Code

git.git
13 years agoi18n: git-shortlog basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:32 +0000 (23:42 +0000)]
i18n: git-shortlog basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-revert split up "could not revert/apply" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:31 +0000 (23:42 +0000)]
i18n: git-revert split up "could not revert/apply" message

Split up the "could not %s %s... %s" message into "could not revert
%s... %s" and "could not apply %s... %s". This makes it easier for
translators to understand the message.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-revert literal "me" messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:30 +0000 (23:42 +0000)]
i18n: git-revert literal "me" messages

Translate messages that use the `me' variable. These are all error
messages referencing the command name, so the name shouldn't be
translated.

Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-revert "Your local changes" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:29 +0000 (23:42 +0000)]
i18n: git-revert "Your local changes" message

Translate the "Your local changes [...]" message without using the
`me' variable, instead split up the two messages so translators can
translate the whole messages as-is.

Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-revert basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:28 +0000 (23:42 +0000)]
i18n: git-revert basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-notes GIT_NOTES_REWRITE_MODE error message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:27 +0000 (23:42 +0000)]
i18n: git-notes GIT_NOTES_REWRITE_MODE error message

Use sprintf format for the error message that's displayed if
GIT_NOTES_REWRITE_MODE is invalid, and leave a note in a TRANSLATORS
comment indicating what the message means.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-notes basic commands
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:26 +0000 (23:42 +0000)]
i18n: git-notes basic commands

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-gc "Auto packing the repository" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:25 +0000 (23:42 +0000)]
i18n: git-gc "Auto packing the repository" message

Split up the "Auto packing the repository" message into quiet and
verbose variants to make translation easier.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-gc basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:24 +0000 (23:42 +0000)]
i18n: git-gc basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-describe basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:23 +0000 (23:42 +0000)]
i18n: git-describe basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-clean clean.requireForce messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:22 +0000 (23:42 +0000)]
i18n: git-clean clean.requireForce messages

Split up the "clean.requireForce set/defaults to true..." die()
message to make it easier to translate.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-clean basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:21 +0000 (23:42 +0000)]
i18n: git-clean basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-bundle basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:20 +0000 (23:42 +0000)]
i18n: git-bundle basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-archive basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:19 +0000 (23:42 +0000)]
i18n: git-archive basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-status "renamed: " message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:18 +0000 (23:42 +0000)]
i18n: git-status "renamed: " message

Gettextize the "renamed: %s -> %s" message which appears as part of
git-status(1) output. Two tests in t4001-diff-rename.sh explicitly
checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-status "Initial commit" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:17 +0000 (23:42 +0000)]
i18n: git-status "Initial commit" message

Gettextize the "# Initial commit" message. A test in t7501-commit.sh
explicitly checked for this message. Change it to skip under
GETTEXT_POISON=YesPlease.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-status "Changes to be committed" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:16 +0000 (23:42 +0000)]
i18n: git-status "Changes to be committed" message

Gettextize the "# Changes to be committed:" messages. Several tests
explicitly checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.

Since these tests didn't check for the rest of the git-status(1)
output this change has been split up from the "git-status basic
messages" patch.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-status shortstatus messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:15 +0000 (23:42 +0000)]
i18n: git-status shortstatus messages

Make the messages added in v1.7.2-rc0~54^2~1 translatable. Some of
these could use the to be implemented plural support in the gettext
library.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-status "nothing to commit" messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:14 +0000 (23:42 +0000)]
i18n: git-status "nothing to commit" messages

Gettextize the "nothing to commit" messages. Many tests explicitly
checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-status basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:13 +0000 (23:42 +0000)]
i18n: git-status basic messages

Gettextize the most common git-status messages. Many tests checked for
these explicitly. Change them to skip under GETTEXT_POISON=YesPlease.

