the ones used by the shell version: any time we are
leaving a detached HEAD and the new and old commits are not
the same (this suppresses it for the "git checkout -b new"
case recommended when you enter the detached state).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell version of git checkout would print:
Previous HEAD position was 1234abcd... commit subject line
when leaving a detached HEAD for another commit. Ths C
version attempted to implement this, but got the condition
wrong such that the behavior never triggered.
This patch simplifies the conditions for showing the message
to the ones used by the shell version: any time we are
leaving a detached HEAD and the new and old commits are not
the same (this suppresses it for the "git checkout -b new"
case recommended when you enter the detached state).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
clone: fix creation of explicitly named target directory
'git clone <repo> path/' (note the trailing slash) fails, because the
entire path is interpreted as leading directories. So when mkdir tries to
create the actual path, it already exists.
This makes sure trailing slashes are removed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git clone <repo> path/' (note the trailing slash) fails, because the
entire path is interpreted as leading directories. So when mkdir tries to
create the actual path, it already exists.
This makes sure trailing slashes are removed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'tr/filter-branch'
* tr/filter-branch:
revision --simplify-merges: make it a no-op without pathspec
revision --simplify-merges: do not leave commits unprocessed
revision --simplify-merges: use decoration instead of commit->util field
Documentation: rev-list-options: move --simplify-merges documentation
filter-branch: use --simplify-merges
filter-branch: fix ref rewriting with --subdirectory-filter
filter-branch: Extend test to show rewriting bug
Topo-sort before --simplify-merges
revision traversal: show full history with merge simplification
revision.c: whitespace fix
* tr/filter-branch:
revision --simplify-merges: make it a no-op without pathspec
revision --simplify-merges: do not leave commits unprocessed
revision --simplify-merges: use decoration instead of commit->util field
Documentation: rev-list-options: move --simplify-merges documentation
filter-branch: use --simplify-merges
filter-branch: fix ref rewriting with --subdirectory-filter
filter-branch: Extend test to show rewriting bug
Topo-sort before --simplify-merges
revision traversal: show full history with merge simplification
revision.c: whitespace fix
Merge branch 'np/maint-safer-pack'
* np/maint-safer-pack:
fixup_pack_header_footer(): use nicely aligned buffer sizes
index-pack: use fixup_pack_header_footer()'s validation mode
pack-objects: use fixup_pack_header_footer()'s validation mode
improve reliability of fixup_pack_header_footer()
pack-objects: improve returned information from write_one()
* np/maint-safer-pack:
fixup_pack_header_footer(): use nicely aligned buffer sizes
index-pack: use fixup_pack_header_footer()'s validation mode
pack-objects: use fixup_pack_header_footer()'s validation mode
improve reliability of fixup_pack_header_footer()
pack-objects: improve returned information from write_one()
Merge branch 'rf/man-env'
* rf/man-env:
builtin-help: fallback to GIT_MAN_VIEWER before man
* rf/man-env:
builtin-help: fallback to GIT_MAN_VIEWER before man
Merge branch 'jc/author-nickname'
* jc/author-nickname:
git commit --author=$name: look $name up in existing commits
* jc/author-nickname:
git commit --author=$name: look $name up in existing commits
Merge branch 'dp/pid-uintmax'
* dp/pid-uintmax:
cast pid_t's to uintmax_t to improve portability
* dp/pid-uintmax:
cast pid_t's to uintmax_t to improve portability
gitweb: ref markers link to named shortlogs
This patch turns ref markers for tags and heads into links to
appropriate views for the ref name, depending on current context.
For annotated tags, we link to the tag view, unless that's the current
view, in which case we switch to shortlog. For other refs, we prefer the
current view if it's history or (short)log, and default to shortlog
otherwise.
Appropriate changes are made in the CSS to prevent ref markers from
being annoyingly blue and underlined, unless hovered. A visual
indication of the target view difference is also implemented by making
annotated tags show up in italic.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch turns ref markers for tags and heads into links to
appropriate views for the ref name, depending on current context.
