Code

git.git
17 years agoImplemented 'tag' command in fast-import.
Shawn O. Pearce [Thu, 24 Aug 2006 07:12:13 +0000 (03:12 -0400)]
Implemented 'tag' command in fast-import.

Tags received from the frontend are generated in memory in a simple
linked list in the order that the tag commands were sent by the
frontend.  If multiple different tag objects for the same tag name
get generated the last one sent by the frontend will be the one
that gets written out at termination.  Multiple tag objects for
the same name will cause all older tags of the same name to be lost.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
17 years agoAdded branch load counter to fast-import.
Shawn O. Pearce [Wed, 23 Aug 2006 08:31:12 +0000 (04:31 -0400)]
Added branch load counter to fast-import.

If the branch load count exceeds the number of branches created then
the frontend is causing fast-import to page branches into and out of
memory due to the way its ordering its commits.  Performance can
likely be increased if the frontend were to alter its commit
sequence such that it stays on one branch before switching to another
branch, then never returns to the prior branch.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
17 years agoAdded mark store/find to fast-import.
Shawn O. Pearce [Wed, 23 Aug 2006 08:17:45 +0000 (04:17 -0400)]
Added mark store/find to fast-import.

Marks are now saved when the mark directive gets used by the frontend
and may be used in place of a SHA1 expression to locate a previous
SHA1 which fast-import may have generated.  This is particularly
useful with commits where the frontend does not (easily) have the
ability to compute the SHA1 for an arbitrary commit but needs it
to generate a branch or tag from that commit.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
17 years agoConverted fast-import to accept standard command line parameters.
Shawn O. Pearce [Wed, 23 Aug 2006 06:00:31 +0000 (02:00 -0400)]
Converted fast-import to accept standard command line parameters.

The following command line options are now accepted before the
pack name:

  --objects=n           # replaces the object count after the pack name
  --depth=n             # delta chain depth to use (default is 10)
  --active-branches=n   # maximum number of branches to keep in memory

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
17 years agoFixed segfault in fast-import after growing a tree.
Shawn O. Pearce [Wed, 23 Aug 2006 05:33:47 +0000 (01:33 -0400)]
Fixed segfault in fast-import after growing a tree.

Growing a tree caused all subtrees to be deallocated and put back
into the free list yet those subtree's contents were still actively
in use.  Consequently they were doled out again and got stomped
on elsewhere.  Releasing a tree is now performed in two parts,
either releasing only the content array or releasing the content
array and recursively releasing the subtree(s).

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
17 years agoAllow symlink blobs in trees during fast-import.
Shawn O. Pearce [Mon, 21 Aug 2006 07:29:13 +0000 (03:29 -0400)]
Allow symlink blobs in trees during fast-import.

If a frontend is smart enough to import a symlink then we should
let them do so.  We'll assume that they were smart enough to first
generate a blob to hold the link target, as that's how symlinks
get represented in GIT.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
17 years agoChanged fast-import's pack header creation to use pack.h
Shawn O. Pearce [Wed, 16 Aug 2006 05:57:57 +0000 (01:57 -0400)]
Changed fast-import's pack header creation to use pack.h

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
17 years agoConverted fast-import to a text based protocol.
Shawn O. Pearce [Tue, 15 Aug 2006 00:16:28 +0000 (20:16 -0400)]
Converted fast-import to a text based protocol.

Frontend clients can now send a text stream to fast-import rather
than a binary stream.  This should facilitate developing frontend
software as the data stream is easier to view, manipulate and debug
my hand and Mark-I eyeball.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
17 years agoImplement blob ID validation in fast-import.
Shawn O. Pearce [Mon, 14 Aug 2006 06:50:18 +0000 (02:50 -0400)]
Implement blob ID validation in fast-import.

When accepting revision SHA1 IDs from the frontend verify the SHA1
actually refers to a blob and is known to exist.  Its an error
to use a SHA1 in a tree if the blob doesn't exist as this would
cause git-fsck-objects to report a missing blob should the pack get
closed without the blob being appended into it or a subsequent pack.
So right now we'll just ask that the frontend "pre-declare" any
blobs it wants to use in a tree before it can use them.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
17 years agoAdded tree and commit writing to fast-import.
Shawn O. Pearce [Mon, 14 Aug 2006 04:58:19 +0000 (00:58 -0400)]
Added tree and commit writing to fast-import.

The tree of the current commit can be altered by file_change commands
before the commit gets written to the pack.  The file changes are
rather primitive as they simply allow removal of a tree entry or
setting/adding a tree entry.