Some of the tests in t7508-status.sh needed to be split up when I
added C_LOCALE_OUTPUT to them, since parts of them affected later
tests (some of which aren't being skipped) indirectly.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-push "prevent you from losing" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:12 +0000 (23:42 +0000)]
i18n: git-push "prevent you from losing" message

Gettextize the "To prevent you from losing history" message. A test in
lib-httpd.sh and another in t5541-http-push.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-push basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:11 +0000 (23:42 +0000)]
i18n: git-push basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-tag tag_template message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:10 +0000 (23:42 +0000)]
i18n: git-tag tag_template message

Mark the tag_template message as translatable with N_() and then use
it later with _(). We need to skip a test under GETTEXT_POISON that
relies on the output having a leading newline.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-tag basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:09 +0000 (23:42 +0000)]
i18n: git-tag basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-reset "Unstaged changes after reset" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:08 +0000 (23:42 +0000)]
i18n: git-reset "Unstaged changes after reset" message

Gettextize the ""Unstaged changes after reset:" message. A test in
t7102-reset.sh explicitly checked for this message. Change it to skip
under GETTEXT_POISON=YesPlease.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-reset reset_type_names messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:07 +0000 (23:42 +0000)]
i18n: git-reset reset_type_names messages

Make the messages in git-reset that use the reset_type_names static
array to be translatable by marking the array items with N_() and
using _() later.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-reset basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:06 +0000 (23:42 +0000)]
i18n: git-reset basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-rm basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:05 +0000 (23:42 +0000)]
i18n: git-rm basic messages

Make the basic git-mv messages translatable, but skip things like "rm
'%s'\n" and "git rm '%s'\n" for now.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-mv "bad" messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:04 +0000 (23:42 +0000)]
i18n: git-mv "bad" messages

Gettextize messages made by assigning to the "bad" char* variable.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-mv basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:03 +0000 (23:42 +0000)]
i18n: git-mv basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-merge "Wonderful" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:02 +0000 (23:42 +0000)]
i18n: git-merge "Wonderful" message

Gettextize the "Wonderful" message. A test in t7600-merge.sh
explicitly checked for this message. Change it to skip under
GETTEXT_POISON=YesPlease.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-merge "You have not concluded your merge" messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:01 +0000 (23:42 +0000)]
i18n: git-merge "You have not concluded your merge" messages

Gettextize the "You have not concluded your merge messages. A test in
t3030-merge-recursive.sh explicitly checked for this message. Change
it to skip the test under GETTEXT_POISON=YesPlease.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-merge "Updating %s..%s" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:42:00 +0000 (23:42 +0000)]
i18n: git-merge "Updating %s..%s" message

Gettextize the "Updating %s..%s\n" message. A test in
t1200-tutorial.sh explicitly checked for this message. Split it into
two tests to skip the test_cmp test under GETTEXT_POISON=YesPlease.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-merge basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:59 +0000 (23:41 +0000)]
i18n: git-merge basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-log "--OPT does not make sense" messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:58 +0000 (23:41 +0000)]
i18n: git-log "--OPT does not make sense" messages

Gettextize the "--name-only/--name-status/--check does not make sense"
messages. A test in t4014-format-patch.sh explicitly checked for these
messages. Change them to skip under GETTEXT_POISON=YesPlease.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-log basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:57 +0000 (23:41 +0000)]
i18n: git-log basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-grep "--open-files-in-pager" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:56 +0000 (23:41 +0000)]
i18n: git-grep "--open-files-in-pager" message

Gettextize the "--open-files-in-pager only works on the worktree"
message. A test in t7811-grep-open.sh explicitly checked for this
message. Change it to skip under GETTEXT_POISON=YesPlease.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-grep basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:55 +0000 (23:41 +0000)]
i18n: git-grep basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-fetch split up "(non-fast-forward)" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:54 +0000 (23:41 +0000)]
i18n: git-fetch split up "(non-fast-forward)" message

Split up the "(non-fast-forward)" message from printf directives and
make it translatable.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-fetch update_local_ref messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:53 +0000 (23:41 +0000)]
i18n: git-fetch update_local_ref messages

Translate a "[rejected]" message spotted by Jeff King, and other
things in update_local_ref along with it.

Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-fetch formatting messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:52 +0000 (23:41 +0000)]
i18n: git-fetch formatting messages

Translate some of the formatting messages that appear on git-fetch
showing how branches/tags etc. were updated.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-fetch basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:51 +0000 (23:41 +0000)]
i18n: git-fetch basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-diff basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:50 +0000 (23:41 +0000)]
i18n: git-diff basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-commit advice messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:49 +0000 (23:41 +0000)]
i18n: git-commit advice messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-commit "enter the commit message" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:48 +0000 (23:41 +0000)]
i18n: git-commit "enter the commit message" message

Gettextize the "# Please enter the commit message for your changes."
message. Several tests in t7500-commit.sh and t7502-commit.sh assume
that this message starts with a newline. Change the tests to to skip
under GETTEXT_POISON=YesPlease.

These fail under GETTEXT_POISON=YesPlease because the poison editor
message doesn't do the right thing with comments and line breaks, so
these messages will be incorrectly broken up across lines.

This test should not be skipped under a hypothetical future testing
mode that tests Git under language locales, since those messages
should all start with a newline like the original.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-commit print_summary messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:47 +0000 (23:41 +0000)]
i18n: git-commit print_summary messages

Gettextize the "(root-commit)" and "detached HEAD" fragments that
appear when you commit either the root commit, or a commit in a
detached head translatable.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-commit formatting messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:46 +0000 (23:41 +0000)]
i18n: git-commit formatting messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-commit "middle of a merge" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:45 +0000 (23:41 +0000)]
i18n: git-commit "middle of a merge" message

Gettextize the "You are in the middle of a merge -- cannot amend."
message. Several tests in t7110-reset-merge.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-commit basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:44 +0000 (23:41 +0000)]
i18n: git-commit basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-checkout "Switched to a .. branch" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:43 +0000 (23:41 +0000)]
i18n: git-checkout "Switched to a .. branch" message

Split up the "Switched to and reset branch" and "Switched to a new
branch" messages to make them easier to translate.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-checkout "HEAD is now at" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:42 +0000 (23:41 +0000)]
i18n: git-checkout "HEAD is now at" message

Gettextize the "HEAD is now at" messages. Several tests in t7201-co.sh
explicitly checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-checkout describe_detached_head messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:41 +0000 (23:41 +0000)]
i18n: git-checkout describe_detached_head messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-checkout: our/their version message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:40 +0000 (23:41 +0000)]
i18n: git-checkout: our/their version message

Split up the "does not have our/their version" message to make it
easier to translate.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-checkout basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:39 +0000 (23:41 +0000)]
i18n: git-checkout basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-branch "(no branch)" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:38 +0000 (23:41 +0000)]
i18n: git-branch "(no branch)" message

Gettextize the "(no branch)" message that's shown by "git branch" when
you're in a detached HEAD.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-branch "git branch -v" messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:37 +0000 (23:41 +0000)]
i18n: git-branch "git branch -v" messages

Make the "git branch -v" messages translatable, e.g.:

    5054b57 [ahead 8] branch error fixup

This is possibly a plumbing message.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-branch "Deleted branch [...]" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:36 +0000 (23:41 +0000)]
i18n: git-branch "Deleted branch [...]" message

Gettextize the "Deleted %sbranch %s (was %s).\n" messages. test in
t3200-branch.sh explicitly checked for this message. Change it to skip
under GETTEXT_POISON=YesPlease.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-branch "remote branch '%s' not found" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:35 +0000 (23:41 +0000)]
i18n: git-branch "remote branch '%s' not found" message

This could be done better by splitting it up, but it would change too
much code, which I'm trying to avoid at this point. Instead add a
TRANSLATORS comment to explain what "remote " does.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-branch basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:34 +0000 (23:41 +0000)]
i18n: git-branch basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-add "Unstaged changes" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:33 +0000 (23:41 +0000)]
i18n: git-add "Unstaged changes" message

