Code

git.git
13 years agoConvert ce_path_match() to use match_pathspec_depth()
Nguyễn Thái Ngọc Duy [Wed, 15 Dec 2010 15:02:50 +0000 (22:02 +0700)]
Convert ce_path_match() to use match_pathspec_depth()

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoConvert ce_path_match() to use struct pathspec
Nguyễn Thái Ngọc Duy [Fri, 17 Dec 2010 12:43:07 +0000 (19:43 +0700)]
Convert ce_path_match() to use struct pathspec

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agostruct rev_info: convert prune_data to struct pathspec
Nguyễn Thái Ngọc Duy [Fri, 17 Dec 2010 12:43:06 +0000 (19:43 +0700)]
struct rev_info: convert prune_data to struct pathspec

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agopathspec: add match_pathspec_depth()
Nguyễn Thái Ngọc Duy [Wed, 15 Dec 2010 15:02:48 +0000 (22:02 +0700)]
pathspec: add match_pathspec_depth()

match_pathspec_depth() is a clone of match_pathspec() except that it
can take depth limit. Computation is a bit lighter compared to
match_pathspec() because it's usually precomputed and stored in struct
pathspec.

In long term, match_pathspec() and match_one() should be removed in
favor of this function.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agotree_entry_interesting(): optimize wildcard matching when base is matched
Nguyễn Thái Ngọc Duy [Wed, 15 Dec 2010 15:02:47 +0000 (22:02 +0700)]
tree_entry_interesting(): optimize wildcard matching when base is matched

If base is already matched, skip that part when calling
fnmatch(). This happens quite often if users start a command from
worktree's subdirectory and prefix is usually prepended to all
pathspecs.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agotree_entry_interesting(): support wildcard matching
Nguyễn Thái Ngọc Duy [Wed, 15 Dec 2010 15:02:46 +0000 (22:02 +0700)]
tree_entry_interesting(): support wildcard matching

never_interesting optimization is disabled if there is any wildcard
pathspec, even if it only matches exactly on trees.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agotree_entry_interesting(): fix depth limit with overlapping pathspecs
Nguyễn Thái Ngọc Duy [Wed, 15 Dec 2010 15:02:45 +0000 (22:02 +0700)]
tree_entry_interesting(): fix depth limit with overlapping pathspecs

Suppose we have two pathspecs 'a' and 'a/b' (both are dirs) and depth
limit 1. In current code, pathspecs are checked in input order. When
'a/b' is checked against pathspec 'a', it fails depth limit and
therefore is excluded, although it should match 'a/b' pathspec.

This patch reorders all pathspecs alphabetically, then teaches
tree_entry_interesting() to check against the deepest pathspec first,
so depth limit of a shallower pathspec won't affect a deeper one.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agotree_entry_interesting(): support depth limit
Nguyễn Thái Ngọc Duy [Wed, 15 Dec 2010 15:02:44 +0000 (22:02 +0700)]
tree_entry_interesting(): support depth limit

This is needed to replace pathspec_matches() in builtin/grep.c.

max_depth == -1 means infinite depth. Depth limit is only effective
when pathspec.recursive == 1. When pathspec.recursive == 0, the
behavior depends on match functions: non-recursive for
tree_entry_interesting() and recursive for match_pathspec{,_depth}

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agotree_entry_interesting(): refactor into separate smaller functions
Nguyễn Thái Ngọc Duy [Wed, 15 Dec 2010 15:02:43 +0000 (22:02 +0700)]
tree_entry_interesting(): refactor into separate smaller functions

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agodiff-tree: convert base+baselen to writable strbuf
Nguyễn Thái Ngọc Duy [Wed, 15 Dec 2010 15:02:42 +0000 (22:02 +0700)]
diff-tree: convert base+baselen to writable strbuf

In traversing trees, a full path is splitted into two parts: base
directory and entry. They are however quite often concatenated
whenever a full path is needed. Current code allocates a new buffer,
do two memcpy(), use it, then release.

Instead this patch turns "base" to a writable, extendable buffer. When
a concatenation is needed, the callee only needs to append "entry" to
base, use it, then truncate the entry out again. "base" must remain
unchanged before and after entering a function.

This avoids quite a bit of malloc() and memcpy().

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoglossary: define pathspec
Jonathan Nieder [Wed, 15 Dec 2010 15:02:41 +0000 (22:02 +0700)]
glossary: define pathspec

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMove tree_entry_interesting() to tree-walk.c and export it
Nguyễn Thái Ngọc Duy [Wed, 15 Dec 2010 15:02:40 +0000 (22:02 +0700)]
Move tree_entry_interesting() to tree-walk.c and export it

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agotree_entry_interesting(): remove dependency on struct diff_options
Nguyễn Thái Ngọc Duy [Wed, 15 Dec 2010 15:02:39 +0000 (22:02 +0700)]
tree_entry_interesting(): remove dependency on struct diff_options

This function can be potentially used in more places than just
tree-diff.c. "struct diff_options" does not make much sense outside
diff_tree_sha1().

While removing the use of diff_options, it also removes
tree_entry_extract() call, which means S_ISDIR() uses the entry->mode
directly, without being filtered by canon_mode() (called internally
inside tree_entry_extract).

The only use of the mode information in this function is to check the
type of the entry by giving it to S_ISDIR() macro, and the result does
not change with or without canon_mode(), so it is ok to bypass
tree_entry_extract().