Currently trees and commits aren't being deltafied when written to
the pack and branch reloading from the current pack doesn't work,
so at most 5 branches can be worked with at any one time.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
17 years agoImplemented branch handling and basic tree support in fast-import.
Shawn O. Pearce [Tue, 8 Aug 2006 07:36:45 +0000 (03:36 -0400)]
Implemented branch handling and basic tree support in fast-import.

This provides the basic data structures needed to store trees in
memory while we are processing them for a branch.  What we are
attempting to do is track one complete tree for each branch that
the frontend has registered with us through the 'newb' (new_branch)
command.  When the frontend edits that tree through 'updf' or 'delf'
commands we'll mark the affected tree(s) as being dirty and recompute
their objects during 'comt' (commit).

Currently the protocol is decidedly _not_ user friendly.  I crashed
fast-import by giving it bad input data from Perl.  I may try to
improve upon it, or at least upon its error handling.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
17 years agoAdded basic command handler to fast-import.
Shawn O. Pearce [Tue, 8 Aug 2006 05:14:21 +0000 (01:14 -0400)]
Added basic command handler to fast-import.

Moved the new_blob logic off into a new subroutine and
invoked it when getting the 'blob' command.

Added statistics dump to STDERR when the program terminates listing
what it did at a high level.  This is somewhat interesting.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
17 years agoRefactored fast-import's internals for future additions.
Shawn O. Pearce [Tue, 8 Aug 2006 04:46:13 +0000 (00:46 -0400)]
Refactored fast-import's internals for future additions.

Too many globals variables were being used not not enough
code was resuable to process trees and commits so this is
a simple refactoring of the existing blob processing code
to get into a state that will be easier to handle trees
and commits in.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
17 years agoCleaned up memory allocation for object_entry structs.
Shawn O. Pearce [Tue, 8 Aug 2006 04:03:59 +0000 (00:03 -0400)]
Cleaned up memory allocation for object_entry structs.

Although its easy to ask the user to tell us how many objects they
will need, its probably better to dynamically grow the object table
in large units.  But if the user can give us a hint as to roughly
how many objects then we can still use it during startup.

Also stopped printing the SHA1 strings to stdout as no user is
currently making use of that facility.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
17 years agoAdded automatic index generation to fast-import.
Shawn O. Pearce [Sun, 6 Aug 2006 17:51:39 +0000 (13:51 -0400)]
Added automatic index generation to fast-import.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
17 years agoCreated fast-import, a tool to quickly generating a pack from blobs.
Shawn O. Pearce [Sat, 5 Aug 2006 06:04:21 +0000 (02:04 -0400)]
Created fast-import, a tool to quickly generating a pack from blobs.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
18 years agoConvert memset(hash,0,20) to hashclr(hash).
Junio C Hamano [Wed, 23 Aug 2006 20:57:23 +0000 (13:57 -0700)]
Convert memset(hash,0,20) to hashclr(hash).

In the same spirit as hashcmp() and hashcpy().

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoConvert memcpy(a,b,20) to hashcpy(a,b).
Shawn Pearce [Wed, 23 Aug 2006 06:49:00 +0000 (02:49 -0400)]
Convert memcpy(a,b,20) to hashcpy(a,b).

This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.

A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*.  This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.

[jc: Splitted the patch to "master" part, to be followed by a
 patch for merge-recursive.c which is not in "master" yet.

 Fixed the cast in the latter hunk to combine-diff.c which was
 wrong in the original.

 Also converted ones left-over in combine-diff.c, diff-lib.c and
 upload-pack.c ]

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoFix a comparison bug in diff-delta.c
Pierre Habouzit [Wed, 23 Aug 2006 09:17:55 +0000 (11:17 +0200)]
Fix a comparison bug in diff-delta.c

(1 << i) < hspace is compared in the `int` space rather that in the
unsigned one.  the result will be wrong if hspace is between 0x40000000
and 0x80000000.

Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-send-email: Don't set author_not_sender from Cc: lines
Haavard Skinnemoen [Wed, 23 Aug 2006 10:02:59 +0000 (03:02 -0700)]
git-send-email: Don't set author_not_sender from Cc: lines

When an mbox-style patch contains a Cc: line in the header,
git-send-email will check the address against the sender specified
on the command line. If they don't match, sender_not_author will
be set to the address obtained from the Cc line.

When this happens, git-send-email inserts a From: line at the
beginning of the message body with the address obtained from the
Cc line in the header, and the sender might be accused of forging
patch authors.

