Documentation/git-gc.txt: add reference to githooks
This advertises the existence of the 'pre-auto-gc' hook and adds a cross
reference to where the hook is documented.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This advertises the existence of the 'pre-auto-gc' hook and adds a cross
reference to where the hook is documented.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 1.7.1.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/t9001: use egrep when regular expressions are involved
Supplying backslashed, extended regular expressions to grep is not
portable. Use egrep instead.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Supplying backslashed, extended regular expressions to grep is not
portable. Use egrep instead.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update draft release notes to 1.7.1.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'tr/send-email-8bit' into maint
* tr/send-email-8bit:
send-email: ask about and declare 8bit mails
* tr/send-email-8bit:
send-email: ask about and declare 8bit mails
Merge branch 'pb/maint-perl-errmsg-no-dir' into maint
* pb/maint-perl-errmsg-no-dir:
Git.pm: better error message
* pb/maint-perl-errmsg-no-dir:
Git.pm: better error message
Merge branch 'js/maint-am-rebase-invalid-author' into maint
* js/maint-am-rebase-invalid-author:
am: use get_author_ident_from_commit instead of mailinfo when rebasing
* js/maint-am-rebase-invalid-author:
am: use get_author_ident_from_commit instead of mailinfo when rebasing
Merge branch 'jc/maint-simpler-common-prefix' into maint
* jc/maint-simpler-common-prefix:
common_prefix: simplify and fix scanning for prefixes
* jc/maint-simpler-common-prefix:
common_prefix: simplify and fix scanning for prefixes
Merge branch 'bd/maint-unpack-trees-parawalk-fix' into maint
* bd/maint-unpack-trees-parawalk-fix:
unpack-trees: Make index lookahead less pessimal
* bd/maint-unpack-trees-parawalk-fix:
unpack-trees: Make index lookahead less pessimal
notes: Initialise variable to appease gcc
gcc version 3.4.4 thinks that the 'cmp' variable could be used
while uninitialised and complains thus:
notes.c: In function `write_each_non_note_until':
notes.c:719: warning: 'cmp' might be used uninitialized in \
this function
Note that gcc versions 4.1.2 and 4.4.0 do not issue this warning.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gcc version 3.4.4 thinks that the 'cmp' variable could be used
while uninitialised and complains thus:
notes.c: In function `write_each_non_note_until':
notes.c:719: warning: 'cmp' might be used uninitialized in \
this function
Note that gcc versions 4.1.2 and 4.4.0 do not issue this warning.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
notes: check number of parameters to "git notes copy"
Otherwise we may segfault with too few parameters.
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Bert Wesarg <Bert.Wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we may segfault with too few parameters.
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Bert Wesarg <Bert.Wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
msvc: Fix some compiler warnings
In particular, using the normal (or production) compiler
warning level (-W3), msvc complains as follows:
.../sha1.c(244) : warning C4018: '<' : signed/unsigned mismatch
.../sha1.c(270) : warning C4244: 'function' : conversion from \
'unsigned __int64' to 'unsigned long', possible loss of data
.../sha1.c(271) : warning C4244: 'function' : conversion from \
'unsigned __int64' to 'unsigned long', possible loss of data
Note that gcc issues a similar complaint about line 244 when
compiling with -Wextra.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, using the normal (or production) compiler
warning level (-W3), msvc complains as follows:
.../sha1.c(244) : warning C4018: '<' : signed/unsigned mismatch
.../sha1.c(270) : warning C4244: 'function' : conversion from \
'unsigned __int64' to 'unsigned long', possible loss of data
.../sha1.c(271) : warning C4244: 'function' : conversion from \
'unsigned __int64' to 'unsigned long', possible loss of data
Note that gcc issues a similar complaint about line 244 when
compiling with -Wextra.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: grep: fix asciidoc problem with --
Asciidoc interprets two dashes separated by spaces as a single big
dash. So let's escape the first dash, so that "\--" will properly
appear as "--".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc interprets two dashes separated by spaces as a single big
dash. So let's escape the first dash, so that "\--" will properly
appear as "--".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
msvc: Fix some "expr evaluates to function" compiler warnings
In particular, the following warning is issued while compiling
notes.c:
notes.c(927) : warning C4550: expression evaluates to a \
function which is missing an argument list
along with identical warnings on lines 928, 1016 and 1017.
In order to suppress the warning, we change the definition of
combine_notes_fn, so that the symbol type is an (explicit)
"pointer to function ...". As a result, several other
declarations need some minor fix-up to take account of the
new typedef.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, the following warning is issued while compiling
notes.c:
notes.c(927) : warning C4550: expression evaluates to a \
function which is missing an argument list
along with identical warnings on lines 928, 1016 and 1017.
