send-email: try to order messages in email clients more correctly
If --no-chain-reply-to is set, patches may not always be ordered
correctly in email clients. This patch makes sure each email
sent from a different second.
I chose to start with a time (slightly) in the past because
those are probably more likely in real-world usage and spam
filters might be more tolerant of them.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If --no-chain-reply-to is set, patches may not always be ordered
correctly in email clients. This patch makes sure each email
sent from a different second.
I chose to start with a time (slightly) in the past because
those are probably more likely in real-world usage and spam
filters might be more tolerant of them.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
send-email: Change from Mail::Sendmail to Net::SMTP
Net::SMTP is in the base Perl distribution, so users are more
likely to have it. Net::SMTP also allows reusing the SMTP
connection, so sending multiple emails is faster.
[jc: tweaked X-Mailer further while we are at it.]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Net::SMTP is in the base Perl distribution, so users are more
likely to have it. Net::SMTP also allows reusing the SMTP
connection, so sending multiple emails is faster.
[jc: tweaked X-Mailer further while we are at it.]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
send-email: use built-in time() instead of /bin/date '+%s'
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-apply: safety fixes
This was triggered by me testing the "@@" numbering shorthand by GNU
patch, which not only showed that git-apply thought it meant the number
was duplicated (when it means that the second number is 1), but my tests
showed than when git-apply mis-understood the number, it would then not
raise an alarm about it if the patch ended early.
Now, this doesn't actually _matter_, since with a three-line context, the
only case that "x,1" will be shorthanded to "x" is when x itself is 1 (in
which case git-apply got it right), but the fact that git-apply would also
silently accept truncated patches was a missed opportunity for additional
sanity-checking.
So make git-apply refuse to look at a patch fragment that ends early.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was triggered by me testing the "@@" numbering shorthand by GNU
patch, which not only showed that git-apply thought it meant the number
was duplicated (when it means that the second number is 1), but my tests
showed than when git-apply mis-understood the number, it would then not
raise an alarm about it if the patch ended early.
Now, this doesn't actually _matter_, since with a three-line context, the
only case that "x,1" will be shorthanded to "x" is when x itself is 1 (in
which case git-apply got it right), but the fact that git-apply would also
silently accept truncated patches was a missed opportunity for additional
sanity-checking.
So make git-apply refuse to look at a patch fragment that ends early.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Removed bogus "<snap>" identifier.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Clarify and expand some hook documentation.
Clarify update and post-update hooks.
Made a few references to the hooks documentation.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Clarify update and post-update hooks.
Made a few references to the hooks documentation.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
commit-tree: check return value from write_sha1_file()
... found by Matthias Kestenholz.
Signed-off-by: Junio C Hamano <junkio@cox.net>
... found by Matthias Kestenholz.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'jc/cvsimport'
* jc/cvsimport:
cvsimport: fix reading from rev-parse
cvsimport: honor -i and non -i upon subsequent imports
* jc/cvsimport:
cvsimport: fix reading from rev-parse
cvsimport: honor -i and non -i upon subsequent imports
Merge branch 'jc/pull'
* jc/pull:
git-pull: reword "impossible to fast-forward" message.
git-pull: further safety while on tracking branch.
* jc/pull:
git-pull: reword "impossible to fast-forward" message.
git-pull: further safety while on tracking branch.
Merge branch 'jc/fetch'
* jc/fetch:
fetch: exit non-zero when fast-forward check fails.
* jc/fetch:
fetch: exit non-zero when fast-forward check fails.
send-email: Identify author at the top when sending e-mail
git-send-email did not check if the sender is the same as the
patch author. Follow the "From: at the beginning" convention to
propagate the patch author correctly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-send-email did not check if the sender is the same as the
patch author. Follow the "From: at the beginning" convention to
propagate the patch author correctly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Format tweaks for asciidoc.
Some documentation "options" were followed by independent preformatted
paragraphs. Now they are associated plain text paragraphs. The
difference is clear in the generated html.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some documentation "options" were followed by independent preformatted
paragraphs. Now they are associated plain text paragraphs. The
difference is clear in the generated html.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-pull: reword "impossible to fast-forward" message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-pull: further safety while on tracking branch.
Running 'git pull' while on the tracking branch has a built-in
safety valve to fast-forward the index and working tree to match
the branch head, but it errs on the safe side too cautiously.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Running 'git pull' while on the tracking branch has a built-in
safety valve to fast-forward the index and working tree to match
the branch head, but it errs on the safe side too cautiously.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-apply: do not barf when updating an originally empty file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
http-push.c: squelch C90 warnings.
If you write code after declarations in a block, gcc scolds you
with "warning: ISO C90 forbids mixed declarations and code".
Signed-off-by: Junio C Hamano <junkio@cox.net>
If you write code after declarations in a block, gcc scolds you
with "warning: ISO C90 forbids mixed declarations and code".
