![[tokkee]](http://tokkee.org/images/avatar.png){kind=avatar}
upload-pack: avoid parsing tag destinations
When upload-pack advertises refs, it dereferences any tags
it sees, and shows the resulting sha1 to the client. It does
this by calling deref_tag. That function must load and parse
each tag object to find the sha1 of the tagged object.
However, it also ends up parsing the tagged object itself,
which is not strictly necessary for upload-pack's use.
Each tag produces two object loads (assuming it is not a
recursive tag), when it could get away with only a single
one. Dropping the second load halves the effort we spend.
The downside is that we are no longer verifying the
resulting object by loading it. In particular:
1. We never cross-check the "type" field given in the tag
object with the type of the pointed-to object. If the
tag says it points to a tag but doesn't, then we will
keep peeling and realize the error. If the tag says it
points to a non-tag but actually points to a tag, we
will stop peeling and just advertise the pointed-to
tag.
2. If we are missing the pointed-to object, we will not
realize (because we never even look it up in the object
db).
However, both of these are errors in the object database,
and both will be detected if a client actually requests the
broken objects in question. So we are simply pushing the
verification away from the advertising stage, and down to
the actual fetching stage.
On my test repo with 120K refs, this drops the time to
advertise the refs from ~3.2s to ~2.0s.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When upload-pack advertises refs, it dereferences any tags
it sees, and shows the resulting sha1 to the client. It does
this by calling deref_tag. That function must load and parse
each tag object to find the sha1 of the tagged object.
However, it also ends up parsing the tagged object itself,
which is not strictly necessary for upload-pack's use.
Each tag produces two object loads (assuming it is not a
recursive tag), when it could get away with only a single
one. Dropping the second load halves the effort we spend.
The downside is that we are no longer verifying the
resulting object by loading it. In particular:
1. We never cross-check the "type" field given in the tag
object with the type of the pointed-to object. If the
tag says it points to a tag but doesn't, then we will
keep peeling and realize the error. If the tag says it
points to a non-tag but actually points to a tag, we
will stop peeling and just advertise the pointed-to
tag.
2. If we are missing the pointed-to object, we will not
realize (because we never even look it up in the object
db).
However, both of these are errors in the object database,
and both will be detected if a client actually requests the
broken objects in question. So we are simply pushing the
verification away from the advertising stage, and down to
the actual fetching stage.
On my test repo with 120K refs, this drops the time to
advertise the refs from ~3.2s to ~2.0s.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-pack: avoid parsing objects during ref advertisement
When we advertise a ref, the first thing we do is parse the
pointed-to object. This gives us two things:
1. a "struct object" we can use to store flags
2. the type of the object, so we know whether we need to
dereference it as a tag
Instead, we can just use lookup_unknown_object to get an
object struct, and then fill in just the type field using
sha1_object_info (which, in the case of packed files, can
find the information without actually inflating the object
data).
This can save time if you have a large number of refs, and
the client isn't actually going to request those refs (e.g.,
because most of them are already up-to-date).
The downside is that we are no longer verifying objects that
we advertise by fully parsing them (however, we do still
know we actually have them, because sha1_object_info must
find them to get the type). While we might fail to detect a
corrupt object here, if the client actually fetches the
object, we will parse (and verify) it then.
On a repository with 120K refs, the advertisement portion of
upload-pack goes from ~3.4s to 3.2s (the failure to speed up
more is largely due to the fact that most of these refs are
tags, which need dereferenced to find the tag destination
anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we advertise a ref, the first thing we do is parse the
pointed-to object. This gives us two things:
1. a "struct object" we can use to store flags
2. the type of the object, so we know whether we need to
dereference it as a tag
Instead, we can just use lookup_unknown_object to get an
object struct, and then fill in just the type field using
sha1_object_info (which, in the case of packed files, can
find the information without actually inflating the object
data).
This can save time if you have a large number of refs, and
the client isn't actually going to request those refs (e.g.,
because most of them are already up-to-date).
The downside is that we are no longer verifying objects that
we advertise by fully parsing them (however, we do still
know we actually have them, because sha1_object_info must
find them to get the type). While we might fail to detect a
corrupt object here, if the client actually fetches the
object, we will parse (and verify) it then.
On a repository with 120K refs, the advertisement portion of
upload-pack goes from ~3.4s to 3.2s (the failure to speed up
more is largely due to the fact that most of these refs are
tags, which need dereferenced to find the tag destination
anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_object: try internal cache before reading object db
When parse_object is called, we do the following:
1. read the object data into a buffer via read_sha1_file
2. call parse_object_buffer, which then:
a. calls the appropriate lookup_{commit,tree,blob,tag}
to either create a new "struct object", or to find
an existing one. We know the appropriate type from
the lookup in step 1.
b. calls the appropriate parse_{commit,tree,blob,tag}
to parse the buffer for the new (or existing) object
In step 2b, all of the called functions are no-ops for
object "X" if "X->object.parsed" is set. I.e., when we have
already parsed an object, we end up going to a lot of work
just to find out at a low level that there is nothing left
for us to do (and we throw away the data from read_sha1_file
unread).
We can optimize this by moving the check for "do we have an
in-memory object" from 2a before the expensive call to
read_sha1_file in step 1.
This might seem circular, since step 2a uses the type
information determined in step 1 to call the appropriate
lookup function. However, we can notice that all of the
lookup_* functions are backed by lookup_object. In other
words, all of the objects are kept in a master hash table,
and we don't actually need the type to do the "do we have
it" part of the lookup, only to do the "and create it if it
doesn't exist" part.
This can save time whenever we call parse_object on the same
sha1 twice in a single program. Some code paths already
perform this optimization manually, with either:
if (!obj->parsed)
obj = parse_object(obj->sha1);
if you already have a "struct object", or:
struct object *obj = lookup_unknown_object(sha1);
if (!obj || !obj->parsed)
obj = parse_object(sha1);
if you don't. This patch moves the optimization into
parse_object itself.
