Merge branch 'jc/fmt-patch' into next
* jc/fmt-patch:
Tentative built-in format-patch.
* jc/fmt-patch:
Tentative built-in format-patch.
Tentative built-in format-patch.
This only does --stdout right now. To write into separate files
with pretty-printed filenames like the real thing does, it needs
a bit mroe work.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This only does --stdout right now. To write into separate files
with pretty-printed filenames like the real thing does, it needs
a bit mroe work.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'sh/daemon' into next
* sh/daemon:
socksetup: don't return on set_reuse_addr() error
* sh/daemon:
socksetup: don't return on set_reuse_addr() error
socksetup: don't return on set_reuse_addr() error
The set_reuse_addr() error case was the only error case in
socklist() where we returned rather than continued. Not sure
why. Either we must free the socklist, or continue. This patch
continues on error.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The set_reuse_addr() error case was the only error case in
socklist() where we returned rather than continued. Not sure
why. Either we must free the socklist, or continue. This patch
continues on error.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'jc/pager-cat'
* jc/pager-cat:
Do not fork PAGER=cat
* jc/pager-cat:
Do not fork PAGER=cat
Merge branch 'lt/logopt'
* lt/logopt:
Fix "git log --stat": make sure to set recursive with --stat.
combine-diff: show diffstat with the first parent.
git.c: LOGSIZE is unused after log printing cleanup.
Log message printout cleanups (#3): fix --pretty=oneline
Log message printout cleanups (#2)
Log message printout cleanups
rev-list --header: output format fix
Fixes for option parsing
log/whatchanged/show - log formatting cleanup.
Simplify common default options setup for built-in log family.
Tentative built-in "git show"
Built-in git-whatchanged.
rev-list option parser fix.
Split init_revisions() out of setup_revisions()
Fix up rev-list option parsing.
Fix up default abbrev in setup_revisions() argument parser.
Common option parsing for "git log --diff" and friends
* lt/logopt:
Fix "git log --stat": make sure to set recursive with --stat.
combine-diff: show diffstat with the first parent.
git.c: LOGSIZE is unused after log printing cleanup.
Log message printout cleanups (#3): fix --pretty=oneline
Log message printout cleanups (#2)
Log message printout cleanups
rev-list --header: output format fix
Fixes for option parsing
log/whatchanged/show - log formatting cleanup.
Simplify common default options setup for built-in log family.
Tentative built-in "git show"
Built-in git-whatchanged.
rev-list option parser fix.
Split init_revisions() out of setup_revisions()
Fix up rev-list option parsing.
Fix up default abbrev in setup_revisions() argument parser.
Common option parsing for "git log --diff" and friends
Merge branch 'master' into next
* master:
GIT 1.3.0
Add git-annotate(1) and git-blame(1)
diff --stat: make sure to set recursive.
git-svnimport symlink support
* master:
GIT 1.3.0
Add git-annotate(1) and git-blame(1)
diff --stat: make sure to set recursive.
git-svnimport symlink support
Merge branch 'lt/logopt' into next
* lt/logopt:
Fix "git log --stat": make sure to set recursive with --stat.
* lt/logopt:
Fix "git log --stat": make sure to set recursive with --stat.
GIT 1.3.0
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add git-annotate(1) and git-blame(1)
[jc: with entries in git.txt]
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: with entries in git.txt]
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix "git log --stat": make sure to set recursive with --stat.
Just like "patch" format always needs recursive, "diffstat"
format does not make sense without setting recursive.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just like "patch" format always needs recursive, "diffstat"
format does not make sense without setting recursive.
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff --stat: make sure to set recursive.
Just like "patch" format always needs recursive, "diffstat"
format does not make sense without setting recursive.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just like "patch" format always needs recursive, "diffstat"
format does not make sense without setting recursive.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svnimport symlink support
added svn:special symlink support for access methods other than
direct-http
Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org>
Acked-by: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
added svn:special symlink support for access methods other than
direct-http
Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org>
Acked-by: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'lt/logopt' into next
* lt/logopt:
combine-diff: show diffstat with the first parent.
git.c: LOGSIZE is unused after log printing cleanup.
Log message printout cleanups (#3): fix --pretty=oneline
Log message printout cleanups (#2)
Log message printout cleanups
rev-list --header: output format fix
* lt/logopt:
combine-diff: show diffstat with the first parent.
git.c: LOGSIZE is unused after log printing cleanup.
Log message printout cleanups (#3): fix --pretty=oneline
Log message printout cleanups (#2)
Log message printout cleanups
rev-list --header: output format fix
Merge branch 'master' into next
* master:
packed_object_info_detail(): check for corrupt packfile.
cleanups: remove unused variable from exec_cmd.c
cleanups: prevent leak of two strduped strings in config.c
cleanups: Remove impossible case in quote.c
cleanups: Remove unused vars from combine-diff.c
cleanups: Fix potential bugs in connect.c
Allow empty lines in info/grafts
* master:
packed_object_info_detail(): check for corrupt packfile.
cleanups: remove unused variable from exec_cmd.c
cleanups: prevent leak of two strduped strings in config.c
cleanups: Remove impossible case in quote.c
cleanups: Remove unused vars from combine-diff.c
cleanups: Fix potential bugs in connect.c
Allow empty lines in info/grafts
combine-diff: show diffstat with the first parent.
Asking for stat (either with --stat or --patch-with-stat) gives
you diffstat for the first parent, even under combine-diff.
While the combined patch is useful to highlight the complexity
and interaction of the parts touched by all branches when
reviewing a merge commit, diffstat is a tool to assess the
extent of damage the merge brings in, and showing stat with the
first parent is more sensible than clever per-parent diffstat.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Asking for stat (either with --stat or --patch-with-stat) gives
you diffstat for the first parent, even under combine-diff.
While the combined patch is useful to highlight the complexity
and interaction of the parts touched by all branches when
reviewing a merge commit, diffstat is a tool to assess the
extent of damage the merge brings in, and showing stat with the
first parent is more sensible than clever per-parent diffstat.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git.c: LOGSIZE is unused after log printing cleanup.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Log message printout cleanups (#3): fix --pretty=oneline
This option is very special, since pretty_print_commit() will _remove_
the newline at the end of it, so we want to have an extra separator
between the things.
