Code

git.git
15 years agoTest git archive --remote
Thomas Rast [Sat, 27 Jun 2009 18:47:43 +0000 (20:47 +0200)]
Test git archive --remote

Add a small test case for git archive --remote (and thus
git-upload-archive), which so far went untested.

Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agofread does not return negative on error
Roel Kluin [Mon, 22 Jun 2009 16:42:33 +0000 (18:42 +0200)]
fread does not return negative on error

size_t res cannot be less than 0. fread returns 0 on error.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agot3700-add: add a POSIXPERM prerequisite to a new test
Johannes Sixt [Mon, 22 Jun 2009 07:30:38 +0000 (09:30 +0200)]
t3700-add: add a POSIXPERM prerequisite to a new test

The new test does a 'chmod 0', which does not have the intended
effect on Windows.

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoMerge branch 'sb/maint-1.6.0-add-config-fix' into maint
Junio C Hamano [Mon, 22 Jun 2009 07:44:09 +0000 (00:44 -0700)]
Merge branch 'sb/maint-1.6.0-add-config-fix' into maint

* sb/maint-1.6.0-add-config-fix:
  add: allow configurations to be overriden by command line

15 years agoGIT 1.6.3.3 v1.6.3.3
Junio C Hamano [Mon, 22 Jun 2009 04:02:49 +0000 (21:02 -0700)]
GIT 1.6.3.3

Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoMerge branch 'ak/maint-for-each-ref-no-lookup' into maint
Junio C Hamano [Mon, 22 Jun 2009 04:15:39 +0000 (21:15 -0700)]
Merge branch 'ak/maint-for-each-ref-no-lookup' into maint

* ak/maint-for-each-ref-no-lookup:
  for-each-ref: Do not lookup objects when they will not be used

15 years agoMerge branch 'rc/maint-http-local-slot-fix' into maint
Junio C Hamano [Mon, 22 Jun 2009 04:15:31 +0000 (21:15 -0700)]
Merge branch 'rc/maint-http-local-slot-fix' into maint

* rc/maint-http-local-slot-fix:
  http*: cleanup slot->local after fclose

15 years agoMerge branch 'cb/maint-no-double-merge' into maint
Junio C Hamano [Mon, 22 Jun 2009 04:15:27 +0000 (21:15 -0700)]
Merge branch 'cb/maint-no-double-merge' into maint

* cb/maint-no-double-merge:
  refuse to merge during a merge

15 years agoMerge branch 'mn/maint-iconv-autoconf' into maint
Junio C Hamano [Mon, 22 Jun 2009 04:14:25 +0000 (21:14 -0700)]
Merge branch 'mn/maint-iconv-autoconf' into maint

* mn/maint-iconv-autoconf:
  fix handling of iconv configuration options

15 years agoMerge branch 'lt/maint-unsigned-left-shift' into maint
Junio C Hamano [Mon, 22 Jun 2009 04:14:09 +0000 (21:14 -0700)]
Merge branch 'lt/maint-unsigned-left-shift' into maint

* lt/maint-unsigned-left-shift:
  Fix big left-shifts of unsigned char

15 years agoMerge branch 'pb/maint-1.6.2-userdiff-fix' into maint
Junio C Hamano [Mon, 22 Jun 2009 04:08:05 +0000 (21:08 -0700)]
Merge branch 'pb/maint-1.6.2-userdiff-fix' into maint

* pb/maint-1.6.2-userdiff-fix:
  upload-archive: fix infinite loop on Cygwin
  avoid exponential regex match for java and objc function names

15 years agoattribute: whitespace set to true detects all errors known to git
Junio C Hamano [Sun, 21 Jun 2009 09:35:18 +0000 (02:35 -0700)]
attribute: whitespace set to true detects all errors known to git

That is what the documentation says, but the code pretends as if all the
known whitespace error tokens were given.

Among the whitespace error tokens, there is one kind that loosens the rule
when set: cr-at-eol.  Which means that whitespace error token that is set
to true ignores a newly introduced CR at the end, which is inconsistent
with the documentation.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years ago.gitattributes: CR at the end of the line is an error
Nanako Shiraishi [Fri, 19 Jun 2009 10:42:53 +0000 (19:42 +0900)]
.gitattributes: CR at the end of the line is an error

When a CR is accidentally added at the end of a C source file in the git
project tree, "git diff --check" doesn't detect it as an error.

    $ echo abQ | tr Q '\015' >>fast-import.c
    $ git diff --check

I think this is because the "whitespace" attribute is set to *.[ch] files
without specifying what kind of errors are caught. It makes git "notice
all types of errors" (as described in the documentation), but I think it
is incorrectly setting cr-at-eol, too, and hides this error.

Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agot3505: fix abuse of test_expect_code
Junio C Hamano [Sun, 21 Jun 2009 09:01:28 +0000 (02:01 -0700)]
t3505: fix abuse of test_expect_code

The test wanted to make sure that cherry-pick exits with status 1,
but with the way it was placed after "git checkout master &&" meant
that it could have misjudged success if checkout barfed with the
same failure status.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoMerge branch 'maint-1.6.2' into maint
Junio C Hamano [Sun, 21 Jun 2009 06:48:46 +0000 (23:48 -0700)]
Merge branch 'maint-1.6.2' into maint

* maint-1.6.2:
  git-show-ref.txt: remove word and make consistent
  git-svn documentation: fix typo in 'rebase vs. pull/merge' section
  use xstrdup, not strdup in ll-merge.c