Most git operations won't notice any impact. Either they
don't parse a lot of duplicate sha1s, or the calling code
takes special care not to re-parse objects. I timed two
code paths that do benefit (there may be more, but these two
were immediately obvious and easy to time).
The first is fast-export, which calls parse_object on each
object it outputs, like this:
object = parse_object(sha1);
if (!object)
die(...);
if (object->flags & SHOWN)
return;
which means that just to realize we have already shown an
object, we will read the whole object from disk!
With this patch, my best-of-five time for "fast-export --all" on
git.git dropped from 26.3s to 21.3s.
The second case is upload-pack, which will call parse_object
for each advertised ref (because it needs to peel tags to
show "^{}" entries). This doesn't matter for most
repositories, because they don't have a lot of refs pointing
to the same objects. However, if you have a big alternates
repository with a shared object db for a number of child
repositories, then the alternates repository will have
duplicated refs representing each of its children.
For example, GitHub's alternates repository for git.git has
~120,000 refs, of which only ~3200 are unique. The time for
upload-pack to print its list of advertised refs dropped
from 3.4s to 0.76s.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parse_object is called, we do the following:
1. read the object data into a buffer via read_sha1_file
2. call parse_object_buffer, which then:
a. calls the appropriate lookup_{commit,tree,blob,tag}
to either create a new "struct object", or to find
an existing one. We know the appropriate type from
the lookup in step 1.
b. calls the appropriate parse_{commit,tree,blob,tag}
to parse the buffer for the new (or existing) object
In step 2b, all of the called functions are no-ops for
object "X" if "X->object.parsed" is set. I.e., when we have
already parsed an object, we end up going to a lot of work
just to find out at a low level that there is nothing left
for us to do (and we throw away the data from read_sha1_file
unread).
We can optimize this by moving the check for "do we have an
in-memory object" from 2a before the expensive call to
read_sha1_file in step 1.
This might seem circular, since step 2a uses the type
information determined in step 1 to call the appropriate
lookup function. However, we can notice that all of the
lookup_* functions are backed by lookup_object. In other
words, all of the objects are kept in a master hash table,
and we don't actually need the type to do the "do we have
it" part of the lookup, only to do the "and create it if it
doesn't exist" part.
This can save time whenever we call parse_object on the same
sha1 twice in a single program. Some code paths already
perform this optimization manually, with either:
if (!obj->parsed)
obj = parse_object(obj->sha1);
if you already have a "struct object", or:
struct object *obj = lookup_unknown_object(sha1);
if (!obj || !obj->parsed)
obj = parse_object(sha1);
if you don't. This patch moves the optimization into
parse_object itself.
Most git operations won't notice any impact. Either they
don't parse a lot of duplicate sha1s, or the calling code
takes special care not to re-parse objects. I timed two
code paths that do benefit (there may be more, but these two
were immediately obvious and easy to time).
The first is fast-export, which calls parse_object on each
object it outputs, like this:
object = parse_object(sha1);
if (!object)
die(...);
if (object->flags & SHOWN)
return;
which means that just to realize we have already shown an
object, we will read the whole object from disk!
With this patch, my best-of-five time for "fast-export --all" on
git.git dropped from 26.3s to 21.3s.
The second case is upload-pack, which will call parse_object
for each advertised ref (because it needs to peel tags to
show "^{}" entries). This doesn't matter for most
repositories, because they don't have a lot of refs pointing
to the same objects. However, if you have a big alternates
repository with a shared object db for a number of child
repositories, then the alternates repository will have
duplicated refs representing each of its children.
For example, GitHub's alternates repository for git.git has
~120,000 refs, of which only ~3200 are unique. The time for
upload-pack to print its list of advertised refs dropped
from 3.4s to 0.76s.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
t5550: repack everything into one file
Catch invalid --depth option passed to clone or fetch
* maint:
t5550: repack everything into one file
Catch invalid --depth option passed to clone or fetch
t5550: repack everything into one file
Subsequently we assume that there is only one pack. Currently this is
true only by accident. Pass '-a -d' to repack in order to guarantee that
assumption to hold true.
The prune-packed command is now redundant since repack -d already calls
it.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subsequently we assume that there is only one pack. Currently this is
true only by accident. Pass '-a -d' to repack in order to guarantee that
assumption to hold true.
The prune-packed command is now redundant since repack -d already calls
it.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'nd/maint-parse-depth' into maint
* nd/maint-parse-depth:
Catch invalid --depth option passed to clone or fetch
* nd/maint-parse-depth:
Catch invalid --depth option passed to clone or fetch
Catch invalid --depth option passed to clone or fetch
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'pw/p4-docs-and-tests'
* pw/p4-docs-and-tests:
git-p4: document and test submit options
git-p4: test and document --use-client-spec
git-p4: test --keep-path
git-p4: test --max-changes
git-p4: document and test --import-local
git-p4: honor --changesfile option and test
git-p4: document and test clone --branch
git-p4: test cloning with two dirs, clarify doc
git-p4: clone does not use --git-dir
git-p4: introduce asciidoc documentation
rename git-p4 tests
* pw/p4-docs-and-tests:
git-p4: document and test submit options
git-p4: test and document --use-client-spec
git-p4: test --keep-path
git-p4: test --max-changes
git-p4: document and test --import-local
git-p4: honor --changesfile option and test
git-p4: document and test clone --branch
git-p4: test cloning with two dirs, clarify doc
git-p4: clone does not use --git-dir
git-p4: introduce asciidoc documentation
rename git-p4 tests
Merge branch 'maint'
* maint:
docs: describe behavior of relative submodule URLs
fix hang in git fetch if pointed at a 0 length bundle
Documentation: read-tree --prefix works with existing subtrees
Add MYMETA.json to perl/.gitignore
* maint:
docs: describe behavior of relative submodule URLs
fix hang in git fetch if pointed at a 0 length bundle
Documentation: read-tree --prefix works with existing subtrees
Add MYMETA.json to perl/.gitignore
Merge branch 'maint-1.7.7' into maint
* maint-1.7.7:
docs: describe behavior of relative submodule URLs
Documentation: read-tree --prefix works with existing subtrees
Add MYMETA.json to perl/.gitignore
* maint-1.7.7:
docs: describe behavior of relative submodule URLs
Documentation: read-tree --prefix works with existing subtrees
Add MYMETA.json to perl/.gitignore
Merge branch 'maint-1.7.6' into maint-1.7.7
* maint-1.7.6:
Documentation: read-tree --prefix works with existing subtrees
Add MYMETA.json to perl/.gitignore
* maint-1.7.6:
Documentation: read-tree --prefix works with existing subtrees
Add MYMETA.json to perl/.gitignore
docs: describe behavior of relative submodule URLs
Since the relative submodule URLs have been introduced in f31a522a2d, they
do not conform to the rules for resolving relative URIs but rather to
those of relative directories.