Signed-off-by: Junio C Hamano <junkio@cox.net>
fix field width/precision warnings in blame.c
Using "size_t" values for printf field width/precision upsets gcc, it
wants to see an "int".
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Using "size_t" values for printf field width/precision upsets gcc, it
wants to see an "int".
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
contrib/git-svn: allow rebuild to work on non-linear remote heads
Because committing back to an SVN repository from different
machines can result in different lineages, two different
repositories running git-svn can result in different commit
SHA1s (but of the same tree). Sometimes trees that are tracked
independently are merged together (usually via children),
resulting in non-unique git-svn-id: lines in rev-list.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because committing back to an SVN repository from different
machines can result in different lineages, two different
repositories running git-svn can result in different commit
SHA1s (but of the same tree). Sometimes trees that are tracked
independently are merged together (usually via children),
resulting in non-unique git-svn-id: lines in rev-list.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
http-push: don't assume char is signed
Declare remote_dir_exists[] as signed char to be sure that values of -1
are valid.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Declare remote_dir_exists[] as signed char to be sure that values of -1
are valid.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
http-push: add support for deleting remote branches
Processes new command-line arguments -d and -D to remove a remote branch
if the following conditions are met:
- one branch name is present on the command line
- the specified branch name matches exactly one remote branch name
- the remote HEAD is a symref
- the specified branch is not the remote HEAD
- the remote HEAD resolves to an object that exists locally (-d only)
- the specified branch resolves to an object that exists locally (-d only)
- the specified branch is an ancestor of the remote HEAD (-d only)
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Processes new command-line arguments -d and -D to remove a remote branch
if the following conditions are met:
- one branch name is present on the command line
- the specified branch name matches exactly one remote branch name
- the remote HEAD is a symref
- the specified branch is not the remote HEAD
- the remote HEAD resolves to an object that exists locally (-d only)
- the specified branch resolves to an object that exists locally (-d only)
- the specified branch is an ancestor of the remote HEAD (-d only)
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Be verbose when !initial commit
verbose option in git-commit.sh lead us to run git-diff-index, which
needs a commit-ish we are making diff against. When we are commiting
the fist set, we obviously don't have any commit-ish in the repo. So
we just skip the git-diff-index run.
It might be possible to produce diff against empty but do we need
that?
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
verbose option in git-commit.sh lead us to run git-diff-index, which
needs a commit-ish we are making diff against. When we are commiting
the fist set, we obviously don't have any commit-ish in the repo. So
we just skip the git-diff-index run.
It might be possible to produce diff against empty but do we need
that?
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix multi-paragraph list items in OPTIONS section
This patch makes the html docs right, makes the asciidoc docs a bit odd
but consistent with what is there already, and makes the manpages look
OK using docbook-xsl 1.68, but miss a paragraph separator when using 1.69.
For the manpages, current is like
-A <author_file>
Read a file with lines on the form
username = User's Full Name <email@addr.es>
and use "User's Full Name <email@addr.es>" as the GIT
With this patch, docbook-xsl v1.68 looks like
-A <author_file>
Read a file with lines on the form
username = User's Full Name <email@addr.es>
and use "User's Full Name <email@addr.es>" as the GIT author and
while docbook-xsl v1.69 becomes
-A <author_file>
Read a file with lines on the form
username = User's Full Name <email@addr.es>
and use "User's Full Name <email@addr.es>" as the GIT author and
The extra indentation is to keep the v1.69 manpage looking sane.
This patch makes the html docs right, makes the asciidoc docs a bit odd
but consistent with what is there already, and makes the manpages look
OK using docbook-xsl 1.68, but miss a paragraph separator when using 1.69.
For the manpages, current is like
-A <author_file>
Read a file with lines on the form
username = User's Full Name <email@addr.es>
and use "User's Full Name <email@addr.es>" as the GIT
With this patch, docbook-xsl v1.68 looks like
-A <author_file>
Read a file with lines on the form
username = User's Full Name <email@addr.es>
and use "User's Full Name <email@addr.es>" as the GIT author and
while docbook-xsl v1.69 becomes
-A <author_file>
Read a file with lines on the form
username = User's Full Name <email@addr.es>
and use "User's Full Name <email@addr.es>" as the GIT author and
The extra indentation is to keep the v1.69 manpage looking sane.
http-fetch: nicer warning for a server with unreliable 404 status
When a repository otherwise properly prepared is served by a
dumb HTTP server that sends "No such page" output with 200
status for human consumption to a request for a page that does
not exist, the users will get an alarming "File X corrupt" error
message. Hint that they might be dealing with such a server at
the end and suggest running fsck-objects to check if the result
is OK (the pack-fallback code does the right thing in this case
so unless a loose object file was actually corrupt the result
should check OK).
