convert-objects: set _XOPEN_SOURCE to 600
Otherwise OpenBSD header files drop S_ISLNK() definition which is used in
an inline defined in cache.h
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise OpenBSD header files drop S_ISLNK() definition which is used in
an inline defined in cache.h
Signed-off-by: Junio C Hamano <junkio@cox.net>
Run "git repack -a -d" once more at end, if there's 1MB or more of not-packed data.
Although I converted upstream coreutils to git last month, I just
reconverted coreutils once again, as a test, and ended up with a
git repository of about 130MB (contrast with my packed git repo of
size 52MB). That was because there were a lot of commits (but < 1024)
after the final automatic "git-repack -a -d".
Running a final
git-repack -a -d && git-prune-packed
cut the final repository size down to the expected size.
So this looks like an easy way to improve git-cvsimport.
Just run "git repack ..." at the end if there's more than
some reasonable amount of not-packed data.
My choice of 1MB is a little arbitrarily. I wouldn't mind missing
the minimal repo size by 1MB. At the other end of the spectrum,
it's probably not worthwhile to pack everything when the total
repository size is less than 1MB.
Here's the patch:
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Although I converted upstream coreutils to git last month, I just
reconverted coreutils once again, as a test, and ended up with a
git repository of about 130MB (contrast with my packed git repo of
size 52MB). That was because there were a lot of commits (but < 1024)
after the final automatic "git-repack -a -d".
Running a final
git-repack -a -d && git-prune-packed
cut the final repository size down to the expected size.
So this looks like an easy way to improve git-cvsimport.
Just run "git repack ..." at the end if there's more than
some reasonable amount of not-packed data.
My choice of 1MB is a little arbitrarily. I wouldn't mind missing
the minimal repo size by 1MB. At the other end of the spectrum,
it's probably not worthwhile to pack everything when the total
repository size is less than 1MB.
Here's the patch:
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Put back shortlog instead of graphiclog in the project list.
Looks like a repo.or.cz-specific change slipped in.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Looks like a repo.or.cz-specific change slipped in.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-checkout: allow pathspec to recover lost working tree directory
It is often wanted on the #git channel that this were to work to
recover removed directory:
rm -fr Documentation
git checkout -- Documentation
git checkout HEAD -- Documentation ;# alternatively
Now it does.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It is often wanted on the #git channel that this were to work to
recover removed directory:
rm -fr Documentation
git checkout -- Documentation
git checkout HEAD -- Documentation ;# alternatively
Now it does.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-checkout: do not allow -f and -m at the same time.
Instead of silently ignoring one over the other, complain on
this incompatible combination.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of silently ignoring one over the other, complain on
this incompatible combination.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Seek back to current filepos when mmap()ing with NO_MMAP
"git-index-pack --fix-thin" relies on mmap() not changing the current
file position (otherwise the pack will be corrupted when writing the
final SHA1). Meet that expectation.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git-index-pack --fix-thin" relies on mmap() not changing the current
file position (otherwise the pack will be corrupted when writing the
final SHA1). Meet that expectation.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
GIT 1.4.4
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'maint'
* maint:
Rework cvsexportcommit to handle binary files for all cases.
Catch errors when writing an index that contains invalid objects.
test-lib.sh: A command dying due to a signal is an unexpected failure.
git-update-index(1): fix use of quoting in section title
* maint:
Rework cvsexportcommit to handle binary files for all cases.
Catch errors when writing an index that contains invalid objects.
test-lib.sh: A command dying due to a signal is an unexpected failure.
git-update-index(1): fix use of quoting in section title
Rework cvsexportcommit to handle binary files for all cases.
Also adds test cases for adding removing and deleting
binary and text files plus two tests for the checks on
binary files.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also adds test cases for adding removing and deleting
binary and text files plus two tests for the checks on
binary files.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Catch errors when writing an index that contains invalid objects.
If git-write-index is called without --missing-ok, it reports invalid
objects that it finds in the index. But without this patch it dies
right away or may run into an infinite loop.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If git-write-index is called without --missing-ok, it reports invalid
objects that it finds in the index. But without this patch it dies
right away or may run into an infinite loop.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
test-lib.sh: A command dying due to a signal is an unexpected failure.
When test_expect_failure detects that a command failed, it still has to
treat a program that crashed from a signal as unexpected failure.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When test_expect_failure detects that a command failed, it still has to
treat a program that crashed from a signal as unexpected failure.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-update-index(1): fix use of quoting in section title
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
GIT 1.4.4-rc2
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'maint'
* maint:
git-cvsserver: read from git with -z to get non-ASCII pathnames.
* maint:
git-cvsserver: read from git with -z to get non-ASCII pathnames.
git-cvsserver: read from git with -z to get non-ASCII pathnames.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'maint'
* maint:
path-list: fix path-list-insert return value
* maint:
path-list: fix path-list-insert return value
path-list: fix path-list-insert return value
When path-list-insert is called on an existing path, it returned an
unrelated element in the list. Luckily most of the callers are
ignoring the return value, but merge-recursive uses it at three places
and this would have resulted in a bogus rename detection.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When path-list-insert is called on an existing path, it returned an
unrelated element in the list. Luckily most of the callers are
ignoring the return value, but merge-recursive uses it at three places
and this would have resulted in a bogus rename detection.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-annotate: fix -S on graft file with comments.
The graft file can contain comment lines and read_graft_line can
return NULL for such an input, which should be skipped by the
reader.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The graft file can contain comment lines and read_graft_line can
return NULL for such an input, which should be skipped by the
reader.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-annotate: no need to exec blame; it is built-in now.
Merge branch 'maint'
* maint:
git-rebase: Use --ignore-if-in-upstream option when executing git-format-patch.
git-svn: fix dcommit losing changes when out-of-date from svn
git-svn: don't die on rebuild when --upgrade is specified
git-svn: avoid printing filenames of files we're not tracking
* maint:
git-rebase: Use --ignore-if-in-upstream option when executing git-format-patch.
git-svn: fix dcommit losing changes when out-of-date from svn
git-svn: don't die on rebuild when --upgrade is specified
git-svn: avoid printing filenames of files we're not tracking
git-rebase: Use --ignore-if-in-upstream option when executing git-format-patch.
This reduces the number of conflicts when rebasing after a series of
patches to the same piece of code is committed upstream.
