GIT 1.5.1.2
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
perl: install private Error.pm if the site version is older than our own
bdash (on IRC) had a problem with Git.pm (via git-svn) when his
site installation of Error.pm was older than the version we
package.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
bdash (on IRC) had a problem with Git.pm (via git-svn) when his
site installation of Error.pm was older than the version we
package.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-clone: fix dumb protocol transport to clone from pack-pruned ref
This forward-ports a fix from 2986c022 to git-clone.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This forward-ports a fix from 2986c022 to git-clone.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update git-config documentation
Documentation/git-config.txt: Added documentation for --system
Documentation/builtin-config.c: Added --system to the short usage
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-config.txt: Added documentation for --system
Documentation/builtin-config.c: Added --system to the short usage
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix unmatched emphasis tag in git-tutorial
In asciidoc 7.1.2 and prior there is no obvious way to get:
'add'ing
to emphasize only the "add", instead it treats the first apostrophe as the
beginning of an emphasis, and the second apostrophe as a regular
apostrophe and makes the rest of the line an emphasis since there is no
closing apostrophe. In the newer asciidoc you can do it pretty easily
with __add__ing but I'm not sure it would be best to make that a prereq
for something as silly as this.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In asciidoc 7.1.2 and prior there is no obvious way to get:
'add'ing
to emphasize only the "add", instead it treats the first apostrophe as the
beginning of an emphasis, and the second apostrophe as a regular
apostrophe and makes the rest of the line an emphasis since there is no
closing apostrophe. In the newer asciidoc you can do it pretty easily
with __add__ing but I'm not sure it would be best to make that a prereq
for something as silly as this.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update git-cherry-pick documentation
Documentation/git-cherry-pick.txt: Remove --replay as it is not
handled by the code (-r is however).
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-cherry-pick.txt: Remove --replay as it is not
handled by the code (-r is however).
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update git-archive documentation
Documentation/git-archive.txt: Document -v/--verbose option.
Add -l as short form of --list.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-archive.txt: Document -v/--verbose option.
Add -l as short form of --list.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
fix up strtoul_ui error handling
Two scanf() calls were converted to strtoul_ui() but the return
values were not updated to match. scanf() returns the number of
matched "values" which for this usage is 1 on success. strtoul_ui()
return 0 on success. Update these call sites to match.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Two scanf() calls were converted to strtoul_ui() but the return
values were not updated to match. scanf() returns the number of
matched "values" which for this usage is 1 on success. strtoul_ui()
return 0 on success. Update these call sites to match.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-tar-tree: complete deprecation conversion message
The syntax for git-archive is different; warn about it in the
deprecation message on the manual page.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The syntax for git-archive is different; warn about it in the
deprecation message on the manual page.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-shortlog: Fix two formatting errors in asciidoc documentation
First use [verse] in the SYNOPSIS so that the line break actually
shows.
Secondly drop the quotes around '.mailmap' since this exposes
a bug in our toolchain (didn't bother enough yet to find out wether
it is asciidoc's fault or that of the XSL templates) that leads to
the dot not getting escaped correctly in the roff output and thereby
swallowing the line.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
First use [verse] in the SYNOPSIS so that the line break actually
shows.
Secondly drop the quotes around '.mailmap' since this exposes
a bug in our toolchain (didn't bother enough yet to find out wether
it is asciidoc's fault or that of the XSL templates) that leads to
the dot not getting escaped correctly in the roff output and thereby
swallowing the line.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix overwriting of files when applying contextually independent diffs
Noticed by applying two diffs of different contexts to the same file.
The check for existence of a file was wrong: the test assumed it was
a directory and reset the errno (twice: directly and by calling
lstat). So if an entry existed and was _not_ a directory no attempt
was made to rename into it, because the errno (expected by renaming
code) was already reset to 0. This resulted in error:
fatal: unable to write file file mode 100644
For Linux, removing "errno = 0" is enough, as lstat wont modify errno
if it was successful. The behavior should not be depended upon,
though, so modify the "if" as well.
The test simulates this situation.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Noticed by applying two diffs of different contexts to the same file.
The check for existence of a file was wrong: the test assumed it was
a directory and reset the errno (twice: directly and by calling
lstat). So if an entry existed and was _not_ a directory no attempt
was made to rename into it, because the errno (expected by renaming
code) was already reset to 0. This resulted in error:
fatal: unable to write file file mode 100644
For Linux, removing "errno = 0" is enough, as lstat wont modify errno
if it was successful. The behavior should not be depended upon,
though, so modify the "if" as well.
The test simulates this situation.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: don't allow globs to match regular files
git only tracks the histories of full directories, not
that of individual files. Sometimes, SVN users will
place[1] a regular file in the directory designated
for subdirectories of branches or tags.
Thanks to jrockway on #git for pointing this out.
[1] mistakenly or otherwise, such as a README
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git only tracks the histories of full directories, not
that of individual files. Sometimes, SVN users will
place[1] a regular file in the directory designated
for subdirectories of branches or tags.
Thanks to jrockway on #git for pointing this out.
