Add API access to shortlog
Shortlog is gives a pretty simple API for cases where you're already
identifying all of the individual commits. Make this available to
other code instead of requiring them to use the revision API and
command line.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Shortlog is gives a pretty simple API for cases where you're already
identifying all of the individual commits. Make this available to
other code instead of requiring them to use the revision API and
command line.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
t4014: Replace sed's non-standard 'Q' by standard 'q'
t4014 test used GNU extension 'Q' in its sed scripts, but the
uses can safely be replaced with 'q'. Among other platforms,
sed on Mac OS X 10.4 does not accept the former.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4014 test used GNU extension 'Q' in its sed scripts, but the
uses can safely be replaced with 'q'. Among other platforms,
sed on Mac OS X 10.4 does not accept the former.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support a --cc=<email> option in format-patch
When you have particular reviewers you want to sent particular series
to, it's nice to be able to generate the whole series with them as
additional recipients, without configuring them into your general
headers or adding them by hand afterwards.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have particular reviewers you want to sent particular series
to, it's nice to be able to generate the whole series with them as
additional recipients, without configuring them into your general
headers or adding them by hand afterwards.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Combine To: and Cc: headers
RFC 2822 only permits a single To: header and a single Cc: header, so
we need to turn multiple values of each of these into a list. This
will be particularly significant with a command-line option to add Cc:
headers, where the user can't make sure to configure valid header sets
in any easy way.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
RFC 2822 only permits a single To: header and a single Cc: header, so
we need to turn multiple values of each of these into a list. This
will be particularly significant with a command-line option to add Cc:
headers, where the user can't make sure to configure valid header sets
in any easy way.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix format.headers not ending with a newline
Now each value of format.headers will always be treated as a single
valid header, and newlines will be inserted between them as needed.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now each value of format.headers will always be treated as a single
valid header, and newlines will be inserted between them as needed.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for extra headers in format-patch
Presently, it works with each header ending with a newline, but not
without the newlines.
Also add a test to see that multiple "To:" headers get combined.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Presently, it works with each header ending with a newline, but not
without the newlines.
Also add a test to see that multiple "To:" headers get combined.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --cover-letter option to format-patch
If --cover-letter is provided, generate a cover letter message before
the patches, numbered 0.
Original patch thanks to Johannes Schindelin
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --cover-letter is provided, generate a cover letter message before
the patches, numbered 0.
Original patch thanks to Johannes Schindelin
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Export some email and pretty-printing functions
These will be used for generating the cover letter in addition to the
patch emails.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These will be used for generating the cover letter in addition to the
patch emails.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve message-id generation flow control for format-patch
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add more tests for format-patch
Tests -o, and an excessively long subject, and --thread, with and
without --in-reply-to=
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests -o, and an excessively long subject, and --thread, with and
without --in-reply-to=
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sync with 1.5.4.2 and start 1.5.5 Release Notes
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
GIT 1.5.4.2
* maint:
GIT 1.5.4.2
GIT 1.5.4.2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'bd/qsort'
* bd/qsort:
compat: Add simplified merge sort implementation from glibc
* bd/qsort:
compat: Add simplified merge sort implementation from glibc
Merge branch 'sp/safecrlf'
* sp/safecrlf:
safecrlf: Add mechanism to warn about irreversible crlf conversions
* sp/safecrlf:
safecrlf: Add mechanism to warn about irreversible crlf conversions
Merge branch 'cc/browser'
* cc/browser:
Documentation: add 'git-web--browse.txt' and simplify other docs.
git-web--browse: fix misplaced quote in init_browser_path()
web--browse: Add a few quotes in 'init_browser_path'.
Documentation: instaweb: add 'git-web--browse' information.
Adjust .gitignore for 5884f1(Rename 'git-help--browse.sh'...)
git-web--browse: do not start the browser with nohup
instaweb: use 'git-web--browse' to launch browser.
Rename 'git-help--browse.sh' to 'git-web--browse.sh'.
help--browse: add '--config' option to check a config option for a browser.
help: make 'git-help--browse' usable outside 'git-help'.
Conflicts:
git-web--browse.sh
* cc/browser:
Documentation: add 'git-web--browse.txt' and simplify other docs.
git-web--browse: fix misplaced quote in init_browser_path()
web--browse: Add a few quotes in 'init_browser_path'.
Documentation: instaweb: add 'git-web--browse' information.
Adjust .gitignore for 5884f1(Rename 'git-help--browse.sh'...)
git-web--browse: do not start the browser with nohup
instaweb: use 'git-web--browse' to launch browser.
Rename 'git-help--browse.sh' to 'git-web--browse.sh'.
help--browse: add '--config' option to check a config option for a browser.
help: make 'git-help--browse' usable outside 'git-help'.
Conflicts:
git-web--browse.sh
Merge branch 'jc/gitignore-ends-with-slash'
* jc/gitignore-ends-with-slash:
gitignore: lazily find dtype
gitignore(5): Allow "foo/" in ignore list to match directory "foo"
* jc/gitignore-ends-with-slash:
gitignore: lazily find dtype
gitignore(5): Allow "foo/" in ignore list to match directory "foo"
Merge branch 'pb/prepare-commit-msg'
* pb/prepare-commit-msg:
git-commit: add a prepare-commit-msg hook
git-commit: Refactor creation of log message.
git-commit: set GIT_EDITOR=: if editor will not be launched
git-commit: support variable number of hook arguments
* pb/prepare-commit-msg:
git-commit: add a prepare-commit-msg hook
git-commit: Refactor creation of log message.
git-commit: set GIT_EDITOR=: if editor will not be launched
git-commit: support variable number of hook arguments
Merge branch 'jk/noetcconfig'
* jk/noetcconfig:
fix config reading in tests
allow suppressing of global and system config
Conflicts:
cache.h
* jk/noetcconfig:
fix config reading in tests
allow suppressing of global and system config
Conflicts:
cache.h
Merge branch 'jc/submittingpatches'
* jc/submittingpatches:
Documentation/SubmittingPatches - a suggested patch flow
Documentation/SubmittingPatches: What's Acked-by and Tested-by?
