mailinfo: do not get confused with logical lines that are too long.
It basically considers all the continuation lines to be lines of their
own, and if the total line is bigger than what we can fit in it, we just
truncate the result rather than stop in the middle and then get confused
when we try to parse the "next" line (which is just the remainder of the
first line).
[jc: added test, and tightened boundary a bit per list discussion.]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It basically considers all the continuation lines to be lines of their
own, and if the total line is bigger than what we can fit in it, we just
truncate the result rather than stop in the middle and then get confused
when we try to parse the "next" line (which is just the remainder of the
first line).
[jc: added test, and tightened boundary a bit per list discussion.]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
GIT 1.5.0.2
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-remote: support remotes with a dot in the name
[jc: the original from Pavel was limiting the variable names to only
fetch and url, but I loosened it to take valid variable names.]
[jc: cherry-picked from 'master', since people seem to be reinventing
this many times.]
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: the original from Pavel was limiting the variable names to only
fetch and url, but I loosened it to take valid variable names.]
[jc: cherry-picked from 'master', since people seem to be reinventing
this many times.]
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation: describe "-f/-t/-m" options to "git-remote add"
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff --cc: fix display of symlink conflicts during a merge.
"git-diff-files --cc" to show conflicts during merge did not pass
the correct mode information for the working tree down, and showed
bogus combined diff.
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git-diff-files --cc" to show conflicts during merge did not pass
the correct mode information for the working tree down, and showed
bogus combined diff.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'jc/merge-symlink' into maint
* jc/merge-symlink:
merge-recursive: fix longstanding bug in merging symlinks
merge-index: fix longstanding bug in merging symlinks
* jc/merge-symlink:
merge-recursive: fix longstanding bug in merging symlinks
merge-index: fix longstanding bug in merging symlinks
merge-recursive: fix longstanding bug in merging symlinks
Commit 3af244ca added unlink(2) before running symlink(2) to
update the working tree with the merge result, but it was
unlinking a wrong path. This resulted in loss of the path
pointed by a symlink.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Commit 3af244ca added unlink(2) before running symlink(2) to
update the working tree with the merge result, but it was
unlinking a wrong path. This resulted in loss of the path
pointed by a symlink.
Signed-off-by: Junio C Hamano <junkio@cox.net>
merge-index: fix longstanding bug in merging symlinks
Ancient commit e2b6a9d0 added code to pass "file modes" from
merge-index to merge-one-file, and then later commit 54dd99a1
wanted to make sure we do not end up creating a nonsense symlink
that points at a path whose name contains conflict markers.
However, nobody noticed that the code in merge-index added by
e2b6a9d0 were stripping the S_IFMT bits and the code in 54dd99a1
was meaningless. This fixes it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Ancient commit e2b6a9d0 added code to pass "file modes" from
merge-index to merge-one-file, and then later commit 54dd99a1
wanted to make sure we do not end up creating a nonsense symlink
that points at a path whose name contains conflict markers.
However, nobody noticed that the code in merge-index added by
e2b6a9d0 were stripping the S_IFMT bits and the code in 54dd99a1
was meaningless. This fixes it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add Release Notes to prepare for 1.5.0.2
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow arbitrary number of arguments to git-pack-objects
If a repository ever gets in a situation where there are too many
packs (more than 60 or so), perhaps because of frequent use of
git-fetch -k or incremental git-repack, then it becomes impossible to
fully repack the repository with git-repack -a. That command just
dies with the cryptic message
fatal: too many internal rev-list options
This message comes from git-pack-objects, which is passed one command
line option like --unpacked=pack-<SHA1>.pack for each pack file to be
repacked. However, the current code has a static limit of 64 command
line arguments and just aborts if more arguments are passed to it.
Fix this by dynamically allocating the array of command line
arguments, and doubling the size each time it overflows.
Signed-off-by: Roland Dreier <roland@digitalvampire.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If a repository ever gets in a situation where there are too many
packs (more than 60 or so), perhaps because of frequent use of
git-fetch -k or incremental git-repack, then it becomes impossible to
fully repack the repository with git-repack -a. That command just
dies with the cryptic message
fatal: too many internal rev-list options
This message comes from git-pack-objects, which is passed one command
line option like --unpacked=pack-<SHA1>.pack for each pack file to be
repacked. However, the current code has a static limit of 64 command
line arguments and just aborts if more arguments are passed to it.
Fix this by dynamically allocating the array of command line
arguments, and doubling the size each time it overflows.
Signed-off-by: Roland Dreier <roland@digitalvampire.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
rerere: do not deal with symlinks.
Who would use multi-line symlinks that would benefit from rerere?
Just ignore them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Who would use multi-line symlinks that would benefit from rerere?
Just ignore them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
rerere: do not skip two conflicted paths next to each other.
The code forgot to take the for (;;) loop control into account,
incrementing the index once too many.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The code forgot to take the for (;;) loop control into account,
incrementing the index once too many.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge git://repo.or.cz/git-gui into maint
* git://repo.or.cz/git-gui:
Don't modify CREDITS-FILE if it hasn't changed.
* git://repo.or.cz/git-gui:
Don't modify CREDITS-FILE if it hasn't changed.
Don't modify CREDITS-FILE if it hasn't changed.
We should always avoid rewriting a built file during `make install`
if nothing has changed since `make all`. This is to help support
the typical installation process of compiling a package as yourself,
then installing it as root.