Signed-off-by: Junio C Hamano <junkio@cox.net>
When a repository otherwise properly prepared is served by a
dumb HTTP server that sends "No such page" output with 200
status for human consumption to a request for a page that does
not exist, the users will get an alarming "File X corrupt" error
message. Hint that they might be dealing with such a server at
the end and suggest running fsck-objects to check if the result
is OK (the pack-fallback code does the right thing in this case
so unless a loose object file was actually corrupt the result
should check OK).
Signed-off-by: Junio C Hamano <junkio@cox.net>
generate-cmdlist: style cleanups.
Instead of giving multiple commands concatenated with semicolon
to sed, write them on separate lines.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of giving multiple commands concatenated with semicolon
to sed, write them on separate lines.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add missing semicolon to sed command.
generate-cmdlist.sh is giving errors messages from sed on Mac OS
10.4 due to a missing semicolon.
Signed-off-by: Junio C Hamano <junkio@cox.net>
generate-cmdlist.sh is giving errors messages from sed on Mac OS
10.4 due to a missing semicolon.
Signed-off-by: Junio C Hamano <junkio@cox.net>
unpack_delta_entry(): reduce memory footprint.
Currently we unpack the delta data from the pack and then unpack
the base object to apply that delta data to it. When getting an
object that is deeply deltified, we can reduce memory footprint
by unpacking the base object first and then unpacking the delta
data, because we will need to keep at most one delta data in
memory that way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently we unpack the delta data from the pack and then unpack
the base object to apply that delta data to it. When getting an
object that is deeply deltified, we can reduce memory footprint
by unpacking the base object first and then unpacking the delta
data, because we will need to keep at most one delta data in
memory that way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git.el: Added a function to diff against the other heads in a merge.
git-diff-file-merge-head generates a diff against the first merge
head, or with a prefix argument against the nth head. Bound to `d h'
by default.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-diff-file-merge-head generates a diff against the first merge
head, or with a prefix argument against the nth head. Bound to `d h'
by default.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git.el: Get the default user name and email from the repository config.
If user name or email are not set explicitly, get them from the
user.name and user.email configuration values before falling back to
the Emacs defaults.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If user name or email are not set explicitly, get them from the
user.name and user.email configuration values before falling back to
the Emacs defaults.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git.el: More robust handling of subprocess errors when returning strings.
Make sure that functions that call a git process and return a string
always return nil when the subprocess failed.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make sure that functions that call a git process and return a string
always return nil when the subprocess failed.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Makefile: Add TAGS and tags targets
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
ls-files: Don't require exclude files to end with a newline.
Without this patch, the last line of an exclude file is silently
ignored if it doesn't end with a newline.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without this patch, the last line of an exclude file is silently
ignored if it doesn't end with a newline.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-pull: run repo-config with dash form.
... as discussed on the list for consistency.
Signed-off-by: Junio C Hamano <junkio@cox.net>
... as discussed on the list for consistency.
Signed-off-by: Junio C Hamano <junkio@cox.net>
cvsimport: fix reading from rev-parse
The updated code reads the tip of the current branch before and
after the import runs, but forgot to chomp what we read from the
command. The read-tree command did not them with the trailing
LF.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The updated code reads the tip of the current branch before and
after the import runs, but forgot to chomp what we read from the
command. The read-tree command did not them with the trailing
LF.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'jc/empty'
* jc/empty:
revision traversal: --remove-empty fix (take #2).
revision traversal: --remove-empty fix.
Conflicts:
revision.c (adjust for the updates by Fredrik)
* jc/empty:
revision traversal: --remove-empty fix (take #2).
revision traversal: --remove-empty fix.
Conflicts:
revision.c (adjust for the updates by Fredrik)
3% tighter packs for free
This patch makes for 3.4% smaller pack with the git repository, and
a bit more than 3% smaller pack with the kernel repository.
And so with _no_ measurable CPU difference.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch makes for 3.4% smaller pack with the git repository, and
a bit more than 3% smaller pack with the kernel repository.
And so with _no_ measurable CPU difference.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Rewrite synopsis to clarify the two primary uses of git-checkout.
Fix a few typo/grammar problems.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix a few typo/grammar problems.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix minor typo.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Reference git-commit-tree for env vars.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Clarify git-rebase example commands.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document the default source of template files.
Also explain a bit more about how the template option works.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also explain a bit more about how the template option works.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Call out the two different uses of git-branch and fix a typo.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add git-show reference
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
fetch: exit non-zero when fast-forward check fails.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
cvsimport: honor -i and non -i upon subsequent imports
Documentation says -i is "import only", so without it,
subsequent import should update the current branch and working
tree files in a sensible way.
"A sensible way" defined by this commit is "act as if it is a
git pull from foreign repository which happens to be CVS not
git". So:
- If importing into the current branch (note that cvsimport
requires the tracking branch is pristine -- you checked out
the tracking branch but it is your responsibility not to make
your own commits there), fast forward the branch head and
match the index and working tree using two-way merge, just
like "git pull" does.
