sha1_file.c: resolve confusion EACCES vs EPERM
An earlier commit 916d081 (Nicer error messages in case saving an object
to db goes wrong, 2006-11-09) confused EACCES with EPERM, the latter of
which is an unlikely error from mkstemp().
Signed-off-by: Sam Vilain <sam@vilain.net>
An earlier commit 916d081 (Nicer error messages in case saving an object
to db goes wrong, 2006-11-09) confused EACCES with EPERM, the latter of
which is an unlikely error from mkstemp().
Signed-off-by: Sam Vilain <sam@vilain.net>
sha1_file: avoid bogus "file exists" error message
This avoids the following misleading error message:
error: unable to create temporary sha1 filename ./objects/15: File exists
mkstemp can fail for many reasons, one of which, ENOENT, can occur if
the directory for the temp file doesn't exist. create_tmpfile tried to
handle this case by always trying to mkdir the directory, even if it
already existed. This caused errno to be clobbered, so one cannot tell
why mkstemp really failed, and it truncated the buffer to just the
directory name, resulting in the strange error message shown above.
Note that in both occasions that I've seen this failure, it has not been
due to a missing directory, or bad permissions, but some other, unknown
mkstemp failure mode that did not occur when I ran git again. This code
could perhaps be made more robust by retrying mkstemp, in case it was a
transient failure.
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids the following misleading error message:
error: unable to create temporary sha1 filename ./objects/15: File exists
mkstemp can fail for many reasons, one of which, ENOENT, can occur if
the directory for the temp file doesn't exist. create_tmpfile tried to
handle this case by always trying to mkdir the directory, even if it
already existed. This caused errno to be clobbered, so one cannot tell
why mkstemp really failed, and it truncated the buffer to just the
directory name, resulting in the strange error message shown above.
Note that in both occasions that I've seen this failure, it has not been
due to a missing directory, or bad permissions, but some other, unknown
mkstemp failure mode that did not occur when I ran git again. This code
could perhaps be made more robust by retrying mkstemp, in case it was a
transient failure.
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git checkout: don't warn about unborn branch if -f is already passed
I think it's unnecessary to warn that the checkout has been forced due to an
unborn current branch if -f has been explicitly passed. For one project, I am
using git-new-workdir to create workdirs from a bare repository whose HEAD is
set to an unborn branch, and this warning started to irritate me.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I think it's unnecessary to warn that the checkout has been forced due to an
unborn current branch if -f has been explicitly passed. For one project, I am
using git-new-workdir to create workdirs from a bare repository whose HEAD is
set to an unborn branch, and this warning started to irritate me.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash: offer refs instead of filenames for 'git revert'
The completion script for 'git revert' currently offers options and
filenames. However, 'git revert' doesn't take any filenames from the
command line, but a single commit. Therefore, it's more sane to offer
refs instead.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion script for 'git revert' currently offers options and
filenames. However, 'git revert' doesn't take any filenames from the
command line, but a single commit. Therefore, it's more sane to offer
refs instead.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash: remove dashed command leftovers
Commit 5a625b07 (bash: remove fetch, push, pull dashed form leftovers,
2008-10-03) did that already, but there were still some git-cmd left
here and there.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5a625b07 (bash: remove fetch, push, pull dashed form leftovers,
2008-10-03) did that already, but there were still some git-cmd left
here and there.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'pw/maint-p4' into maint
* pw/maint-p4:
git-p4: fix keyword-expansion regex
* pw/maint-p4:
git-p4: fix keyword-expansion regex
git-p4: fix keyword-expansion regex
This text:
my $dir = $File::Find::dir;
return if ($dir !~ m,$options->{dirpat}$,);
was improperly converted to:
my $dir = $File$dir !~ m,$options->{dirpat}$,);
by the keyword identifier expansion code. Add a \n
to make sure the regex doesn't go across end-of-line
boundaries.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This text:
my $dir = $File::Find::dir;
return if ($dir !~ m,$options->{dirpat}$,);
was improperly converted to:
my $dir = $File$dir !~ m,$options->{dirpat}$,);
by the keyword identifier expansion code. Add a \n
to make sure the regex doesn't go across end-of-line
boundaries.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix typos in the documentation.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'mm/maint-sort-config-doc' into maint
* mm/maint-sort-config-doc:
config.txt: alphabetize configuration sections
* mm/maint-sort-config-doc:
config.txt: alphabetize configuration sections
config.txt: alphabetize configuration sections
I figured the sections might as well be in some order, so I chose alphabetical
but with "core" at the beginning. This should help people add new variables
in the right places.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I figured the sections might as well be in some order, so I chose alphabetical
but with "core" at the beginning. This should help people add new variables
in the right places.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git diff" to honour --[no-]ext-diff
The original intention of 72909be (Add diff-option --ext-diff, 2007-06-30)
was to optionally allow the use of external diff viewer in "git log"
family (while keeping them disabled by default). It exposed the "allow
external diff" bit to the UI, but forgot to adjust the "git diff" codepath
that was set up to always allow use of the external diff viewer.
Noticed by Nazri Ramliy; tests by René Scharfe squashed in.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original intention of 72909be (Add diff-option --ext-diff, 2007-06-30)
was to optionally allow the use of external diff viewer in "git log"
family (while keeping them disabled by default). It exposed the "allow
external diff" bit to the UI, but forgot to adjust the "git diff" codepath
that was set up to always allow use of the external diff viewer.
