Code

git.git
17 years agofilter-branch: always export GIT_DIR if it is set
Matthias Lederhofer [Wed, 6 Jun 2007 07:16:56 +0000 (09:16 +0200)]
filter-branch: always export GIT_DIR if it is set

Currently filter-branch exports GIT_DIR only if it is an
relative path but git-sh-setup might also set GIT_DIR to an
absolute path that is not exported yet.  Additionally export
GIT_WORK_TREE with GIT_DIR to ensure that cwd is used as
working tree even for bare repositories.

Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agoMerge branch 'js/filter' into ei/worktree+filter
Junio C Hamano [Wed, 6 Jun 2007 23:08:34 +0000 (16:08 -0700)]
Merge branch 'js/filter' into ei/worktree+filter

* js/filter:
  filter-branch: also don't fail in map() if a commit cannot be mapped
  filter-branch: Use rev-list arguments to specify revision ranges.
  filter-branch: fix behaviour of '-k'
  filter-branch: use $(($i+1)) instead of $((i+1))
  chmod +x git-filter-branch.sh
  filter-branch: prevent filters from reading from stdin
  t7003: make test repeatable
  Add git-filter-branch

17 years agosetup_git_directory: fix segfault if repository is found in cwd
Matthias Lederhofer [Wed, 6 Jun 2007 21:29:59 +0000 (23:29 +0200)]
setup_git_directory: fix segfault if repository is found in cwd

Additionally there was a similar part calling setenv and getenv
in the same way which missed a check if getenv succeeded.

Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agotest GIT_WORK_TREE
Matthias Lederhofer [Wed, 6 Jun 2007 07:14:25 +0000 (09:14 +0200)]
test GIT_WORK_TREE

Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agoextend rev-parse test for --is-inside-work-tree
Matthias Lederhofer [Wed, 6 Jun 2007 07:13:26 +0000 (09:13 +0200)]
extend rev-parse test for --is-inside-work-tree

Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agoUse new semantics of is_bare/inside_git_dir/inside_work_tree
Matthias Lederhofer [Sun, 3 Jun 2007 14:48:16 +0000 (16:48 +0200)]
Use new semantics of is_bare/inside_git_dir/inside_work_tree

Up to now to check for a working tree this was used:
!is_bare && !inside_git_dir
(the check for bare is redundant because is_inside_git_dir
returned already 1 for bare repositories).
Now the check is:
inside_work_tree && !inside_git_dir

Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agointroduce GIT_WORK_TREE to specify the work tree
Matthias Lederhofer [Wed, 6 Jun 2007 07:10:42 +0000 (09:10 +0200)]
introduce GIT_WORK_TREE to specify the work tree

setup_gdg is used as abbreviation for setup_git_directory_gently.

The work tree can be specified using the environment variable
GIT_WORK_TREE and the config option core.worktree (the environment
variable has precendence over the config option).  Additionally
there is a command line option --work-tree which sets the
environment variable.

setup_gdg does the following now:

GIT_DIR unspecified
repository in .git directory
    parent directory of the .git directory is used as work tree,
    GIT_WORK_TREE is ignored

GIT_DIR unspecified
repository in cwd
    GIT_DIR is set to cwd
    see the cases with GIT_DIR specified what happens next and
    also see the note below

GIT_DIR specified
GIT_WORK_TREE/core.worktree unspecified
    cwd is used as work tree

GIT_DIR specified
GIT_WORK_TREE/core.worktree specified
    the specified work tree is used

Note on the case where GIT_DIR is unspecified and repository is in cwd:
    GIT_WORK_TREE is used but is_inside_git_dir is always true.
    I did it this way because setup_gdg might be called multiple
    times (e.g. when doing alias expansion) and in successive calls
    setup_gdg should do the same thing every time.

Meaning of is_bare/is_inside_work_tree/is_inside_git_dir:

(1) is_bare_repository
    A repository is bare if core.bare is true or core.bare is
    unspecified and the name suggests it is bare (directory not
    named .git).  The bare option disables a few protective
    checks which are useful with a working tree.  Currently
    this changes if a repository is bare:
        updates of HEAD are allowed
        git gc packs the refs
        the reflog is disabled by default

(2) is_inside_work_tree
    True if the cwd is inside the associated working tree (if there
    is one), false otherwise.

(3) is_inside_git_dir
    True if the cwd is inside the git directory, false otherwise.
    Before this patch is_inside_git_dir was always true for bare
    repositories.

When setup_gdg finds a repository git_config(git_default_config) is
always called.  This ensure that is_bare_repository makes use of
core.bare and does not guess even though core.bare is specified.

inside_work_tree and inside_git_dir are set if setup_gdg finds a
repository.  The is_inside_work_tree and is_inside_git_dir functions
will die if they are called before a successful call to setup_gdg.

Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agotest git rev-parse
Matthias Lederhofer [Wed, 6 Jun 2007 07:01:21 +0000 (09:01 +0200)]
test git rev-parse

Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agorev-parse: introduce --is-bare-repository
Matthias Lederhofer [Sun, 3 Jun 2007 14:46:36 +0000 (16:46 +0200)]
rev-parse: introduce --is-bare-repository

Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agorev-parse: document --is-inside-git-dir
Matthias Lederhofer [Sun, 3 Jun 2007 14:46:04 +0000 (16:46 +0200)]
rev-parse: document --is-inside-git-dir

Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agoMerge branch 'sv/objfixes'
Junio C Hamano [Wed, 6 Jun 2007 22:43:24 +0000 (15:43 -0700)]
Merge branch 'sv/objfixes'

* sv/objfixes:
  Don't assume tree entries that are not dirs are blobs
  git-cvsimport: Make sure to use $git_dir always instead of .git sometimes
  fix documentation of unpack-objects -n
  Accept dates before 2000/01/01 when specified as seconds since the epoch

17 years agoDon't assume tree entries that are not dirs are blobs
Sam Vilain [Wed, 6 Jun 2007 10:25:17 +0000 (22:25 +1200)]
Don't assume tree entries that are not dirs are blobs

When scanning the trees in track_tree_refs() there is a "lazy" test
that assumes that entries are either directories or files.  Don't do
that.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agogit-cvsimport: Make sure to use $git_dir always instead of .git sometimes
Michael Milligan [Tue, 5 Jun 2007 06:06:30 +0000 (00:06 -0600)]
git-cvsimport: Make sure to use $git_dir always instead of .git sometimes

CVS import was failing on a couple repos I was trying to import.
I was setting GIT_DIR=newproj.git and using the -i flag, but this bug
was thwarting the effort...  evil CVS.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agofix documentation of unpack-objects -n
Sam Vilain [Wed, 6 Jun 2007 21:23:16 +0000 (09:23 +1200)]
fix documentation of unpack-objects -n

unpack-objects -n didn't print the object list as promised on the
manual page, so alter the documentation to reflect the behaviour

Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agoAccept dates before 2000/01/01 when specified as seconds since the epoch
Johannes Sixt [Wed, 6 Jun 2007 08:11:55 +0000 (10:11 +0200)]
Accept dates before 2000/01/01 when specified as seconds since the epoch

Tests with git-filter-branch on a repository that was converted from
CVS and that has commits reaching back to 1999 revealed that it is
necessary to parse dates before 2000/01/01 when they are specified
as seconds since 1970/01/01. There is now still a limit, 100000000,
which is 1973/03/03 09:46:40 UTC, in order to allow that dates are
represented as 8 digits.

Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agoMakefile: Remove git-merge-base from PROGRAMS.
Johannes Sixt [Mon, 4 Jun 2007 11:53:05 +0000 (13:53 +0200)]
Makefile: Remove git-merge-base from PROGRAMS.

git-merge-base is a builtin.

Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agot5000: skip ZIP tests if unzip was not found
Johannes Schindelin [Wed, 6 Jun 2007 18:57:40 +0000 (19:57 +0100)]
t5000: skip ZIP tests if unzip was not found

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agofilter-branch: also don't fail in map() if a commit cannot be mapped
Johannes Sixt [Wed, 6 Jun 2007 18:38:35 +0000 (20:38 +0200)]
filter-branch: also don't fail in map() if a commit cannot be mapped

The map() function can be used by filters to map a commit id to its
rewritten id. Such a mapping may not exist, in which case the identity
mapping is used (the commit is returned unchanged).

In the rewrite loop, this mapping is also needed, but was done
explicitly in the same way. Use the map() function instead.

Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agofilter-branch: Use rev-list arguments to specify revision ranges.
Johannes Sixt [Wed, 6 Jun 2007 07:43:41 +0000 (09:43 +0200)]
filter-branch: Use rev-list arguments to specify revision ranges.

A subset of commits in a branch used to be specified by options (-k, -r)
as well as the branch tip itself (-s). It is more natural (for git users)
to specify revision ranges like 'master..next' instead. This makes it so.
If no range is specified it defaults to 'HEAD'.

As a consequence, the new name of the filtered branch must be the first
non-option argument. All remaining arguments are passed to 'git rev-list'
unmodified.

The tip of the branch that gets filtered is implied: It is the first
commit that git rev-list would print for the specified range.

Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agofilter-branch: fix behaviour of '-k'
Johannes Schindelin [Tue, 5 Jun 2007 15:58:13 +0000 (16:58 +0100)]
filter-branch: fix behaviour of '-k'

The option '-k' says that the given commit and _all_ of its ancestors
are kept as-is.

However, if a to-be-rewritten commit branched from an ancestor of an
ancestor of a commit given with '-k', filter-branch would fail.

Example:

A - B
  \
    C

If filter-branch was called with '-k B -s C', it would actually keep
B (and A as its parent), but would rewrite C, and its parent.

Noticed by Johannes Sixt.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agofilter-branch: use $(($i+1)) instead of $((i+1))
Johannes Schindelin [Wed, 6 Jun 2007 15:24:07 +0000 (16:24 +0100)]
filter-branch: use $(($i+1)) instead of $((i+1))

The expression $((i+1)) is not portable at all: even some bash versions
do not grok it. So do not use it.

Noticed by Jonas Fonseca.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agoMerge branch 'mm/tag'
Junio C Hamano [Wed, 6 Jun 2007 09:29:41 +0000 (02:29 -0700)]
Merge branch 'mm/tag'

* mm/tag:
  Teach git-tag about showing tag annotations.

