Code

git.git
14 years agoMerge branch 'maint'
Junio C Hamano [Thu, 15 Jul 2010 19:04:32 +0000 (12:04 -0700)]
Merge branch 'maint'

* maint:
  Documentation: add submodule.* to the big configuration variable list
  gitmodules.5: url can be a relative path
  gitweb: fix esc_url

14 years agoDocumentation: add submodule.* to the big configuration variable list
Jonathan Nieder [Thu, 15 Jul 2010 07:51:19 +0000 (02:51 -0500)]
Documentation: add submodule.* to the big configuration variable list

The url, path, and the update items in [submodule "foo"] stanzas
are nicely explained in the .gitmodules and ‘git submodule’
documentation.  Point there from the config documentation.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agogitmodules.5: url can be a relative path
Jonathan Nieder [Thu, 15 Jul 2010 07:41:55 +0000 (02:41 -0500)]
gitmodules.5: url can be a relative path

There is already excellent documentation for this facility in
git-submodule.1, but it is not so discoverable.

Relative paths in .gitmodules can be useful for serving the
same repository over multiple protocols, for example.
Thanks to Peter for pointing this out.

Cc: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agogitweb: fix esc_url
Pavan Kumar Sunkara [Thu, 15 Jul 2010 07:29:01 +0000 (12:59 +0530)]
gitweb: fix esc_url

Earlier, 452e225 (gitweb: fix esc_param, 2009-10-13) fixed CGI escaping
rules used in esc_url.  A very similar logic exists in esc_param and needs
to be fixed the same way.

Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoGit 1.7.2-rc3 v1.7.2-rc3
Junio C Hamano [Wed, 14 Jul 2010 16:42:24 +0000 (09:42 -0700)]
Git 1.7.2-rc3

Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoMerge branch 'jc/read-tree-cache-tree-fix'
Junio C Hamano [Wed, 14 Jul 2010 16:34:23 +0000 (09:34 -0700)]
Merge branch 'jc/read-tree-cache-tree-fix'

* jc/read-tree-cache-tree-fix:
  Fix "read-tree -m A B" priming the cache-tree

14 years agoUse dev_t for device id (st_dev) from stat in setup_git_directory_gently()
Raja R Harinath [Tue, 13 Jul 2010 09:02:00 +0000 (14:32 +0530)]
Use dev_t for device id (st_dev) from stat in setup_git_directory_gently()

The original declaration was int, which seems to cause trouble on my
machine.  It causes spurious "filesystem boundary" errors when running
the testsuite.  The cause seems to be

  $ stat -c%d .
  2147549952

which is too large for a 32-bit int type.

Using the correct type, dev_t, solves the issue.  (Because I'm
paranoid and forgetful, I checked -- yes, Unix v7 had dev_t.)

Other uses of st_dev seem to be reasonably safe.   fill_stat_cache_info
truncates it to an 'unsigned int', but that value seems to be used only
to validate the cache, and only if USE_STDEV is defined.

Signed-off-by: Raja R Harinath <harinath@hurrynot.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoMerge branch 'maint'
Junio C Hamano [Tue, 13 Jul 2010 16:14:35 +0000 (09:14 -0700)]
Merge branch 'maint'

* maint:
  git fetch documentation: describe short '-p' synonym to '--prune' option
  format-patch: document the format.to configuration setting

14 years agogit fetch documentation: describe short '-p' synonym to '--prune' option
Oren Held [Tue, 13 Jul 2010 12:01:40 +0000 (15:01 +0300)]
git fetch documentation: describe short '-p' synonym to '--prune' option

It's already implemented, just undocumented.

Signed-off-by: Oren Held <orenhe@il.ibm.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoformat-patch: document the format.to configuration setting
Miklos Vajna [Mon, 12 Jul 2010 18:58:38 +0000 (20:58 +0200)]
format-patch: document the format.to configuration setting

[jc: with simplification from Jonathan Nieder]

Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agotest-lib: TAP compliance for skipping tests on request
Michael J Gruber [Mon, 12 Jul 2010 10:33:49 +0000 (12:33 +0200)]
test-lib: TAP compliance for skipping tests on request

Make the output TAP compliant for tests skipped on request (GIT_SKIP_TESTS).

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agotest-lib: simplify GIT_SKIP_TESTS loop
Michael J Gruber [Mon, 12 Jul 2010 10:32:18 +0000 (12:32 +0200)]
test-lib: simplify GIT_SKIP_TESTS loop

04ece59 (GIT_SKIP_TESTS: allow users to omit tests that are known to break, 2006-12-28)
introduced GIT_SKIP_TESTS, and since then we have had two nested loops
iterating over GIT_SKIP_TESTS with the same loop variable.