Noticed by Nazri Ramliy; tests by René Scharfe squashed in.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix misleading wording for git-cherry-pick
Documentation for -n implies that -x is normally
used, however this is no longer true.
Signed-off-by: Bryan Drewery <bryan@shatow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation for -n implies that -x is normally
used, however this is no longer true.
Signed-off-by: Bryan Drewery <bryan@shatow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
request-pull: make usage string match manpage
The usage string of 'git request-pull' differs from he manpage
which gives the correct 'synopsis'.
Signed-off-by: Stefan Naewe <stefan.naewe@atlas-elektronik.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage string of 'git request-pull' differs from he manpage
which gives the correct 'synopsis'.
Signed-off-by: Stefan Naewe <stefan.naewe@atlas-elektronik.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach ls-files --with-tree=<tree> to work with options other than -c
Originally --with-tree=<tree> was designed for the sole purpose of
checking if a given pathspec makes sense as a parameter to git-commit
using it in conjunction with --error-unmatch. It had logic to avoid
showing the same entry (one came from the original index, another from the
overlayed tree) twice so that it works with -c (i.e. "show-cached"), but
otherwise it was not designed to work with the flags such as -m, -d, etc.
This teaches the same logic to cover the codepath for -m and -d.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally --with-tree=<tree> was designed for the sole purpose of
checking if a given pathspec makes sense as a parameter to git-commit
using it in conjunction with --error-unmatch. It had logic to avoid
showing the same entry (one came from the original index, another from the
overlayed tree) twice so that it works with -c (i.e. "show-cached"), but
otherwise it was not designed to work with the flags such as -m, -d, etc.
This teaches the same logic to cover the codepath for -m and -d.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-ls-files.c: coding style fix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: git-svn: fix example for centralized SVN clone
The example that tells users how to centralize the effort of the initial
git svn clone operation doesn't work properly. It uses rebase but that
only works if HEAD exists. This adds one extra command to create a
somewhat sensible HEAD that should work in all cases.
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The example that tells users how to centralize the effort of the initial
git svn clone operation doesn't work properly. It uses rebase but that
only works if HEAD exists. This adds one extra command to create a
somewhat sensible HEAD that should work in all cases.
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: fix links to "everyday.html"
In some places the links are wrong. They should be:
"link:everyday.html", instead of: "linkgit:everyday[7]".
This patch fixes that.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some places the links are wrong. They should be:
"link:everyday.html", instead of: "linkgit:everyday[7]".
This patch fixes that.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
revision.c: use proper data type in call to sizeof() within xrealloc
A type char** was being used instead of char*.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A type char** was being used instead of char*.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
date/time: do not get confused by fractional seconds
The date/time parsing code was confused if the input time HH:MM:SS is
followed by fractional seconds. Since we do not record anything finer
grained than seconds, we could just drop fractional part, but there is a
twist.
We have taught people that not just spaces but dot can be used as word
separators when spelling things like:
$ git log --since 2.days
$ git show @{12:34:56.7.days.ago}
and we shouldn't mistake "7" in the latter example as a fraction and
discard it.
The rules are:
- valid days of month/mday are always single or double digits.
- valid years are either two or four digits
No, we don't support the year 600 _anyway_, since our encoding is based
on the UNIX epoch, and the day we worry about the year 10,000 is far
away and we can raise the limit to five digits when we get closer.
- Other numbers (eg "600 days ago") can have any number of digits, but
they cannot start with a zero. Again, the only exception is for
two-digit numbers, since that is fairly common for dates ("Dec 01" is
not unheard of)
So that means that any milli- or micro-second would be thrown out just
because the number of digits shows that it cannot be an interesting date.
A milli- or micro-second can obviously be a perfectly fine number
according to the rules above, as long as it doesn't start with a '0'. So
if we have
12:34:56.123
then that '123' gets parsed as a number, and we remember it. But because
it's bigger than 31, we'll never use it as such _unless_ there is
something after it to trigger that use.
So you can say "12:34:56.123.days.ago", and because of the "days", that
123 will actually be meaninful now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The date/time parsing code was confused if the input time HH:MM:SS is
followed by fractional seconds. Since we do not record anything finer
grained than seconds, we could just drop fractional part, but there is a
twist.
We have taught people that not just spaces but dot can be used as word
separators when spelling things like:
$ git log --since 2.days
$ git show @{12:34:56.7.days.ago}
and we shouldn't mistake "7" in the latter example as a fraction and
discard it.
The rules are:
- valid days of month/mday are always single or double digits.
- valid years are either two or four digits
No, we don't support the year 600 _anyway_, since our encoding is based
on the UNIX epoch, and the day we worry about the year 10,000 is far
away and we can raise the limit to five digits when we get closer.
- Other numbers (eg "600 days ago") can have any number of digits, but
they cannot start with a zero. Again, the only exception is for
two-digit numbers, since that is fairly common for dates ("Dec 01" is
not unheard of)
So that means that any milli- or micro-second would be thrown out just
because the number of digits shows that it cannot be an interesting date.
A milli- or micro-second can obviously be a perfectly fine number
according to the rules above, as long as it doesn't start with a '0'. So
if we have
12:34:56.123
then that '123' gets parsed as a number, and we remember it. But because
it's bigger than 31, we'll never use it as such _unless_ there is
something after it to trigger that use.
