Makefile: use shell for-loop rather than Make's foreach loop during install
The install target uses a foreach loop to generate a single long shell
command line to handle installation of the built-in git commands. The
maximum length of the argument list varies by platform, and this use of
foreach quickly grows the length of the argument list. Current git can
exceed the default maximum argument list length on IRIX 6.5 of 20480
depending on the installation path.
Rather than using make's foreach loop to pre-generate the shell command
line, use a shell for-loop and allow the shell to iterate through each of
the built-in commands.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The install target uses a foreach loop to generate a single long shell
command line to handle installation of the built-in git commands. The
maximum length of the argument list varies by platform, and this use of
foreach quickly grows the length of the argument list. Current git can
exceed the default maximum argument list length on IRIX 6.5 of 20480
depending on the installation path.
Rather than using make's foreach loop to pre-generate the shell command
line, use a shell for-loop and allow the shell to iterate through each of
the built-in commands.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
use uppercase POSIX compliant signals for the 'trap' command
In 'man 1p trap' there is written:
"Implementations may permit names with the SIG prefix or ignore case
in signal names as an extension."
So change the lowercase signals to uppercase, which is POSIX compliant
instead of being an extension.
There wasn't anybody claiming that it doesn't work, but there was a bug
with using a signal with the SIG prefix, which is an extension as well.
So let's play it safe and change it, since it doesn't hurt anyone.
While at it, also convert 8 indentation spaces to 1 tab character.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 'man 1p trap' there is written:
"Implementations may permit names with the SIG prefix or ignore case
in signal names as an extension."
So change the lowercase signals to uppercase, which is POSIX compliant
instead of being an extension.
There wasn't anybody claiming that it doesn't work, but there was a bug
with using a signal with the SIG prefix, which is an extension as well.
So let's play it safe and change it, since it doesn't hurt anyone.
While at it, also convert 8 indentation spaces to 1 tab character.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib/difftool: remove distracting 'echo' in the SIGINT handler
When interrupting git-difftool with Ctrl-C, the output of this echo
command led to having the cursor at the beginning of the line below the
shell prompt.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When interrupting git-difftool with Ctrl-C, the output of this echo
command led to having the cursor at the beginning of the line below the
shell prompt.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib/difftool: change trap condition from SIGINT to INT
git-difftool worked for me on an up-to-date Gentoo Linux at home, but
didn't work on a somewhat older Ubuntu Linux 7.10 at work and failed
with the following error, where 'Makefile' was locally modified:
trap: 244: SIGINT: bad trap
external diff died, stopping at Makefile.
In 'man 1p trap' there is written:
"The condition can be EXIT, 0 (equivalent to EXIT), or a signal
specified using a symbolic name, without the SIG prefix, [...]"
"Implementations may permit names with the SIG prefix or ignore case
in signal names as an extension."
So now we do it the POSIX compliant way instead of using an extension.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-difftool worked for me on an up-to-date Gentoo Linux at home, but
didn't work on a somewhat older Ubuntu Linux 7.10 at work and failed
with the following error, where 'Makefile' was locally modified:
trap: 244: SIGINT: bad trap
external diff died, stopping at Makefile.
In 'man 1p trap' there is written:
"The condition can be EXIT, 0 (equivalent to EXIT), or a signal
specified using a symbolic name, without the SIG prefix, [...]"
"Implementations may permit names with the SIG prefix or ignore case
in signal names as an extension."
So now we do it the POSIX compliant way instead of using an extension.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: more compact summary and without extra quotes
Update the report format again to save the screen real estates, while
avoiding from enclosing the one-line summary of the commit log inside
double quotes pair, which looks awkward when the message begins or ends
with a double quote. The old format looked like this:
[master]: created d9a5491: "foo:bar"
Simply removing the double quotes were found to be confusing as a message
often begins with a short-word (area of the system) and a colon.
The new format looks like this:
[master d9a5491] foo:bar
As discussed in the git mailing list:
http://thread.gmane.org/gmane.comp.version-control.git/101687/focus=101735
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the report format again to save the screen real estates, while
avoiding from enclosing the one-line summary of the commit log inside
double quotes pair, which looks awkward when the message begins or ends
with a double quote. The old format looked like this:
[master]: created d9a5491: "foo:bar"
Simply removing the double quotes were found to be confusing as a message
often begins with a short-word (area of the system) and a colon.
The new format looks like this:
[master d9a5491] foo:bar
As discussed in the git mailing list:
http://thread.gmane.org/gmane.comp.version-control.git/101687/focus=101735
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'kc/maint-diff-bwi-fix'
* kc/maint-diff-bwi-fix:
test more combinations of ignore-whitespace options to diff
* kc/maint-diff-bwi-fix:
test more combinations of ignore-whitespace options to diff
test more combinations of ignore-whitespace options to diff
There are three flags involved (-w -b and --ignore-space-at-eol) which
makes 8 combinations possible in total, but only 3 cases are tested (none,
-w alone and -b alone).
This adds the other 5 cases.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three flags involved (-w -b and --ignore-space-at-eol) which
makes 8 combinations possible in total, but only 3 cases are tested (none,
-w alone and -b alone).
This adds the other 5 cases.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
shell: Document that 'cvs server' is a valid command
* maint:
shell: Document that 'cvs server' is a valid command
shell: Document that 'cvs server' is a valid command
git-shell's man page explicitly lists all allowed commands, but 'cvs
server' was missing. Add it.