I added a honking big comment this time, so that (a) I don't forget this
_again_ (I broke "oneline" several times during this printout cleanup),
and so that people can understand _why_ the code does what it does.
Now, arguably the alternate fix is to always have the '\n' at the end in
pretty-print-commit, but git-rev-list depends on the current behaviour
(but we could have git-rev-list remove it, whatever).
With the big comment, the code hopefully doesn't get broken again. And now
things like
git log --pretty=oneline --cc --patch-with-stat
works (even if that is admittedly a totally insane combination: if you
want the patch, having the "oneline" log format is just crazy, but hey,
it _works_. Even insane people are people).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This option is very special, since pretty_print_commit() will _remove_
the newline at the end of it, so we want to have an extra separator
between the things.
I added a honking big comment this time, so that (a) I don't forget this
_again_ (I broke "oneline" several times during this printout cleanup),
and so that people can understand _why_ the code does what it does.
Now, arguably the alternate fix is to always have the '\n' at the end in
pretty-print-commit, but git-rev-list depends on the current behaviour
(but we could have git-rev-list remove it, whatever).
With the big comment, the code hopefully doesn't get broken again. And now
things like
git log --pretty=oneline --cc --patch-with-stat
works (even if that is admittedly a totally insane combination: if you
want the patch, having the "oneline" log format is just crazy, but hey,
it _works_. Even insane people are people).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Log message printout cleanups (#2)
Here's a further patch on top of the previous one with cosmetic
improvements (no "real" code changes, just trivial updates):
- it gets the "---" before a diffstat right, including for the combined
merge case. Righ now the logic is that we always use "---" when we have
a diffstat, and an empty line otherwise. That's how I visually prefer
it, but hey, it can be tweaked later.
- I made "diff --cc/combined" add the "---/+++" header lines too. The
thing won't be mistaken for a valid diff, since the "@@" lines have too
many "@" characters (three or more), but it just makes it visually
match a real diff, which at least to me makes a big difference in
readability. Without them, it just looks very "wrong".
I guess I should have taken the filename from each individual entry
(and had one "---" file per parent), but I didn't even bother to try to
see how that works, so this was the simple thing.
With this, doing a
git log --cc --patch-with-stat
looks quite readable, I think. The only nagging issue - as far as I'm
concerned - is that diffstats for merges are pretty questionable the way
they are done now. I suspect it would be better to just have the _first_
diffstat, and always make the merge diffstat be the one for "result
against first parent".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Here's a further patch on top of the previous one with cosmetic
improvements (no "real" code changes, just trivial updates):
- it gets the "---" before a diffstat right, including for the combined
merge case. Righ now the logic is that we always use "---" when we have
a diffstat, and an empty line otherwise. That's how I visually prefer
it, but hey, it can be tweaked later.
- I made "diff --cc/combined" add the "---/+++" header lines too. The
thing won't be mistaken for a valid diff, since the "@@" lines have too
many "@" characters (three or more), but it just makes it visually
match a real diff, which at least to me makes a big difference in
readability. Without them, it just looks very "wrong".
I guess I should have taken the filename from each individual entry
(and had one "---" file per parent), but I didn't even bother to try to
see how that works, so this was the simple thing.
With this, doing a
git log --cc --patch-with-stat
looks quite readable, I think. The only nagging issue - as far as I'm
concerned - is that diffstats for merges are pretty questionable the way
they are done now. I suspect it would be better to just have the _first_
diffstat, and always make the merge diffstat be the one for "result
against first parent".
Signed-off-by: Junio C Hamano <junkio@cox.net>
packed_object_info_detail(): check for corrupt packfile.
Serge E. Hallyn noticed that we compute how many input bytes are
still left, but did not use it for sanity checking.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Serge E. Hallyn noticed that we compute how many input bytes are
still left, but did not use it for sanity checking.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Log message printout cleanups
On Sun, 16 Apr 2006, Junio C Hamano wrote:
>
> In the mid-term, I am hoping we can drop the generate_header()
> callchain _and_ the custom code that formats commit log in-core,
> found in cmd_log_wc().
Ok, this was nastier than expected, just because the dependencies between
the different log-printing stuff were absolutely _everywhere_, but here's
a patch that does exactly that.
The patch is not very easy to read, and the "--patch-with-stat" thing is
still broken (it does not call the "show_log()" thing properly for
merges). That's not a new bug. In the new world order it _should_ do
something like
if (rev->logopt)
show_log(rev, rev->logopt, "---\n");
but it doesn't. I haven't looked at the --with-stat logic, so I left it
alone.
That said, this patch removes more lines than it adds, and in particular,
the "cmd_log_wc()" loop is now a very clean:
while ((commit = get_revision(rev)) != NULL) {
log_tree_commit(rev, commit);
free(commit->buffer);
commit->buffer = NULL;
}
so it doesn't get much prettier than this. All the complexity is entirely
hidden in log-tree.c, and any code that needs to flush the log literally
just needs to do the "if (rev->logopt) show_log(...)" incantation.
I had to make the combined_diff() logic take a "struct rev_info" instead
of just a "struct diff_options", but that part is pretty clean.
This does change "git whatchanged" from using "diff-tree" as the commit
descriptor to "commit", and I changed one of the tests to reflect that new
reality. Otherwise everything still passes, and my other tests look fine
too.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On Sun, 16 Apr 2006, Junio C Hamano wrote:
>
> In the mid-term, I am hoping we can drop the generate_header()
> callchain _and_ the custom code that formats commit log in-core,
> found in cmd_log_wc().
Ok, this was nastier than expected, just because the dependencies between
the different log-printing stuff were absolutely _everywhere_, but here's
a patch that does exactly that.
The patch is not very easy to read, and the "--patch-with-stat" thing is
still broken (it does not call the "show_log()" thing properly for
merges). That's not a new bug. In the new world order it _should_ do
something like
if (rev->logopt)
show_log(rev, rev->logopt, "---\n");
but it doesn't. I haven't looked at the --with-stat logic, so I left it
alone.
