revision.c: leave a note for "a lone :" enhancement
If we later add a command in the log family that by default limit
its operation to the current subdirectory, we would need to resurrect
the "a lone ':' on the command line means no pathspec whatsoever".
Now the codepath was cleaned up, we can do so in one place. Leave a
note to mark where it is for later generations.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we later add a command in the log family that by default limit
its operation to the current subdirectory, we would need to resurrect
the "a lone ':' on the command line means no pathspec whatsoever".
Now the codepath was cleaned up, we can do so in one place. Leave a
note to mark where it is for later generations.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jc/maint-1.6.6-pathspec-stdin-and-cmdline'
* jc/maint-1.6.6-pathspec-stdin-and-cmdline:
setup_revisions(): take pathspec from command line and --stdin correctly
* jc/maint-1.6.6-pathspec-stdin-and-cmdline:
setup_revisions(): take pathspec from command line and --stdin correctly
setup_revisions(): take pathspec from command line and --stdin correctly
When the command line has "--" disambiguator, we take the remainder of
argv[] as "prune_data", but when --stdin is given at the same time,
we need to append to the existing prune_data and end up attempting to
realloc(3) it. That would not work.
Fix it by consistently using append_prune_data() throughout the input
processing. Also avoid counting the number of existing paths in the
function over and over again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the command line has "--" disambiguator, we take the remainder of
argv[] as "prune_data", but when --stdin is given at the same time,
we need to append to the existing prune_data and end up attempting to
realloc(3) it. That would not work.
Fix it by consistently using append_prune_data() throughout the input
processing. Also avoid counting the number of existing paths in the
function over and over again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3703, t4208: add test cases for magic pathspec
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev/path disambiguation: further restrict "misspelled index entry" diag
A colon followed by anything !isalnum() (e.g. ":/heh") at this point is
known not to be an existing rev. Just give a generic "neither a rev nor
a path" error message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A colon followed by anything !isalnum() (e.g. ":/heh") at this point is
known not to be an existing rev. Just give a generic "neither a rev nor
a path" error message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fix overslow :/no-such-string-ever-existed diagnostics
"git cmd :/no-such-string-ever-existed" runs an extra round of get_sha1()
since 009fee4 (Detailed diagnosis when parsing an object name fails.,
2009-12-07). Once without error diagnosis to see there is no commit with
such a string in the log message (hence "it cannot be a ref"), and after
seeing that :/no-such-string-ever-existed is not a filename (hence "it
cannot be a path, either"), another time to give "better diagnosis".
The thing is, the second time it runs, we already know that traversing the
history all the way down to the root will _not_ find any matching commit.
Rename misguided "gently" parameter, which is turned off _only_ when the
"detailed diagnosis" codepath knows that it cannot be a ref and making the
call only for the caller to die with a message. Flip its meaning (and
adjust the callers) and call it "only_to_die", which is not a great name,
but it describes far more clearly what the codepaths that switches their
behaviour based on this variable do.
On my box, the command spends ~1.8 seconds without the patch to make the
report; with the patch it spends ~1.12 seconds.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cmd :/no-such-string-ever-existed" runs an extra round of get_sha1()
since 009fee4 (Detailed diagnosis when parsing an object name fails.,
2009-12-07). Once without error diagnosis to see there is no commit with
such a string in the log message (hence "it cannot be a ref"), and after
seeing that :/no-such-string-ever-existed is not a filename (hence "it
cannot be a path, either"), another time to give "better diagnosis".
The thing is, the second time it runs, we already know that traversing the
history all the way down to the root will _not_ find any matching commit.
Rename misguided "gently" parameter, which is turned off _only_ when the
"detailed diagnosis" codepath knows that it cannot be a ref and making the
call only for the caller to die with a message. Flip its meaning (and
adjust the callers) and call it "only_to_die", which is not a great name,
but it describes far more clearly what the codepaths that switches their
behaviour based on this variable do.
On my box, the command spends ~1.8 seconds without the patch to make the
report; with the patch it spends ~1.12 seconds.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fix overstrict :<path> diagnosis
Given "git log :", we get a disambiguation message that tries to be
helpful and yet totally misses the point, i.e.
$ git log :
fatal: Path '' does not exist (neither on disk nor in the index).
$ git log :/
fatal: Path '/' exists on disk, but not in the index.
An empty path nor anything that begins with '/' cannot possibly in the
index, and it is wrong to guess that the user might have meant to access
such an index entry.
It should yield the same error message as "git log '*.c'", i.e.
$ git log '*.c'
fatal: ambiguous argument '*.c': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given "git log :", we get a disambiguation message that tries to be
helpful and yet totally misses the point, i.e.
$ git log :
fatal: Path '' does not exist (neither on disk nor in the index).
$ git log :/
fatal: Path '/' exists on disk, but not in the index.
An empty path nor anything that begins with '/' cannot possibly in the
index, and it is wrong to guess that the user might have meant to access
such an index entry.
It should yield the same error message as "git log '*.c'", i.e.
$ git log '*.c'
fatal: ambiguous argument '*.c': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: use get_pathspec() correctly
When there is no remaining string in argv, get_pathspec(prefix, argv)
will return a two-element array that has prefix as the first element,
so there is no need to re-roll that logic in the code that uses
get_pathspec().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is no remaining string in argv, get_pathspec(prefix, argv)
will return a two-element array that has prefix as the first element,
so there is no need to re-roll that logic in the code that uses
get_pathspec().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pathspec: drop "lone : means no pathspec" from get_pathspec()
We may want to give the pathspec subsystem such a feature, but not while
we are still using get_pathspec() that returns a stupid "char **" that
loses subtle nuances that existed in the input string.
In the meantime, the callers of get_pathspec() that want to support it
could do an equivalent before feeding their argv[] to the function
themselves quite easily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We may want to give the pathspec subsystem such a feature, but not while
we are still using get_pathspec() that returns a stupid "char **" that
loses subtle nuances that existed in the input string.