15 years agoMerge branch 'maint-1.6.1' into maint-1.6.2
Junio C Hamano [Sun, 21 Jun 2009 06:48:28 +0000 (23:48 -0700)]
Merge branch 'maint-1.6.1' into maint-1.6.2

* maint-1.6.1:
  git-show-ref.txt: remove word and make consistent
  git-svn documentation: fix typo in 'rebase vs. pull/merge' section
  use xstrdup, not strdup in ll-merge.c

15 years agoMerge branch 'maint-1.6.0' into maint-1.6.1
Junio C Hamano [Sun, 21 Jun 2009 06:48:21 +0000 (23:48 -0700)]
Merge branch 'maint-1.6.0' into maint-1.6.1

* maint-1.6.0:
  git-show-ref.txt: remove word and make consistent
  git-svn documentation: fix typo in 'rebase vs. pull/merge' section
  use xstrdup, not strdup in ll-merge.c

15 years agogit-show-ref.txt: remove word and make consistent
Stephen Boyd [Sun, 21 Jun 2009 04:40:45 +0000 (21:40 -0700)]
git-show-ref.txt: remove word and make consistent

Under is better than in because of the nested nature of the .git
directory.

"also using" sounds a little odd, plus we say combined with later on so
just use that.

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agogit-svn documentation: fix typo in 'rebase vs. pull/merge' section
Miklos Vajna [Sat, 20 Jun 2009 11:27:15 +0000 (13:27 +0200)]
git-svn documentation: fix typo in 'rebase vs. pull/merge' section

Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoadd: allow configurations to be overriden by command line
Stephen Boyd [Thu, 18 Jun 2009 09:17:54 +0000 (02:17 -0700)]
add: allow configurations to be overriden by command line

Don't call git_config after parsing the command line options, otherwise
the config settings will override any settings made by the command line.

This can be seen by setting add.ignore_errors and then specifying
--no-ignore-errors when using git-add.

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agohttp.c: fix compiling with libcurl 7.9.2
Mark Lodato [Mon, 15 Jun 2009 02:39:00 +0000 (22:39 -0400)]
http.c: fix compiling with libcurl 7.9.2

Change the minimimum required libcurl version for the http.sslKey option
to 7.9.3.  Previously, preprocessor macros checked for >= 7.9.2, which
is incorrect because CURLOPT_SSLKEY was introduced in 7.9.3.  This now
allows git to compile with libcurl 7.9.2.

Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoimport-tars: support symlinks
Johannes Schindelin [Wed, 17 Jun 2009 12:49:39 +0000 (14:49 +0200)]
import-tars: support symlinks

Without this patch, symbolic links are turned into empty files.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoupload-archive: fix infinite loop on Cygwin
René Scharfe [Wed, 17 Jun 2009 10:11:10 +0000 (12:11 +0200)]
upload-archive: fix infinite loop on Cygwin

On Cygwin, poll() reports POLLIN even for file descriptors that have
reached their end.  This caused git upload-archive to be stuck in an
infinite loop, as it only looked at the POLLIN flag.

In addition to POLLIN, check if read() returned 0, which indicates
end-of-file, and keep looping only as long as at least one of the file
descriptors has input.  This lets the following command finish on its
own when run in a git repository on Cygwin, instead of it getting stuck
after printing all file names:

$ git archive -v --remote . HEAD >/dev/null

Reported-by: Bob Kagy <bobkagy@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoavoid exponential regex match for java and objc function names
Paolo Bonzini [Wed, 17 Jun 2009 14:26:06 +0000 (16:26 +0200)]
avoid exponential regex match for java and objc function names

In the old regex

^[ \t]*(([ \t]*[A-Za-z_][A-Za-z_0-9]*){2,}[ \t]*\([^;]*)$
        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

you can backtrack arbitrarily from [A-Za-z_0-9]* into [A-Za-z_], thus
causing an exponential number of backtracks.  Ironically it also causes
the regex not to work as intended; for example "catch" can match the
underlined part of the regex, the first repetition matching "c" and
the second matching "atch".

The replacement regex avoids this problem, because it makes sure that
at least a space/tab is eaten on each repetition.  In other words,
a suffix of a repetition can never be a prefix of the next repetition.

Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoFix big left-shifts of unsigned char
Linus Torvalds [Thu, 18 Jun 2009 00:22:27 +0000 (17:22 -0700)]
Fix big left-shifts of unsigned char

Shifting 'unsigned char' or 'unsigned short' left can result in sign
extension errors, since the C integer promotion rules means that the
unsigned char/short will get implicitly promoted to a signed 'int' due to
the shift (or due to other operations).

This normally doesn't matter, but if you shift things up sufficiently, it
will now set the sign bit in 'int', and a subsequent cast to a bigger type
(eg 'long' or 'unsigned long') will now sign-extend the value despite the
original expression being unsigned.

One example of this would be something like

unsigned long size;
unsigned char c;

size += c << 24;

where despite all the variables being unsigned, 'c << 24' ends up being a
signed entity, and will get sign-extended when then doing the addition in
an 'unsigned long' type.

Since git uses 'unsigned char' pointers extensively, we actually have this
bug in a couple of places.

I may have missed some, but this is the result of looking at

git grep '[^0-9  ][  ]*<<[  ][a-z]' -- '*.c' '*.h'
git grep '<<[   ]*24'

which catches at least the common byte cases (shifting variables by a
variable amount, and shifting by 24 bits).

I also grepped for just 'unsigned char' variables in general, and
converted the ones that most obviously ended up getting implicitly cast
immediately anyway (eg hash_name(), encode_85()).