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-shell's man page explicitly lists all allowed commands, but 'cvs
server' was missing. Add it.
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash completion: refactor diff options
diff, log and show all take the same diff options. Refactor them from
__git_diff and __git_log into a variable, and complete them in
__git_show too.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff, log and show all take the same diff options. Refactor them from
__git_diff and __git_log into a variable, and complete them in
__git_show too.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash completion: move pickaxe options to log
Move the options --pickaxe-all and --pickaxe-regex to git-log, where
they make more sense than with git-diff.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the options --pickaxe-all and --pickaxe-regex to git-log, where
they make more sense than with git-diff.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
difftool: put the cursor on the editable file for Vim
You only need to edit worktree files when comparing against
the worktree. Put the cursor automatically into its window for
vimdiff and gvimdiff to avoid doing <C-w>l every time.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You only need to edit worktree files when comparing against
the worktree. Put the cursor automatically into its window for
vimdiff and gvimdiff to avoid doing <C-w>l every time.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
difftool: fix documentation problems
This patch makes the difftool docs always refer to the
git-difftool script using the dashed form of the name.
Only command examples use the non-dashed form now.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes the difftool docs always refer to the
git-difftool script using the dashed form of the name.
Only command examples use the non-dashed form now.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge git://git.bogomips.org/git-svn
* git://git.bogomips.org/git-svn:
git-svn: Show UUID in svn info for added directories with svn 1.5.5
git-svn: avoid importing nested git repos
git-svn: fix SVN 1.1.x compatibility
git-svn: Add --localtime option to "fetch"
git-svn: better attempt to handle broken symlink updates
git-svn: handle empty files marked as symlinks in SVN
* git://git.bogomips.org/git-svn:
git-svn: Show UUID in svn info for added directories with svn 1.5.5
git-svn: avoid importing nested git repos
git-svn: fix SVN 1.1.x compatibility
git-svn: Add --localtime option to "fetch"
git-svn: better attempt to handle broken symlink updates
git-svn: handle empty files marked as symlinks in SVN
git-svn: Show UUID in svn info for added directories with svn 1.5.5
In svn 1.5.5 the output of "svn info" for added directories was changed
and now shows the repository UUID. This patch implements the same
behavior for "git svn info" and makes t9119-git-svn-info.17 pass if
svn 1.5.5 is used.
Signed-off-by: Marcel Koeppen <git-dev@marzelpan.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
In svn 1.5.5 the output of "svn info" for added directories was changed
and now shows the repository UUID. This patch implements the same
behavior for "git svn info" and makes t9119-git-svn-info.17 pass if
svn 1.5.5 is used.
Signed-off-by: Marcel Koeppen <git-dev@marzelpan.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn: avoid importing nested git repos
Some SVN repositories contain git repositories within them
(hopefully accidentally checked in). Since git refuses to track
nested ".git" repositories, this can be a problem when fetching
updates from SVN.
Thanks to Morgan Christiansson for the report and testing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Some SVN repositories contain git repositories within them
(hopefully accidentally checked in). Since git refuses to track
nested ".git" repositories, this can be a problem when fetching
updates from SVN.
Thanks to Morgan Christiansson for the report and testing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
git-svn: fix SVN 1.1.x compatibility
The get_log() function in the Perl SVN API introduced the limit
parameter in 1.2.0. However, this got discarded in our SVN::Ra
compatibility layer when used with SVN 1.1.x. We now emulate
the limit functionality in older SVN versions by preventing the
original callback from being called if the given limit has been
reached. This emulation is less bandwidth efficient, but SVN
1.1.x is becoming rarer now.
Additionally, the --limit parameter in svn(1) uses the
aforementioned get_log() functionality change in SVN 1.2.x.
t9129 no longer depends on --limit to work and instead uses
Perl to parse out the commit message.
Thanks to Tom G. Christensen for the bug report.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The get_log() function in the Perl SVN API introduced the limit
parameter in 1.2.0. However, this got discarded in our SVN::Ra
compatibility layer when used with SVN 1.1.x. We now emulate
the limit functionality in older SVN versions by preventing the
original callback from being called if the given limit has been
reached. This emulation is less bandwidth efficient, but SVN
1.1.x is becoming rarer now.
Additionally, the --limit parameter in svn(1) uses the
aforementioned get_log() functionality change in SVN 1.2.x.
t9129 no longer depends on --limit to work and instead uses
Perl to parse out the commit message.
Thanks to Tom G. Christensen for the bug report.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
git-svn: Add --localtime option to "fetch"
By default git-svn stores timestamps of fetched commits in
Subversion's UTC format. Passing --localtime to fetch will convert
them to the timezone of the server on which git-svn is run.
This makes the timestamps of a resulting "git log" agree with what
"svn log" shows for the same repository.
Signed-off-by: Pete Harlan <pgit@pcharlan.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
By default git-svn stores timestamps of fetched commits in
Subversion's UTC format. Passing --localtime to fetch will convert
them to the timezone of the server on which git-svn is run.
This makes the timestamps of a resulting "git log" agree with what
"svn log" shows for the same repository.
Signed-off-by: Pete Harlan <pgit@pcharlan.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn: better attempt to handle broken symlink updates
This is a followup to 7fc35e0e94782bbbefb920875813519038659930,
(workaround a for broken symlinks in SVN).