This patch fixes this by only updating sender_not_author when
processing From: lines, not when processing Cc: lines.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoRemove unnecessary forward declaration of unpack_entry.
Shawn Pearce [Mon, 21 Aug 2006 07:10:36 +0000 (03:10 -0400)]
Remove unnecessary forward declaration of unpack_entry.

This declaration probably used to be necessary but the code has
been refactored since to use unpack_entry_gently instead.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoVerify we know how to read a pack before trying to using it.
Shawn Pearce [Mon, 21 Aug 2006 07:10:02 +0000 (03:10 -0400)]
Verify we know how to read a pack before trying to using it.

If the pack format were to ever change or be extended in the future
there is no assurance that just because the pack file lives in
objects/pack and doesn't end in .idx that we can read and decompress
its contents properly.

If we encounter what we think is a pack file and it isn't or we don't
recognize its version then die and suggest to the user that they
upgrade to a newer version of GIT which can handle that pack file.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoAdd write_or_die(), a helper function
Rene Scharfe [Mon, 21 Aug 2006 18:43:43 +0000 (20:43 +0200)]
Add write_or_die(), a helper function

The little helper write_or_die() won't come back with bad news about
full disks or broken pipes.  It either succeeds or terminates the
program, making additional error handling unnecessary.

This patch adds the new function and uses it to replace two similar
ones (the one in tar-tree originally has been copied from cat-file
btw.).  I chose to add the fd parameter which both lacked to make
write_or_die() just as flexible as write() and thus suitable for
lib-ification.

There is a regression: error messages emitted by this function don't
show the program name, while the replaced two functions did.  That's
acceptable, I think; a lot of other functions do the same.

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoAxe the last ent
Rene Scharfe [Mon, 21 Aug 2006 18:11:48 +0000 (20:11 +0200)]
Axe the last ent

In the name of Standardization, this cleanses the last usage string of
mystical creatures.  But they still dwell deep within the source and in
some debug messages, it is said.

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branch 'maint'
Junio C Hamano [Mon, 21 Aug 2006 21:16:38 +0000 (14:16 -0700)]
Merge branch 'maint'

* maint:
  builtin-mv: readability patch
  git-mv: fix off-by-one error
  git-mv: special case destination "."

18 years agobuiltin-mv: readability patch
Johannes Schindelin [Sat, 19 Aug 2006 14:52:21 +0000 (16:52 +0200)]
builtin-mv: readability patch

The old version was not liked at all. This is hopefully better. Oh, and it
gets rid of the goto.

Note that it does not change any functionality.

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-mv: fix off-by-one error
Johannes Schindelin [Mon, 21 Aug 2006 20:22:25 +0000 (22:22 +0200)]
git-mv: fix off-by-one error

Embarassing.

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-mv: special case destination "."
Johannes Schindelin [Fri, 18 Aug 2006 10:42:39 +0000 (12:42 +0200)]
git-mv: special case destination "."

Since the normalized basename of "." is "", the check for directory
failed erroneously.

Noticed by Fredrik Kuivinen.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agobuiltin-mv: readability patch
Johannes Schindelin [Sat, 19 Aug 2006 14:52:21 +0000 (16:52 +0200)]
builtin-mv: readability patch

The old version was not liked at all. This is hopefully better. Oh, and it
gets rid of the goto.

Note that it does not change any functionality.

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoIndentation fix.
Tilman Sauerbeck [Thu, 17 Aug 2006 18:44:16 +0000 (20:44 +0200)]
Indentation fix.

Signed-off-by: Tilman Sauerbeck <tilman@code-monkey.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoDo not use memcmp(sha1_1, sha1_2, 20) with hardcoded length.
David Rientjes [Thu, 17 Aug 2006 18:54:57 +0000 (11:54 -0700)]
Do not use memcmp(sha1_1, sha1_2, 20) with hardcoded length.

Introduces global inline:

hashcmp(const unsigned char *sha1, const unsigned char *sha2)

Uses memcmp for comparison and returns the result based on the length of
the hash name (a future runtime decision).