In order to suppress the warning, we change the definition of
combine_notes_fn, so that the symbol type is an (explicit)
"pointer to function ...". As a result, several other
declarations need some minor fix-up to take account of the
new typedef.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update draft release notes to 1.7.1.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'ic/maint-rebase-i-abort' into maint
* ic/maint-rebase-i-abort:
rebase -i: Abort cleanly if new base cannot be checked out
* ic/maint-rebase-i-abort:
rebase -i: Abort cleanly if new base cannot be checked out
Merge branch 'cc/maint-commit-reflog-msg' into maint
* cc/maint-commit-reflog-msg:
commit: use value of GIT_REFLOG_ACTION env variable as reflog message
* cc/maint-commit-reflog-msg:
commit: use value of GIT_REFLOG_ACTION env variable as reflog message
Merge branch 'jk/maint-advice-empty-amend' into maint
* jk/maint-advice-empty-amend:
commit: give advice on empty amend
* jk/maint-advice-empty-amend:
commit: give advice on empty amend
Merge branch 'tc/commit-abbrev-fix' into maint
* tc/commit-abbrev-fix:
commit::print_summary(): don't use format_commit_message()
t7502-commit: add summary output tests for empty and merge commits
t7502-commit: add tests for summary output
* tc/commit-abbrev-fix:
commit::print_summary(): don't use format_commit_message()
t7502-commit: add summary output tests for empty and merge commits
t7502-commit: add tests for summary output
Merge branch 'jn/document-rebase-i-p-limitation' into maint
* jn/document-rebase-i-p-limitation:
rebase -i -p: document shortcomings
* jn/document-rebase-i-p-limitation:
rebase -i -p: document shortcomings
Merge branch 'jn/checkout-doc' into maint
* jn/checkout-doc:
Documentation/checkout: clarify description
Documentation/checkout: clarify description
* jn/checkout-doc:
Documentation/checkout: clarify description
Documentation/checkout: clarify description
Merge branch 'cc/maint-diff-CC-binary' into maint
* cc/maint-diff-CC-binary:
diff: fix "git show -C -C" output when renaming a binary file
Conflicts:
diff.c
* cc/maint-diff-CC-binary:
diff: fix "git show -C -C" output when renaming a binary file
Conflicts:
diff.c
Merge branch 'jc/t9129-any-utf8' into maint
* jc/t9129-any-utf8:
t9129: fix UTF-8 locale detection
* jc/t9129-any-utf8:
t9129: fix UTF-8 locale detection
Merge branch 'cb/ls-files-cdup' into maint
* cb/ls-files-cdup:
ls-files: allow relative pathspec
quote.c: separate quoting and relative path generation
* cb/ls-files-cdup:
ls-files: allow relative pathspec
quote.c: separate quoting and relative path generation
Merge branch 'tc/merge-m-log' into maint
* tc/merge-m-log:
merge: --log appends shortlog to message if specified
fmt-merge-msg: add function to append shortlog only
fmt-merge-msg: refactor merge title formatting
fmt-merge-msg: minor refactor of fmt_merge_msg()
merge: rename variable
merge: update comment
t7604-merge-custom-message: show that --log doesn't append to -m
t7604-merge-custom-message: shift expected output creation
* tc/merge-m-log:
merge: --log appends shortlog to message if specified
fmt-merge-msg: add function to append shortlog only
fmt-merge-msg: refactor merge title formatting
fmt-merge-msg: minor refactor of fmt_merge_msg()
merge: rename variable
merge: update comment
t7604-merge-custom-message: show that --log doesn't append to -m
t7604-merge-custom-message: shift expected output creation
Merge branch 'ph/clone-message-reword' into maint
* ph/clone-message-reword:
clone: reword messages to match the end-user perception
* ph/clone-message-reword:
clone: reword messages to match the end-user perception
Merge branch 'jn/maint-amend-missing-name' into maint
* jn/maint-amend-missing-name:
commit --amend: cope with missing display name
* jn/maint-amend-missing-name:
commit --amend: cope with missing display name
Merge branch 'pc/remove-warn' into maint
* pc/remove-warn:
Remove a redundant errno test in a usage of remove_path
Introduce remove_or_warn function
Implement the rmdir_or_warn function
Generalise the unlink_or_warn function
* pc/remove-warn:
Remove a redundant errno test in a usage of remove_path
Introduce remove_or_warn function
Implement the rmdir_or_warn function
Generalise the unlink_or_warn function
tests: remove unnecessary '^' from 'expr' regular expression
As Brandon noticed, a regular expression match given to 'expr' is already
anchored at the beginning. Some versions of expr even complain about this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As Brandon noticed, a regular expression match given to 'expr' is already
anchored at the beginning. Some versions of expr even complain about this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update draft release notes to 1.7.1.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'mc/maint-zoneparse' into maint
* mc/maint-zoneparse:
Add "Z" as an alias for the timezone "UTC"
* mc/maint-zoneparse:
Add "Z" as an alias for the timezone "UTC"
Merge branch 'jk/diff-m-doc' into maint
* jk/diff-m-doc:
docs: clarify meaning of -M for git-log
* jk/diff-m-doc:
docs: clarify meaning of -M for git-log
Merge branch 'jn/maint-doc-ignore' into maint
* jn/maint-doc-ignore:
gitignore.5: Clarify matching rules
* jn/maint-doc-ignore:
gitignore.5: Clarify matching rules
Merge branch 'bs/userdiff-php' into maint
* bs/userdiff-php:
diff: Support visibility modifiers in the PHP hunk header regexp
* bs/userdiff-php:
diff: Support visibility modifiers in the PHP hunk header regexp
Merge branch 'jk/maint-sha1-file-name-fix' into maint
* jk/maint-sha1-file-name-fix:
remove over-eager caching in sha1_file_name
* jk/maint-sha1-file-name-fix:
remove over-eager caching in sha1_file_name
Merge branch 'jk/maint-pull-dry-run-noop' into maint
* jk/maint-pull-dry-run-noop:
pull: do nothing on --dry-run
* jk/maint-pull-dry-run-noop:
pull: do nothing on --dry-run
Merge branch 'bw/diff-metainfo-color' into maint
* bw/diff-metainfo-color:
diff: fix coloring of extended diff headers
* bw/diff-metainfo-color:
diff: fix coloring of extended diff headers
Merge branch 'cb/assume-unchanged-fix' into maint
* cb/assume-unchanged-fix:
Documentation: git-add does not update files marked "assume unchanged"
do not overwrite files marked "assume unchanged"
* cb/assume-unchanged-fix:
Documentation: git-add does not update files marked "assume unchanged"
do not overwrite files marked "assume unchanged"