Make the "Unstaged changes after refreshing the index:"
translatable. It's displayed under `git add --refresh --verbose`.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-add "remove '%s'" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:32 +0000 (23:41 +0000)]
i18n: git-add "remove '%s'" message

Make the "remove '%s'" message translatable. It's displayed under `git
add -u --verbose`. Also skip the corresponding test when output is not
in the C locale.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-add "did not match any files" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:31 +0000 (23:41 +0000)]
i18n: git-add "did not match any files" message

Make the "did not match any files" message translatable, and skip the
test that checks for it when the C_LOCALE_OUTPUT prereq is not
present.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-add "The following paths are ignored" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:30 +0000 (23:41 +0000)]
i18n: git-add "The following paths are ignored" message

The tests t2204 (.gitignore) and t3700 (add) explicitly check for
these messages, so while at it, split each relevant test into a part
that just checks "git add"'s exit status and a part that checks
porcelain output.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-add basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:29 +0000 (23:41 +0000)]
i18n: git-add basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-clone "Cloning into" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:28 +0000 (23:41 +0000)]
i18n: git-clone "Cloning into" message

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-clone "Cloning into" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:27 +0000 (23:41 +0000)]
i18n: git-clone "Cloning into" message

Separate the "Cloning into %s" and "Cloning into bare repository %s"
messages to make them easier to translate. No noticeable change
intended.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-clone basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:26 +0000 (23:41 +0000)]
i18n: git-clone basic messages

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-init "Initialized [...] repository" message
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:25 +0000 (23:41 +0000)]
i18n: git-init "Initialized [...] repository" message

These messages could benefit from splitting up.  An earlier version of
this patch began like this:

    const char *reinit_shared   = _("Reinitialized existing shared Git repository in %s\n");
    const char *init_shared     = _("Initialized empty shared Git repository in %s\n");
    const char *reinit_noshared = _("Reinitialized existing Git repository in %s\n");
    const char *init_noshared   = _("Initialized empty Git repository in %s\n");

But in the first round of gettextization I'm aiming to keep code
changes to a minimum for ease of review.  So just add a comment
explaining to translators how the sprintf format gets used so they
can cope for now if the language's grammar allows.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: git-init basic messages
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:24 +0000 (23:41 +0000)]
i18n: git-init basic messages

Change the user visible strings in init-db.c to use gettext
localizations. This only converts messages which needed to be changed
from "foo" to _("foo"), and didn't need any TRANSLATORS comments.

I haven't marked the messages in init_db_usage or init_db_options for
translation, since that would require additional changes in
parse-options.c. Those can be done later.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: "make distclean" should clean up after "make pot"
Jonathan Nieder [Fri, 25 Feb 2011 07:22:12 +0000 (01:22 -0600)]
i18n: "make distclean" should clean up after "make pot"

This is in "make distclean" and not "make clean" to avoid needlessly
changing the POT-Creation-Date in the following scenario:

make clean; # cleaning up after an old build
git pull
make pot; # regenerate po template if necessary
msgmerge po/my_language.po po/git.pot

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: Makefile: "pot" target to extract messages marked for translation
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:23 +0000 (23:41 +0000)]
i18n: Makefile: "pot" target to extract messages marked for translation

Add rules to generate a template (po/git.pot) listing messages marked
for translation in the C portion of git.

To get started translating, just run "make pot".

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: add stub Q_() wrapper for ngettext
Jonathan Nieder [Thu, 10 Mar 2011 03:17:58 +0000 (21:17 -0600)]
i18n: add stub Q_() wrapper for ngettext

The Q_ function translates a string representing some pharse with an
alternative plural form and uses the 'count' argument to choose which
form to return.  Use of Q_ solves the "%d noun(s)" problem in a way
that is portable to languages outside the Germanic and Romance
families.

In English, the semantics of Q_(sing, plur, count) are roughly
equivalent to

count == 1 ? _(sing) : _(plur)

while in other languages there can be more variants (count == 0; more
random-looking rules based on the historical pronunciation of the
number).  Behind the scenes, the singular form is used to look up a
family of translations and the plural form is ignored unless no
translation is available.