Since broken SVN clients can commit svn:special files without
the magic "link " prefix, this can affect delta application
when we update the broken svn:special file. So now we fall
back and retry the delta application on symlinks if having
a "link " prefix fails.
Our behavior differs from svn(1) (v1.5.1) slightly:
When a svn:special file is created w/o a "link " prefix, svn
will create a regular file (mode 100644 to git) with the
contents of the blob as-is.
Our behavior is to continue creating the symlink (mode 120000
to git) with the contents of the blob as-is. While this
differs from current svn(1) behavior, this is easier and more
efficient to implement (and the correctness of the svn(1) is
debatable, since it's a workaround for a bug in the first
place).
More information on this SVN bug is described here:
http://subversion.tigris.org/issues/show_bug.cgi?id=2692
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This is a followup to 7fc35e0e94782bbbefb920875813519038659930,
(workaround a for broken symlinks in SVN).
Since broken SVN clients can commit svn:special files without
the magic "link " prefix, this can affect delta application
when we update the broken svn:special file. So now we fall
back and retry the delta application on symlinks if having
a "link " prefix fails.
Our behavior differs from svn(1) (v1.5.1) slightly:
When a svn:special file is created w/o a "link " prefix, svn
will create a regular file (mode 100644 to git) with the
contents of the blob as-is.
Our behavior is to continue creating the symlink (mode 120000
to git) with the contents of the blob as-is. While this
differs from current svn(1) behavior, this is easier and more
efficient to implement (and the correctness of the svn(1) is
debatable, since it's a workaround for a bug in the first
place).
More information on this SVN bug is described here:
http://subversion.tigris.org/issues/show_bug.cgi?id=2692
Signed-off-by: Eric Wong <normalperson@yhbt.net>
git-svn: handle empty files marked as symlinks in SVN
Broken SVN clients generate empty files with the svn:special set
to '*'. This attempts to denote a symlink pointing to a file
with an empty path (""), which cannot be generated on a POSIX
system.
Thus, we mimic the behavior of svn(1) and create a zero-byte
file in our tree.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Broken SVN clients generate empty files with the svn:special set
to '*'. This attempts to denote a symlink pointing to a file
with an empty path (""), which cannot be generated on a POSIX
system.
Thus, we mimic the behavior of svn(1) and create a zero-byte
file in our tree.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
mergetool: put the cursor on the editable file for Vim
When resolving conflicts, you only need to edit the $MERGED file. Put
the cursor automatically into its window for vimdiff and gvimdiff to
avoid doing <C-w>l every time.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Tested-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When resolving conflicts, you only need to edit the $MERGED file. Put
the cursor automatically into its window for vimdiff and gvimdiff to
avoid doing <C-w>l every time.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Tested-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7700: demonstrate misbehavior of 'repack -a' when local packs exist
The ability to "...fatten [the] local repository by packing everything that
is needed by the local ref into a single new pack, including things that are
borrowed from alternates"[1] is supposed to be provided by the '-a' or '-A'
options to repack when '-l' is not used, but there is a flaw. For each
pack in the local repository without a .keep file, repack supplies a
--unpacked=<pack> argument to pack-objects.
The --unpacked option to pack-objects, with or without an argument, causes
pack-objects to ignore any object which is packed in a pack not mentioned
in an argument to --unpacked=. So, if there are local packs, and
'repack -a' is called, then any objects which reside in packs accessible
through alternates will _not_ be packed. If there are no local packs, then
no --unpacked argument will be supplied, and repack will behave as expected.
[1] http://mid.gmane.org/7v8wrwidi3.fsf@gitster.siamese.dyndns.org
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ability to "...fatten [the] local repository by packing everything that
is needed by the local ref into a single new pack, including things that are
borrowed from alternates"[1] is supposed to be provided by the '-a' or '-A'
options to repack when '-l' is not used, but there is a flaw. For each
pack in the local repository without a .keep file, repack supplies a
--unpacked=<pack> argument to pack-objects.
The --unpacked option to pack-objects, with or without an argument, causes
pack-objects to ignore any object which is packed in a pack not mentioned
in an argument to --unpacked=. So, if there are local packs, and
'repack -a' is called, then any objects which reside in packs accessible
through alternates will _not_ be packed. If there are no local packs, then
no --unpacked argument will be supplied, and repack will behave as expected.
[1] http://mid.gmane.org/7v8wrwidi3.fsf@gitster.siamese.dyndns.org
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test more combinations of ignore-whitespace options to diff
There are three flags involved (-w -b and --ignore-space-at-eol) which
makes 8 combinations possible in total, but only 3 cases are tested (none,
-w alone and -b alone).
This adds the other 5 cases.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three flags involved (-w -b and --ignore-space-at-eol) which
makes 8 combinations possible in total, but only 3 cases are tested (none,
-w alone and -b alone).
This adds the other 5 cases.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'ds/uintmax-config'
* ds/uintmax-config:
autoconf: Enable threaded delta search when pthreads are supported
* ds/uintmax-config:
autoconf: Enable threaded delta search when pthreads are supported
Merge branch 'gb/gitweb-opml'
* gb/gitweb-opml:
gitweb: suggest name for OPML view
gitweb: don't use pathinfo for global actions
* gb/gitweb-opml:
gitweb: suggest name for OPML view
gitweb: don't use pathinfo for global actions
Merge branch 'mv/apply-parse-opt'
* mv/apply-parse-opt:
Resurrect "git apply --flags -" to read from the standard input
parse-opt: migrate builtin-apply.