Signed-off-by: Robert Shearman <rob@codeweavers.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reduces the number of conflicts when rebasing after a series of
patches to the same piece of code is committed upstream.
Signed-off-by: Robert Shearman <rob@codeweavers.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation: move blame examples
This moves the example to specify a line range with regexps to
a later part of the manual page that has similar examples.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the example to specify a line range with regexps to
a later part of the manual page that has similar examples.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'maint'
* maint:
Nicer error messages in case saving an object to db goes wrong
* maint:
Nicer error messages in case saving an object to db goes wrong
git-svn: fix dcommit losing changes when out-of-date from svn
There was a bug in dcommit (and commit-diff) which caused deltas
to be generated against the latest version of the changed file
in a repository, and not the revision we are diffing (the tree)
against locally.
This bug can cause recent changes to the svn repository to be
silently clobbered by git-svn if our repository is out-of-date.
Thanks to Steven Grimm for noticing the bug.
The (few) people using the commit-diff command are now required
to use the -r/--revision argument. dcommit usage is unchanged.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There was a bug in dcommit (and commit-diff) which caused deltas
to be generated against the latest version of the changed file
in a repository, and not the revision we are diffing (the tree)
against locally.
This bug can cause recent changes to the svn repository to be
silently clobbered by git-svn if our repository is out-of-date.
Thanks to Steven Grimm for noticing the bug.
The (few) people using the commit-diff command are now required
to use the -r/--revision argument. dcommit usage is unchanged.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: don't die on rebuild when --upgrade is specified
--copy-remote and --upgrade are rarely (never?) used together,
so if --copy-remote is specified, that means the user really
wanted to copy the remote ref, and we should fail if that fails.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
--copy-remote and --upgrade are rarely (never?) used together,
so if --copy-remote is specified, that means the user really
wanted to copy the remote ref, and we should fail if that fails.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: avoid printing filenames of files we're not tracking
This is purely an aesthetic change, we already skip importing of
files that don't affect the subdirectory we import.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is purely an aesthetic change, we already skip importing of
files that don't affect the subdirectory we import.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Nicer error messages in case saving an object to db goes wrong
Currently the error e.g. when pushing to a read-only repository is quite
confusing, this attempts to clean it up, unifies error reporting between
various object writers and uses error() on couple more places.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently the error e.g. when pushing to a read-only repository is quite
confusing, this attempts to clean it up, unifies error reporting between
various object writers and uses error() on couple more places.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: fix unmatched div in commitdiff
When the last filepair changed only metainfo we failed to close the
extended header <div>.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When the last filepair changed only metainfo we failed to close the
extended header <div>.
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: protect commit messages from controls.
The same change as the previous. It is rather sad that commit log
message parser gives list of chomped lines while tag message parser
gives unchomped ones.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The same change as the previous. It is rather sad that commit log
message parser gives list of chomped lines while tag message parser
gives unchomped ones.
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: protect blob and diff output lines from controls.
This revealed that the output from blame and tag was not chomped
properly and was relying on HTML output not noticing that extra
whitespace that resulted from the newline, which was also fixed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This revealed that the output from blame and tag was not chomped
properly and was relying on HTML output not noticing that extra
whitespace that resulted from the newline, which was also fixed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-pickaxe: retire pickaxe
Just make it take over blame's place. Documentation and command
have all stopped mentioning "git-pickaxe". The built-in synonym
is left in the command table, so you can still say "git pickaxe",
but it probably is a good idea to retire it as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just make it take over blame's place. Documentation and command
have all stopped mentioning "git-pickaxe". The built-in synonym
is left in the command table, so you can still say "git pickaxe",
but it probably is a good idea to retire it as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge git://git.kernel.org/pub/scm/gitk/gitk
* git://git.kernel.org/pub/scm/gitk/gitk:
[PATCH] gitk: Fix nextfile() and add prevfile()
* git://git.kernel.org/pub/scm/gitk/gitk:
[PATCH] gitk: Fix nextfile() and add prevfile()
git-status: quote LF in its output
Otherwise, commit log template would get the remainder of the
filename start on a new line unquoted and the log gets messed
up.
I initially considered using the full quote_c_style(), but the
output from the command is primarily for human consumption so
chose to leave other control characters and bytes with high-bits
unmolested.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise, commit log template would get the remainder of the
filename start on a new line unquoted and the log gets messed
up.
I initially considered using the full quote_c_style(), but the
output from the command is primarily for human consumption so
chose to leave other control characters and bytes with high-bits
unmolested.
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: do not give blame link unconditionally in diff-tree view
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: New improved patchset view
Replace "gitweb diff header" with its full sha1 of blobs and replace
it by "git diff" header and extended diff header. Change also somewhat
highlighting of diffs.
Added `file_type_long' subroutine to convert file mode in octal to
file type description (only for file modes which used by git).
Changes:
* "gitweb diff header" which looked for example like below:
file:_<sha1 before>_ -> file:_<sha1 after>_
where 'file' is file type and '<sha1>' is full sha1 of blob is
changed to
diff --git _a/<file before>_ _b/<file after>_
In both cases links are visible and use default link style. If file
is added, a/<file> is not hyperlinked. If file is deleted, b/<file>
is not hyperlinked.
* there is added "extended diff header", with <path> and <hash>
hyperlinked (and <hash> shortened to 7 characters), and <mode>
explained: '<mode>' is extended to '<mode> (<file type description>)',
where added text is slightly lighter to easy distinguish that it
was added (and it is difference from git-diff output).
* from-file/to-file two-line header lines have slightly darker color
than removed/added lines.
* chunk header has now delicate line above for easier finding chunk
boundary, and top margin of 2px, both barely visible.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Replace "gitweb diff header" with its full sha1 of blobs and replace
it by "git diff" header and extended diff header. Change also somewhat
highlighting of diffs.
Added `file_type_long' subroutine to convert file mode in octal to
file type description (only for file modes which used by git).
Changes:
* "gitweb diff header" which looked for example like below:
file:_<sha1 before>_ -> file:_<sha1 after>_
where 'file' is file type and '<sha1>' is full sha1 of blob is
changed to
diff --git _a/<file before>_ _b/<file after>_
In both cases links are visible and use default link style. If file
is added, a/<file> is not hyperlinked. If file is deleted, b/<file>
is not hyperlinked.