[1] mistakenly or otherwise, such as a README
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use const qualifier for 'sha1' parameter in delete_ref function
delete_ref function does not change the 'sha1' parameter. Non-const pointer
causes a compiler warning if you call to the function using a const argument.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
delete_ref function does not change the 'sha1' parameter. Non-const pointer
causes a compiler warning if you call to the function using a const argument.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Start preparing for 1.5.1.2
Merge branch 'maint' of git://repo.or.cz/git-gui into maint
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Brown paper bag fix division by 0 in blame
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Brown paper bag fix division by 0 in blame
git-svn: quiet some warnings when run only with --version/--help
These are harmless but annoying. They were introduced in
512b620bd9fef7f170562ecad835e37479f051ce
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
These are harmless but annoying. They were introduced in
512b620bd9fef7f170562ecad835e37479f051ce
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: respect lower bound of -r/--revision when following parent
When an explicit --revision argument is specified, do not fetch
past the specified range into the beginning of history.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When an explicit --revision argument is specified, do not fetch
past the specified range into the beginning of history.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Have sample update hook not refuse deleting a branch through push.
source ref might be 0000...0000 to delete a branch through git-push,
'git <remote> push :<branch>'. The update hook should not decline this.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
source ref might be 0000...0000 to delete a branch through git-push,
'git <remote> push :<branch>'. The update hook should not decline this.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
variable $projectdesc needs to be set before checking against unchanged default.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update git-annotate/git-blame documentation
Moved options that pertained to both git-blame and git-annotate to a
common file blame-options.txt.
builtin-blame.c: Removed --compatibility, --long, --time from the
short usage as they are not handled in the code.
Documentation/git-blame.txt: Removed common options to git-annotate.
Added documentation for --score-debug. Removed --compatibility.
Adjusted usage at top to not wrap on 80 columns.
Documentation/git-annotate.txt: Using common options blame-options.txt.
Documentation/blame-options.txt: Added -b note about associated config
option, added --root note about associated config option, added
documentation for --show-stats. Removed --long, --time, --rev-file as
those options do not really exist. Added documentation for -M/-C taking
an optional score argument for detection of moved lines.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Moved options that pertained to both git-blame and git-annotate to a
common file blame-options.txt.
builtin-blame.c: Removed --compatibility, --long, --time from the
short usage as they are not handled in the code.
Documentation/git-blame.txt: Removed common options to git-annotate.
Added documentation for --score-debug. Removed --compatibility.
Adjusted usage at top to not wrap on 80 columns.
Documentation/git-annotate.txt: Using common options blame-options.txt.
Documentation/blame-options.txt: Added -b note about associated config
option, added --root note about associated config option, added
documentation for --show-stats. Removed --long, --time, --rev-file as
those options do not really exist. Added documentation for -M/-C taking
an optional score argument for detection of moved lines.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update git-apply documentation
Document -v (short form of --verbose). Redo usage
to not wrap on 80 column terminal with typical
settings.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document -v (short form of --verbose). Redo usage
to not wrap on 80 column terminal with typical
settings.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update git-applymbox documentation
Documentation/git-applymbox.txt: updating -u documentation to include
fact that it encodes to the i18n.commitencoding setting, not just utf-8.
Added documentation of -n option to pass -n to git-mailinfo.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-applymbox.txt: updating -u documentation to include
fact that it encodes to the i18n.commitencoding setting, not just utf-8.
Added documentation of -n option to pass -n to git-mailinfo.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update git-am documentation
Documentation/git-am.txt missing several short versions
of options. Added documentation for --resolvemsg=<msg>
command-line option.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-am.txt missing several short versions
of options. Added documentation for --resolvemsg=<msg>
command-line option.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
user-manual: use detached head when rewriting history
This is slightly simpler if we use a detached head. And it's probably
good to have another example that uses this feature.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is slightly simpler if we use a detached head. And it's probably
good to have another example that uses this feature.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
user-manual: start revising "internals" chapter
Minor revisions, cross-references.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Minor revisions, cross-references.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
user-manual: detached HEAD
Add a brief mention of detached HEADs and .git/HEAD.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a brief mention of detached HEADs and .git/HEAD.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
user-manual: fix discussion of default clone
The name "master" isn't actually quite so special. Also, fix some bad
grammar.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The name "master" isn't actually quite so special. Also, fix some bad
grammar.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation: clarify track/no-track option.
Fix the description of the --no-track option so it no longer says the
opposite of what was intended. Also mention branch.autosetupmerge
explicitly.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix the description of the --no-track option so it no longer says the
opposite of what was intended. Also mention branch.autosetupmerge
explicitly.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation: clarify git-checkout -f, minor editing
"Force a re-read of everything" doesn't mean much to me.
Also some minor grammar fixes.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"Force a re-read of everything" doesn't mean much to me.
Also some minor grammar fixes.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation: minor edits of git-lost-found manpage
Minor improvements to grammar and clarity of lost-found manpage.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Minor improvements to grammar and clarity of lost-found manpage.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document -g (--walk-reflogs) option of git-log
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
sscanf/strtoul: parse integers robustly
* builtin-grep.c (strtoul_ui): Move function definition from here, to...
* git-compat-util.h (strtoul_ui): ...here, with an added "base" parameter.
* builtin-grep.c (cmd_grep): Update use of strtoul_ui to include base, "10".
* builtin-update-index.c (read_index_info): Diagnose an invalid mode integer
that is out of range or merely larger than INT_MAX.
(cmd_update_index): Use strtoul_ui, not sscanf.
* convert-objects.c (write_subdirectory): Likewise.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* builtin-grep.c (strtoul_ui): Move function definition from here, to...