17 years agochmod +x git-filter-branch.sh
Matthias Lederhofer [Wed, 6 Jun 2007 07:29:39 +0000 (09:29 +0200)]
chmod +x git-filter-branch.sh

Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agogit-branch --track: fix tracking branch computation.
Junio C Hamano [Wed, 6 Jun 2007 08:10:14 +0000 (01:10 -0700)]
git-branch --track: fix tracking branch computation.

The original code did not take hierarchical branch names into account at all.

Tested-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agoFix typo in git-mergetool
Josh Triplett [Wed, 6 Jun 2007 04:24:19 +0000 (21:24 -0700)]
Fix typo in git-mergetool

Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agoAdd the --numbered-files option to git-format-patch.
Jon Loeliger [Tue, 5 Jun 2007 20:06:53 +0000 (15:06 -0500)]
Add the --numbered-files option to git-format-patch.

With this option, git-format-patch will generate simple
numbered files as output instead of the default using
with the first commit line appended.

This simplifies the ability to generate an MH-style
drafts folder with each message to be sent.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years ago$EMAIL is a last resort fallback, as it's system-wide.
Pierre Habouzit [Tue, 5 Jun 2007 16:40:41 +0000 (18:40 +0200)]
$EMAIL is a last resort fallback, as it's system-wide.

$EMAIL is a system-wide setup that is used for many many many
applications. If the git user chose a specific user.email setup,
then _this_ should be honoured rather than $EMAIL.

Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agofilter-branch: prevent filters from reading from stdin
Matthias Lederhofer [Tue, 5 Jun 2007 14:12:08 +0000 (16:12 +0200)]
filter-branch: prevent filters from reading from stdin

stdin is the list of commits when the env, tree and index
filter are executed.  The filters are not supposed to read
anything from stdin so the best is to give them /dev/null
for reading.

Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agomake clean should remove all the test programs too
Matthias Lederhofer [Tue, 5 Jun 2007 13:43:17 +0000 (15:43 +0200)]
make clean should remove all the test programs too

Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agoadd git-filter-branch to .gitignore
Matthias Lederhofer [Tue, 5 Jun 2007 13:26:12 +0000 (15:26 +0200)]
add git-filter-branch to .gitignore

Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agoMerge branch 'gb/idx'
Junio C Hamano [Wed, 6 Jun 2007 04:36:51 +0000 (21:36 -0700)]
Merge branch 'gb/idx'

* gb/idx:
  Unify write_index_file functions

17 years agot7003: make test repeatable
Junio C Hamano [Tue, 5 Jun 2007 07:07:31 +0000 (00:07 -0700)]
t7003: make test repeatable

Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agomerge-recursive: refuse to merge binary files
Johannes Schindelin [Tue, 5 Jun 2007 02:36:49 +0000 (03:36 +0100)]
merge-recursive: refuse to merge binary files

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agoMove buffer_is_binary() to xdiff-interface.h
Johannes Schindelin [Tue, 5 Jun 2007 02:36:11 +0000 (03:36 +0100)]
Move buffer_is_binary() to xdiff-interface.h

We already have two instances where we want to determine if a buffer
contains binary data as opposed to text.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agogit-fsck: learn about --verbose
Johannes Schindelin [Tue, 5 Jun 2007 02:44:00 +0000 (03:44 +0100)]
git-fsck: learn about --verbose

With --verbose, it gets really chatty now.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agogitweb: Handle non UTF-8 text better
Martin Koegler [Sun, 3 Jun 2007 15:42:44 +0000 (17:42 +0200)]
gitweb: Handle non UTF-8 text better

gitweb assumes that everything is in UTF-8. If a text contains invalid
UTF-8 character sequences, the text must be in a different encoding.

This commit introduces $fallback_encoding which would be used as input
encoding if gitweb encounters text with is not valid UTF-8.

Add basic test for this in t/t9500-gitweb-standalone-no-errors.sh

Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Tested-by: Alexandre Julliard <julliard@winehq.org>
Tested-by: Ismail Dönmez <ismail@pardus.org.tr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agoAdd test-sha1 to .gitignore.
Randal L. Schwartz [Sun, 3 Jun 2007 15:27:52 +0000 (08:27 -0700)]
Add test-sha1 to .gitignore.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
17 years agoTeach git-tag about showing tag annotations.
Matthijs Melchior [Sun, 3 Jun 2007 00:05:39 +0000 (02:05 +0200)]
Teach git-tag about showing tag annotations.

The <pattern> for -l is now a shell pattern, not a list of grep parameters.
Option -l may be repeated with another <pattern>.

The new -n [<num>] option specifies how many lines from
the annotation are to be printed.
Not specifieing -n or -n 0 will just produce the tag names
Just -n or -n 1 will show the first line of the annotation on
the tag line.
Other valuse for -n will show that number of lines from the annotation.

The exit code used to indicate if any tag was found.
This is changed due to a different implementation.

A good way to test a tag for existence is to use:
git show-ref --quiet --verify refs/tags/$TAGNAME

Signed-off-by: Matthijs Melchior <mmelchior@xs4all.nl>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoAdd git-filter-branch
Johannes Schindelin [Sun, 3 Jun 2007 00:31:28 +0000 (01:31 +0100)]
Add git-filter-branch

This script is derived from Pasky's cg-admin-rewritehist.