* there is added "extended diff header", with <path> and <hash>
hyperlinked (and <hash> shortened to 7 characters), and <mode>
explained: '<mode>' is extended to '<mode> (<file type description>)',
where added text is slightly lighter to easy distinguish that it
was added (and it is difference from git-diff output).
* from-file/to-file two-line header lines have slightly darker color
than removed/added lines.
* chunk header has now delicate line above for easier finding chunk
boundary, and top margin of 2px, both barely visible.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Use character or octal escape codes (and add span.cntrl) in esc_path
Instead of simply hiding control characters in esc_path by replacing
them with '?', use Character Escape Codes (CEC) i.e. alphabetic
backslash sequences like those found in C programming language and
many other languages influenced by it, such as Java and Perl. If
control characted doesn't have corresponding character escape code,
use octal char sequence to escape it.
Alternatively, controls can be replaced with Unicode Control
Pictures U+2400 - U+243F (9216 - 9279), the Unicode characters
reserved for representing control characters when it is
necessary to print or display them.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of simply hiding control characters in esc_path by replacing
them with '?', use Character Escape Codes (CEC) i.e. alphabetic
backslash sequences like those found in C programming language and
many other languages influenced by it, such as Java and Perl. If
control characted doesn't have corresponding character escape code,
use octal char sequence to escape it.
Alternatively, controls can be replaced with Unicode Control
Pictures U+2400 - U+243F (9216 - 9279), the Unicode characters
reserved for representing control characters when it is
necessary to print or display them.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Better git-unquoting and gitweb-quoting of pathnames
Extend unquote subroutine, which unquotes quoted and escaped filenames
which git may return, to deal not only with octal char sequence
quoting, but also quoting ordinary characters including '\"' and '\\'
which are respectively quoted '"' and '\', and to deal also with
C escape sequences including '\t' for TAB and '\n' for LF.
Add esc_path subroutine for gitweb quoting and HTML escaping filenames
(currently it does equivalent of ls' --hide-control-chars, which means
showing undisplayable characters (including '\n' and '\t') as '?'
(question mark) character, and use 'span' element with cntrl CSS class
to help rendering them differently.
Convert gitweb to use esc_path correctly to print pathnames.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Extend unquote subroutine, which unquotes quoted and escaped filenames
which git may return, to deal not only with octal char sequence
quoting, but also quoting ordinary characters including '\"' and '\\'
which are respectively quoted '"' and '\', and to deal also with
C escape sequences including '\t' for TAB and '\n' for LF.
Add esc_path subroutine for gitweb quoting and HTML escaping filenames
(currently it does equivalent of ls' --hide-control-chars, which means
showing undisplayable characters (including '\n' and '\t') as '?'
(question mark) character, and use 'span' element with cntrl CSS class
to help rendering them differently.
Convert gitweb to use esc_path correctly to print pathnames.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: minimally fix "fork" support.
A forked project is defined to be $projname/$forkname.git for
$projname.git; the code did not check this correctly and mistook
$projname/.git to be a fork of itself. This minimally fixes the
breakage.
Also forks were not checked when index.aux file was in use.
Listing the forked ones in index.aux would show them also on the
toplevel index which may go against the hierarchical nature of
forks, but again this is a minimal fix to whip it in a better
shape suitable to be in the 'master' branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A forked project is defined to be $projname/$forkname.git for
$projname.git; the code did not check this correctly and mistook
$projname/.git to be a fork of itself. This minimally fixes the
breakage.
Also forks were not checked when index.aux file was in use.
Listing the forked ones in index.aux would show them also on the
toplevel index which may go against the hierarchical nature of
forks, but again this is a minimal fix to whip it in a better
shape suitable to be in the 'master' branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: fix disabling of "forks"
Apparently this code was never tested without "forks". check-feature
returns a one-element list (0) when disabled, and assigning that to a
scalar variable made it to be called in a scalar context, which meant
my $check_forks = gitweb_check_feature("forks") were always 1!
Signed-off-by: Junio C Hamano <junkio@cox.net>
Apparently this code was never tested without "forks". check-feature
returns a one-element list (0) when disabled, and assigning that to a
scalar variable made it to be called in a scalar context, which meant
my $check_forks = gitweb_check_feature("forks") were always 1!
Signed-off-by: Junio C Hamano <junkio@cox.net>
GIT 1.4.3-rc1
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'maint'
* maint:
remove an unneeded test
* maint:
remove an unneeded test
Merge branch 'jc/pickaxe'
git-pickaxe: allow "-L <something>,+N"
With this,
git pickaxe -L '/--progress/,+20' v1.4.0 -- pack-objects.c
gives you 20 lines starting from the first occurrence of
'--progress' in pack-objects, digging from v1.4.0 version.
You can also say
git pickaxe -L '/--progress/,-5' v1.4.0 -- pack-objects.c
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this,
git pickaxe -L '/--progress/,+20' v1.4.0 -- pack-objects.c
gives you 20 lines starting from the first occurrence of
'--progress' in pack-objects, digging from v1.4.0 version.
You can also say
git pickaxe -L '/--progress/,-5' v1.4.0 -- pack-objects.c
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-pack-objects progress flag documentation and cleanup
This adds documentation for --progress and --all-progress, remove a
duplicate --progress handling and make usage string more readable.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds documentation for --progress and --all-progress, remove a
duplicate --progress handling and make usage string more readable.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
remove an unneeded test
In wt-status.c there is a test which does nothing.
This patch removes it.
Signed-off-by: Tero Roponen <teanropo@jyu.fi>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In wt-status.c there is a test which does nothing.
This patch removes it.
Signed-off-by: Tero Roponen <teanropo@jyu.fi>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'jc/read-tree'
* jc/read-tree:
t6022: ignoring untracked files by merge-recursive when they do not matter
merge-recursive: adjust to loosened "working file clobbered" check
merge-recursive: make a few functions static.
merge-recursive: use abbreviated commit object name.
merge: loosen overcautious "working file will be lost" check.
* jc/read-tree:
t6022: ignoring untracked files by merge-recursive when they do not matter
merge-recursive: adjust to loosened "working file clobbered" check
merge-recursive: make a few functions static.
merge-recursive: use abbreviated commit object name.
merge: loosen overcautious "working file will be lost" check.
Merge branch 'np/index-pack'
* np/index-pack:
remove .keep pack lock files when done with refs update
have index-pack create .keep file more carefully
improve fetch-pack's handling of kept packs
git-fetch can use both --thin and --keep with fetch-pack now
Teach receive-pack how to keep pack files based on object count.