Document that behavior.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the relative submodule URLs have been introduced in f31a522a2d, they
do not conform to the rules for resolving relative URIs but rather to
those of relative directories.
Document that behavior.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fix hang in git fetch if pointed at a 0 length bundle
git-repo if interupted at the exact wrong time will generate zero
length bundles- literal empty files. git-repo is wrong here, but
git fetch shouldn't effectively spin loop if pointed at a zero
length bundle.
Signed-off-by: Brian Harring <ferringb@chromium.org>
Helped-by: Johannes Sixt
Helped-by: Nguyen Thai Ngoc Duy
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-repo if interupted at the exact wrong time will generate zero
length bundles- literal empty files. git-repo is wrong here, but
git fetch shouldn't effectively spin loop if pointed at a zero
length bundle.
Signed-off-by: Brian Harring <ferringb@chromium.org>
Helped-by: Johannes Sixt
Helped-by: Nguyen Thai Ngoc Duy
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: read-tree --prefix works with existing subtrees
Since 34110cd4 (Make 'unpack_trees()' have a separate source and
destination index) it is no longer true that a subdirectory with
the same prefix must not exist.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 34110cd4 (Make 'unpack_trees()' have a separate source and
destination index) it is no longer true that a subdirectory with
the same prefix must not exist.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add MYMETA.json to perl/.gitignore
ExtUtils::MakeMaker generates MYMETA.json in addition to MYMETA.yml
since version 6.57_07. As it suggests, it is just meta information about
the build and is cleaned up with 'make clean', so it should be ignored.
Signed-off-by: Jack Nagel <jacknagel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ExtUtils::MakeMaker generates MYMETA.json in addition to MYMETA.yml
since version 6.57_07. As it suggests, it is just meta information about
the build and is cleaned up with 'make clean', so it should be ignored.
Signed-off-by: Jack Nagel <jacknagel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update draft release notes to 1.7.9
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sync with 1.7.8.2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 1.7.8.2
Contains accumulated fixes since 1.7.8 that have been merged to the
'master' branch in preparation for the 1.7.9 release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Contains accumulated fixes since 1.7.8 that have been merged to the
'master' branch in preparation for the 1.7.9 release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jv/maint-config-set' into maint
* jv/maint-config-set:
Fix an incorrect reference to --set-all.
* jv/maint-config-set:
Fix an incorrect reference to --set-all.
Merge branch 'jk/follow-rename-score' into maint
* jk/follow-rename-score:
use custom rename score during --follow
* jk/follow-rename-score:
use custom rename score during --follow
Merge branch 'jc/checkout-m-twoway' into maint
* jc/checkout-m-twoway:
t/t2023-checkout-m.sh: fix use of test_must_fail
checkout_merged(): squelch false warning from some gcc
Test 'checkout -m -- path'
checkout -m: no need to insist on having all 3 stages
* jc/checkout-m-twoway:
t/t2023-checkout-m.sh: fix use of test_must_fail
checkout_merged(): squelch false warning from some gcc
Test 'checkout -m -- path'
checkout -m: no need to insist on having all 3 stages
Merge branch 'tr/doc-sh-setup' into maint
* tr/doc-sh-setup:
git-sh-setup: make require_clean_work_tree part of the interface
* tr/doc-sh-setup:
git-sh-setup: make require_clean_work_tree part of the interface
Merge branch 'jk/maint-strbuf-missing-init' into maint
* jk/maint-strbuf-missing-init:
commit, merge: initialize static strbuf
* jk/maint-strbuf-missing-init:
commit, merge: initialize static strbuf
Merge branch 'jk/maint-push-v-is-verbose' into maint
* jk/maint-push-v-is-verbose:
make "git push -v" actually verbose
* jk/maint-push-v-is-verbose:
make "git push -v" actually verbose
Merge branch 'jk/http-push-to-empty' into maint
* jk/http-push-to-empty:
remote-curl: don't pass back fake refs
Conflicts:
remote-curl.c
* jk/http-push-to-empty:
remote-curl: don't pass back fake refs
Conflicts:
remote-curl.c
Merge branch 'jk/doc-fsck' into maint
* jk/doc-fsck:
docs: brush up obsolete bits of git-fsck manpage
* jk/doc-fsck:
docs: brush up obsolete bits of git-fsck manpage
Merge branch 'jc/maint-lf-to-crlf-keep-crlf' into maint
* jc/maint-lf-to-crlf-keep-crlf:
lf_to_crlf_filter(): resurrect CRLF->CRLF hack
* jc/maint-lf-to-crlf-keep-crlf:
lf_to_crlf_filter(): resurrect CRLF->CRLF hack
Merge branch 'ef/setenv-putenv' into maint
* ef/setenv-putenv:
compat/setenv.c: error if name contains '='
compat/setenv.c: update errno when erroring out
* ef/setenv-putenv:
compat/setenv.c: error if name contains '='
compat/setenv.c: update errno when erroring out
Merge branch 'jc/advice-doc' into maint
* jc/advice-doc:
advice: Document that they all default to true
* jc/advice-doc:
advice: Document that they all default to true
Merge branch 'jn/maint-sequencer-fixes' into maint
* jn/maint-sequencer-fixes:
revert: stop creating and removing sequencer-old directory
Revert "reset: Make reset remove the sequencer state"
revert: do not remove state until sequence is finished
revert: allow single-pick in the middle of cherry-pick sequence
revert: pass around rev-list args in already-parsed form