In fact, it _is_ the same script, minimally adapted to work without cogito.
It _should_ be able to perform the same tasks, even if only relying on
core-git programs.

All the work is Pasky's, just the adaption is mine.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Hopefully-signed-off-by: Petr "cogito master" Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agogit-apply: what is detected and fixed is not just trailing spaces.
Junio C Hamano [Sun, 3 Jun 2007 02:55:54 +0000 (19:55 -0700)]
git-apply: what is detected and fixed is not just trailing spaces.

But we kept saying "trailing whitespace" all the same.  Reword the
error messages a bit.

Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoUpdate to SubmittingPatches
Johannes Schindelin [Sun, 3 Jun 2007 00:46:47 +0000 (01:46 +0100)]
Update to SubmittingPatches

Make people aware of our testsuite, and of non-ASCII encodings.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoMerge branch 'maint' to sync with 1.5.2.1
Junio C Hamano [Sun, 3 Jun 2007 02:36:20 +0000 (19:36 -0700)]
Merge branch 'maint' to sync with 1.5.2.1

17 years agoRelease Notes: start preparing for 1.5.3
Junio C Hamano [Sun, 3 Jun 2007 02:32:48 +0000 (19:32 -0700)]
Release Notes: start preparing for 1.5.3

Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoMerge branches 'lh/submodules' and 'pb/am'
Junio C Hamano [Sun, 3 Jun 2007 02:04:54 +0000 (19:04 -0700)]
Merge branches 'lh/submodules' and 'pb/am'

* lh/submodules:
  Add basic test-script for git-submodule
  Add git-submodule command

* pb/am:
  Remove git-applypatch
  git-applymbox: Remove command

17 years agoGIT 1.5.2.1 v1.5.2.1
Junio C Hamano [Sat, 2 Jun 2007 22:01:33 +0000 (15:01 -0700)]
GIT 1.5.2.1

Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoUnify write_index_file functions
Geert Bosch [Fri, 1 Jun 2007 19:18:05 +0000 (15:18 -0400)]
Unify write_index_file functions

This patch unifies the write_index_file functions in
builtin-pack-objects.c and index-pack.c.  As the name
"index" is overloaded in git, move in the direction of
using "idx" and "pack idx" when refering to the pack index.
There should be no change in functionality.

Signed-off-by: Geert Bosch <bosch@gnat.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoAdd basic test-script for git-submodule
Lars Hjemli [Sat, 2 Jun 2007 01:27:42 +0000 (03:27 +0200)]
Add basic test-script for git-submodule

This test tries to verify basic sanity of git-submodule, i.e. that it is
able to clone and update a submodule repository, that its status output is
sane, and that it barfs when the submodule path is occupied during init.

Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoMerge branch 'np/pack'
Junio C Hamano [Sat, 2 Jun 2007 19:18:56 +0000 (12:18 -0700)]
Merge branch 'np/pack'

* np/pack:
  fix repack with --max-pack-size
  builtin-pack-object: cache small deltas
  git-pack-objects: cache small deltas between big objects
  builtin-pack-objects: don't fail, if delta is not possible

17 years agoMerge branch 'sp/pack'
Junio C Hamano [Sat, 2 Jun 2007 19:18:51 +0000 (12:18 -0700)]
Merge branch 'sp/pack'

* sp/pack:
  Style nit - don't put space after function names
  Ensure the pack index is opened before access
  Simplify index access condition in count-objects, pack-redundant
  Test for recent rev-parse $abbrev_sha1 regression
  rev-parse: Identify short sha1 sums correctly.
  Attempt to delay prepare_alt_odb during get_sha1
  Micro-optimize prepare_alt_odb
  Lazily open pack index files on demand

17 years agogit-rebase: suggest to use git-add instead of git-update-index
Jonas Fonseca [Sat, 2 Jun 2007 17:59:49 +0000 (19:59 +0200)]
git-rebase: suggest to use git-add instead of git-update-index

The command is part of the main porcelain making git-add more
appropriate.

Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoMerge branch 'maint'
Junio C Hamano [Sat, 2 Jun 2007 19:05:08 +0000 (12:05 -0700)]
Merge branch 'maint'

* maint:
  Use =20 when rfc2047 encoding spaces.
  Create a new manpage for the gitignore format, and reference it elsewhere
  Documentation: robustify asciidoc GIT_VERSION replacement

17 years agoUse =20 when rfc2047 encoding spaces.
Kristian Høgsberg [Fri, 1 Jun 2007 21:08:12 +0000 (17:08 -0400)]
Use =20 when rfc2047 encoding spaces.

Encode ' ' using '=20' even though rfc2047 allows using '_' for
readability.  Unfortunately, many programs do not understand this and
just leave the underscore in place.  Using '=20' seems to work better.

[jc: with adjustment to t3901]

Signed-off-by: Kristian Høgsberg <hoegsberg@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoCreate a new manpage for the gitignore format, and reference it elsewhere
Josh Triplett [Sat, 2 Jun 2007 17:08:54 +0000 (10:08 -0700)]
Create a new manpage for the gitignore format, and reference it elsewhere

Only git-ls-files(1) describes the gitignore format in detail, and it does so
with reference to git-ls-files options.  Most users don't use the plumbing
command git-ls-files directly, and shouldn't have to look in its manpage for
information on the gitignore format.