Merge branch 'jn/notes-doc' into maint
* jn/notes-doc:
Documentation/notes: nitpicks
Documentation/notes: clean up description of rewriting configuration
Documentation/notes: simplify treatment of default display refs
Documentation/log: add a CONFIGURATION section
Documentation/notes: simplify treatment of default notes ref
Documentation/notes: add configuration section
Documentation/notes: describe content of notes blobs
Documentation/notes: document format of notes trees
* jn/notes-doc:
Documentation/notes: nitpicks
Documentation/notes: clean up description of rewriting configuration
Documentation/notes: simplify treatment of default display refs
Documentation/log: add a CONFIGURATION section
Documentation/notes: simplify treatment of default notes ref
Documentation/notes: add configuration section
Documentation/notes: describe content of notes blobs
Documentation/notes: document format of notes trees
Merge branch 'ab/test-cleanup' into maint
* ab/test-cleanup:
Turn setup code in t2007-checkout-symlink.sh into a test
Move t6000lib.sh to lib-*
* ab/test-cleanup:
Turn setup code in t2007-checkout-symlink.sh into a test
Move t6000lib.sh to lib-*
Merge branch 'rs/diff-no-minimal' into maint
* rs/diff-no-minimal:
git diff too slow for a file
* rs/diff-no-minimal:
git diff too slow for a file
Merge branch 'bg/apply-blank-trailing-context' into maint
* bg/apply-blank-trailing-context:
apply: Allow blank *trailing* context lines to match beyond EOF
* bg/apply-blank-trailing-context:
apply: Allow blank *trailing* context lines to match beyond EOF
gitweb/Makefile: fix typo in gitweb.min.css rule
This typo has been in place since the rule was originally added by
0e6ce21 (Gitweb: add support for minifying gitweb.css).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This typo has been in place since the rule was originally added by
0e6ce21 (Gitweb: add support for minifying gitweb.css).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git.pm: better error message
Provide the bad directory name alongside with $!
Note: $! is set if there is "No such file or directory",
but isn't set if the file exists but is not a directory.
Signed-off-by: Philippe Bruhat (BooK) <book@cpan.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide the bad directory name alongside with $!
Note: $! is set if there is "No such file or directory",
but isn't set if the file exists but is not a directory.
Signed-off-by: Philippe Bruhat (BooK) <book@cpan.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: ask about and declare 8bit mails
git-send-email passes on an 8bit mail as-is even if it does not
declare a content-type. Because the user can edit email between
format-patch and send-email, such invalid mails are unfortunately not
very hard to come by.
Make git-send-email stop and ask about the encoding to use if it
encounters any such mail. Also provide a configuration setting to
permanently configure an encoding.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-send-email passes on an 8bit mail as-is even if it does not
declare a content-type. Because the user can edit email between
format-patch and send-email, such invalid mails are unfortunately not
very hard to come by.
Make git-send-email stop and ask about the encoding to use if it
encounters any such mail. Also provide a configuration setting to
permanently configure an encoding.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
unpack-trees: Make index lookahead less pessimal
When traversing trees with an index, the current index pointer
(o->cache_bottom) occasionally has to be temporarily advanced forwards to
match the traversal order of the tree, which is not the same as the sort
order of the index. The existing algorithm that did this (introduced in
730f72840cc50c523fe4cdd796ea2d2fc4571a28) would get "stuck" when the
cache_bottom was popped and then repeatedly check the same index entries
over and over. This represents a serious performance regression for
large repositories compared to the old "broken" traversal order.
This commit makes a simple change to mitigate this. Whenever
find_cache_pos sees that the current pos is also the cache_bottom, and
it has already been unpacked, it advances the cache_bottom as well as
the current pos. This prevents the above "sticking" behavior without
dramatically changing the algorithm.
In addition, this commit moves the unpacked check above the
ce_in_traverse_path() check. The simple bitmask check is cheaper, and
in the case described above will be firing quite a bit to advance the
cache_bottom after a tree pop.
This yields considerable performance improvements for large trees.
The following are the number of function calls for "git diff HEAD" on
the Linux kernel tree, with 33,307 files:
Symbol Calls Before Calls After
------------------- ------------ -----------
unpack_callback 35,332 35,332
find_cache_pos 37,357 37,357
ce_in_traverse_path 4,979,473 37,357
do_compare_entry 6,828,181 251,925
df_name_compare 6,828,181 251,925
And on a repository of 187,456 files:
Symbol Calls Before Calls After
------------------- ------------ -----------
unpack_callback 197,958 197,958
find_cache_pos 208,460 208,460
ce_in_traverse_path 37,308,336 208,460
do_compare_entry 156,950,469 2,690,626
df_name_compare 156,950,469 2,690,626
On the latter repository, user time for "git diff HEAD" was reduced from
5.58 to 0.42 seconds. This is compared to 0.30 seconds before the
traversal order fix was implemented.
Signed-off-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When traversing trees with an index, the current index pointer
(o->cache_bottom) occasionally has to be temporarily advanced forwards to
match the traversal order of the tree, which is not the same as the sort
order of the index. The existing algorithm that did this (introduced in
730f72840cc50c523fe4cdd796ea2d2fc4571a28) would get "stuck" when the
cache_bottom was popped and then repeatedly check the same index entries
over and over. This represents a serious performance regression for
large repositories compared to the old "broken" traversal order.
This commit makes a simple change to mitigate this. Whenever
find_cache_pos sees that the current pos is also the cache_bottom, and
it has already been unpacked, it advances the cache_bottom as well as
the current pos. This prevents the above "sticking" behavior without
dramatically changing the algorithm.