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoConvert struct diff_options to use struct pathspec
Nguyễn Thái Ngọc Duy [Wed, 15 Dec 2010 15:02:38 +0000 (22:02 +0700)]
Convert struct diff_options to use struct pathspec

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agodiff-no-index: use diff_tree_setup_paths()
Nguyễn Thái Ngọc Duy [Wed, 15 Dec 2010 15:02:37 +0000 (22:02 +0700)]
diff-no-index: use diff_tree_setup_paths()

diff_options.{paths,nr_paths} will be removed later. Do not
modify them directly.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoAdd struct pathspec
Nguyễn Thái Ngọc Duy [Wed, 15 Dec 2010 15:02:36 +0000 (22:02 +0700)]
Add struct pathspec

The old pathspec structure remains as pathspec.raw[]. New things are
stored in pathspec.items[]. There's no guarantee that the pathspec
order in raw[] is exactly as in items[].

raw[] is external (source) data and is untouched by pathspec
manipulation functions. It eases migration from old const char ** to
this new struct.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoGit 1.7.4 ko-master v1.7.4
Junio C Hamano [Sun, 30 Jan 2011 19:53:13 +0000 (11:53 -0800)]
Git 1.7.4

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoDon't pass "--xhtml" to hightlight in gitweb.perl script.
Adam Tkac [Thu, 27 Jan 2011 12:51:51 +0000 (13:51 +0100)]
Don't pass "--xhtml" to hightlight in gitweb.perl script.

The "--xhtml" option is supported only in highlight < 3.0. There is no option
to enforce (X)HTML output format compatible with both highlight < 3.0 and
highlight >= 3.0. However default output format is HTML so we don't need to
explicitly specify it.

Signed-off-by: Adam Tkac <atkac@redhat.com>
Helped-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'maint'
Junio C Hamano [Thu, 27 Jan 2011 18:27:49 +0000 (10:27 -0800)]
Merge branch 'maint'

* maint:
  rebase -i: clarify in-editor documentation of "exec"
  tests: sanitize more git environment variables
  fast-import: treat filemodify with empty tree as delete
  rebase: give a better error message for bogus branch
  rebase: use explicit "--" with checkout

Conflicts:
t/t9300-fast-import.sh

13 years agorebase -i: clarify in-editor documentation of "exec" ko-maint
Jonathan Nieder [Fri, 21 Jan 2011 00:36:24 +0000 (18:36 -0600)]
rebase -i: clarify in-editor documentation of "exec"

The hints in the current "instruction sheet" template look like so:

 # Rebase 3f14246..a1d7e01 onto 3f14246
 #
 # Commands:
 #  p, pick = use commit
 #  r, reword = use commit, but edit the commit message
 #  e, edit = use commit, but stop for amending
 #  s, squash = use commit, but meld into previous commit
 #  f, fixup = like "squash", but discard this commit's log message
 #  x <cmd>, exec <cmd> = Run a shell command <cmd>, and stop if it fails
 #
 # If you remove a line here THAT COMMIT WILL BE LOST.
 # However, if you remove everything, the rebase will be aborted.
 #

This does not make it clear that the format of each line is

<insn> <commit id> <explanatory text that will be printed>

but the reader will probably infer that from the automatically
generated pick examples above it.

What about the "exec" instruction?  By analogy, I might imagine that
the format of that line is "exec <command> <explanatory text>", and
the "x <cmd>" hint does not address that question (at first I read it
as taking an argument <cmd> that is the name of a shell).  Meanwhile,
the mention of <cmd> makes the hints harder to scan as a table.

So remove the <cmd> and add some words to remind the reader that
"exec" runs a command named by the rest of the line.  To make room, it
is left to the manpage to explain that that command is run using
$SHELL and that nonzero status from that command will pause the
rebase.

Wording from Junio.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agotests: sanitize more git environment variables
Jeff King [Wed, 26 Jan 2011 20:33:32 +0000 (15:33 -0500)]
tests: sanitize more git environment variables

These variables should generally not be set in one's
environment, but they do get set by rebase, which means
doing an interactive rebase like:

  pick abcd1234 foo
  exec make test

will cause false negatives in the test suite.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'jn/fast-import-empty-tree-removal' into maint
Junio C Hamano [Thu, 27 Jan 2011 18:23:53 +0000 (10:23 -0800)]
Merge branch 'jn/fast-import-empty-tree-removal' into maint

* jn/fast-import-empty-tree-removal:
  fast-import: treat filemodify with empty tree as delete

13 years agofast-import: treat filemodify with empty tree as delete
Jonathan Nieder [Thu, 27 Jan 2011 06:07:49 +0000 (00:07 -0600)]
fast-import: treat filemodify with empty tree as delete

Normal git processes do not allow one to build a tree with an empty
subtree entry without trying hard at it.  This is in keeping with the
general UI philosophy: git tracks content, not empty directories.

v1.7.3-rc0~75^2 (2010-06-30) changed that by making it easy to include
an empty subtree in fast-import's active commit:

M 040000 4b825dc642cb6eb9a060e54bf8d69288fbee4904 subdir

One can trigger this by reading an empty tree (for example, the tree
corresponding to an empty root commit) and trying to move it to a
subtree.  It is better and more closely analogous to 'git read-tree
--prefix' to treat such commands as requests to remove the subtree.

Noticed-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agorebase: give a better error message for bogus branch
Jeff King [Thu, 27 Jan 2011 00:27:11 +0000 (19:27 -0500)]
rebase: give a better error message for bogus branch

When you give a non-existent branch to git-rebase, it spits
out the usage. This can be confusing, since you may
understand the usage just fine, but simply have made a
mistake in the branch name.