Reduce this to one loop.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoMerge branch 'maint'
Junio C Hamano [Mon, 12 Jul 2010 06:47:29 +0000 (23:47 -0700)]
Merge branch 'maint'

* maint:
  Documentation: Spelling fix in protocol-capabilities.txt
  checkout: accord documentation to what git does
  t0005: work around strange $? in ksh when program terminated by a signal

14 years agoDocumentation: Spelling fix in protocol-capabilities.txt
Fredrik Skolmli [Sat, 10 Jul 2010 00:00:01 +0000 (02:00 +0200)]
Documentation: Spelling fix in protocol-capabilities.txt

Signed-off-by: Fredrik Skolmli <fredrik@frsk.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agocheckout: accord documentation to what git does
Nicolas Sebrecht [Fri, 9 Jul 2010 20:27:48 +0000 (22:27 +0200)]
checkout: accord documentation to what git does

Signed-off-by: Nicolas Sebrecht <nicolas.s.dev@gmx.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agot0005: work around strange $? in ksh when program terminated by a signal
Johannes Sixt [Fri, 9 Jul 2010 07:05:16 +0000 (09:05 +0200)]
t0005: work around strange $? in ksh when program terminated by a signal

ksh93 is known to report $? of programs that terminated by a signal as
256 + signal number instead of 128 + signal number like other POSIX
compliant shells (ksh's behavior is still POSIX compliant in this regard).

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoMerge remote branch 'ko/master' into jc/read-tree-cache-tree-fix
Junio C Hamano [Fri, 9 Jul 2010 01:55:50 +0000 (18:55 -0700)]
Merge remote branch 'ko/master' into jc/read-tree-cache-tree-fix

* ko/master: (2325 commits)
  Git 1.7.2-rc2
  backmerge a few more fixes to 1.7.1.X series
  fix git branch -m in presence of cross devices
  t/t0006: specify timezone as EST5 not EST to comply with POSIX
  add missing && to submodule-merge testcase
  t/README: document more test helpers
  test-date: fix sscanf type conversion
  xdiff: optimise for no whitespace difference when ignoring whitespace.
  gitweb: Move evaluate_gitweb_config out of run_request
  parse_date: fix signedness in timezone calculation
  t0006: test timezone parsing
  rerere.txt: Document forget subcommand
  t/README: proposed rewording...
  t/README: Document the do's and don'ts of tests
  t/README: Add a section about skipping tests
  t/README: Document test_expect_code
  t/README: Document test_external*
  t/README: Document the prereq functions, and 3-arg test_*
  t/README: Typo: paralell -> parallel
  t/README: The trash is in 't/trash directory.$name'
  ...

Conflicts:
builtin-read-tree.c

14 years agodiff.c: fix a graph output bug
Bo Yang [Thu, 8 Jul 2010 15:12:34 +0000 (23:12 +0800)]
diff.c: fix a graph output bug

When --graph is in effect, the line-prefix typically has colored graph
line segments and ends with reset.  The color sequence "set" given to
this function is for showing the metainfo part of the patch text and
(1) it should not be applied to the graph lines, and (2) it will be
reset at the end of line_prefix so it won't be in effect anyway.

Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agotests: Use skip_all=* to skip tests
Ævar Arnfjörð Bjarmason [Thu, 8 Jul 2010 01:16:06 +0000 (01:16 +0000)]
tests: Use skip_all=* to skip tests

Change tests to skip with skip_all=* + test_done instead of using say
+ test_done.

This is a follow-up to "tests: Skip tests in a way that makes sense
under TAP" (fadb5156e4). I missed these cases when prepearing that
patch, hopefully this is all of them.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoFix "read-tree -m A B" priming the cache-tree
Junio C Hamano [Fri, 9 Jul 2010 00:27:43 +0000 (17:27 -0700)]
Fix "read-tree -m A B" priming the cache-tree

In 456156d a shortcut to priming the index tree reference was
introduced, but the justification for it was completely bogus.

"read-tree -m A B" is to take the index (and the working tree)
that is largely based on (but does not have to match exactly) A
and update it to B, while carrying the local change that does
not overlap the difference between A and B, so there is no reason
to expect that the resulting index should match the tree B.

Noticed and test provided by Heiko Voigt.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agot9118 (git-svn): prevent early failure from taking down later tests
Jonathan Nieder [Thu, 8 Jul 2010 13:36:02 +0000 (08:36 -0500)]
t9118 (git-svn): prevent early failure from taking down later tests

When test #2 fails, the cwd is project/, causing all the
remaining tests in the same script to get confused and fail.

So in the spirit of v1.7.1.1~53^2~10 (t5550-http-fetch: Use subshell
for repository operations, 2010-04-17), use a subshell for svn
working copy operations.  This way, the cwd will reliably return
to the top of the trash directory and later tests can still be run
when a command has failed.

Reported-by: A Large Angry SCM <gitzilla@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
14 years agot9118: avoid PEG revision identifier in tests
Michael J Gruber [Thu, 8 Jul 2010 19:16:35 +0000 (21:16 +0200)]
t9118: avoid PEG revision identifier in tests

@ is SVN's identifier for PEG revisions. But SVN's treatment of PEG
identifiers in copy target URLs changed in r954995/r952973, i.e. between
1.6.11 and 1.6.12. They get eaten now (which is considered the right
way).