So you can say "12:34:56.123.days.ago", and because of the "days", that
123 will actually be meaninful now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start 1.6.0.5 cycle
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix pack.packSizeLimit and --max-pack-size handling
If the limit was sufficiently low, having a single object written
could bust the limit (by design), but caused the remaining allowed
size to go negative for subsequent objects, which for an unsigned
variable is a rather huge limit.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the limit was sufficiently low, having a single object written
could bust the limit (by design), but caused the remaining allowed
size to go negative for subsequent objects, which for an unsigned
variable is a rather huge limit.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout: Fix "initial checkout" detection
Earlier commit 5521883 (checkout: do not lose staged removal, 2008-09-07)
tightened the rule to prevent switching branches from losing local
changes, so that staged removal of paths can be protected, while
attempting to keep a loophole to still allow a special case of switching
out of an un-checked-out state.
However, the loophole was made a bit too tight, and did not allow
switching from one branch (in an un-checked-out state) to check out
another branch.
The change to builtin-checkout.c in this commit loosens it to allow this,
by not insisting the original commit and the new commit to be the same.
It also introduces a new function, is_index_unborn (and an associated
macro, is_cache_unborn), to check if the repository is truly in an
un-checked-out state more reliably, by making sure that $GIT_INDEX_FILE
did not exist when populating the in-core index structure. A few places
the earlier commit 5521883 added the check for the initial checkout
condition are updated to use this function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier commit 5521883 (checkout: do not lose staged removal, 2008-09-07)
tightened the rule to prevent switching branches from losing local
changes, so that staged removal of paths can be protected, while
attempting to keep a loophole to still allow a special case of switching
out of an un-checked-out state.
However, the loophole was made a bit too tight, and did not allow
switching from one branch (in an un-checked-out state) to check out
another branch.
The change to builtin-checkout.c in this commit loosens it to allow this,
by not insisting the original commit and the new commit to be the same.
It also introduces a new function, is_index_unborn (and an associated
macro, is_cache_unborn), to check if the repository is truly in an
un-checked-out state more reliably, by making sure that $GIT_INDEX_FILE
did not exist when populating the in-core index structure. A few places
the earlier commit 5521883 added the check for the initial checkout
condition are updated to use this function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the period after the git-check-attr summary
The period at the end of the git-check-attr summary causes there to be
two periods after the summary in the git(1) manual page.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The period at the end of the git-check-attr summary causes there to be
two periods after the summary in the git(1) manual page.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix non-literal format in printf-style calls
These were found using gcc 4.3.2-1ubuntu11 with the warning:
warning: format not a string literal and no format arguments
Incorporated suggestions from Brandon Casey <casey@nrlssc.navy.mil>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were found using gcc 4.3.2-1ubuntu11 with the warning:
warning: format not a string literal and no format arguments
Incorporated suggestions from Brandon Casey <casey@nrlssc.navy.mil>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-submodule: Avoid printing a spurious message.
Fix 'git submodule update' to avoid printing a spurious "Maybe you want
to use 'update --init'?" once for every uninitialized submodule it
encounters.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix 'git submodule update' to avoid printing a spurious "Maybe you want
to use 'update --init'?" once for every uninitialized submodule it
encounters.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git ls-remote: make usage string match manpage
The usage string of 'git ls-remote' is pretty terse. The manpage
however gives the correct 'synopsis'.
Signed-off-by: Stefan Naewe <stefan.naewe@atlas-elektronik.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage string of 'git ls-remote' is pretty terse. The manpage
however gives the correct 'synopsis'.
Signed-off-by: Stefan Naewe <stefan.naewe@atlas-elektronik.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: help people who run 'make check' by mistake
The target to run self test is 'make test', but there are people who try
'make check' and worse yet do not have sparse installed.
Suggest 'make test' target when they do not have 'sparse'.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The target to run self test is 'make test', but there are people who try
'make check' and worse yet do not have sparse installed.
Suggest 'make test' target when they do not have 'sparse'.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: bisect: change a few instances of "git-cmd" to "git cmd"
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: rev-list: change a few instances of "git-cmd" to "git cmd"
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout: Don't crash when switching away from an invalid branch.
When using alternates, it is possible for HEAD to end up pointing to
an invalid commit. git checkout should be able to recover from that
situation without crashing.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using alternates, it is possible for HEAD to end up pointing to
an invalid commit. git checkout should be able to recover from that
situation without crashing.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT 1.6.0.4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update RPM spec for the new location of git-cvsserver.
git-cvsserver has been moved from libexecdir to bindir.
Signed-off-by: Quy Tonthat <qtonthat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-cvsserver has been moved from libexecdir to bindir.