Documentation/SubmittingPatches: discuss first then submit
Documentation/SubmittingPatches: Instruct how to use [PATCH] Subject header
* jc/submittingpatches:
Documentation/SubmittingPatches - a suggested patch flow
Documentation/SubmittingPatches: What's Acked-by and Tested-by?
Documentation/SubmittingPatches: discuss first then submit
Documentation/SubmittingPatches: Instruct how to use [PATCH] Subject header
Merge git://repo.or.cz/git-gui
* git://repo.or.cz/git-gui:
git-gui: Correct size of dictionary name widget in options dialog
git-gui: Paper bag fix bad string length call in spellchecker
* git://repo.or.cz/git-gui:
git-gui: Correct size of dictionary name widget in options dialog
git-gui: Paper bag fix bad string length call in spellchecker
Merge git://git.kernel.org/pub/scm/gitk/gitk
* git://git.kernel.org/pub/scm/gitk/gitk:
[PATCH] gitk: Heed the lines of context in merge commits
* git://git.kernel.org/pub/scm/gitk/gitk:
[PATCH] gitk: Heed the lines of context in merge commits
Merge branch 'maint'
* maint:
Documentation/git-reset: Add an example of resetting selected paths
Documentation/git-reset: don't mention --mixed for selected-paths reset
Documentation/git-reset:
* maint:
Documentation/git-reset: Add an example of resetting selected paths
Documentation/git-reset: don't mention --mixed for selected-paths reset
Documentation/git-reset:
Documentation/SubmittingPatches - a suggested patch flow
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/git-reset: Add an example of resetting selected paths
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/git-reset: don't mention --mixed for selected-paths reset
The option is accepted, but that is the only form selected-paths
variant of the reset command takes, so there is no point mentioning it.
And while we're at it, use the dashless git call.
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option is accepted, but that is the only form selected-paths
variant of the reset command takes, so there is no point mentioning it.
And while we're at it, use the dashless git call.
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/git-reset:
Since 3368d11 (Remove unnecessary git-rm --cached reference from
status output), the status output marks the "Added but not yet
committed" section as "Changes to be committed".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 3368d11 (Remove unnecessary git-rm --cached reference from
status output), the status output marks the "Added but not yet
committed" section as "Changes to be committed".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update fast-import documentation to discuss crash reports
Recent versions of fast-import will now dump information out upon
crashing, making it possible for the frontend developer to review
some state information and possibly restart the import from the
point where it crashed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent versions of fast-import will now dump information out upon
crashing, making it possible for the frontend developer to review
some state information and possibly restart the import from the
point where it crashed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finish current packfile during fast-import crash handler
If fast-import is in the middle of crashing due to a protocol error
or something like that then it can be very useful to have the mark
table and all objects up until that point be available for a new
import to resume from.
Currently we just close the active packfile, unkeep all of our
newly created packfiles (so they can be deleted), and dump the
marks table to a temporary file.
We don't attempt to update the refs/tags that the process has in
memory as much of that data can be found in the crash report and I'm
not sure it would be the right thing to do under every type of crash.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If fast-import is in the middle of crashing due to a protocol error
or something like that then it can be very useful to have the mark
table and all objects up until that point be available for a new
import to resume from.
Currently we just close the active packfile, unkeep all of our
newly created packfiles (so they can be deleted), and dump the
marks table to a temporary file.
We don't attempt to update the refs/tags that the process has in
memory as much of that data can be found in the crash report and I'm
not sure it would be the right thing to do under every type of crash.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include the fast-import marks table in crash reports
If fast-import was not run with --export-marks but we are crashing
the frontend application developer may still benefit from having
that information available to them. We now include the marks table
as part of the crash report if --export-marks was not supplied on
the command line.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If fast-import was not run with --export-marks but we are crashing
the frontend application developer may still benefit from having
that information available to them. We now include the marks table
as part of the crash report if --export-marks was not supplied on
the command line.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include annotated tags in fast-import crash reports
If annotated tags were created they exist in a different namespace
within the fast-import process' internal memory tables so we did
not export them in the inactive branch table. Now they are written
out after the branches, in the order that they were defined by the
frontend process.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If annotated tags were created they exist in a different namespace
within the fast-import process' internal memory tables so we did
not export them in the inactive branch table. Now they are written
out after the branches, in the order that they were defined by the
frontend process.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: add 'git-web--browse.txt' and simplify other docs.
'git-help.txt' and 'git-instaweb.txt' contained duplicated
information about 'git-web--browse'.
This patch puts this information where it belongs.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git-help.txt' and 'git-instaweb.txt' contained duplicated
information about 'git-web--browse'.
This patch puts this information where it belongs.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-help--browse: improve browser support under OS X
/usr/bin/open <document> is used under OS X to open a document as if the
user had double-clicked on the file's icon (i.e. HTML files are opened
w/the user's default browser).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
/usr/bin/open <document> is used under OS X to open a document as if the
user had double-clicked on the file's icon (i.e. HTML files are opened
w/the user's default browser).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint:
commit: discard index after setting up partial commit
filter-branch: handle filenames that need quoting
diff: Fix miscounting of --check output
hg-to-git: fix parent analysis
mailinfo: feed only one line to handle_filter() for QP input
diff.c: add "const" qualifier to "char *cmd" member of "struct ll_diff_driver"
Add "const" qualifier to "char *excludes_file".
Add "const" qualifier to "char *editor_program".
Add "const" qualifier to "char *pager_program".
config: add 'git_config_string' to refactor string config variables.
diff.c: remove useless check for value != NULL
fast-import: check return value from unpack_entry()
Validate nicknames of remote branches to prohibit confusing ones
diff.c: replace a 'strdup' with 'xstrdup'.
diff.c: fixup garding of config parser from value=NULL
* maint:
commit: discard index after setting up partial commit
filter-branch: handle filenames that need quoting
diff: Fix miscounting of --check output
hg-to-git: fix parent analysis
mailinfo: feed only one line to handle_filter() for QP input
diff.c: add "const" qualifier to "char *cmd" member of "struct ll_diff_driver"
Add "const" qualifier to "char *excludes_file".