Define such a Q_ in gettext.h with the English semantics so C code can
start using it to mark phrases with a count for translation.

The name "Q_" is taken from subversion and stands for "quantity".
Many projects just use ngettext directly without a wrapper analogous
to _; we should not do so because git's gettext.h is meant not to
conflict with system headers that might include libintl.h.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: do not poison translations unless GIT_GETTEXT_POISON envvar is set
Jonathan Nieder [Tue, 22 Feb 2011 23:41:22 +0000 (23:41 +0000)]
i18n: do not poison translations unless GIT_GETTEXT_POISON envvar is set

Tweak the GETTEXT_POISON facility so it is activated at run time
instead of compile time.  If the GIT_GETTEXT_POISON environment
variable is set, _(msg) will result in gibberish as before; but if the
GIT_GETTEXT_POISON variable is not set, it will return the message for
human-readable output.  So the behavior of mistranslated and
untranslated git can be compared without rebuilding git in between.

For simplicity we always set the GIT_GETTEXT_POISON variable in tests.

This does not affect builds without the GETTEXT_POISON compile-time
option set, so non-i18n git will not be slowed down.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: add GETTEXT_POISON to simulate unfriendly translator
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:21 +0000 (23:41 +0000)]
i18n: add GETTEXT_POISON to simulate unfriendly translator

Add a new GETTEXT_POISON compile-time parameter to make _(msg) always
return gibberish. So now you can run

make GETTEXT_POISON=YesPlease

to get a copy of git that functions correctly (one hopes) but produces
output that is in nobody's native language at all.

This is a debugging aid for people who are working on the i18n part of
the system, to make sure that they are not marking plumbing messages
that should never be translated with _().

As new strings get marked for translation, naturally a number of tests
will be broken in this mode. Tests that depend on output from
Porcelain will need to be marked with the new C_LOCALE_OUTPUT test
prerequisite. Newly failing tests that do not depend on output from
Porcelain would be bugs due to messages that should not have been
marked for translation.

Note that the string we're using ("# GETTEXT POISON #") intentionally
starts the pound sign. Some of Git's tests such as
t3404-rebase-interactive.sh rely on interactive editing with a fake
editor, and will needlessly break if the message doesn't start with
something the interactive editor considers a comment.

A future patch will fix fix the underlying cause of that issue by
adding "#" characters to the commit advice automatically.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: add no-op _() and N_() wrappers
Ævar Arnfjörð Bjarmason [Tue, 22 Feb 2011 23:41:20 +0000 (23:41 +0000)]
i18n: add no-op _() and N_() wrappers

The _ function is for translating strings into the user's chosen
language.  The N_ macro just marks translatable strings for the
xgettext(1) tool without translating them; it is intended for use in
contexts where a function call cannot be used.  So, for example:

fprintf(stderr, _("Expansion of alias '%s' failed; "
"'%s' is not a git command\n"),
cmd, argv[0]);

and

const char *unpack_plumbing_errors[NB_UNPACK_TREES_ERROR_TYPES] = {
/* ERROR_WOULD_OVERWRITE */
N_("Entry '%s' would be overwritten by merge. Cannot merge."),
[...]

Define such _ and N_ in a new gettext.h and include it in cache.h, so
they can be used everywhere.  Each just returns its argument for now.
_ is a function rather than a macro like N_ to avoid the temptation to
use _("foo") as a string literal (which would be a compile-time error
once _(s) expands to an expression for the translation of s).

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agocommit, status: use status_printf{,_ln,_more} helpers
Jonathan Nieder [Sat, 26 Feb 2011 05:11:37 +0000 (23:11 -0600)]
commit, status: use status_printf{,_ln,_more} helpers

wt-status code is used to provide a reminder of changes included and
not included for the commit message template opened in the operator's
text editor by "git commit".  Therefore each line of its output begins
with the comment character "#":

# Please enter the commit message for your changes. Lines starting

Use the new status_printf{,_ln,_more} functions to take care of adding
"#" to the beginning of such status lines automatically.  Using these
will have two advantages over the current code:

 - The obvious one is to force separation of the "#" from the
   translatable part of the message when git learns to translate its
   output.