For annotated tags, we link to the tag view, unless that's the current
view, in which case we switch to shortlog. For other refs, we prefer the
current view if it's history or (short)log, and default to shortlog
otherwise.
Appropriate changes are made in the CSS to prevent ref markers from
being annoyingly blue and underlined, unless hovered. A visual
indication of the target view difference is also implemented by making
annotated tags show up in italic.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
Makefile: add merge_recursive.h to LIB_H
Improve documentation for --dirstat diff option
Bring local clone's origin URL in line with that of a remote clone
Documentation: minor cleanup in a use case in 'git stash' manual
Documentation: fix disappeared lines in 'git stash' manpage
Documentation: fix reference to a for-each-ref option
* maint:
Makefile: add merge_recursive.h to LIB_H
Improve documentation for --dirstat diff option
Bring local clone's origin URL in line with that of a remote clone
Documentation: minor cleanup in a use case in 'git stash' manual
Documentation: fix disappeared lines in 'git stash' manpage
Documentation: fix reference to a for-each-ref option
Makefile: add merge_recursive.h to LIB_H
When modifying merge-recursive.h, for example builtin-merge-recursive.c
have to be recompiled which was not true till now, causing various
runtime errors using an incremental build.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When modifying merge-recursive.h, for example builtin-merge-recursive.c
have to be recompiled which was not true till now, causing various
runtime errors using an incremental build.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve documentation for --dirstat diff option
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bring local clone's origin URL in line with that of a remote clone
On a local clone, "git clone" would use the fully DWIMmed path as the origin
URL in the resulting repo. This was slightly inconsistent with the case of a
remote clone where the _given_ URL was used as the origin URL (because the
DWIMming was done remotely, and was therefore not available to "git clone").
This behaviour caused problems when cloning a local non-bare repo with
relative submodule URLs, because these submodule URLs would then be resolved
against the DWIMmed URL (e.g. "/repo/.git") instead of the given URL (e.g.
"/repo").
This patch teaches "git clone" to use the _given_ URL - instead of the
DWIMmed path - as the origin URL. This causes relative submodule URLs to be
resolved correctly, as long the _given_ URL indicates the correct directory
against which the submodule URLs should be resolved.
The patch also updates a testcase that contained the old-style origin URLs.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a local clone, "git clone" would use the fully DWIMmed path as the origin
URL in the resulting repo. This was slightly inconsistent with the case of a
remote clone where the _given_ URL was used as the origin URL (because the
DWIMming was done remotely, and was therefore not available to "git clone").
This behaviour caused problems when cloning a local non-bare repo with
relative submodule URLs, because these submodule URLs would then be resolved
against the DWIMmed URL (e.g. "/repo/.git") instead of the given URL (e.g.
"/repo").
This patch teaches "git clone" to use the _given_ URL - instead of the
DWIMmed path - as the origin URL. This causes relative submodule URLs to be
resolved correctly, as long the _given_ URL indicates the correct directory
against which the submodule URLs should be resolved.
The patch also updates a testcase that contained the old-style origin URLs.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: minor cleanup in a use case in 'git stash' manual
There is no need to explicitly pass the file to be committed to 'git
commit', because it's contents is already in the index.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to explicitly pass the file to be committed to 'git
commit', because it's contents is already in the index.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: fix disappeared lines in 'git stash' manpage
Asciidoc removes lines starting with a dot when creating manpages.
Since those lines were comments in use case examples showing shell
commands, preceed those lines with a hash sign.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc removes lines starting with a dot when creating manpages.
Since those lines were comments in use case examples showing shell
commands, preceed those lines with a hash sign.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: fix reference to a for-each-ref option
... to match the synopsis section
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
... to match the synopsis section
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
git-gui: Fix string escaping in po2msg.sh
git gui: show diffs with a minimum of 1 context line
Conflicts:
lib/option.tcl
* maint:
git-gui: Fix string escaping in po2msg.sh
git gui: show diffs with a minimum of 1 context line
Conflicts:
lib/option.tcl
git-gui: Fix string escaping in po2msg.sh
Escape '$', because otherwise git-gui crashes while
trying to load malformed Japanese localization strings.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Escape '$', because otherwise git-gui crashes while
trying to load malformed Japanese localization strings.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git gui: show diffs with a minimum of 1 context line
Staging hunks without context does not work, because line number
information would have to be recomputed for individual hunks.