Acked-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitweb: Uniquify version info output, add meta generator in page header
Jakub Narebski [Thu, 17 Aug 2006 09:21:28 +0000 (11:21 +0200)]
gitweb: Uniquify version info output, add meta generator in page header

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branch 'jc/format-patch'
Junio C Hamano [Thu, 17 Aug 2006 02:27:03 +0000 (19:27 -0700)]
Merge branch 'jc/format-patch'

* jc/format-patch:
  Add a newline before appending "Signed-off-by: " line

18 years agoBe nicer if git executable is not installed
Ville Skyttä [Wed, 16 Aug 2006 20:12:26 +0000 (23:12 +0300)]
Be nicer if git executable is not installed

This patch avoids problems if vc-git.el is installed and activated, but
the git executable is not available, for example
http://list-archive.xemacs.org/xemacs-beta/200608/msg00062.html

Signed-off-by: Ville Skyttä <scop@xemacs.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branch 'jc/racy'
Junio C Hamano [Wed, 16 Aug 2006 21:00:34 +0000 (14:00 -0700)]
Merge branch 'jc/racy'

* jc/racy:
  Remove the "delay writing to avoid runtime penalty of racy-git avoidance"
  Add check program "git-check-racy"
  Documentation/technical/racy-git.txt
  avoid nanosleep(2)

18 years agoMerge branch 'maint'
Junio C Hamano [Wed, 16 Aug 2006 21:00:12 +0000 (14:00 -0700)]
Merge branch 'maint'

* maint:
  [PATCH] git-mv: add more path normalization

18 years agobuiltin-grep: remove unused debugging cruft.
Junio C Hamano [Wed, 16 Aug 2006 20:58:32 +0000 (13:58 -0700)]
builtin-grep: remove unused debugging cruft.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitweb: Add support for per project git URLs
Jakub Narebski [Wed, 16 Aug 2006 12:50:34 +0000 (14:50 +0200)]
gitweb: Add support for per project git URLs

It is now possible for project to have individual clone/fetch URLs.
They are provided in new file 'cloneurl' added below project's
$GIT_DIR directory.

If there is no cloneurl file, concatenation of git base URLs with
project name is used.

This is merge of Jakub Narebski and David Rientjes
  gitweb: Show project's git URL on summary page
with Aneesh Kumar
  gitweb: Add support for cloneurl.
  gitweb: Support multiple clone urls
patches.

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years ago[PATCH] git-mv: add more path normalization
Johannes Schindelin [Wed, 16 Aug 2006 08:44:02 +0000 (10:44 +0200)]
[PATCH] git-mv: add more path normalization

We already use the normalization from get_pathspec(), but now we also
remove a trailing slash. So,

git mv some_path/ into_some_path/

works now.

Also, move the "can not move directory into itself" test before the
subdirectory expansion.

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoRemove the "delay writing to avoid runtime penalty of racy-git avoidance"
Junio C Hamano [Wed, 16 Aug 2006 04:40:43 +0000 (21:40 -0700)]
Remove the "delay writing to avoid runtime penalty of racy-git avoidance"

The work-around should not be needed.  Even if it turns out we
would want it later, git will remember the patch for us ;-).

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitweb: consolidate action URL generation.
Martin Waitz [Tue, 15 Aug 2006 22:24:30 +0000 (00:24 +0200)]
gitweb: consolidate action URL generation.

Use the href() function instead of string concatenation to generate
most URLs to our own CGI.
This is a work in progress, not everything has been converted yet.

Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitweb: provide function to format the URL for an action link.
Martin Waitz [Tue, 15 Aug 2006 22:23:50 +0000 (00:23 +0200)]
gitweb: provide function to format the URL for an action link.

Provide a new function which can be used to generate an URL for the CGI.
This makes it possible to consolidate the URL generation in order to make
it easier to change the encoding of actions into URLs.

Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitweb: Show project's git URL on summary page
Jakub Narebski [Tue, 15 Aug 2006 21:03:17 +0000 (23:03 +0200)]
gitweb: Show project's git URL on summary page

From 31e4de9f22a3b17d4ad0ac800132e4e1a0a15006 Mon Sep 17 00:00:00 2001
From: David Rientjes <rientjes@google.com>
Date: Tue, 15 Aug 2006 11:43:04 -0700
Subject: [PATCH] gitweb: Show project's git URL on summary page

Add support for showing multiple clone/fetch git URLs for project on
a summary page. URL for project is created from base URL and project
name.

For example for XMMS2 project (xmms.se) the git base URL would be
git://git.xmms.se/xmms2.

With corrections from David Rientjes <rientjes@google.com>

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoAdd check program "git-check-racy"
Junio C Hamano [Wed, 16 Aug 2006 04:38:07 +0000 (21:38 -0700)]
Add check program "git-check-racy"

This will help counting the racily clean paths, but it should be
useless for daily use.  Do not even enable it in the makefile.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoDocumentation/technical/racy-git.txt
Junio C Hamano [Tue, 15 Aug 2006 20:09:49 +0000 (13:09 -0700)]
Documentation/technical/racy-git.txt

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoremove unnecessary initializations
David Rientjes [Tue, 15 Aug 2006 17:23:48 +0000 (10:23 -0700)]
remove unnecessary initializations

[jc: I needed to hand merge the changes to the updated codebase,
 so the result needs to be checked.]