* mv/apply-parse-opt:
Resurrect "git apply --flags -" to read from the standard input
parse-opt: migrate builtin-apply.
Merge branch 'tr/rebase-root'
* tr/rebase-root:
rebase: update documentation for --root
rebase -i: learn to rebase root commit
rebase: learn to rebase root commit
rebase -i: execute hook only after argument checking
* tr/rebase-root:
rebase: update documentation for --root
rebase -i: learn to rebase root commit
rebase: learn to rebase root commit
rebase -i: execute hook only after argument checking
Merge branch 'gb/gitweb-patch'
* gb/gitweb-patch:
gitweb: link to patch(es) view in commit(diff) and (short)log view
gitweb: add patches view
gitweb: change call pattern for git_commitdiff
gitweb: add patch view
Conflicts:
gitweb/gitweb.perl
* gb/gitweb-patch:
gitweb: link to patch(es) view in commit(diff) and (short)log view
gitweb: add patches view
gitweb: change call pattern for git_commitdiff
gitweb: add patch view
Conflicts:
gitweb/gitweb.perl
Merge branch 'ap/clone-into-empty'
* ap/clone-into-empty:
Allow cloning to an existing empty directory
add is_dot_or_dotdot inline function
* ap/clone-into-empty:
Allow cloning to an existing empty directory
add is_dot_or_dotdot inline function
Merge branch 'jc/maint-format-patch'
* jc/maint-format-patch:
format-patch: show patch text for the root commit
* jc/maint-format-patch:
format-patch: show patch text for the root commit
Merge branch 'tr/maint-no-index-fixes'
* tr/maint-no-index-fixes:
diff --no-index -q: fix endless loop
diff --no-index: test for pager after option parsing
diff: accept -- when using --no-index
* tr/maint-no-index-fixes:
diff --no-index -q: fix endless loop
diff --no-index: test for pager after option parsing
diff: accept -- when using --no-index
Merge branch 'as/autocorrect-alias'
* as/autocorrect-alias:
git.c: make autocorrected aliases work
* as/autocorrect-alias:
git.c: make autocorrected aliases work
Merge branch 'rs/fgrep'
* rs/fgrep:
grep: don't call regexec() for fixed strings
grep -w: forward to next possible position after rejected match
* rs/fgrep:
grep: don't call regexec() for fixed strings
grep -w: forward to next possible position after rejected match
Merge branch 'rs/maint-shortlog-foldline'
* rs/maint-shortlog-foldline:
shortlog: handle multi-line subjects like log --pretty=oneline et. al. do
* rs/maint-shortlog-foldline:
shortlog: handle multi-line subjects like log --pretty=oneline et. al. do
Merge branch 'mh/maint-commit-color-status'
* mh/maint-commit-color-status:
git-status -v: color diff output when color.ui is set
git-commit: color status output when color.ui is set
* mh/maint-commit-color-status:
git-status -v: color diff output when color.ui is set
git-commit: color status output when color.ui is set
Merge branch 'maint'
* maint:
Update draft release notes for 1.6.1.1
builtin-fsck: fix off by one head count
t5540: clarify that http-push does not handle packed-refs on the remote
http-push: when making directories, have a trailing slash in the path name
http-push: fix off-by-path_len
Documentation: let asciidoc align related options
githooks.txt: add missing word
builtin-commit.c: do not remove COMMIT_EDITMSG
* maint:
Update draft release notes for 1.6.1.1
builtin-fsck: fix off by one head count
t5540: clarify that http-push does not handle packed-refs on the remote
http-push: when making directories, have a trailing slash in the path name
http-push: fix off-by-path_len
Documentation: let asciidoc align related options
githooks.txt: add missing word
builtin-commit.c: do not remove COMMIT_EDITMSG
Update draft release notes for 1.6.1.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint-1.6.0' into maint
* maint-1.6.0:
builtin-fsck: fix off by one head count
Documentation: let asciidoc align related options
githooks.txt: add missing word
builtin-commit.c: do not remove COMMIT_EDITMSG
* maint-1.6.0:
builtin-fsck: fix off by one head count
Documentation: let asciidoc align related options
githooks.txt: add missing word
builtin-commit.c: do not remove COMMIT_EDITMSG
builtin-fsck: fix off by one head count
According to the man page, if "git fsck" is passed one or more heads, it
should verify connectivity and validity of only objects reachable from the
heads it is passed.
However, since 5ac0a20 (Make builtin-fsck.c use parse_options.,
2007-10-15) the command behaved as if no heads were passed, when given
only one argument.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the man page, if "git fsck" is passed one or more heads, it
should verify connectivity and validity of only objects reachable from the
heads it is passed.
However, since 5ac0a20 (Make builtin-fsck.c use parse_options.,
2007-10-15) the command behaved as if no heads were passed, when given
only one argument.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib: add 'git difftool' for launching common merge tools
'git difftool' is a git command that allows you to compare and edit files
between revisions using common merge tools. 'git difftool' does what
'git mergetool' does but its use is for non-merge situations such as
when preparing commits or comparing changes against the index.
