git svn: Support multiple branch and tag paths in the svn repository.
This enables git-svn.perl to read multiple 'branches' and 'tags' entries in
svn-remote config sections. The init and clone subcommands also support
multiple --branches and --tags arguments.
The branch (and tag) subcommand gets a new argument: --destination (or -d).
This argument is required if there are multiple branches (or tags) entries
configured for the remote Subversion repository. The argument's value
specifies which branch (or tag) path to use to create the branch (or tag).
The specified value must match the left side (without wildcards) of one of
the branches (or tags) refspecs in the svn-remote's config.
[ew: avoided explicit loop when combining globs with "push"]
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
This enables git-svn.perl to read multiple 'branches' and 'tags' entries in
svn-remote config sections. The init and clone subcommands also support
multiple --branches and --tags arguments.
The branch (and tag) subcommand gets a new argument: --destination (or -d).
This argument is required if there are multiple branches (or tags) entries
configured for the remote Subversion repository. The argument's value
specifies which branch (or tag) path to use to create the branch (or tag).
The specified value must match the left side (without wildcards) of one of
the branches (or tags) refspecs in the svn-remote's config.
[ew: avoided explicit loop when combining globs with "push"]
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Add 'git svn reset' to unwind 'git svn fetch'
Add a command to unwind the effects of fetch by moving the rev_map
and refs/remotes/git-svn back to an old SVN revision. This allows
revisions to be re-fetched. Ideally SVN revs would be immutable,
but permissions changes in the SVN repository or indiscriminate use
of '--ignore-paths' can create situations where fetch cannot make
progress.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Add a command to unwind the effects of fetch by moving the rev_map
and refs/remotes/git-svn back to an old SVN revision. This allows
revisions to be re-fetched. Ideally SVN revs would be immutable,
but permissions changes in the SVN repository or indiscriminate use
of '--ignore-paths' can create situations where fetch cannot make
progress.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn: speed up find_rev_before
By limiting start revision of find_rev_before to max existing
revision. This avoids a long wait if you do
'git svn reset -r 9999999'. The linear search within the
contiguous revisions doesn't seem to be a problem.
[ew: expanded commit message]
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
By limiting start revision of find_rev_before to max existing
revision. This avoids a long wait if you do
'git svn reset -r 9999999'. The linear search within the
contiguous revisions doesn't seem to be a problem.
[ew: expanded commit message]
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Add 'git svn help [cmd]' which works outside a repo.
Previously there was no explicit 'help' command, but 'git svn help'
still printed the usage message (as an invalid command), provided you
got past the initialization steps that required a valid repo.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Previously there was no explicit 'help' command, but 'git svn help'
still printed the usage message (as an invalid command), provided you
got past the initialization steps that required a valid repo.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn: let 'dcommit $rev' work on $rev instead of HEAD
'git svn dcommit' takes an optional revision argument, but the meaning
of it was rather scary. It completely ignored the current state of
the HEAD, only looking at the revisions between SVN and $rev. If HEAD
was attached to $branch, the branch lost all commits $rev..$branch in
the process.
Considering that 'git svn dcommit HEAD^' has the intuitive meaning
"dcommit all changes on my branch except the last one", we change the
meaning of the revision argument. git-svn temporarily checks out $rev
for its work, meaning that
* if a branch is specified, that branch (_not_ the HEAD) is rebased as
part of the dcommit,
* if some other revision is specified, as in the example, all work
happens on a detached HEAD and no branch is affected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
'git svn dcommit' takes an optional revision argument, but the meaning
of it was rather scary. It completely ignored the current state of
the HEAD, only looking at the revisions between SVN and $rev. If HEAD
was attached to $branch, the branch lost all commits $rev..$branch in
the process.
Considering that 'git svn dcommit HEAD^' has the intuitive meaning
"dcommit all changes on my branch except the last one", we change the
meaning of the revision argument. git-svn temporarily checks out $rev
for its work, meaning that
* if a branch is specified, that branch (_not_ the HEAD) is rebased as
part of the dcommit,
* if some other revision is specified, as in the example, all work
happens on a detached HEAD and no branch is affected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
Merge branch 'maint'
* maint:
t3700-add: add a POSIXPERM prerequisite to a new test
* maint:
t3700-add: add a POSIXPERM prerequisite to a new test
t3700-add: add a POSIXPERM prerequisite to a new test
The new test does a 'chmod 0', which does not have the intended
effect on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new test does a 'chmod 0', which does not have the intended
effect on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'sb/maint-1.6.0-add-config-fix' into maint
* sb/maint-1.6.0-add-config-fix:
add: allow configurations to be overriden by command line
* sb/maint-1.6.0-add-config-fix:
add: allow configurations to be overriden by command line
Sync with 1.6.3.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT 1.6.3.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'ak/maint-for-each-ref-no-lookup' into maint
* ak/maint-for-each-ref-no-lookup:
for-each-ref: Do not lookup objects when they will not be used
* ak/maint-for-each-ref-no-lookup:
for-each-ref: Do not lookup objects when they will not be used
Merge branch 'rc/maint-http-local-slot-fix' into maint
* rc/maint-http-local-slot-fix:
http*: cleanup slot->local after fclose
* rc/maint-http-local-slot-fix:
http*: cleanup slot->local after fclose
Merge branch 'cb/maint-no-double-merge' into maint
* cb/maint-no-double-merge:
refuse to merge during a merge
* cb/maint-no-double-merge:
refuse to merge during a merge
Merge branch 'mn/maint-iconv-autoconf' into maint
* mn/maint-iconv-autoconf:
fix handling of iconv configuration options
* mn/maint-iconv-autoconf:
fix handling of iconv configuration options
Merge branch 'lt/maint-unsigned-left-shift' into maint
* lt/maint-unsigned-left-shift:
Fix big left-shifts of unsigned char
* lt/maint-unsigned-left-shift:
Fix big left-shifts of unsigned char
Merge branch 'pb/maint-1.6.2-userdiff-fix' into maint
* pb/maint-1.6.2-userdiff-fix:
upload-archive: fix infinite loop on Cygwin
avoid exponential regex match for java and objc function names
* pb/maint-1.6.2-userdiff-fix:
upload-archive: fix infinite loop on Cygwin
avoid exponential regex match for java and objc function names
attribute: whitespace set to true detects all errors known to git
That is what the documentation says, but the code pretends as if all the
known whitespace error tokens were given.
Among the whitespace error tokens, there is one kind that loosens the rule
when set: cr-at-eol. Which means that whitespace error token that is set
to true ignores a newly introduced CR at the end, which is inconsistent
with the documentation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
That is what the documentation says, but the code pretends as if all the
known whitespace error tokens were given.