In the meantime, the callers of get_pathspec() that want to support it
could do an equivalent before feeding their argv[] to the function
themselves quite easily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Revert "magic pathspec: add ":(icase)path" to match case insensitively"
This reverts commit d0546e2d488b1ba185c430b638619ab1d91af509, which
was only meant to be a Proof-of-concept used during the discussion.
The real implementation of the feature needs to wait until we migrate
all the code to use "struct pathspec", not "char **", to represent
richer semantics given to pathspec.
This reverts commit d0546e2d488b1ba185c430b638619ab1d91af509, which
was only meant to be a Proof-of-concept used during the discussion.
The real implementation of the feature needs to wait until we migrate
all the code to use "struct pathspec", not "char **", to represent
richer semantics given to pathspec.
magic pathspec: add ":(icase)path" to match case insensitively
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
magic pathspec: futureproof shorthand form
The earlier design was to take whatever non-alnum that the short format
parser happens to support, leaving the rest as part of the pattern, so a
version of git that knows '*' magic and a version that does not would have
behaved differently when given ":*Makefile". The former would have
applied the '*' magic to the pattern "Makefile", while the latter would
used no magic to the pattern "*Makefile".
Instead, just reserve all non-alnum ASCII letters that are neither glob
nor regexp special as potential magic signature, and when we see a magic
that is not supported, die with an error message, just like the longhand
codepath does.
With this, ":%#!*Makefile" will always mean "%#!" magic applied to the
pattern "*Makefile", no matter what version of git is used (it is a
different matter if the version of git supports all of these three magic
matching rules).
Also make ':' without anything else to mean "there is no pathspec". This
would allow differences between "git log" and "git log ." run from the top
level of the working tree (the latter simplifies no-op commits away from
the history) to be expressed from a subdirectory by saying "git log :".
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier design was to take whatever non-alnum that the short format
parser happens to support, leaving the rest as part of the pattern, so a
version of git that knows '*' magic and a version that does not would have
behaved differently when given ":*Makefile". The former would have
applied the '*' magic to the pattern "Makefile", while the latter would
used no magic to the pattern "*Makefile".
Instead, just reserve all non-alnum ASCII letters that are neither glob
nor regexp special as potential magic signature, and when we see a magic
that is not supported, die with an error message, just like the longhand
codepath does.
With this, ":%#!*Makefile" will always mean "%#!" magic applied to the
pattern "*Makefile", no matter what version of git is used (it is a
different matter if the version of git supports all of these three magic
matching rules).
Also make ':' without anything else to mean "there is no pathspec". This
would allow differences between "git log" and "git log ." run from the top
level of the working tree (the latter simplifies no-op commits away from
the history) to be expressed from a subdirectory by saying "git log :".
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
magic pathspec: add tentative ":/path/from/top/level" pathspec support
Support ":/" magic string that can be prefixed to a pathspec element to
say "this names the path from the top-level of the working tree", when
you are in the subdirectory.
For example, you should be able to say:
$ edit Makefile ;# top-level
$ cd Documentation
$ edit git.txt ;# in the subdirectory
and then do one of three things, still inside the subdirectory:
$ git add -u . ;# add only Documentation/git.txt
$ git add -u :/ ;# add everything, including paths outside Documentation
$ git add -u ;# whatever the default setting is.
To truly support magic pathspec, the API needs to be restructured so that
get_pathspec() and init_pathspec() are unified into one call. Currently,
the former just prefixes the user supplied pathspec with the current
subdirectory path, and the latter takes the output from the former and
pre-parses them into a bit richer structure for easier handling. They
should become a single API function that takes the current subdirectory
path and the remainder of argv[] (after parsing --options and revision
arguments from the command line) and returns an array of parsed pathspec
elements, and "magic" should become attributes of struct pathspec_item.
This patch implements only "top" magic because it can be hacked into the
system without such a refactoring.
The syntax for magic pathspec prefix is designed to be extensible yet
simple to type to invoke a simple magic like "from the top". The parser
for the magic prefix is hooked into get_pathspec() function in this patch,
and it needs to be moved when we refactor the API.
But we have to start from somewhere.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support ":/" magic string that can be prefixed to a pathspec element to
say "this names the path from the top-level of the working tree", when
you are in the subdirectory.
For example, you should be able to say:
$ edit Makefile ;# top-level
$ cd Documentation
$ edit git.txt ;# in the subdirectory
and then do one of three things, still inside the subdirectory:
$ git add -u . ;# add only Documentation/git.txt
$ git add -u :/ ;# add everything, including paths outside Documentation
$ git add -u ;# whatever the default setting is.
To truly support magic pathspec, the API needs to be restructured so that
get_pathspec() and init_pathspec() are unified into one call. Currently,
the former just prefixes the user supplied pathspec with the current
subdirectory path, and the latter takes the output from the former and
pre-parses them into a bit richer structure for easier handling. They
should become a single API function that takes the current subdirectory
path and the remainder of argv[] (after parsing --options and revision
arguments from the command line) and returns an array of parsed pathspec
elements, and "magic" should become attributes of struct pathspec_item.
This patch implements only "top" magic because it can be hacked into the
system without such a refactoring.
The syntax for magic pathspec prefix is designed to be extensible yet
simple to type to invoke a simple magic like "from the top". The parser
for the magic prefix is hooked into get_pathspec() function in this patch,
and it needs to be moved when we refactor the API.
