verify-pack: migrate to parse-options
OPT__VERBOSE introduces the long option (--verbose) in addition to the
already present short option (-v), so document this new addition.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPT__VERBOSE introduces the long option (--verbose) in addition to the
already present short option (-v), so document this new addition.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-tag: migrate to parse-options
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write-tree: migrate to parse-options
A check for extra options has been dropped, it could never be triggered
in the original code as the usage message would be printed instead.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A check for extra options has been dropped, it could never be triggered
in the original code as the usage message would be printed instead.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: install 'git' in execdir
When a git command executes a subcommand, it uses the "git
foo" form, which relies on finding "git" in the PATH.
Normally this should not be a problem, since the same "git"
that was used to invoke git in the first place will be
found. And if somebody invokes a "git" outside of the PATH
(e.g., by giving its absolute path), this case is already
covered: we put that absolute path onto the front of PATH.
However, if one is using "sudo", then sudo will execute the
"git" from the PATH, but pass along a restricted PATH that
may not contain the original "git" directory. In this case,
executing a subcommand will fail.
To solve this, we put the "git" wrapper itself into the
execdir; this directory is prepended to the PATH when git
starts, so the wrapper will always be found.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a git command executes a subcommand, it uses the "git
foo" form, which relies on finding "git" in the PATH.
Normally this should not be a problem, since the same "git"
that was used to invoke git in the first place will be
found. And if somebody invokes a "git" outside of the PATH
(e.g., by giving its absolute path), this case is already
covered: we put that absolute path onto the front of PATH.
However, if one is using "sudo", then sudo will execute the
"git" from the PATH, but pass along a restricted PATH that
may not contain the original "git" directory. In this case,
executing a subcommand will fail.
To solve this, we put the "git" wrapper itself into the
execdir; this directory is prepended to the PATH when git
starts, so the wrapper will always be found.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'ld/push-porcelain-output-format'
* ld/push-porcelain-output-format:
add --porcelain option to git-push
* ld/push-porcelain-output-format:
add --porcelain option to git-push
Merge branch 'gb/gitweb-avatar'
* gb/gitweb-avatar:
gitweb: add empty alt text to avatar img
gitweb: picon avatar provider
gitweb: gravatar url cache
gitweb: (gr)avatar support
gitweb: use git_print_authorship_rows in 'tag' view too
gitweb: uniform author info for commit and commitdiff
gitweb: refactor author name insertion
* gb/gitweb-avatar:
gitweb: add empty alt text to avatar img
gitweb: picon avatar provider
gitweb: gravatar url cache
gitweb: (gr)avatar support
gitweb: use git_print_authorship_rows in 'tag' view too
gitweb: uniform author info for commit and commitdiff
gitweb: refactor author name insertion
Merge branch 'ml/http'
* ml/http:
http.c: add http.sslCertPasswordProtected option
http.c: prompt for SSL client certificate password
Conflicts:
http.c
* ml/http:
http.c: add http.sslCertPasswordProtected option
http.c: prompt for SSL client certificate password
Conflicts:
http.c
Merge branch 'rs/grep-p'
* rs/grep-p:
grep: simplify -p output
grep -p: support user defined regular expressions
grep: add option -p/--show-function
grep: handle pre context lines on demand
grep: print context hunk marks between files
grep: move context hunk mark handling into show_line()
userdiff: add xdiff_clear_find_func()
* rs/grep-p:
grep: simplify -p output
grep -p: support user defined regular expressions
grep: add option -p/--show-function
grep: handle pre context lines on demand
grep: print context hunk marks between files
grep: move context hunk mark handling into show_line()
userdiff: add xdiff_clear_find_func()
Merge branch 'js/run-command-updates' (early part)
* 'js/run-command-updates' (early part):
MinGW: truncate exit()'s argument to lowest 8 bits
* 'js/run-command-updates' (early part):
MinGW: truncate exit()'s argument to lowest 8 bits
git-svn.txt: fix description of fetch flags accepted by clone.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Yann Dirson <ydirson@altern.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn.txt: fix fetch flags incorrectly documented as init flags.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Yann Dirson <ydirson@altern.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn.txt: make formatting more consistent.
- correctly link paragraphs within list items
- consistently format examples
- put option alernatives on separate lines
- always use [verse] for config items
- always indent 1st paragraph of a list item, with a tab
Signed-off-by: Yann Dirson <ydirson@altern.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- correctly link paragraphs within list items
- consistently format examples
- put option alernatives on separate lines
- always use [verse] for config items
- always indent 1st paragraph of a list item, with a tab
Signed-off-by: Yann Dirson <ydirson@altern.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn.txt: stop using dash-form of commands.
Also consistently use single quotes around git commands to make things clear
(was only needed at a couple of places).
Signed-off-by: Yann Dirson <ydirson@altern.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also consistently use single quotes around git commands to make things clear
(was only needed at a couple of places).
Signed-off-by: Yann Dirson <ydirson@altern.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
Documentation: update description of shell aliases
* maint:
Documentation: update description of shell aliases
Merge branch 'cb/maint-fetch-refspec-wo-dst' into maint
* cb/maint-fetch-refspec-wo-dst:
fetch: do not create ref from empty name
* cb/maint-fetch-refspec-wo-dst:
fetch: do not create ref from empty name
Merge branch 'cf/maint-remote-uploadpack-useconfig-fix' into maint
* cf/maint-remote-uploadpack-useconfig-fix:
git-remote: fix missing .uploadpack usage for show command
* cf/maint-remote-uploadpack-useconfig-fix:
git-remote: fix missing .uploadpack usage for show command
Documentation: update description of shell aliases
Aliases that invoke shell commands start from the top-level directory,
but this was not documented.