Allow pack header preprocessing before unpack-objects/index-pack.
Remove unused variable in receive-pack.
Revert "send-pack --keep: do not explode into loose objects on the receiving end."
missing small substitution
Teach git-index-pack how to keep a pack file.
Only repack active packs by skipping over kept packs.
Allow short pack names to git-pack-objects --unpacked=.
send-pack --keep: do not explode into loose objects on the receiving end.
index-pack: minor fixes to comment and function name
enhance clone and fetch -k experience
mimic unpack-objects when --stdin is used with index-pack
add progress status to index-pack
make index-pack able to complete thin packs.
enable index-pack streaming capability
* np/index-pack:
remove .keep pack lock files when done with refs update
have index-pack create .keep file more carefully
improve fetch-pack's handling of kept packs
git-fetch can use both --thin and --keep with fetch-pack now
Teach receive-pack how to keep pack files based on object count.
Allow pack header preprocessing before unpack-objects/index-pack.
Remove unused variable in receive-pack.
Revert "send-pack --keep: do not explode into loose objects on the receiving end."
missing small substitution
Teach git-index-pack how to keep a pack file.
Only repack active packs by skipping over kept packs.
Allow short pack names to git-pack-objects --unpacked=.
send-pack --keep: do not explode into loose objects on the receiving end.
index-pack: minor fixes to comment and function name
enhance clone and fetch -k experience
mimic unpack-objects when --stdin is used with index-pack
add progress status to index-pack
make index-pack able to complete thin packs.
enable index-pack streaming capability
Merge branch 'maint'
* maint:
Documentation: Transplanting branch with git-rebase --onto
merge-recursive implicitely depends on trust_executable_bit
adjust_shared_perm: chmod() only when needed.
Fix git-runstatus for repositories containing a file named HEAD
* maint:
Documentation: Transplanting branch with git-rebase --onto
merge-recursive implicitely depends on trust_executable_bit
adjust_shared_perm: chmod() only when needed.
Fix git-runstatus for repositories containing a file named HEAD
git-pickaxe: -L /regexp/,/regexp/
With this change, you can specify the beginning and the ending
line of the range you wish to inspect with pattern matching.
For example, these are equivalent with the git.git sources:
git pickaxe -L 7,21 v1.4.0 -- commit.c
git pickaxe -L '/^struct sort_node/,/^}/' v1.4.0 -- commit.c
git pickaxe -L '7,/^}/' v1.4.0 -- commit.c
git pickaxe -L '/^struct sort_node/,21' v1.4.0 -- commit.c
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this change, you can specify the beginning and the ending
line of the range you wish to inspect with pattern matching.
For example, these are equivalent with the git.git sources:
git pickaxe -L 7,21 v1.4.0 -- commit.c
git pickaxe -L '/^struct sort_node/,/^}/' v1.4.0 -- commit.c
git pickaxe -L '7,/^}/' v1.4.0 -- commit.c
git pickaxe -L '/^struct sort_node/,21' v1.4.0 -- commit.c
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation: Transplanting branch with git-rebase --onto
Added example of transplantig feature branch from one development
branch (for example "next") into the other development branch (for
example "master").
[jc: talking Carl's advice this contains both examples sent to
the list by Jakub in his original message.]
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Added example of transplantig feature branch from one development
branch (for example "next") into the other development branch (for
example "master").
[jc: talking Carl's advice this contains both examples sent to
the list by Jakub in his original message.]
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document git-pack-refs and link it to git(7).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
merge-recursive implicitely depends on trust_executable_bit
Read the configuration in to get core.filemode value for this
particular repository.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Read the configuration in to get core.filemode value for this
particular repository.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
adjust_shared_perm: chmod() only when needed.
When widening permission for files and directories in a 'shared'
repository for a user with inappropriate umask() setting for
shared work, make sure we call chmod() only when we actually
need to.
The primary idea owes credit to Johannes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When widening permission for files and directories in a 'shared'
repository for a user with inappropriate umask() setting for
shared work, make sure we call chmod() only when we actually
need to.
The primary idea owes credit to Johannes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix git-runstatus for repositories containing a file named HEAD
The wt_status_print_updated() and wt_status_print_untracked() routines
call setup_revisions() with 'HEAD' being the reference to the tip of the
current branch. However, setup_revisions() gets confused if the branch
also contains a file named 'HEAD' resulting in a fatal error.
Instead, don't pass an argv to setup_revisions() at all; simply give it no
arguments, and make 'HEAD' the default revision.
Bug noticed by Rocco Rutte <pdmef@gmx.net>.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The wt_status_print_updated() and wt_status_print_untracked() routines
call setup_revisions() with 'HEAD' being the reference to the tip of the
current branch. However, setup_revisions() gets confused if the branch
also contains a file named 'HEAD' resulting in a fatal error.
Instead, don't pass an argv to setup_revisions() at all; simply give it no
arguments, and make 'HEAD' the default revision.
Bug noticed by Rocco Rutte <pdmef@gmx.net>.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove more sed invocations from within bash completion.
This change removes between 1 and 4 sed invocations per completion
entered by the user. In the case of cat-file the 4 invocations per
completion can take a while on Cygwin; running these replacements
directly within bash saves some time for the end user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This change removes between 1 and 4 sed invocations per completion
entered by the user. In the case of cat-file the 4 invocations per
completion can take a while on Cygwin; running these replacements
directly within bash saves some time for the end user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Support bash completion on symmetric difference operator.
Now that log, whatchanged, rev-list, etc. support the symmetric
difference operator '...' we should provide bash completion for it
just like we do for '..'.
While we are at it we can remove two sed invocations during the
interactive prompt and replace them with internal bash operations.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that log, whatchanged, rev-list, etc. support the symmetric
difference operator '...' we should provide bash completion for it
just like we do for '..'.
While we are at it we can remove two sed invocations during the
interactive prompt and replace them with internal bash operations.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Take --git-dir into consideration during bash completion.
If the user has setup a command line of "git --git-dir=baz" then
anything we complete must be performed within the scope of "baz"
and not the current working directory.
This is useful with commands such as "git --git-dir=git.git log m"
to complete out "master" and view the log for the master branch of
the git.git repository. As a nice side effect this also works for
aliases within the target repository, just as git would honor them.