Add "const" qualifier to "char *editor_program".
Add "const" qualifier to "char *pager_program".
config: add 'git_config_string' to refactor string config variables.
diff.c: remove useless check for value != NULL
fast-import: check return value from unpack_entry()
Validate nicknames of remote branches to prohibit confusing ones
diff.c: replace a 'strdup' with 'xstrdup'.
diff.c: fixup garding of config parser from value=NULL
commit: discard index after setting up partial commit
There may still be some entries from the original index that
should be discarded before we show the status. In
particular, if a file was added in the index but not
included in the partial commit, it would still show up in
the status listing as staged for commit.
Ultimately the correct fix is to keep the two states in
separate index_state variables. Then we can avoid having
to reload the cache from the temporary file altogether, and
just point wt_status_print at the correct index.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There may still be some entries from the original index that
should be discarded before we show the status. In
particular, if a file was added in the index but not
included in the partial commit, it would still show up in
the status listing as staged for commit.
Ultimately the correct fix is to keep the two states in
separate index_state variables. Then we can avoid having
to reload the cache from the temporary file altogether, and
just point wt_status_print at the correct index.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
filter-branch: handle filenames that need quoting
The command used a very old fashioned construct to extract
filenames out of diff-index and ended up corrupting the output.
We can simply use --name-only and pipe into --stdin mode of
update-index. It's been like that for the past 2 years or so
since a94d994 (update-index: work with c-quoted name).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command used a very old fashioned construct to extract
filenames out of diff-index and ended up corrupting the output.
We can simply use --name-only and pipe into --stdin mode of
update-index. It's been like that for the past 2 years or so
since a94d994 (update-index: work with c-quoted name).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff: Fix miscounting of --check output
c1795bb (Unify whitespace checking) incorrectly made the
checking function return without incrementing the line numbers
when there is no whitespace problem is found on a '+' line.
This resurrects the earlier behaviour.
Noticed and reported by Jay Soffian. The test script was stolen
from Jay's independent fix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c1795bb (Unify whitespace checking) incorrectly made the
checking function return without incrementing the line numbers
when there is no whitespace problem is found on a '+' line.
This resurrects the earlier behaviour.
Noticed and reported by Jay Soffian. The test script was stolen
from Jay's independent fix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
hg-to-git: fix parent analysis
Fix a bug in the hg-to-git convertor introduced by commit
1bc7c13af9f936aa80893100120b542338a10bf4: when searching the changeset
parents, 'hg log' returns an extra space at the end of the line, which
confuses the .split(' ') based tokenizer:
Traceback (most recent call last):
File "hg-to-git.py", line 123, in <module>
hgchildren[mparent] += ( str(cset), )
KeyError: ''
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in the hg-to-git convertor introduced by commit
1bc7c13af9f936aa80893100120b542338a10bf4: when searching the changeset
parents, 'hg log' returns an extra space at the end of the line, which
confuses the .split(' ') based tokenizer:
Traceback (most recent call last):
File "hg-to-git.py", line 123, in <module>
hgchildren[mparent] += ( str(cset), )
KeyError: ''
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mailinfo: feed only one line to handle_filter() for QP input
The function is intended to be fed one logical line at a time to
inspect, but a QP encoded raw input line can have more than one
lines, just like BASE64 encoded one.
Quoting LF as =0A may be unusual but RFC2045 allows it.
The issue was noticed and fixed by Jay Soffian. JC added a test
to protect the fix from regressing later.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function is intended to be fed one logical line at a time to
inspect, but a QP encoded raw input line can have more than one
lines, just like BASE64 encoded one.
Quoting LF as =0A may be unusual but RFC2045 allows it.
The issue was noticed and fixed by Jay Soffian. JC added a test
to protect the fix from regressing later.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.c: add "const" qualifier to "char *cmd" member of "struct ll_diff_driver"
Also use "git_config_string" to simplify code where "cmd" is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also use "git_config_string" to simplify code where "cmd" is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add "const" qualifier to "char *excludes_file".
Also use "git_config_string" to simplify "config.c" code
where "excludes_file" is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also use "git_config_string" to simplify "config.c" code
where "excludes_file" is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add "const" qualifier to "char *editor_program".
Also use "git_config_string" to simplify "config.c" code
where "editor_program" is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also use "git_config_string" to simplify "config.c" code
where "editor_program" is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add "const" qualifier to "char *pager_program".
Also use "git_config_string" to simplify "config.c" code
where "pager_program" is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also use "git_config_string" to simplify "config.c" code
where "pager_program" is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
config: add 'git_config_string' to refactor string config variables.
In many places we just check if a value from the config file is not
NULL, then we duplicate it and return 0. This patch introduces the new
'git_config_string' function to do that.
This function is also used to refactor some code in 'config.c'.
Refactoring other files is left for other patches.
Also not all the code in "config.c" is refactored, because the function
takes a "const char **" as its first parameter, but in many places a
"char *" is used instead of a "const char *". (And C does not allow
using a "char **" instead of a "const char **" without a warning.)
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many places we just check if a value from the config file is not
NULL, then we duplicate it and return 0. This patch introduces the new
'git_config_string' function to do that.
This function is also used to refactor some code in 'config.c'.
Refactoring other files is left for other patches.
Also not all the code in "config.c" is refactored, because the function
takes a "const char **" as its first parameter, but in many places a
"char *" is used instead of a "const char *". (And C does not allow
using a "char **" instead of a "const char **" without a warning.)
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.c: remove useless check for value != NULL
It is not necessary to check if value != NULL before calling
'parse_lldiff_command' as there is already a check inside this
function.