It uses the same configuration variables as 'git mergetool' and
provides the same command-line interface as 'git diff'.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git difftool' is a git command that allows you to compare and edit files
between revisions using common merge tools. 'git difftool' does what
'git mergetool' does but its use is for non-merge situations such as
when preparing commits or comparing changes against the index.
It uses the same configuration variables as 'git mergetool' and
provides the same command-line interface as 'git diff'.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash: refactor 'git log --pretty=<format>' options
Both 'git log' and 'show' have the same '--pretty=<format>' option
with the same formats. So refactor these formats into a common
variable.
While at it, also add 'format:' to the list.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both 'git log' and 'show' have the same '--pretty=<format>' option
with the same formats. So refactor these formats into a common
variable.
While at it, also add 'format:' to the list.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash: add missing format-patch command line options
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash: remove unnecessary checks for long options with argument
__gitcomp takes care of it since 5447aac7 (bash: fix long option with
argument double completion, 2008-03-05)
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__gitcomp takes care of it since 5447aac7 (bash: fix long option with
argument double completion, 2008-03-05)
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5540: clarify that http-push does not handle packed-refs on the remote
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http-push: when making directories, have a trailing slash in the path name
The function lock_remote() sends MKCOL requests to make leading
directories; However, if it does not put a forward slash '/' at the end of
the path, the server sends a 301 redirect.
By leaving the '/' in place, we can avoid this additional step.
Incidentally, at least one version of Curl (7.16.3) does not resend
credentials when it follows a 301 redirect, so this commit also fixes
a bug.
Original patch by Tay Ray Chuan <rctay89@gmail.com>.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function lock_remote() sends MKCOL requests to make leading
directories; However, if it does not put a forward slash '/' at the end of
the path, the server sends a 301 redirect.
By leaving the '/' in place, we can avoid this additional step.
Incidentally, at least one version of Curl (7.16.3) does not resend
credentials when it follows a 301 redirect, so this commit also fixes
a bug.
Original patch by Tay Ray Chuan <rctay89@gmail.com>.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http-push: fix off-by-path_len
When getting the result of remote_ls(), we were advancing the variable
"path" to the relative path inside the repository.
However, then we went on to malloc a bogus amount of memory: we were
subtracting the prefix length _again_, quite possibly getting something
negative, which xmalloc() interprets as really, really much.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When getting the result of remote_ls(), we were advancing the variable
"path" to the relative path inside the repository.
However, then we went on to malloc a bogus amount of memory: we were
subtracting the prefix length _again_, quite possibly getting something
negative, which xmalloc() interprets as really, really much.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: let asciidoc align related options
Fixes the description of the -t option in git-mergetool, which
failed to hint that it takes an argument.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes the description of the -t option in git-mergetool, which
failed to hint that it takes an argument.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: let asciidoc align related options
Command line options can share the same paragraph of description, if
they are related or synonymous. In these cases they should be written
among each other, so that asciidoc can format them itself.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line options can share the same paragraph of description, if
they are related or synonymous. In these cases they should be written
among each other, so that asciidoc can format them itself.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
githooks.txt: add missing word
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-commit.c: do not remove COMMIT_EDITMSG
git-commit tries to remove the file ./COMMIT_EDITMSG instead of
$GIT_DIR/COMMIT_EDITMSG after commit preparation (e.g. running
hooks, launching editor).
This behavior exists since f5bbc3225c4b07 "Port git commit to C".
Some test cases (e.g. t/t7502-commit.sh) rely on the existence of
$GIT_DIR/COMMIT_EDITMSG after committing and, I guess, many people
are used to it. So it is best not to remove it.
This patch just removes the removal of COMMIT_EDITMSG.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-commit tries to remove the file ./COMMIT_EDITMSG instead of
$GIT_DIR/COMMIT_EDITMSG after commit preparation (e.g. running
hooks, launching editor).
This behavior exists since f5bbc3225c4b07 "Port git commit to C".
Some test cases (e.g. t/t7502-commit.sh) rely on the existence of
$GIT_DIR/COMMIT_EDITMSG after committing and, I guess, many people
are used to it. So it is best not to remove it.
This patch just removes the removal of COMMIT_EDITMSG.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
t3404: Add test case for auto-amending only edited commits after "edit"
t3404: Add test case for aborted --continue after "edit"
t3501: check that commits are actually done
* maint:
t3404: Add test case for auto-amending only edited commits after "edit"
t3404: Add test case for aborted --continue after "edit"
t3501: check that commits are actually done
Merge branch 'maint-1.6.0' into maint
* maint-1.6.0:
t3404: Add test case for auto-amending only edited commits after "edit"
t3404: Add test case for aborted --continue after "edit"
t3501: check that commits are actually done
* maint-1.6.0:
t3404: Add test case for auto-amending only edited commits after "edit"
t3404: Add test case for aborted --continue after "edit"
t3501: check that commits are actually done
t3404: Add test case for auto-amending only edited commits after "edit"
Add a test case for the bugfix introduced by commit c14c3c82d
"git-rebase--interactive: auto amend only edited commit".
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test case for the bugfix introduced by commit c14c3c82d
"git-rebase--interactive: auto amend only edited commit".
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3404: Add test case for aborted --continue after "edit"
Add a test case for the bugfix introduced by commit 8beb1f33d
"git-rebase-interactive: do not squash commits on abort".