- If importing into a separate tracking branch, update that
branch head, and merge it into your current branch, again,
just like "git pull" does.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation says -i is "import only", so without it,
subsequent import should update the current branch and working
tree files in a sensible way.
"A sensible way" defined by this commit is "act as if it is a
git pull from foreign repository which happens to be CVS not
git". So:
- If importing into the current branch (note that cvsimport
requires the tracking branch is pristine -- you checked out
the tracking branch but it is your responsibility not to make
your own commits there), fast forward the branch head and
match the index and working tree using two-way merge, just
like "git pull" does.
- If importing into a separate tracking branch, update that
branch head, and merge it into your current branch, again,
just like "git pull" does.
Signed-off-by: Junio C Hamano <junkio@cox.net>
blame: Fix git-blame <directory>
Before this patch git-blame <directory> gave non-sensible output. (It
assigned blame to some random file in <directory>) Abort with an error
message instead.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Before this patch git-blame <directory> gave non-sensible output. (It
assigned blame to some random file in <directory>) Abort with an error
message instead.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
blame: Nicer output
As pointed out by Junio, it may be dangerous to cut off people's names
after 15 bytes. If the name is encoded in an encoding which uses more
than one byte per code point we may end up with outputting garbage.
Instead of trying to do something smart, just output the entire name.
We don't gain much screen space by chopping it off anyway.
Furthermore, only output the file name if we actually found any
renames.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As pointed out by Junio, it may be dangerous to cut off people's names
after 15 bytes. If the name is encoded in an encoding which uses more
than one byte per code point we may end up with outputting garbage.
Instead of trying to do something smart, just output the entire name.
We don't gain much screen space by chopping it off anyway.
Furthermore, only output the file name if we actually found any
renames.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
fix imap-send for OSX
This patch works... I've been using it to stay current.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch works... I've been using it to stay current.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Let merge set the default strategy.
If the user does not set a merge strategy for git-pull,
let git-merge calculate a default strategy.
[jc: with minor stylistic tweaks]
Signed-off-by: Mark Hollomon <markhollomon@comcast.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user does not set a merge strategy for git-pull,
let git-merge calculate a default strategy.
[jc: with minor stylistic tweaks]
Signed-off-by: Mark Hollomon <markhollomon@comcast.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix broken slot reuse when fetching alternates
When fetching alternates, http-fetch may reuse the slot to fetch non-http
alternates if http-alternates does not exist. When doing so, it now needs
to update the slot's finished status so run_active_slot waits for the
non-http alternates request to finish.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When fetching alternates, http-fetch may reuse the slot to fetch non-http
alternates if http-alternates does not exist. When doing so, it now needs
to update the slot's finished status so run_active_slot waits for the
non-http alternates request to finish.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'jc/pack'
* jc/pack:
pack-objects: simplify "thin" pack.
verify-pack -v: show delta-chain histogram.
* jc/pack:
pack-objects: simplify "thin" pack.
verify-pack -v: show delta-chain histogram.
Merge branch 'jc/fsck'
* jc/fsck:
fsck-objects: Remove --standalone
* jc/fsck:
fsck-objects: Remove --standalone
Merge branch 'nh/http'
* nh/http:
http-push: cleanup
http-push: support for updating remote info/refs
http-push: improve remote lock management
http-push: refactor remote file/directory processing
HTTP slot reuse fixes
http-push: fix revision walk
* nh/http:
http-push: cleanup
http-push: support for updating remote info/refs
http-push: improve remote lock management
http-push: refactor remote file/directory processing
HTTP slot reuse fixes
http-push: fix revision walk
Merge branch 'fk/blame'
* fk/blame:
blame: Rename detection (take 2)
rev-lib: Make it easy to do rename tracking (take 2)
Make it possible to not clobber object.util in sort_in_topological_order (take 2)
* fk/blame:
blame: Rename detection (take 2)
rev-lib: Make it easy to do rename tracking (take 2)
Make it possible to not clobber object.util in sort_in_topological_order (take 2)
revision traversal: --remove-empty fix (take #2).
Marco Costalba reports that --remove-empty omits the commit that
created paths we are interested in. try_to_simplify_commit()
logic was dropping a parent we introduced those paths against,
which I think is not what we meant. Instead, this makes such
parent parentless.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Marco Costalba reports that --remove-empty omits the commit that
created paths we are interested in. try_to_simplify_commit()
logic was dropping a parent we introduced those paths against,
which I think is not what we meant. Instead, this makes such
parent parentless.
Signed-off-by: Junio C Hamano <junkio@cox.net>
revision traversal: --remove-empty fix.
Marco Costalba reports that --remove-empty omits the commit that
created paths we are interested in. try_to_simplify_commit()
logic was dropping a parent we introduced those paths against,
which I think is not what we meant. Instead, this marks such
parent uninteresting. The traversal does not go beyond that
parent as advertised, but we still say that the current commit
changed things from that parent.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Marco Costalba reports that --remove-empty omits the commit that
created paths we are interested in. try_to_simplify_commit()
logic was dropping a parent we introduced those paths against,
which I think is not what we meant. Instead, this marks such
parent uninteresting. The traversal does not go beyond that
parent as advertised, but we still say that the current commit
changed things from that parent.