By the way this patch also improves the existing check inside
'parse_lldiff_command' by using:
return config_error_nonbool(var);
instead of:
return error("%s: lacks value", var);
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not necessary to check if value != NULL before calling
'parse_lldiff_command' as there is already a check inside this
function.
By the way this patch also improves the existing check inside
'parse_lldiff_command' by using:
return config_error_nonbool(var);
instead of:
return error("%s: lacks value", var);
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import: check return value from unpack_entry()
If the tree object we have asked for is deltafied in the packfile and
the delta did not apply correctly or was not able to be decompressed
from the packfile then we can get back NULL instead of the tree data.
This is (part of) the reason why read_sha1_file() can return NULL, so
we need to also handle it the same way.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the tree object we have asked for is deltafied in the packfile and
the delta did not apply correctly or was not able to be decompressed
from the packfile then we can get back NULL instead of the tree data.
This is (part of) the reason why read_sha1_file() can return NULL, so
we need to also handle it the same way.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Validate nicknames of remote branches to prohibit confusing ones
The original problem was that the parsers for configuration files were
getting confused by seeing as nicknames remotes that involved
directory-changing characters. In particular, the branches config file
for ".." was particularly mystifying on platforms that can open
directories and read odd data from them.
The validation function was written by Junio Hamano (with a typo
corrected).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original problem was that the parsers for configuration files were
getting confused by seeing as nicknames remotes that involved
directory-changing characters. In particular, the branches config file
for ".." was particularly mystifying on platforms that can open
directories and read odd data from them.
The validation function was written by Junio Hamano (with a typo
corrected).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.c: replace a 'strdup' with 'xstrdup'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.c: fixup garding of config parser from value=NULL
Christian Couder noticed that there still were a handcrafted error()
call that we should have converted to config_error_nonbool() where
parse_lldiff_command() parses the configuration file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder noticed that there still were a handcrafted error()
call that we should have converted to config_error_nonbool() where
parse_lldiff_command() parses the configuration file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gui: Correct size of dictionary name widget in options dialog
We don't need to fill this entire horizontal cavity, it looks really
bad on some platforms to stretch the widget out to fill the window.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We don't need to fill this entire horizontal cavity, it looks really
bad on some platforms to stretch the widget out to fill the window.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Paper bag fix bad string length call in spellchecker
We don't want the list length, we need the string length.
Found due to a bad " character discovered in the text and
Tcl throwing 'unmatched open quote in list'.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We don't want the list length, we need the string length.
Found due to a bad " character discovered in the text and
Tcl throwing 'unmatched open quote in list'.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
[PATCH] gitk: Heed the lines of context in merge commits
There is an edit box where the number of context lines can be chosen.
But it was only used when regular diffs were displayed, not for
merge commits. This fixes it.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Paul Mackerras <paulus@samba.org>
There is an edit box where the number of context lines can be chosen.
But it was only used when regular diffs were displayed, not for
merge commits. This fixes it.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Merge branch 'maint'
* maint:
config: add test cases for empty value and no value config variables.
cvsimport: have default merge regex also match beginning of commit message
git clone -s documentation: force a new paragraph for the NOTE
status: suggest "git rm --cached" to unstage for initial commit
Protect get_author_ident_from_commit() from filenames in work tree
upload-pack: Initialize the exec-path.
bisect: use verbatim commit subject in the bisect log
git-cvsimport.txt: fix '-M' description.
Revert "pack-objects: only throw away data during memory pressure"
* maint:
config: add test cases for empty value and no value config variables.
cvsimport: have default merge regex also match beginning of commit message
git clone -s documentation: force a new paragraph for the NOTE
status: suggest "git rm --cached" to unstage for initial commit
Protect get_author_ident_from_commit() from filenames in work tree
upload-pack: Initialize the exec-path.
bisect: use verbatim commit subject in the bisect log
git-cvsimport.txt: fix '-M' description.
Revert "pack-objects: only throw away data during memory pressure"
config: add test cases for empty value and no value config variables.
The tests in 't1300-repo-config.sh' did not check what happens when
an empty value like the following is used in the config file:
[emptyvalue]
variable =
Also it was not checked that a variable with no value like the
following:
[novalue]
variable
gives a boolean "true" value, while an ampty value gives a boolean
"false" value.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests in 't1300-repo-config.sh' did not check what happens when
an empty value like the following is used in the config file:
[emptyvalue]
variable =
Also it was not checked that a variable with no value like the
following:
[novalue]
variable
gives a boolean "true" value, while an ampty value gives a boolean
"false" value.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cvsimport: have default merge regex also match beginning of commit message
The default value of @mergerx uses \W, which matches a non-word
character; this means that commit messages like "Merging FOO" are not
matched by default; using \b, which matches a word boundary, instead of
\W fixes that.
This change was suggested by Frédéric Brière through
http://bugs.debian.org/463468
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default value of @mergerx uses \W, which matches a non-word
character; this means that commit messages like "Merging FOO" are not
matched by default; using \b, which matches a word boundary, instead of
\W fixes that.
This change was suggested by Frédéric Brière through
http://bugs.debian.org/463468
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git clone -s documentation: force a new paragraph for the NOTE
It should be loud and clear.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It should be loud and clear.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
status: suggest "git rm --cached" to unstage for initial commit
It makes no sense to suggest "git reset HEAD" since we have
no HEAD commit. This actually used to work but regressed in
f26a0012.
wt_status_print_cached_header was updated to take the whole
wt_status struct rather than just the reference field.
Previously the various code paths were sometimes sending in
s->reference and sometimes sending in NULL, making the
decision on whether this was an initial commit before we
even got to this function. Now we must check the initial
flag here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It makes no sense to suggest "git reset HEAD" since we have
no HEAD commit. This actually used to work but regressed in
f26a0012.
wt_status_print_cached_header was updated to take the whole
wt_status struct rather than just the reference field.