That said, this patch removes more lines than it adds, and in particular,
the "cmd_log_wc()" loop is now a very clean:
while ((commit = get_revision(rev)) != NULL) {
log_tree_commit(rev, commit);
free(commit->buffer);
commit->buffer = NULL;
}
so it doesn't get much prettier than this. All the complexity is entirely
hidden in log-tree.c, and any code that needs to flush the log literally
just needs to do the "if (rev->logopt) show_log(...)" incantation.
I had to make the combined_diff() logic take a "struct rev_info" instead
of just a "struct diff_options", but that part is pretty clean.
This does change "git whatchanged" from using "diff-tree" as the commit
descriptor to "commit", and I changed one of the tests to reflect that new
reality. Otherwise everything still passes, and my other tests look fine
too.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
cleanups: remove unused variable from exec_cmd.c
Not sure whether it should be removed, or whether
execv_git_cmd() should return it rather than -1 at bottom.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not sure whether it should be removed, or whether
execv_git_cmd() should return it rather than -1 at bottom.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
cleanups: prevent leak of two strduped strings in config.c
Config_filename and lockfile are strduped and then leaked in
git_config_set_multivar.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Config_filename and lockfile are strduped and then leaked in
git_config_set_multivar.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
cleanups: Remove impossible case in quote.c
The switch is inside an if statement which is false if
the character is ' '. Either the if should be <=' '
instead of <' ', or the case should be removed as it could
be misleading.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The switch is inside an if statement which is false if
the character is ' '. Either the if should be <=' '
instead of <' ', or the case should be removed as it could
be misleading.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
cleanups: Remove unused vars from combine-diff.c
Mod_type in particular sure looks like it wants to be used, but isn't.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mod_type in particular sure looks like it wants to be used, but isn't.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
cleanups: Fix potential bugs in connect.c
The strncmp for ACK was ACK does not include the final space.
Presumably either we should either remove the trailing space,
or compare 4 chars (as this patch does).
'path' is sometimes strdup'ed, but never freed.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The strncmp for ACK was ACK does not include the final space.
Presumably either we should either remove the trailing space,
or compare 4 chars (as this patch does).
'path' is sometimes strdup'ed, but never freed.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'jc/boundary'
* jc/boundary:
rev-list --boundary: show boundary commits even when limited otherwise.
* jc/boundary:
rev-list --boundary: show boundary commits even when limited otherwise.
Merge branch 'jc/bottomless'
* jc/bottomless:
rev-list --bisect: limit list before bisecting.
* jc/bottomless:
rev-list --bisect: limit list before bisecting.
Allow empty lines in info/grafts
In addition to the existing comment support, that just allows the user
to use a convention that works pretty much everywhere else.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In addition to the existing comment support, that just allows the user
to use a convention that works pretty much everywhere else.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
rev-list --header: output format fix
Initial fix prepared by Johannes, but I did it slightly differently.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Initial fix prepared by Johannes, but I did it slightly differently.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'jc/boundary' into next
* jc/boundary:
rev-list --boundary: show boundary commits even when limited otherwise.
Makefile fixups.
gitk: Fix bug caused by missing commitlisted elements
* jc/boundary:
rev-list --boundary: show boundary commits even when limited otherwise.
Makefile fixups.
gitk: Fix bug caused by missing commitlisted elements
rev-list --boundary: show boundary commits even when limited otherwise.
The boundary commits are shown for UI like gitk to draw them as
soon as topo-order sorting allows, and should not be omitted by
get_revision() filtering logic. As long as their immediate
child commits are shown, we should not filter them out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The boundary commits are shown for UI like gitk to draw them as
soon as topo-order sorting allows, and should not be omitted by
get_revision() filtering logic. As long as their immediate
child commits are shown, we should not filter them out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Makefile fixups.
Signed-off-by: A Large Angry SCM <gitzilla@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: A Large Angry SCM <gitzilla@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge git://git.kernel.org/pub/scm/gitk/gitk
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Fix bug caused by missing commitlisted elements
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Fix bug caused by missing commitlisted elements
gitk: Fix bug caused by missing commitlisted elements
This bug was reported by Yann Dirson, and results in an 'Error:
expected boolean value but got ""' dialog when scrolling to the bottom
of the graph under some circumstances. The issue is that git-rev-list
isn't outputting all the boundary commits when it is asked for commits
affecting only certain files. We already cope with that by adding the
missing boundary commits in addextraid, but there we weren't adding a
0 to the end of the commitlisted list when we added the extra id to
the end of the displayorder list.
This fixes it by appending 0 to commitlisted in addextraid, thus keeping
commitlisted and displayorder in sync.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This bug was reported by Yann Dirson, and results in an 'Error:
expected boolean value but got ""' dialog when scrolling to the bottom
of the graph under some circumstances. The issue is that git-rev-list
isn't outputting all the boundary commits when it is asked for commits
affecting only certain files. We already cope with that by adding the
missing boundary commits in addextraid, but there we weren't adding a
0 to the end of the commitlisted list when we added the extra id to
the end of the displayorder list.
This fixes it by appending 0 to commitlisted in addextraid, thus keeping
commitlisted and displayorder in sync.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Merge branch 'master' into next
* master:
reading $GIT_DIR/info/graft - skip comments correctly.
* master:
reading $GIT_DIR/info/graft - skip comments correctly.
Merge branch 'lt/logopt' into next
* lt/logopt:
Fixes for option parsing
* lt/logopt:
Fixes for option parsing
Fixes for option parsing
Make sure "git show" always show the header, regardless of whether there
is a diff or not.
Also, make sure "always_show_header" actually works, since generate_header
only tested it in one out of three return paths.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make sure "git show" always show the header, regardless of whether there
is a diff or not.
Also, make sure "always_show_header" actually works, since generate_header
only tested it in one out of three return paths.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
reading $GIT_DIR/info/graft - skip comments correctly.
Noticed by Yann Dirson.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Noticed by Yann Dirson.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'lt/logopt' into next
* lt/logopt:
log/whatchanged/show - log formatting cleanup.
Simplify common default options setup for built-in log family.
* lt/logopt:
log/whatchanged/show - log formatting cleanup.
Simplify common default options setup for built-in log family.
log/whatchanged/show - log formatting cleanup.