Among the whitespace error tokens, there is one kind that loosens the rule
when set: cr-at-eol. Which means that whitespace error token that is set
to true ignores a newly introduced CR at the end, which is inconsistent
with the documentation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
.gitattributes: CR at the end of the line is an error
When a CR is accidentally added at the end of a C source file in the git
project tree, "git diff --check" doesn't detect it as an error.
$ echo abQ | tr Q '\015' >>fast-import.c
$ git diff --check
I think this is because the "whitespace" attribute is set to *.[ch] files
without specifying what kind of errors are caught. It makes git "notice
all types of errors" (as described in the documentation), but I think it
is incorrectly setting cr-at-eol, too, and hides this error.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a CR is accidentally added at the end of a C source file in the git
project tree, "git diff --check" doesn't detect it as an error.
$ echo abQ | tr Q '\015' >>fast-import.c
$ git diff --check
I think this is because the "whitespace" attribute is set to *.[ch] files
without specifying what kind of errors are caught. It makes git "notice
all types of errors" (as described in the documentation), but I think it
is incorrectly setting cr-at-eol, too, and hides this error.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3505: fix abuse of test_expect_code
The test wanted to make sure that cherry-pick exits with status 1,
but with the way it was placed after "git checkout master &&" meant
that it could have misjudged success if checkout barfed with the
same failure status.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test wanted to make sure that cherry-pick exits with status 1,
but with the way it was placed after "git checkout master &&" meant
that it could have misjudged success if checkout barfed with the
same failure status.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
* maint:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
Merge branch 'maint-1.6.2' into maint
* maint-1.6.2:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
use xstrdup, not strdup in ll-merge.c
* maint-1.6.2:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
use xstrdup, not strdup in ll-merge.c
Merge branch 'maint-1.6.1' into maint-1.6.2
* maint-1.6.1:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
use xstrdup, not strdup in ll-merge.c
* maint-1.6.1:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
use xstrdup, not strdup in ll-merge.c
Merge branch 'maint-1.6.0' into maint-1.6.1
* maint-1.6.0:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
use xstrdup, not strdup in ll-merge.c
* maint-1.6.0:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
use xstrdup, not strdup in ll-merge.c
git-show-ref.txt: remove word and make consistent
Under is better than in because of the nested nature of the .git
directory.
"also using" sounds a little odd, plus we say combined with later on so
just use that.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Under is better than in because of the nested nature of the .git
directory.
"also using" sounds a little odd, plus we say combined with later on so
just use that.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix various sparse warnings in the git source code
There are a few remaining ones, but this fixes the trivial ones. It boils
down to two main issues that sparse complains about:
- warning: Using plain integer as NULL pointer
Sparse doesn't like you using '0' instead of 'NULL'. For various good
reasons, not the least of which is just the visual confusion. A NULL
pointer is not an integer, and that whole "0 works as NULL" is a
historical accident and not very pretty.
A few of these remain: zlib is a total mess, and Z_NULL is just a 0.
I didn't touch those.
- warning: symbol 'xyz' was not declared. Should it be static?
Sparse wants to see declarations for any functions you export. A lack
of a declaration tends to mean that you should either add one, or you
should mark the function 'static' to show that it's in file scope.
A few of these remain: I only did the ones that should obviously just
be made static.
That 'wt_status_submodule_summary' one is debatable. It has a few related
flags (like 'wt_status_use_color') which _are_ declared, and are used by
builtin-commit.c. So maybe we'd like to export it at some point, but it's
not declared now, and not used outside of that file, so 'static' it is in
this patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few remaining ones, but this fixes the trivial ones. It boils
down to two main issues that sparse complains about:
- warning: Using plain integer as NULL pointer
Sparse doesn't like you using '0' instead of 'NULL'. For various good
reasons, not the least of which is just the visual confusion. A NULL
pointer is not an integer, and that whole "0 works as NULL" is a
historical accident and not very pretty.
A few of these remain: zlib is a total mess, and Z_NULL is just a 0.
I didn't touch those.
- warning: symbol 'xyz' was not declared. Should it be static?
Sparse wants to see declarations for any functions you export. A lack
of a declaration tends to mean that you should either add one, or you
should mark the function 'static' to show that it's in file scope.
A few of these remain: I only did the ones that should obviously just
be made static.
That 'wt_status_submodule_summary' one is debatable. It has a few related
flags (like 'wt_status_use_color') which _are_ declared, and are used by
builtin-commit.c. So maybe we'd like to export it at some point, but it's
not declared now, and not used outside of that file, so 'static' it is in
this patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'ph/submodule-rebase'
* ph/submodule-rebase:
git-submodule: add support for --merge.
Conflicts:
Documentation/git-submodule.txt
git-submodule.sh
* ph/submodule-rebase:
git-submodule: add support for --merge.
Conflicts:
Documentation/git-submodule.txt
git-submodule.sh
Merge branch 'jc/cache-tree'
* jc/cache-tree:
Avoid "diff-index --cached" optimization under --find-copies-harder
Optimize "diff-index --cached" using cache-tree
t4007: modernize the style
cache-tree.c::cache_tree_find(): simplify internal API
write-tree --ignore-cache-tree
* jc/cache-tree:
Avoid "diff-index --cached" optimization under --find-copies-harder
Optimize "diff-index --cached" using cache-tree
t4007: modernize the style
cache-tree.c::cache_tree_find(): simplify internal API
write-tree --ignore-cache-tree
Merge branch 'mg/pushurl'
* mg/pushurl:
avoid NULL dereference on failed malloc
builtin-remote: Make "remote -v" display push urls
builtin-remote: Show push urls as well
technical/api-remote: Describe new struct remote member pushurl
t5516: Check pushurl config setting
Allow push and fetch urls to be different
* mg/pushurl:
avoid NULL dereference on failed malloc
builtin-remote: Make "remote -v" display push urls
builtin-remote: Show push urls as well
technical/api-remote: Describe new struct remote member pushurl
t5516: Check pushurl config setting
Allow push and fetch urls to be different
Merge branch 'mn/maint-iconv-autoconf'
* mn/maint-iconv-autoconf:
fix handling of iconv configuration options
* mn/maint-iconv-autoconf:
fix handling of iconv configuration options
Merge branch 'sb/pull-rebase'
* sb/pull-rebase:
parse-remote: remove unused functions
parse-remote: support default reflist in get_remote_merge_branch
parse-remote: function to get the tracking branch to be merge
* sb/pull-rebase:
parse-remote: remove unused functions
parse-remote: support default reflist in get_remote_merge_branch
parse-remote: function to get the tracking branch to be merge
Merge branch 'pb/send-email-cccmd-fix'
* pb/send-email-cccmd-fix:
Test cccmd in t9001-send-email.sh and fix some bugs
* pb/send-email-cccmd-fix:
Test cccmd in t9001-send-email.sh and fix some bugs
Merge branch 'pb/maint-1.6.2-userdiff-fix'
* pb/maint-1.6.2-userdiff-fix:
upload-archive: fix infinite loop on Cygwin
avoid exponential regex match for java and objc function names
* pb/maint-1.6.2-userdiff-fix:
upload-archive: fix infinite loop on Cygwin
avoid exponential regex match for java and objc function names
Merge branch 'sb/maint-1.6.0-add-config-fix'
* sb/maint-1.6.0-add-config-fix:
add: allow configurations to be overriden by command line
use xstrdup, not strdup in ll-merge.c
Conflicts:
builtin-add.c
* sb/maint-1.6.0-add-config-fix:
add: allow configurations to be overriden by command line
use xstrdup, not strdup in ll-merge.c
Conflicts:
builtin-add.c
Merge branch 'lt/maint-unsigned-left-shift'
* lt/maint-unsigned-left-shift:
Fix big left-shifts of unsigned char
* lt/maint-unsigned-left-shift:
Fix big left-shifts of unsigned char
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge git://git.kernel.org/pub/scm/gitk/gitk
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Allow diff view without context lines
gitk: Add another string to translation
gitk: Add option 'Simple history' to the options menu
gitk: Handle msysGit version during version comparisons
gitk: Make more options easily accessible from Edit View dialog
gitk: Check git version before using --textconv flag
gitk: Use --textconv to generate diff text
gitk: Update German translation.