Signed-off-by: Sitaram Chamarty <sitaramc@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aliases that invoke shell commands start from the top-level directory,
but this was not documented.
Signed-off-by: Sitaram Chamarty <sitaramc@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: __git_config_get_set_variables() handle values with spaces
Commit 0065236 (bash completion: complete variable names for "git
config" with options 2009-05-08) implemented its config variable search
wrong. When a config contains a value with a space and a period (.) in
it, completion erroneously thinks that line in the configuration is
multiple config variables.
For example
$ cat .git/config
format.cc = Junio C Hamano <gitster@pobox.com>
$ git config --unset <TAB>
format.cc
<gitster@pobox.com>
Instead of using a for loop splitting across spaces, pipe each line to a
while read loop and beef up the case statement to match only
'config.variable=value'.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0065236 (bash completion: complete variable names for "git
config" with options 2009-05-08) implemented its config variable search
wrong. When a config contains a value with a space and a period (.) in
it, completion erroneously thinks that line in the configuration is
multiple config variables.
For example
$ cat .git/config
format.cc = Junio C Hamano <gitster@pobox.com>
$ git config --unset <TAB>
format.cc
<gitster@pobox.com>
Instead of using a for loop splitting across spaces, pipe each line to a
while read loop and beef up the case statement to match only
'config.variable=value'.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'tr/die_errno'
* tr/die_errno:
Use die_errno() instead of die() when checking syscalls
Convert existing die(..., strerror(errno)) to die_errno()
die_errno(): double % in strerror() output just in case
Introduce die_errno() that appends strerror(errno) to die()
* tr/die_errno:
Use die_errno() instead of die() when checking syscalls
Convert existing die(..., strerror(errno)) to die_errno()
die_errno(): double % in strerror() output just in case
Introduce die_errno() that appends strerror(errno) to die()
Merge branch 'cb/maint-fetch-refspec-wo-dst'
* cb/maint-fetch-refspec-wo-dst:
fetch: do not create ref from empty name
* cb/maint-fetch-refspec-wo-dst:
fetch: do not create ref from empty name
Merge branch 'sb/show-ref-parse-options'
* sb/show-ref-parse-options:
show-ref: migrate to parse-options
* sb/show-ref-parse-options:
show-ref: migrate to parse-options
Merge branch 'gb/am-foreign'
* gb/am-foreign:
git-am: refactor 'cleaning up and aborting'
git-am foreign patch support: StGIT support
git-am foreign patch support: autodetect some patch formats
git-am foreign patch support: introduce patch_format
* gb/am-foreign:
git-am: refactor 'cleaning up and aborting'
git-am foreign patch support: StGIT support
git-am foreign patch support: autodetect some patch formats
git-am foreign patch support: introduce patch_format
Merge branch 'jk/use-our-regexp'
* jk/use-our-regexp:
Makefile: Solaris needs HAVE_ALLOCA_H for alloca()
Makefile: use compat regex on Solaris
Makefile: refactor regex compat support
* jk/use-our-regexp:
Makefile: Solaris needs HAVE_ALLOCA_H for alloca()
Makefile: use compat regex on Solaris
Makefile: refactor regex compat support
Merge branch 'uk/rev-parse-parse-opt'
* uk/rev-parse-parse-opt:
parse-opt: make PARSE_OPT_STOP_AT_NON_OPTION available to git rev-parse
more tests for git rev-parse --parse-opt
* uk/rev-parse-parse-opt:
parse-opt: make PARSE_OPT_STOP_AT_NON_OPTION available to git rev-parse
more tests for git rev-parse --parse-opt
Avoid generating a warning if $fullname{$file} is undefined
Signed-off-by: Nick Woolley <git.wu-lee@noodlefactory.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nick Woolley <git.wu-lee@noodlefactory.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove archaic use of regex capture \1 in favour of $1
Using it will generate a perl warning "\1 better written as $1".
Signed-off-by: Nick Woolley <git.wu-lee@noodlefactory.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using it will generate a perl warning "\1 better written as $1".
Signed-off-by: Nick Woolley <git.wu-lee@noodlefactory.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: Add --full-diff to log options
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the Unix epoch to be a valid commit date
It is common practice to use the Unix epoch as a fallback date
when a suitable date is not available. This is true of git svn
and possibly other importing tools that import non-git history
into git.
Instead of clobbering established strtoul() error reporting
semantics with our own, preserve the strtoul() error value
of ULONG_MAX for fsck.c to handle.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is common practice to use the Unix epoch as a fallback date
when a suitable date is not available. This is true of git svn
and possibly other importing tools that import non-git history
into git.
Instead of clobbering established strtoul() error reporting
semantics with our own, preserve the strtoul() error value
of ULONG_MAX for fsck.c to handle.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http-push: fix xml_entities() string parsing overrun
xml_entities() in http-push.c did not properly stop at the end of the
string being examined, which would occasionally cause nonsense to be
appended to escaped URL strings and result in failed DAV XML queries
Signed-off-by: Seth Hunter <hunter@ll.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xml_entities() in http-push.c did not properly stop at the end of the
string being examined, which would occasionally cause nonsense to be
appended to escaped URL strings and result in failed DAV XML queries
Signed-off-by: Seth Hunter <hunter@ll.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MinGW: truncate exit()'s argument to lowest 8 bits
For some reason, MinGW's bash cannot reliably detect failure of the child
process if a negative value is passed to exit(). This fixes it by
truncating the exit code in all calls of exit().
