git-svn: don't check for migrations/upgrades on commit-diff
Unlike other git-svn commands, commit-diff is intended to
operate without needing any additional metadata inside .git
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Unlike other git-svn commands, commit-diff is intended to
operate without needing any additional metadata inside .git
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
show-branch: fix performance problem.
The core function used in show-branch, join_revs(), was supposed
to be exactly the same algorithm as merge_bases(), except that
it was a version enhanced for use with more than two heads.
However, it needed to mark and keep a list of all the commits it
has seen, because it needed them for its semi-graphical output.
The function to implement this list, mark_seen(), stupidly used
insert_by_date(), when it did not need to keep the list sorted
during its processing. This made "show-branch --merge-base"
more than 20x slower compared to "merge-base --all" in some
cases (e.g. between b5032a5 and 48ce8b0 in the Linux 2.6 kernel
archive). The performance of "show-branch --independent"
suffered from the same reason.
This patch sorts the resulting list after the list traversal
just once to fix these problems.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The core function used in show-branch, join_revs(), was supposed
to be exactly the same algorithm as merge_bases(), except that
it was a version enhanced for use with more than two heads.
However, it needed to mark and keep a list of all the commits it
has seen, because it needed them for its semi-graphical output.
The function to implement this list, mark_seen(), stupidly used
insert_by_date(), when it did not need to keep the list sorted
during its processing. This made "show-branch --merge-base"
more than 20x slower compared to "merge-base --all" in some
cases (e.g. between b5032a5 and 48ce8b0 in the Linux 2.6 kernel
archive). The performance of "show-branch --independent"
suffered from the same reason.
This patch sorts the resulting list after the list traversal
just once to fix these problems.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/urls.txt: Use substitution to escape square brackets
This changes "[user@]" to use {startsb} and {endsb} to insert [ and ],
similar to how {caret} is used in git-rev-parse.txt.
[jc: Removed a well-intentioned comment that broke the final
formatting from the original patch. While we are at it,
updated the paragraph that claims to be equivalent to the
section that was updated earlier without making matching
changes.]
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes "[user@]" to use {startsb} and {endsb} to insert [ and ],
similar to how {caret} is used in git-rev-parse.txt.
[jc: Removed a well-intentioned comment that broke the final
formatting from the original patch. While we are at it,
updated the paragraph that claims to be equivalent to the
section that was updated earlier without making matching
changes.]
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/Makefile: product depends on asciidoc.conf
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'lt/unitype'
* lt/unitype:
builtin-prune.c: forgot TYPE => OBJ changes.
Remove TYPE_* constant macros and use object_type enums consistently.
* lt/unitype:
builtin-prune.c: forgot TYPE => OBJ changes.
Remove TYPE_* constant macros and use object_type enums consistently.
Merge branch 'sp/lazy-mkdir'
* sp/lazy-mkdir:
Make lazy mkdir more robust.
* sp/lazy-mkdir:
Make lazy mkdir more robust.
Fix "git-fetch --tags" exit status when nothing has been changed
After commit 55b7835e1b81a6debc7648149d2b8a4c5c64ddba git-fetch --tags
exits with status 1 when no tags have been changed, which breaks calling
git-fetch from scripts.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After commit 55b7835e1b81a6debc7648149d2b8a4c5c64ddba git-fetch --tags
exits with status 1 when no tags have been changed, which breaks calling
git-fetch from scripts.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
argv created by handle_alias should be NULL terminated
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
documentation (urls.txt) typofix
builtin-prune.c: forgot TYPE => OBJ changes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb.css: Use monospace fonts for commits and tree-diff.