This moves the decision to print the log message, while diff
options are in effect, to log-tree. It gives behaviour closer
to the traditional one.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the decision to print the log message, while diff
options are in effect, to log-tree. It gives behaviour closer
to the traditional one.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Simplify common default options setup for built-in log family.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'master' into lt/logopt
* master:
pager: do not fork a pager if PAGER is set to empty.
diff-options: add --patch-with-stat
diff-files --stat: do not dump core with unmerged index.
Support "git cmd --help" syntax
diff --stat: do not do its own three-dashes.
diff-tree: typefix.
GIT v1.3.0-rc4
xdiff: post-process hunks to make them consistent.
* master:
pager: do not fork a pager if PAGER is set to empty.
diff-options: add --patch-with-stat
diff-files --stat: do not dump core with unmerged index.
Support "git cmd --help" syntax
diff --stat: do not do its own three-dashes.
diff-tree: typefix.
GIT v1.3.0-rc4
xdiff: post-process hunks to make them consistent.
Merge branch 'jc/pager-cat' into next
* jc/pager-cat:
Do not fork PAGER=cat
pager: do not fork a pager if PAGER is set to empty.
* jc/pager-cat:
Do not fork PAGER=cat
pager: do not fork a pager if PAGER is set to empty.
Do not fork PAGER=cat
Unless the user has a nonstandard "cat" command that does not
meow like a cat, this should not break anything and would save an
extra pipe.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Unless the user has a nonstandard "cat" command that does not
meow like a cat, this should not break anything and would save an
extra pipe.
Signed-off-by: Junio C Hamano <junkio@cox.net>
pager: do not fork a pager if PAGER is set to empty.
This skips an extra pipe, and helps debugging tremendously.
[jc: PAGER=cat is a questionable hack and should be done as a separate
patch. ]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This skips an extra pipe, and helps debugging tremendously.
[jc: PAGER=cat is a questionable hack and should be done as a separate
patch. ]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'lt/logopt' into next
* lt/logopt:
Tentative built-in "git show"
Built-in git-whatchanged.
rev-list option parser fix.
Split init_revisions() out of setup_revisions()
* lt/logopt:
Tentative built-in "git show"
Built-in git-whatchanged.
rev-list option parser fix.
Split init_revisions() out of setup_revisions()
Tentative built-in "git show"
This uses the "--no-walk" flag that I never actually implemented (but I'm
sure I mentioned it) to make "git show" be essentially the same thing as
"git whatchanged --no-walk".
It just refuses to add more interesting parents to the revision walking
history, so you don't actually get any history, you just get the commit
you asked for.
I was going to add "--no-walk" as a real argument flag to git-rev-list
too, but I'm not sure anybody actually needs it. Although it might be
useful for porcelain, so I left the door open.
[jc: ported to the unified option structure by Linus]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This uses the "--no-walk" flag that I never actually implemented (but I'm
sure I mentioned it) to make "git show" be essentially the same thing as
"git whatchanged --no-walk".
It just refuses to add more interesting parents to the revision walking
history, so you don't actually get any history, you just get the commit
you asked for.
I was going to add "--no-walk" as a real argument flag to git-rev-list
too, but I'm not sure anybody actually needs it. Although it might be
useful for porcelain, so I left the door open.
[jc: ported to the unified option structure by Linus]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Built-in git-whatchanged.
Split internal "git log" into reusable piece and add "git
whatchanged". This is based on the option parsing unification
work Linus did.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Split internal "git log" into reusable piece and add "git
whatchanged". This is based on the option parsing unification
work Linus did.
Signed-off-by: Junio C Hamano <junkio@cox.net>
rev-list option parser fix.
The big option parser unification broke rev-list the big way;
this makes it use options from the parsed revs structure.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The big option parser unification broke rev-list the big way;
this makes it use options from the parsed revs structure.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Split init_revisions() out of setup_revisions()
Merging all three option parsers related to whatchanged is
unarguably the right thing, but the fallout was too big to scare
me away. Let's try it once again, but once step at time.
This splits out init_revisions() call from setup_revisions(), so
that the callers can set different defaults to match the
traditional benaviour.
The rev-list command is still broken in a big way, which is the
topic of next step.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merging all three option parsers related to whatchanged is
unarguably the right thing, but the fallout was too big to scare
me away. Let's try it once again, but once step at time.
This splits out init_revisions() call from setup_revisions(), so
that the callers can set different defaults to match the
traditional benaviour.
The rev-list command is still broken in a big way, which is the
topic of next step.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'js/diffstat' into next
* js/diffstat:
diff-options: add --patch-with-stat
diff-files --stat: do not dump core with unmerged index.
Support "git cmd --help" syntax
diff --stat: do not do its own three-dashes.
* js/diffstat:
diff-options: add --patch-with-stat
diff-files --stat: do not dump core with unmerged index.
Support "git cmd --help" syntax
diff --stat: do not do its own three-dashes.
Merge branch 'lt/show' into next
* lt/show:
Tentative built-in "git show"
* lt/show:
Tentative built-in "git show"
diff-options: add --patch-with-stat
With this option, git prepends a diffstat in front of the patch.
Since I really, really do not know what a diffstat of a combined diff
("merge diff") should look like, the diffstat is not generated for these.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this option, git prepends a diffstat in front of the patch.
Since I really, really do not know what a diffstat of a combined diff
("merge diff") should look like, the diffstat is not generated for these.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff-files --stat: do not dump core with unmerged index.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Support "git cmd --help" syntax
The "--help" argument is special, in that it is (along with "--version")
in that is taken by the "git" program itself rather than the sub-command,
and thus we've had the syntax "git --help cmd".
However, as anybody who has ever used CVS or some similar devil-spawn
program, it's confusing as h*ll when options before the sub-command act
differently from options after the sub-command, so this quick hack just
makes it acceptable to do "git cmd --help" instead, and get the exact same
result.
It may be hacky, but it's simple and does the trick.
Of course, this does not help if you use one of the non-builtin commands
without using the "git" helper. Ie you won't be getting a man-page just
because you do "git-rev-list --help". Don't expect us to be quite _that_
helpful.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The "--help" argument is special, in that it is (along with "--version")
in that is taken by the "git" program itself rather than the sub-command,
and thus we've had the syntax "git --help cmd".