Therefore, avoid the @ in the tests with funky branch names.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
14 years agoGit 1.7.2-rc2 v1.7.2-rc2
Junio C Hamano [Wed, 7 Jul 2010 18:19:42 +0000 (11:19 -0700)]
Git 1.7.2-rc2

Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoMerge branch 'ab/tap'
Junio C Hamano [Wed, 7 Jul 2010 18:18:44 +0000 (11:18 -0700)]
Merge branch 'ab/tap'

* ab/tap:
  t/README: document more test helpers
  t/README: proposed rewording...
  t/README: Document the do's and don'ts of tests
  t/README: Add a section about skipping tests
  t/README: Document test_expect_code
  t/README: Document test_external*
  t/README: Document the prereq functions, and 3-arg test_*
  t/README: Typo: paralell -> parallel
  t/README: The trash is in 't/trash directory.$name'
  t/t9700/test.pl: don't access private object members, use public access methods
  t9700: Use Test::More->builder, not $Test::Builder::Test
  tests: Say "pass" rather than "ok" on empty lines for TAP
  tests: Skip tests in a way that makes sense under TAP
  test-lib: output a newline before "ok" under a TAP harness
  test-lib: Make the test_external_* functions TAP-aware
  test-lib: Adjust output to be valid TAP format

14 years agoMerge branch 'maint'
Junio C Hamano [Wed, 7 Jul 2010 18:18:26 +0000 (11:18 -0700)]
Merge branch 'maint'

* maint:
  backmerge a few more fixes to 1.7.1.X series
  rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
  fix git branch -m in presence of cross devices

Conflicts:
RelNotes
builtin/rev-parse.c

14 years agobackmerge a few more fixes to 1.7.1.X series
Junio C Hamano [Wed, 7 Jul 2010 17:36:19 +0000 (10:36 -0700)]
backmerge a few more fixes to 1.7.1.X series

Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoMerge branch 'maint-1.6.4' into maint
Junio C Hamano [Wed, 7 Jul 2010 18:13:40 +0000 (11:13 -0700)]
Merge branch 'maint-1.6.4' into maint

* maint-1.6.4:
  rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option

14 years agorev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
Uwe Kleine-König [Tue, 6 Jul 2010 14:46:05 +0000 (16:46 +0200)]
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option

The ?: operator has a lower priority than |, so the implicit associativity
made the 6th argument of parse_options be PARSE_OPT_KEEP_DASHDASH if
keep_dashdash was true discarding PARSE_OPT_STOP_AT_NON_OPTION and
PARSE_OPT_SHELL_EVAL.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoMerge branch 'mg/doc-rev-parse-treepath-syntax' into maint
Junio C Hamano [Wed, 7 Jul 2010 17:34:04 +0000 (10:34 -0700)]
Merge branch 'mg/doc-rev-parse-treepath-syntax' into maint

* mg/doc-rev-parse-treepath-syntax:
  git-rev-parse.txt: Add more examples for caret and colon
  git-rev-parse.txt: Document ":path" specifier

14 years agoMerge branch 'tr/receive-pack-aliased-update-fix' into maint
Junio C Hamano [Wed, 7 Jul 2010 17:25:15 +0000 (10:25 -0700)]
Merge branch 'tr/receive-pack-aliased-update-fix' into maint

* tr/receive-pack-aliased-update-fix:
  check_aliased_update: strcpy() instead of strcat() to copy
  receive-pack: detect aliased updates which can occur with symrefs
  receive-pack: switch global variable 'commands' to a parameter

Conflicts:
t/t5516-fetch-push.sh

14 years agofix git branch -m in presence of cross devices
Pierre Habouzit [Wed, 7 Jul 2010 07:47:20 +0000 (09:47 +0200)]
fix git branch -m in presence of cross devices

When you have for example a bare repository stored on NFS, and that you
create new workdirs locally (using contrib's git-new-workdir), logs/refs
is a symlink to a different device. Hence when the reflogs are renamed,
all must happen below logs/refs or one gets cross device rename errors
like:

  git branch -m foo
  error: unable to move logfile logs/refs/heads/master to tmp-renamed-log: Invalid cross-device link
  fatal: Branch rename failed

The fix is hence to use logs/refs/.tmp-renamed-log as a temporary log
name, instead of just tmp-renamed-log.

Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agot/t0006: specify timezone as EST5 not EST to comply with POSIX
Brandon Casey [Tue, 6 Jul 2010 23:34:20 +0000 (18:34 -0500)]
t/t0006: specify timezone as EST5 not EST to comply with POSIX

POSIX requires that both the timezone "standard" and "offset" be specified
in the TZ environment variable.  This causes a problem on IRIX which does
not understand the timezone 'EST'.

Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoMerge branch 'maint'
Junio C Hamano [Wed, 7 Jul 2010 04:29:21 +0000 (21:29 -0700)]
Merge branch 'maint'

* maint:
  add missing && to submodule-merge testcase
  test-date: fix sscanf type conversion

14 years agoadd missing && to submodule-merge testcase
Heiko Voigt [Tue, 6 Jul 2010 19:34:31 +0000 (21:34 +0200)]
add missing && to submodule-merge testcase

Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agot/README: document more test helpers
Jonathan Nieder [Tue, 6 Jul 2010 20:04:10 +0000 (15:04 -0500)]
t/README: document more test helpers

There is no documentation in t/README for test_must_fail,
test_might_fail, test_cmp, or test_when_finished.