Use monospace fonts for the commit header, commit message,
and tree-diff. This helps viewing commit logs with ASCII art.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use monospace fonts for the commit header, commit message,
and tree-diff. This helps viewing commit logs with ASCII art.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Do not use perl in git-commit.sh
git-commit.sh has the only one place where perl is used
and there it can quite trivially be done in sh.
git-ls-files without "-z" produces quoted output, even if
is different from that produced by perl code it is good
enough.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-commit.sh has the only one place where perl is used
and there it can quite trivially be done in sh.
git-ls-files without "-z" produces quoted output, even if
is different from that produced by perl code it is good
enough.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff: Support 256 colors
Add support for more than 8 colors. Colors can be specified as numbers
-1..255. -1 is same as "normal".
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add support for more than 8 colors. Colors can be specified as numbers
-1..255. -1 is same as "normal".
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff: Support both attributes and colors
Make it possible to set both colors and a attribute for diff colors.
Background colors are supported too.
Syntax is now:
[attr] [fg [bg]]
[fg [bg]] [attr]
Empty value is same as "normal normal", ie use default colors. The new
syntax is backwards compatible.
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make it possible to set both colors and a attribute for diff colors.
Background colors are supported too.
Syntax is now:
[attr] [fg [bg]]
[fg [bg]] [attr]
Empty value is same as "normal normal", ie use default colors. The new
syntax is backwards compatible.
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation about exclude/ignore files
Use .git/info/exclude in the example in git-ls-files.txt,
instead of .git/ignore, and update the list of commands looking
at .git/info/exclude in repository-layout.txt.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use .git/info/exclude in the example in git-ls-files.txt,
instead of .git/ignore, and update the list of commands looking
at .git/info/exclude in repository-layout.txt.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
daemon: new option --detach to run git-daemon in background
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
daemon: new option --pid-file=<path> to store the pid
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
upload-pack: ignore write errors to stderr
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
daemon: if one of the standard fds is missing open it to /dev/null
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
daemon: use a custom die routine with syslog
Removed the git-daemon prefix from die() because no other call to die
does this.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Removed the git-daemon prefix from die() because no other call to die
does this.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation: Fix ssh://[user@]host.xz URL
Earlier commit c3f17061 broke asciidoc markup.
Noticed by Alp Toker with a fix, but fixed up in a way with smaller
formatting impact.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier commit c3f17061 broke asciidoc markup.
Noticed by Alp Toker with a fix, but fixed up in a way with smaller
formatting impact.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Adjust t4013 tests to corrected format-patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
format-patch: Generate a newline between the subject header and the message body
format-patch previously didn't generate a newline after a subject. This
caused the diffstat to not be displayed in messages with only one line
for the commit message.
This patch fixes this by adding a newline after the headers if a body
hasn't been added.
Signed-off-by: Robert Shearman <rob@codeweavers.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
format-patch previously didn't generate a newline after a subject. This
caused the diffstat to not be displayed in messages with only one line
for the commit message.
This patch fixes this by adding a newline after the headers if a body
hasn't been added.
Signed-off-by: Robert Shearman <rob@codeweavers.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
t4013 diff format tests update
This changes one test commit in the sequence to have more than
one lines of commit log. A few output formats (--pretty=email
aka format-patch and --pretty=oneline) need to behave
differently on single and multi-line log, and this change will
help catching breakages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes one test commit in the sequence to have more than
one lines of commit log. A few output formats (--pretty=email
aka format-patch and --pretty=oneline) need to behave
differently on single and multi-line log, and this change will
help catching breakages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Display help for Git mode after pressing `h' or `?' in *git-status*
Add bindings for "h" and "?" in git-status-mode to display help about the mode,
including keymap via (describe-function 'git-status-mode), like in PCL-CVS.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add bindings for "h" and "?" in git-status-mode to display help about the mode,
including keymap via (describe-function 'git-status-mode), like in PCL-CVS.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Wrap long lines in docstrings in contrib/emacs/git.el
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove TYPE_* constant macros and use object_type enums consistently.
This updates the type-enumeration constants introduced to reduce
the memory footprint of "struct object" to match the type bits
already used in the packfile format, by removing the former
(i.e. TYPE_* constant macros) and using the latter (i.e. enum
object_type) throughout the code for consistency.