However, as anybody who has ever used CVS or some similar devil-spawn
program, it's confusing as h*ll when options before the sub-command act
differently from options after the sub-command, so this quick hack just
makes it acceptable to do "git cmd --help" instead, and get the exact same
result.
It may be hacky, but it's simple and does the trick.
Of course, this does not help if you use one of the non-builtin commands
without using the "git" helper. Ie you won't be getting a man-page just
because you do "git-rev-list --help". Don't expect us to be quite _that_
helpful.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Tentative built-in "git show"
This uses the "--no-walk" flag that I never actually implemented (but I'm
sure I mentioned it) to make "git show" be essentially the same thing as
"git whatchanged --no-walk".
It just refuses to add more interesting parents to the revision walking
history, so you don't actually get any history, you just get the commit
you asked for.
I was going to add "--no-walk" as a real argument flag to git-rev-list
too, but I'm not sure anybody actually needs it. Although it might be
useful for porcelain, so I left the door open.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This uses the "--no-walk" flag that I never actually implemented (but I'm
sure I mentioned it) to make "git show" be essentially the same thing as
"git whatchanged --no-walk".
It just refuses to add more interesting parents to the revision walking
history, so you don't actually get any history, you just get the commit
you asked for.
I was going to add "--no-walk" as a real argument flag to git-rev-list
too, but I'm not sure anybody actually needs it. Although it might be
useful for porcelain, so I left the door open.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff --stat: do not do its own three-dashes.
I missed that "git-diff-* --stat" spits out three-dash separator
on its own without being asked. Remove it.
When we output commit log followed by diff, perhaps --patch-with-stat,
for downstream consumer, we _would_ want the three-dash between
the message and the diff material, but that logic belongs to the
caller, not diff generator.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I missed that "git-diff-* --stat" spits out three-dash separator
on its own without being asked. Remove it.
When we output commit log followed by diff, perhaps --patch-with-stat,
for downstream consumer, we _would_ want the three-dash between
the message and the diff material, but that logic belongs to the
caller, not diff generator.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'jc/logopt' into next
* jc/logopt: (37 commits)
1fc70b6
Author: Junio C Hamano <junkio@cox.net>
Date: Sat Apr 15 04:15:07 2006 -0700
Built-in git-whatchanged
Now "git log" is in reusable shape, add "git whatchanged" which
essentially is a synonym with different default for people whose
fingers are already trained.
There is a subtle difference from the shell-script version; the
first line of each entry is now "commit <object name>", instead
of "diff-tree <object name> (from <object name>)." I suspect
that showing the parent name that way is useful, so this may be
something we would want to fix (the user can say --pretty=raw to
get that information but that is a bit ugly).
Signed-off-by: Junio C Hamano <junkio@cox.net>
:100644 100644 22fec3d... 939a34c... M git.c
...
* jc/logopt: (37 commits)
1fc70b6
Author: Junio C Hamano <junkio@cox.net>
Date: Sat Apr 15 04:15:07 2006 -0700
Built-in git-whatchanged
Now "git log" is in reusable shape, add "git whatchanged" which
essentially is a synonym with different default for people whose
fingers are already trained.
There is a subtle difference from the shell-script version; the
first line of each entry is now "commit <object name>", instead
of "diff-tree <object name> (from <object name>)." I suspect
that showing the parent name that way is useful, so this may be
something we would want to fix (the user can say --pretty=raw to
get that information but that is a bit ugly).
Signed-off-by: Junio C Hamano <junkio@cox.net>
:100644 100644 22fec3d... 939a34c... M git.c
...
Built-in git-whatchanged
Now "git log" is in reusable shape, add "git whatchanged" which
essentially is a synonym with different default for people whose
fingers are already trained.
There is a subtle difference from the shell-script version; the
first line of each entry is now "commit <object name>", instead
of "diff-tree <object name> (from <object name>)." I suspect
that showing the parent name that way is useful, so this may be
something we would want to fix (the user can say --pretty=raw to
get that information but that is a bit ugly).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now "git log" is in reusable shape, add "git whatchanged" which
essentially is a synonym with different default for people whose
fingers are already trained.
There is a subtle difference from the shell-script version; the
first line of each entry is now "commit <object name>", instead
of "diff-tree <object name> (from <object name>)." I suspect
that showing the parent name that way is useful, so this may be
something we would want to fix (the user can say --pretty=raw to
get that information but that is a bit ugly).
Signed-off-by: Junio C Hamano <junkio@cox.net>
whatchanged options parser fix.
We need to have two sets of diff_options structure and abbrev
settings, but there is no point having two separate commit
format setting. Fix the confusion.
Also properly initialize the command options structure.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We need to have two sets of diff_options structure and abbrev
settings, but there is no point having two separate commit
format setting. Fix the confusion.
Also properly initialize the command options structure.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'jc/logopt' into next
* jc/logopt:
Extract "log [diff options]" parser out.
diff-tree: typefix.
* jc/logopt:
Extract "log [diff options]" parser out.
diff-tree: typefix.
Extract "log [diff options]" parser out.
Merging of the log-tree-opt structure with rev-info structure
did not work out very well and it broke things that did not want
diff options and/or rev options.
This is an alternative approach to define a combined interface
that can be used by commands that wants both. The use of it is
opt-in to reduce the risk of breaking existing programs.
We might want to slurp "setup_revisions() places things in
pending objects list" part from Linus's earlier attempt.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merging of the log-tree-opt structure with rev-info structure
did not work out very well and it broke things that did not want
diff options and/or rev options.
This is an alternative approach to define a combined interface
that can be used by commands that wants both. The use of it is
opt-in to reduce the risk of breaking existing programs.
We might want to slurp "setup_revisions() places things in
pending objects list" part from Linus's earlier attempt.
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff-tree: typefix.
Recent diff_tree_setup_paths() update made it take a second
argument of type "struct diff_options", but we passed another
struct that happenes to have that type at the beginning by
mistake.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Recent diff_tree_setup_paths() update made it take a second
argument of type "struct diff_options", but we passed another
struct that happenes to have that type at the beginning by
mistake.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'jc/simpack' into next
* jc/simpack:
Clean-up Geert's similarity fingerprint code.