 - Another advantage is that this makes it easier for us to drop "#"
   prefix in "git status" output in later versions of git if we want
   to.

Explained-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agocommit: refer to commit template as s->fp
Jonathan Nieder [Sat, 26 Feb 2011 05:10:49 +0000 (23:10 -0600)]
commit: refer to commit template as s->fp

Instead of maintaining a local variable for it, use s->fp to keep
track of where the commit message template should be written.

This prepares us to take advantage of the status_printf functions,
which use a struct wt_status instead of a FILE pointer to determine
where to send their output.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agowt-status: add helpers for printing wt-status lines
Jonathan Nieder [Sat, 26 Feb 2011 05:09:41 +0000 (23:09 -0600)]
wt-status: add helpers for printing wt-status lines

Introduce status_printf{,_ln,_more} wrapper functions around
color_vfprintf() which take care of adding "#" to the beginning of
status lines automatically.  The semantics:

 - status_printf() is just like color_fprintf() but it adds a "# "
   at the beginning of each line of output;

 - status_printf_ln() is a convenience function that additionally
   adds "\n" at the end;

 - status_printf_more() is a variant of status_printf() used to
   continue lines that have already started.  It suppresses the "#" at
   the beginning of the first line.

Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agocompat: fall back on __va_copy if available
Jonathan Nieder [Tue, 8 Mar 2011 08:33:44 +0000 (02:33 -0600)]
compat: fall back on __va_copy if available

Since an obvious implementation of va_list is to make it a pointer
into the stack frame, implementing va_copy as "dst = src" will work on
many systems.  Platforms that use something different (e.g., a size-1
array of structs, to be assigned with *(dst) = *(src)) will need some
other compatibility macro, though.

Luckily, as the glibc manual hints, such systems tend to provide the
__va_copy macro (introduced in GCC in March, 1997).  By using that if
it is available, we can cover our bases pretty well.

Discovered by building with CC="gcc -std=c89" on an amd64 machine:

 $ make CC=c89 strbuf.o
 [...]
 strbuf.c: In function 'strbuf_vaddf':
 strbuf.c:211:2: error: incompatible types when assigning to type 'va_list'
  from type 'struct __va_list_tag *'
 make: *** [strbuf.o] Error 1

Explained-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agostrbuf: add strbuf_vaddf
Jeff King [Sat, 26 Feb 2011 05:08:53 +0000 (23:08 -0600)]
strbuf: add strbuf_vaddf

In a variable-args function, the code for writing into a strbuf is
non-trivial. We ended up cutting and pasting it in several places
because there was no vprintf-style function for strbufs (which in turn
was held up by a lack of va_copy).

Now that we have a fallback va_copy, we can add strbuf_vaddf, the
strbuf equivalent of vsprintf. And we can clean up the cut and paste
mess.

Signed-off-by: Jeff King <peff@peff.net>
Improved-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agocompat: provide a fallback va_copy definition
Jeff King [Sat, 26 Feb 2011 05:08:25 +0000 (23:08 -0600)]
compat: provide a fallback va_copy definition

va_copy is C99.  We have avoided using va_copy many times in the past,
which has led to a bunch of cut-and-paste.  From everything I found
searching the web, implementations have historically either provided
va_copy or just let your code assume that simple assignment of worked.

So my guess is that this will be sufficient, though we won't really
know for sure until somebody reports a problem.