Eventually we can stop passing around the "type strings"
entirely, and this will help - no confusion about two different
integer enumeration.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates the type-enumeration constants introduced to reduce
the memory footprint of "struct object" to match the type bits
already used in the packfile format, by removing the former
(i.e. TYPE_* constant macros) and using the latter (i.e. enum
object_type) throughout the code for consistency.
Eventually we can stop passing around the "type strings"
entirely, and this will help - no confusion about two different
integer enumeration.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make lazy mkdir more robust.
Linus Torvalds <torvalds@osdl.org> wrote:
It's entirely possible that we should just make that whole
if (ret == ENOENT)
go away. Yes, it's the right error code if a subdirectory is missing, and
yes, POSIX requires it, and yes, WXP is probably just a horrible piece of
sh*t, but on the other hand, I don't think git really has any serious
reason to even care.
Linus Torvalds <torvalds@osdl.org> wrote:
It's entirely possible that we should just make that whole
if (ret == ENOENT)
go away. Yes, it's the right error code if a subdirectory is missing, and
yes, POSIX requires it, and yes, WXP is probably just a horrible piece of
sh*t, but on the other hand, I don't think git really has any serious
reason to even care.
Merge branch 'ml/trace'
* ml/trace:
test-lib: unset GIT_TRACE
GIT_TRACE: fix a mixed declarations and code warning
GIT_TRACE: show which built-in/external commands are executed
* ml/trace:
test-lib: unset GIT_TRACE
GIT_TRACE: fix a mixed declarations and code warning
GIT_TRACE: show which built-in/external commands are executed
test-lib: unset GIT_TRACE
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-repack: avoid redirecting stderr into git-pack-objects
We are trying to catch error condition of git-rev-list and cause
the downstream pack-objects to barf, but if you run rev-list
with anything that mucks with its stderr (such as GIT_TRACE),
any stderr output would cause the pipeline to fail.
[jc: originally from Matthias Lederhofer, with a reworded error message.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
We are trying to catch error condition of git-rev-list and cause
the downstream pack-objects to barf, but if you run rev-list
with anything that mucks with its stderr (such as GIT_TRACE),
any stderr output would cause the pipeline to fail.
[jc: originally from Matthias Lederhofer, with a reworded error message.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix grammatical error in git-revert
We always talk about "commit xyz".
We never talk about "xyz commit", except when we end up talking
about a commit as a branch head (notably, I would say "the HEAD
commit", or possibly "the top-of-master commit", but here
$commit is a SHA1 name, not anything else).
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We always talk about "commit xyz".
We never talk about "xyz commit", except when we end up talking
about a commit as a branch head (notably, I would say "the HEAD
commit", or possibly "the top-of-master commit", but here
$commit is a SHA1 name, not anything else).
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'js/merge-base'
* js/merge-base:
Additional merge-base tests (revised)
merge-base: update the clean-up postprocessing
* js/merge-base:
Additional merge-base tests (revised)
merge-base: update the clean-up postprocessing
Merge branch 'lt/prune'
* lt/prune:
builtin "git prune"
* lt/prune:
builtin "git prune"
Merge branch 'lt/merge-tree'
* lt/merge-tree:
Improved three-way blob merging code
Prepare "git-merge-tree" for future work
xdiff: generate "anti-diffs" aka what is common to two files
* lt/merge-tree:
Improved three-way blob merging code
Prepare "git-merge-tree" for future work
xdiff: generate "anti-diffs" aka what is common to two files
fmt-merge-msg fix
The new C version mistranslated the original Perl version in the
case to pull from the HEAD. This made it to say nonsense like
this:
Merge commit ...url... of HEAD
* HEAD:
...
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new C version mistranslated the original Perl version in the
case to pull from the HEAD. This made it to say nonsense like
this:
Merge commit ...url... of HEAD
* HEAD:
...