Since it is already possible to stage individual lines using
'Stage Line for Commit', zero context diffs are not really
necessary for git gui.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Staging hunks without context does not work, because line number
information would have to be recomputed for individual hunks.
Since it is already possible to stage individual lines using
'Stage Line for Commit', zero context diffs are not really
necessary for git gui.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Merge branch 'tr/rev-list-docs' into tr/filter-branch
This prepares the necessary parts to merge filter-branch
fix based on simplify-merges to master.
This prepares the necessary parts to merge filter-branch
fix based on simplify-merges to master.
cast pid_t's to uintmax_t to improve portability
Some systems (like e.g. OpenSolaris) define pid_t as long,
therefore all our sprintf that use %i/%d cause a compiler warning
beacuse of the implicit long->int cast. To make sure that
we fit the limits, we display pids as PRIuMAX and cast them explicitly
to uintmax_t.
Signed-off-by: David Soria Parra <dsp@php.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some systems (like e.g. OpenSolaris) define pid_t as long,
therefore all our sprintf that use %i/%d cause a compiler warning
beacuse of the implicit long->int cast. To make sure that
we fit the limits, we display pids as PRIuMAX and cast them explicitly
to uintmax_t.
Signed-off-by: David Soria Parra <dsp@php.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
Document sendemail.envelopesender configuration
Document clarification: gitmodules, gitattributes
config.txt: Add missing colons after option name
* maint:
Document sendemail.envelopesender configuration
Document clarification: gitmodules, gitattributes
config.txt: Add missing colons after option name
Document sendemail.envelopesender configuration
Signed-off-by: Ask Bjørn Hansen <ask@develooper.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ask Bjørn Hansen <ask@develooper.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document clarification: gitmodules, gitattributes
The SYNOPSIS section of gitattibutes and gitmodule fail to clearly
specify the name of the in tree files used. This patch brings in the
initial `.' and the fact that the `.gitmodules' file should reside at
the top-level of the working tree.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS section of gitattibutes and gitmodule fail to clearly
specify the name of the in tree files used. This patch brings in the
initial `.' and the fact that the `.gitmodules' file should reside at
the top-level of the working tree.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git foo' program identifies itself without dash in die() messages
This is a mechanical conversion of all '*.c' files with:
s/((?:die|error|warning)\("git)-(\S+:)/$1 $2/;
The result was manually inspected and no false positive was found.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a mechanical conversion of all '*.c' files with:
s/((?:die|error|warning)\("git)-(\S+:)/$1 $2/;
The result was manually inspected and no false positive was found.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_git_directory(): fix move to worktree toplevel directory
When setup_git_directory() returns successfully, it is supposed to move
current working directory to worktree toplevel directory.
However, the code recomputing prefix inside setup_git_directory() has
to move cwd back to original working directory, in order to get new
prefix. After that, it should move cwd back to worktree toplevel
directory as expected.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When setup_git_directory() returns successfully, it is supposed to move
current working directory to worktree toplevel directory.
However, the code recomputing prefix inside setup_git_directory() has
to move cwd back to original working directory, in order to get new
prefix. After that, it should move cwd back to worktree toplevel
directory as expected.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
update-index: fix worktree setup
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
config.txt: Add missing colons after option name
gitcvs.usecrlfattr --> gitcvs.usecrlfattr::
This fixes an asciidoc markup issue.
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitcvs.usecrlfattr --> gitcvs.usecrlfattr::
This fixes an asciidoc markup issue.
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git commit --author=$name: look $name up in existing commits
This allows "git commit --author=$name" to accept a name that is not in
the required "A U Thor <author@example.xz>" format, and use that to look
up an author name that matches from existing commits.
When using this feature, it is the user's responsibility to give a name
that uniquely matches the name s/he wants, as the logic returns the name
from the first matching commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows "git commit --author=$name" to accept a name that is not in
the required "A U Thor <author@example.xz>" format, and use that to look
up an author name that matches from existing commits.