Previously the various code paths were sometimes sending in
s->reference and sometimes sending in NULL, making the
decision on whether this was an initial commit before we
even got to this function. Now we must check the initial
flag here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Protect get_author_ident_from_commit() from filenames in work tree
We used to use "cat-file commit $commit" to extract the original
author information from existing commit, but an earlier commit
5ac2715 (Consistent message encoding while reusing log from an
existing commit) changed it to use "git show -s $commit". If
you have a file in your work tree that can be interpreted as a
valid object name (e.g. "HEAD"), this conversion will not work.
Disambiguate by marking the end of revision parameter on the
comand line with an explicit "--" to fix this.
This breakage is most visible with rebase when a file called
"HEAD" exists in the worktree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to use "cat-file commit $commit" to extract the original
author information from existing commit, but an earlier commit
5ac2715 (Consistent message encoding while reusing log from an
existing commit) changed it to use "git show -s $commit". If
you have a file in your work tree that can be interpreted as a
valid object name (e.g. "HEAD"), this conversion will not work.
Disambiguate by marking the end of revision parameter on the
comand line with an explicit "--" to fix this.
This breakage is most visible with rebase when a file called
"HEAD" exists in the worktree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-pack: Initialize the exec-path.
Since git-upload-pack has to spawn git-pack-objects, it has to make sure
that the latter can be found in the PATH. Without this patch an attempt
to clone or pull via ssh from a server fails if the git tools are not in
the standard PATH on the server even though git clone or git pull were
invoked with --upload-pack=/path/to/git-upload-pack.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since git-upload-pack has to spawn git-pack-objects, it has to make sure
that the latter can be found in the PATH. Without this patch an attempt
to clone or pull via ssh from a server fails if the git tools are not in
the standard PATH on the server even though git clone or git pull were
invoked with --upload-pack=/path/to/git-upload-pack.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bisect: use verbatim commit subject in the bisect log
Due to a typo, the commit subject was shell expanded in the bisect log.
That is, if you had some shell pattern in the commit subject, bisect
would happily put all matching file names into the log.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to a typo, the commit subject was shell expanded in the bisect log.
That is, if you had some shell pattern in the commit subject, bisect
would happily put all matching file names into the log.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-cvsimport.txt: fix '-M' description.
Fix '-M' description. Old one reads as if the user can somehow "see"
the default regex when using -M along with -m.
Signed-off-by: Sergei Organov <osv@javad.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix '-M' description. Old one reads as if the user can somehow "see"
the default regex when using -M along with -m.
Signed-off-by: Sergei Organov <osv@javad.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge git://repo.or.cz/git-gui
* git://repo.or.cz/git-gui:
git-gui: Automatically spell check commit messages as the user types
git-gui: support Git Gui.app under OS X 10.5
git-gui: Update German translation.
git-gui: (i18n) Fix a bunch of still untranslated strings.
* git://repo.or.cz/git-gui:
git-gui: Automatically spell check commit messages as the user types
git-gui: support Git Gui.app under OS X 10.5
git-gui: Update German translation.
git-gui: (i18n) Fix a bunch of still untranslated strings.
Merge git://git.kernel.org/pub/scm/gitk/gitk
* git://git.kernel.org/pub/scm/gitk/gitk:
[PATCH] gitk: learn --show-all output
[PATCH] gitk: properly deal with tag names containing / (slash)
[PATCH] gitk: Add checkbutton to ignore space changes
[PATCH] gitk: Fix "Key bindings" message
* git://git.kernel.org/pub/scm/gitk/gitk:
[PATCH] gitk: learn --show-all output
[PATCH] gitk: properly deal with tag names containing / (slash)
[PATCH] gitk: Add checkbutton to ignore space changes
[PATCH] gitk: Fix "Key bindings" message
[PATCH] gitk: learn --show-all output
It's really not very easy to visualize the commit walker,
because - on purpose - it obvously doesn't show the
uninteresting commits!
We will soon add a "--show-all" flag to the revision walker,
which will make it show uninteresting commits too, and they'll
have a '^' in front of them.
This is to update 'gitk' to show those negative commits in gray
to futureproof it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
It's really not very easy to visualize the commit walker,
because - on purpose - it obvously doesn't show the
uninteresting commits!
We will soon add a "--show-all" flag to the revision walker,
which will make it show uninteresting commits too, and they'll
have a '^' in front of them.
This is to update 'gitk' to show those negative commits in gray
to futureproof it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Revert "pack-objects: only throw away data during memory pressure"
This reverts commit 9c2174350cc0ae0f6bad126e15fe1f9f044117ab.
Nico analyzed and found out that this does not really help, and
I agree with it.
By the time this gets into action and data is actively thrown
away, performance simply goes down the drain due to the data
constantly being reloaded over and over and over and over and
over and over again, to the point of virtually making no
relative progress at all. The previous behavior of enforcing
the memory limit by dynamically shrinking the window size at
least had the effect of allowing some kind of progress, even if
the end result wouldn't be optimal.
And that's the whole point behind this memory limiting feature:
allowing some progress to be made when resources are too limited
to let the repack go unbounded.
This reverts commit 9c2174350cc0ae0f6bad126e15fe1f9f044117ab.
Nico analyzed and found out that this does not really help, and
I agree with it.
By the time this gets into action and data is actively thrown
away, performance simply goes down the drain due to the data
constantly being reloaded over and over and over and over and
over and over again, to the point of virtually making no
relative progress at all. The previous behavior of enforcing
the memory limit by dynamically shrinking the window size at
least had the effect of allowing some kind of progress, even if
the end result wouldn't be optimal.
And that's the whole point behind this memory limiting feature:
allowing some progress to be made when resources are too limited
to let the repack go unbounded.
Fix 'git cvsexportcommit -w $cvsdir ...' when used with relative $GIT_DIR
When using the '-w $cvsdir' option to cvsexportcommit, it will chdir into
$cvsdir before executing several other git commands. If $GIT_DIR is set to
a relative path (e.g. '.'), the git commands executed by cvsexportcommit
will naturally fail.