* git-compat-util.h (strtoul_ui): ...here, with an added "base" parameter.
* builtin-grep.c (cmd_grep): Update use of strtoul_ui to include base, "10".
* builtin-update-index.c (read_index_info): Diagnose an invalid mode integer
that is out of range or merely larger than INT_MAX.
(cmd_update_index): Use strtoul_ui, not sscanf.
* convert-objects.c (write_subdirectory): Likewise.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge git://git2./pub/scm/gitk/gitk into maint
* git://git2.kernel.org/pub/scm/gitk/gitk:
[PATCH] Improve look-and-feel of the gitk tool.
[PATCH] Teach gitk to use the user-defined UI font everywhere.
* git://git2.kernel.org/pub/scm/gitk/gitk:
[PATCH] Improve look-and-feel of the gitk tool.
[PATCH] Teach gitk to use the user-defined UI font everywhere.
git-blame: Fix overrun in fake_working_tree_commit()
git-blame would overflow commit->buffer when annotating files with long paths.
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-blame would overflow commit->buffer when annotating files with long paths.
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-quiltimport complaining yet still working
There were two bugs: "stop_here" doesn't exist, but the bug that causes
this code to trigger in the *first* place is the wrong use of "$dotest".
It should be ".dotest"
This is essentially the same bug introduced by 87ab7992, one was
fixed with 0d38ab25 but this was somehow left behind.
Signed-off-by: Junio C Hamano <junkio@cox.net>
There were two bugs: "stop_here" doesn't exist, but the bug that causes
this code to trigger in the *first* place is the wrong use of "$dotest".
It should be ".dotest"
This is essentially the same bug introduced by 87ab7992, one was
fixed with 0d38ab25 but this was somehow left behind.
Signed-off-by: Junio C Hamano <junkio@cox.net>
config.txt: Fix grammatical error in description of http.noEPSV
s/doesn't/don't/ since "ftp servers" is plural
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
s/doesn't/don't/ since "ftp servers" is plural
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
config.txt: Change pserver to server in description of gitcvs.*
These variables apply to the SSH access as well, so don't use
pserver here which might confuse users.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
These variables apply to the SSH access as well, so don't use
pserver here which might confuse users.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
config.txt: Document core.autocrlf
Text shamelessly stolen from the 1.5.1 release notes.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Text shamelessly stolen from the 1.5.1 release notes.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
config.txt: Document gitcvs.allbinary
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Do not default to --no-index when given two directories.
git-diff -- a/ b/ always defaulted to --no-index, primarily
because the function is_in_index() was implemented quite
incorrectly.
Noticed by Patrick Maaß and Simon Schubert independently,
initial patch was provided by Patrick but I fixed it
differently.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-diff -- a/ b/ always defaulted to --no-index, primarily
because the function is_in_index() was implemented quite
incorrectly.
Noticed by Patrick Maaß and Simon Schubert independently,
initial patch was provided by Patrick but I fixed it
differently.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use rev-list --reverse in git-rebase.sh
...and drop the last perl dependency in the script.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
...and drop the last perl dependency in the script.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
handle_options in git wrapper miscounts the options it handled.
handle_options did not count the number of used arguments
correctly. When --git-dir was used the extra argument was
not added to the number of handled arguments.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
handle_options did not count the number of used arguments
correctly. When --git-dir was used the extra argument was
not added to the number of handled arguments.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
GIT 1.5.1.1
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
cvsserver: Fix handling of diappeared files on update
Only send a modified response if the client sent a
"Modified" entry. This fixes the case where the
file was locally deleted on the client without
being removed from CVS. In this case the client
will only have sent the Entry for the file but nothing
else.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Acked-by: Martin Langhoff <martin@catalyst.net.nz>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Only send a modified response if the client sent a
"Modified" entry. This fixes the case where the
file was locally deleted on the client without
being removed from CVS. In this case the client
will only have sent the Entry for the file but nothing
else.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Acked-by: Martin Langhoff <martin@catalyst.net.nz>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
fsck: do not complain on detached HEAD.
Detached HEAD is just a normal state of a repository. Do not
say anything about it.
Do not give worrying "error:" messages when we let the user know
that the HEAD points at nothing (i.e. yet to be born branch),
nor we do not have any default refs to start following the
objects chain. Reword them as "notice:".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Detached HEAD is just a normal state of a repository. Do not
say anything about it.
Do not give worrying "error:" messages when we let the user know
that the HEAD points at nothing (i.e. yet to be born branch),
nor we do not have any default refs to start following the
objects chain. Reword them as "notice:".
Signed-off-by: Junio C Hamano <junkio@cox.net>
(encode_85, decode_85): Mark source buffer pointer as "const".
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation: show-ref: document --exclude-existing
Use the comment in the code to document the --exclude-existing
function to git-show-ref.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use the comment in the code to document the --exclude-existing
function to git-show-ref.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
cvsexportcommit -p : fix the usage of git-apply -C.