Unfortunately because we still examine arguments by absolute position
in most of the more complex commands (e.g. git push) using --git-dir
with those commands will probably still cause completion to fail.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user has setup a command line of "git --git-dir=baz" then
anything we complete must be performed within the scope of "baz"
and not the current working directory.
This is useful with commands such as "git --git-dir=git.git log m"
to complete out "master" and view the log for the master branch of
the git.git repository. As a nice side effect this also works for
aliases within the target repository, just as git would honor them.
Unfortunately because we still examine arguments by absolute position
in most of the more complex commands (e.g. git push) using --git-dir
with those commands will probably still cause completion to fail.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Bash completion support for remotes in .git/config.
Now that Git natively supports remote specifications within the
config file such as:
[remote "origin"]
url = ...
we should provide bash completion support "out of the box" for
these remotes, just like we do for the .git/remotes directory.
Also cleaned up the __git_aliases expansion to use the same form
of querying and filtering repo-config as this saves two fork/execs
in the middle of a user prompted completion. Finally also forced
the variable 'word' to be local within __git_aliased_command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that Git natively supports remote specifications within the
config file such as:
[remote "origin"]
url = ...
we should provide bash completion support "out of the box" for
these remotes, just like we do for the .git/remotes directory.
Also cleaned up the __git_aliases expansion to use the same form
of querying and filtering repo-config as this saves two fork/execs
in the middle of a user prompted completion. Finally also forced
the variable 'word' to be local within __git_aliased_command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Only load .exe suffix'd completions on Cygwin.
The only platform which actually needs to define .exe suffixes as
part of its completion set is Cygwin. So don't define them on any
other platform.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only platform which actually needs to define .exe suffixes as
part of its completion set is Cygwin. So don't define them on any
other platform.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Added missing completions for show-branch and merge-base.
The show-branch and merge-base commands were partially supported
when it came to bash completions as they were only specified in
one form another. Now we specify them in both forms.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The show-branch and merge-base commands were partially supported
when it came to bash completions as they were only specified in
one form another. Now we specify them in both forms.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-pickaxe: optimize by avoiding repeated read_sha1_file().
It turns out that pickaxe reads the same blob repeatedly while
blame can reuse the blob already read for the parent when
handling a child commit when it's parent's turn to pass its
blame to the grandparent. Have a cache in the origin structure
to keep the blob there, which will be garbage collected when the
origin loses the last reference to it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It turns out that pickaxe reads the same blob repeatedly while
blame can reuse the blob already read for the parent when
handling a child commit when it's parent's turn to pass its
blame to the grandparent. Have a cache in the origin structure
to keep the blob there, which will be garbage collected when the
origin loses the last reference to it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-blame: add internal statistics to count read blobs.
cherry is built-in, do not ship git-cherry.sh
Noticed by Rene; Makefile now has another maintainer's check
target to catch this kind of mistakes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Noticed by Rene; Makefile now has another maintainer's check
target to catch this kind of mistakes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'maint'
* maint:
Remove unsupported C99 style struct initializers in git-archive.
Remove SIMPLE_PROGRAMS and make git-daemon a normal program.
Use ULONG_MAX rather than implicit cast of -1.
* maint:
Remove unsupported C99 style struct initializers in git-archive.
Remove SIMPLE_PROGRAMS and make git-daemon a normal program.
Use ULONG_MAX rather than implicit cast of -1.
Remove unsupported C99 style struct initializers in git-archive.
At least one older version of the Solaris C compiler doesn't support
the newer C99 style struct initializers. To allow Git to compile
on those systems use an archive description struct which is easier
to initialize without the C99 struct initializer syntax.
Also since the archives array is not used by anyone other than
archive.c we can make it static.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
At least one older version of the Solaris C compiler doesn't support
the newer C99 style struct initializers. To allow Git to compile
on those systems use an archive description struct which is easier
to initialize without the C99 struct initializer syntax.
Also since the archives array is not used by anyone other than
archive.c we can make it static.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove SIMPLE_PROGRAMS and make git-daemon a normal program.
Some platforms (Solaris in particular) appear to require -lz as
part of the link line for git-daemon, due to it linking against
sha1_file.o and that module requiring inflate/deflate support.
So its time to retire SIMPLE_PROGRAMS and move its last remaining
member into the standard PROGRAMS list, allowing it to link against
all libraries used by the rest of Git.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some platforms (Solaris in particular) appear to require -lz as
part of the link line for git-daemon, due to it linking against
sha1_file.o and that module requiring inflate/deflate support.
So its time to retire SIMPLE_PROGRAMS and move its last remaining
member into the standard PROGRAMS list, allowing it to link against
all libraries used by the rest of Git.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use ULONG_MAX rather than implicit cast of -1.
At least one (older) version of the Solaris C compiler won't allow
'unsigned long x = -1' without explicitly casting -1 to a type of
unsigned long. So instead use ULONG_MAX, which is really the
correct constant anyway.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
At least one (older) version of the Solaris C compiler won't allow
'unsigned long x = -1' without explicitly casting -1 to a type of
unsigned long. So instead use ULONG_MAX, which is really the
correct constant anyway.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: don't die on rebuild when --upgrade is specified
--copy-remote and --upgrade are rarely (never?) used together,
so if --copy-remote is specified, that means the user really
wanted to copy the remote ref, and we should fail if that fails.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
--copy-remote and --upgrade are rarely (never?) used together,
so if --copy-remote is specified, that means the user really
wanted to copy the remote ref, and we should fail if that fails.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: avoid printing filenames of files we're not tracking
This is purely an aesthetic change, we already skip importing of
files that don't affect the subdirectory we import.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is purely an aesthetic change, we already skip importing of
files that don't affect the subdirectory we import.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-pickaxe: fix origin refcounting
When we introduced the cached origin per commit, we gave up proper
garbage collecting because it meant that commits hold onto their
cached copy. There is no need to do so.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we introduced the cached origin per commit, we gave up proper
garbage collecting because it meant that commits hold onto their
cached copy. There is no need to do so.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'np/verbose-push'
* np/verbose-push:
make git-push a bit more verbose
* np/verbose-push:
make git-push a bit more verbose
Merge branch 'lt/push-config'
* lt/push-config:
git push: add verbose flag and allow overriding of default target repository
Allow '-' in config variable names
* lt/push-config:
git push: add verbose flag and allow overriding of default target repository
Allow '-' in config variable names
Added bash completion support for git-reset.