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test case for the bugfix introduced by commit 8beb1f33d
"git-rebase-interactive: do not squash commits on abort".
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3501: check that commits are actually done
The basic idea of t3501 is to check whether revert
and cherry-pick works on renamed files.
But as there is no pure cherry-pick/revert test, it is
good to also check if commits are actually done in that
scenario.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The basic idea of t3501 is to check whether revert
and cherry-pick works on renamed files.
But as there is no pure cherry-pick/revert test, it is
good to also check if commits are actually done in that
scenario.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash-completion: Add comments to remind about required arguments
Add a few simple comments above commands that take arguments. These
comments are meant to remind developers of potential problems that
can occur when the script is sourced on systems with "set -u." Any
function which requires arguments really ought to be called with
explicit arguments given.
Also adds a #!bash to the top of bash completions so that editing
software can always identify that the file is of sh type.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a few simple comments above commands that take arguments. These
comments are meant to remind developers of potential problems that
can occur when the script is sourced on systems with "set -u." Any
function which requires arguments really ought to be called with
explicit arguments given.
Also adds a #!bash to the top of bash completions so that editing
software can always identify that the file is of sh type.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash-completion: Try bash completions before simple filetype
When a git completion is not found, a bash shell should try bash-type
completions first before going to standard filetype completions. This
patch adds "-o bashdefault" to the completion line. If that option is
not available, it uses the old method.
This behavior was inspired by Mercurial's bash completion script.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a git completion is not found, a bash shell should try bash-type
completions first before going to standard filetype completions. This
patch adds "-o bashdefault" to the completion line. If that option is
not available, it uses the old method.
This behavior was inspired by Mercurial's bash completion script.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash-completion: Support running when set -u is enabled
Under "set -u" semantics, it is an error to access undefined variables.
Some user environments may enable this setting in the interactive shell.
In any context where the completion functions access an undefined
variable, accessing a default empty string (aka "${1-}" instead of "$1")
is a reasonable way to code the function, as it silences the undefined
variable error while still supplying an empty string.
In this patch, functions that should always take an argument still use
$1. Functions that have optional arguments use ${1-}.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Under "set -u" semantics, it is an error to access undefined variables.
Some user environments may enable this setting in the interactive shell.
In any context where the completion functions access an undefined
variable, accessing a default empty string (aka "${1-}" instead of "$1")
is a reasonable way to code the function, as it silences the undefined
variable error while still supplying an empty string.
In this patch, functions that should always take an argument still use
$1. Functions that have optional arguments use ${1-}.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
Update draft release notes to 1.6.1.1
Make t3411 executable
fix handling of multiple untracked files for git mv -k
add test cases for "git mv -k"
* maint:
Update draft release notes to 1.6.1.1
Make t3411 executable
fix handling of multiple untracked files for git mv -k
add test cases for "git mv -k"
Update draft release notes to 1.6.1.1
Merge branch 'maint-1.6.0' into maint
* maint-1.6.0:
fix handling of multiple untracked files for git mv -k
add test cases for "git mv -k"
* maint-1.6.0:
fix handling of multiple untracked files for git mv -k
add test cases for "git mv -k"
Make t3411 executable
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fix handling of multiple untracked files for git mv -k
The "-k" option to "git mv" should allow specifying multiple untracked
files. Currently, multiple untracked files raise an assertion if they
appear consecutively as arguments. Fix this by decrementing the loop
index after removing one entry from the array of arguments.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-k" option to "git mv" should allow specifying multiple untracked
files. Currently, multiple untracked files raise an assertion if they
appear consecutively as arguments. Fix this by decrementing the loop
index after removing one entry from the array of arguments.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
add test cases for "git mv -k"
Add test cases for ignoring nonexisting and untracked files using the -k
option to "git mv". There is one known breakage related to multiple
untracked files specfied as consecutive arguments.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test cases for ignoring nonexisting and untracked files using the -k
option to "git mv". There is one known breakage related to multiple
untracked files specfied as consecutive arguments.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update 1.6.2 draft release notes
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
fast-import: Cleanup mode setting.
Git.pm: call Error::Simple() properly
* maint:
fast-import: Cleanup mode setting.
Git.pm: call Error::Simple() properly
Merge branch 'maint-1.6.0' into maint
* maint-1.6.0:
fast-import: Cleanup mode setting.
Git.pm: call Error::Simple() properly
* maint-1.6.0:
fast-import: Cleanup mode setting.