Reported-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agotest-date: fix sscanf type conversion
Jeff King [Tue, 6 Jul 2010 07:54:33 +0000 (03:54 -0400)]
test-date: fix sscanf type conversion

Reading into a time_t isn't portable, since we don't know
the exact type. Instead, use an unsigned long, which is what
show_date wants, anyway.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoMerge branch 'maint'
Junio C Hamano [Tue, 6 Jul 2010 06:33:07 +0000 (23:33 -0700)]
Merge branch 'maint'

* maint:
  xdiff: optimise for no whitespace difference when ignoring whitespace.

14 years agoxdiff: optimise for no whitespace difference when ignoring whitespace.
Dylan Reid [Tue, 6 Jul 2010 03:11:17 +0000 (23:11 -0400)]
xdiff: optimise for no whitespace difference when ignoring whitespace.

In xdl_recmatch, do the memcmp to check if the two lines are equal before
checking if whitespace flags are set.  If the lines are identical, then
there is no need to check if they differ only in whitespace.
This makes the common case (there is no whitespace difference) faster.
It costs the case where lines are the same length and contain
whitespace differences, but the common case is more than 20% faster.

Signed-off-by: Dylan Reid <dgreid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agogitweb: Move evaluate_gitweb_config out of run_request
Jakub Narebski [Mon, 5 Jul 2010 18:52:43 +0000 (20:52 +0200)]
gitweb: Move evaluate_gitweb_config out of run_request

Move evaluate_gitweb_config() and evaluate_git_version() out of
run_request() to run(), making them not run one for each request.
This changes how git behaves in FastCGI case.

This change makes it impossible to have config which changes with
request, but I don't think anyone relied on such (hidden action)
behavior.

While at it, reset timer and number of git commands at beginning of
run_request() in new reset_timer() subroutine.  This fixes case when
gitweb was run using FastCGI interface: time is reported for request,
and not for single run of gitweb script.  This changes slightly
behavior in non-FastCGI case: the number of git commands reported is
1 less (running `git --version` one per gitweb is not counted now).

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoparse_date: fix signedness in timezone calculation
Jeff King [Sun, 4 Jul 2010 11:00:17 +0000 (07:00 -0400)]
parse_date: fix signedness in timezone calculation

When no timezone is specified, we deduce the offset by
subtracting the result of mktime from our calculated
timestamp.

However, our timestamp is stored as an unsigned integer,
meaning we perform the subtraction as unsigned. For a
negative offset, this means we wrap to a very high number,
and our numeric timezone is in the millions of hours. You
can see this bug by doing:

   $ TZ=EST \
     GIT_AUTHOR_DATE='2010-06-01 10:00' \
     git commit -a -m foo
   $ git cat-file -p HEAD | grep author
   author Jeff King <peff@peff.net> 1275404416 +119304128

Instead, we should perform this subtraction as a time_t, the
same type that mktime returns.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoMerge branch 'maint'
Junio C Hamano [Mon, 5 Jul 2010 18:56:53 +0000 (11:56 -0700)]
Merge branch 'maint'

* maint:
  t0006: test timezone parsing
  rerere.txt: Document forget subcommand
  Documentation/git-gc.txt: add reference to githooks

14 years agot0006: test timezone parsing
Jeff King [Sun, 4 Jul 2010 10:48:35 +0000 (06:48 -0400)]
t0006: test timezone parsing

Previously, test-date simply ignored the parsed timezone and
told show_date() to use UTC. Instead, let's print out what
we actually parsed.

While we're at it, let's make it easy for tests to work in a specific
timezone.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agorerere.txt: Document forget subcommand
Michael J Gruber [Mon, 5 Jul 2010 13:15:20 +0000 (15:15 +0200)]
rerere.txt: Document forget subcommand

dea4562 (rerere forget path: forget recorded resolution, 2009-12-25)
introduced the forget subcommand for rerere.

Document it.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agot/README: proposed rewording...
Junio C Hamano [Mon, 5 Jul 2010 18:37:30 +0000 (11:37 -0700)]
t/README: proposed rewording...

Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agot/README: Document the do's and don'ts of tests
Ævar Arnfjörð Bjarmason [Fri, 2 Jul 2010 14:59:49 +0000 (14:59 +0000)]
t/README: Document the do's and don'ts of tests

Add a "Do's, don'ts & things to keep in mind" subsection to the
"Writing Tests" documentation. Much of this is based on Junio C
Hamano's "Test your stuff" section in
<7vhbkj2kcr.fsf@alter.siamese.dyndns.org>.

I turned it into a list of do's and don'ts to make it easier to skim
it, and integrated my note that a TAP harness will get confused if you
print "ok" or "not ok" at the beginning of a line.