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Allow diff view without context lines
gitk: Add another string to translation
gitk: Add option 'Simple history' to the options menu
gitk: Handle msysGit version during version comparisons
gitk: Make more options easily accessible from Edit View dialog
gitk: Check git version before using --textconv flag
gitk: Use --textconv to generate diff text
gitk: Update German translation.
add: allow configurations to be overriden by command line
Don't call git_config after parsing the command line options, otherwise
the config settings will override any settings made by the command line.
This can be seen by setting add.ignore_errors and then specifying
--no-ignore-errors when using git-add.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't call git_config after parsing the command line options, otherwise
the config settings will override any settings made by the command line.
This can be seen by setting add.ignore_errors and then specifying
--no-ignore-errors when using git-add.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
http.c: fix compiling with libcurl 7.9.2
import-tars: support symlinks
pull, rebase: simplify to use die()
* maint:
http.c: fix compiling with libcurl 7.9.2
import-tars: support symlinks
pull, rebase: simplify to use die()
Merge branch 'sb/parse-options-integer'
* sb/parse-options-integer:
parse-options: simplify usage argh handling
parse-options: make OPT_INTEGER's argh explicit
* sb/parse-options-integer:
parse-options: simplify usage argh handling
parse-options: make OPT_INTEGER's argh explicit
Merge branch 'ak/maint-for-each-ref-no-lookup'
* ak/maint-for-each-ref-no-lookup:
for-each-ref: Do not lookup objects when they will not be used
* ak/maint-for-each-ref-no-lookup:
for-each-ref: Do not lookup objects when they will not be used
Add -k option to cvsexportcommit to revert expanded CVS keywords in CVS working tree before applying commit patch
Depending on how your CVS->GIT conversion went you will have some
unexpanded CVS keywords in your GIT repo. If any of your git commits
touch these lines then the patch application will fail. This patch
addresses that by adding an option that will revert and expanded CVS
keywords to files in the working CVS directory that are affected by
the commit being applied.
Signed-off-by: Alex Bennée <alex@bennee.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on how your CVS->GIT conversion went you will have some
unexpanded CVS keywords in your GIT repo. If any of your git commits
touch these lines then the patch application will fail. This patch
addresses that by adding an option that will revert and expanded CVS
keywords to files in the working CVS directory that are affected by
the commit being applied.
Signed-off-by: Alex Bennée <alex@bennee.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http.c: fix compiling with libcurl 7.9.2
Change the minimimum required libcurl version for the http.sslKey option
to 7.9.3. Previously, preprocessor macros checked for >= 7.9.2, which
is incorrect because CURLOPT_SSLKEY was introduced in 7.9.3. This now
allows git to compile with libcurl 7.9.2.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the minimimum required libcurl version for the http.sslKey option
to 7.9.3. Previously, preprocessor macros checked for >= 7.9.2, which
is incorrect because CURLOPT_SSLKEY was introduced in 7.9.3. This now
allows git to compile with libcurl 7.9.2.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test cccmd in t9001-send-email.sh and fix some bugs
For another patch series I'm working on I needed some tests
for the cc-cmd feature of git-send-email.
This patch adds 3 tests for the feature and for the possibility
to specify --suppress-cc multiple times, and fixes two bugs.
The first bug is that the --suppress-cc option for `cccmd' was
misspelled as `ccmd' in the code. The second bug, which is
actually found only with my other series, is that the argument
to the cccmd is never quoted, so the cccmd would fail with
patch file names containing a space.
A third bug I fix (in the docs) is that the bodycc argument was
actually spelled ccbody in the documentation and bash completion.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Cc: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For another patch series I'm working on I needed some tests
for the cc-cmd feature of git-send-email.
This patch adds 3 tests for the feature and for the possibility
to specify --suppress-cc multiple times, and fixes two bugs.
The first bug is that the --suppress-cc option for `cccmd' was
misspelled as `ccmd' in the code. The second bug, which is
actually found only with my other series, is that the argument
to the cccmd is never quoted, so the cccmd would fail with
patch file names containing a space.
A third bug I fix (in the docs) is that the bodycc argument was
actually spelled ccbody in the documentation and bash completion.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Cc: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
import-tars: support symlinks
Without this patch, symbolic links are turned into empty files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch, symbolic links are turned into empty files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-archive: fix infinite loop on Cygwin
On Cygwin, poll() reports POLLIN even for file descriptors that have
reached their end. This caused git upload-archive to be stuck in an
infinite loop, as it only looked at the POLLIN flag.
In addition to POLLIN, check if read() returned 0, which indicates
end-of-file, and keep looping only as long as at least one of the file
descriptors has input. This lets the following command finish on its
own when run in a git repository on Cygwin, instead of it getting stuck
after printing all file names:
$ git archive -v --remote . HEAD >/dev/null
Reported-by: Bob Kagy <bobkagy@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Cygwin, poll() reports POLLIN even for file descriptors that have
reached their end. This caused git upload-archive to be stuck in an
infinite loop, as it only looked at the POLLIN flag.