Forcing CREDITS-FILE to be always be rebuilt in the Makefile means
that CREDITS-GEN needs to check for a change and only update
CREDITS-FILE if the file content actually differs. After all,
content is king in Git.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We should always avoid rewriting a built file during `make install`
if nothing has changed since `make all`. This is to help support
the typical installation process of compiling a package as yourself,
then installing it as root.
Forcing CREDITS-FILE to be always be rebuilt in the Makefile means
that CREDITS-GEN needs to check for a change and only update
CREDITS-FILE if the file content actually differs. After all,
content is king in Git.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
diff-patch: Avoid emitting double-slashes in textual patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Reword git-am 3-way fallback failure message.
When the blobs recorded on the index lines in the patch as pre-image
blobs are not found in the repository, "git-am" punted saying
that the index line does not record anything useful. This was not
clear enough -- the index line does have something useful but the
problem was that it was not useful in _that_ repository.
Reword the message as Francis Moreau suggests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When the blobs recorded on the index lines in the patch as pre-image
blobs are not found in the repository, "git-am" punted saying
that the index line does not record anything useful. This was not
clear enough -- the index line does have something useful but the
problem was that it was not useful in _that_ repository.
Reword the message as Francis Moreau suggests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Limit filename for format-patch
Badly formatted commits may have very long comments. This causes
git-format-patch to fail. To avoid that, truncate the filename
to a value we believe will always work.
Err out if the patch file cannot be created.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Badly formatted commits may have very long comments. This causes
git-format-patch to fail. To avoid that, truncate the filename
to a value we believe will always work.
Err out if the patch file cannot be created.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
core.legacyheaders: Use the description used in RelNotes-1.5.0
It explains what it does and why, and says how to use the new format.
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It explains what it does and why, and says how to use the new format.
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-show-ref --verify: Fail if called without a reference
builtin-show-ref.c (cmd_show_ref): Fail if called with --verify option but
without a reference.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
builtin-show-ref.c (cmd_show_ref): Fail if called with --verify option but
without a reference.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-diff: fix combined diff
The code forgets that typecast binds tighter than addition, in
other words:
(cast *)array + i === ((cast *)array) + i
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The code forgets that typecast binds tighter than addition, in
other words:
(cast *)array + i === ((cast *)array) + i
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix 'git commit -a' in a newly initialized repository
With current git:
$ git init
$ git commit -a
cp: cannot stat `.git/index': No such file or directory
Output a nice error message instead.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With current git:
$ git init
$ git commit -a
cp: cannot stat `.git/index': No such file or directory
Output a nice error message instead.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Include git-gui credits file in dist.
The Makefile for the git-gui subproject will fail to execute if run
outside of a git.git directory, such as when building from a .tar.gz
or .tar.bz2. This is because it is looking for the credits file,
which was created but omitted from the tarball by the toplevel
Makefile.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The Makefile for the git-gui subproject will fail to execute if run
outside of a git.git directory, such as when building from a .tar.gz
or .tar.bz2. This is because it is looking for the credits file,
which was created but omitted from the tarball by the toplevel
Makefile.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document the new core.bare configuration option.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'master' of git://repo.or.cz/git-gui into maint
* 'master' of git://repo.or.cz/git-gui:
git-gui: Don't crash in citool mode on initial commit.
git-gui: Remove TODO list.
git-gui: Include browser in our usage message.
git-gui: Change summary of git-gui.
git-gui: Display all authors of git-gui.
git-gui: Use mixed path for docs on Cygwin.
git-gui: Correct crash when saving options in blame mode.
git-gui: Expose the browser as a subcommand.
git-gui: Create new branches from a tag.
git-gui: Prefer version file over git-describe.
git-gui: Print version on the console.
git-gui: More consistently display the application name.
git-gui: Permit merging tags into the current branch.
git-gui: Basic version check to ensure git 1.5.0 or later is used.
git-gui: Refactor 'exec git subcmd' idiom.
* 'master' of git://repo.or.cz/git-gui:
git-gui: Don't crash in citool mode on initial commit.
git-gui: Remove TODO list.
git-gui: Include browser in our usage message.
git-gui: Change summary of git-gui.
git-gui: Display all authors of git-gui.
git-gui: Use mixed path for docs on Cygwin.
git-gui: Correct crash when saving options in blame mode.
git-gui: Expose the browser as a subcommand.
git-gui: Create new branches from a tag.
git-gui: Prefer version file over git-describe.
git-gui: Print version on the console.
git-gui: More consistently display the application name.
git-gui: Permit merging tags into the current branch.
git-gui: Basic version check to ensure git 1.5.0 or later is used.
git-gui: Refactor 'exec git subcmd' idiom.
Use gunzip -c over gzcat in import-tars example.
Not everyone has gzcat or bzcat installed on their system, but
gunzip -c and bunzip2 -c perform the same task and are available
if the user has installed gzip support or bzip2 support.
Signed-off-by: Michael Loeffler <zvpunry@zvpunry.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Not everyone has gzcat or bzcat installed on their system, but
gunzip -c and bunzip2 -c perform the same task and are available
if the user has installed gzip support or bzip2 support.
Signed-off-by: Michael Loeffler <zvpunry@zvpunry.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Don't crash in citool mode on initial commit.
Attempting to use `git citool` to create an initial commit caused
git-gui to crash with a Tcl error as it tried to add the newly
born branch to the non-existant branch menu. Moving this code
to after the normal commit cleanup logic resolves the issue, as
we only have a branch menu if we are not in singlecommit mode.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Attempting to use `git citool` to create an initial commit caused
git-gui to crash with a Tcl error as it tried to add the newly
born branch to the non-existant branch menu. Moving this code
to after the normal commit cleanup logic resolves the issue, as
we only have a branch menu if we are not in singlecommit mode.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Remove TODO list.