* jc/simpack:
Clean-up Geert's similarity fingerprint code.
Clean-up Geert's similarity fingerprint code.
This splits Geert's similarity fingerprint code into main
program and fingerprinting function. The next step would be to
try using this in pack-objects.c::try_delta() -- which would be
a good evaluation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This splits Geert's similarity fingerprint code into main
program and fingerprinting function. The next step would be to
try using this in pack-objects.c::try_delta() -- which would be
a good evaluation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'jc/logopt' into next
* jc/logopt:
Revert all the rev-list option parsing changes.
* jc/logopt:
Revert all the rev-list option parsing changes.
Revert all the rev-list option parsing changes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'master' into next
* master:
GIT v1.3.0-rc4
* master:
GIT v1.3.0-rc4
GIT v1.3.0-rc4
I've merged everything I think is ready for 1.3.0, so this is
the final round -- hopefully I can release this with minimum
last-minute fixup as v1.3.0 early next week.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I've merged everything I think is ready for 1.3.0, so this is
the final round -- hopefully I can release this with minimum
last-minute fixup as v1.3.0 early next week.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'dl/xdiff'
* dl/xdiff:
xdiff: post-process hunks to make them consistent.
* dl/xdiff:
xdiff: post-process hunks to make them consistent.
Merge branch 'lt/logopt' into next
* lt/logopt:
Fix up rev-list option parsing.
Fix up default abbrev in setup_revisions() argument parser.
Common option parsing for "git log --diff" and friends
* lt/logopt:
Fix up rev-list option parsing.
Fix up default abbrev in setup_revisions() argument parser.
Common option parsing for "git log --diff" and friends
Fix up rev-list option parsing.
rev-list does not take diff options, so barf after seeing some.
Signed-off-by: Junio C Hamano <junkio@cox.net>
rev-list does not take diff options, so barf after seeing some.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix up default abbrev in setup_revisions() argument parser.
The default abbreviation precision should be DEFAULT_ABBREV as before.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The default abbreviation precision should be DEFAULT_ABBREV as before.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Common option parsing for "git log --diff" and friends
This basically does a few things that are sadly somewhat interdependent,
and nontrivial to split out
- get rid of "struct log_tree_opt"
The fields in "log_tree_opt" are moved into "struct rev_info", and all
users of log_tree_opt are changed to use the rev_info struct instead.
- add the parsing for the log_tree_opt arguments to "setup_revision()"
- make setup_revision set a flag (revs->diff) if the diff-related
arguments were used. This allows "git log" to decide whether it wants
to show diffs or not.
- make setup_revision() also initialize the diffopt part of rev_info
(which we had from before, but we just didn't initialize it)
- make setup_revision() do all the "finishing touches" on it all (it will
do the proper flag combination logic, and call "diff_setup_done()")
Now, that was the easy and straightforward part.
The slightly more involved part is that some of the programs that want to
use the new-and-improved rev_info parsing don't actually want _commits_,
they may want tree'ish arguments instead. That meant that I had to change
setup_revision() to parse the arguments not into the "revs->commits" list,
but into the "revs->pending_objects" list.
Then, when we do "prepare_revision_walk()", we walk that list, and create
the sorted commit list from there.
This actually cleaned some stuff up, but it's the less obvious part of the
patch, and re-organized the "revision.c" logic somewhat. It actually paves
the way for splitting argument parsing _entirely_ out of "revision.c",
since now the argument parsing really is totally independent of the commit
walking: that didn't use to be true, since there was lots of overlap with
get_commit_reference() handling etc, now the _only_ overlap is the shared
(and trivial) "add_pending_object()" thing.
However, I didn't do that file split, just because I wanted the diff
itself to be smaller, and show the actual changes more clearly. If this
gets accepted, I'll do further cleanups then - that includes the file
split, but also using the new infrastructure to do a nicer "git diff" etc.
Even in this form, it actually ends up removing more lines than it adds.
It's nice to note how simple and straightforward this makes the built-in
"git log" command, even though it continues to support all the diff flags
too. It doesn't get much simpler that this.
I think this is worth merging soonish, because it does allow for future
cleanup and even more sharing of code. However, it obviously touches
"revision.c", which is subtle. I've tested that it passes all the tests we
have, and it passes my "looks sane" detector, but somebody else should
also give it a good look-over.
[jc: squashed the original and three "oops this too" updates, with
another fix-up.]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This basically does a few things that are sadly somewhat interdependent,
and nontrivial to split out
- get rid of "struct log_tree_opt"
The fields in "log_tree_opt" are moved into "struct rev_info", and all
users of log_tree_opt are changed to use the rev_info struct instead.
- add the parsing for the log_tree_opt arguments to "setup_revision()"
- make setup_revision set a flag (revs->diff) if the diff-related
arguments were used. This allows "git log" to decide whether it wants
to show diffs or not.
- make setup_revision() also initialize the diffopt part of rev_info
(which we had from before, but we just didn't initialize it)
- make setup_revision() do all the "finishing touches" on it all (it will
do the proper flag combination logic, and call "diff_setup_done()")
Now, that was the easy and straightforward part.
The slightly more involved part is that some of the programs that want to
use the new-and-improved rev_info parsing don't actually want _commits_,
they may want tree'ish arguments instead. That meant that I had to change
setup_revision() to parse the arguments not into the "revs->commits" list,
but into the "revs->pending_objects" list.
Then, when we do "prepare_revision_walk()", we walk that list, and create
the sorted commit list from there.
This actually cleaned some stuff up, but it's the less obvious part of the
patch, and re-organized the "revision.c" logic somewhat. It actually paves
the way for splitting argument parsing _entirely_ out of "revision.c",
since now the argument parsing really is totally independent of the commit
walking: that didn't use to be true, since there was lots of overlap with
get_commit_reference() handling etc, now the _only_ overlap is the shared
(and trivial) "add_pending_object()" thing.