Therefore, ensure that $GIT_DIR is absolute before the chdir to $cvsdir.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the '-w $cvsdir' option to cvsexportcommit, it will chdir into
$cvsdir before executing several other git commands. If $GIT_DIR is set to
a relative path (e.g. '.'), the git commands executed by cvsexportcommit
will naturally fail.
Therefore, ensure that $GIT_DIR is absolute before the chdir to $cvsdir.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add testcase for 'git cvsexportcommit -w $cvsdir ...' with relative $GIT_DIR
The testcase verifies that 'git cvsexportcommit' functions correctly when
the '-w' option is used, and GIT_DIR is set to a relative path (e.g. '.').
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The testcase verifies that 'git cvsexportcommit' functions correctly when
the '-w' option is used, and GIT_DIR is set to a relative path (e.g. '.').
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gui: Automatically spell check commit messages as the user types
Many user friendly tools like word processors, email editors and web
browsers allow users to spell check the message they are writing
as they type it, making it easy to identify a common misspelling
of a word and correct it on the fly.
We now open a bi-directional pipe to Aspell and feed the message
text the user is editing off to the program about once every 300
milliseconds. This is frequent enough that the user sees the results
almost immediately, but is not so frequent as to cause significant
additional load on the system. If the user has modified the message
text during the last 300 milliseconds we delay until the next period,
ensuring that we avoid flooding the Aspell process with a lot of
text while the user is actively typing their message.
We wait to send the current message buffer to Aspell until the user
is at a word boundary, thus ensuring that we are not likely to ask
for misspelled word detection on a word that the user is actively
typing, as most words are misspelled when only partially typed,
even if the user has thus far typed it correctly.
Misspelled words are highlighted in red and are given an underline,
causing the word to stand out from the others in the buffer. This is
a very common user interface idiom for displaying misspelled words,
but differs from one platform to the next in slight variations.
For example the Mac OS X system prefers using a dashed red underline,
leaving the word in the original text color. Unfortunately the
control that Tk gives us over text display is not powerful enough
to handle such formatting so we have to work with the least common
denominator.
The top suggestions for a misspelling are saved in an array and
offered to the user when they right-click (or on the Mac ctrl-click)
a misspelled word. Selecting an entry from this menu will replace
the misspelling with the correction shown. Replacement is integrated
with the undo/redo stack so undoing a replacement will restore the
misspelled original text.
If Aspell could not be started during git-gui launch we silently eat
the error and run without spell checking support. This way users
who do not have Aspell in their $PATH can continue to use git-gui,
although they will not get the advanced spelling functionality.
If Aspell started successfully the version line and language are
shown in git-gui's about box, below the Tcl/Tk versions. This way
the user can verify the Aspell function has been activated.
If Aspell crashes while we are running we inform the user with an
error dialog and then disable Aspell entirely for the rest of this
git-gui session. This prevents us from fork-bombing the system
with Aspell instances that always crash when presented with the
current message text, should there be a bug in either Aspell or in
git-gui's output to it.
We escape all input lines with ^, as recommended by the Aspell manual
page, as this allows Aspell to properly ignore any input line that is
otherwise looking like a command (e.g. ! to enable terse output). By
using this escape however we need to correct all word offsets by -1 as
Aspell is apparently considering the ^ escape to be part of the line's
character count, but our Tk text widget obviously does not.
Available dictionaries are offered in the Options dialog, allowing
the user to select the language they want to spellcheck commit
messages with for the current repository, as well as the global
user setting that all repositories inherit.
Special thanks to Adam Flott for suggesting connecting git-gui
to Aspell for the purpose of spell checking the commit message,
and to Wincent Colaiuta for the idea to wait for a word boundary
before passing the message over for checking.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Many user friendly tools like word processors, email editors and web
browsers allow users to spell check the message they are writing
as they type it, making it easy to identify a common misspelling
of a word and correct it on the fly.
We now open a bi-directional pipe to Aspell and feed the message
text the user is editing off to the program about once every 300
milliseconds. This is frequent enough that the user sees the results
almost immediately, but is not so frequent as to cause significant
additional load on the system. If the user has modified the message
text during the last 300 milliseconds we delay until the next period,
ensuring that we avoid flooding the Aspell process with a lot of
text while the user is actively typing their message.
We wait to send the current message buffer to Aspell until the user
is at a word boundary, thus ensuring that we are not likely to ask
for misspelled word detection on a word that the user is actively
typing, as most words are misspelled when only partially typed,
even if the user has thus far typed it correctly.
Misspelled words are highlighted in red and are given an underline,
causing the word to stand out from the others in the buffer. This is
a very common user interface idiom for displaying misspelled words,
but differs from one platform to the next in slight variations.
For example the Mac OS X system prefers using a dashed red underline,
leaving the word in the original text color. Unfortunately the
control that Tk gives us over text display is not powerful enough
to handle such formatting so we have to work with the least common
denominator.
The top suggestions for a misspelling are saved in an array and
offered to the user when they right-click (or on the Mac ctrl-click)
a misspelled word. Selecting an entry from this menu will replace
the misspelling with the correction shown. Replacement is integrated
with the undo/redo stack so undoing a replacement will restore the
misspelled original text.
If Aspell could not be started during git-gui launch we silently eat
the error and run without spell checking support. This way users
who do not have Aspell in their $PATH can continue to use git-gui,
although they will not get the advanced spelling functionality.
If Aspell started successfully the version line and language are
shown in git-gui's about box, below the Tcl/Tk versions. This way
the user can verify the Aspell function has been activated.
If Aspell crashes while we are running we inform the user with an
error dialog and then disable Aspell entirely for the rest of this
git-gui session. This prevents us from fork-bombing the system
with Aspell instances that always crash when presented with the
current message text, should there be a bug in either Aspell or in
git-gui's output to it.
We escape all input lines with ^, as recommended by the Aspell manual
page, as this allows Aspell to properly ignore any input line that is
otherwise looking like a command (e.g. ! to enable terse output). By
using this escape however we need to correct all word offsets by -1 as
Aspell is apparently considering the ^ escape to be part of the line's
character count, but our Tk text widget obviously does not.