In addition to POLLIN, check if read() returned 0, which indicates
end-of-file, and keep looping only as long as at least one of the file
descriptors has input. This lets the following command finish on its
own when run in a git repository on Cygwin, instead of it getting stuck
after printing all file names:
$ git archive -v --remote . HEAD >/dev/null
Reported-by: Bob Kagy <bobkagy@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
avoid exponential regex match for java and objc function names
In the old regex
^[ \t]*(([ \t]*[A-Za-z_][A-Za-z_0-9]*){2,}[ \t]*\([^;]*)$
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
you can backtrack arbitrarily from [A-Za-z_0-9]* into [A-Za-z_], thus
causing an exponential number of backtracks. Ironically it also causes
the regex not to work as intended; for example "catch" can match the
underlined part of the regex, the first repetition matching "c" and
the second matching "atch".
The replacement regex avoids this problem, because it makes sure that
at least a space/tab is eaten on each repetition. In other words,
a suffix of a repetition can never be a prefix of the next repetition.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the old regex
^[ \t]*(([ \t]*[A-Za-z_][A-Za-z_0-9]*){2,}[ \t]*\([^;]*)$
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
you can backtrack arbitrarily from [A-Za-z_0-9]* into [A-Za-z_], thus
causing an exponential number of backtracks. Ironically it also causes
the regex not to work as intended; for example "catch" can match the
underlined part of the regex, the first repetition matching "c" and
the second matching "atch".
The replacement regex avoids this problem, because it makes sure that
at least a space/tab is eaten on each repetition. In other words,
a suffix of a repetition can never be a prefix of the next repetition.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix big left-shifts of unsigned char
Shifting 'unsigned char' or 'unsigned short' left can result in sign
extension errors, since the C integer promotion rules means that the
unsigned char/short will get implicitly promoted to a signed 'int' due to
the shift (or due to other operations).
This normally doesn't matter, but if you shift things up sufficiently, it
will now set the sign bit in 'int', and a subsequent cast to a bigger type
(eg 'long' or 'unsigned long') will now sign-extend the value despite the
original expression being unsigned.
One example of this would be something like
unsigned long size;
unsigned char c;
size += c << 24;
where despite all the variables being unsigned, 'c << 24' ends up being a
signed entity, and will get sign-extended when then doing the addition in
an 'unsigned long' type.
Since git uses 'unsigned char' pointers extensively, we actually have this
bug in a couple of places.
I may have missed some, but this is the result of looking at
git grep '[^0-9 ][ ]*<<[ ][a-z]' -- '*.c' '*.h'
git grep '<<[ ]*24'
which catches at least the common byte cases (shifting variables by a
variable amount, and shifting by 24 bits).
I also grepped for just 'unsigned char' variables in general, and
converted the ones that most obviously ended up getting implicitly cast
immediately anyway (eg hash_name(), encode_85()).
In addition to just avoiding 'unsigned char', this patch also tries to use
a common idiom for the delta header size thing. We had three different
variations on it: "& 0x7fUL" in one place (getting the sign extension
right), and "& ~0x80" and "& 0x7f" in two other places (not getting it
right). Apart from making them all just avoid using "unsigned char" at
all, I also unified them to then use a simple "& 0x7f".
I considered making a sparse extension which warns about doing implicit
casts from unsigned types to signed types, but it gets rather complex very
quickly, so this is just a hack.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shifting 'unsigned char' or 'unsigned short' left can result in sign
extension errors, since the C integer promotion rules means that the
unsigned char/short will get implicitly promoted to a signed 'int' due to
the shift (or due to other operations).
This normally doesn't matter, but if you shift things up sufficiently, it
will now set the sign bit in 'int', and a subsequent cast to a bigger type
(eg 'long' or 'unsigned long') will now sign-extend the value despite the
original expression being unsigned.
One example of this would be something like
unsigned long size;
unsigned char c;
size += c << 24;
where despite all the variables being unsigned, 'c << 24' ends up being a
signed entity, and will get sign-extended when then doing the addition in
an 'unsigned long' type.
Since git uses 'unsigned char' pointers extensively, we actually have this
bug in a couple of places.
I may have missed some, but this is the result of looking at
git grep '[^0-9 ][ ]*<<[ ][a-z]' -- '*.c' '*.h'
git grep '<<[ ]*24'
which catches at least the common byte cases (shifting variables by a
variable amount, and shifting by 24 bits).
I also grepped for just 'unsigned char' variables in general, and
converted the ones that most obviously ended up getting implicitly cast
immediately anyway (eg hash_name(), encode_85()).
In addition to just avoiding 'unsigned char', this patch also tries to use
a common idiom for the delta header size thing. We had three different
variations on it: "& 0x7fUL" in one place (getting the sign extension
right), and "& ~0x80" and "& 0x7f" in two other places (not getting it
right). Apart from making them all just avoid using "unsigned char" at
all, I also unified them to then use a simple "& 0x7f".