In addition to just avoiding 'unsigned char', this patch also tries to use
a common idiom for the delta header size thing. We had three different
variations on it: "& 0x7fUL" in one place (getting the sign extension
right), and "& ~0x80" and "& 0x7f" in two other places (not getting it
right). Apart from making them all just avoid using "unsigned char" at
all, I also unified them to then use a simple "& 0x7f".

I considered making a sparse extension which warns about doing implicit
casts from unsigned types to signed types, but it gets rather complex very
quickly, so this is just a hack.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agopull, rebase: simplify to use die()
Stephen Boyd [Sun, 14 Jun 2009 23:08:56 +0000 (16:08 -0700)]
pull, rebase: simplify to use die()

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agouse xstrdup, not strdup in ll-merge.c
Jim Meyering [Sun, 14 Jun 2009 19:47:54 +0000 (21:47 +0200)]
use xstrdup, not strdup in ll-merge.c

Otherwise, a fluky allocation failure would cause merge
configuration settings to be silently ignored.

Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoMerge branch 'maint-1.6.2' into maint
Junio C Hamano [Sun, 14 Jun 2009 00:10:08 +0000 (17:10 -0700)]
Merge branch 'maint-1.6.2' into maint

* maint-1.6.2:
  git-rerere.txt: grammatical fixups and cleanups

15 years agoMerge branch 'maint-1.6.1' into maint-1.6.2
Junio C Hamano [Sun, 14 Jun 2009 00:09:50 +0000 (17:09 -0700)]
Merge branch 'maint-1.6.1' into maint-1.6.2

* maint-1.6.1:
  git-rerere.txt: grammatical fixups and cleanups

15 years agoMerge branch 'maint-1.6.0' into maint-1.6.1
Junio C Hamano [Sun, 14 Jun 2009 00:09:45 +0000 (17:09 -0700)]
Merge branch 'maint-1.6.0' into maint-1.6.1

* maint-1.6.0:
  git-rerere.txt: grammatical fixups and cleanups
  http-push.c::remove_locks(): fix use after free

15 years agogit-rerere.txt: grammatical fixups and cleanups
Stephen Boyd [Sat, 13 Jun 2009 18:20:00 +0000 (11:20 -0700)]
git-rerere.txt: grammatical fixups and cleanups

Rewrite the gc section using unresolved and resolved instead of "not
recorded". Add plurals and missing articles. Make some sentences have
consistent tense. Try and be more active by removing "that" and
simplifying sentences.

The terms "hand-resolve" and "hand resolve" were used, so just use "hand
resolve" to be more consistent.

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoDocumentation: git-send-mail can take rev-list arg to drive format-patch
Paolo Bonzini [Thu, 11 Jun 2009 07:30:27 +0000 (09:30 +0200)]
Documentation: git-send-mail can take rev-list arg to drive format-patch

The git-send-email docs do not mention except in the usage lines
the combined patch formatting/sending ability of git-send-email.
This patch expands on the possible arguments to git-send-email
and explains the meaning of the rev-list argument.

Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoMerge branch 'uk/maint-1.5.3-rebase-i-reflog' into maint
Junio C Hamano [Thu, 11 Jun 2009 21:14:00 +0000 (14:14 -0700)]
Merge branch 'uk/maint-1.5.3-rebase-i-reflog' into maint

* uk/maint-1.5.3-rebase-i-reflog:
  rebase--interactive: remote stray closing parenthesis

Conflicts:
git-rebase--interactive.sh

15 years agorebase--interactive: remote stray closing parenthesis
Uwe Kleine-König [Thu, 11 Jun 2009 20:27:55 +0000 (22:27 +0200)]
rebase--interactive: remote stray closing parenthesis

it was introduced in 68a163c9b483ae352fcfee8c4505d113213daa73

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Jöhännës "Dschö" Schindëlin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agodiff.c: plug a memory leak in an error path
Johannes Sixt [Mon, 8 Jun 2009 20:34:30 +0000 (22:34 +0200)]
diff.c: plug a memory leak in an error path

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agofetch-pack: close output channel after sideband demultiplexer terminates
Johannes Sixt [Mon, 8 Jun 2009 08:51:22 +0000 (10:51 +0200)]
fetch-pack: close output channel after sideband demultiplexer terminates

fetch-pack runs the sideband demultiplexer using start_async(). This
facility requires that the asynchronously executed function closes the
output file descriptor (see Documentation/technical/api-run-command.txt).
But the sideband demultiplexer did not do that. This fixes it.

In certain error situations this could lock up a fetch operation on
Windows because the asynchronous function is run in a thread; by not
closing the output fd the reading end never got EOF and waited for more
data indefinitely. On Unix this is not a problem because the asynchronous
function is run in a separate process, which exits after the function ends
and so implicitly closes the output.

Since the pack that is sent over the wire encodes the number of objects in
the stream, during normal operation the reading end knows when the stream
ends and terminates by itself, and does not lock up.

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agofix handling of iconv configuration options
Marco Nelissen [Tue, 9 Jun 2009 03:46:38 +0000 (20:46 -0700)]
fix handling of iconv configuration options

Fix the way in which the configure script handles --without-iconv
(and --with-iconv=no), which it  used to essentially ignore.
Also fix the way the configure script determines the value of
NEEDS_LIBICONV, which would be incorrectly set to 'YesPlease' on
systems that lack iconv entirely.