Unlike 'patch --fuzz=NUM', which specifies the number of lines allowed
to mismatch, 'git-apply -CNUM' requests the match of NUM lines of
context. Omitting -C requests full context match, and that's what
should be used for cvsexportcommit -p.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Unlike 'patch --fuzz=NUM', which specifies the number of lines allowed
to mismatch, 'git-apply -CNUM' requests the match of NUM lines of
context. Omitting -C requests full context match, and that's what
should be used for cvsexportcommit -p.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add Documentation/cmd-list.made to .gitignore
Noticed by Randal L. Schwartz.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Noticed by Randal L. Schwartz.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: fix log command to avoid infinite loop on long commit messages
This bug has been around since the the conversion to use the
Git.pm library back in October or November. Eventually I'd like
"git rev-list/log" to have the option to not truncate overly
long messages.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This bug has been around since the the conversion to use the
Git.pm library back in October or November. Eventually I'd like
"git rev-list/log" to have the option to not truncate overly
long messages.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: dcommit/rebase confused by patches with git-svn-id: lines
When patches are merged from another git-svn managed branch,
they will have the git-svn-id: metadata line in them (generated
by git-format-patch).
When doing rebase or dcommit via git-svn, this would cause
git-svn to find the wrong upstream branch. We now verify
that the commit is consistent with the value in the .rev_db
file.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When patches are merged from another git-svn managed branch,
they will have the git-svn-id: metadata line in them (generated
by git-format-patch).
When doing rebase or dcommit via git-svn, this would cause
git-svn to find the wrong upstream branch. We now verify
that the commit is consistent with the value in the .rev_db
file.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: bail out on incorrect command-line options
"git svn log" is the only command that needs the pass-through
option in Getopt::Long; otherwise we will bail out and let the
user know something is wrong.
Also, avoid printing out unaccepted mixed-case options (that
are reserved for the command-line) such as --useSvmProps
in the usage() function.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git svn log" is the only command that needs the pass-through
option in Getopt::Long; otherwise we will bail out and let the
user know something is wrong.
Also, avoid printing out unaccepted mixed-case options (that
are reserved for the command-line) such as --useSvmProps
in the usage() function.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Prepare for 1.5.1.1
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
cvsserver: small corrections to asciidoc documentation
Fix a typo: s/Not/Note/
Some formating fixes: Use ` ` syntax for all filenames and
' ' syntax for all commandline switches.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix a typo: s/Not/Note/
Some formating fixes: Use ` ` syntax for all filenames and
' ' syntax for all commandline switches.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation: tighten dependency for git.{html,txt}
Every time _any_ documentation page changed, cmds-*.txt files
were regenerated, which caused git.{html,txt} to be remade. Try
not to update cmds-*.txt files if their new contents match the
old ones.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Every time _any_ documentation page changed, cmds-*.txt files
were regenerated, which caused git.{html,txt} to be remade. Try
not to update cmds-*.txt files if their new contents match the
old ones.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Makefile: iconv() on Darwin has the old interface
The libiconv on Darwin uses the old iconv() interface (2nd argument is a
const char **, instead of a char **). Add OLD_ICONV to the Darwin
variable definitions to handle this.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Acked-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The libiconv on Darwin uses the old iconv() interface (2nd argument is a
const char **, instead of a char **). Add OLD_ICONV to the Darwin
variable definitions to handle this.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Acked-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
t5300-pack-object.sh: portability issue using /usr/bin/stat
In the test 'compare delta flavors', /usr/bin/stat is used to get file size.
This isn't portable. There already is a dependency on Perl, use its '-s'
operator to get the file size.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the test 'compare delta flavors', /usr/bin/stat is used to get file size.
This isn't portable. There already is a dependency on Perl, use its '-s'
operator to get the file size.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
t3200-branch.sh: small language nit
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
usermanual.txt: some capitalization nits
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make builtin-branch.c handle the git config file
This moves the knowledge about .git/config usage out of refs.c and into
builtin-branch.c instead, which allows git-branch to update HEAD to point
at the moved branch before attempting to update the config file. It also
allows git-branch to exit with an error code if updating the config file
should fail.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the knowledge about .git/config usage out of refs.c and into
builtin-branch.c instead, which allows git-branch to update HEAD to point
at the moved branch before attempting to update the config file. It also
allows git-branch to exit with an error code if updating the config file
should fail.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
rename_ref(): only print a warning when config-file update fails
If git_config_rename_section() fails, rename_ref() used to return 1, which
left HEAD pointing to an absent refs/heads file (since the actual renaming
had already occurred).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If git_config_rename_section() fails, rename_ref() used to return 1, which
left HEAD pointing to an absent refs/heads file (since the actual renaming
had already occurred).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Distinguish branches by more than case in tests.
The renaming without config test changed a branch from q to Q, which
fails on non-case sensitive file systems. Change the test to use q
and q2.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The renaming without config test changed a branch from q to Q, which
fails on non-case sensitive file systems. Change the test to use q
and q2.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Avoid composing too long "References" header.
The number of characters in a line MUST be no more than 998 characters,
and SHOULD be no more than 78 characters (RFC2822).
It is much safer to fold the header by ourselves.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The number of characters in a line MUST be no more than 998 characters,
and SHOULD be no more than 78 characters (RFC2822).
It is much safer to fold the header by ourselves.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
cvsimport: Improve formating consistency
Use ' ' syntax for all commandline options mentioned in text.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use ' ' syntax for all commandline options mentioned in text.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
cvsimport: Reorder options in documentation for better understanding
The current order the options are documented in makes no sense
at all to me. Reorder them so that similar options are grouped
together and also order them somehwhat by importance.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The current order the options are documented in makes no sense
at all to me. Reorder them so that similar options are grouped
together and also order them somehwhat by importance.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
cvsimport: Improve usage error reporting
Actually tell the user what he did wrong in case of usage errors
instead of only printing the general usage information.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Actually tell the user what he did wrong in case of usage errors
instead of only printing the general usage information.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
cvsimport: Improve documentation of CVSROOT and CVS module determination
Document the fact that git-cvsimport tries to find out CVSROOT from
CVS/Root and $ENV{CVSROOT} and CVS_module from CVS/Repository.