But we have to start from somewhere.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'mm/maint-log-n-with-diff-filtering'
* mm/maint-log-n-with-diff-filtering:
log: fix --max-count when used together with -S or -G
* mm/maint-log-n-with-diff-filtering:
log: fix --max-count when used together with -S or -G
Merge branch 'mg/rev-list-n-reverse-doc'
* mg/rev-list-n-reverse-doc:
git-log.txt,rev-list-options.txt: put option blocks in proper order
git-log.txt,rev-list-options.txt: -n/--max-count is commit limiting
* mg/rev-list-n-reverse-doc:
git-log.txt,rev-list-options.txt: put option blocks in proper order
git-log.txt,rev-list-options.txt: -n/--max-count is commit limiting
Merge branch 'js/rerere-forget-always-take-pathspec'
* js/rerere-forget-always-take-pathspec:
rerere forget: deprecate invocation without pathspec
* js/rerere-forget-always-take-pathspec:
rerere forget: deprecate invocation without pathspec
Merge branch 'ab/i18n-basic'
* ab/i18n-basic:
i18n: "make distclean" should clean up after "make pot"
i18n: Makefile: "pot" target to extract messages marked for translation
i18n: add stub Q_() wrapper for ngettext
i18n: do not poison translations unless GIT_GETTEXT_POISON envvar is set
i18n: add GETTEXT_POISON to simulate unfriendly translator
i18n: add no-op _() and N_() wrappers
commit, status: use status_printf{,_ln,_more} helpers
commit: refer to commit template as s->fp
wt-status: add helpers for printing wt-status lines
Conflicts:
builtin/commit.c
* ab/i18n-basic:
i18n: "make distclean" should clean up after "make pot"
i18n: Makefile: "pot" target to extract messages marked for translation
i18n: add stub Q_() wrapper for ngettext
i18n: do not poison translations unless GIT_GETTEXT_POISON envvar is set
i18n: add GETTEXT_POISON to simulate unfriendly translator
i18n: add no-op _() and N_() wrappers
commit, status: use status_printf{,_ln,_more} helpers
commit: refer to commit template as s->fp
wt-status: add helpers for printing wt-status lines
Conflicts:
builtin/commit.c
Merge branch 'uk/ls-remote-in-get-remote-url'
* uk/ls-remote-in-get-remote-url:
git-request-pull: open-code the only invocation of get_remote_url
get_remote_url(): use the same data source as ls-remote to get remote urls
* uk/ls-remote-in-get-remote-url:
git-request-pull: open-code the only invocation of get_remote_url
get_remote_url(): use the same data source as ls-remote to get remote urls
Merge branch 'ss/mergetool--lib'
* ss/mergetool--lib:
mergetool--lib: Add Beyond Compare 3 as a tool
mergetool--lib: Sort tools alphabetically for easier lookup
* ss/mergetool--lib:
mergetool--lib: Add Beyond Compare 3 as a tool
mergetool--lib: Sort tools alphabetically for easier lookup
Merge branch 'jn/status-translatable'
* jn/status-translatable:
commit, status: use status_printf{,_ln,_more} helpers
commit: refer to commit template as s->fp
wt-status: add helpers for printing wt-status lines
Conflicts:
builtin/commit.c
* jn/status-translatable:
commit, status: use status_printf{,_ln,_more} helpers
commit: refer to commit template as s->fp
wt-status: add helpers for printing wt-status lines
Conflicts:
builtin/commit.c
Merge branch 'jk/trace-sifter'
* jk/trace-sifter:
trace: give repo_setup trace its own key
add packet tracing debug code
trace: add trace_strbuf
trace: factor out "do we want to trace" logic
trace: refactor to support multiple env variables
trace: add trace_vprintf
* jk/trace-sifter:
trace: give repo_setup trace its own key
add packet tracing debug code
trace: add trace_strbuf
trace: factor out "do we want to trace" logic
trace: refactor to support multiple env variables
trace: add trace_vprintf
Merge branch 'jk/format-patch-multiline-header'
* jk/format-patch-multiline-header:
format-patch: rfc2047-encode newlines in headers
format-patch: wrap long header lines
strbuf: add fixed-length version of add_wrapped_text
* jk/format-patch-multiline-header:
format-patch: rfc2047-encode newlines in headers
format-patch: wrap long header lines
strbuf: add fixed-length version of add_wrapped_text
Merge branch 'jk/merge-rename-ux'
* jk/merge-rename-ux:
pull: propagate --progress to merge
merge: enable progress reporting for rename detection
add inexact rename detection progress infrastructure
commit: stop setting rename limit
bump rename limit defaults (again)
merge: improve inexact rename limit warning
* jk/merge-rename-ux:
pull: propagate --progress to merge
merge: enable progress reporting for rename detection
add inexact rename detection progress infrastructure
commit: stop setting rename limit
bump rename limit defaults (again)
merge: improve inexact rename limit warning
Merge branch 'maint'
* maint:
gitweb: Always call parse_date with timezone parameter
bisect: explain the rationale behind 125
* maint:
gitweb: Always call parse_date with timezone parameter
bisect: explain the rationale behind 125
grep: read patterns from stdin with -f -
Support the well-know convention of reading standard input instead of a
named file if "-" (dash) is specified. GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support the well-know convention of reading standard input instead of a
named file if "-" (dash) is specified. GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Always call parse_date with timezone parameter
Timezone is required to correctly set local time, which would be needed
for future 'localtime' feature.
While at it, remove unnecessary call to the function from git_log_body,
as its return value is not used anywhere.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Timezone is required to correctly set local time, which would be needed
for future 'localtime' feature.