I considered making a sparse extension which warns about doing implicit
casts from unsigned types to signed types, but it gets rather complex very
quickly, so this is just a hack.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pull, rebase: simplify to use die()
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
use xstrdup, not strdup in ll-merge.c
Otherwise, a fluky allocation failure would cause merge
configuration settings to be silently ignored.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, a fluky allocation failure would cause merge
configuration settings to be silently ignored.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
avoid NULL dereference on failed malloc
* builtin-remote.c (get_one_entry): Use xmalloc, not malloc.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* builtin-remote.c (get_one_entry): Use xmalloc, not malloc.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
git-rerere.txt: grammatical fixups and cleanups
* maint:
git-rerere.txt: grammatical fixups and cleanups
Merge branch 'maint-1.6.2' into maint
* maint-1.6.2:
git-rerere.txt: grammatical fixups and cleanups
* maint-1.6.2:
git-rerere.txt: grammatical fixups and cleanups
Merge branch 'maint-1.6.1' into maint-1.6.2
* maint-1.6.1:
git-rerere.txt: grammatical fixups and cleanups
* maint-1.6.1:
git-rerere.txt: grammatical fixups and cleanups
Merge branch 'maint-1.6.0' into maint-1.6.1
* maint-1.6.0:
git-rerere.txt: grammatical fixups and cleanups
http-push.c::remove_locks(): fix use after free
* maint-1.6.0:
git-rerere.txt: grammatical fixups and cleanups
http-push.c::remove_locks(): fix use after free
Merge branch 'mh/fix-send-email-threaded'
* mh/fix-send-email-threaded:
send-email: fix a typo in a comment
send-email: fix threaded mails without chain-reply-to
add a test for git-send-email for threaded mails without chain-reply-to
doc/send-email: clarify the behavior of --in-reply-to with --no-thread
send-email: fix non-threaded mails
add a test for git-send-email for non-threaded mails
* mh/fix-send-email-threaded:
send-email: fix a typo in a comment
send-email: fix threaded mails without chain-reply-to
add a test for git-send-email for threaded mails without chain-reply-to
doc/send-email: clarify the behavior of --in-reply-to with --no-thread
send-email: fix non-threaded mails
add a test for git-send-email for non-threaded mails
Merge branch 'rc/http-push'
* rc/http-push: (22 commits)
http*: add helper methods for fetching objects (loose)
http*: add helper methods for fetching packs
http: use new http API in fetch_index()
http*: add http_get_info_packs
http-push.c::fetch_symref(): use the new http API
http-push.c::remote_exists(): use the new http API
http.c::http_fetch_ref(): use the new http API
transport.c::get_refs_via_curl(): use the new http API
http.c: new functions for the http API
http: create function end_url_with_slash
http*: move common variables and macros to http.[ch]
transport.c::get_refs_via_curl(): do not leak refs_url
Don't expect verify_pack() callers to set pack_size
http-push: do not SEGV after fetching a bad pack idx file
http*: copy string returned by sha1_to_hex
http-walker: verify remote packs
http-push, http-walker: style fixes
t5550-http-fetch: test fetching of packed objects
http-push: fix missing "#ifdef USE_CURL_MULTI" around "is_running_queue"
http-push: send out fetch requests on queue
...
* rc/http-push: (22 commits)
http*: add helper methods for fetching objects (loose)
http*: add helper methods for fetching packs
http: use new http API in fetch_index()
http*: add http_get_info_packs
http-push.c::fetch_symref(): use the new http API
http-push.c::remote_exists(): use the new http API
http.c::http_fetch_ref(): use the new http API
transport.c::get_refs_via_curl(): use the new http API
http.c: new functions for the http API
http: create function end_url_with_slash
http*: move common variables and macros to http.[ch]
transport.c::get_refs_via_curl(): do not leak refs_url
Don't expect verify_pack() callers to set pack_size
http-push: do not SEGV after fetching a bad pack idx file
http*: copy string returned by sha1_to_hex
http-walker: verify remote packs
http-push, http-walker: style fixes
t5550-http-fetch: test fetching of packed objects
http-push: fix missing "#ifdef USE_CURL_MULTI" around "is_running_queue"
http-push: send out fetch requests on queue
...
Merge branch 'cc/bisect' (early part)
* 'cc/bisect' (early part):
t6030: test skipping away from an already skipped commit
bisect: when skipping, choose a commit away from a skipped commit
bisect: add parameters to "filter_skipped"
bisect: display first bad commit without forking a new process
bisect: drop unparse_commit() and use clear_commit_marks()
* 'cc/bisect' (early part):
t6030: test skipping away from an already skipped commit
bisect: when skipping, choose a commit away from a skipped commit
bisect: add parameters to "filter_skipped"
bisect: display first bad commit without forking a new process
bisect: drop unparse_commit() and use clear_commit_marks()
Merge branch 'rc/maint-http-local-slot-fix'
* rc/maint-http-local-slot-fix:
http*: cleanup slot->local after fclose
* rc/maint-http-local-slot-fix:
http*: cleanup slot->local after fclose
Merge branch 'sp/msysgit'
* sp/msysgit:
compat/ has subdirectories: do not omit them in 'make clean'
Fix typo in nedmalloc warning fix
MinGW: Teach Makefile to detect msysgit and apply specific settings
Fix warnings in nedmalloc when compiling with GCC 4.4.0
Add custom memory allocator to MinGW and MacOS builds
MinGW readdir reimplementation to support d_type
connect.c: Support PuTTY plink and TortoisePlink as SSH on Windows
git: browsing paths with spaces when using the start command
MinGW: fix warning about implicit declaration of _getch()
test-chmtime: work around Windows limitation
Work around a regression in Windows 7, causing erase_in_line() to crash sometimes
Quiet make: do not leave Windows behind
MinGW: GCC >= 4 does not need SNPRINTF_SIZE_CORR anymore
Conflicts:
Makefile
* sp/msysgit:
compat/ has subdirectories: do not omit them in 'make clean'
Fix typo in nedmalloc warning fix
MinGW: Teach Makefile to detect msysgit and apply specific settings
Fix warnings in nedmalloc when compiling with GCC 4.4.0
Add custom memory allocator to MinGW and MacOS builds
MinGW readdir reimplementation to support d_type
connect.c: Support PuTTY plink and TortoisePlink as SSH on Windows
git: browsing paths with spaces when using the start command
MinGW: fix warning about implicit declaration of _getch()
test-chmtime: work around Windows limitation
Work around a regression in Windows 7, causing erase_in_line() to crash sometimes
Quiet make: do not leave Windows behind
MinGW: GCC >= 4 does not need SNPRINTF_SIZE_CORR anymore
Conflicts:
Makefile
Merge branch 'cb/maint-no-double-merge'
* cb/maint-no-double-merge:
refuse to merge during a merge
* cb/maint-no-double-merge:
refuse to merge during a merge
Merge branch 'ph/submodule-rebase' (early part)
* 'ph/submodule-rebase' (early part):
Rename submodule.<name>.rebase to submodule.<name>.update
git-submodule: add support for --rebase.
Conflicts:
Documentation/git-submodule.txt
git-submodule.sh
* 'ph/submodule-rebase' (early part):
Rename submodule.<name>.rebase to submodule.<name>.update
git-submodule: add support for --rebase.