Signed-off-by: Quy Tonthat <qtonthat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'cb/maint-update-ref-fix' into maint
* cb/maint-update-ref-fix:
push: fix local refs update if already up-to-date
do not force write of packed refs
* cb/maint-update-ref-fix:
push: fix local refs update if already up-to-date
do not force write of packed refs
Merge branch 'cj/maint-gitpm-fix-maybe-self' into maint
* cj/maint-gitpm-fix-maybe-self:
Git.pm: do not break inheritance
* cj/maint-gitpm-fix-maybe-self:
Git.pm: do not break inheritance
Merge branch 'ar/maint-mksnpath' into maint
* ar/maint-mksnpath:
Use git_pathdup instead of xstrdup(git_path(...))
git_pathdup: returns xstrdup-ed copy of the formatted path
Fix potentially dangerous use of git_path in ref.c
Add git_snpath: a .git path formatting routine with output buffer
Fix potentially dangerous uses of mkpath and git_path
Fix mkpath abuse in dwim_ref and dwim_log of sha1_name.c
Add mksnpath which allows you to specify the output buffer
Conflicts:
builtin-revert.c
rerere.c
* ar/maint-mksnpath:
Use git_pathdup instead of xstrdup(git_path(...))
git_pathdup: returns xstrdup-ed copy of the formatted path
Fix potentially dangerous use of git_path in ref.c
Add git_snpath: a .git path formatting routine with output buffer
Fix potentially dangerous uses of mkpath and git_path
Fix mkpath abuse in dwim_ref and dwim_log of sha1_name.c
Add mksnpath which allows you to specify the output buffer
Conflicts:
builtin-revert.c
rerere.c
Merge branch 'mv/maint-branch-m-symref' into maint
* mv/maint-branch-m-symref:
update-ref --no-deref -d: handle the case when the pointed ref is packed
git branch -m: forbid renaming of a symref
Fix git update-ref --no-deref -d.
rename_ref(): handle the case when the reflog of a ref does not exist
Fix git branch -m for symrefs.
* mv/maint-branch-m-symref:
update-ref --no-deref -d: handle the case when the pointed ref is packed
git branch -m: forbid renaming of a symref
Fix git update-ref --no-deref -d.
rename_ref(): handle the case when the reflog of a ref does not exist
Fix git branch -m for symrefs.
push: fix local refs update if already up-to-date
git push normally updates local refs only after a successful push. If the
remote already has the updates -- pushed indirectly through another repository,
for example -- we forget to update local tracking refs.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git push normally updates local refs only after a successful push. If the
remote already has the updates -- pushed indirectly through another repository,
for example -- we forget to update local tracking refs.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
do not force write of packed refs
We force writing a ref if it does not exist. Originally, we only had to look
for the ref file to check if it existed. Now we have to look for a packed ref
as well. Luckily, resolve_ref already does all the work for us.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We force writing a ref if it does not exist. Originally, we only had to look
for the ref file to check if it existed. Now we have to look for a packed ref
as well. Luckily, resolve_ref already does all the work for us.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
format-patch documentation: mention the special case of showing a single commit
Even long timers seem to have missed that "format-patch -1 $commit" is a
much simpler and more obvious way to say "format-patch $commit^..$commit"
from the current documentation (and an example "format-patch -3 $commit"
to get three patches). Add an explicit instruction in a much earlier part
of the documentation to make it easier to find.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even long timers seem to have missed that "format-patch -1 $commit" is a
much simpler and more obvious way to say "format-patch $commit^..$commit"
from the current documentation (and an example "format-patch -3 $commit"
to get three patches). Add an explicit instruction in a much earlier part
of the documentation to make it easier to find.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add reference for status letters in documentation.
Also fix error in diff_filepair::status documentation, and point to
the in-code reference as well as the doc.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also fix error in diff_filepair::status documentation, and point to
the in-code reference as well as the doc.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that git-log takes --all-match.
Signed-off-by: Mikael Magnusson <mikachu@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Mikael Magnusson <mikachu@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update draft 1.6.0.4 release notes
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'js/maint-fetch-update-head' into maint
* js/maint-fetch-update-head:
pull: allow "git pull origin $something:$current_branch" into an unborn branch
Fix fetch/pull when run without --update-head-ok
* js/maint-fetch-update-head:
pull: allow "git pull origin $something:$current_branch" into an unborn branch
Fix fetch/pull when run without --update-head-ok
Merge branch 'jk/maint-ls-files-other' into maint
* jk/maint-ls-files-other:
refactor handling of "other" files in ls-files and status
* jk/maint-ls-files-other:
refactor handling of "other" files in ls-files and status
Merge branch 'jc/maint-reset-remove-unmerged-new' into maint
* jc/maint-reset-remove-unmerged-new:
reset --hard/read-tree --reset -u: remove unmerged new paths
* jc/maint-reset-remove-unmerged-new:
reset --hard/read-tree --reset -u: remove unmerged new paths
Merge branch 'jc/maint-co-track' into maint
* jc/maint-co-track:
Enhance hold_lock_file_for_{update,append}() API
demonstrate breakage of detached checkout with symbolic link HEAD
Fix "checkout --track -b newbranch" on detached HEAD
* jc/maint-co-track:
Enhance hold_lock_file_for_{update,append}() API
demonstrate breakage of detached checkout with symbolic link HEAD
Fix "checkout --track -b newbranch" on detached HEAD
Start 1.6.0.4 cycle
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
add instructions on how to send patches to the mailing list with Gmail
Gmail is one of the most popular email providers in the world. Now that Gmail
supports IMAP, sending properly formatted patches via `git imap-send` is
trivial. This section in SubmittingPatches explains how to do so.
Signed-off-by: Tom Preston-Werner <tom@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gmail is one of the most popular email providers in the world. Now that Gmail
supports IMAP, sending properly formatted patches via `git imap-send` is
trivial. This section in SubmittingPatches explains how to do so.