Available dictionaries are offered in the Options dialog, allowing
the user to select the language they want to spellcheck commit
messages with for the current repository, as well as the global
user setting that all repositories inherit.
Special thanks to Adam Flott for suggesting connecting git-gui
to Aspell for the purpose of spell checking the commit message,
and to Wincent Colaiuta for the idea to wait for a word boundary
before passing the message over for checking.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Merge branch 'maint'
* maint:
git-gui: support Git Gui.app under OS X 10.5
* maint:
git-gui: support Git Gui.app under OS X 10.5
git-gui: support Git Gui.app under OS X 10.5
The Tk Framework moved its location in 10.5 compared to 10.4
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Tested-by: Seth Falcon <seth@userprimary.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The Tk Framework moved its location in 10.5 compared to 10.4
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Tested-by: Seth Falcon <seth@userprimary.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
.mailmap: adjust to a recent patch application glitch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the main documentation (stale notes section)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'db/no-separate-ls-remote-connection' (early part)
* 'db/no-separate-ls-remote-connection' (early part):
Fix "git clone" for git:// protocol
Reduce the number of connects when fetching
* 'db/no-separate-ls-remote-connection' (early part):
Fix "git clone" for git:// protocol
Reduce the number of connects when fetching
Merge branch 'mw/send-email'
* mw/send-email:
git-send-email: Better handling of EOF
git-send-email: SIG{TERM,INT} handlers
git-send-email: ssh/login style password requests
* mw/send-email:
git-send-email: Better handling of EOF
git-send-email: SIG{TERM,INT} handlers
git-send-email: ssh/login style password requests
Merge branch 'db/send-email-omit-cc'
* db/send-email-omit-cc:
git-send-email: Generalize auto-cc recipient mechanism.
* db/send-email-omit-cc:
git-send-email: Generalize auto-cc recipient mechanism.
Merge branch 'jc/error-message-in-cherry-pick'
* jc/error-message-in-cherry-pick:
Make error messages from cherry-pick/revert more sensible
* jc/error-message-in-cherry-pick:
Make error messages from cherry-pick/revert more sensible
Merge branch 'lt/in-core-index'
* lt/in-core-index:
lazy index hashing
Create pathname-based hash-table lookup into index
read-cache.c: introduce is_racy_timestamp() helper
read-cache.c: fix a couple more CE_REMOVE conversion
Also use unpack_trees() in do_diff_cache()
Make run_diff_index() use unpack_trees(), not read_tree()
Avoid running lstat(2) on the same cache entry.
index: be careful when handling long names
Make on-disk index representation separate from in-core one
* lt/in-core-index:
lazy index hashing
Create pathname-based hash-table lookup into index
read-cache.c: introduce is_racy_timestamp() helper
read-cache.c: fix a couple more CE_REMOVE conversion
Also use unpack_trees() in do_diff_cache()
Make run_diff_index() use unpack_trees(), not read_tree()
Avoid running lstat(2) on the same cache entry.
index: be careful when handling long names
Make on-disk index representation separate from in-core one
Merge branch 'ph/describe-match'
* ph/describe-match:
git-name-rev: add a --(no-)undefined option.
git-describe: Add a --match option to limit considered tags.
* ph/describe-match:
git-name-rev: add a --(no-)undefined option.
git-describe: Add a --match option to limit considered tags.
[PATCH] gitk: properly deal with tag names containing / (slash)
When creating a tag through gitk, and the tag name includes a slash (or
slashes), gitk errors out in a popup window. This patch makes gitk use
'git tag' to create the tag instead of modifying files in refs/tags/,
which fixes the issue; if 'git tag' throws an error, gitk pops up with
the error message.
The problem was reported by Frédéric Brière through
http://bugs.debian.org/464104
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
When creating a tag through gitk, and the tag name includes a slash (or
slashes), gitk errors out in a popup window. This patch makes gitk use
'git tag' to create the tag instead of modifying files in refs/tags/,
which fixes the issue; if 'git tag' throws an error, gitk pops up with
the error message.
The problem was reported by Frédéric Brière through
http://bugs.debian.org/464104
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
[PATCH] gitk: Add checkbutton to ignore space changes
Ignoring space changes can be helpful. For example, a commit
claims to only reformat source code and you quickly want to
verify if this claim is true. Or a commit accidentally changes
code formatting and you want to focus on the real changes.
In such cases a button to toggle of whitespace changes would be
quite handy. You could quickly toggle between seeing and
ignoring whitespace changes.
This commit adds such a checkbutton right above the diff view.
However, in general it is a good thing to see whitespace changes
and therefore the state of the checkbutton is not saved. For
example, space changes might happen unintentionally. But they are
real changes yielding different sha1s for the blobs involved.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Ignoring space changes can be helpful. For example, a commit
claims to only reformat source code and you quickly want to
verify if this claim is true. Or a commit accidentally changes
code formatting and you want to focus on the real changes.
In such cases a button to toggle of whitespace changes would be
quite handy. You could quickly toggle between seeing and
ignoring whitespace changes.
This commit adds such a checkbutton right above the diff view.
However, in general it is a good thing to see whitespace changes
and therefore the state of the checkbutton is not saved. For
example, space changes might happen unintentionally. But they are
real changes yielding different sha1s for the blobs involved.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
[PATCH] gitk: Fix "Key bindings" message
The "Key bindings" message under the "Help" menu was too long
and could not be parsed by the translation engine.
Fix both issues by translating one line at a time.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The "Key bindings" message under the "Help" menu was too long
and could not be parsed by the translation engine.
Fix both issues by translating one line at a time.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
git-blame.el: show the when, who and what in the minibuffer.
Change the default operation to show 'when (day the commit was made),
who (who made the commit), what (what the commit log was)' in the
minibuffer instead of SHA1 and title of the commit log.
Since the user may prefer other displaying options, it is made as a
user-configurable option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the default operation to show 'when (day the commit was made),
who (who made the commit), what (what the commit log was)' in the
minibuffer instead of SHA1 and title of the commit log.