Signed-off-by: Marco Nelissen <marcone@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agobuiltin-remote: Make "remote show" display all urls
Michael J Gruber [Sat, 6 Jun 2009 15:16:30 +0000 (17:16 +0200)]
builtin-remote: Make "remote show" display all urls

Currently, "git remote -v" lists all urls whereas "git remote show
$remote" shows only the first. Make it so that both show all.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoDocumentation: refer to gitworkflows(7) from tutorial and git(1)
Thomas Rast [Sat, 6 Jun 2009 13:11:07 +0000 (15:11 +0200)]
Documentation: refer to gitworkflows(7) from tutorial and git(1)

Add references to the gitworkflows(7) manpage added in f948dd8
(Documentation: add manpage about workflows, 2008-10-19) to both
gittutorial(1) and git(1), so that new users might actually discover
and read it.

Noticed by Randal L. Schwartz.

Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agodaemon: Strictly parse the "extra arg" part of the command
Shawn O. Pearce [Fri, 5 Jun 2009 01:33:32 +0000 (18:33 -0700)]
daemon: Strictly parse the "extra arg" part of the command

Since 1.4.4.5 (49ba83fb67 "Add virtualization support to git-daemon")
git daemon enters an infinite loop and never terminates if a client
hides any extra arguments in the initial request line which is not
exactly "\0host=blah\0".

Since that change, a client must never insert additional extra
arguments, or attempt to use any argument other than "host=", as
any daemon will get stuck parsing the request line and will never
complete the request.

Since the client can't tell if the daemon is patched or not, it
is not possible to know if additional extra args might actually be
able to be safely requested.

If we ever need to extend the git daemon protocol to support a new
feature, we may have to do something like this to the exchange:

  # If both support git:// v2
  #
  C: 000cgit://v2
  S: 0010ok host user
  C: 0018host git.kernel.org
  C: 0027git-upload-pack /pub/linux-2.6.git
  S: ...git-upload-pack header...

  # If client supports git:// v2, server does not:
  #
  C: 000cgit://v2
  S: <EOF>

  C: 003bgit-upload-pack /pub/linux-2.6.git\0host=git.kernel.org\0
  S: ...git-upload-pack header...

This requires the client to create two TCP connections to talk to
an older git daemon, however all daemons since the introduction of
daemon.c will safely reject the unknown "git://v2" command request,
so the client can quite easily determine the server supports an
older protocol.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agohttp*: cleanup slot->local after fclose
Tay Ray Chuan [Sat, 6 Jun 2009 08:43:26 +0000 (16:43 +0800)]
http*: cleanup slot->local after fclose

Set slot->local to NULL after doing a fclose() on the file it points
to. This prevents the passing of a FILE* pointer to a fclose()'d file
to ftell() in http.c::run_active_slot().

This issue was raised by Clemens Buchacher on 30th May 2009:

  http://www.spinics.net/lists/git/msg104623.html

Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoGIT 1.6.3.2 v1.6.3.2
Junio C Hamano [Thu, 4 Jun 2009 05:42:15 +0000 (22:42 -0700)]
GIT 1.6.3.2

Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agogrep: fix empty word-regexp matches
René Scharfe [Wed, 3 Jun 2009 16:19:01 +0000 (18:19 +0200)]
grep: fix empty word-regexp matches

The command "git grep -w ''" dies as soon as it encounters an empty line,
reporting (wrongly) that "regexp returned nonsense".  The first hunk of
this patch relaxes the sanity check that is responsible for that,
allowing matches to start at the end.

The second hunk complements it by making sure that empty matches are
rejected if -w was specified, as they are not really words.

GNU grep does the same:

$ echo foo | grep -c ''
1
$ echo foo | grep -c -w ''
0

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoblame: correctly handle a path that used to be a directory
Junio C Hamano [Wed, 3 Jun 2009 07:43:22 +0000 (00:43 -0700)]
blame: correctly handle a path that used to be a directory

When trying to see if the same path exists in the parent, we ran
"diff-tree" with pathspec set to the path we are interested in with the
parent, and expect either to have exactly one resulting filepair (either
"changed from the parent", "created when there was none") or nothing (when
there is no change from the parent).

If the path used to be a directory, however, we will also see unbounded
number of entries that talk about the files that used to exist underneath
the directory in question.  Correctly pick only the entry that describes
the path we are interested in in such a case (namely, the creation of the
path as a regular file).

Noticed by Ben Willard.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoadd -i: do not dump patch during application
Thomas Rast [Tue, 2 Jun 2009 21:34:27 +0000 (23:34 +0200)]
add -i: do not dump patch during application

Remove a debugging print that snuck in at 7a26e65 (Revert
"git-add--interactive: remove hunk coalescing", 2009-05-16).

Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoUpdate draft release notes for 1.6.3.2
Junio C Hamano [Tue, 2 Jun 2009 14:57:39 +0000 (07:57 -0700)]
Update draft release notes for 1.6.3.2

Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoMerge branch 'cb/maint-1.6.0-xdl-merge-fix' into maint
Junio C Hamano [Tue, 2 Jun 2009 14:48:44 +0000 (07:48 -0700)]
Merge branch 'cb/maint-1.6.0-xdl-merge-fix' into maint

* cb/maint-1.6.0-xdl-merge-fix:
  Change xdl_merge to generate output even for null merges
  t6023: merge-file fails to output anything for a degenerate merge

Conflicts:
xdiff/xmerge.c

15 years agoMerge branch 'rs/maint-grep-word-regexp-fix' into maint
Junio C Hamano [Tue, 2 Jun 2009 14:48:09 +0000 (07:48 -0700)]
Merge branch 'rs/maint-grep-word-regexp-fix' into maint