Signed-off-by: Tom Preston-Werner <tom@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/gitattributes: Add subsection header for each attribute
This makes attributes easier to find; before this patch some
attributes had individual subsections, and some didn't.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes attributes easier to find; before this patch some
attributes had individual subsections, and some didn't.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git send-email: avoid leaking directory file descriptors.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-pack: do not send out single-level refs such as refs/stash
Since no version of receive-pack accepts these "funny refs", we should
mirror the check when considering the list of refs to send. IOW, don't
even make them eligible for matching or mirroring.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since no version of receive-pack accepts these "funny refs", we should
mirror the check when considering the list of refs to send. IOW, don't
even make them eligible for matching or mirroring.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fix overlapping memcpy in normalize_absolute_path
The comments for normalize_absolute_path explicitly claim
that the source and destination buffers may be the same
(though they may not otherwise overlap). Thus the call to
memcpy may involve copying overlapping data, and memmove
should be used instead.
This fixes a valgrind error in t1504.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comments for normalize_absolute_path explicitly claim
that the source and destination buffers may be the same
(though they may not otherwise overlap). Thus the call to
memcpy may involve copying overlapping data, and memmove
should be used instead.
This fixes a valgrind error in t1504.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: avoid reading uninitalized data
In the main loop of find_deltas, we do:
struct object_entry *entry = *list++;
...
if (!*list_size)
...
break
Because we look at and increment *list _before_ the check of
list_size, in the very last iteration of the loop we will
look at uninitialized data, and increment the pointer beyond
one past the end of the allocated space. Since we don't
actually do anything with the data until after the check,
this is not a problem in practice.
But since it technically violates the C standard, and
because it provokes a spurious valgrind warning, let's just
move the initialization of entry to a safe place.
This fixes valgrind errors in t5300, t5301, t5302, t303, and
t9400.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the main loop of find_deltas, we do:
struct object_entry *entry = *list++;
...
if (!*list_size)
...
break
Because we look at and increment *list _before_ the check of
list_size, in the very last iteration of the loop we will
look at uninitialized data, and increment the pointer beyond
one past the end of the allocated space. Since we don't
actually do anything with the data until after the check,
this is not a problem in practice.
But since it technically violates the C standard, and
because it provokes a spurious valgrind warning, let's just
move the initialization of entry to a safe place.
This fixes valgrind errors in t5300, t5301, t5302, t303, and
t9400.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
correct cache_entry allocation
Most cache_entry structs are allocated by using the
cache_entry_size macro, which rounds the size of the struct
up to the nearest multiple of 8 bytes (presumably to avoid
memory fragmentation).
There is one exception: the special "conflict entry" is
allocated with an empty name, and so is explicitly given
just one extra byte to hold the NUL.
However, later code doesn't realize that this particular
struct has been allocated differently, and happily tries
reading and copying it based on the ce_size macro, which
assumes the 8-byte alignment.
This can lead to reading uninitalized data, though since
that data is simply padding, there shouldn't be any problem
as a result. Still, it makes sense to hold the padding
assumption so as not to surprise later maintainers.
This fixes valgrind errors in t1005, t3030, t4002, and
t4114.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most cache_entry structs are allocated by using the
cache_entry_size macro, which rounds the size of the struct
up to the nearest multiple of 8 bytes (presumably to avoid
memory fragmentation).
There is one exception: the special "conflict entry" is
allocated with an empty name, and so is explicitly given
just one extra byte to hold the NUL.
However, later code doesn't realize that this particular
struct has been allocated differently, and happily tries
reading and copying it based on the ce_size macro, which
assumes the 8-byte alignment.
This can lead to reading uninitalized data, though since
that data is simply padding, there shouldn't be any problem
as a result. Still, it makes sense to hold the padding
assumption so as not to surprise later maintainers.
This fixes valgrind errors in t1005, t3030, t4002, and
t4114.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint' of git://repo.or.cz/git-gui into maint
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Help identify aspell version on Windows too
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Help identify aspell version on Windows too
update-ref --no-deref -d: handle the case when the pointed ref is packed
In this case we did nothing in the past, but we should delete the
reference in fact.
The problem was that when the symref is not packed but the referenced
ref is packed, then we assumed that the symref is packed as well, but
symrefs are never packed.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this case we did nothing in the past, but we should delete the
reference in fact.
The problem was that when the symref is not packed but the referenced
ref is packed, then we assumed that the symref is packed as well, but
symrefs are never packed.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: change dashed git-commit-tree to git commit-tree
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: clarify information about 'ident' attribute
The documentation spoke of the attribute being set "to" a path; this can
mistakenly be interpreted as "the attribute needs to have its value set to
some kind of path". This clarifies things.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation spoke of the attribute being set "to" a path; this can
mistakenly be interpreted as "the attribute needs to have its value set to
some kind of path". This clarifies things.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash completion: add doubledash to "git show"
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test-chmtime -v instead of perl in t5000 to get mtime of a file
The test was broken on admittedly broken combination of Windows, Cygwin,
and ActiveState Perl.
Signed-off-by: Alex Riesen <ariesen@harmanbecker.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test was broken on admittedly broken combination of Windows, Cygwin,
and ActiveState Perl.