Create a new manpage gitignore(5) (Documentation/gitignore.txt), and factor
out the gitignore documentation into that file, changing it to refer to
.gitignore and $GIT_DIR/info/exclude as used by porcelain commands.  Reference
gitignore(5) from other relevant manpages and documentation.  Remove
now-redundant information on exclude patterns from git-ls-files(1), leaving
only information on how git-ls-files options specify exclude patterns and what
precedence they have.

Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoDocumentation: robustify asciidoc GIT_VERSION replacement
Jeff King [Fri, 1 Jun 2007 09:10:30 +0000 (05:10 -0400)]
Documentation: robustify asciidoc GIT_VERSION replacement

Instead of using sed on the resulting file, we now have a
git_version asciidoc attribute. This means that we don't
pipe the output of asciidoc, which means we can detect build
failures.

Problem reported by Scott Lamb, solution suggested by Jonas Fonseca.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoFix git-am(1) synopsis formatting
Jonas Fonseca [Sat, 2 Jun 2007 17:56:44 +0000 (19:56 +0200)]
Fix git-am(1) synopsis formatting

Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoFix minor grammatical typos in the git-gc man page
Theodore Ts'o [Thu, 31 May 2007 23:00:48 +0000 (19:00 -0400)]
Fix minor grammatical typos in the git-gc man page

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agodiff-delta: use realloc instead of xrealloc
Martin Koegler [Tue, 29 May 2007 19:08:35 +0000 (21:08 +0200)]
diff-delta: use realloc instead of xrealloc

Commit 83572c1a914d3f7a8dd66d954c11bbc665b7b923 changed many
realloc to xrealloc. This change was made in diff-delta.c too,
although the code can handle an out of memory failure.

This patch reverts this change in diff-delta.c.

Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoMerge branch 'maint'
Junio C Hamano [Thu, 31 May 2007 07:15:14 +0000 (00:15 -0700)]
Merge branch 'maint'

* maint:
  git-config: Improve documentation of git-config file handling
  git-config: Various small fixes to asciidoc documentation
  decode_85(): fix missing return.
  fix signed range problems with hex conversions

17 years agoMerge branch 'maint-1.5.1' into maint
Junio C Hamano [Thu, 31 May 2007 07:09:26 +0000 (00:09 -0700)]
Merge branch 'maint-1.5.1' into maint

* maint-1.5.1:
  git-config: Improve documentation of git-config file handling
  git-config: Various small fixes to asciidoc documentation
  decode_85(): fix missing return.
  fix signed range problems with hex conversions

17 years agogit-config: Improve documentation of git-config file handling
Frank Lichtenheld [Thu, 31 May 2007 00:35:37 +0000 (02:35 +0200)]
git-config: Improve documentation of git-config file handling

The description which files git-config uses and how the various
command line options and environment variables affect its
behaviour was incomplete, outdated and confusing.

Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agogit-config: Various small fixes to asciidoc documentation
Frank Lichtenheld [Thu, 31 May 2007 00:35:36 +0000 (02:35 +0200)]
git-config: Various small fixes to asciidoc documentation

Add '' around the only mentioned commandline option that didn't
have it.

Make reference to section EXAMPLE a link and rename it to
EXAMPLES because it actually contains a lot of examples.

Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoalways start looking up objects in the last used pack first
Nicolas Pitre [Thu, 31 May 2007 02:48:13 +0000 (22:48 -0400)]
always start looking up objects in the last used pack first

Jon Smirl said:

| Once an object reference hits a pack file it is very likely that
| following references will hit the same pack file. So first place to
| look for an object is the same place the previous object was found.

This is indeed a good heuristic so here it is.  The search always start
with the pack where the last object lookup succeeded.  If the wanted
object is not available there then the search continues with the normal
pack ordering.

To test this I split the Linux repository into 66 packs and performed a
"time git-rev-list --objects --all > /dev/null".  Best results are as
follows:

Pack Sort w/o this patch w/ this patch
-------------------------------------------------------------
recent objects last 26.4s 20.9s
recent objects first 24.9s 18.4s

This shows that the pack order based on object age has some influence,
but that the last-used-pack heuristic is even more significant in
reducing object lookup.

Signed-off-by: Nicolas Pitre <nico@cam.org> --- Note: the
--max-pack-size to git-repack currently produces packs with old objects
after those containing recent objects.  The pack sort based on
filesystem timestamp is therefore backward for those.  This needs to be
fixed of course, but at least it made me think about this variable for
the test.
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agofix repack with --max-pack-size
Nicolas Pitre [Thu, 31 May 2007 01:43:12 +0000 (21:43 -0400)]
fix repack with --max-pack-size

Two issues here:

1) git-repack -a --max-pack-size=10 on the GIT repo dies pretty quick.
   There is a lot of confusion about deltas that were suposed to be
   reused from another pack but that get stored undeltified due to pack
   limit and object size doesn't match entry->size anymore.  This test
   is not really worth the complexity for determining when it is valid
   so get rid of it.