Signed-off-by: Jeff King <peff@peff.net>
Improved-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoupdate-index --refresh --porcelain: add missing const
Jonathan Nieder [Tue, 22 Feb 2011 22:43:23 +0000 (22:43 +0000)]
update-index --refresh --porcelain: add missing const

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agocheckout: add missing const to describe_detached_head
Jonathan Nieder [Tue, 22 Feb 2011 22:43:22 +0000 (22:43 +0000)]
checkout: add missing const to describe_detached_head

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'maint'
Junio C Hamano [Tue, 22 Feb 2011 06:46:09 +0000 (22:46 -0800)]
Merge branch 'maint'

* maint:
  Documentation: clarify -u<mode> option defaults

13 years agoDocumentation: clarify -u<mode> option defaults
Clemens Buchacher [Mon, 21 Feb 2011 20:05:25 +0000 (21:05 +0100)]
Documentation: clarify -u<mode> option defaults

Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'maint'
Junio C Hamano [Tue, 22 Feb 2011 01:20:11 +0000 (17:20 -0800)]
Merge branch 'maint'

* maint:
  t/t7500-commit.sh: use test_cmp instead of test
  t/gitweb-lib.sh: Ensure that errors are shown for --debug --immediate
  gitweb/gitweb.perl: don't call S_ISREG() with undef
  gitweb/gitweb.perl: remove use of qw(...) as parentheses

13 years agot/t7500-commit.sh: use test_cmp instead of test
Ævar Arnfjörð Bjarmason [Sat, 19 Feb 2011 18:29:09 +0000 (18:29 +0000)]
t/t7500-commit.sh: use test_cmp instead of test

Change commit_msg_is() in t/t7500-commit.sh to use test_cmp instead of
the shell's test function. Now if a test fails we'll get test_cmp
output showing us what failed.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agot/gitweb-lib.sh: Ensure that errors are shown for --debug --immediate
Ævar Arnfjörð Bjarmason [Sat, 19 Feb 2011 18:16:19 +0000 (19:16 +0100)]
t/gitweb-lib.sh: Ensure that errors are shown for --debug --immediate

Because '--immediate' stops test suite after first error, therefore in
this mode

  test_debug 'cat gitweb.log'

was never ran, thus in effect negating effect of '--debug' option.
This made finidng the cause of errors in gitweb test sute difficult.

Modify the gitweb_run test subroutine to run test_debug itself in the
case of errors (and also remove "test_debug 'cat gitweb.log'" from
gitweb tests).

This makes it possible to run *gitweb tests* with --immediate ---debug
combination of options; also it makes gitweb tests to not output
spurious debug data that is not considered error.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agogitweb/gitweb.perl: don't call S_ISREG() with undef
Ævar Arnfjörð Bjarmason [Sat, 19 Feb 2011 15:27:42 +0000 (15:27 +0000)]
gitweb/gitweb.perl: don't call S_ISREG() with undef

Change S_ISREG($to_mode_oct) to S_ISREG($from_mode_oct) in the branch
that handles from modes, not to modes. This logic appears to have been
caused by copy/paste programming by Jakub Narebski in e8e41a93. It
would be better to rewrite this code not to be duplicated, but I
haven't done so.

This issue caused a failing test on perl 5.13.9, which has a warning
that turned this up:

     gitweb.perl: Use of uninitialized value in subroutine entry at /home/avar/g/git/t/../gitweb/gitweb.perl line 4415.

Which caused the Git test suite to fail on this test:

    ./t9500-gitweb-standalone-no-errors.sh             (Wstat: 256 Tests: 90 Failed: 84)
      Failed tests:  1-8, 10-36, 38-45, 47-48, 50-88
      Non-zero exit status: 1

Reported-by: perl 5.13.9
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agogitweb/gitweb.perl: remove use of qw(...) as parentheses
Ævar Arnfjörð Bjarmason [Sat, 19 Feb 2011 15:27:41 +0000 (15:27 +0000)]
gitweb/gitweb.perl: remove use of qw(...) as parentheses

Using the qw(...) construct as implicit parentheses was deprecated in
perl 5.13.5. Change the relevant code in gitweb to not use the
deprecated construct. The offending code was introduced in 3562198b by
Jakub Narebski.