While at it, remove unnecessary call to the function from git_log_body,
as its return value is not used anywhere.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bisect: explain the rationale behind 125
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
docs: fix grammar in gitattributes.txt
* maint:
docs: fix grammar in gitattributes.txt
docs: fix grammar in gitattributes.txt
[jc: with a fixlet from Marc Branchaud]
Signed-off-by: Alexei Sholik <alcosholik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[jc: with a fixlet from Marc Branchaud]
Signed-off-by: Alexei Sholik <alcosholik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Name make_*_path functions more accurately
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
RelNotes/1.7.5.txt: typo and language fixes
Also remove entries for fixes that are already present in the
maintenance track.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also remove entries for fixes that are already present in the
maintenance track.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
Prepare draft release notes to 1.7.4.2
gitweb: highlight: replace tabs with spaces
make_absolute_path: return the input path if it points to our buffer
valgrind: ignore SSE-based strlen invalid reads
diff --submodule: split into bite-sized pieces
cherry: split off function to print output lines
branch: split off function that writes tracking info and commit subject
standardize brace placement in struct definitions
compat: make gcc bswap an inline function
enums: omit trailing comma for portability
Conflicts:
RelNotes
* maint:
Prepare draft release notes to 1.7.4.2
gitweb: highlight: replace tabs with spaces
make_absolute_path: return the input path if it points to our buffer
valgrind: ignore SSE-based strlen invalid reads
diff --submodule: split into bite-sized pieces
cherry: split off function to print output lines
branch: split off function that writes tracking info and commit subject
standardize brace placement in struct definitions
compat: make gcc bswap an inline function
enums: omit trailing comma for portability
Conflicts:
RelNotes
Prepare draft release notes to 1.7.4.2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jn/maint-commit-missing-template' into maint
* jn/maint-commit-missing-template:
commit: error out for missing commit message template
* jn/maint-commit-missing-template:
commit: error out for missing commit message template
Merge branch 'lt/rename-no-extra-copy-detection' into maint
* lt/rename-no-extra-copy-detection:
diffcore-rename: improve estimate_similarity() heuristics
diffcore-rename: properly honor the difference between -M and -C
for_each_hash: allow passing a 'void *data' pointer to callback
* lt/rename-no-extra-copy-detection:
diffcore-rename: improve estimate_similarity() heuristics
diffcore-rename: properly honor the difference between -M and -C
for_each_hash: allow passing a 'void *data' pointer to callback
Merge branch 'jk/diffstat-binary' into maint
* jk/diffstat-binary:
diff: don't retrieve binary blobs for diffstat
diff: handle diffstat of rewritten binary files
* jk/diffstat-binary:
diff: don't retrieve binary blobs for diffstat
diff: handle diffstat of rewritten binary files
Merge branch 'mg/maint-difftool-vim-readonly' into maint
* mg/maint-difftool-vim-readonly:
mergetool-lib: call vim in readonly mode for diffs
* mg/maint-difftool-vim-readonly:
mergetool-lib: call vim in readonly mode for diffs
Merge branch 'jn/test-terminal-punt-on-osx-breakage' into maint
* jn/test-terminal-punt-on-osx-breakage:
tests: skip terminal output tests on OS X
* jn/test-terminal-punt-on-osx-breakage:
tests: skip terminal output tests on OS X
Merge branch 'jk/fail-null-clone' into maint
* jk/fail-null-clone:
clone: die when trying to clone missing local path
* jk/fail-null-clone:
clone: die when trying to clone missing local path
Merge branch 'jh/push-default-upstream-configname' into maint
* jh/push-default-upstream-configname:
push.default: Rename 'tracking' to 'upstream'
* jh/push-default-upstream-configname:
push.default: Rename 'tracking' to 'upstream'
Merge branch 'mg/placeholders-are-lowercase' into maint
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
Merge branch 'mg/patch-id' into maint
* mg/patch-id:
git-patch-id: do not trip over "no newline" markers
git-patch-id: test for "no newline" markers
* mg/patch-id:
git-patch-id: do not trip over "no newline" markers
git-patch-id: test for "no newline" markers
Merge branch 'js/maint-merge-use-prepare-commit-msg-hook' into maint
* js/maint-merge-use-prepare-commit-msg-hook:
merge: honor prepare-commit-msg hook
* js/maint-merge-use-prepare-commit-msg-hook:
merge: honor prepare-commit-msg hook
gitweb: highlight: replace tabs with spaces
Consider the following code fragment:
/*
* test
*/
vim ":set list" mode shows that the first character on each line is a
tab:
^I/*$
^I * test$
^I */$
By default, the "highlight" program will retain the tabs in the HTML
output:
$ highlight --fragment --syntax c test.c
<span class="hl com">/*</span>
<span class="hl com"> * test</span>
<span class="hl com"> */</span>
vim list mode:
^I<span class="hl com">/*</span>$
<span class="hl com">^I * test</span>$
<span class="hl com">^I */</span>$
In gitweb, this winds up looking something like:
1 /*
2 * test
3 */
I tried both Firefox and Opera and saw the same behavior.
The desired output is:
1 /*
2 * test
3 */
This can be accomplished by specifying "--replace-tabs=8" on the
highlight command line.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Acked-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consider the following code fragment:
/*
* test
*/
vim ":set list" mode shows that the first character on each line is a
tab:
^I/*$
^I * test$
^I */$
By default, the "highlight" program will retain the tabs in the HTML
output:
$ highlight --fragment --syntax c test.c
<span class="hl com">/*</span>
<span class="hl com"> * test</span>
<span class="hl com"> */</span>
vim list mode:
^I<span class="hl com">/*</span>$
<span class="hl com">^I * test</span>$
<span class="hl com">^I */</span>$
In gitweb, this winds up looking something like:
1 /*
2 * test
3 */
I tried both Firefox and Opera and saw the same behavior.
The desired output is:
1 /*
2 * test
3 */
This can be accomplished by specifying "--replace-tabs=8" on the
highlight command line.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Acked-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
make_absolute_path: return the input path if it points to our buffer
Some codepaths call make_absolute_path with its own return value as
input. In such a cases, return the path immediately.
This fixes a valgrind-discovered error, whereby we tried to copy a
string onto itself.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some codepaths call make_absolute_path with its own return value as
input. In such a cases, return the path immediately.
This fixes a valgrind-discovered error, whereby we tried to copy a
string onto itself.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
valgrind: ignore SSE-based strlen invalid reads
Some versions of strlen use SSE to speed up the calculation and load 4
bytes at a time, even if it means reading past the end of the
allocated memory. This read is safe and when the strlen function is
inlined, it is not replaced by valgrind, which reports a
false-possitive.
Tell valgrind to ignore this particular error, as the read is, in
fact, safe. Current upstream-released version 3.6.1 is affected. Some
distributions have this fixed in their latest versions.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of strlen use SSE to speed up the calculation and load 4
bytes at a time, even if it means reading past the end of the
allocated memory. This read is safe and when the strlen function is
inlined, it is not replaced by valgrind, which reports a
false-possitive.