Also use ` ` syntax for all filenames for consistency.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document the fact that git-cvsimport tries to find out CVSROOT from
CVS/Root and $ENV{CVSROOT} and CVS_module from CVS/Repository.
Also use ` ` syntax for all filenames for consistency.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
cvsimport: sync usage lines with existing options
Sync both the usage lines in the code and the asciidoc
documentation with the real list of options. While
all options seems to be documented in the asciidoc
document, not all of them were listed in the usage line.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sync both the usage lines in the code and the asciidoc
documentation with the real list of options. While
all options seems to be documented in the asciidoc
document, not all of them were listed in the usage line.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix lseek(2) calls with args 2 and 3 swapped
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Honor -p<n> when applying git diffs
If the user is trying to apply a Git generated diff file and they
have specified a -p<n> option, where <n> is not 1, the user probably
has a good reason for doing this. Such as they are me, trying to
apply a patch generated in git.git for the git-gui subdirectory to
the git-gui.git repository, where there is no git-gui subdirectory
present.
Users shouldn't supply -p2 unless they mean it. But if they are
supplying it, they probably have thought about how to make this
patch apply to their working directory, and want to risk whatever
results may come from that.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user is trying to apply a Git generated diff file and they
have specified a -p<n> option, where <n> is not 1, the user probably
has a good reason for doing this. Such as they are me, trying to
apply a patch generated in git.git for the git-gui subdirectory to
the git-gui.git repository, where there is no git-gui subdirectory
present.
Users shouldn't supply -p2 unless they mean it. But if they are
supplying it, they probably have thought about how to make this
patch apply to their working directory, and want to risk whatever
results may come from that.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix dependency of common-cmds.h
Say $(wildcard ...) when we mean it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Say $(wildcard ...) when we mean it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix renaming branch without config file
Make git_config_rename_section return success if no config file
exists. Otherwise, renaming a branch would abort, leaving the
repository in an inconsistent state.
[jc: test]
Signed-off-by: Geert Bosch <bosch@gnat.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make git_config_rename_section return success if no config file
exists. Otherwise, renaming a branch would abort, leaving the
repository in an inconsistent state.
[jc: test]
Signed-off-by: Geert Bosch <bosch@gnat.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
DESTDIR support for git/contrib/emacs
make install DESTDIR=... support for git/contrib/emacs
Signed-off-by: Ville Skyttä <scop@xemacs.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
make install DESTDIR=... support for git/contrib/emacs
Signed-off-by: Ville Skyttä <scop@xemacs.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Fix bug in "blobdiff" view for split (e.g. file to symlink) patches
git_patchset_body needs patch generated with --full-index option to
detect split patches, meaning two patches which corresponds to single
difftree (raw diff) entry. An example of such situation is changing
type (mode) of a file, e.g. from plain file to symbolic link.
Add, in git_blobdiff, --full-index option to patch generating git diff
invocation, for the 'html' format output ("blobdiff" view).
"blobdiff_plain" still uses shortened sha1 in the extended git diff
header "index <hash>..<hash>[ <mode>]" line.
Noticed-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git_patchset_body needs patch generated with --full-index option to
detect split patches, meaning two patches which corresponds to single
difftree (raw diff) entry. An example of such situation is changing
type (mode) of a file, e.g. from plain file to symbolic link.
Add, in git_blobdiff, --full-index option to patch generating git diff
invocation, for the 'html' format output ("blobdiff" view).
"blobdiff_plain" still uses shortened sha1 in the extended git diff
header "index <hash>..<hash>[ <mode>]" line.
Noticed-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document --left-right option to rev-list.
Explanation is paraphrased from "577ed5c... rev-list --left-right"
Signed-off-by: Junio C Hamano <junkio@cox.net>
Explanation is paraphrased from "577ed5c... rev-list --left-right"
Signed-off-by: Junio C Hamano <junkio@cox.net>
Revert "builtin-archive: use RUN_SETUP"
Commit 64edf4b2 cleaned up the initialization of git-archive,
at the cost of 'git-archive --list' now requiring a git repo.
This patch reverts the cleanup and documents the requirement
for this particular dirtyness in a test.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Commit 64edf4b2 cleaned up the initialization of git-archive,
at the cost of 'git-archive --list' now requiring a git repo.
This patch reverts the cleanup and documents the requirement
for this particular dirtyness in a test.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
rename contrib/hooks/post-receieve-email to contrib/hooks/post-receive-email.
$ git grep post-receieve-email
$ git grep post-receive-email
templates/hooks--post-receive:#. /usr/share/doc/git-core/contrib/hooks/post-receive-email
$
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
$ git grep post-receieve-email
$ git grep post-receive-email
templates/hooks--post-receive:#. /usr/share/doc/git-core/contrib/hooks/post-receive-email
$
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
rerere: make sorting really stable.