I'm apparently not very good at keeping my own TODO file current.
I its also somewhat strange to keep the TODO list as part of the
software branch, as its meta-information that is not directly
related to the code. I'm pulling the TODO list from git-gui and
moving it into a seperate branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm apparently not very good at keeping my own TODO file current.
I its also somewhat strange to keep the TODO list as part of the
software branch, as its meta-information that is not directly
related to the code. I'm pulling the TODO list from git-gui and
moving it into a seperate branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Include browser in our usage message.
Now that the 'browser' subcommand can be used to startup the tree
browser, it should be listed as a possible subcommand option in
our usage message.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that the 'browser' subcommand can be used to startup the tree
browser, it should be listed as a possible subcommand option in
our usage message.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Change summary of git-gui.
Since git-gui does more than create commits, it is unfair to call
it "a commit creation tool". Instead lets just call it a graphical
user interface.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since git-gui does more than create commits, it is unfair to call
it "a commit creation tool". Instead lets just call it a graphical
user interface.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Display all authors of git-gui.
Now that git-gui has been released to the public as part of Git 1.5.0
I am starting to see some work from other people beyond myself and
Paul. Consequently the copyright for git-gui is not strictly the
two of us anymore, and these others deserve to have some credit
given to them.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that git-gui has been released to the public as part of Git 1.5.0
I am starting to see some work from other people beyond myself and
Paul. Consequently the copyright for git-gui is not strictly the
two of us anymore, and these others deserve to have some credit
given to them.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Use mixed path for docs on Cygwin.
The Firefox browser requires that a URL use / to delimit directories.
This is instead of \, as \ gets escaped by the browser into its hex
escape code and then relative URLs are incorrectly resolved, Firefox
no longer sees the directories for what they are. Since we are
handing the browser a true URL, we better use the standard / for
directories.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The Firefox browser requires that a URL use / to delimit directories.
This is instead of \, as \ gets escaped by the browser into its hex
escape code and then relative URLs are incorrectly resolved, Firefox
no longer sees the directories for what they are. Since we are
handing the browser a true URL, we better use the standard / for
directories.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Check for PRIuMAX rather than NO_C99_FORMAT in fast-import.c.
Thanks to Simon 'corecode' Schubert <corecode@fs.ei.tum.de> for
the clean-up. Defining the C99 standard PRIuMAX when necessary
replaces UM_FMT and the awkward UM10_FMT. There are no direct
C99 translations for other uses of NO_C99_FORMAT in git, alas.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Thanks to Simon 'corecode' Schubert <corecode@fs.ei.tum.de> for
the clean-up. Defining the C99 standard PRIuMAX when necessary
replaces UM_FMT and the awkward UM10_FMT. There are no direct
C99 translations for other uses of NO_C99_FORMAT in git, alas.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Obey NO_C99_FORMAT in fast-import.c.
Define UM_FMT and UM10_FMT and use in place of %ju and %10ju,
respectively. Both format as unsigned long long, so this
assumes the compiler supports long long.
Signed-off-by: Jason Riedy <jason@acm.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Define UM_FMT and UM10_FMT and use in place of %ju and %10ju,
respectively. Both format as unsigned long long, so this
assumes the compiler supports long long.
Signed-off-by: Jason Riedy <jason@acm.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a compat/strtoumax.c for Solaris 8.
Solaris 8 was pre-c99, and they weren't willing to commit to
the strtoumax definition according to /usr/include/inttypes.h.
This adds NO_STRTOUMAX and NO_STRTOULL for ancient systems.
If NO_STRTOUMAX is defined, the routine in compat/strtoumax.c
will be used instead. That routine passes its arguments to
strtoull unless NO_STRTOULL is defined. If NO_STRTOULL, then
the routine uses strtoul (unsigned long).
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Acked-by: Shawn O Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Solaris 8 was pre-c99, and they weren't willing to commit to
the strtoumax definition according to /usr/include/inttypes.h.
This adds NO_STRTOUMAX and NO_STRTOULL for ancient systems.
If NO_STRTOUMAX is defined, the routine in compat/strtoumax.c
will be used instead. That routine passes its arguments to
strtoull unless NO_STRTOULL is defined. If NO_STRTOULL, then
the routine uses strtoul (unsigned long).
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Acked-by: Shawn O Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-clone: Sync documentation to usage note.
Documentation advertises the new `--depth <n>' parameter with an equal
sign, while the usage notes (shown after `git-clone --help') do not. If I
understood git-clone's source code correctly, the version without the
equal sign is correct, which is why this patch syncs documentation to the
usage note.
Signed-off-by: Christian Schlotter <schlotter@users.sourceforge.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation advertises the new `--depth <n>' parameter with an equal
sign, while the usage notes (shown after `git-clone --help') do not. If I
understood git-clone's source code correctly, the version without the
equal sign is correct, which is why this patch syncs documentation to the
usage note.
Signed-off-by: Christian Schlotter <schlotter@users.sourceforge.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
GIT 1.5.0.1
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/i18n.txt: it is i18n.commitencoding not core.commitencoding
Similarly for i18n.logoutputencoding.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Similarly for i18n.logoutputencoding.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Read the config in rev-list
Otherwise "git rev-list --header HEAD" will not do the right
thing if i18n.commitencoding is set.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise "git rev-list --header HEAD" will not do the right
thing if i18n.commitencoding is set.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-gui: Correct crash when saving options in blame mode.