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branch 'maint'
Junio C Hamano [Wed, 16 Aug 2006 04:15:32 +0000 (21:15 -0700)]
Merge branch 'maint'

* maint:
  finish_connect(): thinkofix
  git-mv: succeed even if source is a prefix of destination
  Solaris does not support C99 format strings before version 10

18 years agofinish_connect(): thinkofix
Junio C Hamano [Tue, 15 Aug 2006 23:28:08 +0000 (16:28 -0700)]
finish_connect(): thinkofix

All but one callers have ignore the return value from this
function, but the only caller, builtin-tar-tree.c::remote_tar(),
assumed it returns non-zero on failure and zero on success.  The
implementation however was returning either the waited pid
(which must be the same as its input) or -1 (an error).

Fix this thinko, while getting rid of an assignment of return
value from waitpid() into a variable of type int.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-mv: succeed even if source is a prefix of destination
Johannes Schindelin [Wed, 16 Aug 2006 00:20:32 +0000 (02:20 +0200)]
git-mv: succeed even if source is a prefix of destination

As noted by Fredrik Kuivinen, without this patch, git-mv fails on

git-mv README README-renamed

because "README" is a prefix of "README-renamed".

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agouse appropriate typedefs
David Rientjes [Tue, 15 Aug 2006 17:40:06 +0000 (10:40 -0700)]
use appropriate typedefs

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agomake inline is_null_sha1 global
David Rientjes [Tue, 15 Aug 2006 20:37:19 +0000 (13:37 -0700)]
make inline is_null_sha1 global

Replace sha1 comparisons to null_sha1 with a global inline (which previously an
unused static inline in builtin-apply.c)

[jc: with a fix from Jonas Fonseca.]

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoavoid nanosleep(2)
Junio C Hamano [Tue, 15 Aug 2006 10:39:47 +0000 (03:39 -0700)]
avoid nanosleep(2)

On Solaris nanosleep(2) is not available in libc; you need to
link with -lrt to get it.

The purpose of the loop is to wait until the next filesystem
timestamp granularity, and the code uses subsecond sleep in the
hope that it can shorten the delay to 0.5 seconds on average
instead of a full second.  It is probably not worth depending on
an extra library for this.

We might want to yank out the whole "racy-git avoidance is
costly later at runtime, so let's delay writing the index out"
codepath later, but that is a separate issue and needs some
testing on large trees to figure it out.  After playing with the
kernel tree, I have a feeling that the whole thing may not be
worth it.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-apply --binary: clean up and prepare for --reverse
Junio C Hamano [Tue, 15 Aug 2006 09:23:06 +0000 (02:23 -0700)]
git-apply --binary: clean up and prepare for --reverse

This cleans up the implementation of "git-apply --binary", and
implements reverse application of binary patches (when git-diff
is converted to emit reversible binary patches).

Earlier, the types of encoding (either deflated literal or
deflated delta) were stored in is_binary field in struct patch,
which meant that we cannot store more than one fragment that
differ in the encoding for a patch.  This moves the information
to a field in struct fragment that is otherwise unused for
binary patches, and makes it possible to hang two (or more, but
two is enough) hunks for a binary patch.

The original "binary patch" output from git-diff is internally
parsed into an "is_binary" patch with one fragment.  Upcoming
reversible binary patch output will have two fragments, the
first one being the forward patch and the second one the reverse
patch.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoFix detection of ipv6 on Solaris
Dennis Stosberg [Tue, 15 Aug 2006 09:01:27 +0000 (11:01 +0200)]
Fix detection of ipv6 on Solaris

The configuration script detects whether linking with -lsocket is
necessary but doesn't add -lsocket to LIBS.  This lets the ipv6 test
fail.

Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoLook for sockaddr_storage in sys/socket.h
Dennis Stosberg [Tue, 15 Aug 2006 09:01:25 +0000 (11:01 +0200)]
Look for sockaddr_storage in sys/socket.h

On Solaris and the BSDs the definition of "struct sockaddr_storage"
is not available from "netinet/in.h".  On Solaris "sys/socket.h" is
enough, at least OpenBSD needs "sys/types.h", too.

Using "sys/types.h" and "sys/socket.h" seems to be a more portable
way.

Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoSolaris has strlcpy() at least since version 8
Dennis Stosberg [Tue, 15 Aug 2006 09:01:20 +0000 (11:01 +0200)]
Solaris has strlcpy() at least since version 8

See http://docs.sun.com/app/docs/doc/816-3321/6m9k23sjk?a=view

Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoSolaris does not support C99 format strings before version 10
Dennis Stosberg [Tue, 15 Aug 2006 09:01:22 +0000 (11:01 +0200)]
Solaris does not support C99 format strings before version 10

Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogit-apply --reverse: simplify reverse option.
Junio C Hamano [Tue, 15 Aug 2006 06:26:51 +0000 (23:26 -0700)]
git-apply --reverse: simplify reverse option.

Having is_reverse in each patch did not make sense.  This will hopefully
simplify the work needed to introduce reversible binary diff format.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agot4116 apply --reverse test
Junio C Hamano [Tue, 15 Aug 2006 06:24:55 +0000 (23:24 -0700)]
t4116 apply --reverse test

The binary patch test needs to be made more careful not to have
the postimage blob in the repository in which the patch is applied

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMake sha1flush void and remove conditional return.
David Rientjes [Mon, 14 Aug 2006 20:32:01 +0000 (13:32 -0700)]
Make sha1flush void and remove conditional return.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMake upload_pack void and remove conditional return.
David Rientjes [Mon, 14 Aug 2006 20:40:51 +0000 (13:40 -0700)]
Make upload_pack void and remove conditional return.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMake track_tree_refs void.
David Rientjes [Mon, 14 Aug 2006 20:40:06 +0000 (13:40 -0700)]
Make track_tree_refs void.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMake pack_objects void.
David Rientjes [Mon, 14 Aug 2006 20:38:50 +0000 (13:38 -0700)]
Make pack_objects void.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMake fsck_dir void.
David Rientjes [Mon, 14 Aug 2006 20:36:18 +0000 (13:36 -0700)]
Make fsck_dir void.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMake checkout_all void.
David Rientjes [Mon, 14 Aug 2006 20:20:12 +0000 (13:20 -0700)]
Make checkout_all void.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMake show_entry void
David Rientjes [Mon, 14 Aug 2006 20:39:27 +0000 (13:39 -0700)]
Make show_entry void

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMake pprint_tag void and cleans up call in cmd_cat_file.
David Rientjes [Mon, 14 Aug 2006 20:19:15 +0000 (13:19 -0700)]
Make pprint_tag void and cleans up call in cmd_cat_file.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoRemove combine-diff.c::uninteresting()
Junio C Hamano [Tue, 15 Aug 2006 01:36:00 +0000 (18:36 -0700)]
Remove combine-diff.c::uninteresting()

A patch from David Rientjes made me realize we do not have to have
this function -- just call diff_unmodified_pair() directly.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoread-cache.c cleanup
David Rientjes [Mon, 14 Aug 2006 20:38:14 +0000 (13:38 -0700)]
read-cache.c cleanup

Removes conditional returns.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agohttp-push.c cleanup
David Rientjes [Mon, 14 Aug 2006 20:37:05 +0000 (13:37 -0700)]
http-push.c cleanup

Removes conditional return.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agodiff.c cleanup
David Rientjes [Mon, 14 Aug 2006 20:34:16 +0000 (13:34 -0700)]
diff.c cleanup

Removes conditional return.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agobuiltin-push.c cleanup
David Rientjes [Mon, 14 Aug 2006 20:26:58 +0000 (13:26 -0700)]
builtin-push.c cleanup

Removes conditional return in builtin-push.c

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agobuiltin-grep.c cleanup
David Rientjes [Mon, 14 Aug 2006 20:22:15 +0000 (13:22 -0700)]
builtin-grep.c cleanup

Removes conditional return.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoblame.c return cleanup
David Rientjes [Mon, 14 Aug 2006 20:18:11 +0000 (13:18 -0700)]
blame.c return cleanup

Removes conditional from return

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitweb: configurable home link string
Yasushi SHOJI [Mon, 14 Aug 2006 22:50:49 +0000 (07:50 +0900)]
gitweb: configurable home link string

I've always found difficult to figure out git URL for clone from
gitweb URL because git:// and http:// are different on many site
including kernel.org.

I've found this enhancement at http://dev.laptop.org/git when I was on
git channel, and thought that it'd be nice if all public gitweb site
show it's git URL on its page.

This patch allow us to change the home link string.  The current
default is "projects" as we all see on gitweb now.

ie. kernel.org might set this variable to "git://git.kernel.org/pub/scm/"

Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitweb: Separate printing difftree in git_commit into git_difftree_body
Jakub Narebski [Mon, 14 Aug 2006 00:18:33 +0000 (02:18 +0200)]
gitweb: Separate printing difftree in git_commit into git_difftree_body

Separate printing difftree in git_commit into separate
git_difftree_body subroutine. Add support for "C" (copied) status. For
"M" and "C" add parameter 'fp' (filename parent) to the "diff" link;
currently not supported by git_blobdiff ("blobdiff" action).