* rs/maint-grep-word-regexp-fix:
  grep: fix colouring of matches with zero length
  grep: fix word-regexp at the beginning of lines

15 years agoMerge branch 'sb/maint-1.6.2-opt-filename-fix' into maint
Junio C Hamano [Tue, 2 Jun 2009 14:47:03 +0000 (07:47 -0700)]
Merge branch 'sb/maint-1.6.2-opt-filename-fix' into maint

* sb/maint-1.6.2-opt-filename-fix:
  apply, fmt-merge-msg: use relative filenames
  commit: -F overrides -t

15 years agoMerge branch 'jc/maint-add-p-coalesce-fix' into maint
Junio C Hamano [Tue, 2 Jun 2009 14:46:52 +0000 (07:46 -0700)]
Merge branch 'jc/maint-add-p-coalesce-fix' into maint

* jc/maint-add-p-coalesce-fix:
  t3701: ensure correctly set up repository after skipped tests
  Revert "git-add--interactive: remove hunk coalescing"
  Splitting a hunk that adds a line at the top fails in "add -p"

15 years agoMerge branch 'tr/maint-doc-stash-pop' into maint
Junio C Hamano [Tue, 2 Jun 2009 14:43:45 +0000 (07:43 -0700)]
Merge branch 'tr/maint-doc-stash-pop' into maint

* tr/maint-doc-stash-pop:
  Documentation: teach stash/pop workflow instead of stash/apply

15 years agogrep: fix colouring of matches with zero length
René Scharfe [Mon, 1 Jun 2009 21:53:05 +0000 (23:53 +0200)]
grep: fix colouring of matches with zero length

If a zero-length match is encountered, break out of loop and show the rest
of the line uncoloured.  Otherwise we'd be looping forever, trying to make
progress by advancing the pointer by zero characters.

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agorefuse to merge during a merge
Clemens Buchacher [Mon, 1 Jun 2009 09:20:56 +0000 (11:20 +0200)]
refuse to merge during a merge

The following is an easy mistake to make for users coming from version
control systems with an "update and commit"-style workflow.

        1. git pull
        2. resolve conflicts
        3. git pull

Step 3 overrides MERGE_HEAD, starting a new merge with dirty index.
IOW, probably not what the user intended. Instead, refuse to merge
again if a merge is in progress.

Reported-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agofor-each-ref: Do not lookup objects when they will not be used
Anders Kaseorg [Wed, 27 May 2009 19:23:12 +0000 (15:23 -0400)]
for-each-ref: Do not lookup objects when they will not be used

This makes commands such as `git for-each-ref --format='%(refname)'`,
which are used heavily by the bash_completion code, run about 6 times
faster on an uncached repository (3 s intead of 18 s on my linux-2.6
repository with several remotes).

Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoDocumentation: teach stash/pop workflow instead of stash/apply
Thomas Rast [Thu, 28 May 2009 09:40:15 +0000 (11:40 +0200)]
Documentation: teach stash/pop workflow instead of stash/apply

Recent discussion on the list showed some comments in favour of a
stash/pop workflow:

  http://marc.info/?l=git&m=124234911423358&w=2
  http://marc.info/?l=git&m=124235348327711&w=2

Change the stash documentation and examples to document pop in its own
right (and apply in terms of pop), and use stash/pop in the examples.

Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agofix segfault showing an empty remote
Clemens Buchacher [Wed, 27 May 2009 20:13:43 +0000 (22:13 +0200)]
fix segfault showing an empty remote

In case of an empty list, the search for its tail caused a
NULL-pointer dereference.

Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Reported-by: Erik Faye-Lund <kusmabite@googlemail.com>
Acked-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoPrepare for 1.6.3.2
Junio C Hamano [Tue, 26 May 2009 02:20:39 +0000 (19:20 -0700)]
Prepare for 1.6.3.2

Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoMerge branch 'js/maint-no-ln-across-libexec-and-bin' into maint
Junio C Hamano [Tue, 26 May 2009 02:04:29 +0000 (19:04 -0700)]
Merge branch 'js/maint-no-ln-across-libexec-and-bin' into maint

* js/maint-no-ln-across-libexec-and-bin:
  Add NO_CROSS_DIRECTORY_HARDLINKS support to the Makefile

Conflicts:
Makefile

15 years agoMerge branch 'lt/maint-diff-reduce-lstat' into maint
Junio C Hamano [Tue, 26 May 2009 02:04:08 +0000 (19:04 -0700)]
Merge branch 'lt/maint-diff-reduce-lstat' into maint

* lt/maint-diff-reduce-lstat:
  Teach 'git checkout' to preload the index contents
  Avoid unnecessary 'lstat()' calls in 'get_stat_data()'

15 years agoMerge branch 'jm/format-patch-no-auto-n-when-k-is-given' into maint
Junio C Hamano [Tue, 26 May 2009 02:03:52 +0000 (19:03 -0700)]
Merge branch 'jm/format-patch-no-auto-n-when-k-is-given' into maint

* jm/format-patch-no-auto-n-when-k-is-given:
  format-patch let -k override a config-specified format.numbered

15 years agoMerge branch 'do/maint-merge-recursive-fix' into maint
Junio C Hamano [Tue, 26 May 2009 02:03:43 +0000 (19:03 -0700)]
Merge branch 'do/maint-merge-recursive-fix' into maint

* do/maint-merge-recursive-fix:
  merge-recursive: never leave index unmerged while recursing