The earlier code does not swap hunks when the beginning of the
first side is identical to the whole of the second side. In
such a case, the first one should sort later.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The earlier code does not swap hunks when the beginning of the
first side is identical to the whole of the second side. In
such a case, the first one should sort later.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix t4200-rerere for white-space from "wc -l"
On OS X, wc outputs 6 spaces before the number of lines, so the test
expecting the string "10" failed. Do not quote $cmd to strip away
the problematic whitespace as other tests do.
Also fix the grammar of the test name while making changes to it.
There's only one preimage, so it's "has", not "have".
Signed-off-by: Junio C Hamano <junkio@cox.net>
On OS X, wc outputs 6 spaces before the number of lines, so the test
expecting the string "10" failed. Do not quote $cmd to strip away
the problematic whitespace as other tests do.
Also fix the grammar of the test name while making changes to it.
There's only one preimage, so it's "has", not "have".
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-gui: Brown paper bag fix division by 0 in blame
If we generate a blame status string before we have obtained
any annotation data at all from the input file, or if the input
file is empty, our total_lines will be 0. This causes a division
by 0 error when we blindly divide by the 0 to compute the total
percentage of lines loaded. Instead we should report 0% done.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we generate a blame status string before we have obtained
any annotation data at all from the input file, or if the input
file is empty, our total_lines will be 0. This causes a division
by 0 error when we blindly divide by the 0 to compute the total
percentage of lines loaded. Instead we should report 0% done.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
GIT 1.5.1
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge 1.5.0.7 in
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
GIT 1.5.0.7
Not that this release really matters, as we will be doing
1.5.1 tomorrow. This commit is to tie the loose ends and
merge all of "maint" branch into "master" in preparation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not that this release really matters, as we will be doing
1.5.1 tomorrow. This commit is to tie the loose ends and
merge all of "maint" branch into "master" in preparation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation: A few minor fixes to Git User's Manual
Mainly consistent usage of "git command" and not "git-command" syntax
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mainly consistent usage of "git command" and not "git-command" syntax
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Plug memory leak in index-pack collision checking codepath.
rerere should not repeat the earlier hunks in later ones
When a file has more then one conflicting hunks, it repeated the
contents of previous hunks in output for later ones.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When a file has more then one conflicting hunks, it repeated the
contents of previous hunks in output for later ones.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Hopefully final update to the draft Release Notes, preparing for 1.5.1
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[PATCH] Improve look-and-feel of the gitk tool.
Made the default buttons on the dialog active and focused upon the
dialog appearence.
Bound 'Escape' and 'Return' keys to the dialog dismissal where it
was appropriate: mainly for dialogs with only one button and no
editable fields.
Unified the look of the "About gitk" and "Key bindings" dialogs.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Made the default buttons on the dialog active and focused upon the
dialog appearence.
Bound 'Escape' and 'Return' keys to the dialog dismissal where it
was appropriate: mainly for dialogs with only one button and no
editable fields.
Unified the look of the "About gitk" and "Key bindings" dialogs.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Signed-off-by: Paul Mackerras <paulus@samba.org>
[PATCH] Teach gitk to use the user-defined UI font everywhere.
Some parts of gitk were not respecting the default GUI font. Most
of them were catched and fixed.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Some parts of gitk were not respecting the default GUI font. Most
of them were catched and fixed.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Signed-off-by: Paul Mackerras <paulus@samba.org>
cvsserver: Don't lie about binary mode in asciidoc documentation
The git-cvsserver documentation claims that the server will set
-k modes if appropriate which is not really the case. On the other
hand the available gitcvs.allbinary variable is not documented at
all. Fix both these issues by rewording the related paragraph.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git-cvsserver documentation claims that the server will set
-k modes if appropriate which is not really the case. On the other
hand the available gitcvs.allbinary variable is not documented at
all. Fix both these issues by rewording the related paragraph.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: fail on rebase if we are unable to find a ref to rebase against
If we're on an invalid HEAD, we should detect this and avoid
attempting to continue.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If we're on an invalid HEAD, we should detect this and avoid
attempting to continue.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Keep rename/rename conflicts of intermediate merges while doing recursive merge
This patch leaves the base name in the resulting intermediate tree, to
propagate the conflict from intermediate merges up to the top-level merge.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch leaves the base name in the resulting intermediate tree, to
propagate the conflict from intermediate merges up to the top-level merge.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
contrib/workdir: add a simple script to create a working directory
Add a simple script to create a working directory that uses symlinks
to point at an exisiting repository. This allows having different
branches in different working directories but all from the same
repository.
Based on a description from Junio of how he creates multiple working
directories[1]. With the following caveat:
"This risks confusion for an uninitiated if you update a ref that
is checked out in another working tree, but modulo that caveat
it works reasonably well."
[1] http://article.gmane.org/gmane.comp.version-control.git/41513/
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a simple script to create a working directory that uses symlinks
to point at an exisiting repository. This allows having different
branches in different working directories but all from the same
repository.
Based on a description from Junio of how he creates multiple working
directories[1]. With the following caveat:
"This risks confusion for an uninitiated if you update a ref that
is checked out in another working tree, but modulo that caveat
it works reasonably well."
[1] http://article.gmane.org/gmane.comp.version-control.git/41513/
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Reimplement emailing part of hooks--update in contrib/hooks/post-receive-email
The update hook is no longer the correct place to generate emails; there
is now the hooks/post-receive script which is run automatically after a
ref has been updated.