When using this feature, it is the user's responsibility to give a name
that uniquely matches the name s/he wants, as the logic returns the name
from the first matching commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff: Help "less" hide ^M from the output
When the tracked contents have CRLF line endings, colored diff output
shows "^M" at the end of output lines, which is distracting, even though
the pager we use by default ("less") knows to hide them.
The problem is that "less" hides a carriage-return only at the end of the
line, immediately before a line feed. The colored diff output does not
take this into account, and emits four element sequence for each line:
- force this color;
- the line up to but not including the terminating line feed;
- reset color
- line feed.
By including the carriage return at the end of the line in the second
item, we are breaking the smart our pager has in order not to show "^M".
This can be fixed by changing the sequence to:
- force this color;
- the line up to but not including the terminating end-of-line;
- reset color
- end-of-line.
where end-of-line is either a single linefeed or a CRLF pair. When the
output is not colored, "force this color" and "reset color" sequences are
both empty, so we won't have this problem with or without this patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the tracked contents have CRLF line endings, colored diff output
shows "^M" at the end of output lines, which is distracting, even though
the pager we use by default ("less") knows to hide them.
The problem is that "less" hides a carriage-return only at the end of the
line, immediately before a line feed. The colored diff output does not
take this into account, and emits four element sequence for each line:
- force this color;
- the line up to but not including the terminating line feed;
- reset color
- line feed.
By including the carriage return at the end of the line in the second
item, we are breaking the smart our pager has in order not to show "^M".
This can be fixed by changing the sequence to:
- force this color;
- the line up to but not including the terminating end-of-line;
- reset color
- end-of-line.
where end-of-line is either a single linefeed or a CRLF pair. When the
output is not colored, "force this color" and "reset color" sequences are
both empty, so we won't have this problem with or without this patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
gitattributes: -crlf is not binary
git-apply: Loosen "match_beginning" logic
Fix example in git-name-rev documentation
shell: do not play duplicated definition games to shrink the executable
Fix use of hardlinks in "make install"
pack-objects: Allow missing base objects when creating thin packs
* maint:
gitattributes: -crlf is not binary
git-apply: Loosen "match_beginning" logic
Fix example in git-name-rev documentation
shell: do not play duplicated definition games to shrink the executable
Fix use of hardlinks in "make install"
pack-objects: Allow missing base objects when creating thin packs
gitattributes: -crlf is not binary
The description of crlf attribute incorrectly said that "-crlf" means
binary. It is true that for binary files you would want "-crlf", but
that is not the same thing.
We also have supported attribute macros and via that mechanism a handy
"binary" to specify "-crlf -diff" at the same time. It was not documented
anywhere as far as I can tell, even though the support was there from
the very beginning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of crlf attribute incorrectly said that "-crlf" means
binary. It is true that for binary files you would want "-crlf", but
that is not the same thing.
We also have supported attribute macros and via that mechanism a handy
"binary" to specify "-crlf -diff" at the same time. It was not documented
anywhere as far as I can tell, even though the support was there from
the very beginning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout: do not check out unmerged higher stages randomly
During a conflicted merge when you have unmerged stages for a
path F in the index, if you said:
$ git checkout F
we rewrote F as many times as we have stages for it, and the
last one (typically "theirs") was left in the work tree, without
resolving the conflict.
This fixes it by noticing that a specified pathspec pattern
matches an unmerged path, and by erroring out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During a conflicted merge when you have unmerged stages for a
path F in the index, if you said:
$ git checkout F
we rewrote F as many times as we have stages for it, and the
last one (typically "theirs") was left in the work tree, without
resolving the conflict.