revert: allow cherry-pick --continue to commit before resuming
revert: give --continue handling its own function
* jn/maint-sequencer-fixes:
revert: stop creating and removing sequencer-old directory
Revert "reset: Make reset remove the sequencer state"
revert: do not remove state until sequence is finished
revert: allow single-pick in the middle of cherry-pick sequence
revert: pass around rev-list args in already-parsed form
revert: allow cherry-pick --continue to commit before resuming
revert: give --continue handling its own function
Merge branch 'jk/maint-snprintf-va-copy' into maint
* jk/maint-snprintf-va-copy:
compat/snprintf: don't look at va_list twice
* jk/maint-snprintf-va-copy:
compat/snprintf: don't look at va_list twice
Merge branch 'jk/maint-push-over-dav' into maint
* jk/maint-push-over-dav:
http-push: enable "proactive auth"
t5540: test DAV push with authentication
* jk/maint-push-over-dav:
http-push: enable "proactive auth"
t5540: test DAV push with authentication
Merge branch 'jk/maint-mv' into maint
* jk/maint-mv:
mv: be quiet about overwriting
mv: improve overwrite warning
mv: make non-directory destination error more clear
mv: honor --verbose flag
docs: mention "-k" for both forms of "git mv"
* jk/maint-mv:
mv: be quiet about overwriting
mv: improve overwrite warning
mv: make non-directory destination error more clear
mv: honor --verbose flag
docs: mention "-k" for both forms of "git mv"
Merge branch 'jk/fetch-no-tail-match-refs' into maint
* jk/fetch-no-tail-match-refs:
connect.c: drop path_match function
fetch-pack: match refs exactly
t5500: give fully-qualified refs to fetch-pack
drop "match" parameter from get_remote_heads
* jk/fetch-no-tail-match-refs:
connect.c: drop path_match function
fetch-pack: match refs exactly
t5500: give fully-qualified refs to fetch-pack
drop "match" parameter from get_remote_heads
Merge branch 'ew/keepalive' into maint
* ew/keepalive:
enable SO_KEEPALIVE for connected TCP sockets
* ew/keepalive:
enable SO_KEEPALIVE for connected TCP sockets
Merge branch 'ci/stripspace-docs' into maint
* ci/stripspace-docs:
Update documentation for stripspace
* ci/stripspace-docs:
Update documentation for stripspace
Merge branch 'jh/fast-import-notes' into maint
* jh/fast-import-notes:
fast-import: Fix incorrect fanout level when modifying existing notes refs
t9301: Add 2nd testcase exposing bugs in fast-import's notes fanout handling
t9301: Fix testcase covering up a bug in fast-import's notes fanout handling
* jh/fast-import-notes:
fast-import: Fix incorrect fanout level when modifying existing notes refs
t9301: Add 2nd testcase exposing bugs in fast-import's notes fanout handling
t9301: Fix testcase covering up a bug in fast-import's notes fanout handling
Merge branch 'aw/rebase-i-stop-on-failure-to-amend' into maint
* aw/rebase-i-stop-on-failure-to-amend:
rebase -i: interrupt rebase when "commit --amend" failed during "reword"
* aw/rebase-i-stop-on-failure-to-amend:
rebase -i: interrupt rebase when "commit --amend" failed during "reword"
Merge branch 'tj/maint-imap-send-remove-unused' into maint
* tj/maint-imap-send-remove-unused:
imap-send: Remove unused 'use_namespace' variable
* tj/maint-imap-send-remove-unused:
imap-send: Remove unused 'use_namespace' variable
Merge branch 'jn/branch-move-to-self' into maint
* jn/branch-move-to-self:
Allow checkout -B <current-branch> to update the current branch
branch: allow a no-op "branch -M <current-branch> HEAD"
* jn/branch-move-to-self:
Allow checkout -B <current-branch> to update the current branch
branch: allow a no-op "branch -M <current-branch> HEAD"
Merge branch 'na/strtoimax' into maint
* na/strtoimax:
Support sizes >=2G in various config options accepting 'g' sizes.
Compatibility: declare strtoimax() under NO_STRTOUMAX
Add strtoimax() compatibility function.
* na/strtoimax:
Support sizes >=2G in various config options accepting 'g' sizes.
Compatibility: declare strtoimax() under NO_STRTOUMAX
Add strtoimax() compatibility function.
Merge branch 'jk/refresh-porcelain-output' into maint
* jk/refresh-porcelain-output:
refresh_index: make porcelain output more specific
refresh_index: rename format variables
read-cache: let refresh_cache_ent pass up changed flags
* jk/refresh-porcelain-output:
refresh_index: make porcelain output more specific
refresh_index: rename format variables
read-cache: let refresh_cache_ent pass up changed flags
Fix an incorrect reference to --set-all.
Signed-off-by: Jelmer Vernooij <jelmer@samba.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jelmer Vernooij <jelmer@samba.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4: document and test submit options
Clarify there is a -M option, but no -C. These are both
configurable through variables.
Explain that the allowSubmit variable takes a comma-separated
list of branch names.
Catch earlier an invalid branch name given as an argument to
"git p4 clone".
Test option --origin, variable allowSubmit, and explicit master
branch name.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify there is a -M option, but no -C. These are both
configurable through variables.
Explain that the allowSubmit variable takes a comma-separated
list of branch names.
Catch earlier an invalid branch name given as an argument to
"git p4 clone".
Test option --origin, variable allowSubmit, and explicit master
branch name.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4: test and document --use-client-spec
The depot path is required, even with this option. Make sure
git-p4 fails and exits with non-zero.