Before:

  $ git rebase origin bogus
  Usage: git rebase ...

After:

  $ git rebase origin bogus
  fatal: no such branch: bogus
  Usage: git rebase ...

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agorebase: use explicit "--" with checkout
Jeff King [Thu, 27 Jan 2011 00:26:59 +0000 (19:26 -0500)]
rebase: use explicit "--" with checkout

In the case of a ref/pathname conflict, checkout will
already do the right thing and checkout the ref. However,
for a non-existant ref, this has two advantages:

  1. If a file with that pathname exists, rebase will
     refresh the file from the index and then rebase the
     current branch instead of producing an error.

  2. If no such file exists, the error message using an
     explicit "--" is better:

       # before
       $ git rebase -i origin bogus
       error: pathspec 'bogus' did not match any file(s) known to git.
       Could not checkout bogus

       # after
       $ git rebase -i origin bogus
       fatal: invalid reference: bogus
       Could not checkout bogus

The problems seem to be trigger-able only through "git
rebase -i", as regular git-rebase checks the validity of the
branch parameter as a ref very early on. However, it doesn't
hurt to be defensive.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoGit 1.7.4-rc3 v1.7.4-rc3
Junio C Hamano [Mon, 24 Jan 2011 19:00:00 +0000 (11:00 -0800)]
Git 1.7.4-rc3

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'as/userdiff-pascal'
Junio C Hamano [Mon, 24 Jan 2011 18:54:12 +0000 (10:54 -0800)]
Merge branch 'as/userdiff-pascal'

* as/userdiff-pascal:
  userdiff: match Pascal class methods

13 years agoMerge branch 'jn/setup-fixes'
Junio C Hamano [Mon, 24 Jan 2011 18:53:09 +0000 (10:53 -0800)]
Merge branch 'jn/setup-fixes'

* jn/setup-fixes:
  t1510: fix typo in the comment of a test
  Documentation updates for 'GIT_WORK_TREE without GIT_DIR' historical usecase
  Subject: setup: officially support --work-tree without --git-dir
  tests: compress the setup tests
  tests: cosmetic improvements to the repo-setup test
  t/README: hint about using $(pwd) rather than $PWD in tests
  Fix expected values of setup tests on Windows

13 years agot1510: fix typo in the comment of a test
Jonathan Nieder [Sat, 22 Jan 2011 20:02:48 +0000 (14:02 -0600)]
t1510: fix typo in the comment of a test

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoDocumentation updates for 'GIT_WORK_TREE without GIT_DIR' historical usecase
Junio C Hamano [Sun, 23 Jan 2011 23:49:41 +0000 (15:49 -0800)]
Documentation updates for 'GIT_WORK_TREE without GIT_DIR' historical usecase

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoSubject: setup: officially support --work-tree without --git-dir
Jonathan Nieder [Wed, 19 Jan 2011 12:42:30 +0000 (06:42 -0600)]
Subject: setup: officially support --work-tree without --git-dir

The original intention of --work-tree was to allow people to work in a
subdirectory of their working tree that does not have an embedded .git
directory.  Because their working tree, which their $cwd was in, did not
have an embedded .git, they needed to use $GIT_DIR to specify where it is,
and because this meant there was no way to discover where the root level
of the working tree was, so we needed to add $GIT_WORK_TREE to tell git
where it was.

However, this facility has long been (mis)used by people's scripts to
start git from a working tree _with_ an embedded .git directory, let git
find .git directory, and then pretend as if an unrelated directory were
the associated working tree of the .git directory found by the discovery
process.  It happens to work in simple cases, and is not worth causing
"regression" to these scripts.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoDocumentation: do not treat reset --keep as a special case
Jonathan Nieder [Fri, 21 Jan 2011 18:37:34 +0000 (12:37 -0600)]
Documentation: do not treat reset --keep as a special case

The current treatment of "git reset --keep" emphasizes how it
differs from --hard (treatment of local changes) and how it breaks
down into plumbing (git read-tree -m -u HEAD <commit> followed by git
update-ref HEAD <commit>).  This can discourage people from using
it, since it might seem to be a complex or niche option.

Better to emphasize what the --keep flag is intended for --- moving
the index and worktree from one commit to another, like "git checkout"
would --- so the reader can make a more informed decision about the
appropriate situations in which to use it.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoCorrectly report corrupted objects
Björn Steinbrink [Thu, 20 Jan 2011 20:12:20 +0000 (21:12 +0100)]
Correctly report corrupted objects

The errno check added in commit 3ba7a06 "A loose object is not corrupt
if it cannot be read due to EMFILE" only checked for whether errno is
not ENOENT and thus incorrectly treated "no error" as an error
condition.

Because of that, it never reached the code path that would report that
the object is corrupted and instead caused funny errors like:

  fatal: failed to read object 333c4768ce595793fdab1ef3a036413e2a883853: Success

So we have to extend the check to cover the case in which the object
file was successfully read, but its contents are corrupted.

Reported-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agotests: compress the setup tests
Jonathan Nieder [Wed, 19 Jan 2011 12:40:51 +0000 (06:40 -0600)]
tests: compress the setup tests

New test helpers:

 - setup_repo, to initialize a repository or gitfile pointing to a
   repository, with core.bare and core.worktree set as specified;

 - try_case, to run setup from a given directory and validate the
   result, with GIT_DIR and GIT_WORK_TREE set as specified;

 - try_repo, to initialize a repository and call "try_case" from the
   toplevel and a subdirectory;

 - run_wt_tests, to run a battery of tests that check for sane
   behavior when GIT_WORK_TREE is set to various positions relative to
   the .git dir and cwd.