Signed-off-by: Junio C Hamano <junkio@cox.net>
annotate-tests: override VISUAL when running tests.
The tests hang for me waiting for Emacs with its output directed
somewhere strage, because I hedged my bets and set both EDITOR and
VISUAL to run Emacs.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The tests hang for me waiting for Emacs with its output directed
somewhere strage, because I hedged my bets and set both EDITOR and
VISUAL to run Emacs.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
imap-send: Add missing #include for macosx
There is a compile error without that.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There is a compile error without that.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-diff: -p disables rename detection.
imap-send: cleanup execl() call to use NULL sentinel instead of 0
Some versions of gcc check that calls to the exec() family have the proper
sentinel for variadic calls. This should be (char *) NULL according to the
man page. Although for all other purposes the 0 is equivalent, gcc
nevertheless does emit a warning for 0 and not for NULL. This also makes the
usage consistent throughout git.
The whitespace in function calls throughout imap-send.c has its own style,
so I left it that way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some versions of gcc check that calls to the exec() family have the proper
sentinel for variadic calls. This should be (char *) NULL according to the
man page. Although for all other purposes the 0 is equivalent, gcc
nevertheless does emit a warning for 0 and not for NULL. This also makes the
usage consistent throughout git.
The whitespace in function calls throughout imap-send.c has its own style,
so I left it that way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
annotate.perl triggers rpm bug
RPM, at least on Fedora boxes, automatically creates a
dependency for any perl "use" lines, and one of the help text
lines unfortunately begins like this:
-S, --rev-file revs-file
use revs from revs-file instead of calling git-rev-list
RPM gets confused and creates a false dependecy for the
nonexistent perl package "revs". Obviously this creates a
problem when someone goes to install the git-core rpm.
Since other help sentences all start with capital letter, make
this one match them by upcasing "Use". As a side effect, RPM
stops getting confused.
Signed-off-by: Junio C Hamano <junkio@cox.net>
RPM, at least on Fedora boxes, automatically creates a
dependency for any perl "use" lines, and one of the help text
lines unfortunately begins like this:
-S, --rev-file revs-file
use revs from revs-file instead of calling git-rev-list
RPM gets confused and creates a false dependecy for the
nonexistent perl package "revs". Obviously this creates a
problem when someone goes to install the git-core rpm.
Since other help sentences all start with capital letter, make
this one match them by upcasing "Use". As a side effect, RPM
stops getting confused.
Signed-off-by: Junio C Hamano <junkio@cox.net>
http-push: cleanup
More consistent usage string, condense push output, remove extra slashes
in URLs, fix unused variables, include HTTP method name in failure
messages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
More consistent usage string, condense push output, remove extra slashes
in URLs, fix unused variables, include HTTP method name in failure
messages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
http-push: support for updating remote info/refs
If info/refs exists on the remote, get a lock on info/refs, make sure that
there is a local copy of the object referenced in each remote ref (in case
someone else added a tag we don't have locally), do all the refspec updates,
and generate and send an updated info/refs file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If info/refs exists on the remote, get a lock on info/refs, make sure that
there is a local copy of the object referenced in each remote ref (in case
someone else added a tag we don't have locally), do all the refspec updates,
and generate and send an updated info/refs file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
http-push: improve remote lock management
Associate the remote locks with the remote repo, add a function to check
and refresh all current locks.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Associate the remote locks with the remote repo, add a function to check
and refresh all current locks.
Signed-off-by: Junio C Hamano <junkio@cox.net>
http-push: refactor remote file/directory processing
Replace single-use functions with one that can get a list of remote
collections and pass file/directory information to user-defined functions
for processing.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Replace single-use functions with one that can get a list of remote
collections and pass file/directory information to user-defined functions
for processing.
Signed-off-by: Junio C Hamano <junkio@cox.net>
HTTP slot reuse fixes
Incorporate into http-push a fix related to accessing slot results after
the slot was reused, and fix a case in run_active_slot where a
finished slot wasn't detected if the slot was reused.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Incorporate into http-push a fix related to accessing slot results after
the slot was reused, and fix a case in run_active_slot where a
finished slot wasn't detected if the slot was reused.
Signed-off-by: Junio C Hamano <junkio@cox.net>
http-push: fix revision walk
The revision walk was not including tags because setup_revisions zeroes out
the revs flags. Pass --objects so it picks up all the necessary bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The revision walk was not including tags because setup_revisions zeroes out
the revs flags. Pass --objects so it picks up all the necessary bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
blame: Rename detection (take 2)
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
rev-lib: Make it easy to do rename tracking (take 2)
prune_fn in the rev_info structure is called in place of
try_to_simplify_commit. This makes it possible to do rename tracking
with a custom try_to_simplify_commit-like function.