Martin Waitz noticed that git-gui crashed while saving the user's
options out if the application was started in blame mode. This
was caused by the do_save_config procedure invoking reshow_diff
incase the number of context lines was modified by the user.
Because we bypassed main window UI setup to enter blame mode we
did not set many of the globals which were accessed by reshow_diff,
and reading unset variables is an error in Tcl.
Aside from moving the globals to be set earlier, I also modified
reshow_diff to not invoke clear_diff if there is no path currently
in the diff viewer. This way reshow_diff does not crash when in
blame mode due to the $ui_diff command not being defined.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Martin Waitz noticed that git-gui crashed while saving the user's
options out if the application was started in blame mode. This
was caused by the do_save_config procedure invoking reshow_diff
incase the number of context lines was modified by the user.
Because we bypassed main window UI setup to enter blame mode we
did not set many of the globals which were accessed by reshow_diff,
and reading unset variables is an error in Tcl.
Aside from moving the globals to be set earlier, I also modified
reshow_diff to not invoke clear_diff if there is no path currently
in the diff viewer. This way reshow_diff does not crash when in
blame mode due to the $ui_diff command not being defined.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Update draft release notes for 1.5.0.1
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge git://git./pub/scm/gitk/gitk into maint
* git://git.kernel.org/pub/scm/gitk/gitk:
Make gitk save and restore window pane position on Linux and Cygwin.
Make gitk save and restore the user set window position.
[PATCH] gitk: Use show-ref instead of ls-remote
[PATCH] Make gitk work reasonably well on Cygwin.
[PATCH] gitk - remove trailing whitespace from a few lines.
Change git repo-config to git config
* git://git.kernel.org/pub/scm/gitk/gitk:
Make gitk save and restore window pane position on Linux and Cygwin.
Make gitk save and restore the user set window position.
[PATCH] gitk: Use show-ref instead of ls-remote
[PATCH] Make gitk work reasonably well on Cygwin.
[PATCH] gitk - remove trailing whitespace from a few lines.
Change git repo-config to git config
Convert update-index references in docs to add.
Since `git add` is the approved porcelain for an end-user to invoke
when they want to manipulate the index, porcelain documentation
should steer the user to this command rather than the pure plumbing
update-index.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since `git add` is the approved porcelain for an end-user to invoke
when they want to manipulate the index, porcelain documentation
should steer the user to this command rather than the pure plumbing
update-index.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Attempt to improve git-rebase lead-in description.
It was mentioned on #git this morning that the lead-in description
of git-rebase is very confusing. Too many branch this and branch
that in a very short run of text.
This new description attempts to walk the user through the command
syntax, while also describing exactly what git-rebase is doing to
their repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It was mentioned on #git this morning that the lead-in description
of git-rebase is very confusing. Too many branch this and branch
that in a very short run of text.
This new description attempts to walk the user through the command
syntax, while also describing exactly what git-rebase is doing to
their repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Do not take mode bits from index after type change.
When we do not trust executable bit from lstat(2), we copied
existing ce_mode bits without checking if the filesystem object
is a regular file (which is the only thing we apply the "trust
executable bit" business) nor if the blob in the index is a
regular file (otherwise, we should do the same as registering a
new regular file, which is to default non-executable).
Noticed by Johannes Sixt.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we do not trust executable bit from lstat(2), we copied
existing ce_mode bits without checking if the filesystem object
is a regular file (which is the only thing we apply the "trust
executable bit" business) nor if the blob in the index is a
regular file (otherwise, we should do the same as registering a
new regular file, which is to default non-executable).
Noticed by Johannes Sixt.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-blame: prevent argument parsing segfault
The 3rd branch in builtin-blame.c should also check for lacking
arguments. Running that in top dir does not trigger the problem
because the 'prefix' is NULL.
Signed-off-by: Tommi Kyntola <tommi.kyntola@ray.fi>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The 3rd branch in builtin-blame.c should also check for lacking
arguments. Running that in top dir does not trigger the problem
because the 'prefix' is NULL.
Signed-off-by: Tommi Kyntola <tommi.kyntola@ray.fi>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-merge: minor fix for no_trivial_merge_strategies.
The shell loop to determine if we should skip the trivial
in-index merge stage based on what strategy is given was not
prepared to have more than one strategy listed in the variable
$no_trivial_merge_strategies.
This does not trigger unless you use a modified git but the fix
is simple and straightforward, so let's fix it before 1.5.0.1.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The shell loop to determine if we should skip the trivial
in-index merge stage based on what strategy is given was not
prepared to have more than one strategy listed in the variable
$no_trivial_merge_strategies.
This does not trigger unless you use a modified git but the fix
is simple and straightforward, so let's fix it before 1.5.0.1.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-gui: Expose the browser as a subcommand.
Some users may find being able to browse around an arbitrary
branch to be handy, so we now expose our graphical browser
through `git gui browse <committish>`.
Yes, I'm being somewhat lazy and making the user give us
the name of the branch to browse. They can always enter
HEAD.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some users may find being able to browse around an arbitrary
branch to be handy, so we now expose our graphical browser
through `git gui browse <committish>`.
Yes, I'm being somewhat lazy and making the user give us
the name of the branch to browse. They can always enter
HEAD.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
pretend-sha1: grave bugfix.
We stashed away objects that we pretend to have, but did not save the
actual data.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We stashed away objects that we pretend to have, but did not save the
actual data.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-gui: Create new branches from a tag.
I'm missing the possibility to base a new branch on a tag.
The following adds a tag drop down to the new branch dialog.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm missing the possibility to base a new branch on a tag.