This fixes it by noticing that a specified pathspec pattern
matches an unmerged path, and by erroring out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jc/post-simplify' (early part) into tr/filter-branch
* 'jc/post-simplify' (early part):
revision --simplify-merges: make it a no-op without pathspec
revision --simplify-merges: do not leave commits unprocessed
revision --simplify-merges: use decoration instead of commit->util field
* 'jc/post-simplify' (early part):
revision --simplify-merges: make it a no-op without pathspec
revision --simplify-merges: do not leave commits unprocessed
revision --simplify-merges: use decoration instead of commit->util field
Start conforming code to "git subcmd" style
User notifications are presented as 'git cmd', and code comments
are presented as '"cmd"' or 'git's cmd', rather than 'git-cmd'.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
User notifications are presented as 'git cmd', and code comments
are presented as '"cmd"' or 'git's cmd', rather than 'git-cmd'.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-apply: Loosen "match_beginning" logic
Even after a handfle attempts, match_beginning logic still has corner
cases:
1bf1a85 (apply: treat EOF as proper context., 2006-05-23)
65aadb9 (apply: force matching at the beginning., 2006-05-24)
4be6096 (apply --unidiff-zero: loosen sanity checks ..., 2006-09-17)
ee5a317 (Fix "git apply" to correctly enforce "match ..., 2008-04-06)
This is a tricky piece of code.
We still incorrectly enforce "match_beginning" for -U0 matches.
I noticed this while trying out an example sequence from Clemens Buchacher:
$ echo a >victim
$ git add victim
$ echo b >>victim
$ git diff -U0 >patch
$ cat patch
diff --git i/victim w/victim
index 7898192..422c2b7 100644
--- i/victim
+++ w/victim
@@ -1,0 +2 @@ a
+b
$ git apply --cached --unidiff-zero <patch
$ git show :victim
b
a
The change inserts a new line before the second line, but we insist it to
be applied at the beginning. As the result, the code refuses to apply it
at the original offset, and we end up adding the line at the beginning.
Updates to the test script are by Clemens Buchacher.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even after a handfle attempts, match_beginning logic still has corner
cases:
1bf1a85 (apply: treat EOF as proper context., 2006-05-23)
65aadb9 (apply: force matching at the beginning., 2006-05-24)
4be6096 (apply --unidiff-zero: loosen sanity checks ..., 2006-09-17)
ee5a317 (Fix "git apply" to correctly enforce "match ..., 2008-04-06)
This is a tricky piece of code.
We still incorrectly enforce "match_beginning" for -U0 matches.
I noticed this while trying out an example sequence from Clemens Buchacher:
$ echo a >victim
$ git add victim
$ echo b >>victim
$ git diff -U0 >patch
$ cat patch
diff --git i/victim w/victim
index 7898192..422c2b7 100644
--- i/victim
+++ w/victim
@@ -1,0 +2 @@ a
+b
$ git apply --cached --unidiff-zero <patch
$ git show :victim
b
a
The change inserts a new line before the second line, but we insist it to
be applied at the beginning. As the result, the code refuses to apply it
at the original offset, and we end up adding the line at the beginning.
Updates to the test script are by Clemens Buchacher.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix example in git-name-rev documentation
Since 59d3f54 (name-rev: avoid "^0" when unneeded, 2007-02-20), name-rev
stopped showing an unnecessary "^0" to dereference a tag down to a commit.
The patch should have made a matching update to the documentation, but we
forgot.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 59d3f54 (name-rev: avoid "^0" when unneeded, 2007-02-20), name-rev
stopped showing an unnecessary "^0" to dereference a tag down to a commit.
The patch should have made a matching update to the documentation, but we
forgot.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'sp/missing-thin-base' into maint
* sp/missing-thin-base:
pack-objects: Allow missing base objects when creating thin packs
* sp/missing-thin-base:
pack-objects: Allow missing base objects when creating thin packs
Merge branch 'sb/daemon'
* sb/daemon:
daemon.c: minor style fixup
git-daemon: rewrite kindergarden, new option --max-connections
git-daemon: Simplify dead-children reaping logic
git-daemon: use LOG_PID, simplify logging code
git-daemon: call logerror() instead of error()
* sb/daemon:
daemon.c: minor style fixup
git-daemon: rewrite kindergarden, new option --max-connections
git-daemon: Simplify dead-children reaping logic
git-daemon: use LOG_PID, simplify logging code
git-daemon: call logerror() instead of error()
Merge branch 'af/maint-install-no-handlink' into maint
* af/maint-install-no-handlink:
Fix use of hardlinks in "make install"
Makefile: always provide a fallback when hardlinks fail
* af/maint-install-no-handlink:
Fix use of hardlinks in "make install"
Makefile: always provide a fallback when hardlinks fail
shell: do not play duplicated definition games to shrink the executable
Playing with linker games to shrink git-shell did not go well with various
other platforms and compilers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Playing with linker games to shrink git-shell did not go well with various
other platforms and compilers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix use of hardlinks in "make install"
The code failed to filter-out git-add properly on platforms were $X is
not empty (ATM there is only one such a platform).