Use these helpers to make the test shorter, less repetitive, and (one
hopes) easier to understand and modify.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agotests: cosmetic improvements to the repo-setup test
Jonathan Nieder [Wed, 19 Jan 2011 12:38:22 +0000 (06:38 -0600)]
tests: cosmetic improvements to the repo-setup test

Give an overview in "sh t1510-repo-setup.sh --help" output.
Waste some vertical and horizontal space for clearer code.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'maint'
Junio C Hamano [Wed, 19 Jan 2011 16:33:54 +0000 (08:33 -0800)]
Merge branch 'maint'

* maint:
  exec_cmd: remove unused extern

13 years agoexec_cmd: remove unused extern
Erik Faye-Lund [Mon, 10 Jan 2011 22:00:49 +0000 (23:00 +0100)]
exec_cmd: remove unused extern

This definition was added by commit 77cb17e9, but it's left unused since
commit 511707d. Remove the left-over definition.

Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'jn/gitweb-no-logo' into maint
Junio C Hamano [Wed, 19 Jan 2011 16:26:47 +0000 (08:26 -0800)]
Merge branch 'jn/gitweb-no-logo' into maint

* jn/gitweb-no-logo:
  gitweb: make logo optional

13 years agoMerge branch 'jk/diff-driver-binary-doc' into maint
Junio C Hamano [Wed, 19 Jan 2011 16:26:44 +0000 (08:26 -0800)]
Merge branch 'jk/diff-driver-binary-doc' into maint

* jk/diff-driver-binary-doc:
  docs: explain diff.*.binary option

13 years agoMerge branch 'tr/submodule-relative-scp-url' into maint
Junio C Hamano [Wed, 19 Jan 2011 16:26:41 +0000 (08:26 -0800)]
Merge branch 'tr/submodule-relative-scp-url' into maint

* tr/submodule-relative-scp-url:
  submodule: fix relative url parsing for scp-style origin

13 years agoMerge branch 'rj/maint-difftool-cygwin-workaround' into maint
Junio C Hamano [Wed, 19 Jan 2011 16:26:24 +0000 (08:26 -0800)]
Merge branch 'rj/maint-difftool-cygwin-workaround' into maint

* rj/maint-difftool-cygwin-workaround:
  difftool: Fix failure on Cygwin

13 years agoMerge branch 'rj/maint-test-fixes' into maint
Junio C Hamano [Wed, 19 Jan 2011 16:26:17 +0000 (08:26 -0800)]
Merge branch 'rj/maint-test-fixes' into maint

* rj/maint-test-fixes:
  t9501-*.sh: Fix a test failure on Cygwin
  lib-git-svn.sh: Add check for mis-configured web server variables
  lib-git-svn.sh: Avoid setting web server variables unnecessarily
  t9142: Move call to start_httpd into the setup test
  t3600-rm.sh: Don't pass a non-existent prereq to test #15

13 years agoMerge branch 'jn/maint-gitweb-pathinfo-fix' into maint
Junio C Hamano [Wed, 19 Jan 2011 16:26:04 +0000 (08:26 -0800)]
Merge branch 'jn/maint-gitweb-pathinfo-fix' into maint

* jn/maint-gitweb-pathinfo-fix:
  gitweb: Fix handling of whitespace in generated links

13 years agoMerge branch 'ak/describe-exact' into maint
Junio C Hamano [Wed, 19 Jan 2011 16:25:52 +0000 (08:25 -0800)]
Merge branch 'ak/describe-exact' into maint

* ak/describe-exact:
  describe: Delay looking up commits until searching for an inexact match
  describe: Store commit_names in a hash table by commit SHA1
  describe: Do not use a flex array in struct commit_name
  describe: Use for_each_rawref

13 years agoMerge branch 'jn/maint-fast-import-object-reuse' into maint
Junio C Hamano [Wed, 19 Jan 2011 16:25:46 +0000 (08:25 -0800)]
Merge branch 'jn/maint-fast-import-object-reuse' into maint

* jn/maint-fast-import-object-reuse:
  fast-import: insert new object entries at start of hash bucket

13 years agoMerge branch 'jn/submodule-b-current' into maint
Junio C Hamano [Wed, 19 Jan 2011 16:25:41 +0000 (08:25 -0800)]
Merge branch 'jn/submodule-b-current' into maint

* jn/submodule-b-current:
  git submodule: Remove now obsolete tests before cloning a repo
  git submodule -b ... of current HEAD fails

13 years agoMerge branch 'jc/maint-svn-info-test-fix' into maint
Junio C Hamano [Wed, 19 Jan 2011 16:25:38 +0000 (08:25 -0800)]
Merge branch 'jc/maint-svn-info-test-fix' into maint

* jc/maint-svn-info-test-fix:
  t9119: do not compare "Text Last Updated" line from "svn info"

13 years agoMerge branch 'nd/maint-relative' into maint
Junio C Hamano [Wed, 19 Jan 2011 16:25:31 +0000 (08:25 -0800)]
Merge branch 'nd/maint-relative' into maint

* nd/maint-relative:
  get_cwd_relative(): do not misinterpret root path

13 years agoDocumentation/fast-import: put explanation of M 040000 <dataref> "" in context
Jonathan Nieder [Sun, 16 Jan 2011 02:22:35 +0000 (20:22 -0600)]
Documentation/fast-import: put explanation of M 040000 <dataref> "" in context

Omit needless words ("Additionally ... <path> may also" is redundant).
While at it, place the explanation of this special case after the
general rules for paths to provide the reader with some context.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agosvndump.c: Fix a printf format compiler warning
Ramsay Jones [Tue, 11 Jan 2011 18:17:21 +0000 (18:17 +0000)]
svndump.c: Fix a printf format compiler warning

In particular, on systems that define uint32_t as an unsigned long,
gcc complains as follows:

        CC vcs-svn/svndump.o
    vcs-svn/svndump.c: In function `svndump_read':
    vcs-svn/svndump.c:215: warning: int format, uint32_t arg (arg 2)

In order to suppress the warning we use the C99 format specifier
macro PRIu32 from <inttypes.h>.

Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoremote-ext: do not segfault for blank lines
Jonathan Nieder [Sun, 16 Jan 2011 03:49:40 +0000 (21:49 -0600)]
remote-ext: do not segfault for blank lines

Instead of stripping space characters past the beginning of the
line and overflowing a buffer, stop at the beginning of the line
(mimicking the corresponding fix in remote-fd).

The argument to isspace does not need to be cast explicitly because
git isspace takes care of that already.

Noticed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoDocumentation/fast-import: capitalize beginning of sentence
Jonathan Nieder [Sun, 16 Jan 2011 02:16:05 +0000 (20:16 -0600)]
Documentation/fast-import: capitalize beginning of sentence

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoll-merge: simplify opts == NULL case
Jonathan Nieder [Sun, 16 Jan 2011 01:08:42 +0000 (19:08 -0600)]
ll-merge: simplify opts == NULL case

As long as sizeof(struct ll_merge_options) is small, there is not
much reason not to keep a copy of the default merge options in the BSS
section.  In return, we get clearer code and one less stack frame in
the opts == NULL case.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoGit 1.7.4-rc2 v1.7.4-rc2
Junio C Hamano [Thu, 13 Jan 2011 19:42:01 +0000 (11:42 -0800)]
Git 1.7.4-rc2

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'jn/gitweb-no-logo'
Junio C Hamano [Thu, 13 Jan 2011 19:39:18 +0000 (11:39 -0800)]
Merge branch 'jn/gitweb-no-logo'

* jn/gitweb-no-logo:
  gitweb: make logo optional

13 years agoMerge branch 'jn/perl-funcname'
Junio C Hamano [Thu, 13 Jan 2011 19:38:05 +0000 (11:38 -0800)]
Merge branch 'jn/perl-funcname'

* jn/perl-funcname:
  userdiff/perl: catch BEGIN/END/... and POD as headers
  diff: funcname and word patterns for perl

13 years agoMerge branch 'sr/gitweb-hilite-more'
Junio C Hamano [Thu, 13 Jan 2011 19:36:12 +0000 (11:36 -0800)]
Merge branch 'sr/gitweb-hilite-more'

* sr/gitweb-hilite-more:
  gitweb: remove unnecessary test when closing file descriptor
  gitweb: add extensions to highlight feature map

13 years agoMerge branch 'rj/svn-test'
Junio C Hamano [Thu, 13 Jan 2011 19:36:05 +0000 (11:36 -0800)]
Merge branch 'rj/svn-test'

* rj/svn-test:
  lib-git-svn.sh: Move web-server handling code into separate function

13 years agoMerge branch 'rj/test-fixes'
Junio C Hamano [Thu, 13 Jan 2011 19:35:28 +0000 (11:35 -0800)]
Merge branch 'rj/test-fixes'

* rj/test-fixes:
  t4135-*.sh: Skip the "backslash" tests on cygwin
  t3032-*.sh: Do not strip CR from line-endings while grepping on MinGW
  t3032-*.sh: Pass the -b (--binary) option to sed on cygwin
  t6038-*.sh: Pass the -b (--binary) option to sed on cygwin

Conflicts:
t/t3032-merge-recursive-options.sh

13 years agoMerge branch 'jk/diff-driver-binary-doc'
Junio C Hamano [Thu, 13 Jan 2011 19:34:56 +0000 (11:34 -0800)]
Merge branch 'jk/diff-driver-binary-doc'

* jk/diff-driver-binary-doc:
  docs: explain diff.*.binary option

13 years agoMerge branch 'jn/t9010-work-around-broken-svnadmin'
Junio C Hamano [Thu, 13 Jan 2011 19:34:52 +0000 (11:34 -0800)]
Merge branch 'jn/t9010-work-around-broken-svnadmin'

* jn/t9010-work-around-broken-svnadmin:
  t9010: svnadmin can fail even if available

13 years agoMerge branch 'tr/submodule-relative-scp-url'
Junio C Hamano [Thu, 13 Jan 2011 19:34:39 +0000 (11:34 -0800)]
Merge branch 'tr/submodule-relative-scp-url'

* tr/submodule-relative-scp-url:
  submodule: fix relative url parsing for scp-style origin

13 years agoRelNotes/1.7.4: minor fixes
Michael J Gruber [Thu, 13 Jan 2011 09:35:34 +0000 (10:35 +0100)]
RelNotes/1.7.4: minor fixes

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agot0000: quote TAP snippets in test code
Thomas Rast [Thu, 13 Jan 2011 11:30:23 +0000 (12:30 +0100)]
t0000: quote TAP snippets in test code

t0000 contains two snippets of actual test output.  This causes
problems when passing -v to the test[*]: the test infrastructure
echoes the tests before running them, and the TAP parser then sees
this test output and concludes that two tests failed and that the TAP
output was badly formatted.