Contents in the specified depot path will be rearranged according
to the client spec. Test this and add a note in the docs.
Leave an XXX suggesting that this is somewhat confusing behavior
that might be good to fix later.
Function stripRepoPath() looks at self.useClientSpec. Make sure
this is set both for command-line option --use-client-spec and
for configuration variable git-p4.useClientSpec. Test this.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The depot path is required, even with this option. Make sure
git-p4 fails and exits with non-zero.
Contents in the specified depot path will be rearranged according
to the client spec. Test this and add a note in the docs.
Leave an XXX suggesting that this is somewhat confusing behavior
that might be good to fix later.
Function stripRepoPath() looks at self.useClientSpec. Make sure
this is set both for command-line option --use-client-spec and
for configuration variable git-p4.useClientSpec. Test this.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4: test --keep-path
Make sure it leaves the path, below //depot, in git.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure it leaves the path, below //depot, in git.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4: test --max-changes
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4: document and test --import-local
Explain that it is needed on future syncs to find p4 branches
in refs/heads. Test this behavior.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explain that it is needed on future syncs to find p4 branches
in refs/heads. Test this behavior.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4: honor --changesfile option and test
When an explicit list of changes is given, it makes no sense to
use @all or @3,5 or any of the other p4 revision specifiers.
Make the code notice when this happens, instead of just ignoring
--changesfile. Test it.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an explicit list of changes is given, it makes no sense to
use @all or @3,5 or any of the other p4 revision specifiers.
Make the code notice when this happens, instead of just ignoring
--changesfile. Test it.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4: document and test clone --branch
Clone with --branch will not checkout HEAD, unless the branch
happens to be called the default refs/remotes/p4/master. The
--branch option is most useful with sync; give an example of
that.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clone with --branch will not checkout HEAD, unless the branch
happens to be called the default refs/remotes/p4/master. The
--branch option is most useful with sync; give an example of
that.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4: test cloning with two dirs, clarify doc
Document how git-p4 currently works when specifying multiple
depot paths:
1. No branches or directories are named.
2. Conflicting files are silently ignored---the last change
wins.
2. Option --destination is required, else the last path is construed
to be a directory.
3. Revision specifiers must be the same on all paths for them to
take effect.
Test this behavior.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document how git-p4 currently works when specifying multiple
depot paths:
1. No branches or directories are named.
2. Conflicting files are silently ignored---the last change
wins.
2. Option --destination is required, else the last path is construed
to be a directory.
3. Revision specifiers must be the same on all paths for them to
take effect.
Test this behavior.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4: clone does not use --git-dir
Complain if --git-dir is given during a clone. It has no
effect. Only --destination and --bare can change where the newly
cloned git dir will be.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complain if --git-dir is given during a clone. It has no
effect. Only --destination and --bare can change where the newly
cloned git dir will be.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4: introduce asciidoc documentation
Add proper documentation for git-p4. Delete the old .txt
documentation from contrib/fast-import.
Cc: Frans Klaver <fransklaver@gmail.com>
Cc: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add proper documentation for git-p4. Delete the old .txt
documentation from contrib/fast-import.
Cc: Frans Klaver <fransklaver@gmail.com>
Cc: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rename git-p4 tests
Use consistent naming for all tests: "t98<num>-git-p4-<topic>.sh"
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use consistent naming for all tests: "t98<num>-git-p4-<topic>.sh"
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update draft release notes in preparation for 1.7.9-rc0
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'tr/bash-read-unescaped'
* tr/bash-read-unescaped:
bash completion: use read -r everywhere
* tr/bash-read-unescaped:
bash completion: use read -r everywhere
Merge branch 'ab/sun-studio-portability'
* ab/sun-studio-portability:
Appease Sun Studio by renaming "tmpfile"
Fix a bitwise negation assignment issue spotted by Sun Studio
Fix an enum assignment issue spotted by Sun Studio
* ab/sun-studio-portability:
Appease Sun Studio by renaming "tmpfile"
Fix a bitwise negation assignment issue spotted by Sun Studio
Fix an enum assignment issue spotted by Sun Studio
Merge branch 'tr/doc-sh-setup'
* tr/doc-sh-setup:
git-sh-setup: make require_clean_work_tree part of the interface
* tr/doc-sh-setup:
git-sh-setup: make require_clean_work_tree part of the interface
Merge branch 'rr/revert-cherry-pick'
* rr/revert-cherry-pick:
t3502, t3510: clarify cherry-pick -m failure
t3510 (cherry-pick-sequencer): use exit status
revert: simplify getting commit subject in format_todo()
revert: tolerate extra spaces, tabs in insn sheet
revert: make commit subjects in insn sheet optional
revert: free msg in format_todo()
* rr/revert-cherry-pick:
t3502, t3510: clarify cherry-pick -m failure
t3510 (cherry-pick-sequencer): use exit status
revert: simplify getting commit subject in format_todo()
revert: tolerate extra spaces, tabs in insn sheet
revert: make commit subjects in insn sheet optional
revert: free msg in format_todo()
Merge branch 'tr/pty-all'
* tr/pty-all:
test-terminal: set output terminals to raw mode
* tr/pty-all:
test-terminal: set output terminals to raw mode
Merge branch 'jn/maint-gitweb-utf8-fix'
* jn/maint-gitweb-utf8-fix:
gitweb: Fix fallback mode of to_utf8 subroutine
gitweb: Output valid utf8 in git_blame_common('data')
gitweb: esc_html() site name for title in OPML