This commit also introduces init_revisions which initialises the rev_info
structure with default values.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
prune_fn in the rev_info structure is called in place of
try_to_simplify_commit. This makes it possible to do rename tracking
with a custom try_to_simplify_commit-like function.
This commit also introduces init_revisions which initialises the rev_info
structure with default values.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make it possible to not clobber object.util in sort_in_topological_order (take 2)
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add git-imap-send, derived from isync 1.0.1.
git-imap-send drops a patch series generated by git-format-patch into an
IMAP folder. This allows patch submitters to send patches through their
own mail program.
git-imap-send uses the following values from the GIT repository
configuration:
The target IMAP folder:
[imap]
Folder = "INBOX.Drafts"
A command to open an ssh tunnel to the imap mail server.
[imap]
Tunnel = "ssh -q user@imap.server.com /usr/bin/imapd ./Maildir
2> /dev/null"
[imap]
Host = imap.server.com
User = bob
Password = pwd
Port = 143
git-imap-send drops a patch series generated by git-format-patch into an
IMAP folder. This allows patch submitters to send patches through their
own mail program.
git-imap-send uses the following values from the GIT repository
configuration:
The target IMAP folder:
[imap]
Folder = "INBOX.Drafts"
A command to open an ssh tunnel to the imap mail server.
[imap]
Tunnel = "ssh -q user@imap.server.com /usr/bin/imapd ./Maildir
2> /dev/null"
[imap]
Host = imap.server.com
User = bob
Password = pwd
Port = 143
repack: prune loose objects when -d is given
[jc: the request originally came from Martin Atukunda, which was
improved further by Alex Riesen]
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: the request originally came from Martin Atukunda, which was
improved further by Alex Riesen]
Signed-off-by: Junio C Hamano <junkio@cox.net>
try_to_simplify_commit(): do not skip inspecting tree change at boundary.
When git-rev-list (and git-log) collapsed ancestry chain to
commits that touch specified paths, we failed to inspect and
notice tree changes when we are about to hit uninteresting
parent. This resulted in "git rev-list since.. -- file" to
always show the child commit after the lower bound, even if it
does not touch the file. This commit fixes it.
Thanks for Catalin for reporting this.
See also:
461cf59f8924f174d7a0dcc3d77f576d93ed29a4
Signed-off-by: Junio C Hamano <junkio@cox.net>
When git-rev-list (and git-log) collapsed ancestry chain to
commits that touch specified paths, we failed to inspect and
notice tree changes when we are about to hit uninteresting
parent. This resulted in "git rev-list since.. -- file" to
always show the child commit after the lower bound, even if it
does not touch the file. This commit fixes it.
Thanks for Catalin for reporting this.
See also:
461cf59f8924f174d7a0dcc3d77f576d93ed29a4
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoFix t1200 test for breakage caused by removal of full-stop at the end of fast-forward...
Fix t1200 test for breakage caused by removal of full-stop at the end of fast-forward message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Describe how to add extra mail header lines in mail generated by git-format-patch.
Document the --attach flag.
allow double click on current HEAD id after git-pull
Double click on to current HEAD commit id is not possible,
the dot has to go.
[jc: by popular requests.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Double click on to current HEAD commit id is not possible,
the dot has to go.
[jc: by popular requests.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
fsck-objects: Remove --standalone
The fsck-objects command (back then it was called fsck-cache)
used to complain if objects referred to by files in .git/refs/
or objects stored in files under .git/objects/??/ were not found
as stand-alone SHA1 files (i.e. found in alternate object pools
or packed archives stored under .git/objects/pack). Back then,
packs and alternates were new curiosity and having everything as
loose objects were the norm.
When we adjusted the behaviour of fsck-cache to consider objects
found in packs are OK, we introduced the --standalone flag as a
backward compatibility measure.
It still correctly checks if your repository is complete and
consists only of loose objects, so in that sense it is doing the
"right" thing, but checking that is pointless these days. This
commit removes --standalone flag.
See also:
23676d407c63a6f67f8ce3ff192199bda03e6a03
8a498a05c3c6b2f53db669b24f36257ab213eb4c
Signed-off-by: Junio C Hamano <junkio@cox.net>
The fsck-objects command (back then it was called fsck-cache)
used to complain if objects referred to by files in .git/refs/
or objects stored in files under .git/objects/??/ were not found
as stand-alone SHA1 files (i.e. found in alternate object pools
or packed archives stored under .git/objects/pack). Back then,
packs and alternates were new curiosity and having everything as
loose objects were the norm.
When we adjusted the behaviour of fsck-cache to consider objects
found in packs are OK, we introduced the --standalone flag as a
backward compatibility measure.