This issue was worked around in run_builtin() of git.c (2488df84 builtin
run_command: do not exit with -1, 2007-11-15). This workaround is no longer
necessary and is reverted.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some reason, MinGW's bash cannot reliably detect failure of the child
process if a negative value is passed to exit(). This fixes it by
truncating the exit code in all calls of exit().
This issue was worked around in run_builtin() of git.c (2488df84 builtin
run_command: do not exit with -1, 2007-11-15). This workaround is no longer
necessary and is reverted.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: simplify -p output
It was found a bit too loud to show == separators between the function
headers.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was found a bit too loud to show == separators between the function
headers.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove filename from conflict markers
Put filenames into the conflict markers only when they are different.
Otherwise they are redundant information clutter.
Print the filename explicitely when warning about a binary conflict.
Signed-off-by: Martin Renold <martinxyz@gmx.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Put filenames into the conflict markers only when they are different.
Otherwise they are redundant information clutter.
Print the filename explicitely when warning about a binary conflict.
Signed-off-by: Martin Renold <martinxyz@gmx.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'cc/bisect'
* cc/bisect:
Documentation: remove warning saying that "git bisect skip" may slow bisection
bisect: use a PRNG with a bias when skipping away from untestable commits
* cc/bisect:
Documentation: remove warning saying that "git bisect skip" may slow bisection
bisect: use a PRNG with a bias when skipping away from untestable commits
Merge branch 'js/daemon-log'
* js/daemon-log:
receive-pack: do not send error details to the client
upload-pack: squelch progress indicator if client cannot see it
daemon: send stderr of service programs to the syslog
* js/daemon-log:
receive-pack: do not send error details to the client
upload-pack: squelch progress indicator if client cannot see it
daemon: send stderr of service programs to the syslog
Merge branch 'cf/maint-remote-uploadpack-useconfig-fix'
* cf/maint-remote-uploadpack-useconfig-fix:
git-remote: fix missing .uploadpack usage for show command
* cf/maint-remote-uploadpack-useconfig-fix:
git-remote: fix missing .uploadpack usage for show command
Merge branch 'sb/quiet-porcelains'
* sb/quiet-porcelains:
stash: teach quiet option
am, rebase: teach quiet option
submodule, repack: migrate to git-sh-setup's say()
git-sh-setup: introduce say() for quiet options
am: suppress apply errors when using 3-way
t4150: test applying with a newline in subject
* sb/quiet-porcelains:
stash: teach quiet option
am, rebase: teach quiet option
submodule, repack: migrate to git-sh-setup's say()
git-sh-setup: introduce say() for quiet options
am: suppress apply errors when using 3-way
t4150: test applying with a newline in subject
Merge branch 'ne/maint-1.6.0-diff-tree-t-r-show-directory'
* ne/maint-1.6.0-diff-tree-t-r-show-directory:
diff-tree -r -t: include added/removed directories in the output
* ne/maint-1.6.0-diff-tree-t-r-show-directory:
diff-tree -r -t: include added/removed directories in the output
Merge branch 'maint'
* maint:
request-pull: really really disable pager
* maint:
request-pull: really really disable pager
grep -p: support user defined regular expressions
Respect the userdiff attributes and config settings when looking for
lines with function definitions in git grep -p.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Respect the userdiff attributes and config settings when looking for
lines with function definitions in git grep -p.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: add option -p/--show-function
The new option -p instructs git grep to print the previous function
definition as a context line, similar to diff -p. Such context lines
are marked with an equal sign instead of a dash. This option
complements the existing context options -A, -B, -C.
Function definitions are detected using the same heuristic that diff
uses. User defined regular expressions are not supported, yet.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option -p instructs git grep to print the previous function
definition as a context line, similar to diff -p. Such context lines
are marked with an equal sign instead of a dash. This option
complements the existing context options -A, -B, -C.
Function definitions are detected using the same heuristic that diff
uses. User defined regular expressions are not supported, yet.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: handle pre context lines on demand
Factor out pre context line handling into the new function
show_pre_context() and change the algorithm to rewind by looking for
newline characters and roll forward again, instead of maintaining an
array of line beginnings and ends.
This is slower for hits, but the cost for non-matching lines becomes
zero. Normally, there are far more non-matching lines, so the time
spent in total decreases.
Before this patch (current Linux kernel repo, best of five runs):
$ time git grep --no-ext-grep -B1 memset >/dev/null
real 0m2.134s
user 0m1.932s
sys 0m0.196s
$ time git grep --no-ext-grep -B1000 memset >/dev/null
real 0m12.059s
user 0m11.837s
sys 0m0.224s
The same with this patch:
$ time git grep --no-ext-grep -B1 memset >/dev/null
real 0m2.117s
user 0m1.892s
sys 0m0.228s
$ time git grep --no-ext-grep -B1000 memset >/dev/null
real 0m2.986s
user 0m2.696s
sys 0m0.288s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out pre context line handling into the new function
show_pre_context() and change the algorithm to rewind by looking for
newline characters and roll forward again, instead of maintaining an
array of line beginnings and ends.
This is slower for hits, but the cost for non-matching lines becomes
zero. Normally, there are far more non-matching lines, so the time
spent in total decreases.