gitweb: Call to_utf8() on input string in chop_and_escape_str()
* jn/maint-gitweb-utf8-fix:
gitweb: Fix fallback mode of to_utf8 subroutine
gitweb: Output valid utf8 in git_blame_common('data')
gitweb: esc_html() site name for title in OPML
gitweb: Call to_utf8() on input string in chop_and_escape_str()
Update draft release notes to 1.7.9
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jk/maint-strbuf-missing-init'
* jk/maint-strbuf-missing-init:
commit, merge: initialize static strbuf
Conflicts:
builtin/merge.c
* jk/maint-strbuf-missing-init:
commit, merge: initialize static strbuf
Conflicts:
builtin/merge.c
Merge branch 'jc/maint-lf-to-crlf-keep-crlf'
* jc/maint-lf-to-crlf-keep-crlf:
lf_to_crlf_filter(): resurrect CRLF->CRLF hack
* jc/maint-lf-to-crlf-keep-crlf:
lf_to_crlf_filter(): resurrect CRLF->CRLF hack
Merge branch 'rs/diff-tree-combined-clean-up'
* rs/diff-tree-combined-clean-up:
submodule: use diff_tree_combined_merge() instead of diff_tree_combined()
pass struct commit to diff_tree_combined_merge()
use struct sha1_array in diff_tree_combined()
* rs/diff-tree-combined-clean-up:
submodule: use diff_tree_combined_merge() instead of diff_tree_combined()
pass struct commit to diff_tree_combined_merge()
use struct sha1_array in diff_tree_combined()
Merge branch 'jk/maint-push-v-is-verbose'
* jk/maint-push-v-is-verbose:
make "git push -v" actually verbose
* jk/maint-push-v-is-verbose:
make "git push -v" actually verbose
Merge branch 'tr/grep-threading'
* tr/grep-threading:
grep: disable threading in non-worktree case
grep: enable threading with -p and -W using lazy attribute lookup
grep: load funcname patterns for -W
* tr/grep-threading:
grep: disable threading in non-worktree case
grep: enable threading with -p and -W using lazy attribute lookup
grep: load funcname patterns for -W
Merge branch 'jk/pretty-reglog-ent'
* jk/pretty-reglog-ent:
pretty: give placeholders to reflog identity
* jk/pretty-reglog-ent:
pretty: give placeholders to reflog identity
Merge branch 'jk/follow-rename-score'
* jk/follow-rename-score:
use custom rename score during --follow
* jk/follow-rename-score:
use custom rename score during --follow
Merge branch 'jk/doc-fsck'
* jk/doc-fsck:
docs: brush up obsolete bits of git-fsck manpage
Conflicts:
Documentation/git-fsck.txt
* jk/doc-fsck:
docs: brush up obsolete bits of git-fsck manpage
Conflicts:
Documentation/git-fsck.txt
Merge branch 'nd/war-on-nul-in-commit'
* nd/war-on-nul-in-commit:
commit_tree(): refuse commit messages that contain NULs
Convert commit_tree() to take strbuf as message
merge: abort if fails to commit
Conflicts:
builtin/commit.c
commit.c
commit.h
* nd/war-on-nul-in-commit:
commit_tree(): refuse commit messages that contain NULs
Convert commit_tree() to take strbuf as message
merge: abort if fails to commit
Conflicts:
builtin/commit.c
commit.c
commit.h
Merge branch 'jk/maint-do-not-feed-stdin-to-tests'
* jk/maint-do-not-feed-stdin-to-tests:
test-lib: redirect stdin of tests
* jk/maint-do-not-feed-stdin-to-tests:
test-lib: redirect stdin of tests
Merge branch 'jn/test-cleanup-7006'
* jn/test-cleanup-7006:
test: errors preparing for a test are not special
* jn/test-cleanup-7006:
test: errors preparing for a test are not special
Merge branch 'ef/setenv-putenv'
* ef/setenv-putenv:
compat/setenv.c: error if name contains '='
compat/setenv.c: update errno when erroring out
* ef/setenv-putenv:
compat/setenv.c: error if name contains '='
compat/setenv.c: update errno when erroring out
Merge branch 'jk/git-prompt'
* jk/git-prompt:
contrib: add credential helper for OS X Keychain
Makefile: OS X has /dev/tty
Makefile: linux has /dev/tty
credential: use git_prompt instead of git_getpass
prompt: use git_terminal_prompt
add generic terminal prompt function
refactor git_getpass into generic prompt function
move git_getpass to its own source file
imap-send: don't check return value of git_getpass
imap-send: avoid buffer overflow
Conflicts:
Makefile
* jk/git-prompt:
contrib: add credential helper for OS X Keychain
Makefile: OS X has /dev/tty
Makefile: linux has /dev/tty
credential: use git_prompt instead of git_getpass
prompt: use git_terminal_prompt
add generic terminal prompt function
refactor git_getpass into generic prompt function
move git_getpass to its own source file
imap-send: don't check return value of git_getpass
imap-send: avoid buffer overflow
Conflicts:
Makefile
Merge branch 'jk/http-push-to-empty'
* jk/http-push-to-empty:
remote-curl: don't pass back fake refs
Conflicts:
remote-curl.c
* jk/http-push-to-empty:
remote-curl: don't pass back fake refs
Conflicts:
remote-curl.c
Sync with v1.7.8.1
Git 1.7.8.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jl/submodule-status-failure-report' into maint
* jl/submodule-status-failure-report:
diff/status: print submodule path when looking for changes fails
* jl/submodule-status-failure-report:
diff/status: print submodule path when looking for changes fails
Merge branch 'tr/userdiff-c-returns-pointer' into maint
* tr/userdiff-c-returns-pointer:
userdiff: allow * between cpp funcname words
* tr/userdiff-c-returns-pointer:
userdiff: allow * between cpp funcname words
Merge branch 'bc/maint-apply-check-no-patch' into maint
* bc/maint-apply-check-no-patch:
builtin/apply.c: report error on failure to recognize input
t/t4131-apply-fake-ancestor.sh: fix broken test
* bc/maint-apply-check-no-patch:
builtin/apply.c: report error on failure to recognize input
t/t4131-apply-fake-ancestor.sh: fix broken test
Merge branch 'cn/maint-lf-to-crlf-filter' into maint
* cn/maint-lf-to-crlf-filter:
lf_to_crlf_filter(): tell the caller we added "\n" when draining
convert: track state in LF-to-CRLF filter
* cn/maint-lf-to-crlf-filter:
lf_to_crlf_filter(): tell the caller we added "\n" when draining
convert: track state in LF-to-CRLF filter
Merge branch 'jk/maint-upload-archive' into maint
* jk/maint-upload-archive:
archive: don't let remote clients get unreachable commits
* jk/maint-upload-archive:
archive: don't let remote clients get unreachable commits
bash completion: use read -r everywhere
We use the 'read' command without -r, so that it treats '\' as an
escape character, in several places. This breaks the loop reading
refnames from git-for-each-ref in __git_refs() if there are refnames
such as "foo'bar", in which case for-each-ref helpfully quotes them as
$ git update-ref "refs/remotes/test/foo'bar" HEAD
$ git for-each-ref --shell --format="ref=%(refname:short)" "refs/remotes"
ref='test/foo'\''bar'
Interpolating the \' here will read "ref='test/foo'''bar'" instead, and
eval then chokes on the unbalanced quotes.