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Make command invocations go through the git wrapper
This patch makes invocations of core git commands go through the 'git'
binary itself, which improves readability and might help system
administrators lock down their CGI environment for security.
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch makes invocations of core git commands go through the 'git'
binary itself, which improves readability and might help system
administrators lock down their CGI environment for security.
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Include a site name in page titles
This helps users tell one 'git' bookmark apart from the other in their
browser and improves the indexing of gitweb sites in Web search engines.
The title defaults to the SERVER_NAME environment variable, often given
by the webserver.
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This helps users tell one 'git' bookmark apart from the other in their
browser and improves the indexing of gitweb sites in Web search engines.
The title defaults to the SERVER_NAME environment variable, often given
by the webserver.
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Send XHTML as 'application/xhtml+xml' where possible
"The 'text/html' media type [RFC2854] is primarily for HTML, not for
XHTML. In general, this media type is NOT suitable for XHTML."
This patch makes gitweb use content negotiation to conservatively send
pages as Content-Type 'application/xhtml+xml' when the user agent
explicitly claims to support it.
It falls back to 'text/html' even if the user agent appears to
implicitly support 'application/xhtml+xml' due to a '*/*' glob, working
around an insidious bug in Internet Explorer where sending the correct
media type prevents the page from being displayed.
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"The 'text/html' media type [RFC2854] is primarily for HTML, not for
XHTML. In general, this media type is NOT suitable for XHTML."
This patch makes gitweb use content negotiation to conservatively send
pages as Content-Type 'application/xhtml+xml' when the user agent
explicitly claims to support it.
It falls back to 'text/html' even if the user agent appears to
implicitly support 'application/xhtml+xml' due to a '*/*' glob, working
around an insidious bug in Internet Explorer where sending the correct
media type prevents the page from being displayed.
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-fetch: fix a bashism (==)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make the unpacked object header functions static to sha1_file.c
Nobody else uses them, and I'm going to start changing them.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Nobody else uses them, and I'm going to start changing them.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-send-email: Remove redundant Reply-To header
There is no sense in duplicating the sender address in Reply-To as it's
already provided in the From header.
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There is no sense in duplicating the sender address in Reply-To as it's
already provided in the From header.
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
typofix (git-name-rev documentation)
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mention the [user@] part in documentation of ssh:// urls.
Signed-off-by: Yakov Lerner <iler.ml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Yakov Lerner <iler.ml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
tests: Set EDITOR=: and VISUAL=: globally
This way we don't have to remember to set it for each test; and
if we forget, we won't cause interactive editors to be spawned
for non-interactive tests.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This way we don't have to remember to set it for each test; and
if we forget, we won't cause interactive editors to be spawned
for non-interactive tests.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Log ref changes made by git-fetch and git-pull.
When git-fetch updates a reference record in the associated reflog
what type of update took place and who caused it (git-fetch or
git-pull, by invoking git-fetch).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When git-fetch updates a reference record in the associated reflog
what type of update took place and who caused it (git-fetch or
git-pull, by invoking git-fetch).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Record the type of commit operation in the reflog.
If committing a merge (.git/MERGE_HEAD exists), an initial tree
(no HEAD) or using --amend to amend the prior commit then denote
the subtype of commit in the reflog. This helps to distinguish
amended or merge commits from normal commits.
In the case of --amend the prior sha1 is probably the commit which
is being thrown away in favor of the new commit. Since it is likely
that the old commit doesn't have any ref pointing to it anymore
it can be interesting to know why that the commit was replaced
and orphaned.
In the case of a merge the prior sha1 is probably the first parent
of the new merge commit. Consequently having its prior sha1 in the
reflog is slightly less interesting but its still informative to
know the commit was the result of a merge which had to be completed
by hand.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If committing a merge (.git/MERGE_HEAD exists), an initial tree
(no HEAD) or using --amend to amend the prior commit then denote
the subtype of commit in the reflog. This helps to distinguish
amended or merge commits from normal commits.