Conflicts:
Documentation/git-submodule.txt
git-submodule.sh
Merge branch 'bc/solaris'
* bc/solaris:
configure: test whether -lresolv is needed
Makefile: insert SANE_TOOL_PATH to PATH before /bin or /usr/bin
git-compat-util.h: avoid using c99 flex array feature with Sun compiler 5.8
Makefile: add section for SunOS 5.7
Makefile: introduce SANE_TOOL_PATH for prepending required elements to PATH
Makefile: define __sun__ on SunOS
git-compat-util.h: tweak the way _XOPEN_SOURCE is set on Solaris
On Solaris choose the OLD_ICONV iconv() declaration based on the UNIX spec
Makefile: add NEEDS_RESOLV to optionally add -lresolv to compile arguments
Makefile: use /usr/ucb/install on SunOS platforms rather than ginstall
Conflicts:
Makefile
* bc/solaris:
configure: test whether -lresolv is needed
Makefile: insert SANE_TOOL_PATH to PATH before /bin or /usr/bin
git-compat-util.h: avoid using c99 flex array feature with Sun compiler 5.8
Makefile: add section for SunOS 5.7
Makefile: introduce SANE_TOOL_PATH for prepending required elements to PATH
Makefile: define __sun__ on SunOS
git-compat-util.h: tweak the way _XOPEN_SOURCE is set on Solaris
On Solaris choose the OLD_ICONV iconv() declaration based on the UNIX spec
Makefile: add NEEDS_RESOLV to optionally add -lresolv to compile arguments
Makefile: use /usr/ucb/install on SunOS platforms rather than ginstall
Conflicts:
Makefile
Merge branch 'cb/match_refs_internal_tail'
* cb/match_refs_internal_tail:
match_refs: search ref list tail internally
* cb/match_refs_internal_tail:
match_refs: search ref list tail internally
Merge branch 'nw/maint-cvsexportcommit'
* nw/maint-cvsexportcommit:
git-cvsexportcommit can't commit files which have been removed from CVS
* nw/maint-cvsexportcommit:
git-cvsexportcommit can't commit files which have been removed from CVS
Merge branch 'da/araxis-mergetool'
* da/araxis-mergetool:
mergetool--lib: add support for araxis merge
* da/araxis-mergetool:
mergetool--lib: add support for araxis merge
git-rerere.txt: grammatical fixups and cleanups
Rewrite the gc section using unresolved and resolved instead of "not
recorded". Add plurals and missing articles. Make some sentences have
consistent tense. Try and be more active by removing "that" and
simplifying sentences.
The terms "hand-resolve" and "hand resolve" were used, so just use "hand
resolve" to be more consistent.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite the gc section using unresolved and resolved instead of "not
recorded". Add plurals and missing articles. Make some sentences have
consistent tense. Try and be more active by removing "that" and
simplifying sentences.
The terms "hand-resolve" and "hand resolve" were used, so just use "hand
resolve" to be more consistent.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-remote: Make "remote -v" display push urls
Currently, "remote -v" simply lists all urls so that one has to remember
that only the first one is used for fetches, and all are used for
pushes.
Change this so that the role of an url is displayed in parentheses, and
also display push urls.
Example with "one" having one url, "two" two urls, "three" one url and
one pushurl:
one hostone.com:/somepath/repoone.git (fetch)
one hostone.com:/somepath/repoone.git (push)
three http://hostthree.com/otherpath/repothree.git (fetch)
three hostthree.com:/pathforpushes/repothree.git (push)
two hosttwo.com:/somepath/repotwo.git (fetch)
two hosttwo.com:/somepath/repotwo.git (push)
two hosttwobackup.com:/somewheresafe/repotwo.git (push)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, "remote -v" simply lists all urls so that one has to remember
that only the first one is used for fetches, and all are used for
pushes.
Change this so that the role of an url is displayed in parentheses, and
also display push urls.
Example with "one" having one url, "two" two urls, "three" one url and
one pushurl:
one hostone.com:/somepath/repoone.git (fetch)
one hostone.com:/somepath/repoone.git (push)
three http://hostthree.com/otherpath/repothree.git (fetch)
three hostthree.com:/pathforpushes/repothree.git (push)
two hosttwo.com:/somepath/repotwo.git (fetch)
two hosttwo.com:/somepath/repotwo.git (push)
two hosttwobackup.com:/somewheresafe/repotwo.git (push)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-remote: Show push urls as well
Teach builtin remote to show push urls also when asked to
"show" a specific remote.
This improves upon the standard display mode: multiple specified "url"s
mean that the first one is for fetching, all are used for pushing. We
make this clearer now by displaying the first one prefixed with "Fetch
URL", and all "url"s (or, if present, all "pushurl"s) prefixed with
"Push URL".
Example with "one" having one url, "two" two urls, "three" one url and
one pushurl (URL part only):
* remote one
Fetch URL: hostone.com:/somepath/repoone.git
Push URL: hostone.com:/somepath/repoone.git
* remote two
Fetch URL: hosttwo.com:/somepath/repotwo.git
Push URL: hosttwo.com:/somepath/repotwo.git
Push URL: hosttwobackup.com:/somewheresafe/repotwo.git
* remote three
Fetch URL: http://hostthree.com/otherpath/repothree.git
Push URL: hostthree.com:/pathforpushes/repothree.git
Also, adjust t5505 accordingly and make it test for the new output.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach builtin remote to show push urls also when asked to
"show" a specific remote.
This improves upon the standard display mode: multiple specified "url"s
mean that the first one is for fetching, all are used for pushing. We
make this clearer now by displaying the first one prefixed with "Fetch
URL", and all "url"s (or, if present, all "pushurl"s) prefixed with
"Push URL".
Example with "one" having one url, "two" two urls, "three" one url and
one pushurl (URL part only):
* remote one
Fetch URL: hostone.com:/somepath/repoone.git
Push URL: hostone.com:/somepath/repoone.git
* remote two
Fetch URL: hosttwo.com:/somepath/repotwo.git
Push URL: hosttwo.com:/somepath/repotwo.git
Push URL: hosttwobackup.com:/somewheresafe/repotwo.git
* remote three
Fetch URL: http://hostthree.com/otherpath/repothree.git
Push URL: hostthree.com:/pathforpushes/repothree.git
Also, adjust t5505 accordingly and make it test for the new output.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'mh/maint-fix-send-email-threaded' into mh/fix-send-email-threaded
* mh/maint-fix-send-email-threaded:
doc/send-email: clarify the behavior of --in-reply-to with --no-thread
send-email: fix non-threaded mails
add a test for git-send-email for non-threaded mails
Conflicts:
git-send-email.perl
t/t9001-send-email.sh
* mh/maint-fix-send-email-threaded:
doc/send-email: clarify the behavior of --in-reply-to with --no-thread
send-email: fix non-threaded mails
add a test for git-send-email for non-threaded mails
Conflicts:
git-send-email.perl
t/t9001-send-email.sh
send-email: fix a typo in a comment
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: fix threaded mails without chain-reply-to
An earlier commit 15da108 ("send-email: 'References:' should only
reference what is sent", 2009-04-13) broke logic to set up threading
information for the next message by rewriting "!" to "not" without
understanding the precedence rules of the language.
Namely,
! defined $reply_to || length($reply_to) == 0
was changed to
not defined $reply_to || length($reply_to) == 0
which is
not (defined $reply_to || length($reply_to) == 0)
and different from what was intended, which is
(not defined $reply_to) || (length($reply_to) == 0)
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit 15da108 ("send-email: 'References:' should only
reference what is sent", 2009-04-13) broke logic to set up threading
information for the next message by rewriting "!" to "not" without
understanding the precedence rules of the language.