However, since none of the read loops _want_ to have backslashes
interpolated, it's much safer to use read -r everywhere.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use the 'read' command without -r, so that it treats '\' as an
escape character, in several places. This breaks the loop reading
refnames from git-for-each-ref in __git_refs() if there are refnames
such as "foo'bar", in which case for-each-ref helpfully quotes them as
$ git update-ref "refs/remotes/test/foo'bar" HEAD
$ git for-each-ref --shell --format="ref=%(refname:short)" "refs/remotes"
ref='test/foo'\''bar'
Interpolating the \' here will read "ref='test/foo'''bar'" instead, and
eval then chokes on the unbalanced quotes.
However, since none of the read loops _want_ to have backslashes
interpolated, it's much safer to use read -r everywhere.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
clone: the -o option has nothing to do with <branch>
It is to give an alternate <name> instead of "origin" to the remote
we are cloning from.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is to give an alternate <name> instead of "origin" to the remote
we are cloning from.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/log: remove redundant initialization
"abbrev" and "commit_format" in struct rev_info get initialized in
init_revisions - no need to reinit in cmd_log_init_defaults.
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"abbrev" and "commit_format" in struct rev_info get initialized in
init_revisions - no need to reinit in cmd_log_init_defaults.
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'ms/commit-cc-option-helpstring' into maint
* ms/commit-cc-option-helpstring:
builtin/commit: add missing '/' in help message
* ms/commit-cc-option-helpstring:
builtin/commit: add missing '/' in help message
builtin/commit: add missing '/' in help message
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Appease Sun Studio by renaming "tmpfile"
On Solaris the system headers define the "tmpfile" name, which'll
cause Git compiled with Sun Studio 12 Update 1 to whine about us
redefining the name:
"pack-write.c", line 76: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"sha1_file.c", line 2455: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"fast-import.c", line 858: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"builtin/index-pack.c", line 175: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
Just renaming the "tmpfile" variable to "tmp_file" in the relevant
places is the easiest way to fix this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Solaris the system headers define the "tmpfile" name, which'll
cause Git compiled with Sun Studio 12 Update 1 to whine about us
redefining the name:
"pack-write.c", line 76: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"sha1_file.c", line 2455: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"fast-import.c", line 858: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"builtin/index-pack.c", line 175: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
Just renaming the "tmpfile" variable to "tmp_file" in the relevant
places is the easiest way to fix this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bitwise negation assignment issue spotted by Sun Studio
Change direct and indirect assignments of the bitwise negation of 0 to
uint32_t variables to have a "U" suffix. I.e. ~0U instead of ~0. This
eliminates warnings under Sun Studio 12 Update 1:
"vcs-svn/string_pool.c", line 11: warning: initializer will be sign-extended: -1 (E_INIT_SIGN_EXTEND)
"vcs-svn/string_pool.c", line 81: warning: initializer will be sign-extended: -1 (E_INIT_SIGN_EXTEND)
"vcs-svn/repo_tree.c", line 112: warning: initializer will be sign-extended: -1 (E_INIT_SIGN_EXTEND)
"vcs-svn/repo_tree.c", line 112: warning: initializer will be sign-extended: -1 (E_INIT_SIGN_EXTEND)
"test-treap.c", line 34: warning: initializer will be sign-extended: -1 (E_INIT_SIGN_EXTEND)
The semantics are still the same as demonstrated by this program:
$ cat test.c && make test && ./test
#include <stdio.h>
#include <stdint.h>
int main(void)
{
uint32_t foo = ~0;
uint32_t bar = ~0U;
printf("foo = <%u> bar = <%u>\n", foo, bar);
return 0;
}
cc test.c -o test
"test.c", line 5: warning: initializer will be sign-extended: -1
foo = <4294967295> bar = <4294967295>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change direct and indirect assignments of the bitwise negation of 0 to
uint32_t variables to have a "U" suffix. I.e. ~0U instead of ~0. This
eliminates warnings under Sun Studio 12 Update 1:
"vcs-svn/string_pool.c", line 11: warning: initializer will be sign-extended: -1 (E_INIT_SIGN_EXTEND)
"vcs-svn/string_pool.c", line 81: warning: initializer will be sign-extended: -1 (E_INIT_SIGN_EXTEND)
"vcs-svn/repo_tree.c", line 112: warning: initializer will be sign-extended: -1 (E_INIT_SIGN_EXTEND)
"vcs-svn/repo_tree.c", line 112: warning: initializer will be sign-extended: -1 (E_INIT_SIGN_EXTEND)
"test-treap.c", line 34: warning: initializer will be sign-extended: -1 (E_INIT_SIGN_EXTEND)
The semantics are still the same as demonstrated by this program:
$ cat test.c && make test && ./test
#include <stdio.h>
#include <stdint.h>
int main(void)
{
uint32_t foo = ~0;
uint32_t bar = ~0U;
printf("foo = <%u> bar = <%u>\n", foo, bar);
return 0;
}
cc test.c -o test
"test.c", line 5: warning: initializer will be sign-extended: -1
foo = <4294967295> bar = <4294967295>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an enum assignment issue spotted by Sun Studio
In builtin/fast-export.c we'd assign to variables of the
tag_of_filtered_mode enum type with constants defined for the
signed_tag_mode enum.