In the case of --amend the prior sha1 is probably the commit which
is being thrown away in favor of the new commit. Since it is likely
that the old commit doesn't have any ref pointing to it anymore
it can be interesting to know why that the commit was replaced
and orphaned.
In the case of a merge the prior sha1 is probably the first parent
of the new merge commit. Consequently having its prior sha1 in the
reflog is slightly less interesting but its still informative to
know the commit was the result of a merge which had to be completed
by hand.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow user.name and user.email to drive reflog entry.
Apparently calling setup_ident() after git_config causes the
user.name and user.email values read from the config file to be
replaced with the data obtained from the host. This means that
users who have setup their email address in user.email will instead
be writing reflog entries with their hostname.
Moving setup_ident() to before git_config in update-ref resolves
this ordering problem.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Apparently calling setup_ident() after git_config causes the
user.name and user.email values read from the config file to be
replaced with the data obtained from the host. This means that
users who have setup their email address in user.email will instead
be writing reflog entries with their hostname.
Moving setup_ident() to before git_config in update-ref resolves
this ordering problem.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix linking for not-so-clever linkers.
On one of my systems, the linker is not intelligent enough to link with
pager.o (in libgit.a) when only the variable pager_in_use is needed. The
consequence is that the linker complains about an undefined variable. So,
put the variable into environment.o, where it is linked always.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On one of my systems, the linker is not intelligent enough to link with
pager.o (in libgit.a) when only the variable pager_in_use is needed. The
consequence is that the linker complains about an undefined variable. So,
put the variable into environment.o, where it is linked always.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-rev-list: add documentation for --parents, --no-merges
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'jc/show-merge'
* jc/show-merge:
git log -p --merge [[--] paths...]
* jc/show-merge:
git log -p --merge [[--] paths...]
Avoid C99 comments, use old-style C comments instead.
This doesn't make the code uglier or harder to read, yet it makes the
code more portable. This also simplifies checking for other potential
incompatibilities. "gcc -std=c89 -pedantic" can flag many incompatible
constructs as warnings, but C99 comments will cause it to emit an error.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This doesn't make the code uglier or harder to read, yet it makes the
code more portable. This also simplifies checking for other potential
incompatibilities. "gcc -std=c89 -pedantic" can flag many incompatible
constructs as warnings, but C99 comments will cause it to emit an error.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix more typos, primarily in the code
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb.cgi: Teach "a=blob" action to know the blob/file mime type
Now action "blob" knows the file type: if the file type is
not "text/*" then action "blob" defaults to "blob_plain",
i.e. the file is downloaded raw for the browser to interpret.
If the file type is "text/*", then "blob" defaults to the
current "cat -n"-like output, from which you can click
"plain", to get the "blob_plain" output.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now action "blob" knows the file type: if the file type is
not "text/*" then action "blob" defaults to "blob_plain",
i.e. the file is downloaded raw for the browser to interpret.
If the file type is "text/*", then "blob" defaults to the
current "cat -n"-like output, from which you can click
"plain", to get the "blob_plain" output.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb.cgi: Create $git_temp if it doesn't exist
Unless we'd done diffs, $git_temp doesn't exist and then
mime lookups fail. Explicitly create it, if it doesn't
exist already.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Unless we'd done diffs, $git_temp doesn't exist and then
mime lookups fail. Explicitly create it, if it doesn't
exist already.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'lt/gitweb'
* lt/gitweb:
Add "raw" output option to blobs in "tree" view format
* lt/gitweb:
Add "raw" output option to blobs in "tree" view format
git-svn: fix --file/-F option in commit-diff
Also, allow messages from tags to be used as
commit messages.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also, allow messages from tags to be used as
commit messages.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Avoid C99 initializers
In a handful places, we use C99 structure and array
initializers, which some compilers do not support.
This can be handy when you are trying to compile GIT on a
Solaris system that has an older C compiler, for example.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In a handful places, we use C99 structure and array
initializers, which some compilers do not support.