Tell valgrind to ignore this particular error, as the read is, in
fact, safe. Current upstream-released version 3.6.1 is affected. Some
distributions have this fixed in their latest versions.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
vcs-svn: remove spurious semicolons
trp_gen is not a statement or function call, so it should not be
followed with a semicolon. Noticed by gcc -pedantic.
vcs-svn/repo_tree.c:41:81: warning: ISO C does not allow extra ';'
outside of a function [-pedantic]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
trp_gen is not a statement or function call, so it should not be
followed with a semicolon. Noticed by gcc -pedantic.
vcs-svn/repo_tree.c:41:81: warning: ISO C does not allow extra ';'
outside of a function [-pedantic]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff --submodule: split into bite-sized pieces
Introduce two functions:
- prepare_submodule_summary prepares the revision walker
to list changes in a submodule. That is, it:
* finds merge bases between the commits pointed to this
path from before ("left") and after ("right") the change;
* checks whether this is a fast-forward or fast-backward;
* prepares a revision walk to list commits in the symmetric
difference between the commits at each endpoint.
It returns nonzero on error.
- print_submodule_summary runs the revision walk and saves
the result to a strbuf in --left-right format.
The goal is just readability. No functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce two functions:
- prepare_submodule_summary prepares the revision walker
to list changes in a submodule. That is, it:
* finds merge bases between the commits pointed to this
path from before ("left") and after ("right") the change;
* checks whether this is a fast-forward or fast-backward;
* prepares a revision walk to list commits in the symmetric
difference between the commits at each endpoint.
It returns nonzero on error.
- print_submodule_summary runs the revision walk and saves
the result to a strbuf in --left-right format.
The goal is just readability. No functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cherry: split off function to print output lines
Readers uninterested in the details of "git cherry"'s output format
can see
print_commit('-', commit, verbose, abbrev);
and ignore the details.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Readers uninterested in the details of "git cherry"'s output format
can see
print_commit('-', commit, verbose, abbrev);
and ignore the details.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
branch: split off function that writes tracking info and commit subject
Introduce a add_verbose_info function that takes care of adding
- an abbreviated object name;
- a summary of the form [ahead x, behind y] of the relationship
to the corresponding upstream branch;
- a one line commit subject
for the tip commit of a branch, for use in "git branch -v" output.
No functional change intended. This just unindents the code a little
and makes it easier to skip on first reading.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a add_verbose_info function that takes care of adding
- an abbreviated object name;
- a summary of the form [ahead x, behind y] of the relationship
to the corresponding upstream branch;
- a one line commit subject
for the tip commit of a branch, for use in "git branch -v" output.
No functional change intended. This just unindents the code a little
and makes it easier to skip on first reading.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
standardize brace placement in struct definitions
In a struct definitions, unlike functions, the prevailing style is for
the opening brace to go on the same line as the struct name, like so:
struct foo {
int bar;
char *baz;
};
Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many
matches as 'struct [a-z_]*$'.
Linus sayeth:
Heretic people all over the world have claimed that this inconsistency
is ... well ... inconsistent, but all right-thinking people know that
(a) K&R are _right_ and (b) K&R are right.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a struct definitions, unlike functions, the prevailing style is for
the opening brace to go on the same line as the struct name, like so:
struct foo {
int bar;
char *baz;
};
Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many
matches as 'struct [a-z_]*$'.
Linus sayeth:
Heretic people all over the world have claimed that this inconsistency
is ... well ... inconsistent, but all right-thinking people know that
(a) K&R are _right_ and (b) K&R are right.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
compat: make gcc bswap an inline function
Without this change, gcc -pedantic warns:
cache.h: In function 'ce_to_dtype':
cache.h:270:21: warning: ISO C forbids braced-groups within expressions [-pedantic]
An inline function is more readable anyway.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this change, gcc -pedantic warns:
cache.h: In function 'ce_to_dtype':
cache.h:270:21: warning: ISO C forbids braced-groups within expressions [-pedantic]
An inline function is more readable anyway.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
enums: omit trailing comma for portability
Since v1.7.2-rc0~23^2~2 (Add per-repository eol normalization,
2010-05-19), building with gcc -std=gnu89 -pedantic produces warnings
like the following:
convert.c:21:11: warning: comma at end of enumerator list [-pedantic]
gcc is right to complain --- these commas are not permitted in C89.
In the spirit of v1.7.2-rc0~32^2~16 (2010-05-14), remove them.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.2-rc0~23^2~2 (Add per-repository eol normalization,
2010-05-19), building with gcc -std=gnu89 -pedantic produces warnings
like the following:
convert.c:21:11: warning: comma at end of enumerator list [-pedantic]
gcc is right to complain --- these commas are not permitted in C89.
In the spirit of v1.7.2-rc0~32^2~16 (2010-05-14), remove them.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'nd/struct-pathspec'
* nd/struct-pathspec:
declare 1-bit bitfields to be unsigned
* nd/struct-pathspec:
declare 1-bit bitfields to be unsigned
declare 1-bit bitfields to be unsigned
As "gcc -pedantic" notices, a two's complement 1-bit signed integer
cannot represent the value '1'.
dir.c: In function 'init_pathspec':
dir.c:1291:4: warning: overflow in implicit constant conversion [-Woverflow]
In the spirit of v1.7.1-rc1~10 (2010-04-06), 'unsigned' is what was
intended, so let's make the flags unsigned.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As "gcc -pedantic" notices, a two's complement 1-bit signed integer
cannot represent the value '1'.