Reindented, realigned, added comments.

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitweb: True fix: Support for the standard mime.types map in gitweb
Jakub Narebski [Mon, 14 Aug 2006 00:16:33 +0000 (02:16 +0200)]
gitweb: True fix: Support for the standard mime.types map in gitweb

True fix for error in mimetype_guess, error introduced in original commit
2d00737489b8c61ed616b261c7c9bd314e2b0b41 and later fixed temporarily
by commenting out the line that caused error in commit
57bd4d3523efecf60197040cad34154aff4ddf80.

Gitweb now supports mime.types map $mimetypes_file relative to project.

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitweb: Skip comments in mime.types like file
Jakub Narebski [Mon, 14 Aug 2006 00:15:22 +0000 (02:15 +0200)]
gitweb: Skip comments in mime.types like file

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitweb: Change appereance of marker of refs pointing to given object
Jakub Narebski [Mon, 14 Aug 2006 00:14:20 +0000 (02:14 +0200)]
gitweb: Change appereance of marker of refs pointing to given object

Change git_get_references to include type of ref in the %refs value, which
means putting everything after 'refs/' as a ref name, not only last
part of the name.  Instead of separating refs pointing to the same
object by " / " separator, use anonymous array reference to store all
refs pointing to given object.

Use 'git-ls-remote .' if $projectroot/$project/info/refs does not
exist.  (Perhaps it should be used always.)

Refs are now in separate span elements.  Class is dependent on the ref
type: currently known classes are 'tag', 'head', 'remote', and 'ref'
(last one for HEAD and other refs in the main directory).  There is
encompassing span element of class refs, just in case of unknown ref
type.

This might be considered cleaner separating of git_get_references into
filling %refs hash only, and not taking part in formatting ref marker.

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitweb: Separate finding project owner into git_get_project_owner
Jakub Narebski [Mon, 14 Aug 2006 00:10:06 +0000 (02:10 +0200)]
gitweb: Separate finding project owner into git_get_project_owner

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitweb: Separate main part of git_history into git_history_body
Jakub Narebski [Mon, 14 Aug 2006 00:09:08 +0000 (02:09 +0200)]
gitweb: Separate main part of git_history into git_history_body

Separates main part of git_history into git_history_body subroutine,
and makes output more similar to git_shortlog.  Adds "diff to current"
link only for history of regular file (blob).

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitweb: Refactor printing shortened title in git_shortlog_body and git_tags_body
Jakub Narebski [Mon, 14 Aug 2006 00:08:27 +0000 (02:08 +0200)]
gitweb: Refactor printing shortened title in git_shortlog_body and git_tags_body

Separate printing of perhaps shortened title (subject) in
git_shortlog_body and git_tags_body into format_subject_html.

While at it, remove presentation element <b>...</b> used to format
title (subject) and move formatting to CSS.

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitweb: Separate ref parsing in git_get_refs_list into parse_ref
Jakub Narebski [Mon, 14 Aug 2006 00:07:00 +0000 (02:07 +0200)]
gitweb: Separate ref parsing in git_get_refs_list into parse_ref

Note that for each ref there are usually two calls to git subroutines:
first to get the type of ref, second to parse ref if ref is of commit
or tag type.

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agogitweb: Great subroutines renaming
Jakub Narebski [Mon, 14 Aug 2006 00:05:47 +0000 (02:05 +0200)]
gitweb: Great subroutines renaming

Rename some of subroutines to better reflect what they do.
Some renames were not performed because subroutine name
reflects hash key.

Subroutines name guideline:
* git_ prefix for subroutines related to git commands,
  git repository, or to gitweb actions
* git_get_ prefix for inner subroutines calling git command
  or reading some file in the repository and returning some output
* parse_ prefix for subroutines parsing some text (or reading and
  parsing some text) into hash or list
* format_ prefix for subroutines formatting, post-processing
  or generating some HTML/text fragment
* _get_ infix for subroutines which return result
* _print_ infix for subroutines which print fragment of output
* _body suffix for subroutines which outputs main part (body)
  of related action (usually table)
* _nav suffix for subroutines related to navigation bars
* _div suffix for subroutines returning or printing div element
* subroutine names should not be based on how the result is obtained,
  as this might change easily