The following adds a tag drop down to the new branch dialog.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
GIT-VERSION-FILE: check ./version first.
When somebody else extracts git tarball inside a larger project,
'git describe' would reported the version number of that upper
level project.
Sometimes, using the consistent versioning across subdirectories
of a larger project is useful, but it may not always be the
right thing to do.
This changes the script to check ./vertion file first, and then
fall back to "git describe". This way, by default, tarball
distribution will get our own version. If the upper level wants
to use consistent versioning across its subdirectories, its
Makefile can overwrite ./version file to force whatever version
number they want to give us before descending into us.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When somebody else extracts git tarball inside a larger project,
'git describe' would reported the version number of that upper
level project.
Sometimes, using the consistent versioning across subdirectories
of a larger project is useful, but it may not always be the
right thing to do.
This changes the script to check ./vertion file first, and then
fall back to "git describe". This way, by default, tarball
distribution will get our own version. If the upper level wants
to use consistent versioning across its subdirectories, its
Makefile can overwrite ./version file to force whatever version
number they want to give us before descending into us.
Signed-off-by: Junio C Hamano <junkio@cox.net>
sha1_file.c: Round the mmap offset to half the window size.
This ensures that a given area is mapped at most twice, and greatly
reduces the virtual address space usage.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This ensures that a given area is mapped at most twice, and greatly
reduces the virtual address space usage.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make gitk save and restore window pane position on Linux and Cygwin.
Subtle bugs remained on both Cygwin and Linux that caused the various
window panes to be restored in positions different than where the user
last placed them. Sergey Vlasov posed a pair of suggested fixes to this,
what is done here is slightly different. The basic fix here involves
a) explicitly remembering and restoring the sash positions for the upper
window, and b) using paneconfigure to redundantly set height and width of
other elements. This redundancy is needed as Cygwin Tcl has a nasty habit
of setting pane sizes to zero if their slaves are not configured with a
specific size, but Linux Tcl does not honor the specific size given.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Subtle bugs remained on both Cygwin and Linux that caused the various
window panes to be restored in positions different than where the user
last placed them. Sergey Vlasov posed a pair of suggested fixes to this,
what is done here is slightly different. The basic fix here involves
a) explicitly remembering and restoring the sash positions for the upper
window, and b) using paneconfigure to redundantly set height and width of
other elements. This redundancy is needed as Cygwin Tcl has a nasty habit
of setting pane sizes to zero if their slaves are not configured with a
specific size, but Linux Tcl does not honor the specific size given.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make gitk save and restore the user set window position.
gitk was saving widget sizes and positions when the main window was
destroyed, which is after all child widgets are destroyed. The cure
is to trap the WM_DELETE_WINDOW event before the gui is torn down. Also,
the saved geometry was captured using "winfo geometry .", rather than
"wm geometry ." Under Linux, these two return different answers and the
latter one is correct.
[jc: credit goes to Brett Schwarz for suggesting the use of "wm protocol";
I also squashed the follow-up patch to remove extraneous -0
from expressions.]
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitk was saving widget sizes and positions when the main window was
destroyed, which is after all child widgets are destroyed. The cure
is to trap the WM_DELETE_WINDOW event before the gui is torn down. Also,
the saved geometry was captured using "winfo geometry .", rather than
"wm geometry ." Under Linux, these two return different answers and the
latter one is correct.
[jc: credit goes to Brett Schwarz for suggesting the use of "wm protocol";
I also squashed the follow-up patch to remove extraneous -0
from expressions.]
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[PATCH] gitk: Use show-ref instead of ls-remote
It used to be ls-remote on self was the only easy way to grab
the ref information. Now we have show-ref which does not
involve fork and IPC, so use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
It used to be ls-remote on self was the only easy way to grab
the ref information. Now we have show-ref which does not
involve fork and IPC, so use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
[PATCH] Make gitk work reasonably well on Cygwin.
The gitk gui layout was completely broken on Cygwin. If gitk was started
without previous geometry in ~/.gitk, the user could drag the window sashes
to get a useable layout. However, if ~/.gitk existed, this was not possible
at all.
The fix was to rewrite makewindow, changing the toplevel containers and
the particular geometry information saved between sessions. Numerous bugs
in both the Cygwin and the Linux Tk versions make this a delicate
balancing act: the version here works in both but many subtle variants
are competely broken in one or the other environment.
Three user visible changes result:
1 - The viewer is fully functional under Cygwin.
2 - The search bar moves from the bottom to the top of the lower left
pane. This was necessary to get around a layout problem on Cygwin.
3 - The window size and position is saved and restored between sessions.
Again, this is necessary to get around a layout problem on Cygwin.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The gitk gui layout was completely broken on Cygwin. If gitk was started
without previous geometry in ~/.gitk, the user could drag the window sashes
to get a useable layout. However, if ~/.gitk existed, this was not possible
at all.
The fix was to rewrite makewindow, changing the toplevel containers and
the particular geometry information saved between sessions. Numerous bugs
in both the Cygwin and the Linux Tk versions make this a delicate
balancing act: the version here works in both but many subtle variants
are competely broken in one or the other environment.
Three user visible changes result:
1 - The viewer is fully functional under Cygwin.
2 - The search bar moves from the bottom to the top of the lower left
pane. This was necessary to get around a layout problem on Cygwin.
3 - The window size and position is saved and restored between sessions.