However, I didn't do that file split, just because I wanted the diff
itself to be smaller, and show the actual changes more clearly. If this
gets accepted, I'll do further cleanups then - that includes the file
split, but also using the new infrastructure to do a nicer "git diff" etc.
Even in this form, it actually ends up removing more lines than it adds.
It's nice to note how simple and straightforward this makes the built-in
"git log" command, even though it continues to support all the diff flags
too. It doesn't get much simpler that this.
I think this is worth merging soonish, because it does allow for future
cleanup and even more sharing of code. However, it obviously touches
"revision.c", which is subtle. I've tested that it passes all the tests we
have, and it passes my "looks sane" detector, but somebody else should
also give it a good look-over.
[jc: squashed the original and three "oops this too" updates, with
another fix-up.]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'jc/bottomless' into next
* jc/bottomless:
rev-list --bisect: limit list before bisecting.
Clean up trailing whitespace when pretty-printing commits
"git cmd -h" for shell scripts.
git-log <diff-options> <paths> documentation
Retire git-log.sh (take #4)
stripspace: incomplete line fix (take #2)
* jc/bottomless:
rev-list --bisect: limit list before bisecting.
Clean up trailing whitespace when pretty-printing commits
"git cmd -h" for shell scripts.
git-log <diff-options> <paths> documentation
Retire git-log.sh (take #4)
stripspace: incomplete line fix (take #2)
Merge branch 'js/diffstat'
* js/diffstat:
diff --stat: no need to ask funcnames nor context.
diff-options: add --stat (take 2)
diff-options: add --stat (take 2)
* js/diffstat:
diff --stat: no need to ask funcnames nor context.
diff-options: add --stat (take 2)
diff-options: add --stat (take 2)
Merge branch 'jc/fix5500'
* jc/fix5500:
t5500: test fix
* jc/fix5500:
t5500: test fix
rev-list --bisect: limit list before bisecting.
I noticed bisect does not work well without both good and bad.
Running this script in git.git repository would give you quite
different results:
#!/bin/sh
initial=e83c5163316f89bfbde7d9ab23ca2e25604af290
mid0=`git rev-list --bisect ^$initial --all`
git rev-list $mid0 | wc -l
git rev-list ^$mid0 --all | wc -l
mid1=`git rev-list --bisect --all`
git rev-list $mid1 | wc -l
git rev-list ^$mid1 --all | wc -l
The $initial commit is the very first commit you made. The
first midpoint bisects things evenly as designed, but the latter
does not.
The reason I got interested in this was because I was wondering
if something like the following would help people converting a
huge repository from foreign SCM, or preparing a repository to
be fetched over plain dumb HTTP only:
#!/bin/sh
N=4
P=.git/objects/pack
bottom=
while test 0 \< $N
do
N=$((N-1))
if test -z "$bottom"
then
newbottom=`git rev-list --bisect --all`
else
newbottom=`git rev-list --bisect ^$bottom --all`
fi
if test -z "$bottom"
then
rev_list="$newbottom"
elif test 0 = $N
then
rev_list="^$bottom --all"
else
rev_list="^$bottom $newbottom"
fi
p=$(git rev-list --unpacked --objects $rev_list |
git pack-objects $P/pack)
git show-index <$P/pack-$p.idx | wc -l
bottom=$newbottom
done
The idea is to pack older half of the history to one pack, then
older half of the remaining history to another, to continue a
few times, using finer granularity as we get closer to the tip.
This may not matter, since for a truly huge history, running
bisect number of times could be quite time consuming, and we
might be better off running "git rev-list --all" once into a
temporary file, and manually pick cut-off points from the
resulting list of commits. After all we are talking about
"approximately half" for such an usage, and older history does
not matter much.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I noticed bisect does not work well without both good and bad.
Running this script in git.git repository would give you quite
different results:
#!/bin/sh
initial=e83c5163316f89bfbde7d9ab23ca2e25604af290
mid0=`git rev-list --bisect ^$initial --all`
git rev-list $mid0 | wc -l
git rev-list ^$mid0 --all | wc -l
mid1=`git rev-list --bisect --all`
git rev-list $mid1 | wc -l
git rev-list ^$mid1 --all | wc -l
The $initial commit is the very first commit you made. The
first midpoint bisects things evenly as designed, but the latter
does not.
The reason I got interested in this was because I was wondering
if something like the following would help people converting a
huge repository from foreign SCM, or preparing a repository to
be fetched over plain dumb HTTP only:
#!/bin/sh
N=4
P=.git/objects/pack
bottom=
while test 0 \< $N
do
N=$((N-1))
if test -z "$bottom"
then
newbottom=`git rev-list --bisect --all`
else
newbottom=`git rev-list --bisect ^$bottom --all`
fi
if test -z "$bottom"
then
rev_list="$newbottom"
elif test 0 = $N
then
rev_list="^$bottom --all"
else
rev_list="^$bottom $newbottom"
fi
p=$(git rev-list --unpacked --objects $rev_list |
git pack-objects $P/pack)
git show-index <$P/pack-$p.idx | wc -l
bottom=$newbottom
done
The idea is to pack older half of the history to one pack, then
older half of the remaining history to another, to continue a
few times, using finer granularity as we get closer to the tip.
This may not matter, since for a truly huge history, running
bisect number of times could be quite time consuming, and we
might be better off running "git rev-list --all" once into a
temporary file, and manually pick cut-off points from the
resulting list of commits. After all we are talking about
"approximately half" for such an usage, and older history does
not matter much.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Clean up trailing whitespace when pretty-printing commits
Partly because we've messed up and now have some commits with trailing
whitespace, but partly because this also just simplifies the code, let's
remove trailing whitespace from the end when pretty-printing commits.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Partly because we've messed up and now have some commits with trailing
whitespace, but partly because this also just simplifies the code, let's
remove trailing whitespace from the end when pretty-printing commits.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git cmd -h" for shell scripts.
Wrappers that use sh-setup took --help but not -h. Noticed by
Sébastien Pierre.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Wrappers that use sh-setup took --help but not -h. Noticed by
Sébastien Pierre.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-log <diff-options> <paths> documentation
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Retire git-log.sh (take #4)
Noticed by Johannes. We do not install it anymore, but still have
been shipping the source, which was crazy.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Noticed by Johannes. We do not install it anymore, but still have
been shipping the source, which was crazy.