Before this patch (current Linux kernel repo, best of five runs):
$ time git grep --no-ext-grep -B1 memset >/dev/null
real 0m2.134s
user 0m1.932s
sys 0m0.196s
$ time git grep --no-ext-grep -B1000 memset >/dev/null
real 0m12.059s
user 0m11.837s
sys 0m0.224s
The same with this patch:
$ time git grep --no-ext-grep -B1 memset >/dev/null
real 0m2.117s
user 0m1.892s
sys 0m0.228s
$ time git grep --no-ext-grep -B1000 memset >/dev/null
real 0m2.986s
user 0m2.696s
sys 0m0.288s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: print context hunk marks between files
Print a hunk mark before matches from a new file are shown, in addition
to the current behaviour of printing them if lines have been skipped.
The result is easier to read, as (presumably unrelated) matches from
different files are separated by a hunk mark. GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print a hunk mark before matches from a new file are shown, in addition
to the current behaviour of printing them if lines have been skipped.
The result is easier to read, as (presumably unrelated) matches from
different files are separated by a hunk mark. GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: move context hunk mark handling into show_line()
Move last_shown into struct grep_opt, to make it available in
show_line(), and then make the function handle the printing of hunk
marks for context lines in a central place.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move last_shown into struct grep_opt, to make it available in
show_line(), and then make the function handle the printing of hunk
marks for context lines in a central place.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
userdiff: add xdiff_clear_find_func()
xdiff_set_find_func() is used to set user defined regular expressions
for finding function signatures. Add xdiff_clear_find_func(), which
frees the memory allocated by the former, making the API complete.
Also, use the new function in diff.c (the only call site of
xdiff_set_find_func()) to clean up after ourselves.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xdiff_set_find_func() is used to set user defined regular expressions
for finding function signatures. Add xdiff_clear_find_func(), which
frees the memory allocated by the former, making the API complete.
Also, use the new function in diff.c (the only call site of
xdiff_set_find_func()) to clean up after ourselves.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
request-pull: really really disable pager
Earlier 476cc72 (request-pull: really disable pager, 2009-06-30)
tried to use the correct environment variable to disable paging
from multiple calls to "git log" and friends, but there was one
extra call to "git log" that was not covered by the trick.
Move the setting and exporting of GIT_PAGER much earlier in the
script to cover everybody.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier 476cc72 (request-pull: really disable pager, 2009-06-30)
tried to use the correct environment variable to disable paging
from multiple calls to "git log" and friends, but there was one
extra call to "git log" that was not covered by the trick.
Move the setting and exporting of GIT_PAGER much earlier in the
script to cover everybody.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
log-tree: fix confusing comment
This comment mentions the case where use_terminator is set,
but this case is not handled at all by this chunk of code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This comment mentions the case where use_terminator is set,
but this case is not handled at all by this chunk of code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
attr: plug minor memory leak
request-pull: really disable pager
Makes some cleanup/review in gittutorial
Makefile: git.o depends on library headers
git-submodule documentation: fix foreach example
* maint:
attr: plug minor memory leak
request-pull: really disable pager
Makes some cleanup/review in gittutorial
Makefile: git.o depends on library headers
git-submodule documentation: fix foreach example
attr: plug minor memory leak
Free the memory allocated for struct strbuf pathbuf when we're done.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Free the memory allocated for struct strbuf pathbuf when we're done.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git.c: avoid allocating one-too-many elements for new argv array
When creating a new argv array from a configured alias and the supplied
command line arguments, the new argv was allocated with one element too
many. Since the first element of the original argv array is skipped when
copying it to the new_argv, the number of elements that are allocated
should be reduced by one. 'count' is the number of elements that new_argv
contains, and *argcp is the number of elements in the original argv array.
So the total allocation (including the terminating NULL entry) for the
new_argv array should be:
count + (*argcp - 1) + 1
Also, the explicit assignment of the NULL terminating entry can be avoided
by just copying it over from the original argv array.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a new argv array from a configured alias and the supplied
command line arguments, the new argv was allocated with one element too
many. Since the first element of the original argv array is skipped when
copying it to the new_argv, the number of elements that are allocated
should be reduced by one. 'count' is the number of elements that new_argv
contains, and *argcp is the number of elements in the original argv array.
So the total allocation (including the terminating NULL entry) for the
new_argv array should be:
count + (*argcp - 1) + 1
Also, the explicit assignment of the NULL terminating entry can be avoided
by just copying it over from the original argv array.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
request-pull: really disable pager
ff06c74 (Improve request-pull to handle non-rebased branches, 2007-05-01)
attempted to disable pager when running subcommands in this script, but
with a wrong variable. If GIT_PAGER is set, it takes precedence over
PAGER.
Noticed by Michal Marek.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ff06c74 (Improve request-pull to handle non-rebased branches, 2007-05-01)
attempted to disable pager when running subcommands in this script, but
with a wrong variable. If GIT_PAGER is set, it takes precedence over
PAGER.
Noticed by Michal Marek.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-mv: fix directory separator treatment on Windows
The following invocations did not work as expected on Windows:
git mv foo\bar dest
git mv foo\ dest
The first command was interpreted as
git mv foo/bar dest/foo/bar
because the Windows style directory separator was not obeyed when the
basename of 'foo\bar' was computed.
The second command failed because the Windows style directory separator was
not removed from the source directory, whereupon the lookup of the
directory in the index failed.
This fixes both issues by using is_dir_sep() and basename().
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following invocations did not work as expected on Windows:
git mv foo\bar dest
git mv foo\ dest
The first command was interpreted as
git mv foo/bar dest/foo/bar
because the Windows style directory separator was not obeyed when the
basename of 'foo\bar' was computed.
The second command failed because the Windows style directory separator was
not removed from the source directory, whereupon the lookup of the
directory in the index failed.
This fixes both issues by using is_dir_sep() and basename().