Again, this is necessary to get around a layout problem on Cygwin.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
[PATCH] gitk - remove trailing whitespace from a few lines.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Change git repo-config to git config
This is the gitk part of e0d10e1c63bc52b37bbec99b07deee794058d9b4
from Tom Prince.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This is the gitk part of e0d10e1c63bc52b37bbec99b07deee794058d9b4
from Tom Prince.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Make sure packedgitwindowsize is multiple of (pagesize * 2)
The next patch depends on this.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The next patch depends on this.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add RelNotes 1.5.0.1
In the same spirit as commit 6fc66686, let's keep notes as we fix
things.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the same spirit as commit 6fc66686, let's keep notes as we fix
things.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Still updating 1.5.0 release notes.
In cruft removal section we had a cruft we needed to remove.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In cruft removal section we had a cruft we needed to remove.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-daemon: Avoid leaking the listening sockets into child processes.
This makes it possible to restart git-daemon even if some children are
still running.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes it possible to restart git-daemon even if some children are
still running.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Clarify two backward incompatible repository options.
It was unclear if the backward compatible features were disabled
or the configuration variables that controls them were set to
false by default from the description. Obviously we meant the
former, but the problem was made worse by the fact that one
configuration variable breaks compatibility when set to true and
the other one breaks it when set to false.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It was unclear if the backward compatible features were disabled
or the configuration variables that controls them were set to
false by default from the description. Obviously we meant the
former, but the problem was made worse by the fact that one
configuration variable breaks compatibility when set to true and
the other one breaks it when set to false.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-gui: Prefer version file over git-describe.
Some distributions are using Git for part of their package
management system, but unpack Git's own source code for
delivery from the .tar.gz. This means that when we walk
up the directory tree with git-describe to locate a Git
repository, the repository we find is for the distribution
and *not* for git-gui. Consequently any tag we might find
there is bogus and does not apply to us.
In this case the version file should always exist and be
readable, as the packager is working from the released
.tar.gz sources. So we should always favor the version
file over anything git-describe guess for us.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some distributions are using Git for part of their package
management system, but unpack Git's own source code for
delivery from the .tar.gz. This means that when we walk
up the directory tree with git-describe to locate a Git
repository, the repository we find is for the distribution
and *not* for git-gui. Consequently any tag we might find
there is bogus and does not apply to us.
In this case the version file should always exist and be
readable, as the packager is working from the released
.tar.gz sources. So we should always favor the version
file over anything git-describe guess for us.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Makefile: update check-docs target
Old aliases are not linked to the main command list. Also the internal
git-add--interactive does not need to be on the list.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Old aliases are not linked to the main command list. Also the internal
git-add--interactive does not need to be on the list.
Signed-off-by: Junio C Hamano <junkio@cox.net>
cmd-list: add git-remote
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation: Drop full-stop from git-fast-import title.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-gui: Print version on the console.
Like `git version`, `git gui version` (or `git gui --version`) shows
the version of git-gui, in case the user needs to know this, without
looking at it in the GUI about dialog.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Like `git version`, `git gui version` (or `git gui --version`) shows
the version of git-gui, in case the user needs to know this, without
looking at it in the GUI about dialog.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: More consistently display the application name.
I started to find it confusing that git-gui would refer to itself
as git-citool when it was started through the citool hardlink, or
with the citool subcommand. What was especially confusing was the
options dialog and the about dialog, as both seemed to imply they
were somehow different from the git-gui versions. In actuality
there is no difference at all.
Now we just call our options menu item 'Options...' (skipping the
application name) and our About dialog now always shows git-gui
within the short description (above the copyleft notice) and in
the version field.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I started to find it confusing that git-gui would refer to itself
as git-citool when it was started through the citool hardlink, or
with the citool subcommand. What was especially confusing was the
options dialog and the about dialog, as both seemed to imply they
were somehow different from the git-gui versions. In actuality
there is no difference at all.
Now we just call our options menu item 'Options...' (skipping the
application name) and our About dialog now always shows git-gui
within the short description (above the copyleft notice) and in
the version field.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Minor corrections to release notes
Update section about warning when leaving a detached head.
Also fix a few indentations that weren't like the rest of the file.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update section about warning when leaving a detached head.
Also fix a few indentations that weren't like the rest of the file.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-gui: Permit merging tags into the current branch.
It was pointed out on the git mailing list by Martin Koegler that
we did not show tags as possible things to merge into the current
branch. They actually are, and core Git's Grand Unified Merge
Driver will accept them just like any other commit.
So our merge dialog now requests all refs/heads, refs/remotes and
refs/tags named refs and attempts to match them against the commits
not in HEAD. One complicating factor here is that we must use the
%(*objectname) field when talking about an annotated tag, as they
will not appear in the output of rev-list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It was pointed out on the git mailing list by Martin Koegler that
we did not show tags as possible things to merge into the current
branch. They actually are, and core Git's Grand Unified Merge
Driver will accept them just like any other commit.
So our merge dialog now requests all refs/heads, refs/remotes and
refs/tags named refs and attempts to match them against the commits
not in HEAD. One complicating factor here is that we must use the
%(*objectname) field when talking about an annotated tag, as they
will not appear in the output of rev-list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Basic version check to ensure git 1.5.0 or later is used.
This is a very crude (but hopefully effective) check against the
`git` executable found in our PATH. Some of the subcommands and
options that git-gui requires to be present to operate were created
during the 1.5.0 development cycle, so 1.5 is the minimum version
of git that we can expect to support.
There actually are early releases of 1.5 (e.g. 1.5.0-rc0) that
don't have everything we expect (like `blame --incremental`) but
these are purely academic at this point. 1.5.0 final was tagged
and released just a few hours ago. The release candidates will
(hopefully) fade into the dark quickly.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is a very crude (but hopefully effective) check against the
`git` executable found in our PATH. Some of the subcommands and
options that git-gui requires to be present to operate were created
during the 1.5.0 development cycle, so 1.5 is the minimum version
of git that we can expect to support.