In addition, this commit moves the unpacked check above the
ce_in_traverse_path() check. The simple bitmask check is cheaper, and
in the case described above will be firing quite a bit to advance the
cache_bottom after a tree pop.
This yields considerable performance improvements for large trees.
The following are the number of function calls for "git diff HEAD" on
the Linux kernel tree, with 33,307 files:
Symbol Calls Before Calls After
------------------- ------------ -----------
unpack_callback 35,332 35,332
find_cache_pos 37,357 37,357
ce_in_traverse_path 4,979,473 37,357
do_compare_entry 6,828,181 251,925
df_name_compare 6,828,181 251,925
And on a repository of 187,456 files:
Symbol Calls Before Calls After
------------------- ------------ -----------
unpack_callback 197,958 197,958
find_cache_pos 208,460 208,460
ce_in_traverse_path 37,308,336 208,460
do_compare_entry 156,950,469 2,690,626
df_name_compare 156,950,469 2,690,626
On the latter repository, user time for "git diff HEAD" was reduced from
5.58 to 0.42 seconds. This is compared to 0.30 seconds before the
traversal order fix was implemented.
Signed-off-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare draft release notes to 1.7.1.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'cw/maint-exec-defpath' into maint
* cw/maint-exec-defpath:
autoconf: Check if <paths.h> exists and set HAVE_PATHS_H
exec_cmd.c: replace hard-coded path list with one from <paths.h>
* cw/maint-exec-defpath:
autoconf: Check if <paths.h> exists and set HAVE_PATHS_H
exec_cmd.c: replace hard-coded path list with one from <paths.h>
Merge branch 'sc/http-late-auth' into maint
* sc/http-late-auth:
Prompt for a username when an HTTP request 401s
* sc/http-late-auth:
Prompt for a username when an HTTP request 401s
Merge branch 'by/blame-doc-m-c' into maint
* by/blame-doc-m-c:
blame-options.txt: Add default value for `-M/-C` options.
* by/blame-doc-m-c:
blame-options.txt: Add default value for `-M/-C` options.
Merge branch 'cb/maint-stash-orphaned-file' into maint
* cb/maint-stash-orphaned-file:
stash tests: stash can lose data in a file removed from the index
stash: Don't overwrite files that have gone from the index
* cb/maint-stash-orphaned-file:
stash tests: stash can lose data in a file removed from the index
stash: Don't overwrite files that have gone from the index
Merge branch 'mg/advice-statushints' into maint
* mg/advice-statushints:
wt-status: take advice.statusHints seriously
t7508: test advice.statusHints
* mg/advice-statushints:
wt-status: take advice.statusHints seriously
t7508: test advice.statusHints
Merge branch 'jn/maint-bundle' into maint
* jn/maint-bundle:
fix "bundle --stdin" segfault
t5704 (bundle): add tests for bundle --stdin
* jn/maint-bundle:
fix "bundle --stdin" segfault
t5704 (bundle): add tests for bundle --stdin
Merge branch 'rr/doc-submitting' into maint
* rr/doc-submitting:
SubmittingPatches: Add new section about what to base work on
* rr/doc-submitting:
SubmittingPatches: Add new section about what to base work on
Merge branch 'jn/t7006-fixup' into maint
* jn/t7006-fixup:
t7006: guard cleanup with test_expect_success
* jn/t7006-fixup:
t7006: guard cleanup with test_expect_success
Merge branch 'jn/shortlog' into maint
* jn/shortlog:
pretty: Respect --abbrev option
shortlog: Document and test --format option
t4201 (shortlog): Test output format with multiple authors
t4201 (shortlog): guard setup with test_expect_success
Documentation/shortlog: scripted users should not rely on implicit HEAD
* jn/shortlog:
pretty: Respect --abbrev option
shortlog: Document and test --format option
t4201 (shortlog): Test output format with multiple authors
t4201 (shortlog): guard setup with test_expect_success
Documentation/shortlog: scripted users should not rely on implicit HEAD
Merge branch 'np/index-pack-memsave' into maint
* np/index-pack-memsave:
index-pack: smarter memory usage when appending objects
index-pack: rationalize unpack_entry_data()
index-pack: smarter memory usage when resolving deltas
* np/index-pack-memsave:
index-pack: smarter memory usage when appending objects
index-pack: rationalize unpack_entry_data()
index-pack: smarter memory usage when resolving deltas
Merge branch 'sp/maint-dumb-http-pack-reidx' into maint
* sp/maint-dumb-http-pack-reidx:
http.c::new_http_pack_request: do away with the temp variable filename
http-fetch: Use temporary files for pack-*.idx until verified
http-fetch: Use index-pack rather than verify-pack to check packs
Allow parse_pack_index on temporary files
Extract verify_pack_index for reuse from verify_pack
Introduce close_pack_index to permit replacement
http.c: Remove unnecessary strdup of sha1_to_hex result
http.c: Don't store destination name in request structures
http.c: Drop useless != NULL test in finish_http_pack_request
http.c: Tiny refactoring of finish_http_pack_request
t5550-http-fetch: Use subshell for repository operations
http.c: Remove bad free of static block
* sp/maint-dumb-http-pack-reidx:
http.c::new_http_pack_request: do away with the temp variable filename
http-fetch: Use temporary files for pack-*.idx until verified
http-fetch: Use index-pack rather than verify-pack to check packs
Allow parse_pack_index on temporary files
Extract verify_pack_index for reuse from verify_pack
Introduce close_pack_index to permit replacement
http.c: Remove unnecessary strdup of sha1_to_hex result
http.c: Don't store destination name in request structures
http.c: Drop useless != NULL test in finish_http_pack_request
http.c: Tiny refactoring of finish_http_pack_request
t5550-http-fetch: Use subshell for repository operations
http.c: Remove bad free of static block
Merge branch 'jc/am-3-show-corrupted-patch' into maint
* jc/am-3-show-corrupted-patch:
am -3: recover the diagnostic messages for corrupt patches
* jc/am-3-show-corrupted-patch:
am -3: recover the diagnostic messages for corrupt patches
Merge branch 'sp/maint-describe-tiebreak-with-tagger-date' into maint
* sp/maint-describe-tiebreak-with-tagger-date:
describe: Break annotated tag ties by tagger date
tag.c: Parse tagger date (if present)
tag.c: Refactor parse_tag_buffer to be saner to program
tag.h: Remove unused signature field
tag.c: Correct indentation
* sp/maint-describe-tiebreak-with-tagger-date:
describe: Break annotated tag ties by tagger date
tag.c: Parse tagger date (if present)
tag.c: Refactor parse_tag_buffer to be saner to program
tag.h: Remove unused signature field
tag.c: Correct indentation
Merge branch 'np/malloc-threading' into maint
* np/malloc-threading:
Thread-safe xmalloc and xrealloc needs a recursive mutex
Make xmalloc and xrealloc thread-safe
* np/malloc-threading:
Thread-safe xmalloc and xrealloc needs a recursive mutex
Make xmalloc and xrealloc thread-safe
Merge branch 'bg/send-email-smtpdomain' into maint
* bg/send-email-smtpdomain:
send-email: Cleanup smtp-domain and add config
Document send-email --smtp-domain
send-email: Don't use FQDNs without a '.'