Signed-off-by: Alex Riesen <ariesen@harmanbecker.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --verbose|-v to test-chmtime
This allows us replace perl when getting the mtime of a file because
of time zone conversions, though at the moment only one platform which
does this has been identified: Cygwin when used with ActiveState Perl
(as usual).
The output format is:
<mtime1> TAB <filename1> <LF>
<mtime2> TAB <filename2> <LF>
...
which, if only mtime is needed can be parsed with cut(1):
test-chmtime -v +0 filename1 | cut -f 1
Also, the change adds a description of programs features, with examples.
Signed-off-by: Alex Riesen <ariesen@harmanbecker.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us replace perl when getting the mtime of a file because
of time zone conversions, though at the moment only one platform which
does this has been identified: Cygwin when used with ActiveState Perl
(as usual).
The output format is:
<mtime1> TAB <filename1> <LF>
<mtime2> TAB <filename2> <LF>
...
which, if only mtime is needed can be parsed with cut(1):
test-chmtime -v +0 filename1 | cut -f 1
Also, the change adds a description of programs features, with examples.
Signed-off-by: Alex Riesen <ariesen@harmanbecker.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
asciidoc: add minor workaround to add an empty line after code blocks
Insert an empty <simpara> in manpages after code blocks to force and
empty line.
The problem can be seen on the manpage for the git tutorial, where an
example command and the following paragraph is printed with no empty
line between them:
First, note that you can get documentation for a command such as git
log --graph with:
$ man git-log
It is a good idea to introduce yourself to git [...]
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Insert an empty <simpara> in manpages after code blocks to force and
empty line.
The problem can be seen on the manpage for the git tutorial, where an
example command and the following paragraph is printed with no empty
line between them:
First, note that you can get documentation for a command such as git
log --graph with:
$ man git-log
It is a good idea to introduce yourself to git [...]
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use git_pathdup instead of xstrdup(git_path(...))
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_pathdup: returns xstrdup-ed copy of the formatted path
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix potentially dangerous use of git_path in ref.c
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add git_snpath: a .git path formatting routine with output buffer
The function's purpose is to replace git_path where the buffer of
formatted path may not be reused by subsequent calls of the function
or will be copied anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function's purpose is to replace git_path where the buffer of
formatted path may not be reused by subsequent calls of the function
or will be copied anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug a memleak in builtin-revert
Probably happened when working around git_path's problem with returned
buffer being reused.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Probably happened when working around git_path's problem with returned
buffer being reused.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git branch -m: forbid renaming of a symref
There may be cases where one would really want to rename the symbolic
ref without changing its value, but "git branch -m" is not such a
use-case.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There may be cases where one would really want to rename the symbolic
ref without changing its value, but "git branch -m" is not such a
use-case.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add file delete/create info when we overflow rename_limit
When we refuse to do rename detection due to having too many files
created or deleted, let the user know the numbers. That way there is a
reasonable starting point for setting the diff.renamelimit option.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we refuse to do rename detection due to having too many files
created or deleted, let the user know the numbers. That way there is a
reasonable starting point for setting the diff.renamelimit option.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Install git-cvsserver in $(bindir)
It is one of the server side programs and needs to be found on usual $PATH.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is one of the server side programs and needs to be found on usual $PATH.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Install git-shell in bindir, too
/etc/passwd shell field must be something execable, you can't enter
"/usr/bin/git shell" there. git-shell must be present as a separate
executable, or it is useless.
Signed-off-by: Tommi Virtanen <tv@eagain.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
/etc/passwd shell field must be something execable, you can't enter
"/usr/bin/git shell" there. git-shell must be present as a separate
executable, or it is useless.
Signed-off-by: Tommi Virtanen <tv@eagain.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix potentially dangerous uses of mkpath and git_path
Replace them with mksnpath/git_snpath and a local buffer
for the resulting string.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace them with mksnpath/git_snpath and a local buffer
for the resulting string.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix mkpath abuse in dwim_ref and dwim_log of sha1_name.c
Otherwise the function sometimes fail to resolve obviously correct
refnames, because the string data pointed to by "str" argument were
reused.
The change in dwim_log does not fix anything, just optimizes away
strcpy code as the path can be created directly in the available
buffer.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the function sometimes fail to resolve obviously correct
refnames, because the string data pointed to by "str" argument were
reused.
The change in dwim_log does not fix anything, just optimizes away
strcpy code as the path can be created directly in the available
buffer.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add mksnpath which allows you to specify the output buffer
This is just vsnprintf's but additionally calls cleanup_path() on the
result. To be used as alternatives to mkpath() where the buffer for the
created path may not be reused by subsequent calls of the same formatting
function.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just vsnprintf's but additionally calls cleanup_path() on the
result. To be used as alternatives to mkpath() where the buffer for the
created path may not be reused by subsequent calls of the same formatting
function.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
add -p: warn if only binary changes present
Current 'git add -p' will say "No changes." if there are no changes to
text files, which can be confusing if there _are_ changes to binary
files. Add some code to distinguish the two cases, and give a
different message in the latter one.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current 'git add -p' will say "No changes." if there are no changes to
text files, which can be confusing if there _are_ changes to binary
files. Add some code to distinguish the two cases, and give a
different message in the latter one.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-archive: work in bare repos
This moves the call to git_config to a place where it doesn't break the
logic for using git archive in a bare repository but retains the fix to
make git archive respect core.autocrlf.