15 years agoMerge branch 'jk/maint-1.6.0-trace-argv' into maint
Junio C Hamano [Tue, 26 May 2009 02:03:20 +0000 (19:03 -0700)]
Merge branch 'jk/maint-1.6.0-trace-argv' into maint

* jk/maint-1.6.0-trace-argv:
  fix GIT_TRACE segfault with shell-quoted aliases

Conflicts:
alias.c

15 years agoMerge branch 'np/push-delta' into maint
Junio C Hamano [Tue, 26 May 2009 02:02:11 +0000 (19:02 -0700)]
Merge branch 'np/push-delta' into maint

* np/push-delta:
  allow OFS_DELTA objects during a push

15 years agoMerge branch 'ar/merge-one-file-diag' into maint
Junio C Hamano [Tue, 26 May 2009 02:01:59 +0000 (19:01 -0700)]
Merge branch 'ar/merge-one-file-diag' into maint

* ar/merge-one-file-diag:
  Clarify kind of conflict in merge-one-file helper

15 years agoMerge branch 'ar/unlink-err' into maint
Junio C Hamano [Tue, 26 May 2009 02:01:50 +0000 (19:01 -0700)]
Merge branch 'ar/unlink-err' into maint

* ar/unlink-err:
  print unlink(2) errno in copy_or_link_directory
  replace direct calls to unlink(2) with unlink_or_warn
  Introduce an unlink(2) wrapper which gives warning if unlink failed

15 years agoMerge branch 'jk/maint-add-empty' into maint
Junio C Hamano [Tue, 26 May 2009 02:01:41 +0000 (19:01 -0700)]
Merge branch 'jk/maint-add-empty' into maint

* jk/maint-add-empty:
  add: don't complain when adding empty project root

15 years agofix cat-file usage message and documentation
Jeff King [Mon, 25 May 2009 10:33:15 +0000 (06:33 -0400)]
fix cat-file usage message and documentation

cat-file with an object on the command line requires an
option to tell it what to output (type, size, pretty-print,
etc). However, the square brackets in the usage imply that
those options are not required. This patch switches them to
parentheses to indicate "required but grouped-OR" (curly
braces might also work, but this follows the convention used
already by "git stash").

While we're at it, let's change the <sha1> specifier in the
usage to <object>. That's what the documentation uses, and
it does actually use the regular object lookup.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agofetch: report ref storage DF errors more accurately
Jeff King [Mon, 25 May 2009 10:40:54 +0000 (06:40 -0400)]
fetch: report ref storage DF errors more accurately

When we fail to store a fetched ref, we recommend that the
user try running "git prune" to remove up any old refs that
have been deleted by the remote, which would clear up any DF
conflicts. However, ref storage might fail for other
reasons (e.g., permissions problems) in which case the
advice is useless and misleading.

This patch detects when there is an actual DF situation and
only issues the advice when one is found.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agolock_ref: inform callers of unavailable ref
Jeff King [Mon, 25 May 2009 10:37:15 +0000 (06:37 -0400)]
lock_ref: inform callers of unavailable ref

One of the ways that locking might fail is that there is a
DF conflict between two refs (e.g., you want to lock
"foo/bar" but "foo" already exists). In this case, we return
an error, but there is no way for the caller to know the
specific problem.

This patch sets errno to ENOTDIR, which is the most sensible
code. It's what we would see if the refs were stored purely
in the filesystem (but these days we must check the
namespace manually due to packed refs).

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agot3701: ensure correctly set up repository after skipped tests
Johannes Sixt [Mon, 25 May 2009 12:07:55 +0000 (14:07 +0200)]
t3701: ensure correctly set up repository after skipped tests

There are two tests that are skipped if file modes are not obeyed by the
file system. In this case, the subsequent test failed because the
repository was in an unexpected state. This corrects it.

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agomerge-options.txt: Clarify merge --squash
Michael J Gruber [Mon, 25 May 2009 16:00:10 +0000 (18:00 +0200)]
merge-options.txt: Clarify merge --squash

With the --squash option, merge sets up the index just like for a real
merge, but without the merge info (stages). Say so.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoChange xdl_merge to generate output even for null merges
Charles Bailey [Mon, 25 May 2009 00:21:14 +0000 (01:21 +0100)]
Change xdl_merge to generate output even for null merges

xdl_merge used to have a check to ensure that there was at least
some change in one or other side being merged but this suppressed
output for the degenerate case when base, local and remote
contents were all identical.

Removing this check enables correct output in the degenerate case
and xdl_free_script handles freeing NULL scripts so there is no
need to have the check for these calls.

Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agot6023: merge-file fails to output anything for a degenerate merge
Charles Bailey [Mon, 25 May 2009 00:21:13 +0000 (01:21 +0100)]
t6023: merge-file fails to output anything for a degenerate merge

In the case that merge-file is passed three files with identical
contents it wipes the contents of the output file instead of
leaving it unchanged.

Althought merge-file is porcelain and this will never happen in
normal usage, it is still wrong.

Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoMerge branch 'maint-1.6.2' into maint
Junio C Hamano [Sun, 24 May 2009 22:29:33 +0000 (15:29 -0700)]
Merge branch 'maint-1.6.2' into maint

* maint-1.6.2:
  http-push.c::remove_locks(): fix use after free

15 years agoMerge branch 'maint-1.6.1' into maint-1.6.2
Junio C Hamano [Sun, 24 May 2009 22:29:23 +0000 (15:29 -0700)]
Merge branch 'maint-1.6.1' into maint-1.6.2

* maint-1.6.1:
  http-push.c::remove_locks(): fix use after free

15 years agoMerge branch 'maint-1.6.0' into maint-1.6.1
Junio C Hamano [Sun, 24 May 2009 22:29:13 +0000 (15:29 -0700)]
Merge branch 'maint-1.6.0' into maint-1.6.1

* maint-1.6.0:
  http-push.c::remove_locks(): fix use after free

15 years agohttp-push.c::remove_locks(): fix use after free
Alex Riesen [Sun, 24 May 2009 13:16:49 +0000 (15:16 +0200)]
http-push.c::remove_locks(): fix use after free

Noticed and reported by Serhat Şevki Dinçer.

Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agogrep: fix word-regexp at the beginning of lines
René Scharfe [Sat, 23 May 2009 11:45:26 +0000 (13:45 +0200)]
grep: fix word-regexp at the beginning of lines

After bol is forwarded, it doesn't represent the beginning of the line
any more.  This means that the beginning-of-line marker (^) mustn't match,
i.e. the regex flag REG_NOTBOL needs to be set.

This bug was introduced by fb62eb7fab97cea880ea7fe4f341a4dfad14ab48
("grep -w: forward to next possible position after rejected match").

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoapply, fmt-merge-msg: use relative filenames
Stephen Boyd [Sat, 23 May 2009 18:53:11 +0000 (11:53 -0700)]
apply, fmt-merge-msg: use relative filenames

Commit dbd0f5c7 (Files given on the command line are relative to $cwd,
2008-08-06) only fixed git-commit and git-tag. But, git-apply and
git-fmt-merge-msg didn't get the update and exhibit the same behavior.

Fix them and add tests for "apply --build-fake-ancestor" and
"fmt-merge-msg -F".

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agocommit: -F overrides -t
Stephen Boyd [Sat, 23 May 2009 18:53:10 +0000 (11:53 -0700)]
commit: -F overrides -t

Commit dbd0f5c7 (Files given on the command line are relative to $cwd,
2008-08-06) introduced parse_options_fix_filename() as a quick fix for
filename arguments used in the parse options API.

git-commit was still broken. This means

    git commit -F log -t temp

in a subdirectory would make git think the log message should be taken
from temp instead of log.

This is because parse_options_fix_filename() calls prefix_filename()
which uses a single static char buffer to do its work. Making two calls
with two char pointers causes the pointers to alias. To prevent
aliasing, we duplicate the string returned by
parse_options_fix_filename().

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agogrep: fix word-regexp colouring
René Scharfe [Wed, 20 May 2009 21:31:53 +0000 (23:31 +0200)]
grep: fix word-regexp colouring

As noticed by Dmitry Gryazin: When a pattern is found but it doesn't
start and end at word boundaries, bol is forwarded to after the match and
the pattern is searched again.  When a pattern is finally found between
word boundaries, the match offsets are off by the number of characters
that have been skipped.

This patch corrects the offsets to be relative to the value of bol as
passed to match_one_pattern() by its caller.

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agocompletion: use git rev-parse to detect bare repos
Giuseppe Bilotta [Mon, 18 May 2009 16:24:30 +0000 (18:24 +0200)]
completion: use git rev-parse to detect bare repos

Its check is more robust than a config check for core.bare

Trivially-Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoCope better with a _lot_ of packs
Johannes Schindelin [Fri, 15 May 2009 18:52:47 +0000 (20:52 +0200)]
Cope better with a _lot_ of packs

You might end up with a situation where you have tons of pack files, e.g.
when using hg2git.  In this situation, all kinds of operations may
end up with a "too many files open" error.  Let's recover gracefully from
that.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Looks-right-to-me-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agofor-each-ref: fix segfault in copy_email
Jeff King [Mon, 18 May 2009 17:58:11 +0000 (13:58 -0400)]
for-each-ref: fix segfault in copy_email

You can trigger a segfault in git.git by doing:

  git for-each-ref --format='%(taggeremail)' refs/tags/v0.99

The v0.99 tag is special in that it contains no "tagger"
header.

The bug is obvious in copy_email, which carefully checks to
make sure the result of a strchr is non-NULL, but only after
already having used it to perform other work. The fix is to
move the check up.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoshow-branch: Fix die message in parse_reflog_param()
Stephen Boyd [Sun, 17 May 2009 10:47:02 +0000 (03:47 -0700)]
show-branch: Fix die message in parse_reflog_param()

Commit 76a44c5 (show-branch --reflog: show the reflog message at the
top, 2007-01-19) introduced parse_reflog_param(). The die() call was
incorrectly passed arg + 9, when it should have been passed arg.

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agocompletion: add missing options to show-branch and show
Stephen Boyd [Sun, 17 May 2009 03:42:43 +0000 (20:42 -0700)]
completion: add missing options to show-branch and show

Add --oneline and --abbrev-commit to show and --sparse to show-branch.

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agodir.c: clean up handling of 'path' parameter in read_directory_recursive()
Linus Torvalds [Thu, 14 May 2009 20:05:03 +0000 (13:05 -0700)]
dir.c: clean up handling of 'path' parameter in read_directory_recursive()

Right now we pass two different pathnames ('path' and 'base') down to
read_directory_recursive(), and the only real reason for that is that we
want to allow an empty 'base' parameter, but when we do so, we need the
pathname to "opendir()" to be "." rather than the empty string.

And rather than handle that confusion in the caller, we can just fix
read_directory_recursive() to handle the case of an empty path itself,
by just passing opendir() a "." ourselves if the path is empty.