Completion for the --hard/--soft/--mixed modes of operation as
well as a ref name for <commit-ish> can be very useful and save
some fingers.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Completion for the --hard/--soft/--mixed modes of operation as
well as a ref name for <commit-ish> can be very useful and save
some fingers.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Added completion support for git-branch.exe.
On Cygwin a user might complete the new git-branch builtin as
git-branch.exe, at which point bash requires a new completion
registration for the command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On Cygwin a user might complete the new git-branch builtin as
git-branch.exe, at which point bash requires a new completion
registration for the command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'pb/web'
* pb/web:
gitweb: Support for 'forks'
* pb/web:
gitweb: Support for 'forks'
git-pickaxe: re-scan the blob after making progress with -C
The reason to do this is the same as in the previous change for
line copy detection within the same file (-M).
Also this fixes -C and -C -C (aka find-copies-harder) logic; in
this application we are not interested in the similarity
matching diffcore-rename makes, because we are only interested
in scanning files that were modified, or in the case of -C -C,
scanning all files in the parent and we want to do that
ourselves.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The reason to do this is the same as in the previous change for
line copy detection within the same file (-M).
Also this fixes -C and -C -C (aka find-copies-harder) logic; in
this application we are not interested in the similarity
matching diffcore-rename makes, because we are only interested
in scanning files that were modified, or in the case of -C -C,
scanning all files in the parent and we want to do that
ourselves.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-pickaxe: re-scan the blob after making progress with -M
Otherwise we would miss copied lines that are contained in the
parts before or after the part that we find after splitting the
blame_entry (i.e. split[0] and split[2]).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise we would miss copied lines that are contained in the
parts before or after the part that we find after splitting the
blame_entry (i.e. split[0] and split[2]).
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-pickaxe: simplify Octopus merges further
If more than one parents in an Octopus merge have the same
origin, ignore later ones because it would not make any
difference in the outcome.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If more than one parents in an Octopus merge have the same
origin, ignore later ones because it would not make any
difference in the outcome.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-pickaxe: rename detection optimization
The idea is that we are interested in renaming into only one path, so
we do not care about renames that happen elsewhere.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The idea is that we are interested in renaming into only one path, so
we do not care about renames that happen elsewhere.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'maint'
* maint:
apply: handle "traditional" creation/deletion diff correctly.
* maint:
apply: handle "traditional" creation/deletion diff correctly.
apply: handle "traditional" creation/deletion diff correctly.
We deduced a GNU diff output that does not use /dev/null convention
as creation (deletion) diff correctly by looking at the lack of context
and deleted lines (added lines), but forgot to reset the new (old) name
field properly.
This was a regression when we added a workaround for --unified=0 insanity.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We deduced a GNU diff output that does not use /dev/null convention
as creation (deletion) diff correctly by looking at the lack of context
and deleted lines (added lines), but forgot to reset the new (old) name
field properly.
This was a regression when we added a workaround for --unified=0 insanity.
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Remove extra "/" in path names for git_get_project_list
Without this change we get a wrong $pfxlen value and the check_export_ok()
checks with with a wrong directory name. Without this patch the below
$projects_list fails with gitweb
$projects_list = "/tmp/a/b/";
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without this change we get a wrong $pfxlen value and the check_export_ok()
checks with with a wrong directory name. Without this patch the below
$projects_list fails with gitweb
$projects_list = "/tmp/a/b/";
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git.el: Include MERGE_MSG in the log-edit buffer even when not committing a merge.
This lets us take advantage of the fact that git-cherry-pick now saves
the message in MERGE_MSG too.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This lets us take advantage of the fact that git-cherry-pick now saves
the message in MERGE_MSG too.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git.el: Move point after the log message header when entering log-edit mode.
Suggested by Han-Wen Nienhuys.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Suggested by Han-Wen Nienhuys.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git.el: Added a function to open the current file in another window.
Bound to 'o' by default, compatible with pcl-cvs and
buffer-mode. Suggested by Han-Wen Nienhuys.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Bound to 'o' by default, compatible with pcl-cvs and
buffer-mode. Suggested by Han-Wen Nienhuys.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git.el: Added functions for moving to the next/prev unmerged file.
This is useful when doing a merge that changes many files with only a
few conflicts here and there.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is useful when doing a merge that changes many files with only a
few conflicts here and there.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
remove .keep pack lock files when done with refs update
This makes both git-fetch and git-push (fetch-pack and receive-pack)
safe against a possible race with aparallel git-repack -a -d that could
prune the new pack while it is not yet referenced, and remove the .keep
file after refs have been updated.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes both git-fetch and git-push (fetch-pack and receive-pack)
safe against a possible race with aparallel git-repack -a -d that could
prune the new pack while it is not yet referenced, and remove the .keep
file after refs have been updated.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
have index-pack create .keep file more carefully
If by chance we receive a pack which content (list of objects) matches
another pack that we already have, and if that pack is marked with a
.keep file, then we should not overwrite it.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If by chance we receive a pack which content (list of objects) matches
another pack that we already have, and if that pack is marked with a
.keep file, then we should not overwrite it.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
improve fetch-pack's handling of kept packs
Since functions in fetch-clone.c were only used from fetch-pack.c,
its content has been merged with fetch-pack.c. This allows for better
coupling of features with much simpler implementations.
One new thing is that the (abscence of) --thin also enforce it on
index-pack now, such that index-pack will abort if a thin pack was
_not_ asked for.
The -k or --keep, when provided twice, now causes the fetched pack
to be left as a kept pack just like receive-pack currently does.
Eventually this will be used to close a race against concurrent
repacking.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since functions in fetch-clone.c were only used from fetch-pack.c,
its content has been merged with fetch-pack.c. This allows for better
coupling of features with much simpler implementations.
One new thing is that the (abscence of) --thin also enforce it on
index-pack now, such that index-pack will abort if a thin pack was
_not_ asked for.
The -k or --keep, when provided twice, now causes the fetched pack
to be left as a kept pack just like receive-pack currently does.
Eventually this will be used to close a race against concurrent
repacking.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-fetch can use both --thin and --keep with fetch-pack now
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Teach receive-pack how to keep pack files based on object count.