Git.pm: call Error::Simple() properly
Merge branch 'nd/grep-assume-unchanged'
* nd/grep-assume-unchanged:
grep: grep cache entries if they are "assume unchanged"
grep: support --no-ext-grep to test builtin grep
* nd/grep-assume-unchanged:
grep: grep cache entries if they are "assume unchanged"
grep: support --no-ext-grep to test builtin grep
Merge branch 'as/maint-shortlog-cleanup'
* as/maint-shortlog-cleanup:
builtin-shortlog.c: use string_list_append(), and don't strdup unnecessarily
* as/maint-shortlog-cleanup:
builtin-shortlog.c: use string_list_append(), and don't strdup unnecessarily
Merge branch 'jc/maint-ls-tree'
* jc/maint-ls-tree:
Document git-ls-tree --full-tree
ls-tree: add --full-tree option
* jc/maint-ls-tree:
Document git-ls-tree --full-tree
ls-tree: add --full-tree option
Merge branch 'js/bundle-tags'
* js/bundle-tags:
bundle: allow rev-list options to exclude annotated tags
* js/bundle-tags:
bundle: allow rev-list options to exclude annotated tags
Merge branch 'js/add-not-submodule'
* js/add-not-submodule:
git add: do not add files from a submodule
* js/add-not-submodule:
git add: do not add files from a submodule
Merge branch 'pb/maint-git-pm-false-dir'
* pb/maint-git-pm-false-dir:
Git.pm: correctly handle directory name that evaluates to "false"
* pb/maint-git-pm-false-dir:
Git.pm: correctly handle directory name that evaluates to "false"
Merge branch 'pj/maint-ldflags'
* pj/maint-ldflags:
configure clobbers LDFLAGS
* pj/maint-ldflags:
configure clobbers LDFLAGS
Merge branch 'fe/cvsserver'
* fe/cvsserver:
cvsserver: change generation of CVS author names
cvsserver: add option to configure commit message
* fe/cvsserver:
cvsserver: change generation of CVS author names
cvsserver: add option to configure commit message
Merge branch 'js/maint-bisect-gitk'
* js/maint-bisect-gitk:
bisect view: call gitk if Cygwin's SESSIONNAME variable is set
* js/maint-bisect-gitk:
bisect view: call gitk if Cygwin's SESSIONNAME variable is set
Merge branch 'np/no-loosen-prune-expire-now'
* np/no-loosen-prune-expire-now:
objects to be pruned immediately don't have to be loosened
* np/no-loosen-prune-expire-now:
objects to be pruned immediately don't have to be loosened
Merge branch 'cb/maint-unpack-trees-absense'
* cb/maint-unpack-trees-absense:
unpack-trees: remove redundant path search in verify_absent
unpack-trees: fix path search bug in verify_absent
unpack-trees: handle failure in verify_absent
* cb/maint-unpack-trees-absense:
unpack-trees: remove redundant path search in verify_absent
unpack-trees: fix path search bug in verify_absent
unpack-trees: handle failure in verify_absent
Merge branch 'mc/cd-p-pwd'
* mc/cd-p-pwd:
git-sh-setup: Fix scripts whose PWD is a symlink to a work-dir on OS X
* mc/cd-p-pwd:
git-sh-setup: Fix scripts whose PWD is a symlink to a work-dir on OS X
Merge branch 'mh/cherry-default'
* mh/cherry-default:
Documentation: clarify which parameters are optional to git-cherry
git-cherry: make <upstream> parameter optional
* mh/cherry-default:
Documentation: clarify which parameters are optional to git-cherry
git-cherry: make <upstream> parameter optional
fast-import: Cleanup mode setting.
"S_IFREG | mode" makes only sense for 0644 and 0755.
Even though doing (S_IFREG | mode) may not hurt when mode is any other
supported value, that is only true because S_IFREG mode bit happens to
be already on for S_IFLNK or S_IFGITLINK.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"S_IFREG | mode" makes only sense for 0644 and 0755.
Even though doing (S_IFREG | mode) may not hurt when mode is any other
supported value, that is only true because S_IFREG mode bit happens to
be already on for S_IFLNK or S_IFGITLINK.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git.pm: call Error::Simple() properly
The error message to Error::Simple() must be passed as a single argument.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message to Error::Simple() must be passed as a single argument.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
Avoid spurious error messages on error mistakes.
contrib/examples/README: give an explanation of the status of these files
* maint:
Avoid spurious error messages on error mistakes.
contrib/examples/README: give an explanation of the status of these files
Merge branch 'kk/maint-http-push' into maint
* kk/maint-http-push:
http-push: support full URI in handle_remote_ls_ctx()
* kk/maint-http-push:
http-push: support full URI in handle_remote_ls_ctx()
Merge branch 'js/maint-merge-recursive-r-d-conflict' into maint
* js/maint-merge-recursive-r-d-conflict:
merge-recursive: mark rename/delete conflict as unmerged
* js/maint-merge-recursive-r-d-conflict:
merge-recursive: mark rename/delete conflict as unmerged
Merge branch 'cb/maint-merge-recursive-fix' into maint
* cb/maint-merge-recursive-fix:
merge-recursive: do not clobber untracked working tree garbage
modify/delete conflict resolution overwrites untracked file
Conflicts:
builtin-merge-recursive.c
* cb/maint-merge-recursive-fix:
merge-recursive: do not clobber untracked working tree garbage
modify/delete conflict resolution overwrites untracked file
Conflicts:
builtin-merge-recursive.c
Merge branch 'ap/maint-apply-modefix' into maint
* ap/maint-apply-modefix:
builtin-apply: prevent non-explicit permission changes
* ap/maint-apply-modefix:
builtin-apply: prevent non-explicit permission changes
Merge branch 'maint-1.6.0' into maint
* maint-1.6.0:
Avoid spurious error messages on error mistakes.
contrib/examples/README: give an explanation of the status of these files
* maint-1.6.0:
Avoid spurious error messages on error mistakes.
contrib/examples/README: give an explanation of the status of these files
Avoid spurious error messages on error mistakes.