This can be handy when you are trying to compile GIT on a
Solaris system that has an older C compiler, for example.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'jc/rename'
* jc/rename:
diffcore-rename: try matching up renames without populating filespec first.
* jc/rename:
diffcore-rename: try matching up renames without populating filespec first.
Merge branch 'jc/grep'
* jc/grep:
git-grep: boolean expression on pattern matching.
* jc/grep:
git-grep: boolean expression on pattern matching.
Merge branch 'jc/mailinfo'
* jc/mailinfo:
mailinfo: assume input is latin-1 on the header as we do for the body
* jc/mailinfo:
mailinfo: assume input is latin-1 on the header as we do for the body
Merge branch 'ew/diff'
* ew/diff:
templates/hooks--update: replace diffstat calls with git diff --stat
diff: do not use configuration magic at the core-level
Update diff-options and config documentation.
diff.c: --no-color to defeat diff.color configuration.
diff.c: respect diff.renames config option
* ew/diff:
templates/hooks--update: replace diffstat calls with git diff --stat
diff: do not use configuration magic at the core-level
Update diff-options and config documentation.
diff.c: --no-color to defeat diff.color configuration.
diff.c: respect diff.renames config option
Merge branch 'ew/svn'
* ew/svn:
Fix some doubled word typos
Typofix in Makefile comment.
Makefile: export NO_SVN_TESTS
git-svn: migrate out of contrib (follow-up)
git-svn: migrate out of contrib
* ew/svn:
Fix some doubled word typos
Typofix in Makefile comment.
Makefile: export NO_SVN_TESTS
git-svn: migrate out of contrib (follow-up)
git-svn: migrate out of contrib
Additional merge-base tests (revised)
Signed-off-by: A Large Angry SCM <gitzilla@gmail.com>
Signed-off-by: A Large Angry SCM <gitzilla@gmail.com>
merge-base: update the clean-up postprocessing
This removes the "contaminate the well even more" approach
taken in the current merge-base postprosessing code. Instead,
when there are more than one merge-base results, we compute the
merge-base between them and see if one is a fast-forward of the
other, in which case the ancestor is removed from the result.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This removes the "contaminate the well even more" approach
taken in the current merge-base postprosessing code. Instead,
when there are more than one merge-base results, we compute the
merge-base between them and see if one is a fast-forward of the
other, in which case the ancestor is removed from the result.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix typos involving the word 'commit'
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix some doubled word typos
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix some doubled word typos
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git -p cmd" to page anywhere
This allows you to say:
git -p diff v2.6.16-rc5..
and the command pipes the output of any git command to your pager.
[jc: this resurrects a month old RFC patch with improvement
suggested by Linus to call it --paginate instead of --less.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows you to say:
git -p diff v2.6.16-rc5..
and the command pipes the output of any git command to your pager.
[jc: this resurrects a month old RFC patch with improvement
suggested by Linus to call it --paginate instead of --less.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
change ent to tree in git-diff documentation
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Typofix in Makefile comment.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Assorted typo fixes
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
GIT_TRACE: fix a mixed declarations and code warning
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
GIT_TRACE: show which built-in/external commands are executed
With the environment variable GIT_TRACE set git will show
- alias expansion
- built-in command execution
- external command execution
on stderr.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the environment variable GIT_TRACE set git will show
- alias expansion
- built-in command execution
- external command execution
on stderr.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
builtin "git prune"
This actually removes the objects to be pruned, unless you specify "-n"
(at which point it will just tell you which files it would prune).
This doesn't do the pack-file pruning that the shell-script used to do,
but if somebody really wants to, they could add it easily enough. I wonder
how useful it is, though, considering that "git repack -a -d" is just a
lot more efficient and generates a better end result.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This actually removes the objects to be pruned, unless you specify "-n"
(at which point it will just tell you which files it would prune).