Since keeping a pushed pack or exploding it into loose objects
should be a local repository decision this teaches receive-pack
to decide if it should call unpack-objects or index-pack --stdin
--fix-thin based on the setting of receive.unpackLimit and the
number of objects contained in the received pack.
If the number of objects (hdr_entries) in the received pack is
below the value of receive.unpackLimit (which is 5000 by default)
then we unpack-objects as we have in the past.
If the hdr_entries >= receive.unpackLimit then we call index-pack and
ask it to include our pid and hostname in the .keep file to make it
easier to identify why a given pack has been kept in the repository.
Currently this leaves every received pack as a kept pack. We really
don't want that as received packs will tend to be small. Instead we
want to delete the .keep file automatically after all refs have
been updated. That is being left as room for future improvement.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since keeping a pushed pack or exploding it into loose objects
should be a local repository decision this teaches receive-pack
to decide if it should call unpack-objects or index-pack --stdin
--fix-thin based on the setting of receive.unpackLimit and the
number of objects contained in the received pack.
If the number of objects (hdr_entries) in the received pack is
below the value of receive.unpackLimit (which is 5000 by default)
then we unpack-objects as we have in the past.
If the hdr_entries >= receive.unpackLimit then we call index-pack and
ask it to include our pid and hostname in the .keep file to make it
easier to identify why a given pack has been kept in the repository.
Currently this leaves every received pack as a kept pack. We really
don't want that as received packs will tend to be small. Instead we
want to delete the .keep file automatically after all refs have
been updated. That is being left as room for future improvement.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow pack header preprocessing before unpack-objects/index-pack.
Some applications which invoke unpack-objects or index-pack --stdin
may want to examine the pack header to determine the number of
objects contained in the pack and use that value to determine which
executable to invoke to handle the rest of the pack stream.
However if the caller consumes the pack header from the input stream
then its no longer available for unpack-objects or index-pack --stdin,
both of which need the version and object count to process the stream.
This change introduces --pack_header=ver,cnt as a command line option
that the caller can supply to indicate it has already consumed the
pack header and what version and object count were found in that
header. As this option is only meant for low level applications
such as receive-pack we are not documenting it at this time.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some applications which invoke unpack-objects or index-pack --stdin
may want to examine the pack header to determine the number of
objects contained in the pack and use that value to determine which
executable to invoke to handle the rest of the pack stream.
However if the caller consumes the pack header from the input stream
then its no longer available for unpack-objects or index-pack --stdin,
both of which need the version and object count to process the stream.
This change introduces --pack_header=ver,cnt as a command line option
that the caller can supply to indicate it has already consumed the
pack header and what version and object count were found in that
header. As this option is only meant for low level applications
such as receive-pack we are not documenting it at this time.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'master' into np/index-pack
* master: (90 commits)
gitweb: Better support for non-CSS aware web browsers
gitweb: Output also empty patches in "commitdiff" view
gitweb: Use git-for-each-ref to generate list of heads and/or tags
for-each-ref: "creator" and "creatordate" fields
Add --global option to git-repo-config.
pack-refs: Store the full name of the ref even when packing only tags.
git-clone documentation didn't mention --origin as equivalent of -o
Minor grammar fixes for git-diff-index.txt
link_temp_to_file: call adjust_shared_perm() only when we created the directory
Remove uneccessarily similar printf() from print_ref_list() in builtin-branch
pack-objects doesn't create random pack names
branch: work in subdirectories.
gitweb: Use 's' regexp modifier to secure against filenames with LF
gitweb: Secure against commit-ish/tree-ish with the same name as path
gitweb: esc_html() author in blame
git-svnimport: support for partial imports
link_temp_to_file: don't leave the path truncated on adjust_shared_perm failure
Move deny_non_fast_forwards handling completely into receive-pack.
revision traversal: --unpacked does not limit commit list anymore.
Continue traversal when rev-list --unpacked finds a packed commit.
...
* master: (90 commits)
gitweb: Better support for non-CSS aware web browsers
gitweb: Output also empty patches in "commitdiff" view
gitweb: Use git-for-each-ref to generate list of heads and/or tags
for-each-ref: "creator" and "creatordate" fields
Add --global option to git-repo-config.
pack-refs: Store the full name of the ref even when packing only tags.
git-clone documentation didn't mention --origin as equivalent of -o
Minor grammar fixes for git-diff-index.txt
link_temp_to_file: call adjust_shared_perm() only when we created the directory
Remove uneccessarily similar printf() from print_ref_list() in builtin-branch
pack-objects doesn't create random pack names
branch: work in subdirectories.
gitweb: Use 's' regexp modifier to secure against filenames with LF
gitweb: Secure against commit-ish/tree-ish with the same name as path
gitweb: esc_html() author in blame
git-svnimport: support for partial imports
link_temp_to_file: don't leave the path truncated on adjust_shared_perm failure
Move deny_non_fast_forwards handling completely into receive-pack.
revision traversal: --unpacked does not limit commit list anymore.
Continue traversal when rev-list --unpacked finds a packed commit.
...
gitweb: Better support for non-CSS aware web browsers
Add option to replace SPC (' ') with hard (non-breakable) space HTML
entity ' ' in esc_html subroutine.
Replace ' ' with ' ' for the code/diff display part in git_blob
and git_patchset_body; this is to be able to view code and diffs in
web browsers which doesn't understand "white-space: pre;" CSS
declaration.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add option to replace SPC (' ') with hard (non-breakable) space HTML
entity ' ' in esc_html subroutine.
Replace ' ' with ' ' for the code/diff display part in git_blob
and git_patchset_body; this is to be able to view code and diffs in
web browsers which doesn't understand "white-space: pre;" CSS
declaration.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Output also empty patches in "commitdiff" view
Remove skipping over empty patches (i.e. patches which consist solely
of extended headers) in git_patchset_body, and add links to those
header-only patches in git_difftree_body (but not generate blobdiff
links when there were no change in file contents).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove skipping over empty patches (i.e. patches which consist solely
of extended headers) in git_patchset_body, and add links to those
header-only patches in git_difftree_body (but not generate blobdiff
links when there were no change in file contents).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'sp/keep-pack' into np/index-pack
* sp/keep-pack: (29 commits)
Remove unused variable in receive-pack.
Teach git-index-pack how to keep a pack file.
Only repack active packs by skipping over kept packs.