Prior to that, if the user chose "squash" as a first action, the stderr
looked like:
grep: /home/madcoder/dev/scm/git/.git/rebase-merge/done: No such file or directory
Cannot 'squash' without a previous commit
Now the first line is gone.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to that, if the user chose "squash" as a first action, the stderr
looked like:
grep: /home/madcoder/dev/scm/git/.git/rebase-merge/done: No such file or directory
Cannot 'squash' without a previous commit
Now the first line is gone.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix Documentation typos surrounding the word 'handful'.
Some instances replaced by "handful of", others use
the word "few", a couple get a slight rewording.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some instances replaced by "handful of", others use
the word "few", a couple get a slight rewording.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1_file: make "read_object" static
This function is only used from "sha1_file.c".
And as we want to add a "replace_object" hook in "read_sha1_file",
we must not let people bypass the hook using something other than
"read_sha1_file".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is only used from "sha1_file.c".
And as we want to add a "replace_object" hook in "read_sha1_file",
we must not let people bypass the hook using something other than
"read_sha1_file".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib/vim: change URL to point to the latest syntax files
Vim's SVN repository doesn't offer the latest runtime files, since
normally they are only updated there on a release. Though currently
there is no difference between the SVN and HTTP/FTP version of the git
syntax files.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Vim's SVN repository doesn't offer the latest runtime files, since
normally they are only updated there on a release. Though currently
there is no difference between the SVN and HTTP/FTP version of the git
syntax files.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib/examples/README: give an explanation of the status of these files
We attempt to give an explanation of the status of the files in this
directory.
Signed-off-by: jidanni <jidanni@jidanni.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We attempt to give an explanation of the status of the files in this
directory.
Signed-off-by: jidanni <jidanni@jidanni.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
Documentation/git-push.txt: minor: compress one option
* maint:
Documentation/git-push.txt: minor: compress one option
Merge branch 'mh/maint-sendmail-cc-doc' into maint
* mh/maint-sendmail-cc-doc:
doc/git-send-email: mention sendemail.cc config variable
* mh/maint-sendmail-cc-doc:
doc/git-send-email: mention sendemail.cc config variable
Merge branch 'jc/maint-do-not-switch-to-non-commit' into maint
* jc/maint-do-not-switch-to-non-commit:
git checkout: do not allow switching to a tree-ish that is not a commit
* jc/maint-do-not-switch-to-non-commit:
git checkout: do not allow switching to a tree-ish that is not a commit
rebase: update documentation for --root
Since the new option depends on --onto and omission of <upstream>, use
a separate invocation style, and omit most options to save space.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the new option depends on --onto and omission of <upstream>, use
a separate invocation style, and omit most options to save space.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase -i: learn to rebase root commit
Teach git-rebase -i a new option --root, which instructs it to rebase
the entire history leading up to <branch>. This is mainly for
symmetry with ordinary git-rebase; it cannot be used to edit the root
commit in-place (it requires --onto <newbase>). Commits that already
exist in <newbase> are skipped.
In the normal mode of operation, this is fairly straightforward. We
run cherry-pick in a loop, and cherry-pick has supported picking the
root commit since f95ebf7 (Allow cherry-picking root commits,
2008-07-04).
In --preserve-merges mode, we track the mapping from old to rewritten
commits and use it to update the parent list of each commit. In this
case, we define 'rebase -i -p --root --onto $onto $branch' to rewrite
the parent list of all root commit(s) on $branch to contain $onto
instead.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-rebase -i a new option --root, which instructs it to rebase
the entire history leading up to <branch>. This is mainly for
symmetry with ordinary git-rebase; it cannot be used to edit the root
commit in-place (it requires --onto <newbase>). Commits that already
exist in <newbase> are skipped.
In the normal mode of operation, this is fairly straightforward. We
run cherry-pick in a loop, and cherry-pick has supported picking the
root commit since f95ebf7 (Allow cherry-picking root commits,
2008-07-04).
In --preserve-merges mode, we track the mapping from old to rewritten
commits and use it to update the parent list of each commit. In this
case, we define 'rebase -i -p --root --onto $onto $branch' to rewrite
the parent list of all root commit(s) on $branch to contain $onto
instead.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase: learn to rebase root commit
Teach git-rebase a new option --root, which instructs it to rebase the
entire history leading up to <branch>. This option must be used with
--onto <newbase>, and causes commits that already exist in <newbase>
to be skipped. (Normal operation skips commits that already exist in
<upstream> instead.)
One possible use-case is with git-svn: suppose you start hacking
(perhaps offline) on a new project, but later notice you want to
commit this work to SVN. You will have to rebase the entire history,
including the root commit, on a (possibly empty) commit coming from
git-svn, to establish a history connection. This previously had to
be done by cherry-picking the root commit manually.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-rebase a new option --root, which instructs it to rebase the
entire history leading up to <branch>. This option must be used with
--onto <newbase>, and causes commits that already exist in <newbase>
to be skipped. (Normal operation skips commits that already exist in
<upstream> instead.)
One possible use-case is with git-svn: suppose you start hacking
(perhaps offline) on a new project, but later notice you want to
commit this work to SVN. You will have to rebase the entire history,
including the root commit, on a (possibly empty) commit coming from
git-svn, to establish a history connection. This previously had to
be done by cherry-picking the root commit manually.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/git-push.txt: minor: compress one option
Signed-off-by: jidanni <jidanni@jidanni.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: jidanni <jidanni@jidanni.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>