dir.c: In function 'init_pathspec':
dir.c:1291:4: warning: overflow in implicit constant conversion [-Woverflow]
In the spirit of v1.7.1-rc1~10 (2010-04-06), 'unsigned' is what was
intended, so let's make the flags unsigned.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update draft release notes to 1.7.5
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jk/strbuf-vaddf'
* jk/strbuf-vaddf:
compat: fall back on __va_copy if available
strbuf: add strbuf_vaddf
compat: provide a fallback va_copy definition
* jk/strbuf-vaddf:
compat: fall back on __va_copy if available
strbuf: add strbuf_vaddf
compat: provide a fallback va_copy definition
Merge branch 'mm/push-default-advice'
* mm/push-default-advice:
push: better error message when no remote configured
push: better error messages when push.default = tracking
* mm/push-default-advice:
push: better error message when no remote configured
push: better error messages when push.default = tracking
Merge branch 'jn/maint-instaweb-plack-fix'
* jn/maint-instaweb-plack-fix:
git-instaweb: Change how gitweb.psgi is made runnable as standalone app
* jn/maint-instaweb-plack-fix:
git-instaweb: Change how gitweb.psgi is made runnable as standalone app
Merge branch 'sp/maint-fd-limit'
* sp/maint-fd-limit:
sha1_file.c: Don't retain open fds on small packs
mingw: add minimum getrlimit() compatibility stub
Limit file descriptors used by packs
* sp/maint-fd-limit:
sha1_file.c: Don't retain open fds on small packs
mingw: add minimum getrlimit() compatibility stub
Limit file descriptors used by packs
Merge branch 'jc/checkout-orphan-warning'
* jc/checkout-orphan-warning:
commit: give final warning when reattaching HEAD to leave commits behind
* jc/checkout-orphan-warning:
commit: give final warning when reattaching HEAD to leave commits behind
Merge branch 'jh/maint-do-not-track-non-branches'
* jh/maint-do-not-track-non-branches:
branch/checkout --track: Ensure that upstream branch is indeed a branch
* jh/maint-do-not-track-non-branches:
branch/checkout --track: Ensure that upstream branch is indeed a branch
Merge branch 'fk/maint-cvsimport-early-failure'
* fk/maint-cvsimport-early-failure:
git-cvsimport.perl: Bail out right away when reading from the server fails
* fk/maint-cvsimport-early-failure:
git-cvsimport.perl: Bail out right away when reading from the server fails
Merge branch 'jc/maint-apply-report-offset'
* jc/maint-apply-report-offset:
apply -v: show offset count when patch did not apply exactly
* jc/maint-apply-report-offset:
apply -v: show offset count when patch did not apply exactly
Merge branch 'jc/maint-apply-no-double-patch'
* jc/maint-apply-no-double-patch:
apply: do not patch lines that were already patched
* jc/maint-apply-no-double-patch:
apply: do not patch lines that were already patched
Merge branch 'mr/hpux'
* mr/hpux:
git-compat-util.h: Honor HP C's noreturn attribute
Makefile: add NO_FNMATCH_CASEFOLD to HP-UX section
* mr/hpux:
git-compat-util.h: Honor HP C's noreturn attribute
Makefile: add NO_FNMATCH_CASEFOLD to HP-UX section
Documentation: running test with --debug keeps "trash" directory
Signed-off-by: Piotr Krukowiecki <piotr.krukowiecki@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Piotr Krukowiecki <piotr.krukowiecki@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jk/doc-credits' of git://github.com/peff/git
* 'jk/doc-credits' of git://github.com/peff/git:
docs: point git.txt author credits to git-scm.com
doc: add missing git footers
doc: drop author/documentation sections from most pages
* 'jk/doc-credits' of git://github.com/peff/git:
docs: point git.txt author credits to git-scm.com
doc: add missing git footers
doc: drop author/documentation sections from most pages
Merge branch 'sp/maint-smart-http-sans-100-continue'
* sp/maint-smart-http-sans-100-continue:
smart-http: Really never use Expect: 100-continue
* sp/maint-smart-http-sans-100-continue:
smart-http: Really never use Expect: 100-continue
smart-http: Really never use Expect: 100-continue
libcurl may choose to try and use Expect: 100-continue for
any type of POST, not just a Transfer: chunked-encoding type.
Force it to disable this feature, as not all proxy servers support
100-continue and leaving it enabled can cause 1 second stalls during
the negotiation phase of fetch-pack/upload-pack.
In ("206b099d26 smart-http: Don't use Expect: 100-Continue") we
tried to disable this for only large POST bodies, but it should be
disabled for every POST body.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
libcurl may choose to try and use Expect: 100-continue for
any type of POST, not just a Transfer: chunked-encoding type.
Force it to disable this feature, as not all proxy servers support
100-continue and leaving it enabled can cause 1 second stalls during
the negotiation phase of fetch-pack/upload-pack.
In ("206b099d26 smart-http: Don't use Expect: 100-Continue") we
tried to disable this for only large POST bodies, but it should be
disabled for every POST body.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: "rebase <onto> <that>" stays on <that> branch upon exit
This change makes it clearer that the change to the history effected by
executing 'git rebase master' while on 'topic' branch, and by executing
'git rebase master topic' on any branch, will be the same; the implicit
checkout of the second form will remain after the rebase exits.
Signed-off-by: Drew Northup <drew.northup@maine.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change makes it clearer that the change to the history effected by
executing 'git rebase master' while on 'topic' branch, and by executing
'git rebase master topic' on any branch, will be the same; the implicit
checkout of the second form will remain after the rebase exits.
Signed-off-by: Drew Northup <drew.northup@maine.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
object.h: Remove obsolete struct object_refs
7914053 (Remove unused object-ref code, 2008-02-25) removed all uses of
the structure from the code, but forgot to remove the type definition
itself.
Signed-off-by: Jakob Pfender <jpfender@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7914053 (Remove unused object-ref code, 2008-02-25) removed all uses of
the structure from the code, but forgot to remove the type definition
itself.