send-email: Cleanup { style
* bg/send-email-smtpdomain:
send-email: Cleanup smtp-domain and add config
Document send-email --smtp-domain
send-email: Don't use FQDNs without a '.'
send-email: Cleanup { style
Merge branch 'rc/maint-curl-helper' into maint
* rc/maint-curl-helper:
remote-curl: ensure that URLs have a trailing slash
http: make end_url_with_slash() public
t5541-http-push: add test for URLs with trailing slash
Conflicts:
remote-curl.c
* rc/maint-curl-helper:
remote-curl: ensure that URLs have a trailing slash
http: make end_url_with_slash() public
t5541-http-push: add test for URLs with trailing slash
Conflicts:
remote-curl.c
Merge branch 'hg/maint-attr-fix' into maint
* hg/maint-attr-fix:
attr: Expand macros immediately when encountered.
attr: Allow multiple changes to an attribute on the same line.
attr: Fixed debug output for macro expansion.
* hg/maint-attr-fix:
attr: Expand macros immediately when encountered.
attr: Allow multiple changes to an attribute on the same line.
attr: Fixed debug output for macro expansion.
Merge branch 'mh/status-optionally-refresh' into maint
* mh/status-optionally-refresh:
t7508: add a test for "git status" in a read-only repository
git status: refresh the index if possible
t7508: add test for "git status" refreshing the index
* mh/status-optionally-refresh:
t7508: add a test for "git status" in a read-only repository
git status: refresh the index if possible
t7508: add test for "git status" refreshing the index
common_prefix: simplify and fix scanning for prefixes
common_prefix() scans backwards from the far end of each 'next'
pathspec, starting from 'len', shortening the 'prefix' using 'path' as
a reference.
However, there is a small opportunity for an out-of-bounds access
because len is unconditionally set to prefix-1 after a "direct match"
test failed. This means that if 'next' is shorter than prefix+2, we
read past it.
Instead of a minimal fix, simplify the loop: scan *forward* over the
'next' entry, remembering the last '/' where it matched the prefix
known so far. This is far easier to read and also has the advantage
that we only scan over each entry once.
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
common_prefix() scans backwards from the far end of each 'next'
pathspec, starting from 'len', shortening the 'prefix' using 'path' as
a reference.
However, there is a small opportunity for an out-of-bounds access
because len is unconditionally set to prefix-1 after a "direct match"
test failed. This means that if 'next' is shorter than prefix+2, we
read past it.
Instead of a minimal fix, simplify the loop: scan *forward* over the
'next' entry, remembering the last '/' where it matched the prefix
known so far. This is far easier to read and also has the advantage
that we only scan over each entry once.
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
am: use get_author_ident_from_commit instead of mailinfo when rebasing
In certain situations, commit authorship can consist of an invalid
e-mail address. For example, this is the case when working with git svn
repos where the author email has had the svn repo UUID appended such as:
author@example.com <author@example.com@deadbeef-dead-beef-dead-beefdeadbeef>
Given such an address, mailinfo extracts the authorship incorrectly as
it assumes a valid domain. However, when rebasing the original
authorship should be preserved irrespective of its validity as an email
address.
Using get_author_ident_from_commit instead of mailinfo when rebasing
preserves the original authorship.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In certain situations, commit authorship can consist of an invalid
e-mail address. For example, this is the case when working with git svn
repos where the author email has had the svn repo UUID appended such as:
author@example.com <author@example.com@deadbeef-dead-beef-dead-beefdeadbeef>
Given such an address, mailinfo extracts the authorship incorrectly as
it assumes a valid domain. However, when rebasing the original
authorship should be preserved irrespective of its validity as an email
address.
Using get_author_ident_from_commit instead of mailinfo when rebasing
preserves the original authorship.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
notes: Initialize variable to appease Sun Studio
Sun Studio 12 Update 1 thinks that *t could be uninitialized,
ostensibly because it doesn't take rewrite_cmd into account in its
static analysis.
builtin/notes.c: In function `notes_copy_from_stdin':
builtin/notes.c:419: warning: 't' might be used uninitialized in this function
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sun Studio 12 Update 1 thinks that *t could be uninitialized,
ostensibly because it doesn't take rewrite_cmd into account in its
static analysis.
builtin/notes.c: In function `notes_copy_from_stdin':
builtin/notes.c:419: warning: 't' might be used uninitialized in this function
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-mailinfo documentation: clarify -u/--encoding
Instead of talking about hardcoded UTF-8, describe i18n.commitencoding
and the --encoding option, and state that they default to UTF-8.