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: add missing config variables
Update to include branch.*.rebase, remote.*.pushurl, and
add.ignore-errors
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update to include branch.*.rebase, remote.*.pushurl, and
add.ignore-errors
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makes some cleanup/review in gittutorial
There are some different but little cleanup changes to fix some missing
quotes, to fix what seemed to be an unended sentence, to reident a
little paragraph with too large a sentence and fix a branch name that
was referred to twice later by another name.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some different but little cleanup changes to fix some missing
quotes, to fix what seemed to be an unended sentence, to reident a
little paragraph with too large a sentence and fix a branch name that
was referred to twice later by another name.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: git.o depends on library headers
This dependency was not yet specified anywhere else.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This dependency was not yet specified anywhere else.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-submodule documentation: fix foreach example
Backtick and apostrophe are asciidoc markup, so they should be escaped
in order to get the expected result in the rendered manual page.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Backtick and apostrophe are asciidoc markup, so they should be escaped
in order to get the expected result in the rendered manual page.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: add empty alt text to avatar img
The empty alt text optimizes screen estate in text-only browsers.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The empty alt text optimizes screen estate in text-only browsers.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: picon avatar provider
Simple implementation of picon that only relies on the indiana.edu
database.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simple implementation of picon that only relies on the indiana.edu
database.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: gravatar url cache
Views which contain many occurrences of the same email address (e.g.
shortlog view) benefit from not having to recalculate the MD5 of the
email address every time.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Views which contain many occurrences of the same email address (e.g.
shortlog view) benefit from not having to recalculate the MD5 of the
email address every time.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: (gr)avatar support
Introduce avatar support: the feature adds the appropriate img tag next
to author and committer in commit(diff), history, shortlog, log and tag
views. Multiple avatar providers are possible, but only gravatar is
implemented at the moment.
Gravatar support depends on Digest::MD5, which is a core package since
Perl 5.8. If gravatars are activated but Digest::MD5 cannot be found,
the feature will be automatically disabled.
No avatar provider is selected by default, except in the t9500 test.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce avatar support: the feature adds the appropriate img tag next
to author and committer in commit(diff), history, shortlog, log and tag
views. Multiple avatar providers are possible, but only gravatar is
implemented at the moment.
Gravatar support depends on Digest::MD5, which is a core package since
Perl 5.8. If gravatars are activated but Digest::MD5 cannot be found,
the feature will be automatically disabled.
No avatar provider is selected by default, except in the t9500 test.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: use git_print_authorship_rows in 'tag' view too
parse_tag must be adapted to use the hash keys expected by
git_print_authorship_rows. This is not a problem since git_tag is the
only user of this sub.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_tag must be adapted to use the hash keys expected by
git_print_authorship_rows. This is not a problem since git_tag is the
only user of this sub.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: uniform author info for commit and commitdiff
Switch from 'log'-like layout
A U Thor <email@example.com> [date time]
to 'commit'-like layout
author A U Thor <email@example.com>
date time
committer C O Mitter <other.email@example.com>
committer date time
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch from 'log'-like layout
A U Thor <email@example.com> [date time]
to 'commit'-like layout
author A U Thor <email@example.com>
date time
committer C O Mitter <other.email@example.com>
committer date time
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: refactor author name insertion
Collect all author display code in appropriate functions, making it
easier to extend these functions on the CGI side.
We also move some of the presentation code from hard-coded HTML to CSS,
for easier customization.
A side effect of the refactoring is that now localtime is always
displayed with the 'at night' warning.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Collect all author display code in appropriate functions, making it
easier to extend these functions on the CGI side.
We also move some of the presentation code from hard-coded HTML to CSS,
for easier customization.
A side effect of the refactoring is that now localtime is always
displayed with the 'at night' warning.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git log: add '--merges' flag to match '--no-merges'
I do various statistics on git, and one of the things I look at is merges,
because they are often interesting events to count ("how many merges vs
how much 'real development'" kind of statistics). And you can do it with
some fairly straightforward scripting, ie
git rev-list --parents HEAD |
grep ' .* ' |
git diff-tree --always -s --pretty=oneline --stdin |
less -S
will do it.
But I finally got irritated with the fact that we can skip merges with
'--no-merges', but we can't do the trivial reverse operation.
So this just adds a '--merges' flag that _only_ shows merges. Now you can
do the above with just a
git log --merges --pretty=oneline
which is a lot simpler. It also means that we automatically get a lot of
statistics for free, eg
git shortlog -ns --merges
does exactly what you'd want it to do.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I do various statistics on git, and one of the things I look at is merges,
because they are often interesting events to count ("how many merges vs
how much 'real development'" kind of statistics). And you can do it with
some fairly straightforward scripting, ie
git rev-list --parents HEAD |
grep ' .* ' |
git diff-tree --always -s --pretty=oneline --stdin |
less -S
will do it.
But I finally got irritated with the fact that we can skip merges with
'--no-merges', but we can't do the trivial reverse operation.