Tests are by René Scharfe.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Tested-by: Deskin Miller <deskinm@umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the call to git_config to a place where it doesn't break the
logic for using git archive in a bare repository but retains the fix to
make git archive respect core.autocrlf.
Tests are by René Scharfe.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Tested-by: Deskin Miller <deskinm@umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix git update-ref --no-deref -d.
Till now --no-deref was just ignored when deleting refs, fix this.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Till now --no-deref was just ignored when deleting refs, fix this.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rename_ref(): handle the case when the reflog of a ref does not exist
We tried to check if a reflog of a ref is a symlink without first
checking if it exists, which is a bug.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We tried to check if a reflog of a ref is a symlink without first
checking if it exists, which is a bug.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix git branch -m for symrefs.
This had two problems with symrefs. First, it copied the actual sha1
instead of the "pointer", second it failed to remove the old ref after a
successful rename.
Given that till now delete_ref() always dereferenced symrefs, a new
parameters has been introduced to delete_ref() to allow deleting refs
without a dereference.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This had two problems with symrefs. First, it copied the actual sha1
instead of the "pointer", second it failed to remove the old ref after a
successful rename.
Given that till now delete_ref() always dereferenced symrefs, a new
parameters has been introduced to delete_ref() to allow deleting refs
without a dereference.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: change dashed git-config to git config
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT 1.6.0.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rehabilitate 'git index-pack' inside the object store
Before commit d0b92a3f6e it was possible to run 'git index-pack'
directly in the .git/objects/pack/ directory. Restore that ability.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before commit d0b92a3f6e it was possible to run 'git index-pack'
directly in the .git/objects/pack/ directory. Restore that ability.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix testcase failure when extended attributes are in use
06cbe855 (Make core.sharedRepository more generic, 2008-04-16) made
several testcases in t1301-shared-repo.sh which fail if on a system
which creates files with extended attributes (e.g. SELinux), since ls
appends a '+' sign to the permission set in such cases. In fact,
POSIX.1 allows ls to add a single printable character after the usual
3x3 permission bits to show that an optional alternate/additional access
method is associated with the path.
This fixes the testcase to strip any such sign prior to verifying the
permission set.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tested-by: Deskin Miller <deskinm@umich.edu>
06cbe855 (Make core.sharedRepository more generic, 2008-04-16) made
several testcases in t1301-shared-repo.sh which fail if on a system
which creates files with extended attributes (e.g. SELinux), since ls
appends a '+' sign to the permission set in such cases. In fact,
POSIX.1 allows ls to add a single printable character after the usual
3x3 permission bits to show that an optional alternate/additional access
method is associated with the path.
This fixes the testcase to strip any such sign prior to verifying the
permission set.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tested-by: Deskin Miller <deskinm@umich.edu>
Git.pm: do not break inheritance
Make it possible to write subclasses of Git.pm
Signed-off-by: Christian Jaeger <christian@jaeger.mine.nu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it possible to write subclasses of Git.pm
Signed-off-by: Christian Jaeger <christian@jaeger.mine.nu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance hold_lock_file_for_{update,append}() API
This changes the "die_on_error" boolean parameter to a mere "flags", and
changes the existing callers of hold_lock_file_for_update/append()
functions to pass LOCK_DIE_ON_ERROR.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the "die_on_error" boolean parameter to a mere "flags", and
changes the existing callers of hold_lock_file_for_update/append()
functions to pass LOCK_DIE_ON_ERROR.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
demonstrate breakage of detached checkout with symbolic link HEAD
When core.prefersymlinkrefs is in use, detaching the HEAD by
checkout incorrectly clobbers the tip of the current branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.prefersymlinkrefs is in use, detaching the HEAD by
checkout incorrectly clobbers the tip of the current branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: Clarify '--signoff' for git-commit
'--signoff' uses commiter name always to add the signoff line,
make it explicit in the documentation.
Signed-off-by: Abhijit Bhopatkar <bain@devslashzero.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'--signoff' uses commiter name always to add the signoff line,
make it explicit in the documentation.
Signed-off-by: Abhijit Bhopatkar <bain@devslashzero.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
reset --hard/read-tree --reset -u: remove unmerged new paths
When aborting a failed merge that has brought in a new path using "git
reset --hard" or "git read-tree --reset -u", we used to first forget about
the new path (via read_cache_unmerged) and then matched the working tree
to what is recorded in the index, thus ending up leaving the new path in
the work tree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When aborting a failed merge that has brought in a new path using "git
reset --hard" or "git read-tree --reset -u", we used to first forget about
the new path (via read_cache_unmerged) and then matched the working tree
to what is recorded in the index, thus ending up leaving the new path in
the work tree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hopefully the final draft release notes update before 1.6.0.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff(1): clarify what "T"ypechange status means
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'db/maint-checkout-b' into maint
* db/maint-checkout-b:
Check early that a new branch is new and valid
* db/maint-checkout-b:
Check early that a new branch is new and valid
contrib: update packinfo.pl to not use dashed commands
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
force_object_loose: Fix memory leak
read_packed_sha1 expectes its caller to free the buffer it returns, which
force_object_loose didn't do.
This leak is eventually triggered by "git gc", when it is manually invoked
or there are too many packs around, making gc totally unusable when there
are lots of unreachable objects.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_packed_sha1 expectes its caller to free the buffer it returns, which
force_object_loose didn't do.