This patch is to make use of that new location, and to address some
faults in the old update hook.
The primary problem in the conversion was that in the update hook, the
ref has not actually been changed, but is about to be. In the
post-receive hook the ref has already been updated. That meant that
where we previously had lines like:
git rev-list --not --all
would now give the wrong list because "--all" in the post-receive hook
includes the ref that we are making the email for. This made it more
difficult to show only the new revisions added by this update.
The solution is not pretty; however it does work and doesn't need any
changes to git-rev-list itself. It also fixes (more accurately: reduces
the likelihood of) a nasty race when another update occurs while this
script is running. The solution, in short, looks like this (see the
source code for a longer explanation)
git rev-parse --not --all | grep -v $(git rev-parse $refname) |
git rev-list --pretty --stdin $oldrev..$newrev
This uses git-rev-parse followed by grep to filter out the revision of
the ref in question before it gets to rev-list and inhibits the output
of itself. By using $(git rev-parse $revname) rather than $newrev as the
filter, it also takes care of the situation where another update to the
same ref has been made since $refname was $newrev.
The second problem that is addressed is that of tags inhibiting the
correct output of an update email. Consider this, with somebranch and
sometag pointing at the same revision:
git push origin somebranch
git push origin sometag
That would work fine; the push of the branch would generate an email
containing all the new commits introduced by the update, then the push
of the tag would generate the shortlog formatted tag email. Now
consider:
git push origin sometag
git push origin somebranch
When some branch comes to run its "--not --all" line, it will find
sometag, and filter those commits from the email - leaving nothing.
That meant that those commits would not show (in full) on any email.
The fix is to not use "--all", and instead use "--branches" in the
git-rev-parse command.
Other changes
* Lose the monstrous one-giant-script layout and put things in easy to
digest functions. This makes it much easier to find the place you
need to change if you wanted to customise the output. I've also
tried to write more verbose comments for the same reason. The hook
script is big, mainly because of all the different cases that it has
to handle, so being easy to navigate is important.
* All uses of "git-command" changed to "git command", to cope better
if a user decided not to install all the hard links to git;
* Cleaned up some of the English in the email
* The fact that the receive hook makes the ref available also allows me
to use Shawn Pearce's fantastic suggestion that an annotated tag can
be parsed with git-for-each-ref. This removes the potentially
non-portable use of "<<<" heredocs and the nasty messing around with
"date" to convert numbers of seconds UTC to a real date
* Deletions are now caught and notified (briefly)
* To help with debugging, I've retained the command line mode from the
update hook; but made it so that the output is not emailed, it's just
printed to the screen. This could then be redirected if the user
wanted
* Removed the "Hello" from the beginning of the email - it's just
noise, and no one seriously has their day made happier by "friendly"
programs
* The fact that it doesn't rely on repository state as an indicator any
more means that it's far more stable in its output; hopefully the
same arguments will always generate the same email - even if the
repository changes in the future. This means you can easily recreate
an email should you want to.
* Included Jim Meyering's envelope sender option for the sendmail call
* The hook is now so big that it was inappropriate to copy it
to every repository by keeping it in the templates directory.
Instead, I've put a comment saying to look in contrib/hooks, and
given an example of calling the script from that template hook. The
advantage of calling the script residing at some fixed location is
that if a future package of git included a bug fixed version of the
script, that would be picked up automatically, and the user would not
have to notice and manually copy the new hook to every repository
that uses it.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The update hook is no longer the correct place to generate emails; there
is now the hooks/post-receive script which is run automatically after a
ref has been updated.
This patch is to make use of that new location, and to address some
faults in the old update hook.
The primary problem in the conversion was that in the update hook, the
ref has not actually been changed, but is about to be. In the
post-receive hook the ref has already been updated. That meant that
where we previously had lines like:
git rev-list --not --all
would now give the wrong list because "--all" in the post-receive hook
includes the ref that we are making the email for. This made it more
difficult to show only the new revisions added by this update.
The solution is not pretty; however it does work and doesn't need any
changes to git-rev-list itself. It also fixes (more accurately: reduces
the likelihood of) a nasty race when another update occurs while this
script is running. The solution, in short, looks like this (see the
source code for a longer explanation)
git rev-parse --not --all | grep -v $(git rev-parse $refname) |
git rev-list --pretty --stdin $oldrev..$newrev
This uses git-rev-parse followed by grep to filter out the revision of
the ref in question before it gets to rev-list and inhibits the output
of itself. By using $(git rev-parse $revname) rather than $newrev as the
filter, it also takes care of the situation where another update to the
same ref has been made since $refname was $newrev.
The second problem that is addressed is that of tags inhibiting the
correct output of an update email. Consider this, with somebranch and
sometag pointing at the same revision:
git push origin somebranch
git push origin sometag
That would work fine; the push of the branch would generate an email
containing all the new commits introduced by the update, then the push
of the tag would generate the shortlog formatted tag email. Now
consider:
git push origin sometag
git push origin somebranch
When some branch comes to run its "--not --all" line, it will find
sometag, and filter those commits from the email - leaving nothing.
That meant that those commits would not show (in full) on any email.
The fix is to not use "--all", and instead use "--branches" in the
git-rev-parse command.