Namely,
! defined $reply_to || length($reply_to) == 0
was changed to
not defined $reply_to || length($reply_to) == 0
which is
not (defined $reply_to || length($reply_to) == 0)
and different from what was intended, which is
(not defined $reply_to) || (length($reply_to) == 0)
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
add a test for git-send-email for threaded mails without chain-reply-to
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc/send-email: clarify the behavior of --in-reply-to with --no-thread
Also remove the argument from --[no-]chain-reply-to.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also remove the argument from --[no-]chain-reply-to.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: fix non-threaded mails
After commit 3e0c4ff (send-email: respect in-reply-to regardless of
threading, 2009-03-01) the variable $thread was only used for prompting
for an "In-Reply-To", but not for controlling whether the "In-Reply-To"
and "References" fields should be written into the email.
Thus these fields were always used beginning with the second mail and it
was not possible to produce non-threaded mails anymore.
However, a later commit 15da108 ("send-email: 'References:' should only
reference what is sent", 2009-04-13) introduced a regression with the
side effect to make non-threaded mails possible again, but only when
--no-chain-reply-to was used.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After commit 3e0c4ff (send-email: respect in-reply-to regardless of
threading, 2009-03-01) the variable $thread was only used for prompting
for an "In-Reply-To", but not for controlling whether the "In-Reply-To"
and "References" fields should be written into the email.
Thus these fields were always used beginning with the second mail and it
was not possible to produce non-threaded mails anymore.
However, a later commit 15da108 ("send-email: 'References:' should only
reference what is sent", 2009-04-13) introduced a regression with the
side effect to make non-threaded mails possible again, but only when
--no-chain-reply-to was used.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
add a test for git-send-email for non-threaded mails
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
Documentation: git-send-mail can take rev-list arg to drive format-patch
rebase--interactive: remote stray closing parenthesis
* maint:
Documentation: git-send-mail can take rev-list arg to drive format-patch
rebase--interactive: remote stray closing parenthesis
Documentation: git-send-mail can take rev-list arg to drive format-patch
The git-send-email docs do not mention except in the usage lines
the combined patch formatting/sending ability of git-send-email.
This patch expands on the possible arguments to git-send-email
and explains the meaning of the rev-list argument.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-send-email docs do not mention except in the usage lines
the combined patch formatting/sending ability of git-send-email.
This patch expands on the possible arguments to git-send-email
and explains the meaning of the rev-list argument.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse-remote: remove unused functions
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse-remote: support default reflist in get_remote_merge_branch
Expand get_remote_merge_branch to compute the tracking branch to merge
when called without arguments (or only the remote name). This allows
"git pull --rebase" without arguments (default upstream branch) to
work with a rebased upstream. With explicit arguments it already worked.
Also add a test to check for this case.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expand get_remote_merge_branch to compute the tracking branch to merge
when called without arguments (or only the remote name). This allows
"git pull --rebase" without arguments (default upstream branch) to
work with a rebased upstream. With explicit arguments it already worked.
Also add a test to check for this case.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse-remote: function to get the tracking branch to be merge
The only user of get_remote_refs_for_fetch was "git pull --rebase" and
it only wanted the tracking branch to be merge. So, add a simple
function (get_remote_merge_branch) with this new meaning.
No behavior changes. The new function behaves like the old code in
"git pull --rebase". In particular, it only works with the default
refspec mapping and with remote branches, not tags.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only user of get_remote_refs_for_fetch was "git pull --rebase" and
it only wanted the tracking branch to be merge. So, add a simple
function (get_remote_merge_branch) with this new meaning.
No behavior changes. The new function behaves like the old code in
"git pull --rebase". In particular, it only works with the default
refspec mapping and with remote branches, not tags.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
compat/ has subdirectories: do not omit them in 'make clean'
[1. text/plain]
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[1. text/plain]
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix typo in nedmalloc warning fix
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'uk/maint-1.5.3-rebase-i-reflog' into maint
* uk/maint-1.5.3-rebase-i-reflog:
rebase--interactive: remote stray closing parenthesis
Conflicts:
git-rebase--interactive.sh
* uk/maint-1.5.3-rebase-i-reflog:
rebase--interactive: remote stray closing parenthesis
Conflicts:
git-rebase--interactive.sh
rebase--interactive: remote stray closing parenthesis
it was introduced in 68a163c9b483ae352fcfee8c4505d113213daa73
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Jöhännës "Dschö" Schindëlin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
it was introduced in 68a163c9b483ae352fcfee8c4505d113213daa73
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Jöhännës "Dschö" Schindëlin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse-options: add parse_options_check to validate option specs.
It only searches for now for the dreaded LASTARG_DEFAULT | OPTARG
combination, but can be extended to check for any other forbidden
combination.
Options are checked each time we call parse_options_start.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It only searches for now for the dreaded LASTARG_DEFAULT | OPTARG
combination, but can be extended to check for any other forbidden
combination.
Options are checked each time we call parse_options_start.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
configure: test whether -lresolv is needed
Check if -lresolv is needed for hstrerror; set NEEDS_RESOLV
accordingly, and substitute in config.mak.in.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if -lresolv is needed for hstrerror; set NEEDS_RESOLV
accordingly, and substitute in config.mak.in.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: insert SANE_TOOL_PATH to PATH before /bin or /usr/bin
In an earlier patch, we introduced SANE_TOOL_PATH that is prepended to
user's PATH. This had an unintended consequence of overriding user's
private binary directory that typically comes earlier in the PATH to holds
even saner commands than whatever comes with the system.
For example, a user may have ~/bin that is early in the path and contains
a shell script "vi" that launches system's /bin/vi with specific options.
Prepending SANE_TOOL_PATH to the PATH that happens to have "vi" in it
defeats such customization.
This fixes the issue by inserting SANE_TOOL_PATH just before /bin or
/usr/bin appears on the PATH.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an earlier patch, we introduced SANE_TOOL_PATH that is prepended to
user's PATH. This had an unintended consequence of overriding user's
private binary directory that typically comes earlier in the PATH to holds
even saner commands than whatever comes with the system.
For example, a user may have ~/bin that is early in the path and contains
a shell script "vi" that launches system's /bin/vi with specific options.
Prepending SANE_TOOL_PATH to the PATH that happens to have "vi" in it
defeats such customization.