This leak is eventually triggered by "git gc", when it is manually invoked
or there are too many packs around, making gc totally unusable when there
are lots of unreachable objects.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix "checkout --track -b newbranch" on detached HEAD
The test to make sure that checkout fails when --track was asked for and
we cannot set up tracking information in t7201 was wrong, and it turns out
that the implementation for that feature itself was buggy. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test to make sure that checkout fails when --track was asked for and
we cannot set up tracking information in t7201 was wrong, and it turns out
that the implementation for that feature itself was buggy. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
refactor handling of "other" files in ls-files and status
When the "git status" display code was originally converted
to C, we copied the code from ls-files to discover whether a
pathname returned by read_directory was an "other", or
untracked, file.
Much later, 5698454e updated the code in ls-files to handle
some new cases caused by gitlinks. This left the code in
wt-status.c broken: it would display submodule directories
as untracked directories. Nobody noticed until now, however,
because unless status.showUntrackedFiles was set to "all",
submodule directories were not actually reported by
read_directory. So the bug was only triggered in the
presence of a submodule _and_ this config option.
This patch pulls the ls-files code into a new function,
cache_name_is_other, and uses it in both places. This should
leave the ls-files functionality the same and fix the bug
in status.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "git status" display code was originally converted
to C, we copied the code from ls-files to discover whether a
pathname returned by read_directory was an "other", or
untracked, file.
Much later, 5698454e updated the code in ls-files to handle
some new cases caused by gitlinks. This left the code in
wt-status.c broken: it would display submodule directories
as untracked directories. Nobody noticed until now, however,
because unless status.showUntrackedFiles was set to "all",
submodule directories were not actually reported by
read_directory. So the bug was only triggered in the
presence of a submodule _and_ this config option.
This patch pulls the ls-files code into a new function,
cache_name_is_other, and uses it in both places. This should
leave the ls-files functionality the same and fix the bug
in status.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: shell negation portability fix
Commit 969c8775 introduced a test which uses the non-portable construct:
command1 && ! command2 | command3
which must be
command1 && ! (command2 | command3)
to work on bsd shells (this is another example of bbf08124, which fixed
several similar cases).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 969c8775 introduced a test which uses the non-portable construct:
command1 && ! command2 | command3
which must be
command1 && ! (command2 | command3)
to work on bsd shells (this is another example of bbf08124, which fixed
several similar cases).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pull: allow "git pull origin $something:$current_branch" into an unborn branch
Some misguided documents floating on the Net suggest this sequence:
mkdir newdir && cd newdir
git init
git remote add origin $url
git pull origin master:master
"git pull" has known about misguided "pull" that lets the underlying fetch
update the current branch for a long time. It also has known about
"git pull origin master" into a branch yet to be born.
These two workarounds however were not aware of the existence of each
other and did not work well together. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some misguided documents floating on the Net suggest this sequence:
mkdir newdir && cd newdir
git init
git remote add origin $url
git pull origin master:master
"git pull" has known about misguided "pull" that lets the underlying fetch
update the current branch for a long time. It also has known about
"git pull origin master" into a branch yet to be born.
These two workarounds however were not aware of the existence of each
other and did not work well together. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t1301-shared-repo.sh: don't let a default ACL interfere with the test
This test creates files with several different umasks and expects their
permissions to be initialized according to the umask, so a default ACL on the
trash directory (which overrides the umask for files created in that directory)
causes the test to fail. To avoid that, remove the default ACL if possible with
setfacl(1).
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test creates files with several different umasks and expects their
permissions to be initialized according to the umask, so a default ACL on the
trash directory (which overrides the umask for files created in that directory)
causes the test to fail. To avoid that, remove the default ACL if possible with
setfacl(1).
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-check-attr(1): add output and example sections
Plumbing tools should document what output can be expected.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plumbing tools should document what output can be expected.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xdiff-interface.c: strip newline (and cr) from line before pattern matching
POSIX doth sayeth:
"In the regular expression processing described in IEEE Std 1003.1-2001,
the <newline> is regarded as an ordinary character and both a period and
a non-matching list can match one. ... Those utilities (like grep) that
do not allow <newline>s to match are responsible for eliminating any
<newline> from strings before matching against the RE."
Thus far git has not been removing the trailing newline from strings matched
against regular expression patterns. This has the effect that (quoting
Jonathan del Strother) "... a line containing just 'FUNCNAME' (terminated by
a newline) will be matched by the pattern '^(FUNCNAME.$)' but not
'^(FUNCNAME$)'", and more simply not '^FUNCNAME$'.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
POSIX doth sayeth:
"In the regular expression processing described in IEEE Std 1003.1-2001,
the <newline> is regarded as an ordinary character and both a period and
a non-matching list can match one. ... Those utilities (like grep) that
do not allow <newline>s to match are responsible for eliminating any
<newline> from strings before matching against the RE."
Thus far git has not been removing the trailing newline from strings matched
against regular expression patterns. This has the effect that (quoting
Jonathan del Strother) "... a line containing just 'FUNCNAME' (terminated by
a newline) will be matched by the pattern '^(FUNCNAME.$)' but not
'^(FUNCNAME$)'", and more simply not '^FUNCNAME$'.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>