Allow short pack names to git-pack-objects --unpacked=.
git-send-email: Read the default SMTP server from the GIT config file
git-send-email: Document support for local sendmail instead of SMTP server
Swap the porcelain and plumbing commands in the git man page
Mention that pull can work locally in the synopsis
gitweb: Add "next" link to commitdiff view
gitweb: Move git_get_last_activity subroutine earlier
Documentation: fix git-format-patch mark-up and link it from git.txt
Documentation: Update information about <format> in git-for-each-ref
Bash completion support for aliases
gitweb: Fix up bogus $stylesheet declarations
tests: merge-recursive is usable without Python
gitweb: Check git base URLs before generating URL from it
Documentation: add git in /etc/services.
Documentation: add upload-archive service to git-daemon.
git-cherry: document limit and add diagram
diff-format.txt: Correct information about pathnames quoting in patch format
...
* sp/keep-pack: (29 commits)
Remove unused variable in receive-pack.
Teach git-index-pack how to keep a pack file.
Only repack active packs by skipping over kept packs.
Allow short pack names to git-pack-objects --unpacked=.
git-send-email: Read the default SMTP server from the GIT config file
git-send-email: Document support for local sendmail instead of SMTP server
Swap the porcelain and plumbing commands in the git man page
Mention that pull can work locally in the synopsis
gitweb: Add "next" link to commitdiff view
gitweb: Move git_get_last_activity subroutine earlier
Documentation: fix git-format-patch mark-up and link it from git.txt
Documentation: Update information about <format> in git-for-each-ref
Bash completion support for aliases
gitweb: Fix up bogus $stylesheet declarations
tests: merge-recursive is usable without Python
gitweb: Check git base URLs before generating URL from it
Documentation: add git in /etc/services.
Documentation: add upload-archive service to git-daemon.
git-cherry: document limit and add diagram
diff-format.txt: Correct information about pathnames quoting in patch format
...
Merge branch 'maint'
* maint:
git-clone documentation didn't mention --origin as equivalent of -o
Minor grammar fixes for git-diff-index.txt
link_temp_to_file: call adjust_shared_perm() only when we created the directory
* maint:
git-clone documentation didn't mention --origin as equivalent of -o
Minor grammar fixes for git-diff-index.txt
link_temp_to_file: call adjust_shared_perm() only when we created the directory
gitweb: Use git-for-each-ref to generate list of heads and/or tags
Add two subroutines: git_get_heads_list and git_get_refs_list, which
fill out needed parts of refs info (heads and tags respectively) info
using single call to git-for-each-ref, instead of using
git-peek-remote to get list of references and using parse_ref for each
ref to get ref info, which in turn uses at least one call of git
command.
Replace call to git_get_refs_list in git_summary by call to
git_get_references, git_get_heads_list and git_get_tags_list
(simplifying this subroutine a bit). Use git_get_heads_list in
git_heads and git_get_tags_list in git_tags. Modify git_tags_body
slightly to accept output from git_get_tags_list.
Remove no longer used, and a bit hackish, git_get_refs_list.
parse_ref is no longer used, but is left for now.
Generating "summary" and "tags" views should be much faster for
projects which have large number of tags.
CHANGES IN OUTPUT: Before, if ref in refs/tags was tag pointing to
commit we used committer epoch as epoch for ref, and used tagger epoch
as epoch only for tag pointing to object of other type. If ref in
refs/tags was commit, we used committer epoch as epoch for ref (see
parse_ref; we sorted in gitweb by 'epoch' field).
Currently we use committer epoch for refs pointing to commit objects,
and tagger epoch for refs pointing to tag object, even if tag points
to commit.
Simple ab benchmark before and after this patch for my git.git
repository (git/jnareb-git.git) with some heads and tags added
as compared to git.git repository, shows around 2.4-3.0 times speedup
for "summary" and "tags" views:
summary 3134 +/- 24.2 ms --> 1081 +/- 30.2 ms
tags 2886 +/- 18.9 ms --> 1196 +/- 15.6 ms
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add two subroutines: git_get_heads_list and git_get_refs_list, which
fill out needed parts of refs info (heads and tags respectively) info
using single call to git-for-each-ref, instead of using
git-peek-remote to get list of references and using parse_ref for each
ref to get ref info, which in turn uses at least one call of git
command.
Replace call to git_get_refs_list in git_summary by call to
git_get_references, git_get_heads_list and git_get_tags_list
(simplifying this subroutine a bit). Use git_get_heads_list in
git_heads and git_get_tags_list in git_tags. Modify git_tags_body
slightly to accept output from git_get_tags_list.
Remove no longer used, and a bit hackish, git_get_refs_list.
parse_ref is no longer used, but is left for now.
Generating "summary" and "tags" views should be much faster for
projects which have large number of tags.
CHANGES IN OUTPUT: Before, if ref in refs/tags was tag pointing to
commit we used committer epoch as epoch for ref, and used tagger epoch
as epoch only for tag pointing to object of other type. If ref in
refs/tags was commit, we used committer epoch as epoch for ref (see
parse_ref; we sorted in gitweb by 'epoch' field).
Currently we use committer epoch for refs pointing to commit objects,
and tagger epoch for refs pointing to tag object, even if tag points
to commit.
Simple ab benchmark before and after this patch for my git.git
repository (git/jnareb-git.git) with some heads and tags added
as compared to git.git repository, shows around 2.4-3.0 times speedup
for "summary" and "tags" views:
summary 3134 +/- 24.2 ms --> 1081 +/- 30.2 ms
tags 2886 +/- 18.9 ms --> 1196 +/- 15.6 ms
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
for-each-ref: "creator" and "creatordate" fields
This adds "creator" (which is parallel to "tagger" or "committer")
and "creatordate" (corresponds to "taggerdate" and
"committerdate").
As other "date" fields, "creatordate" sorts numerically
and displays human readably. This allows for example for
sorting together heavyweigth and lightweight tags.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Acked-by: Jakub Narebski <jnareb@gmail.com>
This adds "creator" (which is parallel to "tagger" or "committer")
and "creatordate" (corresponds to "taggerdate" and
"committerdate").
As other "date" fields, "creatordate" sorts numerically
and displays human readably. This allows for example for
sorting together heavyweigth and lightweight tags.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Add --global option to git-repo-config.
Allow user to set variables in global ~/.gitconfig file
using command line.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow user to set variables in global ~/.gitconfig file
using command line.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>