We'd get the intended value since both the value we were assigning
with and the one we actually wanted had the same positional within
their respective enums, but doing it this way makes no sense.
This issue was spotted by Sun Studio 12 Update 1:
"builtin/fast-export.c", line 54: warning: enum type mismatch: op "=" (E_ENUM_TYPE_MISMATCH_OP)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In builtin/fast-export.c we'd assign to variables of the
tag_of_filtered_mode enum type with constants defined for the
signed_tag_mode enum.
We'd get the intended value since both the value we were assigning
with and the one we actually wanted had the same positional within
their respective enums, but doing it this way makes no sense.
This issue was spotted by Sun Studio 12 Update 1:
"builtin/fast-export.c", line 54: warning: enum type mismatch: op "=" (E_ENUM_TYPE_MISMATCH_OP)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
builtin/init-db.c: eliminate -Wformat warning on Solaris
* maint:
builtin/init-db.c: eliminate -Wformat warning on Solaris
builtin/init-db.c: eliminate -Wformat warning on Solaris
On Solaris systems we'd warn about an implicit cast of mode_t when we
printed things out with the %d format. We'd get this warning under GCC
4.6.0 with Solaris headers:
builtin/init-db.c: In function ‘separate_git_dir’:
builtin/init-db.c:354:4: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘mode_t’ [-Wformat]
We've been doing this ever since v1.7.4.1-296-gb57fb80. Just work
around this by adding an explicit cast.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Solaris systems we'd warn about an implicit cast of mode_t when we
printed things out with the %d format. We'd get this warning under GCC
4.6.0 with Solaris headers:
builtin/init-db.c: In function ‘separate_git_dir’:
builtin/init-db.c:354:4: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘mode_t’ [-Wformat]
We've been doing this ever since v1.7.4.1-296-gb57fb80. Just work
around this by adding an explicit cast.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-sh-setup: make require_clean_work_tree part of the interface
92c62a3 (Porcelain scripts: Rewrite cryptic "needs update" error
message, 2010-10-19) refactored git's own checking to a function in
git-sh-setup. This is a very useful thing for script writers, so
document it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
92c62a3 (Porcelain scripts: Rewrite cryptic "needs update" error
message, 2010-10-19) refactored git's own checking to a function in
git-sh-setup. This is a very useful thing for script writers, so
document it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'mh/ref-api'
* mh/ref-api:
add_ref(): take a (struct ref_entry *) parameter
create_ref_entry(): extract function from add_ref()
repack_without_ref(): remove temporary
resolve_gitlink_ref_recursive(): change to work with struct ref_cache
Pass a (ref_cache *) to the resolve_gitlink_*() helper functions
resolve_gitlink_ref(): improve docstring
get_ref_dir(): change signature
refs: change signatures of get_packed_refs() and get_loose_refs()
is_dup_ref(): extract function from sort_ref_array()
add_ref(): add docstring
parse_ref_line(): add docstring
is_refname_available(): remove the "quiet" argument
clear_ref_array(): rename from free_ref_array()
refs: rename parameters result -> sha1
refs: rename "refname" variables
struct ref_entry: document name member
Conflicts:
cache.h
refs.c
* mh/ref-api:
add_ref(): take a (struct ref_entry *) parameter
create_ref_entry(): extract function from add_ref()
repack_without_ref(): remove temporary
resolve_gitlink_ref_recursive(): change to work with struct ref_cache
Pass a (ref_cache *) to the resolve_gitlink_*() helper functions
resolve_gitlink_ref(): improve docstring
get_ref_dir(): change signature
refs: change signatures of get_packed_refs() and get_loose_refs()
is_dup_ref(): extract function from sort_ref_array()
add_ref(): add docstring
parse_ref_line(): add docstring
is_refname_available(): remove the "quiet" argument
clear_ref_array(): rename from free_ref_array()
refs: rename parameters result -> sha1
refs: rename "refname" variables
struct ref_entry: document name member
Conflicts:
cache.h
refs.c
Merge branch 'jc/advice-doc'
* jc/advice-doc:
advice: Document that they all default to true
* jc/advice-doc:
advice: Document that they all default to true
Merge branch 'jc/request-pull-show-head-4'
* jc/request-pull-show-head-4:
request-pull: do not emit "tag" before the tagname
request-pull: update the "pull" command generation logic
* jc/request-pull-show-head-4:
request-pull: do not emit "tag" before the tagname
request-pull: update the "pull" command generation logic
Merge branch 'jc/pull-signed-tag'
* jc/pull-signed-tag:
commit: do not lose mergetag header when not amending
* jc/pull-signed-tag:
commit: do not lose mergetag header when not amending
Merge branch 'jc/checkout-m-twoway'
* jc/checkout-m-twoway:
t/t2023-checkout-m.sh: fix use of test_must_fail
* jc/checkout-m-twoway:
t/t2023-checkout-m.sh: fix use of test_must_fail
t/t2023-checkout-m.sh: fix use of test_must_fail
Change an invocation of test_must_fail() to be inside a
test_expect_success() as is our usual pattern. Having it outside
caused our tests to fail under prove(1) since we wouldn't print a
newline before TAP output:
CONFLICT (content): Merge conflict in both.txt
# GETTEXT POISON #ok 2 - -m restores 2-way conflicted+resolved file
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change an invocation of test_must_fail() to be inside a
test_expect_success() as is our usual pattern. Having it outside
caused our tests to fail under prove(1) since we wouldn't print a
newline before TAP output:
CONFLICT (content): Merge conflict in both.txt
# GETTEXT POISON #ok 2 - -m restores 2-way conflicted+resolved file
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>