Thad had to be fixed in 335f87871fe5aa6b3fd55b2b4e80f16fe9681483 when
TAP support was introduced.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agot/README: Add a section about skipping tests
Ævar Arnfjörð Bjarmason [Fri, 2 Jul 2010 14:59:48 +0000 (14:59 +0000)]
t/README: Add a section about skipping tests

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agot/README: Document test_expect_code
Ævar Arnfjörð Bjarmason [Fri, 2 Jul 2010 14:59:47 +0000 (14:59 +0000)]
t/README: Document test_expect_code

test_expect_code (which was introduced in d3bfdb75) never had any
documentation.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agot/README: Document test_external*
Ævar Arnfjörð Bjarmason [Fri, 2 Jul 2010 14:59:46 +0000 (14:59 +0000)]
t/README: Document test_external*

There was do documentation for the test_external_without_stderr and
test_external functions.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agot/README: Document the prereq functions, and 3-arg test_*
Ævar Arnfjörð Bjarmason [Fri, 2 Jul 2010 14:59:45 +0000 (14:59 +0000)]
t/README: Document the prereq functions, and 3-arg test_*

There was no documentation for the test_set_prereq and
test_have_prereq functions, or the three-arg form of
test_expect_success and test_expect_failure.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agot/README: Typo: paralell -> parallel
Ævar Arnfjörð Bjarmason [Fri, 2 Jul 2010 14:59:44 +0000 (14:59 +0000)]
t/README: Typo: paralell -> parallel

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agot/README: The trash is in 't/trash directory.$name'
Ævar Arnfjörð Bjarmason [Fri, 2 Jul 2010 14:59:43 +0000 (14:59 +0000)]
t/README: The trash is in 't/trash directory.$name'

There's a unique trash directory for each test, not a single directory
as the previous documentation suggested.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoDocumentation/git-gc.txt: add reference to githooks
Chris Packham [Wed, 30 Jun 2010 20:41:27 +0000 (13:41 -0700)]
Documentation/git-gc.txt: add reference to githooks

This advertises the existence of the 'pre-auto-gc' hook and adds a cross
reference to where the hook is documented.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoUpdates from the list to 1.7.2 Release Notes
Junio C Hamano [Fri, 2 Jul 2010 17:29:07 +0000 (10:29 -0700)]
Updates from the list to 1.7.2 Release Notes

Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoGit 1.7.2-rc1 v1.7.2-rc1
Junio C Hamano [Wed, 30 Jun 2010 19:22:13 +0000 (12:22 -0700)]
Git 1.7.2-rc1

Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agogit.spec.in: Add gitweb subpackage
Junio C Hamano [Wed, 30 Jun 2010 22:49:07 +0000 (15:49 -0700)]
git.spec.in: Add gitweb subpackage

Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoMerge branch 'ar/decorate-color'
Junio C Hamano [Wed, 30 Jun 2010 18:55:40 +0000 (11:55 -0700)]
Merge branch 'ar/decorate-color'

* ar/decorate-color:
  Add test for correct coloring of git log --decoration
  Allow customizable commit decorations colors
  log --decorate: Colorize commit decorations
  log-tree.c: Use struct name_decoration's type for classifying decoration
  commit.h: add 'type' to struct name_decoration

14 years agoMerge branch 'mg/doc-rev-parse-treepath-syntax'
Junio C Hamano [Wed, 30 Jun 2010 18:55:40 +0000 (11:55 -0700)]
Merge branch 'mg/doc-rev-parse-treepath-syntax'

* mg/doc-rev-parse-treepath-syntax:
  git-rev-parse.txt: Add more examples for caret and colon
  git-rev-parse.txt: Document ":path" specifier

14 years agoMerge branch 'cc/cherry-pick-stdin'
Junio C Hamano [Wed, 30 Jun 2010 18:55:39 +0000 (11:55 -0700)]
Merge branch 'cc/cherry-pick-stdin'

* cc/cherry-pick-stdin:
  revert: do not rebuild argv on heap
  revert: accept arbitrary rev-list options
  t3508 (cherry-pick): futureproof against unmerged files

14 years agoMerge branch 'jl/status-ignore-submodules'
Junio C Hamano [Wed, 30 Jun 2010 18:55:39 +0000 (11:55 -0700)]
Merge branch 'jl/status-ignore-submodules'

* jl/status-ignore-submodules:
  Add the option "--ignore-submodules" to "git status"
  git submodule: ignore dirty submodules for summary and status

Conflicts:
builtin/commit.c
t/t7508-status.sh
wt-status.c
wt-status.h

14 years agoMerge branch 'jk/url-decode'
Junio C Hamano [Wed, 30 Jun 2010 18:55:38 +0000 (11:55 -0700)]
Merge branch 'jk/url-decode'

* jk/url-decode:
  url_decode: URL scheme ends with a colon and does not require a slash

14 years agoMerge branch 'jn/grep-open'
Junio C Hamano [Wed, 30 Jun 2010 18:55:38 +0000 (11:55 -0700)]
Merge branch 'jn/grep-open'