Guard against this by quoting the output in the source.

[*] either by running 'make smoke' with GIT_TEST_OPTS=-v, or with
prove ./t0000-basic.sh :: -v

Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'maint'
Junio C Hamano [Thu, 13 Jan 2011 05:26:51 +0000 (21:26 -0800)]
Merge branch 'maint'

* maint:
  commit: suggest --amend --reset-author to fix commiter identity

13 years agocommit: suggest --amend --reset-author to fix commiter identity
Matthieu Moy [Wed, 12 Jan 2011 18:29:14 +0000 (19:29 +0100)]
commit: suggest --amend --reset-author to fix commiter identity

Since the message advises to fix the configuration first, the
advantage of using this command is that it is cut-and-paste ready,
while using --author='...' requires the user to type his name and
email again.

Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agot9157-*.sh: Make the svn version check more precise
Ramsay Jones [Mon, 10 Jan 2011 23:21:26 +0000 (23:21 +0000)]
t9157-*.sh: Make the svn version check more precise

These tests require an svn version 1.5 or newer to run correctly.
In particular, all 1.4.x versions and earlier are too old, so fix
up the case label regex to cover this range exactly.

[Fix provided by Anders Kaseorg <andersk@MIT.EDU>]

Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agouserdiff: match Pascal class methods
Alexey Shumkin [Tue, 11 Jan 2011 08:53:59 +0000 (11:53 +0300)]
userdiff: match Pascal class methods

Class declarations were already covered by the second pattern, but class
methods have the 'class' keyword in front too. Account for it.

Signed-off-by: Alexey Shumkin <zapped@mail.ru>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agot/README: hint about using $(pwd) rather than $PWD in tests
Johannes Sixt [Tue, 11 Jan 2011 07:44:30 +0000 (08:44 +0100)]
t/README: hint about using $(pwd) rather than $PWD in tests

This adds just a "do it this way" instruction without a lot of explanation,
because the details are too complex to be explained at this point.

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoFix expected values of setup tests on Windows
Johannes Sixt [Thu, 30 Dec 2010 20:51:53 +0000 (21:51 +0100)]
Fix expected values of setup tests on Windows

On Windows, bash stores absolute path names in shell variables in POSIX
format that begins with a slash, rather than in drive-letter format; such
a value is converted to the latter format when it is passed to a non-MSYS
program such as git.

When an expected test value is constructed, it must contain the value that
will be produced by git, which will be in the drive-letter format. But
TRASH_DIRECTORY is in POSIX format. Fix this by using $(pwd), which
produces drive-letter format since 4114156a (Tests on Windows: $(pwd) must
return Windows-style paths).

The change in t1510 is a straight seach-and-replace, except for the first
hunk of the diff.

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'maint'
Junio C Hamano [Mon, 10 Jan 2011 18:39:38 +0000 (10:39 -0800)]
Merge branch 'maint'

* maint:
  Documentation/githooks: post-rewrite-copy-notes never existed
  Documentation/git-archive: spell --worktree-attributes correctly

13 years agoMerge branch 'maint-1.7.2' into maint
Junio C Hamano [Mon, 10 Jan 2011 18:39:28 +0000 (10:39 -0800)]
Merge branch 'maint-1.7.2' into maint

* maint-1.7.2:
  Documentation/githooks: post-rewrite-copy-notes never existed
  Documentation/git-archive: spell --worktree-attributes correctly

13 years agoMerge branch 'maint-1.7.1' into maint-1.7.2
Junio C Hamano [Mon, 10 Jan 2011 18:39:18 +0000 (10:39 -0800)]
Merge branch 'maint-1.7.1' into maint-1.7.2

* maint-1.7.1:
  Documentation/githooks: post-rewrite-copy-notes never existed
  Documentation/git-archive: spell --worktree-attributes correctly

13 years agoMerge branch 'maint-1.7.0' into maint-1.7.1
Junio C Hamano [Mon, 10 Jan 2011 18:39:04 +0000 (10:39 -0800)]
Merge branch 'maint-1.7.0' into maint-1.7.1

* maint-1.7.0:
  Documentation/git-archive: spell --worktree-attributes correctly

13 years agodocs: explain diff.*.binary option
Jeff King [Sun, 9 Jan 2011 20:10:04 +0000 (15:10 -0500)]
docs: explain diff.*.binary option

This was added long ago as part of the userdiff refactoring
for textconv, as internally it made the code simpler and
cleaner. However, there was never a concrete use case for
actually using the config variable.

Now that Matthieu Moy has provided such a use case, it's
easy to explain it using his example.

Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agot9010: svnadmin can fail even if available
Jonathan Nieder [Thu, 6 Jan 2011 18:00:51 +0000 (12:00 -0600)]
t9010: svnadmin can fail even if available

If svn is built against one version of SQLite and run against another,
libsvn_subr needlessly errors out in operations that need to make a
commit.

That is clearly not a bug in git but let us consider the ramifications for
the test suite.  git-svn uses libsvn directly and is probably broken by
that bug; it is right for git-svn tests to fail.  The vcs-svn lib, on the
other hand, does not use libsvn and the test t9010 only uses svn to check
its work.  This points to two possible improvements:

 - do not disable most vcs-svn tests if svn is missing.
 - skip validation rather than failing it when svn fails.