So this just adds a '--merges' flag that _only_ shows merges. Now you can
do the above with just a
git log --merges --pretty=oneline
which is a lot simpler. It also means that we automatically get a lot of
statistics for free, eg
git shortlog -ns --merges
does exactly what you'd want it to do.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
add --porcelain option to git-push
If --porcelain is used git-push will produce machine-readable output. The
output status line for each ref will be tab-separated and sent to stdout instead
of stderr. The full symbolic names of the refs will be given. For example
$ git push --dry-run --porcelain master :foobar 2>/dev/null \
| perl -pe 's/\t/ TAB /g'
= TAB refs/heads/master:refs/heads/master TAB [up to date]
- TAB :refs/heads/foobar TAB [deleted]
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --porcelain is used git-push will produce machine-readable output. The
output status line for each ref will be tab-separated and sent to stdout instead
of stderr. The full symbolic names of the refs will be given. For example
$ git push --dry-run --porcelain master :foobar 2>/dev/null \
| perl -pe 's/\t/ TAB /g'
= TAB refs/heads/master:refs/heads/master TAB [up to date]
- TAB :refs/heads/foobar TAB [deleted]
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge git://git.bogomips.org/git-svn
* git://git.bogomips.org/git-svn:
git svn: Doc update for multiple branch and tag paths
git svn: cleanup t9138-multiple-branches
git-svn: Canonicalize svn urls to prevent libsvn assertion
t9138: remove stray dot in test which broke bash
git-svn: convert globs to regexps for branch destinations
git svn: Support multiple branch and tag paths in the svn repository.
Add 'git svn reset' to unwind 'git svn fetch'
git-svn: speed up find_rev_before
Add 'git svn help [cmd]' which works outside a repo.
git-svn: let 'dcommit $rev' work on $rev instead of HEAD
* git://git.bogomips.org/git-svn:
git svn: Doc update for multiple branch and tag paths
git svn: cleanup t9138-multiple-branches
git-svn: Canonicalize svn urls to prevent libsvn assertion
t9138: remove stray dot in test which broke bash
git-svn: convert globs to regexps for branch destinations
git svn: Support multiple branch and tag paths in the svn repository.
Add 'git svn reset' to unwind 'git svn fetch'
git-svn: speed up find_rev_before
Add 'git svn help [cmd]' which works outside a repo.
git-svn: let 'dcommit $rev' work on $rev instead of HEAD
git svn: Doc update for multiple branch and tag paths
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
git svn: cleanup t9138-multiple-branches
Using the "svn_cmd" wrapper instead of "svn" alone allows tests
to run consistently for users with customized
~/.subversion/configs. Additionally, using subshells via
"(cd ...)" allow cleaner and less error-prone tests to
be written.
[ew: expanded commit message]
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Using the "svn_cmd" wrapper instead of "svn" alone allows tests
to run consistently for users with customized
~/.subversion/configs. Additionally, using subshells via
"(cd ...)" allow cleaner and less error-prone tests to
be written.
[ew: expanded commit message]
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Merge branch 'pb/send-email-cccmd-fix'
* pb/send-email-cccmd-fix:
t/t9001-send-email.sh: ensure generated script is executed with $SHELL_PATH
* pb/send-email-cccmd-fix:
t/t9001-send-email.sh: ensure generated script is executed with $SHELL_PATH
Merge branch 'maint'
* maint:
gitweb/README: fix AliasMatch in example
Test grep --and/--or/--not
Test git archive --remote
fread does not return negative on error
* maint:
gitweb/README: fix AliasMatch in example
Test grep --and/--or/--not
Test git archive --remote
fread does not return negative on error
gitweb/README: fix AliasMatch in example
When combining "dumb client" and human-friendly access by using the
'.git' extension to switch between the two, make sure the AliasMatch
covers the entire request. Without a full match, a request for
http://git.example.com/project/shortlog/branch..gitsomething
would result in a 404 because the server would try to access the
the project 'project/shortlog/branch.'
The solution is still not bulletproof, so document the possible failing
case.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When combining "dumb client" and human-friendly access by using the
'.git' extension to switch between the two, make sure the AliasMatch
covers the entire request. Without a full match, a request for
http://git.example.com/project/shortlog/branch..gitsomething
would result in a 404 because the server would try to access the
the project 'project/shortlog/branch.'
The solution is still not bulletproof, so document the possible failing
case.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test grep --and/--or/--not
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test git archive --remote
Add a small test case for git archive --remote (and thus
git-upload-archive), which so far went untested.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a small test case for git archive --remote (and thus
git-upload-archive), which so far went untested.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use die_errno() instead of die() when checking syscalls
Lots of die() calls did not actually report the kind of error, which
can leave the user confused as to the real problem. Use die_errno()
where we check a system/library call that sets errno on failure, or
one of the following that wrap such calls:
Function Passes on error from
-------- --------------------
odb_pack_keep open
read_ancestry fopen
read_in_full xread
strbuf_read xread
strbuf_read_file open or strbuf_read_file
strbuf_readlink readlink
write_in_full xwrite
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lots of die() calls did not actually report the kind of error, which
can leave the user confused as to the real problem. Use die_errno()
where we check a system/library call that sets errno on failure, or
one of the following that wrap such calls:
Function Passes on error from
-------- --------------------
odb_pack_keep open
read_ancestry fopen
read_in_full xread
strbuf_read xread
strbuf_read_file open or strbuf_read_file
strbuf_readlink readlink
write_in_full xwrite
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert existing die(..., strerror(errno)) to die_errno()
Change calls to die(..., strerror(errno)) to use the new die_errno().
In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change calls to die(..., strerror(errno)) to use the new die_errno().
In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
die_errno(): double % in strerror() output just in case
[tr: handle border case where % is placed at end of buffer]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[tr: handle border case where % is placed at end of buffer]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce die_errno() that appends strerror(errno) to die()
There are many calls to die() that do, or should, report
strerror(errno) to indicate how the syscall they guard failed.
Introduce a small helper function for this case.
Note:
- POSIX says vsnprintf can modify errno in some unlikely cases, so we
have to use errno early.
- We take some care to pass the original format to die_routine(), in
case someone wants to call die_errno() with custom format
characters.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many calls to die() that do, or should, report
strerror(errno) to indicate how the syscall they guard failed.