Signed-off-by: Jakob Pfender <jpfender@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'pw/p4'
* pw/p4:
git-p4: test clone @all
git-p4: fix clone @all regression
* pw/p4:
git-p4: test clone @all
git-p4: fix clone @all regression
git-p4: test clone @all
Cloning a p4 depot by default generates a single commit. The use
of the "@all" revision specifier instead tells git-p4 to import
all commits. Check to make sure both these invocations work as
expected.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cloning a p4 depot by default generates a single commit. The use
of the "@all" revision specifier instead tells git-p4 to import
all commits. Check to make sure both these invocations work as
expected.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4: fix clone @all regression
e32e00d (git-p4: better message for "git-p4 sync" when not cloned,
2011-02-19) broke the use of the "@all" revision specifier, e.g.,
git-p4 clone //depot/xxx@all
Fix it as per Tor Arvid's quick patch.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Reported-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Based-on-patch-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e32e00d (git-p4: better message for "git-p4 sync" when not cloned,
2011-02-19) broke the use of the "@all" revision specifier, e.g.,
git-p4 clone //depot/xxx@all
Fix it as per Tor Arvid's quick patch.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Reported-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Based-on-patch-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
docs: point git.txt author credits to git-scm.com
There is a nice shortlog-ish output of the authors there. We
also point people directly to shortlog, but of course they
might be reading the documentation online or from a binary
package of git.
There is a nice shortlog-ish output of the authors there. We
also point people directly to shortlog, but of course they
might be reading the documentation online or from a binary
package of git.
doc: add missing git footers
Almost every page has a footer that links back to the main
git(1) page. Let's add it on the few that are missing it.
Almost every page has a footer that links back to the main
git(1) page. Let's add it on the few that are missing it.
doc: drop author/documentation sections from most pages
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
Merge branch 'maint'
* maint:
Revert "core.abbrevguard: Ensure short object names stay unique a bit longer"
* maint:
Revert "core.abbrevguard: Ensure short object names stay unique a bit longer"
Revert "core.abbrevguard: Ensure short object names stay unique a bit longer"
This reverts commit 72a5b561fc1c4286bc7c5b0693afc076af261e1f, as adding
fixed number of hexdigits more than necessary to make one object name
locally unique does not help in futureproofing the uniqueness of names
we generate today.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 72a5b561fc1c4286bc7c5b0693afc076af261e1f, as adding
fixed number of hexdigits more than necessary to make one object name
locally unique does not help in futureproofing the uniqueness of names
we generate today.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
i18n: "make distclean" should clean up after "make pot"
This is in "make distclean" and not "make clean" to avoid needlessly
changing the POT-Creation-Date in the following scenario:
make clean; # cleaning up after an old build
git pull
make pot; # regenerate po template if necessary
msgmerge po/my_language.po po/git.pot
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in "make distclean" and not "make clean" to avoid needlessly
changing the POT-Creation-Date in the following scenario:
make clean; # cleaning up after an old build
git pull
make pot; # regenerate po template if necessary
msgmerge po/my_language.po po/git.pot
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
i18n: Makefile: "pot" target to extract messages marked for translation
Add rules to generate a template (po/git.pot) listing messages marked
for translation in the C portion of git.
To get started translating, just run "make pot".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add rules to generate a template (po/git.pot) listing messages marked
for translation in the C portion of git.
To get started translating, just run "make pot".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
i18n: add stub Q_() wrapper for ngettext
The Q_ function translates a string representing some pharse with an
alternative plural form and uses the 'count' argument to choose which
form to return. Use of Q_ solves the "%d noun(s)" problem in a way
that is portable to languages outside the Germanic and Romance
families.
In English, the semantics of Q_(sing, plur, count) are roughly
equivalent to
count == 1 ? _(sing) : _(plur)
while in other languages there can be more variants (count == 0; more
random-looking rules based on the historical pronunciation of the
number). Behind the scenes, the singular form is used to look up a
family of translations and the plural form is ignored unless no
translation is available.
Define such a Q_ in gettext.h with the English semantics so C code can
start using it to mark phrases with a count for translation.
The name "Q_" is taken from subversion and stands for "quantity".
Many projects just use ngettext directly without a wrapper analogous
to _; we should not do so because git's gettext.h is meant not to
conflict with system headers that might include libintl.h.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Q_ function translates a string representing some pharse with an
alternative plural form and uses the 'count' argument to choose which
form to return. Use of Q_ solves the "%d noun(s)" problem in a way
that is portable to languages outside the Germanic and Romance
families.
In English, the semantics of Q_(sing, plur, count) are roughly
equivalent to
count == 1 ? _(sing) : _(plur)
while in other languages there can be more variants (count == 0; more
random-looking rules based on the historical pronunciation of the
number). Behind the scenes, the singular form is used to look up a
family of translations and the plural form is ignored unless no
translation is available.
Define such a Q_ in gettext.h with the English semantics so C code can
start using it to mark phrases with a count for translation.
The name "Q_" is taken from subversion and stands for "quantity".
Many projects just use ngettext directly without a wrapper analogous
to _; we should not do so because git's gettext.h is meant not to
conflict with system headers that might include libintl.h.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update Release Notes to 1.7.5
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'js/cherry-pick-usability'
* js/cherry-pick-usability:
Teach commit about CHERRY_PICK_HEAD
bash: teach __git_ps1 about CHERRY_PICK_HEAD
Introduce CHERRY_PICK_HEAD
t3507: introduce pristine-detach helper
* js/cherry-pick-usability:
Teach commit about CHERRY_PICK_HEAD
bash: teach __git_ps1 about CHERRY_PICK_HEAD
Introduce CHERRY_PICK_HEAD
t3507: introduce pristine-detach helper
Merge branch 'js/checkout-untracked-symlink'
* js/checkout-untracked-symlink:
do not overwrite untracked symlinks
Demonstrate breakage: checkout overwrites untracked symlink with directory
* js/checkout-untracked-symlink:
do not overwrite untracked symlinks
Demonstrate breakage: checkout overwrites untracked symlink with directory
Merge branch 'so/submodule-no-update-first-time'
* so/submodule-no-update-first-time:
t7406: "git submodule update {--merge|--rebase]" with new submodules
submodule: no [--merge|--rebase] when newly cloned
* so/submodule-no-update-first-time:
t7406: "git submodule update {--merge|--rebase]" with new submodules
submodule: no [--merge|--rebase] when newly cloned
git-log.txt,rev-list-options.txt: put option blocks in proper order
Match the order of the description to the one in which they get applied:
commit limiting
commit ordering
commit formatting
diff options
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Match the order of the description to the one in which they get applied:
commit limiting
commit ordering
commit formatting
diff options
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
log: fix --max-count when used together with -S or -G
The --max-count limit is implemented by counting revisions in
get_revision(), but the -S and -G take effect later when running diff.