There actually are early releases of 1.5 (e.g. 1.5.0-rc0) that
don't have everything we expect (like `blame --incremental`) but
these are purely academic at this point. 1.5.0 final was tagged
and released just a few hours ago. The release candidates will
(hopefully) fade into the dark quickly.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Refactor 'exec git subcmd' idiom.
As we frequently need to execute a Git subcommand and obtain
its returned output we are making heavy use of [exec git foo]
to run foo. As I'm concerned about possibly needing to carry
environment data through a shell on Cygwin for at least some
subcommands, I'm migrating all current calls to a new git
proc. This actually makes the code look cleaner too, as
we aren't saying 'exec git' everywhere.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
As we frequently need to execute a Git subcommand and obtain
its returned output we are making heavy use of [exec git foo]
to run foo. As I'm concerned about possibly needing to carry
environment data through a shell on Cygwin for at least some
subcommands, I'm migrating all current calls to a new git
proc. This actually makes the code look cleaner too, as
we aren't saying 'exec git' everywhere.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
GIT 1.5.0
Add release notes to the distribution.
This also adds a hook in the Makefile I can use to automatically
include pointers to documentation for older releases when updating
the pages at http://kernel.org/pub/software/scm/git/docs/.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This also adds a hook in the Makefile I can use to automatically
include pointers to documentation for older releases when updating
the pages at http://kernel.org/pub/software/scm/git/docs/.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'master' of git://repo.or.cz/git-gui
* 'master' of git://repo.or.cz/git-gui:
git-gui: fix typo in GIT-VERSION-GEN, "/dev/null" not "/devnull"
* 'master' of git://repo.or.cz/git-gui:
git-gui: fix typo in GIT-VERSION-GEN, "/dev/null" not "/devnull"
Documentation: Moving out of detached HEAD does not warn anymore.
The documentation still talked about the unnecessary 'safety'
in git-checkout.
Pointed out by Matthias Lederhofer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The documentation still talked about the unnecessary 'safety'
in git-checkout.
Pointed out by Matthias Lederhofer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mark places that need blob munging later for CRLF conversion.
Here's a patch that I think we can merge right now. There may be
other places that need this, but this at least points out the
three places that read/write working tree files for git
update-index, checkout and diff respectively. That should cover
a lot of it [jc: git-apply uses an entirely different codepath
both for reading and writing].
Some day we can actually implement it. In the meantime, this
points out a place for people to start. We *can* even start with
a really simple "we do CRLF conversion automatically, regardless
of filename" kind of approach, that just look at the data (all
three cases have the _full_ file data already in memory) and
says "ok, this is text, so let's convert to/from DOS format
directly".
THAT somebody can write in ten minutes, and it would already
make git much nicer on a DOS/Windows platform, I suspect.
And it would be totally zero-cost if you just make it a config
option (but please make it dynamic with the _default_ just being
0/1 depending on whether it's UNIX/Windows, just so that UNIX
people can _test_ it easily).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Here's a patch that I think we can merge right now. There may be
other places that need this, but this at least points out the
three places that read/write working tree files for git
update-index, checkout and diff respectively. That should cover
a lot of it [jc: git-apply uses an entirely different codepath
both for reading and writing].
Some day we can actually implement it. In the meantime, this
points out a place for people to start. We *can* even start with
a really simple "we do CRLF conversion automatically, regardless
of filename" kind of approach, that just look at the data (all
three cases have the _full_ file data already in memory) and
says "ok, this is text, so let's convert to/from DOS format
directly".
THAT somebody can write in ten minutes, and it would already
make git much nicer on a DOS/Windows platform, I suspect.
And it would be totally zero-cost if you just make it a config
option (but please make it dynamic with the _default_ just being
0/1 depending on whether it's UNIX/Windows, just so that UNIX
people can _test_ it easily).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update RPM core package description
Git isn't as stupid as it used to be
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Git isn't as stupid as it used to be
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix potential command line overflow in hooks--update
In a repository with a large number of refs, the following command line
could easily overflow the command line size limitations
git-rev-list $newref $(git-rev-parse --not --all)
Fortunately, git-rev-list already has the means to cope with this
situation with the --stdin switch
git-rev-parse --not --all | git-rev-list --stdin $newref
Which is exactly what this patch does.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In a repository with a large number of refs, the following command line
could easily overflow the command line size limitations
git-rev-list $newref $(git-rev-parse --not --all)
Fortunately, git-rev-list already has the means to cope with this
situation with the --stdin switch
git-rev-parse --not --all | git-rev-list --stdin $newref
Which is exactly what this patch does.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-gc: run pack-refs by default unless the repo is bare
The config variable gc.packrefs is tristate now: "true", "false"
and "notbare", where "notbare" is the default.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The config variable gc.packrefs is tristate now: "true", "false"
and "notbare", where "notbare" is the default.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-gui: fix typo in GIT-VERSION-GEN, "/dev/null" not "/devnull"
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
"git-fetch --tags $URL" should not overwrite existing tags
Use the same --exclude-existing filter as we use for automatic
tag following to avoid overwriting existing tags with replacement
ones the other side created.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use the same --exclude-existing filter as we use for automatic
tag following to avoid overwriting existing tags with replacement
ones the other side created.