Introduce a small helper function for this case.
Note:
- POSIX says vsnprintf can modify errno in some unlikely cases, so we
have to use errno early.
- We take some care to pass the original format to die_routine(), in
case someone wants to call die_errno() with custom format
characters.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: Canonicalize svn urls to prevent libsvn assertion
Cloning/initializing svn repositories with an uncanonicalize url
does not work as libsvn throws an assertion. This patch
canonicalize svn uris for the clone and init command from
git-svn.
[ew: fixed trailing whitespace]
Signed-off-by: Ulrich Dangel <uli@spamt.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Cloning/initializing svn repositories with an uncanonicalize url
does not work as libsvn throws an assertion. This patch
canonicalize svn uris for the clone and init command from
git-svn.
[ew: fixed trailing whitespace]
Signed-off-by: Ulrich Dangel <uli@spamt.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
t9138: remove stray dot in test which broke bash
The stray dot broke bash and probably some other shells,
but worked fine with dash in my limited testing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The stray dot broke bash and probably some other shells,
but worked fine with dash in my limited testing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
git-remote: fix missing .uploadpack usage for show command
For users pulling from machines with self compiled git installs,
in non-PATH locations, they can set the config option
remote.<name>.uploadpack to set the location of git-upload-pack.
When using 'git remote show <name>', the remote HEAD check
did not use the uploadpack configuration setting, and would
not use the configured program.
In builtin-remote.c, the config setting is already loaded
with the call to remote_get(), so this patch passes that remote
along to transport_get().
Signed-off-by: Chris Frey <cdfrey@foursquare.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For users pulling from machines with self compiled git installs,
in non-PATH locations, they can set the config option
remote.<name>.uploadpack to set the location of git-upload-pack.
When using 'git remote show <name>', the remote HEAD check
did not use the uploadpack configuration setting, and would
not use the configured program.
In builtin-remote.c, the config setting is already loaded
with the call to remote_get(), so this patch passes that remote
along to transport_get().
Signed-off-by: Chris Frey <cdfrey@foursquare.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: convert globs to regexps for branch destinations
Marc Branchaud wrote:
> I'm fairly happy with this, except for the way the branch
> subcommand matches refspecs. The patch does a simple string
> comparison, but it'd be better to do an actual glob. I just
> couldn't track down the right function for that, so I left it as
> a strcmp and hope that a gitizen can tell me how to glob here.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Marc Branchaud wrote:
> I'm fairly happy with this, except for the way the branch
> subcommand matches refspecs. The patch does a simple string
> comparison, but it'd be better to do an actual glob. I just
> couldn't track down the right function for that, so I left it as
> a strcmp and hope that a gitizen can tell me how to glob here.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
git svn: Support multiple branch and tag paths in the svn repository.
This enables git-svn.perl to read multiple 'branches' and 'tags' entries in
svn-remote config sections. The init and clone subcommands also support
multiple --branches and --tags arguments.
The branch (and tag) subcommand gets a new argument: --destination (or -d).
This argument is required if there are multiple branches (or tags) entries
configured for the remote Subversion repository. The argument's value
specifies which branch (or tag) path to use to create the branch (or tag).
The specified value must match the left side (without wildcards) of one of
the branches (or tags) refspecs in the svn-remote's config.
[ew: avoided explicit loop when combining globs with "push"]
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
This enables git-svn.perl to read multiple 'branches' and 'tags' entries in
svn-remote config sections. The init and clone subcommands also support
multiple --branches and --tags arguments.
The branch (and tag) subcommand gets a new argument: --destination (or -d).
This argument is required if there are multiple branches (or tags) entries
configured for the remote Subversion repository. The argument's value
specifies which branch (or tag) path to use to create the branch (or tag).
The specified value must match the left side (without wildcards) of one of
the branches (or tags) refspecs in the svn-remote's config.
[ew: avoided explicit loop when combining globs with "push"]
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Add 'git svn reset' to unwind 'git svn fetch'
Add a command to unwind the effects of fetch by moving the rev_map
and refs/remotes/git-svn back to an old SVN revision. This allows
revisions to be re-fetched. Ideally SVN revs would be immutable,
but permissions changes in the SVN repository or indiscriminate use
of '--ignore-paths' can create situations where fetch cannot make
progress.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Add a command to unwind the effects of fetch by moving the rev_map
and refs/remotes/git-svn back to an old SVN revision. This allows
revisions to be re-fetched. Ideally SVN revs would be immutable,
but permissions changes in the SVN repository or indiscriminate use
of '--ignore-paths' can create situations where fetch cannot make
progress.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn: speed up find_rev_before
By limiting start revision of find_rev_before to max existing
revision. This avoids a long wait if you do
'git svn reset -r 9999999'. The linear search within the
contiguous revisions doesn't seem to be a problem.
[ew: expanded commit message]
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
By limiting start revision of find_rev_before to max existing
revision. This avoids a long wait if you do
'git svn reset -r 9999999'. The linear search within the
contiguous revisions doesn't seem to be a problem.
[ew: expanded commit message]
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Add 'git svn help [cmd]' which works outside a repo.
Previously there was no explicit 'help' command, but 'git svn help'
still printed the usage message (as an invalid command), provided you
got past the initialization steps that required a valid repo.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Previously there was no explicit 'help' command, but 'git svn help'
still printed the usage message (as an invalid command), provided you
got past the initialization steps that required a valid repo.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn: let 'dcommit $rev' work on $rev instead of HEAD
'git svn dcommit' takes an optional revision argument, but the meaning
of it was rather scary. It completely ignored the current state of
the HEAD, only looking at the revisions between SVN and $rev. If HEAD
was attached to $branch, the branch lost all commits $rev..$branch in
the process.