Signed-off-by: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of talking about hardcoded UTF-8, describe i18n.commitencoding
and the --encoding option, and state that they default to UTF-8.
Signed-off-by: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
add-interactive: Clarify “remaining hunks in the file”
The "a" and "d" commands to ‘add --patch’ (accept/reject rest of file)
interact with "j", "g", and "/" (skip some hunks) in a perhaps
confusing way: after accepting or rejecting all _later_ hunks in the
file, they return to the earlier, skipped hunks and prompt the user
about them again.
This behavior can be very useful in practice. One can still accept or
reject _all_ undecided hunks in a file by using the "g" command to
move to hunk #1 first.
Reported-by: Frédéric Brière <fbriere@fbriere.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "a" and "d" commands to ‘add --patch’ (accept/reject rest of file)
interact with "j", "g", and "/" (skip some hunks) in a perhaps
confusing way: after accepting or rejecting all _later_ hunks in the
file, they return to the earlier, skipped hunks and prompt the user
about them again.
This behavior can be very useful in practice. One can still accept or
reject _all_ undecided hunks in a file by using the "g" command to
move to hunk #1 first.
Reported-by: Frédéric Brière <fbriere@fbriere.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: use value of GIT_REFLOG_ACTION env variable as reflog message
The environment variable GIT_REFLOG_ACTION was used by git-commit.sh,
but when it was converted to a builtin
(f5bbc3225c4b073a7ff3218164a0c820299bc9c6, Port git commit to C,
Nov 8 2007) this was lost.
Let's use it again as it is more user friendly when reverting or
cherry-picking to see "revert" or "cherry-pick" in the reflog rather
than to just see "commit".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The environment variable GIT_REFLOG_ACTION was used by git-commit.sh,
but when it was converted to a builtin
(f5bbc3225c4b073a7ff3218164a0c820299bc9c6, Port git commit to C,
Nov 8 2007) this was lost.
Let's use it again as it is more user friendly when reverting or
cherry-picking to see "revert" or "cherry-pick" in the reflog rather
than to just see "commit".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit::print_summary(): don't use format_commit_message()
This attempts to fix a regression in git-commit, where non-abbreviated
SHA-1s were printed in the summary.
One possible fix would be to set ctx.abbrev to DEFAULT_ABBREV in the
`if` block, where format_commit_message() is used.
Instead, we do away with the format_commit_message() codeblock
altogether, replacing it with a re-run of log_tree_commit().
We re-run log_tree_commit() with rev.always_show_header set, to force
the invocation of show_log(). The effect of this flag can be seen from
this excerpt from log-tree.c:560, the only area that
rev.always_show_header is checked:
shown = log_tree_diff(opt, commit, &log);
if (!shown && opt->loginfo && opt->always_show_header) {
log.parent = NULL;
show_log(opt);
shown = 1;
}
We also set rev.use_terminator, so that a newline is appended at the end
of the log message. Note that callers in builtin/log.c that also set
rev.always_show_header don't have to set rev.use_terminator, but still
get a newline, because they are wrapped in a pager.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This attempts to fix a regression in git-commit, where non-abbreviated
SHA-1s were printed in the summary.
One possible fix would be to set ctx.abbrev to DEFAULT_ABBREV in the
`if` block, where format_commit_message() is used.
Instead, we do away with the format_commit_message() codeblock
altogether, replacing it with a re-run of log_tree_commit().
We re-run log_tree_commit() with rev.always_show_header set, to force
the invocation of show_log(). The effect of this flag can be seen from
this excerpt from log-tree.c:560, the only area that
rev.always_show_header is checked:
shown = log_tree_diff(opt, commit, &log);
if (!shown && opt->loginfo && opt->always_show_header) {
log.parent = NULL;
show_log(opt);
shown = 1;
}
We also set rev.use_terminator, so that a newline is appended at the end
of the log message. Note that callers in builtin/log.c that also set
rev.always_show_header don't have to set rev.use_terminator, but still
get a newline, because they are wrapped in a pager.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/README: document --root option
We've had this option since f423ef5 (tests: allow user to specify
trash directory location, 2009-08-09). Make it easier to look up :-)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've had this option since f423ef5 (tests: allow user to specify
trash directory location, 2009-08-09). Make it easier to look up :-)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: default pager on AIX to "more"
AIX doesn't ship with "less" by default, and their "more" is
more featureful than average, so the latter is a more
sensible choice. People who really want less can set the
compile-time option themselves, or users can set $PAGER.
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Tor Arntsen <tor@spacetec.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
AIX doesn't ship with "less" by default, and their "more" is
more featureful than average, so the latter is a more
sensible choice. People who really want less can set the
compile-time option themselves, or users can set $PAGER.
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Tor Arntsen <tor@spacetec.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase -i: Abort cleanly if new base cannot be checked out
Untracked content in the working tree may prevent rebase -i from checking out
the new base onto which it wants to replay commits, if the new base commit
includes files at those (now untracked) paths. Currently, rebase -i dies
uncleanly in this situation, updating ORIG_HEAD and leaving a useless
.git/rebase-merge directory, with which the user can do nothing useful except
rebase --abort. Make rebase -i abort the procedure itself instead, as
non-interactive rebase already does, and add a test for this behavior.