This would allow us to then drop one of the pathnames entirely from the
calling convention, but rather than do that, we'll start separating them
out as a "filesystem pathname" (the one we use for filesystem accesses)
and a "git internal base name" (which is the name that we use for git
internally).

That will eventually allow us to do things like handle different
encodings (eg the filesystem pathnames might be Latin1, while git itself
would use UTF-8 for filename information).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoFix type-punning issues
Dan McGee [Tue, 12 May 2009 01:17:38 +0000 (20:17 -0500)]
Fix type-punning issues

In these two places we are casting part of our unsigned char sha1 array into
an unsigned int, which violates GCCs strict-aliasing rules (and probably
other compilers).

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agotest: checkout shouldn't say that HEAD has moved if it didn't
Nanako Shiraishi [Sun, 17 May 2009 02:43:08 +0000 (11:43 +0900)]
test: checkout shouldn't say that HEAD has moved if it didn't

Signed-off-by: しらいしななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agocompletion: enhance "current branch" display
Junio C Hamano [Sun, 10 May 2009 08:56:21 +0000 (01:56 -0700)]
completion: enhance "current branch" display

Introduce GIT_PS1_DESCRIBE option you can set to "contains", "branch", or
"describe" to tweak the way how a detached HEAD is described.

The default behaviour is to describe only exact match with some tag
(otherwise use the first 7 hexdigits) as before.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agocompletion: simplify "current branch" in __git_ps1()
Junio C Hamano [Sun, 10 May 2009 08:53:19 +0000 (01:53 -0700)]
completion: simplify "current branch" in __git_ps1()

As I very often work on a detached HEAD, I found it pretty confusing
when __git_ps1() said 'some-name'.  Did I create a branch with that name
by mistake, or do I happen to be on a commit with that exact tag?

This patch fixes the issue by enclosing non branch names in a pair of
parentheses when used to substitute %s token in __git_ps1() argument.

It also fixes a small bug where the branch part is left empty when
.git/HEAD is unreadable for whatever reason.  The output now says
"(unknown)".

Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agocompletion: fix PS1 display during a merge on detached HEAD
Junio C Hamano [Sat, 16 May 2009 18:46:22 +0000 (11:46 -0700)]
completion: fix PS1 display during a merge on detached HEAD

If your merge stops in a conflict while on a detached HEAD, recent
completion code fails to show anything.  This was because various cases
added to support the operation-in-progress markers (e.g. REBASE, MERGING)
forgot that they need to set the variable "b" to something for the result
they computed to be displayed at all.

Probably not many people make trial merges on a detached HEAD (which is
tremendously useful feature of git, by the way), and that may be why this
was not noticed for a long time.

Acked-By: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoRevert "git-add--interactive: remove hunk coalescing"
Junio C Hamano [Sat, 16 May 2009 17:48:23 +0000 (10:48 -0700)]
Revert "git-add--interactive: remove hunk coalescing"

This reverts commit 0beee4c6dec15292415e3d56075c16a76a22af54 but with a
bit of twist, as we have added "edit hunk manually" hack and we cannot
rely on the original line numbers of the hunks that were manually edited.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoSplitting a hunk that adds a line at the top fails in "add -p"
Matt Graham [Sat, 16 May 2009 03:10:19 +0000 (23:10 -0400)]
Splitting a hunk that adds a line at the top fails in "add -p"

Splitting a hunk into two in add -p doesn't work for a diff that adds a
new line at the top of the file with other add in the same hunk.

Signed-off-by: Matthew Graham <mdg149@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agobuiltin-checkout: Don't tell user that HEAD has moved before it has
Daniel Cordero [Sat, 16 May 2009 17:54:45 +0000 (10:54 -0700)]
builtin-checkout: Don't tell user that HEAD has moved before it has

Previously, checkout would tell the user this message before moving HEAD,
without regard to whether the upcoming move will result in success.
If the move failed, this causes confusion.

Show the message after the move, unless the move failed.

Signed-off-by: Daniel Cordero <theappleman@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agopre-commit.sample: don't print incidental SHA1
Jim Meyering [Sat, 16 May 2009 10:21:50 +0000 (12:21 +0200)]
pre-commit.sample: don't print incidental SHA1

Make the sample pre-commit hook script discard
all git-rev-parse output, not just stderr.
Otherwise, it would print an SHA1.

Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agotests: Add tests for missing format-patch long options
Stephen Boyd [Sat, 16 May 2009 09:24:45 +0000 (02:24 -0700)]
tests: Add tests for missing format-patch long options

Exercise format-patch's --signoff, --in-reply-to and --start-number long
options.

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoapi-parse-options.txt: use 'func' instead of 'funct'
Stephen Boyd [Sat, 16 May 2009 09:24:44 +0000 (02:24 -0700)]
api-parse-options.txt: use 'func' instead of 'funct'

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoTurn on USE_ST_TIMESPEC for OpenBSD
Tony Kemp [Thu, 14 May 2009 06:47:41 +0000 (16:47 +1000)]
Turn on USE_ST_TIMESPEC for OpenBSD

Like Darwin, OpenBSD's stat struct uses st_ctimespec and st_mtimestruct
rather than st_ctim and st_mtim.

Signed-off-by: Tony Kemp <tony.kemp@newcastle.edu.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
15 years agoMerge branch 'maint-1.6.2' into maint
Junio C Hamano [Sat, 16 May 2009 07:12:58 +0000 (00:12 -0700)]
Merge branch 'maint-1.6.2' into maint

* maint-1.6.2:
  ls-tree manpage: output of ls-tree is compatible with update-index
  ls-tree manpage: use "unless" instead of "when ... is not"