Than it tried to create a hardlink to the file ($execdir/git-add) it just
removed (because git-add is first in the BUILT_INS), so ln failed (but
because stderr was redirected into /dev/null the error was never seen), and
the whole install ended up using "ln -s" instead.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code failed to filter-out git-add properly on platforms were $X is
not empty (ATM there is only one such a platform).
Than it tried to create a hardlink to the file ($execdir/git-add) it just
removed (because git-add is first in the BUILT_INS), so ln failed (but
because stderr was redirected into /dev/null the error was never seen), and
the whole install ended up using "ln -s" instead.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fixup_pack_header_footer(): use nicely aligned buffer sizes
It should be more efficient to use nicely aligned buffer sizes, either
for filesystem operations or SHA1 checksums. Also, using a relatively
small nominal size might allow for the data to remain in L1 cache
between both SHA1_Update() calls.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It should be more efficient to use nicely aligned buffer sizes, either
for filesystem operations or SHA1 checksums. Also, using a relatively
small nominal size might allow for the data to remain in L1 cache
between both SHA1_Update() calls.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
index-pack: use fixup_pack_header_footer()'s validation mode
When completing a thin pack, a new header has to be written to
the pack and a new SHA1 computed. Make sure that the SHA1 of what
is being read back matches the SHA1 of what was written for both:
the original pack and the appended objects.
To do so, a couple write_or_die() calls were converted to sha1write()
which has the advantage of doing some buffering as well as handling
SHA1 and CRC32 checksum already.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When completing a thin pack, a new header has to be written to
the pack and a new SHA1 computed. Make sure that the SHA1 of what
is being read back matches the SHA1 of what was written for both:
the original pack and the appended objects.
To do so, a couple write_or_die() calls were converted to sha1write()
which has the advantage of doing some buffering as well as handling
SHA1 and CRC32 checksum already.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: use fixup_pack_header_footer()'s validation mode
When limiting the pack size, a new header has to be written to the
pack and a new SHA1 computed. Make sure that the SHA1 of what is being
read back matches the SHA1 of what was written.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When limiting the pack size, a new header has to be written to the
pack and a new SHA1 computed. Make sure that the SHA1 of what is being
read back matches the SHA1 of what was written.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
improve reliability of fixup_pack_header_footer()
Currently, this function has the potential to read corrupted pack data
from disk and give it a valid SHA1 checksum. Let's add the ability to
validate SHA1 checksum of existing data along the way, including before
and after any arbitrary point in the pack.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, this function has the potential to read corrupted pack data
from disk and give it a valid SHA1 checksum. Let's add the ability to
validate SHA1 checksum of existing data along the way, including before
and after any arbitrary point in the pack.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: improve returned information from write_one()
This function returns 0 when the current object couldn't be written
due to the pack size limit, otherwise the current offset in the pack.
There is a problem with this approach however, since current object
could be a delta and its delta base might just have been written in
the same write_one() call, but those successfully written objects are
not accounted in the offset variable tracked by the caller. Currently
this is not an issue but a subsequent patch will need this.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function returns 0 when the current object couldn't be written
due to the pack size limit, otherwise the current offset in the pack.
There is a problem with this approach however, since current object
could be a delta and its delta base might just have been written in
the same write_one() call, but those successfully written objects are
not accounted in the offset variable tracked by the caller. Currently
this is not an issue but a subsequent patch will need this.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>