The issue is that perl will now warn about this:

    $ perl -wE 'for my $i qw(a b) { say $i }'
    Use of qw(...) as parentheses is deprecated at -e line 1.
    a
    b

This caused gitweb.perl to warn on perl 5.13.5 and above, and these
tests to fail on those perl versions:

    ./t9501-gitweb-standalone-http-status.sh           (Wstat: 256 Tests: 11 Failed: 10)
      Failed tests:  2-11
      Non-zero exit status: 1
    ./t9502-gitweb-standalone-parse-output.sh          (Wstat: 256 Tests: 10 Failed: 9)
      Failed tests:  2-10
      Non-zero exit status: 1

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'maint'
Junio C Hamano [Wed, 16 Feb 2011 22:33:22 +0000 (14:33 -0800)]
Merge branch 'maint'

* maint:
  parse_tag_buffer(): do not prefixcmp() out of range

13 years agoMerge branch 'maint-1.7.3' into maint
Junio C Hamano [Wed, 16 Feb 2011 22:33:11 +0000 (14:33 -0800)]
Merge branch 'maint-1.7.3' into maint

* maint-1.7.3:

13 years agoMerge branch 'maint-1.7.2' into maint-1.7.3
Junio C Hamano [Wed, 16 Feb 2011 22:32:59 +0000 (14:32 -0800)]
Merge branch 'maint-1.7.2' into maint-1.7.3

* maint-1.7.2:
  fast-import: introduce "feature notes" command
  fast-import: clarify documentation of "feature" command

13 years agoMerge branch 'maint-1.7.1' into maint-1.7.2
Junio C Hamano [Wed, 16 Feb 2011 22:32:54 +0000 (14:32 -0800)]
Merge branch 'maint-1.7.1' into maint-1.7.2

* maint-1.7.1:
  fast-import: introduce "feature notes" command
  fast-import: clarify documentation of "feature" command

13 years agoMerge branch 'maint-1.7.0' into maint-1.7.1
Junio C Hamano [Wed, 16 Feb 2011 22:32:47 +0000 (14:32 -0800)]
Merge branch 'maint-1.7.0' into maint-1.7.1

* maint-1.7.0:
  fast-import: introduce "feature notes" command
  fast-import: clarify documentation of "feature" command

13 years agoparse_tag_buffer(): do not prefixcmp() out of range
Nguyễn Thái Ngọc Duy [Mon, 14 Feb 2011 13:02:51 +0000 (20:02 +0700)]
parse_tag_buffer(): do not prefixcmp() out of range

There is a check (size < 64) at the beginning of the function, but
that only covers object+type lines.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'maint'
Junio C Hamano [Tue, 15 Feb 2011 19:03:22 +0000 (11:03 -0800)]
Merge branch 'maint'

* maint:
  pull: do not display fetch usage on --help-all
  git-tag.txt: list all modes in the description
  commit,status: describe -u likewise
  add: describe --patch like checkout, reset
  commit,merge,tag: describe -m likewise
  clone,init: describe --template using the same wording
  commit,status: describe --porcelain just like push
  commit,tag: use same wording for -F
  configure: use AC_LANG_PROGRAM consistently
  string_list_append: always set util pointer to NULL
  correct type of EMPTY_TREE_SHA1_BIN

13 years agopull: do not display fetch usage on --help-all
Michael J Gruber [Mon, 14 Feb 2011 16:48:08 +0000 (17:48 +0100)]
pull: do not display fetch usage on --help-all

Currently, "git pull --help-all" displays the fetch usage info.

Make it equivalent to "git pull -h" instead since "--help-all" is
documented in gitcli(7).

Do not try to sanitize the pull option parser (aka last hair puller).

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agogit-tag.txt: list all modes in the description
Michael J Gruber [Tue, 15 Feb 2011 13:09:10 +0000 (14:09 +0100)]
git-tag.txt: list all modes in the description

Currently, the description sounds as if it applied always, but most of
its content is true in "create tag mode" only.

Make this clearer by listing all modes upfront.

Also, sneak in some linguistic improvements and make it clearer that
lightweight tags are "created" because "written" may be misread as
"are output".

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agocommit,status: describe -u likewise
Michael J Gruber [Tue, 15 Feb 2011 13:09:09 +0000 (14:09 +0100)]
commit,status: describe -u likewise

They differ by one character only. Being exactly equal should help
translations.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>