Renames performed:
- git_get_referencing => format_ref_marker
- git_get_paging_nav => format_paging_nav
- git_read_head => git_get_head_hash
- git_read_hash => git_get_hash_by_ref
- git_read_description => git_get_project_description
- git_read_projects => git_get_projects_list
- read_info_ref => git_get_references
- git_read_refs => git_get_refs_list
- date_str => parse_date
- git_read_tag => parse_tag
- git_read_commit => parse_commit
- git_blob_plain_mimetype => blob_mimetype
- git_page_nav => git_print_page_nav
- git_header_div => git_print_header_div

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoAdd a newline before appending "Signed-off-by: " line
Franck Bui-Huu [Sun, 13 Aug 2006 18:30:27 +0000 (11:30 -0700)]
Add a newline before appending "Signed-off-by: " line

Whef the last line of the commit log message does not end with
"^[-A-Za-z]+: [^@]+@", append a newline after it to separate
the body of the commit log message from the run of sign-off and
ack lines. e.g. "Signed-off-by: A U Thor <au.thor@example.com>" or
"Acked-by: Me <myself@example.org>".

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branch 'maint'
Junio C Hamano [Mon, 14 Aug 2006 05:58:23 +0000 (22:58 -0700)]
Merge branch 'maint'

* maint:
  sample commit-msg hook: no silent exit on duplicate Signed-off-by lines
  Fix regex pattern in commit-msg

18 years agoFix type of combine-diff.c::show_patch_diff()
Junio C Hamano [Mon, 14 Aug 2006 02:19:34 +0000 (19:19 -0700)]
Fix type of combine-diff.c::show_patch_diff()

The other function, show_raw_diff() is void and no callers use
return value from neither.

Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agosample commit-msg hook: no silent exit on duplicate Signed-off-by lines
Luben Tuikov [Sun, 13 Aug 2006 08:41:22 +0000 (01:41 -0700)]
sample commit-msg hook: no silent exit on duplicate Signed-off-by lines

git-commit would silently exit if duplicate Signed-off-by
lines were found.  Users of git-commit would not know it,
unless they checked '$?'.  This patch makes git-commit
actually print out a message that nothing was commited
since duplicate Signed-off-lines were found.

Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoFix regex pattern in commit-msg
Luben Tuikov [Sun, 13 Aug 2006 07:34:37 +0000 (00:34 -0700)]
Fix regex pattern in commit-msg

Between the count and the line output, some
uniq(1) versions put a TAB character, not a space.
Make sure both are handled.

Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
18 years agoMerge branch 'jc/upload-pack'
Junio C Hamano [Sun, 13 Aug 2006 05:16:51 +0000 (22:16 -0700)]
Merge branch 'jc/upload-pack'

18 years agoMerge branch 'jc/racy-delay'
Junio C Hamano [Sun, 13 Aug 2006 02:41:44 +0000 (19:41 -0700)]
Merge branch 'jc/racy-delay'

18 years agoMerge branch 'th/diff-extra'
Junio C Hamano [Sun, 13 Aug 2006 02:34:41 +0000 (19:34 -0700)]
Merge branch 'th/diff-extra'

18 years agoMerge branch 'jc/pack-objects'
Junio C Hamano [Sun, 13 Aug 2006 02:33:16 +0000 (19:33 -0700)]
Merge branch 'jc/pack-objects'

18 years agoMerge branch 'js/read-tree'
Junio C Hamano [Sun, 13 Aug 2006 02:29:11 +0000 (19:29 -0700)]
Merge branch 'js/read-tree'

18 years agoMerge branch 'js/http-mb'
Junio C Hamano [Sun, 13 Aug 2006 02:24:51 +0000 (19:24 -0700)]
Merge branch 'js/http-mb'

18 years agoMerge branch 'js/color-diff'
Junio C Hamano [Sun, 13 Aug 2006 02:24:47 +0000 (19:24 -0700)]
Merge branch 'js/color-diff'

18 years agoMerge branch 'jn/web'
Junio C Hamano [Sun, 13 Aug 2006 02:24:15 +0000 (19:24 -0700)]
Merge branch 'jn/web'

18 years agoMerge branch 'lt/web'
Junio C Hamano [Sun, 13 Aug 2006 02:24:09 +0000 (19:24 -0700)]
Merge branch 'lt/web'

18 years agoMerge branch 'jn/conf'
Junio C Hamano [Sun, 13 Aug 2006 02:23:09 +0000 (19:23 -0700)]
Merge branch 'jn/conf'

18 years agoMerge branch 'jc/grep'
Junio C Hamano [Sun, 13 Aug 2006 02:16:33 +0000 (19:16 -0700)]
Merge branch 'jc/grep'