Signed-off-by: Ian Ward Comfort <icomfort@stanford.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Untracked content in the working tree may prevent rebase -i from checking out
the new base onto which it wants to replay commits, if the new base commit
includes files at those (now untracked) paths. Currently, rebase -i dies
uncleanly in this situation, updating ORIG_HEAD and leaving a useless
.git/rebase-merge directory, with which the user can do nothing useful except
rebase --abort. Make rebase -i abort the procedure itself instead, as
non-interactive rebase already does, and add a test for this behavior.
Signed-off-by: Ian Ward Comfort <icomfort@stanford.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: give advice on empty amend
We generally disallow empty commits with "git commit". The
output produced by the wt_status functions is generally
sufficient to explain what happened.
With --amend commits, however, things are a little more
confusing. We would create an empty commit not if you
actually have staged changes _now_, but if your staged
changes match HEAD^. In this case, it is not immediately
obvious why "git commit" claims no changes, but "git status"
does not. Furthermore, we should point the user in the
direction of git reset, which would eliminate the empty
commit entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally disallow empty commits with "git commit". The
output produced by the wt_status functions is generally
sufficient to explain what happened.
With --amend commits, however, things are a little more
confusing. We would create an empty commit not if you
actually have staged changes _now_, but if your staged
changes match HEAD^. In this case, it is not immediately
obvious why "git commit" claims no changes, but "git status"
does not. Furthermore, we should point the user in the
direction of git reset, which would eliminate the empty
commit entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/checkout: clarify description
git checkout can be used to switch branches and to retrieve files from
the index or an arbitrary tree. Split the description into
subsections corresponding to each mode to make each use easier to
understand.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git checkout can be used to switch branches and to retrieve files from
the index or an arbitrary tree. Split the description into
subsections corresponding to each mode to make each use easier to
understand.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase -i -p: document shortcomings
The rebase --preserve-merges facility presents a list of commits
in its instruction sheet and uses a separate table to keep
track of their parents. Unfortunately, in practice this means
that with -p after most attempts to rearrange patches, some
commits have the "wrong" parent and the resulting history is
rarely what the caller expected.
Yes, it would be nice to fix that. But first, add a warning to the
manual to help the uninitiated understand what is going on.
Reported-by: Jiří Paleček <jpalecek@web.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rebase --preserve-merges facility presents a list of commits
in its instruction sheet and uses a separate table to keep
track of their parents. Unfortunately, in practice this means
that with -p after most attempts to rearrange patches, some
commits have the "wrong" parent and the resulting history is
rarely what the caller expected.
Yes, it would be nice to fix that. But first, add a warning to the
manual to help the uninitiated understand what is going on.
Reported-by: Jiří Paleček <jpalecek@web.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change C99 comments to old-style C comments
Signed-off-by: Tor Arntsen <tor@spacetec.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Tor Arntsen <tor@spacetec.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit.txt: clarify how --author argument is used
commit --author was added by 146ea06 (git commit --author=$name: look $name up
in existing commits), but its documentation was sorely lacking compared to its
excellent commit message. This commit tries to improve the documentation.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit --author was added by 146ea06 (git commit --author=$name: look $name up
in existing commits), but its documentation was sorely lacking compared to its
excellent commit message. This commit tries to improve the documentation.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff: fix "git show -C -C" output when renaming a binary file
A bug was introduced in 3e97c7c6af2901cec63bf35fcd43ae3472e24af8
(No diff -b/-w output for all-whitespace changes, Nov 19 2009)
that made the lines:
diff --git a/bar b/sub/bar
similarity index 100%
rename from bar
rename to sub/bar
disappear from "git show -C -C" output when file bar is a binary
file.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bug was introduced in 3e97c7c6af2901cec63bf35fcd43ae3472e24af8
(No diff -b/-w output for all-whitespace changes, Nov 19 2009)
that made the lines:
diff --git a/bar b/sub/bar
similarity index 100%
rename from bar
rename to sub/bar
disappear from "git show -C -C" output when file bar is a binary
file.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-files: allow relative pathspec
git ls-files used to error out if given paths which point outside the current
working directory, such as '../'. We now allow such paths and the output is
analogous to git grep -l.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git ls-files used to error out if given paths which point outside the current
working directory, such as '../'. We now allow such paths and the output is
analogous to git grep -l.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
quote.c: separate quoting and relative path generation
This is in preparation of relative path support for ls-files, which
quotes a path only if the line terminator is not the NUL character.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation of relative path support for ls-files, which
quotes a path only if the line terminator is not the NUL character.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup: document prefix
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9129: fix UTF-8 locale detection
The UTF-8 prerequisite test checked explicitly for en_US.utf8 in the
output from "locale -a", but the tests that are actually protected by the
prerequisite were asking LC_ALL=en_US.UTF-8 from the system.
This inconsistency leads the tests to fail on platforms that do not know
both en_US.UTF-8 and en_US.utf8 (thanks you, Yann Droneaud, for bringing
this up with an initial patch).
Instead, pick a locale with ".UTF-8" (with or without hyphen, spelled in
either upper or lowercase) in its name from "locale -a" output, and use it
for running the test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The UTF-8 prerequisite test checked explicitly for en_US.utf8 in the
output from "locale -a", but the tests that are actually protected by the
prerequisite were asking LC_ALL=en_US.UTF-8 from the system.
This inconsistency leads the tests to fail on platforms that do not know
both en_US.UTF-8 and en_US.utf8 (thanks you, Yann Droneaud, for bringing
this up with an initial patch).