Bring about both by putting the svn invocations into a single test that
builds a repo to compare the test-svn-fe result against.  The test will
always pass but only will set the new SVNREPO test prereq if svn succeeds;
and validation using that repo gets an SVNREPO prerequisite so it only
runs with working svn installations.

Works-around: http://bugs.debian.org/608925
Noticed-by: A Large Angry SCM <gitzilla@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
13 years agosubmodule: fix relative url parsing for scp-style origin
Thomas Rast [Mon, 10 Jan 2011 10:37:26 +0000 (11:37 +0100)]
submodule: fix relative url parsing for scp-style origin

The function resolve_relative_url was not prepared to deal with an
scp-style origin 'user@host:path' in the case where 'path' is only a
single component.  Fix this by extending the logic that strips one
path component from the $remoteurl.

Also add tests for both styles of URLs.

Noticed-by: Jeffrey Phillips Freeman <jeffrey.freeman@syncleus.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoDocumentation/githooks: post-rewrite-copy-notes never existed
Thomas Rast [Mon, 10 Jan 2011 12:42:23 +0000 (13:42 +0100)]
Documentation/githooks: post-rewrite-copy-notes never existed

The documentation for the post-rewrite hook contains a paragraph from
its early development, where the automatic notes copying facilities
were not part of the series and thus this had to be a hook.  Later
versions of the series implemented notes copying as a core feature.

Thus mentioning post-rewrite-copy-notes was never correct.  As the
other hooks do not have a "there is no default hook, but..." sentence
unless they ship a sample hook in either templates or contrib, we
simply remove the whole paragraph.

Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoDocumentation/git-archive: spell --worktree-attributes correctly
Thomas Rast [Mon, 10 Jan 2011 12:57:43 +0000 (13:57 +0100)]
Documentation/git-archive: spell --worktree-attributes correctly

The --worktree-attributes option was correctly documented in ba053ea
(archive: do not read .gitattributes in working directory,
2009-04-18).  However, later in 9b4c8b0 (archive documentation:
attributes are taken from the tree by default, 2010-02-10) the
misspelling "--work-tree-attributes" was used to refer to it.  Fix
this.

Noticed-by: Jeffrey Phillips Freeman <jeffrey.freeman@syncleus.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'maint'
Junio C Hamano [Sun, 9 Jan 2011 07:48:47 +0000 (23:48 -0800)]
Merge branch 'maint'

* maint:
  Mark gitk script executable

13 years agot4135-*.sh: Skip the "backslash" tests on cygwin
Ramsay Jones [Tue, 14 Dec 2010 18:37:43 +0000 (18:37 +0000)]
t4135-*.sh: Skip the "backslash" tests on cygwin

The BSLASHPSPEC tests (11-13) fail on cygwin, since you can't
create files containing an backslash character in the name.
In order to skip these tests, we simply stop (incorrectly)
asserting the BSLASHPSPEC prerequisite in test-lib.sh.

Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agot3032-*.sh: Do not strip CR from line-endings while grepping on MinGW
Ramsay Jones [Tue, 14 Dec 2010 18:35:48 +0000 (18:35 +0000)]
t3032-*.sh: Do not strip CR from line-endings while grepping on MinGW

By default grep reads in text mode and converts CRLF into LF line
endings, which causes tests 4, 6 and 8 to fail. In a similar manner
to commit a94114ad  (Do not strip CR when grepping HTTP headers,
2010-09-12), we set (and export) the GREP_OPTIONS variable to -U so
that grep will use binary mode.

Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agot3032-*.sh: Pass the -b (--binary) option to sed on cygwin
Ramsay Jones [Tue, 14 Dec 2010 18:34:29 +0000 (18:34 +0000)]
t3032-*.sh: Pass the -b (--binary) option to sed on cygwin

The test using the conflict_hunks helper function (test 9) fails
on cygwin, since sed (by default) throws away the CR from CRLF
line endings. This behaviour is undesirable, since the validation
code expects the CRLF line-ending to be present. In order to fix
the problem we pass the -b (--binary) option to sed, using the
SED_OPTIONS variable. We use the SED_STRIPS_CR prerequisite in the
conditional initialisation of SED_OPTIONS.

Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agot6038-*.sh: Pass the -b (--binary) option to sed on cygwin
Ramsay Jones [Tue, 14 Dec 2010 18:32:12 +0000 (18:32 +0000)]
t6038-*.sh: Pass the -b (--binary) option to sed on cygwin

The tests using the fuzz_conflict helper function (tests 5-6)
fail on cygwin in the same way they used to on MinGW, prior
to commit ca02ad3. The solution is also the same; passing the
-b (--binary) option to sed, using the SED_OPTIONS variable.
We introduce a new prerequisite SED_STRIPS_CR to use in the
conditional initialisation of SED_OPTIONS, rather than MINGW.
The new prerequisite is set in test-lib.sh for both MinGW and
Cygwin.

Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMark gitk script executable
Anders Kaseorg [Fri, 7 Jan 2011 01:14:41 +0000 (20:14 -0500)]
Mark gitk script executable

The executable bit on gitk-git/gitk was lost (accidentally it seems) by
commit 62ba5143ec2ab9d4083669b1b1679355e7639cd5.  Put it back, so that
gitk can be run directly from a git.git checkout.

Note that the script is already executable in gitk.git, just not in
git.git.

Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agot9157-*.sh: Add an svn version check
Ramsay Jones [Thu, 6 Jan 2011 18:29:23 +0000 (18:29 +0000)]
t9157-*.sh: Add an svn version check

Acked-by: Eric Wong <normalperson@yhbt.net>
Acked-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
13 years agogit svn: fix the final example in man page
StephenB [Thu, 6 Jan 2011 19:06:51 +0000 (19:06 +0000)]
git svn: fix the final example in man page

'git-remote add' creates a remote.origin.fetch entry in the config, we
want to replace this entry rather than add another one (which will
cause 'git fetch' to error).

This adds 'git config --remove-section remote.origin' after the fetch
for encouraging users to only use "git svn" for future updates.

[ew: rewording of commit message for present tense]

Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: StephenB <mail4stb@gmail.com>
13 years agot3032: limit sed branch labels to 8 characters
Brandon Casey [Thu, 6 Jan 2011 00:30:03 +0000 (18:30 -0600)]
t3032: limit sed branch labels to 8 characters

POSIX leaves as unspecified the handling of labels greater than 8
characters.  Apparently, Sun decided to treat them as errors.  Make sed on
Solaris happy by trimming the length of labels to 8 characters.

Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agot0001,t1510,t3301: use sane_unset which always returns with status 0
Brandon Casey [Thu, 6 Jan 2011 00:30:02 +0000 (18:30 -0600)]
t0001,t1510,t3301: use sane_unset which always returns with status 0

On some shells (like /usr/xpg4/bin/sh on Solaris), unset will exit
non-zero when passed the name of a variable that has not been set.  Use
sane_unset instead so that the return value of unset can be ignored while
the && linkage of the test script can be preserved.

Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agotrace.c: ensure NULL is not passed to printf
Brandon Casey [Thu, 6 Jan 2011 00:30:01 +0000 (18:30 -0600)]
trace.c: ensure NULL is not passed to printf

GNU printf, and many others, will print the string "(null)" if a NULL
pointer is passed as the argument to a "%s" format specifier.  Some
implementations (like on Solaris) do not detect a NULL pointer and will
produce a segfault in this case.

So, fix this by ensuring that pointer variables do not contain the value
NULL.  Assign the string "(null)" to the variables are NULL.

Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoGit 1.7.4-rc1 v1.7.4-rc1
Junio C Hamano [Wed, 5 Jan 2011 22:46:07 +0000 (14:46 -0800)]
Git 1.7.4-rc1

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'maint' to sync with 1.7.3.5
Junio C Hamano [Wed, 5 Jan 2011 22:50:33 +0000 (14:50 -0800)]
Merge branch 'maint' to sync with 1.7.3.5

13 years agoGit 1.7.3.5 v1.7.3.5
Junio C Hamano [Wed, 5 Jan 2011 22:49:19 +0000 (14:49 -0800)]
Git 1.7.3.5

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'jn/svn-fe' (early part)
Junio C Hamano [Wed, 5 Jan 2011 21:34:43 +0000 (13:34 -0800)]
Merge branch 'jn/svn-fe' (early part)

* 'jn/svn-fe' (early part):
  vcs-svn: Error out for v3 dumps

Conflicts:
t/t9010-svn-fe.sh

13 years agoMerge branch 'ao/t9001-fix'
Junio C Hamano [Wed, 5 Jan 2011 21:31:25 +0000 (13:31 -0800)]
Merge branch 'ao/t9001-fix'

* ao/t9001-fix:
  t/t9001-send-email.sh: fix '&&' chain in some tests

13 years agoMerge branch 'pw/convert-pathname-substitution'
Junio C Hamano [Wed, 5 Jan 2011 21:31:01 +0000 (13:31 -0800)]
Merge branch 'pw/convert-pathname-substitution'

* pw/convert-pathname-substitution:
  t0021: avoid getting filter killed with SIGPIPE
  convert filter: supply path to external driver

13 years agoMerge branch 'mg/cvsimport'
Junio C Hamano [Wed, 5 Jan 2011 21:30:29 +0000 (13:30 -0800)]
Merge branch 'mg/cvsimport'

* mg/cvsimport:
  cvsimport: handle the parsing of uppercase config options
  cvsimport: partial whitespace cleanup

13 years agogitweb: remove unnecessary test when closing file descriptor
Sylvain Rabot [Thu, 30 Dec 2010 21:20:29 +0000 (22:20 +0100)]
gitweb: remove unnecessary test when closing file descriptor

It happens that closing file descriptor fails whereas the blob is
perfectly readable.  According to perlman the reasons could be:

   If the file handle came from a piped open, "close" will additionally
   return false if one of the other system calls involved fails, or if the
   program exits with non-zero status.  (If the only problem was that the
   program exited non-zero, $! will be set to 0.)  Closing a pipe also waits
   for the process executing on the pipe to complete, in case you want to
   look at the output of the pipe afterwards, and implicitly puts the exit
   status value of that command into $?.

   Prematurely closing the read end of a pipe (i.e. before the process writ-
   ing to it at the other end has closed it) will result in a SIGPIPE being
   delivered to the writer.  If the other end can't handle that, be sure to
   read all the data before closing the pipe.

In this case we don't mind that close fails.

Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agogitweb: add extensions to highlight feature map
Sylvain Rabot [Thu, 30 Dec 2010 21:20:28 +0000 (22:20 +0100)]
gitweb: add extensions to highlight feature map

added: sql, php5, phps, bash, zsh, ksh, mk, make

Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agot/t9001-send-email.sh: fix '&&' chain in some tests
Antonio Ospite [Tue, 4 Jan 2011 20:56:58 +0000 (21:56 +0100)]
t/t9001-send-email.sh: fix '&&' chain in some tests

t/README recommends chaining test assertions.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>