This doesn't do the pack-file pruning that the shell-script used to do,
but if somebody really wants to, they could add it easily enough. I wonder
how useful it is, though, considering that "git repack -a -d" is just a
lot more efficient and generates a better end result.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add "raw" output option to blobs in "tree" view format
Add a "raw" output option to blobs in "tree" view format, so that the
user doesn't have to click on "blob", wait for the (binary) file to be
uploaded and shown in "blob" mode, and then click on "plain" to
download the (binary) file.
This is useful when the file is clearly binary and we don't want the
browser to upload and display it in "blob" mode, but we just want to
download it. Case in point: pdf files, wlg.
Note: the "raw" format is equivalent to the blob->plain view, not
blob->head view. I.e. the view has the hash of the file as listed
by git-ls-tree, not just "HEAD".
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a "raw" output option to blobs in "tree" view format, so that the
user doesn't have to click on "blob", wait for the (binary) file to be
uploaded and shown in "blob" mode, and then click on "plain" to
download the (binary) file.
This is useful when the file is clearly binary and we don't want the
browser to upload and display it in "blob" mode, but we just want to
download it. Case in point: pdf files, wlg.
Note: the "raw" format is equivalent to the blob->plain view, not
blob->head view. I.e. the view has the hash of the file as listed
by git-ls-tree, not just "HEAD".
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'sf/diff'
Disable color detection during format-patch
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-cvsexportcommit can't handle merge commits correctly
git-cvsexportcommit should check if the parent (supplied on the cmdline) to use
for a merge commit is one of the real parents of the merge.
But it errors out if the _first_ parent doesn't match and never checks
the other parents.
Signed-off-by: Peter Baumann <siprbaum@stud.informatik.uni-erlangen.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-cvsexportcommit should check if the parent (supplied on the cmdline) to use
for a merge commit is one of the real parents of the merge.
But it errors out if the _first_ parent doesn't match and never checks
the other parents.
Signed-off-by: Peter Baumann <siprbaum@stud.informatik.uni-erlangen.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Using 'perl' in *.sh
Some GIT's shell script are using bare 'perl' for perl invocation.
Use @@PERL@@ symbol and replace it with PERL_PATH_SQ everywhere.
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some GIT's shell script are using bare 'perl' for perl invocation.
Use @@PERL@@ symbol and replace it with PERL_PATH_SQ everywhere.
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
sed -e '/RE/r rfile/' needs space in 'r rfile'
Some implementations of sed (like HP-UX one) mandate a space between 'r'
and 'rfile'.
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some implementations of sed (like HP-UX one) mandate a space between 'r'
and 'rfile'.
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Close the index file between writing and committing
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
templates/hooks--update: replace diffstat calls with git diff --stat
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff: do not use configuration magic at the core-level
The Porcelainish has become so much usable as the UI that there
is not much reason people should be using the core programs by
hand anymore. At this point we are better off making the
behaviour of the core programs predictable by keeping them
unaffected by the configuration variables. Otherwise they will
become very hard to use as reliable building blocks.
For example, "git-commit -a" internally uses git-diff-files to
figure out the set of paths that need to be updated in the
index, and we should never allow diff.renames that happens to be
in the configuration to interfere (or slow down the process).
The UI level configuration such as showing renamed diff and
coloring are still honored by the Porcelainish ("git log" family
and "git diff"), but not by the core anymore.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The Porcelainish has become so much usable as the UI that there
is not much reason people should be using the core programs by
hand anymore. At this point we are better off making the
behaviour of the core programs predictable by keeping them
unaffected by the configuration variables. Otherwise they will
become very hard to use as reliable building blocks.
For example, "git-commit -a" internally uses git-diff-files to
figure out the set of paths that need to be updated in the
index, and we should never allow diff.renames that happens to be
in the configuration to interfere (or slow down the process).
The UI level configuration such as showing renamed diff and
coloring are still honored by the Porcelainish ("git log" family
and "git diff"), but not by the core anymore.