* jn/grep-open:
  t/t7811-grep-open.sh: remove broken/redundant creation of fake "less" script
  t/t7811-grep-open.sh: ensure fake "less" is made executable
  t/lib-pager.sh: remove unnecessary '^' from 'expr' regular expression
  grep -O: allow optional argument specifying the pager (or editor)
  grep: Add the option '--open-files-in-pager'
  Unify code paths of threaded greps
  grep: refactor grep_objects loop into its own function

Conflicts:
t/t7006-pager.sh

14 years agoMerge branch 'jp/string-list-api-cleanup'
Junio C Hamano [Wed, 30 Jun 2010 18:55:38 +0000 (11:55 -0700)]
Merge branch 'jp/string-list-api-cleanup'

* jp/string-list-api-cleanup:
  string_list: Fix argument order for string_list_append
  string_list: Fix argument order for string_list_lookup
  string_list: Fix argument order for string_list_insert_at_index
  string_list: Fix argument order for string_list_insert
  string_list: Fix argument order for for_each_string_list
  string_list: Fix argument order for print_string_list

14 years agoMerge branch 'tr/rev-list-count'
Junio C Hamano [Wed, 30 Jun 2010 18:55:38 +0000 (11:55 -0700)]
Merge branch 'tr/rev-list-count'

* tr/rev-list-count:
  bash completion: Support "divergence from upstream" messages in __git_ps1
  rev-list: introduce --count option

Conflicts:
contrib/completion/git-completion.bash

14 years agoMerge branch 'as/maint-completion-set-u-fix'
Junio C Hamano [Wed, 30 Jun 2010 18:55:37 +0000 (11:55 -0700)]
Merge branch 'as/maint-completion-set-u-fix'

* as/maint-completion-set-u-fix:
  bash-completion: Fix __git_ps1 to work with "set -u"

14 years agoMerge branch 'mg/rev-parse-tests'
Junio C Hamano [Wed, 30 Jun 2010 18:55:37 +0000 (11:55 -0700)]
Merge branch 'mg/rev-parse-tests'

* mg/rev-parse-tests:
  t6018: make sure all tested symbolic names are different revs
  t6018: add tests for rev-list's --branches and --tags

14 years agoMerge branch 'jl/maint-diff-ignore-submodules'
Junio C Hamano [Wed, 30 Jun 2010 18:55:37 +0000 (11:55 -0700)]
Merge branch 'jl/maint-diff-ignore-submodules'

* jl/maint-diff-ignore-submodules:
  t4027,4041: Use test -s to test for an empty file
  Add optional parameters to the diff option "--ignore-submodules"
  git diff: rename test that had a conflicting name

14 years agoAdd test for correct coloring of git log --decoration
Nazri Ramliy [Tue, 29 Jun 2010 07:47:08 +0000 (15:47 +0800)]
Add test for correct coloring of git log --decoration

Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoSync with 1.7.1.1
Junio C Hamano [Tue, 29 Jun 2010 18:24:36 +0000 (11:24 -0700)]
Sync with 1.7.1.1

Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agorevert: do not rebuild argv on heap
Jonathan Nieder [Mon, 14 Jun 2010 05:32:09 +0000 (00:32 -0500)]
revert: do not rebuild argv on heap

Set options in struct rev_info directly so we can reuse the
arguments collected from parse_options without modification.

This is just a cleanup; no noticeable change is intended.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoMerge commit 'v1.7.2-rc0~6^2' into cc/cherry-pick-stdin
Junio C Hamano [Tue, 29 Jun 2010 17:20:53 +0000 (10:20 -0700)]
Merge commit 'v1.7.2-rc0~6^2' into cc/cherry-pick-stdin

* commit 'v1.7.2-rc0~6^2':
  DWIM 'git show -5' to 'git show --do-walk -5'
  Documentation/SubmittingPatches: Fix typo in GMail section
  Documentation/config: describe status.submodulesummary

This commit fixes one test in t3508 by making "cherry-pick -<num>"
walk the history.

A test update from Elijah Newren is squashed as an evil merge.

14 years agoGit 1.7.1.1 v1.7.1.1
Junio C Hamano [Tue, 29 Jun 2010 16:59:56 +0000 (09:59 -0700)]
Git 1.7.1.1

Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agot/t9700/test.pl: don't access private object members, use public access methods
Brandon Casey [Mon, 28 Jun 2010 22:51:02 +0000 (17:51 -0500)]
t/t9700/test.pl: don't access private object members, use public access methods

This test is accessing private object members of the Test::More and
Test::Builder objects.  Older versions of Test::More did not implement
these variables using a hash.

My system complains as follows:

   Can't coerce array into hash at <snip>/t/t9700/test.pl line 13.
   BEGIN failed--compilation aborted at <snip>/t/t9700/test.pl line 15.

There are public access methods available for retrieving and setting these
variables, so let's use them instead.

Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agot/t9001: use egrep when regular expressions are involved
Brandon Casey [Mon, 28 Jun 2010 22:46:22 +0000 (17:46 -0500)]
t/t9001: use egrep when regular expressions are involved

Supplying backslashed, extended regular expressions to grep is not
portable.  Use egrep instead.

Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agogit-rev-parse.txt: Add more examples for caret and colon
Michael J Gruber [Mon, 28 Jun 2010 19:01:07 +0000 (21:01 +0200)]
git-rev-parse.txt: Add more examples for caret and colon

Several items in the caret, colon and friends section contain examples
already. Make sure they all come with examples, and that examples come
early so that they serve as a visual guide, as well.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoMerge branch 'maint'
Junio C Hamano [Tue, 29 Jun 2010 00:42:26 +0000 (17:42 -0700)]
Merge branch 'maint'

* maint:
  Update draft release notes to 1.7.1.1
  notes: Initialise variable to appease gcc
  notes: check number of parameters to "git notes copy"

14 years agoUpdate draft release notes to 1.7.1.1
Junio C Hamano [Tue, 29 Jun 2010 00:42:18 +0000 (17:42 -0700)]
Update draft release notes to 1.7.1.1

Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoMerge branch 'tr/send-email-8bit' into maint
Junio C Hamano [Mon, 28 Jun 2010 23:19:03 +0000 (16:19 -0700)]
Merge branch 'tr/send-email-8bit' into maint

* tr/send-email-8bit:
  send-email: ask about and declare 8bit mails

14 years agoMerge branch 'pb/maint-perl-errmsg-no-dir' into maint
Junio C Hamano [Mon, 28 Jun 2010 23:18:58 +0000 (16:18 -0700)]
Merge branch 'pb/maint-perl-errmsg-no-dir' into maint

* pb/maint-perl-errmsg-no-dir:
  Git.pm: better error message

14 years agoMerge branch 'js/maint-am-rebase-invalid-author' into maint
Junio C Hamano [Mon, 28 Jun 2010 23:18:43 +0000 (16:18 -0700)]
Merge branch 'js/maint-am-rebase-invalid-author' into maint

* js/maint-am-rebase-invalid-author:
  am: use get_author_ident_from_commit instead of mailinfo when rebasing

14 years agoMerge branch 'jc/maint-simpler-common-prefix' into maint
Junio C Hamano [Mon, 28 Jun 2010 23:18:15 +0000 (16:18 -0700)]
Merge branch 'jc/maint-simpler-common-prefix' into maint

* jc/maint-simpler-common-prefix:
  common_prefix: simplify and fix scanning for prefixes

14 years agoMerge branch 'bd/maint-unpack-trees-parawalk-fix' into maint
Junio C Hamano [Mon, 28 Jun 2010 23:18:02 +0000 (16:18 -0700)]
Merge branch 'bd/maint-unpack-trees-parawalk-fix' into maint

* bd/maint-unpack-trees-parawalk-fix:
  unpack-trees: Make index lookahead less pessimal

14 years agonotes: Initialise variable to appease gcc
Ramsay Jones [Mon, 21 Jun 2010 18:52:29 +0000 (19:52 +0100)]
notes: Initialise variable to appease gcc

gcc version 3.4.4 thinks that the 'cmp' variable could be used
while uninitialised and complains thus:

    notes.c: In function `write_each_non_note_until':
    notes.c:719: warning: 'cmp' might be used uninitialized in \
        this function

Note that gcc versions 4.1.2 and 4.4.0 do not issue this warning.

Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agonotes: check number of parameters to "git notes copy"
Jeff King [Mon, 28 Jun 2010 08:59:07 +0000 (04:59 -0400)]
notes: check number of parameters to "git notes copy"

Otherwise we may segfault with too few parameters.

Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Bert Wesarg <Bert.Wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agomsvc: Select the "fast" definition of the {get,put}_be32() macros
Ramsay Jones [Wed, 23 Jun 2010 19:47:02 +0000 (20:47 +0100)]
msvc: Select the "fast" definition of the {get,put}_be32() macros

On Intel machines, the msvc compiler defines the CPU architecture
macros _M_IX86 and _M_X64 (equivalent to __i386__ and __x86_64__
respectively). Use these macros in the pre-processor expression
to select the "fast" definition of the {get,put}_be32() macros.

Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agogit-rev-parse.txt: Document ":path" specifier
Michael J Gruber [Sun, 27 Jun 2010 13:15:22 +0000 (15:15 +0200)]
git-rev-parse.txt: Document ":path" specifier

The empty treeish in ":path" means "index". This is actually a special
case of the ":stage:path" syntax where it is documented, but mentioning
it also together with "treeish:path" is helpful, so do it.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoGit 1.7.2-rc0 v1.7.2-rc0
Junio C Hamano [Sun, 27 Jun 2010 19:01:12 +0000 (12:01 -0700)]
Git 1.7.2-rc0

Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoMerge branch 'cp/textconv-cat-file'
Junio C Hamano [Sun, 27 Jun 2010 19:07:55 +0000 (12:07 -0700)]
Merge branch 'cp/textconv-cat-file'

* cp/textconv-cat-file:
  git-cat-file.txt: Document --textconv
  t/t8007: test textconv support for cat-file
  textconv: support for cat_file
  sha1_name: add get_sha1_with_context()