Other changes
* Lose the monstrous one-giant-script layout and put things in easy to
digest functions. This makes it much easier to find the place you
need to change if you wanted to customise the output. I've also
tried to write more verbose comments for the same reason. The hook
script is big, mainly because of all the different cases that it has
to handle, so being easy to navigate is important.
* All uses of "git-command" changed to "git command", to cope better
if a user decided not to install all the hard links to git;
* Cleaned up some of the English in the email
* The fact that the receive hook makes the ref available also allows me
to use Shawn Pearce's fantastic suggestion that an annotated tag can
be parsed with git-for-each-ref. This removes the potentially
non-portable use of "<<<" heredocs and the nasty messing around with
"date" to convert numbers of seconds UTC to a real date
* Deletions are now caught and notified (briefly)
* To help with debugging, I've retained the command line mode from the
update hook; but made it so that the output is not emailed, it's just
printed to the screen. This could then be redirected if the user
wanted
* Removed the "Hello" from the beginning of the email - it's just
noise, and no one seriously has their day made happier by "friendly"
programs
* The fact that it doesn't rely on repository state as an indicator any
more means that it's far more stable in its output; hopefully the
same arguments will always generate the same email - even if the
repository changes in the future. This means you can easily recreate
an email should you want to.
* Included Jim Meyering's envelope sender option for the sendmail call
* The hook is now so big that it was inappropriate to copy it
to every repository by keeping it in the templates directory.
Instead, I've put a comment saying to look in contrib/hooks, and
given an example of calling the script from that template hook. The
advantage of calling the script residing at some fixed location is
that if a future package of git included a bug fixed version of the
script, that would be picked up automatically, and the user would not
have to notice and manually copy the new hook to every repository
that uses it.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: avoid respewing similar error messages for missing paths
We ignore errors if the path we're tracking did not exist for
a particular revision range, but we still print out warnings
telling the user about that.
As pointed out by Seth Falcon, this amounts to a lot of warnings
that could confuse and worry users. I'm not entirely comfortable
completely silencing the warnings, but showing one warning per
path that we track should be reasonable.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We ignore errors if the path we're tracking did not exist for
a particular revision range, but we still print out warnings
telling the user about that.
As pointed out by Seth Falcon, this amounts to a lot of warnings
that could confuse and worry users. I'm not entirely comfortable
completely silencing the warnings, but showing one warning per
path that we track should be reasonable.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Rename warn() to warning() to fix symbol conflicts on BSD and Mac OS
This fixes a problem reported by Randal Schwartz:
>I finally tracked down all the (albeit inconsequential) errors I was getting
>on both OpenBSD and OSX. It's the warn() function in usage.c. There's
>warn(3) in BSD-style distros. It'd take a "great rename" to change it, but if
>someone with better C skills than I have could do that, my linker and I would
>appreciate it.
It was annoying to me, too, when I was doing some mergetool testing on
Mac OS X, so here's a fix.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: "Randal L. Schwartz" <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes a problem reported by Randal Schwartz:
>I finally tracked down all the (albeit inconsequential) errors I was getting
>on both OpenBSD and OSX. It's the warn() function in usage.c. There's
>warn(3) in BSD-style distros. It'd take a "great rename" to change it, but if
>someone with better C skills than I have could do that, my linker and I would
>appreciate it.
It was annoying to me, too, when I was doing some mergetool testing on
Mac OS X, so here's a fix.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: "Randal L. Schwartz" <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-mailinfo fixes for patch munging
Don't translate the patch to UTF-8, instead preserve the data as
is. This also reverts a test case that was included in the
original patch series.
Also allow overwriting the authorship and title information we
gather from RFC2822 mail headers with additional in-body
headers, which was pointed out by Linus.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Don't translate the patch to UTF-8, instead preserve the data as
is. This also reverts a test case that was included in the
original patch series.
Also allow overwriting the authorship and title information we
gather from RFC2822 mail headers with additional in-body
headers, which was pointed out by Linus.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Support comparing blobs (files) with different names
Fix the bug that caused "blobdiff" view called with new style URI
for a rename with change diff to be show as new (added) file diff.
New style URI for "blobdiff" for rename means with $hash_base ('hb') and
$hash_parent_base ('hpb') paramaters denoting tree-ish (usually commit)
of a blobs being compared, together with both $file_name ('f') and
$file_parent ('fp') parameters.
It is done by adding $file_parent ('fp') to the path limiter, meaning
that diff command becomes:
git diff-tree [options] hpb hb -- fp f
Other option would be finding hash of a blob using git_get_hash_by_path
subroutine and comparing blobs using git-diff, or using extended SHA-1
syntax and compare blobs using git-diff:
git diff [options] hpb:fp hp:f
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix the bug that caused "blobdiff" view called with new style URI
for a rename with change diff to be show as new (added) file diff.
New style URI for "blobdiff" for rename means with $hash_base ('hb') and
$hash_parent_base ('hpb') paramaters denoting tree-ish (usually commit)
of a blobs being compared, together with both $file_name ('f') and
$file_parent ('fp') parameters.
It is done by adding $file_parent ('fp') to the path limiter, meaning
that diff command becomes:
git diff-tree [options] hpb hb -- fp f
Other option would be finding hash of a blob using git_get_hash_by_path
subroutine and comparing blobs using git-diff, or using extended SHA-1
syntax and compare blobs using git-diff:
git diff [options] hpb:fp hp:f
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Do not bother documenting fetch--tool
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update draft release notes for 1.5.1
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>