It still correctly checks if your repository is complete and
consists only of loose objects, so in that sense it is doing the
"right" thing, but checking that is pointless these days. This
commit removes --standalone flag.
See also:
23676d407c63a6f67f8ce3ff192199bda03e6a03
8a498a05c3c6b2f53db669b24f36257ab213eb4c
Signed-off-by: Junio C Hamano <junkio@cox.net>
refs.c::do_for_each_ref(): Finish error message lines with "\n"
We used fprintf() to show an error message without terminating
it with LF; use error() for that.
cf. c401cb48e77459a4ccad76888ad31bef252facc5
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used fprintf() to show an error message without terminating
it with LF; use error() for that.
cf. c401cb48e77459a4ccad76888ad31bef252facc5
Signed-off-by: Junio C Hamano <junkio@cox.net>
Nicer output from 'git'
[jc: with suggestions by Jan-Benedict Glaw]
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: with suggestions by Jan-Benedict Glaw]
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use #define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0]))
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove trailing dot after short description
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix some inconsistencies in the docs
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
contrib/git-svn: fix a harmless warning on rebuild (with old repos)
It's only for repositories that were imported with very early
versions of git-svn. Unfortunately, some of those repos are out
in the wild already, so fix this warning.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It's only for repositories that were imported with very early
versions of git-svn. Unfortunately, some of those repos are out
in the wild already, so fix this warning.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
contrib/git-svn: remove the --no-stop-on-copy flag
Output a big warning if somebody actually has a pre-1.0 version
of svn that doesn't support it.
Thanks to Yann Dirson for reminding me it still existed
and attempting to re-enable it :)
I think I subconciously removed support for it earlier...
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Output a big warning if somebody actually has a pre-1.0 version
of svn that doesn't support it.
Thanks to Yann Dirson for reminding me it still existed
and attempting to re-enable it :)
I think I subconciously removed support for it earlier...
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
contrib/git-svn: fix svn compat and fetch args
'svn info' doesn't work with URLs in svn <= 1.1. Now we
only run svn info in local directories.
As a side effect, this should also work better for 'init' off
directories that are no longer in the latest revision of the
repository.
svn checkout -r<revision> arguments are fixed.
Newer versions of svn (1.2.x) seem to need URL@REV as well as
-rREV to checkout a particular revision...
Add an example in the manpage of how to track directory that has
been moved since its initial revision.
A huge thanks to Yann Dirson for the bug reporting and testing
my original patch. Thanks also to Junio C Hamano for suggesting
a safer way to use git-rev-parse.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
'svn info' doesn't work with URLs in svn <= 1.1. Now we
only run svn info in local directories.
As a side effect, this should also work better for 'init' off
directories that are no longer in the latest revision of the
repository.
svn checkout -r<revision> arguments are fixed.
Newer versions of svn (1.2.x) seem to need URL@REV as well as
-rREV to checkout a particular revision...
Add an example in the manpage of how to track directory that has
been moved since its initial revision.
A huge thanks to Yann Dirson for the bug reporting and testing
my original patch. Thanks also to Junio C Hamano for suggesting
a safer way to use git-rev-parse.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Don't recurse into parents marked uninteresting.
revision.c:make_parents_uninteresting() is exponential with the number
of merges in the tree. That's fine -- unless some other part of git
already has pulled the whole commit tree into memory ...
Signed-off-by: Junio C Hamano <junkio@cox.net>
revision.c:make_parents_uninteresting() is exponential with the number
of merges in the tree. That's fine -- unless some other part of git
already has pulled the whole commit tree into memory ...
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff-delta: bound hash list length to avoid O(m*n) behavior
The diff-delta code can exhibit O(m*n) behavior with some patological
data set where most hash entries end up in the same hash bucket.
To prevent this, a limit is imposed to the number of entries that can
exist in the same hash bucket.
Because of the above the code is a tiny bit more expensive on average,
even if some small optimizations were added as well to atenuate the
overhead. But the problematic samples used to diagnoze the issue are now
orders of magnitude less expensive to process with only a slight loss in
compression.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The diff-delta code can exhibit O(m*n) behavior with some patological
data set where most hash entries end up in the same hash bucket.
To prevent this, a limit is imposed to the number of entries that can
exist in the same hash bucket.
Because of the above the code is a tiny bit more expensive on average,
even if some small optimizations were added as well to atenuate the
overhead. But the problematic samples used to diagnoze the issue are now
orders of magnitude less expensive to process with only a slight loss in
compression.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
test-delta needs zlib to compile
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-fmt-merge-msg cleanup
Since I've started using the "merge.summary" flag in my repo, my merge
messages look nicer, but I dislike how I get notifications of merges
within merges.
So I'd suggest this trivial change..
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since I've started using the "merge.summary" flag in my repo, my merge
messages look nicer, but I dislike how I get notifications of merges
within merges.
So I'd suggest this trivial change..