Instead, pick a locale with ".UTF-8" (with or without hyphen, spelled in
either upper or lowercase) in its name from "locale -a" output, and use it
for running the test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-compat-util.h: use apparently more common __sgi macro to detect SGI IRIX
IRIX 6.5.26m does not define the 'sgi' macro, but it does define an '__sgi'
macro. Since later IRIX versions (6.5.29m) define both macros, and since
an underscore prefixed macro is preferred anyway, use '__sgi' to detect
compilation on SGI IRIX.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
IRIX 6.5.26m does not define the 'sgi' macro, but it does define an '__sgi'
macro. Since later IRIX versions (6.5.29m) define both macros, and since
an underscore prefixed macro is preferred anyway, use '__sgi' to detect
compilation on SGI IRIX.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: A...B shortcut for checkout and rebase
Describe the A...B shortcuts for checkout and rebase [-i] which were
introduced in these commits:
619a64e ("checkout A...B" switches to the merge base between A and B, 2009-10-18)
61dfa1b ("rebase --onto A...B" replays history on the merge base between A and B, 2009-11-20)
230a456 (rebase -i: teach --onto A...B syntax, 2010-01-07)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe the A...B shortcuts for checkout and rebase [-i] which were
introduced in these commits:
619a64e ("checkout A...B" switches to the merge base between A and B, 2009-10-18)
61dfa1b ("rebase --onto A...B" replays history on the merge base between A and B, 2009-11-20)
230a456 (rebase -i: teach --onto A...B syntax, 2010-01-07)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/pretty-{formats,options}: better reference for "format:<string>"
In "git help log" (and friends) it's not easy to find the possible
placeholder for <string> for the "--pretty=format:<string>" option
to git log.
This patch makes the placeholder easier to find by adding a reference
to the "PRETTY FORMATS" section and repeating the "format:<string>"
phrase.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In "git help log" (and friends) it's not easy to find the possible
placeholder for <string> for the "--pretty=format:<string>" option
to git log.
This patch makes the placeholder easier to find by adding a reference
to the "PRETTY FORMATS" section and repeating the "format:<string>"
phrase.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint-1.7.0' into maint
* maint-1.7.0:
Documentation/config: describe status.submodulesummary
* maint-1.7.0:
Documentation/config: describe status.submodulesummary
gitignore.5: Clarify matching rules
Patterns containing a / are implicitly anchored to the directory
containing the relevant .gitignore file.
Patterns not containing a / are textual matches against the path
name relative to the directory containing .gitignore.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patterns containing a / are implicitly anchored to the directory
containing the relevant .gitignore file.
Patterns not containing a / are textual matches against the path
name relative to the directory containing .gitignore.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/SubmittingPatches: Fix typo in GMail section
Commit e498257d introduced a typo while improving the GMail section
of SubmittingPatches.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Acked-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e498257d introduced a typo while improving the GMail section
of SubmittingPatches.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Acked-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/checkout: clarify description
To the first-time reader, it may not be obvious that ‘git checkout’
has two modes, nor that if no branch is specified it will read
from the index.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To the first-time reader, it may not be obvious that ‘git checkout’
has two modes, nor that if no branch is specified it will read
from the index.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/config: describe status.submodulesummary
ac8d5af (builtin-status: submodule summary support, 2008-04-12)
intoduced this variable and described it in git-status[1].
Include this description in git-config[1], as well.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ac8d5af (builtin-status: submodule summary support, 2008-04-12)
intoduced this variable and described it in git-status[1].
Include this description in git-config[1], as well.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint-1.7.0' into maint
* maint-1.7.0:
Makefile: reenable install with NO_CURL
* maint-1.7.0:
Makefile: reenable install with NO_CURL
Makefile: reenable install with NO_CURL
Setting NO_CURL leaves some variables like REMOTE_CURL_ALIASES
empty, which creates no fun when for-looping over
$(REMOTE_CURL_ALIASES) unconditionally. Make it conditional.
Reported-by: Paul Walker <PWalker752@aol.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Setting NO_CURL leaves some variables like REMOTE_CURL_ALIASES
empty, which creates no fun when for-looping over
$(REMOTE_CURL_ALIASES) unconditionally. Make it conditional.
Reported-by: Paul Walker <PWalker752@aol.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7502-commit: add summary output tests for empty and merge commits
After c197702 (pretty: Respect --abbrev option), non-abbreviated hashes
began to appear, leading to failures for these tests.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After c197702 (pretty: Respect --abbrev option), non-abbreviated hashes
began to appear, leading to failures for these tests.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7502-commit: add tests for summary output
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: --set-upstream option for git-branch
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_cwd_relative(): do not misinterpret suffix as subdirectory
If the current working directory is the same as the work tree path
plus a suffix, e.g. 'work' and 'work-xyz', then the suffix '-xyz'
would be interpreted as a subdirectory of 'work'.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the current working directory is the same as the work tree path
plus a suffix, e.g. 'work' and 'work-xyz', then the suffix '-xyz'
would be interpreted as a subdirectory of 'work'.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff: Support visibility modifiers in the PHP hunk header regexp
Starting with PHP5, class methods can have a visibility modifier, which
caused the methods not to be matched by the existing regexp, so extend
the regexp to match those modifiers. And while we're at it, allow the
"static" modifier as well.
Since the "static" modifier can appear either before or after the
visibility modifier, let's just allow any number of modifiers to appear
in any order, as that simplifies the regexp and shouldn't cause any
false positives.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting with PHP5, class methods can have a visibility modifier, which
caused the methods not to be matched by the existing regexp, so extend
the regexp to match those modifiers. And while we're at it, allow the
"static" modifier as well.
Since the "static" modifier can appear either before or after the
visibility modifier, let's just allow any number of modifiers to appear
in any order, as that simplifies the regexp and shouldn't cause any
false positives.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>