Signed-off-by: Junio C Hamano <junkio@cox.net>
stripspace: incomplete line fix (take #2)
This fixes f4ee3eb68906f079dea45de4f1bbb03d68189eb3 breakage, which
added an extra trailing blank line after stripping trailing blank lines
by mistake.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes f4ee3eb68906f079dea45de4f1bbb03d68189eb3 breakage, which
added an extra trailing blank line after stripping trailing blank lines
by mistake.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'jc/fix5500' into next
* jc/fix5500:
t5500: test fix
* jc/fix5500:
t5500: test fix
Merge branch 'js/diffstat' into next
* js/diffstat:
diff --stat: no need to ask funcnames nor context.
* js/diffstat:
diff --stat: no need to ask funcnames nor context.
t5500: test fix
Relying on eye-candy progress bar was fragile to begin with.
Run fetch-pack with -k option, and count the objects that are in
the pack that were transferred from the other end.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Relying on eye-candy progress bar was fragile to begin with.
Run fetch-pack with -k option, and count the objects that are in
the pack that were transferred from the other end.
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff --stat: no need to ask funcnames nor context.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'master' into next
* master:
Fix-up previous expr changes.
* master:
Fix-up previous expr changes.
Fix-up previous expr changes.
The regexp on the right hand side of expr : operator somehow was
broken.
expr 'z+pu:refs/tags/ko-pu' : 'z\+\(.*\)'
does not strip '+'; write 'z+\(.*\)' instead.
We probably should switch to shell based substring post 1.3.0;
that's not bashism but just POSIX anyway.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The regexp on the right hand side of expr : operator somehow was
broken.
expr 'z+pu:refs/tags/ko-pu' : 'z\+\(.*\)'
does not strip '+'; write 'z+\(.*\)' instead.
We probably should switch to shell based substring post 1.3.0;
that's not bashism but just POSIX anyway.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'js/diffstat' into next
* js/diffstat:
diff-options: add --stat (take 2)
diff-options: add --stat (take 2)
* js/diffstat:
diff-options: add --stat (take 2)
diff-options: add --stat (take 2)
diff-options: add --stat (take 2)
... and a fix for an invalid free():
Signed-off-by: Junio C Hamano <junkio@cox.net>
... and a fix for an invalid free():
Signed-off-by: Junio C Hamano <junkio@cox.net>
xdiff: post-process hunks to make them consistent.
diff-options: add --stat (take 2)
Now, you can say "git diff --stat" (to get an idea how many changes are
uncommitted), or "git log --stat".
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now, you can say "git diff --stat" (to get an idea how many changes are
uncommitted), or "git log --stat".
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shell utilities: Guard against expr' magic tokens.
Some words, e.g., `match', are special to expr(1), and cause strange
parsing effects. Track down all uses of expr and mangle the arguments
so that this isn't a problem.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some words, e.g., `match', are special to expr(1), and cause strange
parsing effects. Track down all uses of expr and mangle the arguments
so that this isn't a problem.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
t3600-rm: skip failed-remove test when we cannot make an unremovable file.
When running t3600-rm test under fakeroot (or as root), we
cannot make a file unremovable with "chmod a-w .". Detect this
case early and skip that test.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When running t3600-rm test under fakeroot (or as root), we
cannot make a file unremovable with "chmod a-w .". Detect this
case early and skip that test.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use less memory in "git log"
This trivially avoids keeping the commit message data around after we
don't need it any more, avoiding a continually growing "git log" memory
footprint.
It's not a huge deal, but it's somewhat noticeable. For the current kernel
tree, doing a full "git log" I got
- before: /usr/bin/time git log > /dev/null
0.81user 0.02system 0:00.84elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+8851minor)pagefaults 0swaps
- after: /usr/bin/time git log > /dev/null
0.79user 0.03system 0:00.83elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+5039minor)pagefaults 0swaps
ie the touched pages dropped from 8851 to 5039. For the historic kernel
archive, the numbers are 18357->11037 minor page faults.
We could/should in theory free the commits themselves, but that's really a
lot harder, since during revision traversal we may hit the same commit
twice through different children having it as a parent, even after we've
shown it once (when that happens, we'll silently ignore it next time, but
we still need the "struct commit" to know).
And as the commit message data is clearly the biggest part of the commit,
this is the really easy 60% solution.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This trivially avoids keeping the commit message data around after we
don't need it any more, avoiding a continually growing "git log" memory
footprint.
It's not a huge deal, but it's somewhat noticeable. For the current kernel
tree, doing a full "git log" I got
- before: /usr/bin/time git log > /dev/null
0.81user 0.02system 0:00.84elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+8851minor)pagefaults 0swaps
- after: /usr/bin/time git log > /dev/null
0.79user 0.03system 0:00.83elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+5039minor)pagefaults 0swaps
ie the touched pages dropped from 8851 to 5039. For the historic kernel
archive, the numbers are 18357->11037 minor page faults.
We could/should in theory free the commits themselves, but that's really a
lot harder, since during revision traversal we may hit the same commit
twice through different children having it as a parent, even after we've
shown it once (when that happens, we'll silently ignore it next time, but
we still need the "struct commit" to know).
And as the commit message data is clearly the biggest part of the commit,
this is the really easy 60% solution.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-log: do not output excess blank line between commits
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Makefile: $(MAKE) check-docs
This target lists undocumented commands, and/or whose document
is not referenced from the main git documentation.
For now, there are some exceptions I added primarily because I
lack the energy to document them myself:
- merge backends (we should really document them)
- ssh-push/ssh-pull (does anybody still use them?)
- annotate and blame (maybe after one of them eats the other ;-)
Signed-off-by: Junio C Hamano <junkio@cox.net>
This target lists undocumented commands, and/or whose document
is not referenced from the main git documentation.
For now, there are some exceptions I added primarily because I
lack the energy to document them myself:
- merge backends (we should really document them)
- ssh-push/ssh-pull (does anybody still use them?)
- annotate and blame (maybe after one of them eats the other ;-)
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation: add a couple of missing docs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>