Hence "--max-count=10 -Sfoo" meant "examine the 10 first revisions, and
out of them, show only those changing the occurences of foo", not "show 10
revisions changing the occurences of foo".
In case the commit isn't actually shown, cancel the decrement of
max_count.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --max-count limit is implemented by counting revisions in
get_revision(), but the -S and -G take effect later when running diff.
Hence "--max-count=10 -Sfoo" meant "examine the 10 first revisions, and
out of them, show only those changing the occurences of foo", not "show 10
revisions changing the occurences of foo".
In case the commit isn't actually shown, cancel the decrement of
max_count.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
Fix typo in t/README
ls-remote documentation: <refs> argument is optional
Add Author and Documentation sections to git-for-each-ref.txt
Documentation: remove redundant colons in git-for-each-ref.txt
* maint:
Fix typo in t/README
ls-remote documentation: <refs> argument is optional
Add Author and Documentation sections to git-for-each-ref.txt
Documentation: remove redundant colons in git-for-each-ref.txt
Fix typo in t/README
Signed-off-by: Mathias Lafeldt <misfire@debugon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Mathias Lafeldt <misfire@debugon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-remote documentation: <refs> argument is optional
Correct SYNOPSIS section.
Signed-off-by: Piotr Krukowiecki <piotr.krukowiecki@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct SYNOPSIS section.
Signed-off-by: Piotr Krukowiecki <piotr.krukowiecki@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add Author and Documentation sections to git-for-each-ref.txt
Signed-off-by: Alexei Sholik <alcosholik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Alexei Sholik <alcosholik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: remove redundant colons in git-for-each-ref.txt
Signed-off-by: Alexei Sholik <alcosholik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Alexei Sholik <alcosholik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
SubmittingPatches: clarify the expected commit log description
diff format documentation: clarify --cc and -c
rev-list-options.txt: typo fix
* maint:
SubmittingPatches: clarify the expected commit log description
diff format documentation: clarify --cc and -c
rev-list-options.txt: typo fix
transport-helper.c: fix check for (size_t < 0)
'bytes' is of type size_t which is unsigned thus can't be negative. But
the assigned write() returns ssize_t, and -1 on error.
For testing < 0, 'bytes' needs to be of a signed type.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'bytes' is of type size_t which is unsigned thus can't be negative. But
the assigned write() returns ssize_t, and -1 on error.
For testing < 0, 'bytes' needs to be of a signed type.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SubmittingPatches: clarify the expected commit log description
Earlier, 47afed5 (SubmittingPatches: itemize and reflect upon well written
changes, 2009-04-28) added a discussion on the contents of the commit log
message, but the last part of the new paragraph didn't make much sense.
Reword it slightly to make it more readable.
Update the "quicklist" to clarify what we mean by "motivation" and
"contrast". Also mildly discourage external references.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, 47afed5 (SubmittingPatches: itemize and reflect upon well written
changes, 2009-04-28) added a discussion on the contents of the commit log
message, but the last part of the new paragraph didn't make much sense.
Reword it slightly to make it more readable.
Update the "quicklist" to clarify what we mean by "motivation" and
"contrast". Also mildly discourage external references.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff format documentation: clarify --cc and -c
The description was unclear if -c or --cc was the default (--cc is for
some commands), and incorrectly implied that the default applies to
all the diff generating commands.
Most importantly, "log" does not default to "--cc" (it defaults to
"--no-merges") and "log -p" obeys the user's wish to see non-combined
format. Only "diff" (during merge and three-blob comparison) and
"show" use --cc as the default.
Signed-off-by: Adam Monsen <haircut@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description was unclear if -c or --cc was the default (--cc is for
some commands), and incorrectly implied that the default applies to
all the diff generating commands.
Most importantly, "log" does not default to "--cc" (it defaults to
"--no-merges") and "log -p" obeys the user's wish to see non-combined
format. Only "diff" (during merge and three-blob comparison) and
"show" use --cc as the default.
Signed-off-by: Adam Monsen <haircut@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit, status: use status_printf{,_ln,_more} helpers
wt-status code is used to provide a reminder of changes included and
not included for the commit message template opened in the operator's
text editor by "git commit". Therefore each line of its output begins
with the comment character "#":
# Please enter the commit message for your changes. Lines starting
Use the new status_printf{,_ln,_more} functions to take care of adding
"#" to the beginning of such status lines automatically. Using these
will have two advantages over the current code:
- The obvious one is to force separation of the "#" from the
translatable part of the message when git learns to translate its
output.
- Another advantage is that this makes it easier for us to drop "#"
prefix in "git status" output in later versions of git if we want
to.
Explained-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt-status code is used to provide a reminder of changes included and
not included for the commit message template opened in the operator's
text editor by "git commit". Therefore each line of its output begins
with the comment character "#":
# Please enter the commit message for your changes. Lines starting
Use the new status_printf{,_ln,_more} functions to take care of adding
"#" to the beginning of such status lines automatically. Using these
will have two advantages over the current code:
- The obvious one is to force separation of the "#" from the
translatable part of the message when git learns to translate its
output.
- Another advantage is that this makes it easier for us to drop "#"
prefix in "git status" output in later versions of git if we want
to.
Explained-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: refer to commit template as s->fp
Instead of maintaining a local variable for it, use s->fp to keep
track of where the commit message template should be written.
This prepares us to take advantage of the status_printf functions,
which use a struct wt_status instead of a FILE pointer to determine
where to send their output.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of maintaining a local variable for it, use s->fp to keep
track of where the commit message template should be written.
This prepares us to take advantage of the status_printf functions,
which use a struct wt_status instead of a FILE pointer to determine
where to send their output.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>