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
repo-config: give value_ a sane default so regexec won't segfault
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update http-push functionality
This brings http-push functionality more in line with the ssh/git version,
by borrowing bits from send-pack and rev-list to process refspecs and
revision history in more standard ways. Also, the status of remote objects
is determined using PROPFIND requests for the object directory rather than
HEAD requests for each object - while it may be less efficient for small
numbers of objects, this approach is able to get the status of all remote
loose objects in a maximum of 256 requests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This brings http-push functionality more in line with the ssh/git version,
by borrowing bits from send-pack and rev-list to process refspecs and
revision history in more standard ways. Also, the status of remote objects
is determined using PROPFIND requests for the object directory rather than
HEAD requests for each object - while it may be less efficient for small
numbers of objects, this approach is able to get the status of all remote
loose objects in a maximum of 256 requests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
cvsimport: Remove master-updating code
The code which tried to update the master branch was somewhat broken.
=> People should do that manually, with "git merge".
Signed-off-by: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The code which tried to update the master branch was somewhat broken.
=> People should do that manually, with "git merge".
Signed-off-by: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'sp/checkout'
* sp/checkout:
Add --temp and --stage=all options to checkout-index.
* sp/checkout:
Add --temp and --stage=all options to checkout-index.
Merge branch 'fd/asciidoc'
* fd/asciidoc:
Tweak asciidoc output to work with broken docbook-xsl
* fd/asciidoc:
Tweak asciidoc output to work with broken docbook-xsl
Allow format-patch to attach patches
The --attach patch to git-format-patch to attach patches instead of
inlining them. Some mailers linewrap inlined patches (eg. Mozilla).
Signed-off-by: Junio C Hamano <junkio@cox.net>
The --attach patch to git-format-patch to attach patches instead of
inlining them. Some mailers linewrap inlined patches (eg. Mozilla).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow adding arbitary lines in the mail header generated by format-patch.
Entries may be added to the config file as follows:
[format]
headers = "Organization: CodeWeavers\nTo: wine-patches
<wine-patches@winehq.org>\n"
Signed-off-by: Junio C Hamano <junkio@cox.net>
Entries may be added to the config file as follows:
[format]
headers = "Organization: CodeWeavers\nTo: wine-patches
<wine-patches@winehq.org>\n"
Signed-off-by: Junio C Hamano <junkio@cox.net>
pack-objects: simplify "thin" pack.
There was a misguided logic to overly prefer using objects that
we are not going to pack as the base object. This was
unnecessary. It does not matter to the unpacking side where the
base object is -- it matters more to make the resulting delta
smaller.
Signed-off-by: Junio C Hamano <junkio@cox.net>
There was a misguided logic to overly prefer using objects that
we are not going to pack as the base object. This was
unnecessary. It does not matter to the unpacking side where the
base object is -- it matters more to make the resulting delta
smaller.
Signed-off-by: Junio C Hamano <junkio@cox.net>
annotate-blame: tests incomplete lines.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
blame: unbreak "diff -U 0".
The commit 604c86d15bb319a1e93ba218fca48ce1c500ae52 changed the
original "diff -u0" to "diff -u -U 0" for portability.
A big mistake without proper testing.
The form "diff -u -U 0" shows the default 3-line contexts,
because -u and -U 0 contradicts with each other; "diff -U 0" (or
its longhand "diff --unified=0") is what we meant.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The commit 604c86d15bb319a1e93ba218fca48ce1c500ae52 changed the
original "diff -u0" to "diff -u -U 0" for portability.
A big mistake without proper testing.
The form "diff -u -U 0" shows the default 3-line contexts,
because -u and -U 0 contradicts with each other; "diff -U 0" (or
its longhand "diff --unified=0") is what we meant.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Tweak asciidoc output to work with broken docbook-xsl
docbook-xsl v1.68 incorrectly converts "<screen>" from docbook to
manpage by not rendering it verbatim. v1.69 handles it correctly, but
not many current popular distributions ship with it.
asciidoc by default converts "listingblock" to "<screen>". This change
causes asciidoc in git to convert "listingblock" to "<literallayout>", which
both old and new docbook-xsl handle correctly.
The difference can be seen in any manpage which includes a multi-line
example, such as git-branch.
[jc: the original patch was an disaster for html backends, so I made
it apply only to docbook backends. ]
Signed-off-by: Junio C Hamano <junkio@cox.net>
docbook-xsl v1.68 incorrectly converts "<screen>" from docbook to
manpage by not rendering it verbatim. v1.69 handles it correctly, but
not many current popular distributions ship with it.
asciidoc by default converts "listingblock" to "<screen>". This change
causes asciidoc in git to convert "listingblock" to "<literallayout>", which
both old and new docbook-xsl handle correctly.
The difference can be seen in any manpage which includes a multi-line
example, such as git-branch.
[jc: the original patch was an disaster for html backends, so I made
it apply only to docbook backends. ]
Signed-off-by: Junio C Hamano <junkio@cox.net>