Considering that 'git svn dcommit HEAD^' has the intuitive meaning
"dcommit all changes on my branch except the last one", we change the
meaning of the revision argument. git-svn temporarily checks out $rev
for its work, meaning that
* if a branch is specified, that branch (_not_ the HEAD) is rebased as
part of the dcommit,
* if some other revision is specified, as in the example, all work
happens on a detached HEAD and no branch is affected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
'git svn dcommit' takes an optional revision argument, but the meaning
of it was rather scary. It completely ignored the current state of
the HEAD, only looking at the revisions between SVN and $rev. If HEAD
was attached to $branch, the branch lost all commits $rev..$branch in
the process.
Considering that 'git svn dcommit HEAD^' has the intuitive meaning
"dcommit all changes on my branch except the last one", we change the
meaning of the revision argument. git-svn temporarily checks out $rev
for its work, meaning that
* if a branch is specified, that branch (_not_ the HEAD) is rebased as
part of the dcommit,
* if some other revision is specified, as in the example, all work
happens on a detached HEAD and no branch is affected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
fread does not return negative on error
size_t res cannot be less than 0. fread returns 0 on error.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
size_t res cannot be less than 0. fread returns 0 on error.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-remote: (get_one_entry): use strbuf
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/t9001-send-email.sh: ensure generated script is executed with $SHELL_PATH
If the shell is not specified using the '#!' notation, then the OS will
use '/bin/sh' to execute the script which may not produce the desired
results. In particular, /bin/sh on Solaris interprets '^' specially which
has an effect on the sed command that this patch touches.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the shell is not specified using the '#!' notation, then the OS will
use '/bin/sh' to execute the script which may not produce the desired
results. In particular, /bin/sh on Solaris interprets '^' specially which
has an effect on the sed command that this patch touches.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
t3700-add: add a POSIXPERM prerequisite to a new test
* maint:
t3700-add: add a POSIXPERM prerequisite to a new test
t3700-add: add a POSIXPERM prerequisite to a new test
The new test does a 'chmod 0', which does not have the intended
effect on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new test does a 'chmod 0', which does not have the intended
effect on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'sb/maint-1.6.0-add-config-fix' into maint
* sb/maint-1.6.0-add-config-fix:
add: allow configurations to be overriden by command line
* sb/maint-1.6.0-add-config-fix:
add: allow configurations to be overriden by command line
Sync with 1.6.3.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT 1.6.3.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'ak/maint-for-each-ref-no-lookup' into maint
* ak/maint-for-each-ref-no-lookup:
for-each-ref: Do not lookup objects when they will not be used
* ak/maint-for-each-ref-no-lookup:
for-each-ref: Do not lookup objects when they will not be used
Merge branch 'rc/maint-http-local-slot-fix' into maint
* rc/maint-http-local-slot-fix:
http*: cleanup slot->local after fclose
* rc/maint-http-local-slot-fix:
http*: cleanup slot->local after fclose
Merge branch 'cb/maint-no-double-merge' into maint
* cb/maint-no-double-merge:
refuse to merge during a merge
* cb/maint-no-double-merge:
refuse to merge during a merge
Merge branch 'mn/maint-iconv-autoconf' into maint
* mn/maint-iconv-autoconf:
fix handling of iconv configuration options
* mn/maint-iconv-autoconf:
fix handling of iconv configuration options
Merge branch 'lt/maint-unsigned-left-shift' into maint
* lt/maint-unsigned-left-shift:
Fix big left-shifts of unsigned char
* lt/maint-unsigned-left-shift:
Fix big left-shifts of unsigned char
Merge branch 'pb/maint-1.6.2-userdiff-fix' into maint
* pb/maint-1.6.2-userdiff-fix:
upload-archive: fix infinite loop on Cygwin
avoid exponential regex match for java and objc function names
* pb/maint-1.6.2-userdiff-fix:
upload-archive: fix infinite loop on Cygwin
avoid exponential regex match for java and objc function names
receive-pack: do not send error details to the client
If the objects that a client pushes to the server cannot be processed for
any reason, an error is reported back to the client via the git protocol.
We used to send quite detailed information if a system call failed if
unpack-objects is run. This can be regarded as an information leak. Now we
do not send any error details like we already do in the case where
index-pack failed.
Errors in system calls as well as the exit code of unpack-objects and
index-pack are now reported to stderr; in the case of a local push or via
ssh these messages still go to the client, but that is OK since these forms
of access to the server assume that the client can be trusted. If
receive-pack is run from git-daemon, then the daemon should put the error
messages into the syslog.
With this reasoning a new status report is added for the post-update-hook;
untrusted (i.e. daemon's) clients cannot observe its status anyway, others
may want to know failure details.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the objects that a client pushes to the server cannot be processed for
any reason, an error is reported back to the client via the git protocol.
We used to send quite detailed information if a system call failed if
unpack-objects is run. This can be regarded as an information leak. Now we
do not send any error details like we already do in the case where
index-pack failed.
Errors in system calls as well as the exit code of unpack-objects and
index-pack are now reported to stderr; in the case of a local push or via
ssh these messages still go to the client, but that is OK since these forms
of access to the server assume that the client can be trusted. If
receive-pack is run from git-daemon, then the daemon should put the error
messages into the syslog.
With this reasoning a new status report is added for the post-update-hook;
untrusted (i.e. daemon's) clients cannot observe its status anyway, others
may want to know failure details.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>