2) If pack limit is reached, the object buffer is freed, including when
   it comes from a cached delta data.  In practice the object will be
   stored in a subsequent pack undeltified, but let's make sure no
   pointer to freed data subsists by clearing entry->delta_data.

I also reorganized that code a bit to make it more readable.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoMakefile: Use generic rule to build test programs
Julian Phillips [Wed, 30 May 2007 23:18:24 +0000 (00:18 +0100)]
Makefile: Use generic rule to build test programs

Use a generic make rule to build all the test programs, rather than
specifically mentioning each one.

Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agodecode_85(): fix missing return.
Jerald Fitzjerald [Wed, 30 May 2007 12:39:58 +0000 (05:39 -0700)]
decode_85(): fix missing return.

When the function detected an invalid base85 sequence, it issued
an error message but forgot to return error status at that point
and kept going.

Signed-off-by: Jerald Fitzjerald <jfj@freemail.gr>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agofix signed range problems with hex conversions
Linus Torvalds [Wed, 30 May 2007 17:32:19 +0000 (10:32 -0700)]
fix signed range problems with hex conversions

Make hexval_table[] "const".  Also make sure that the accessor
function hexval() does not access the table with out-of-range
values by declaring its parameter "unsigned char", instead of
"unsigned int".

With this, gcc can just generate:

movzbl  (%rdi), %eax
movsbl  hexval_table(%rax),%edx
movzbl  1(%rdi), %eax
movsbl  hexval_table(%rax),%eax
sall    $4, %edx
orl     %eax, %edx

for the code to generate a byte from two hex characters.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoAdd DLH to .mailmap
Junio C Hamano [Wed, 30 May 2007 00:55:47 +0000 (17:55 -0700)]
Add DLH to .mailmap

... and make the entries sorted.

17 years agoStyle nit - don't put space after function names
Shawn O. Pearce [Wed, 30 May 2007 06:13:42 +0000 (02:13 -0400)]
Style nit - don't put space after function names

Our style is to not put a space after a function name.  I did here,
and Junio applied the patch with the incorrect formatting.  So I'm
cleaning up after myself since I noticed it upon review.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoEnsure the pack index is opened before access
Shawn O. Pearce [Wed, 30 May 2007 06:13:14 +0000 (02:13 -0400)]
Ensure the pack index is opened before access

In this particular location of fsck the index should have already
been opened by verify_pack, which is called just before we get
here and loop through the object names.  However, just in case a
future version of that function does not use the index file we'll
double-check its open before we access the num_objects field.

Better safe now than sorry later.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoSimplify index access condition in count-objects, pack-redundant
Shawn O. Pearce [Wed, 30 May 2007 06:12:28 +0000 (02:12 -0400)]
Simplify index access condition in count-objects, pack-redundant

My earlier lazy index opening patch changed this condition to check
index_data and call open_pack_index if it was NULL. In truth we only
care about num_objects.  Since open_pack_index does no harm if the
index is already open, and all indexes are likely to be closed in
this application, the "performance optimization" of inlining the
index_data check here was wrong.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoTest for recent rev-parse $abbrev_sha1 regression
Shawn O. Pearce [Wed, 30 May 2007 04:50:26 +0000 (00:50 -0400)]
Test for recent rev-parse $abbrev_sha1 regression

My recent patch "Lazily open pack index files on demand" caused a
regression in the case of parsing abbreviated SHA-1 object names.
Git was unable to translate the abbreviated name into the full name
if the object was packed, as the pack .idx files were not opened
before being accessed.

This is a simple test to repack a repository then test for an
abbreviated SHA-1 within the packfile.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agorev-parse: Identify short sha1 sums correctly.
James Bowes [Tue, 29 May 2007 23:29:51 +0000 (19:29 -0400)]
rev-parse: Identify short sha1 sums correctly.

find_short_packed_object was not loading the pack index files.
Teach it to do so.

Signed-off-by: James Bowes <jbowes@dangerouslyinc.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agobuiltin-pack-object: cache small deltas
Martin Koegler [Mon, 28 May 2007 21:20:59 +0000 (23:20 +0200)]
builtin-pack-object: cache small deltas

Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agogit-pack-objects: cache small deltas between big objects
Martin Koegler [Mon, 28 May 2007 21:20:58 +0000 (23:20 +0200)]
git-pack-objects: cache small deltas between big objects

Creating deltas between big blobs is a CPU and memory intensive task.
In the writing phase, all (not reused) deltas are redone.

This patch adds support for caching deltas from the deltifing phase, so
that that the writing phase is faster.

The caching is limited to small deltas to avoid increasing memory usage very much.
The implemented limit is (memory needed to create the delta)/1024.

Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agobuiltin-pack-objects: don't fail, if delta is not possible
Martin Koegler [Mon, 28 May 2007 21:20:57 +0000 (23:20 +0200)]
builtin-pack-objects: don't fail, if delta is not possible

If builtin-pack-objects runs out of memory while finding
the best deltas, it bails out with an error.

If the delta index creation fails (because there is not enough memory),
we can downgrade the error message to a warning and continue with the
next object.

Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoMerge branch 'db/remote'
Junio C Hamano [Tue, 29 May 2007 08:24:20 +0000 (01:24 -0700)]
Merge branch 'db/remote'

* db/remote:
  Move refspec pattern matching to match_refs().
  Update local tracking refs when pushing
  Add handlers for fetch-side configuration of remotes.
  Move refspec parser from connect.c and cache.h to remote.{c,h}
  Move remote parsing into a library file out of builtin-push.

17 years agoMerge branch 'dh/repack' (early part)
Junio C Hamano [Tue, 29 May 2007 08:16:28 +0000 (01:16 -0700)]
Merge branch 'dh/repack' (early part)

* 'dh/repack' (early part):
  Ensure git-repack -a -d --max-pack-size=N deletes correct packs
  pack-objects: clarification & option checks for --max-pack-size
  git-repack --max-pack-size: add option parsing to enable feature
  git-repack --max-pack-size: split packs as asked by write_{object,one}()
  git-repack --max-pack-size: write_{object,one}() respect pack limit
  git-repack --max-pack-size: new file statics and code restructuring
  Alter sha1close() 3rd argument to request flush only

17 years agoMerge branch 'np/delta'
Junio C Hamano [Tue, 29 May 2007 07:49:23 +0000 (00:49 -0700)]
Merge branch 'np/delta'

* np/delta:
  update diff-delta.c copyright
  improve delta long block matching with big files

17 years agoMerge branch 'jc/nodelta'
Junio C Hamano [Tue, 29 May 2007 07:41:50 +0000 (00:41 -0700)]
Merge branch 'jc/nodelta'

* jc/nodelta:
  builtin-pack-objects: remove unnecessary code for no-delta
  Teach "delta" attribute to pack-objects.
  pack-objects: pass fullname down to add_object_entry()

17 years agoMerge branch 'ar/verbose'
Junio C Hamano [Tue, 29 May 2007 07:41:36 +0000 (00:41 -0700)]
Merge branch 'ar/verbose'

* ar/verbose:
  Add another verbosity level to git-fetch
  Verbose connect messages to show the IP addresses used

17 years agoMerge branch 'ar/run'
Junio C Hamano [Tue, 29 May 2007 07:41:22 +0000 (00:41 -0700)]
Merge branch 'ar/run'

* ar/run:
  Allow environment variables to be unset in the processes started by run_command
  Add ability to specify environment extension to run_command
  Add run_command_v_opt_cd: chdir into a directory before exec

17 years agoMerge branch 'ar/mergestat'
Junio C Hamano [Tue, 29 May 2007 07:38:52 +0000 (00:38 -0700)]
Merge branch 'ar/mergestat'

* ar/mergestat:
  Add a configuration option to control diffstat after merge

17 years agoMerge branch 'rr/cvsexport'
Junio C Hamano [Tue, 29 May 2007 07:37:23 +0000 (00:37 -0700)]
Merge branch 'rr/cvsexport'

* rr/cvsexport:
  Add option to cvs update before export

17 years agoMerge branch 'maint'
Junio C Hamano [Tue, 29 May 2007 07:27:24 +0000 (00:27 -0700)]
Merge branch 'maint'

* maint:
  cvsserver: Fix some typos in asciidoc documentation
  cvsserver: Note that CVS_SERVER can also be specified as method variable
  cvsserver: Correct inetd.conf example in asciidoc documentation
  user-manual: fixed typo in example
  Add test case for $Id$ expanded in the repository
  git-svn: avoid md5 calculation entirely if SVN doesn't provide one
  Makefile: Remove git-fsck and git-verify-pack from PROGRAMS
  Fix stupid typo in lookup_tag()
  git-gui: Guess our share/git-gui/lib path at runtime if possible
  Correct key bindings to Control-<foo>
  git-gui: Tighten internal pattern match for lib/ directory

17 years agocvsserver: Handle 'cvs login'
Frank Lichtenheld [Sun, 27 May 2007 12:33:10 +0000 (14:33 +0200)]
cvsserver: Handle 'cvs login'

Since this is a trivial variation of the general pserver
authentication, there is really no reason not to support
it.

Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agot9400: Work around CVS' deficiencies
Frank Lichtenheld [Sun, 27 May 2007 12:33:09 +0000 (14:33 +0200)]
t9400: Work around CVS' deficiencies

If we are too fast with our changes, the file in
the working copy might still have the same mtime
as noted in the CVS/Entries. This will cause CVS
to happily report to the server that the file is
unmodified which can lead to data loss (and in
our case test failure).

CVS sucks!

Work around that by sleeping for a second.

Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoAllow contrib new-workdir to link into bare repositories
Shawn O. Pearce [Sun, 27 May 2007 03:09:27 +0000 (23:09 -0400)]
Allow contrib new-workdir to link into bare repositories

On one particular system I like to keep a cluster of bare Git
repositories and spawn new-workdirs off of them.  Since the bare
repositories don't have working directories associated with them
they don't have a .git/ subdirectory that hosts the repository we
are linking to.

Using a bare repository as the backing repository for a workdir
created by this script does require that the user delete core.bare
from the repository's configuration file, so that Git auto-senses
the bareness of a repository based on pathname information, and
not based on the config file.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agomailsplit: fix for more than one input files
Junio C Hamano [Mon, 28 May 2007 22:48:07 +0000 (15:48 -0700)]
mailsplit: fix for more than one input files

Earlier commit d63bd9a broke the case where more than one input
files are fed to mailsplit by not incrementing the base counter
when splitting second and subsequent input files.  This should
fix it.

Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agocvsserver: Fix some typos in asciidoc documentation
Frank Lichtenheld [Sun, 27 May 2007 12:33:08 +0000 (14:33 +0200)]
cvsserver: Fix some typos in asciidoc documentation

Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agocvsserver: Note that CVS_SERVER can also be specified as method variable
Frank Lichtenheld [Sun, 27 May 2007 12:33:07 +0000 (14:33 +0200)]
cvsserver: Note that CVS_SERVER can also be specified as method variable

Reasonably new versions of the cvs CLI client allow one to
specifiy CVS_SERVER as a method variable directly in
CVSROOT. This is way more convinient than using an
environment variable since it gets saved in CVS/Root.

Since I only discovered this by accident I guess there
might be others out there that learnt CVS on the 1.11
series (or even earlier) and profit from such a note
about cvs improvements in the last couple years.

Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agocvsserver: Correct inetd.conf example in asciidoc documentation
Frank Lichtenheld [Sun, 27 May 2007 12:33:06 +0000 (14:33 +0200)]
cvsserver: Correct inetd.conf example in asciidoc documentation

While the given example worked, it made us look rather
incompetent. Give the correct reason why one needs the
more complex syntax and change the example to reflect
that.

Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agouser-manual: fixed typo in example
Steffen Prohaska [Sat, 26 May 2007 19:16:27 +0000 (21:16 +0200)]
user-manual: fixed typo in example

Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoAdd test case for $Id$ expanded in the repository
Andy Parkins [Sun, 27 May 2007 10:52:11 +0000 (11:52 +0100)]
Add test case for $Id$ expanded in the repository

This test case would have caught the bug fixed by revision
c23290d5.

It puts various forms of $Id$ into a file in the repository,
without allowing git to collapse them to uniformity.  Then enables the
$Id$ expansion on checkout, and checks that what is checked out has
coped with the various forms.

Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoMerge branch 'maint-1.5.1' into maint
Junio C Hamano [Tue, 29 May 2007 06:54:26 +0000 (23:54 -0700)]
Merge branch 'maint-1.5.1' into maint

* maint-1.5.1:
  git-svn: avoid md5 calculation entirely if SVN doesn't provide one
  Fix stupid typo in lookup_tag()

17 years agogit-svn: avoid md5 calculation entirely if SVN doesn't provide one
Eric Wong [Sun, 27 May 2007 22:59:01 +0000 (15:59 -0700)]
git-svn: avoid md5 calculation entirely if SVN doesn't provide one

There's no point in calculating an MD5 if we're not going to use
it.  We'll also avoid the possibility of there being a bug in the
Perl MD5 library not being able to handle zero-sized files.

This is a followup to 20b3d206acbbb042c7ad5f42d36ff8d036a538c5,
which allows us to track repositories that do not provide MD5
checksums.

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoMerge branch 'maint' of git://repo.or.cz/git-gui into maint
Junio C Hamano [Tue, 29 May 2007 03:23:10 +0000 (20:23 -0700)]
Merge branch 'maint' of git://repo.or.cz/git-gui into maint

* 'maint' of git://repo.or.cz/git-gui:
  git-gui: Guess our share/git-gui/lib path at runtime if possible
  Correct key bindings to Control-<foo>
  git-gui: Tighten internal pattern match for lib/ directory

17 years agoMakefile: Remove git-fsck and git-verify-pack from PROGRAMS
Nguyen Thai Ngoc Duy [Tue, 29 May 2007 02:05:43 +0000 (22:05 -0400)]
Makefile: Remove git-fsck and git-verify-pack from PROGRAMS

Those are builtins. Remove them from PROGRAMS variable

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agoFix stupid typo in lookup_tag()
Johan Herland [Mon, 28 May 2007 23:21:25 +0000 (01:21 +0200)]
Fix stupid typo in lookup_tag()

Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
17 years agogit-gui: Guess our share/git-gui/lib path at runtime if possible gitgui-0.7.2
Shawn O. Pearce [Sun, 27 May 2007 04:03:37 +0000 (00:03 -0400)]
git-gui: Guess our share/git-gui/lib path at runtime if possible

Johannes Sixt asked me to try to avoid embedding the runtime location
of git-gui's library directory in the executable script.  Not embedding
it helps the MinGW to be relocatable to another directory should a user
wish to install the programs in a directory other than the location the
packager wanted them to be installed into.

Most of this is a hack.  We try to determine if the path of our master
git-gui script will be able to locate the lib by ../share/git-gui/lib.
This should be true if $(gitexecdir) and $(libdir) have the same prefix.
If they do then we defer the assignment of $(libdir) until runtime, and
we get it from $argv0 rather than embedding it into the script itself.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
17 years agoupdate diff-delta.c copyright
Nicolas Pitre [Sat, 26 May 2007 02:16:27 +0000 (22:16 -0400)]
update diff-delta.c copyright

There is actually nothing left from the original LibXDiff code I used
over 2 years ago, and even the GIT implementation has diverged quite a
bit from LibXDiff's at this point.  Let's update the copyright notice
to better reflect that fact.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>