Since the user may prefer other displaying options, it is made as a
user-configurable option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define the project whitespace policy
This establishes what the "bad" whitespaces are for this
project.
The rules are:
- Unless otherwise specified, indent with SP that could be
replaced with HT are not "bad". But SP before HT in the
indent is "bad", and trailing whitespaces are "bad".
- For C source files, initial indent by SP that can be replaced
with HT is also "bad".
- Test scripts in t/ and test vectors in its subdirectories can
contain anything, so we make it unrestricted for now.
Anything "bad" will be shown in WHITESPACE error indicator in
diff output, and "apply --whitespace=warn" will warn about it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This establishes what the "bad" whitespaces are for this
project.
The rules are:
- Unless otherwise specified, indent with SP that could be
replaced with HT are not "bad". But SP before HT in the
indent is "bad", and trailing whitespaces are "bad".
- For C source files, initial indent by SP that can be replaced
with HT is also "bad".
- Test scripts in t/ and test vectors in its subdirectories can
contain anything, so we make it unrestricted for now.
Anything "bad" will be shown in WHITESPACE error indicator in
diff output, and "apply --whitespace=warn" will warn about it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add `git svn blame' command
This command is identical to `git blame', but it shows SVN revision
numbers instead of git commit hashes.
[ew: support "^initial commit" and minor formatting fixes]
Signed-off-by: Tim Stoakes <tim@stoakes.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command is identical to `git blame', but it shows SVN revision
numbers instead of git commit hashes.
[ew: support "^initial commit" and minor formatting fixes]
Signed-off-by: Tim Stoakes <tim@stoakes.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint'
* maint: (35 commits)
config.c: guard config parser from value=NULL
builtin-log.c: guard config parser from value=NULL
imap-send.c: guard config parser from value=NULL
wt-status.c: guard config parser from value=NULL
setup.c: guard config parser from value=NULL
remote.c: guard config parser from value=NULL
merge-recursive.c: guard config parser from value=NULL
http.c: guard config parser from value=NULL
help.c: guard config parser from value=NULL
git.c: guard config parser from value=NULL
diff.c: guard config parser from value=NULL
convert.c: guard config parser from value=NULL
connect.c: guard config parser from value=NULL
builtin-tag.c: guard config parser from value=NULL
builtin-show-branch.c: guard config parser from value=NULL
builtin-reflog.c: guard config parser from value=NULL
builtin-log.c: guard config parser from value=NULL
builtin-config.c: guard config parser from value=NULL
builtin-commit.c: guard config parser from value=NULL
builtin-branch.c: guard config parser from value=NULL
...
* maint: (35 commits)
config.c: guard config parser from value=NULL
builtin-log.c: guard config parser from value=NULL
imap-send.c: guard config parser from value=NULL
wt-status.c: guard config parser from value=NULL
setup.c: guard config parser from value=NULL
remote.c: guard config parser from value=NULL
merge-recursive.c: guard config parser from value=NULL
http.c: guard config parser from value=NULL
help.c: guard config parser from value=NULL
git.c: guard config parser from value=NULL
diff.c: guard config parser from value=NULL
convert.c: guard config parser from value=NULL
connect.c: guard config parser from value=NULL
builtin-tag.c: guard config parser from value=NULL
builtin-show-branch.c: guard config parser from value=NULL
builtin-reflog.c: guard config parser from value=NULL
builtin-log.c: guard config parser from value=NULL
builtin-config.c: guard config parser from value=NULL
builtin-commit.c: guard config parser from value=NULL
builtin-branch.c: guard config parser from value=NULL
...
config.c: guard config parser from value=NULL
user.{name,email}, core.{pager,editor,excludesfile,whitespace} and
i18n.{commit,logoutput}encoding all expect string values.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
user.{name,email}, core.{pager,editor,excludesfile,whitespace} and
i18n.{commit,logoutput}encoding all expect string values.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-log.c: guard config parser from value=NULL
format.suffix expects a string value. format.numbered is bool plus "auto"
Signed-off-by: Junio C Hamano <gitster@pobox.com>
format.suffix expects a string value. format.numbered is bool plus "auto"
Signed-off-by: Junio C Hamano <gitster@pobox.com>
imap-send.c: guard config parser from value=NULL
None of the configuration variables this expects is boolean.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
None of the configuration variables this expects is boolean.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt-status.c: guard config parser from value=NULL
status.color.* and color.status.* expect a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
status.color.* and color.status.* expect a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup.c: guard config parser from value=NULL
core.worktree expects a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
core.worktree expects a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
remote.c: guard config parser from value=NULL
branch.*.{remote,merge} expect a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
branch.*.{remote,merge} expect a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive.c: guard config parser from value=NULL
merge.default, merge.*.{name,driver} expect a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge.default, merge.*.{name,driver} expect a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http.c: guard config parser from value=NULL
http.sslcert and friends expect a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http.sslcert and friends expect a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
help.c: guard config parser from value=NULL
help.format configuration expects a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
help.format configuration expects a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git.c: guard config parser from value=NULL
alias.* configuration expects a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
alias.* configuration expects a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.c: guard config parser from value=NULL
diff.external, diff.*.command, diff.color.*, color.diff.* and
diff.*.funcname configuration variables expect a string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.external, diff.*.command, diff.color.*, color.diff.* and
diff.*.funcname configuration variables expect a string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
convert.c: guard config parser from value=NULL
filter.*.smudge and filter.*.clean configuration variables expect a
string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
filter.*.smudge and filter.*.clean configuration variables expect a
string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
connect.c: guard config parser from value=NULL
core.gitproxy configuration expects a string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
core.gitproxy configuration expects a string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-tag.c: guard config parser from value=NULL
user.signingkey configuration expects a string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
user.signingkey configuration expects a string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-show-branch.c: guard config parser from value=NULL
showbranch.default configuration expects a string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
showbranch.default configuration expects a string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>