This fixes the issue by inserting SANE_TOOL_PATH just before /bin or
/usr/bin appears on the PATH.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-repack.txt: Clarify implications of -a for dumb protocols
The current text makes some users feel uneasy, worrying whether
'-a' could lead to corrupt repositories. Clarify that '-a'
may lead to performance issues only for dumb protocols.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current text makes some users feel uneasy, worrying whether
'-a' could lead to corrupt repositories. Clarify that '-a'
may lead to performance issues only for dumb protocols.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
technical/api-remote: Describe new struct remote member pushurl
...and pushurl_nr
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
...and pushurl_nr
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5516: Check pushurl config setting
Check whether the new remote.${remotename}.pushurl setting is obeyed
and whether it overrides remote.${remotename}.url.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check whether the new remote.${remotename}.pushurl setting is obeyed
and whether it overrides remote.${remotename}.url.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow push and fetch urls to be different
This introduces a config setting remote.$remotename.pushurl which is
used for pushes only. If absent remote.$remotename.url is used for
pushes and fetches as before.
This is useful, for example, in order to do passwordless fetches
(remote update) over the git transport but pushes over ssh.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a config setting remote.$remotename.pushurl which is
used for pushes only. If absent remote.$remotename.url is used for
pushes and fetches as before.
This is useful, for example, in order to do passwordless fetches
(remote update) over the git transport but pushes over ssh.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
diff.c: plug a memory leak in an error path
fetch-pack: close output channel after sideband demultiplexer terminates
builtin-remote: Make "remote show" display all urls
* maint:
diff.c: plug a memory leak in an error path
fetch-pack: close output channel after sideband demultiplexer terminates
builtin-remote: Make "remote show" display all urls
bash: add support for 'git stash pop --index' option
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: mention 'git stash pop --index' option explicitly
'git stash pop' supports the '--index' option since its initial
implementation (bd56ff54, git-stash: add new 'pop' subcommand,
2008-02-22), but its documentation does not mention it explicitly.
Moreover, both the usage shown by 'git stash -h' and the synopsis
section in the man page imply that 'git stash pop' does not have an
'--index' option.
First, this patch corrects the usage and the synopsis section.
Second, the patch moves the description of the '--index' option to the
'git stash pop' section in the documentation, and refers to it from
the 'git stash apply' section. This way it follows the intentions of
commit d1836637 (Documentation: teach stash/pop workflow instead of
stash/apply, 2009-05-28), as all 'git stash pop'-related documentation
will be in one place without references to 'git stash apply'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git stash pop' supports the '--index' option since its initial
implementation (bd56ff54, git-stash: add new 'pop' subcommand,
2008-02-22), but its documentation does not mention it explicitly.
Moreover, both the usage shown by 'git stash -h' and the synopsis
section in the man page imply that 'git stash pop' does not have an
'--index' option.
First, this patch corrects the usage and the synopsis section.
Second, the patch moves the description of the '--index' option to the
'git stash pop' section in the documentation, and refers to it from
the 'git stash apply' section. This way it follows the intentions of
commit d1836637 (Documentation: teach stash/pop workflow instead of
stash/apply, 2009-05-28), as all 'git stash pop'-related documentation
will be in one place without references to 'git stash apply'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify some 'fprintf(stderr); return -1;' by using 'return error()'
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify some instances of run_command() by using run_command_v_opt().
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
show-branch: don't use LASTARG_DEFAULT with OPTARG
5734365 (show-branch: migrate to parse-options API 2009-05-21)
incorrectly set the --more option's flags to be
PARSE_OPT_LASTARG_DEFAULT and PARSE_OPT_OPTARG. These two flags
shouldn't be used together. An option taking a default should just set
the default value desired and parse options will take care of the rest.
Update the header comment to better convey this information.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
5734365 (show-branch: migrate to parse-options API 2009-05-21)
incorrectly set the --more option's flags to be
PARSE_OPT_LASTARG_DEFAULT and PARSE_OPT_OPTARG. These two flags
shouldn't be used together. An option taking a default should just set
the default value desired and parse options will take care of the rest.
Update the header comment to better convey this information.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: use UTF-8 rather than utf-8 for consistency
The rest of the git source has been converted to use upper-case character
encoding names to assist older platforms. The charset attribute of MIME
is defined to be case-insensitive, but older platforms may still have an
easier time dealing with upper-case rather than lower-case. So do so for
send-email too.
Update t9001 to handle the changes.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rest of the git source has been converted to use upper-case character
encoding names to assist older platforms. The charset attribute of MIME
is defined to be case-insensitive, but older platforms may still have an
easier time dealing with upper-case rather than lower-case. So do so for
send-email too.
Update t9001 to handle the changes.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-send-email.perl: improve detection of MIME encoded-words
According to rfc2047, an encoded word has the following form:
encoded-word = "=?" charset "?" encoding "?" encoded-text "?="
charset = token
encoding = token
token = <Any CHAR except SPACE, CTLs, and especials>
especials = "(" / ")" / "<" / ">" / "@" / "," / ";" / ":" / "
<"> / "/" / "[" / "]" / "?" / "." / "="
encoded-text = <Any printable ASCII character other than "?"
or SPACE>
And rfc822 defines CHARs and CTLs as:
CHAR = <any ASCII character> ; ( 0-177, 0.-127.)
CTL = <any ASCII control ; ( 0- 37, 0.- 31.)
character and DEL> ; ( 177, 127.)
The original code only detected rfc2047 encoded strings when the charset
was UTF-8. This patch generalizes the matching expression and breaks the
check for an rfc2047 encoded string into its own function. There's no real
functional change, since any properly rfc2047 encoded string would have
fallen through the remaining 'if' statements and been returned unchanged.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to rfc2047, an encoded word has the following form:
encoded-word = "=?" charset "?" encoding "?" encoded-text "?="
charset = token
encoding = token
token = <Any CHAR except SPACE, CTLs, and especials>
especials = "(" / ")" / "<" / ">" / "@" / "," / ";" / ":" / "
<"> / "/" / "[" / "]" / "?" / "." / "="
encoded-text = <Any printable ASCII character other than "?"
or SPACE>
And rfc822 defines CHARs and CTLs as:
CHAR = <any ASCII character> ; ( 0-177, 0.-127.)
CTL = <any ASCII control ; ( 0- 37, 0.- 31.)
character and DEL> ; ( 177, 127.)
The original code only detected rfc2047 encoded strings when the charset
was UTF-8. This patch generalizes the matching expression and breaks the
check for an rfc2047 encoded string into its own function. There's no real
functional change, since any properly rfc2047 encoded string would have
fallen through the remaining 'if' statements and been returned unchanged.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.c: plug a memory leak in an error path
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>