14 years agoMerge branch 'pb/maint-perl-errmsg-no-dir'
Junio C Hamano [Sun, 27 Jun 2010 19:07:45 +0000 (12:07 -0700)]
Merge branch 'pb/maint-perl-errmsg-no-dir'

* pb/maint-perl-errmsg-no-dir:
  Git.pm: better error message

14 years agoMerge branch 'tr/send-email-8bit'
Junio C Hamano [Sun, 27 Jun 2010 19:07:45 +0000 (12:07 -0700)]
Merge branch 'tr/send-email-8bit'

* tr/send-email-8bit:
  send-email: ask about and declare 8bit mails

14 years agoMerge branch 'js/maint-am-rebase-invalid-author'
Junio C Hamano [Sun, 27 Jun 2010 19:07:44 +0000 (12:07 -0700)]
Merge branch 'js/maint-am-rebase-invalid-author'

* js/maint-am-rebase-invalid-author:
  am: use get_author_ident_from_commit instead of mailinfo when rebasing

14 years agoMerge branch 'ab/blame-textconv'
Junio C Hamano [Sun, 27 Jun 2010 19:07:44 +0000 (12:07 -0700)]
Merge branch 'ab/blame-textconv'

* ab/blame-textconv:
  t/t8006: test textconv support for blame
  textconv: support for blame
  textconv: make the API public

Conflicts:
diff.h

14 years agoMerge branch 'jn/show-num-walks'
Junio C Hamano [Sun, 27 Jun 2010 19:07:44 +0000 (12:07 -0700)]
Merge branch 'jn/show-num-walks'

* jn/show-num-walks:
  DWIM 'git show -5' to 'git show --do-walk -5'

14 years agot6018: make sure all tested symbolic names are different revs
Michael J Gruber [Fri, 14 May 2010 18:26:51 +0000 (20:26 +0200)]
t6018: make sure all tested symbolic names are different revs

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agot6018: add tests for rev-list's --branches and --tags
Michael J Gruber [Fri, 14 May 2010 18:26:50 +0000 (20:26 +0200)]
t6018: add tests for rev-list's --branches and --tags

so that we know when they break.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agot9700: Use Test::More->builder, not $Test::Builder::Test
Ævar Arnfjörð Bjarmason [Sat, 26 Jun 2010 12:42:41 +0000 (12:42 +0000)]
t9700: Use Test::More->builder, not $Test::Builder::Test

$Test::Builder::Test was only made into an `our' variable in 0.94
released in September 2009, older distros are more likely to have 0.92
or earlier. Use the singleton Test::More->builder constructor instead.

The exit() call was also unportable to <0.94. Just output a meaningful
exit code if the ->is_passing method exists. The t9700-perl-git.sh
test only cares about stderr output, so this doesn't affect test
results when using older Test::More modules.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agoMerge branch 'jp/string-list-api-cleanup' into jn/grep-open
Julian Phillips [Fri, 25 Jun 2010 23:41:39 +0000 (00:41 +0100)]
Merge branch 'jp/string-list-api-cleanup' into jn/grep-open

An evil merge to adjust the series to cleaned-up API.

  From: Julian Phillips <julian@quantumfyre.co.uk>
  Subject: [PATCH v2 7/7] grep: fix string_list_append calls
  Date: Sat, 26 Jun 2010 00:41:39 +0100
  Message-ID: <20100625234140.18927.35025.julian@quantumfyre.co.uk>

* jp/string-list-api-cleanup:
  string_list: Fix argument order for string_list_append
  string_list: Fix argument order for string_list_lookup
  string_list: Fix argument order for string_list_insert_at_index
  string_list: Fix argument order for string_list_insert
  string_list: Fix argument order for for_each_string_list
  string_list: Fix argument order for print_string_list

Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agostring_list: Fix argument order for string_list_append
Julian Phillips [Fri, 25 Jun 2010 23:41:38 +0000 (00:41 +0100)]
string_list: Fix argument order for string_list_append

Update the definition and callers of string_list_append to use the
string_list as the first argument.  This helps make the string_list
API easier to use by being more consistent.

Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agostring_list: Fix argument order for string_list_lookup
Julian Phillips [Fri, 25 Jun 2010 23:41:37 +0000 (00:41 +0100)]
string_list: Fix argument order for string_list_lookup

Update the definition and callers of string_list_lookup to use the
string_list as the first argument.  This helps make the string_list
API easier to use by being more consistent.

Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agostring_list: Fix argument order for string_list_insert_at_index
Julian Phillips [Fri, 25 Jun 2010 23:41:36 +0000 (00:41 +0100)]
string_list: Fix argument order for string_list_insert_at_index

Update the definition and callers of string_list_insert_at_index to
use the string_list as the first argument.  This helps make the
string_list API easier to use by being more consistent.

Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14 years agostring_list: Fix argument order for string_list_insert
Julian Phillips [Fri, 25 Jun 2010 23:41:35 +0000 (00:41 +0100)]
string_list: Fix argument order for string_list_insert

Update the definition and callers of string_list_insert to use the
string_list as the first argument.  This helps make the string_list
API easier to use by being more consistent.

Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>