Signed-off-by: Junio C Hamano <junkio@cox.net>
colored diff: diff.color = auto fix
Even if the standard output is connected to a tty, do not
colorize the diff if we are talking to a dumb terminal when
diff.color configuration variable is set to "auto".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Even if the standard output is connected to a tty, do not
colorize the diff if we are talking to a dumb terminal when
diff.color configuration variable is set to "auto".
Signed-off-by: Junio C Hamano <junkio@cox.net>
git log -p --merge [[--] paths...]
This adds Linus's wish, "--merge" flag, which makes the above
expand to a rough equivalent to:
git log -p HEAD MERGE_HEAD ^$(git-merge-base HEAD MERGE_HEAD) \
-- $(git-ls-files -u [paths...] | cut -f2 | uniq)
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds Linus's wish, "--merge" flag, which makes the above
expand to a rough equivalent to:
git log -p HEAD MERGE_HEAD ^$(git-merge-base HEAD MERGE_HEAD) \
-- $(git-ls-files -u [paths...] | cut -f2 | uniq)
Signed-off-by: Junio C Hamano <junkio@cox.net>
Makefile: export NO_SVN_TESTS
Without this patch, it really is not sufficient to define NO_SVN_TESTS
in config.mak or the Makefile.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without this patch, it really is not sufficient to define NO_SVN_TESTS
in config.mak or the Makefile.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update diff-options and config documentation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff.c: --no-color to defeat diff.color configuration.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff.c: respect diff.renames config option
diff.renames is mentioned several times in the documentation,
but to my surprise it didn't do anything before this patch.
Also add the --no-renames option to override this from the
command-line.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff.renames is mentioned several times in the documentation,
but to my surprise it didn't do anything before this patch.
Also add the --no-renames option to override this from the
command-line.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff-options: Explain --text and -a
Signed-off-by: Stephan Feder <sf@b-i-t.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Stephan Feder <sf@b-i-t.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add -a and --text to common diff options help
Signed-off-by: Stephan Feder <sf@b-i-t.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Stephan Feder <sf@b-i-t.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Teach diff -a as shorthand for --text
Signed-off-by: Stephan Feder <sf@b-i-t.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Stephan Feder <sf@b-i-t.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Teach --text option to diff
Add new item text to struct diff_options.
If set then do not try to detect binary files.
Signed-off-by: Stephan Feder <sf@b-i-t.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add new item text to struct diff_options.
If set then do not try to detect binary files.
Signed-off-by: Stephan Feder <sf@b-i-t.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
send-email: format 2822 datestring ourselves.
It is not worth trying to force C locale (and failing) just to
format the 2822 datestring.
This code was borrowed from /usr/bin/822-date (Ian Jackson and
Klee Dienes, both in public domain), per suggestion by Eric Wong.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Acked-by: Jakub Narebski <jnareb@gmail.com>
It is not worth trying to force C locale (and failing) just to
format the 2822 datestring.
This code was borrowed from /usr/bin/822-date (Ian Jackson and
Klee Dienes, both in public domain), per suggestion by Eric Wong.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Do not drop data from '\0' until eol in patch output
The binary file detection is just a heuristic which can well fail.
Do not produce garbage patches in these cases.
Signed-off-by: Stephan Feder <sf@b-i-t.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The binary file detection is just a heuristic which can well fail.
Do not produce garbage patches in these cases.
Signed-off-by: Stephan Feder <sf@b-i-t.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
builtin-log: respect diff configuration options
The log commands are all capable of generating diffs, so we
should respect those configuration options for diffs here.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The log commands are all capable of generating diffs, so we
should respect those configuration options for diffs here.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: migrate out of contrib (follow-up)
Check for SVN::Core so test 910[45] don't fail if the user
doesn't have those installed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Check for SVN::Core so test 910[45] don't fail if the user
doesn't have those installed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
rev-parse documentation: talk about range notation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
show-branch: match documentation and usage
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>