Signed-off-by: Junio C Hamano <junkio@cox.net>
for-each-reflog: not having $GIT_DIR/logs directory is not an error.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Do not forget to pack objects reachable from HEAD reflog.
Similar to commit eb8381c8, we need to use for_each_reflog() to make
sure we do not miss objects reachable from HEAD reflog.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Similar to commit eb8381c8, we need to use for_each_reflog() to make
sure we do not miss objects reachable from HEAD reflog.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Work around Subversion race in git-svn tests.
Some of the git-svn tests can fail on fast machines due to a race in
Subversion: if a file is modified in the same second it was checked out
(or in for that matter), Subversion will not consider it modified. This
works around the problem by increasing the timestamp by one second
before each commit.
[jc: with "touch -r -d" replacement from Eric]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some of the git-svn tests can fail on fast machines due to a race in
Subversion: if a file is modified in the same second it was checked out
(or in for that matter), Subversion will not consider it modified. This
works around the problem by increasing the timestamp by one second
before each commit.
[jc: with "touch -r -d" replacement from Eric]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Clarify that git-update-server-info should be run for every git-push
The old text suggested that git-update-server-info only needs to be run
if new tags or branches are created, but not for new commits.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The old text suggested that git-update-server-info only needs to be run
if new tags or branches are created, but not for new commits.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
blameview: Move the commit info to a pane below the blame window.
Also spawn the the new blameview in the background
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also spawn the the new blameview in the background
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git merge documentation: -m is optional
Changed -m=<msg> to -m <msg> too.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Changed -m=<msg> to -m <msg> too.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make gitk save and restore window pane position on Linux and Cygwin.
Subtle bugs remained on both Cygwin and Linux that caused the various
window panes to be restored in positions different than where the user
last placed them. Sergey Vlasov posed a pair of suggested fixes to this,
what is done here is slightly different. The basic fix here involves
a) explicitly remembering and restoring the sash positions for the upper
window, and b) using paneconfigure to redundantly set height and width of
other elements. This redundancy is needed as Cygwin Tcl has a nasty habit
of setting pane sizes to zero if their slaves are not configured with a
specific size, but Linux Tcl does not honor the specific size given.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Subtle bugs remained on both Cygwin and Linux that caused the various
window panes to be restored in positions different than where the user
last placed them. Sergey Vlasov posed a pair of suggested fixes to this,
what is done here is slightly different. The basic fix here involves
a) explicitly remembering and restoring the sash positions for the upper
window, and b) using paneconfigure to redundantly set height and width of
other elements. This redundancy is needed as Cygwin Tcl has a nasty habit
of setting pane sizes to zero if their slaves are not configured with a
specific size, but Linux Tcl does not honor the specific size given.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add RPM target for git-gui
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Link git-gui into the master Makefile.
I'm exporting gitexecdir because git-gui wants to know where
it should install git-gui and git-citool. These belong under
gitexecdir, just like git-diff, as the git wrapper is able to
invoke these commands for the end-user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I'm exporting gitexecdir because git-gui wants to know where
it should install git-gui and git-citool. These belong under
gitexecdir, just like git-diff, as the git wrapper is able to
invoke these commands for the end-user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merge branch 'master' of git://repo.or.cz/git-gui
* 'master' of git://repo.or.cz/git-gui:
git-gui: Change base version to 0.6.
git-gui: Guess our version accurately as a subproject.
git-gui: Handle gitgui tags in version gen.
git-gui: Generate a version file on demand.
git-gui: Rename GIT_VERSION to GITGUI_VERSION.
git-gui: Allow gitexecdir, INSTALL to be set by the caller.
* 'master' of git://repo.or.cz/git-gui:
git-gui: Change base version to 0.6.
git-gui: Guess our version accurately as a subproject.
git-gui: Handle gitgui tags in version gen.
git-gui: Generate a version file on demand.
git-gui: Rename GIT_VERSION to GITGUI_VERSION.
git-gui: Allow gitexecdir, INSTALL to be set by the caller.
git-gui: Change base version to 0.6.
This is the start of the 0.6 series of git-gui. I'm calling it 0.6
(rather than any other value) as I already had a private tag on
one system based on 0.5, and that tag is quite a bit behind this
version.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is the start of the 0.6 series of git-gui. I'm calling it 0.6
(rather than any other value) as I already had a private tag on
one system based on 0.5, and that tag is quite a bit behind this
version.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Guess our version accurately as a subproject.
When we are included as a subproject, such as how git.git carries
us, we want to retain our own version number and not the version
number assigned by git.git's own tags. Consequently we need to
locate the correct tag which applies to our tree content and
its commit lineage.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When we are included as a subproject, such as how git.git carries
us, we want to retain our own version number and not the version
number assigned by git.git's own tags. Consequently we need to
locate the correct tag which applies to our tree content and
its commit lineage.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Handle gitgui tags in version gen.
I've decided to use gitgui-0.5 as the format for tags in the
git-gui repository. The prefix of gitgui was chosen here to
make its namespace different from the namespace used by git
itself, allowing developers to pull both tag namespaces into
the same repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I've decided to use gitgui-0.5 as the format for tags in the
git-gui repository. The prefix of gitgui was chosen here to
make its namespace different from the namespace used by git
itself, allowing developers to pull both tag namespaces into
the same repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Generate a version file on demand.
Because git-gui is being shipped as a subproject of the main
Git project and will often have a different lifecycle than
the main Git project, we should ship our own version number
in the release tarball rather than relying on the main Git
version file.
Git's master Makefile will invoke our own with the target
dist-version, asking us to save off our GITGUI_VERSION value
into our own version file, so that our GIT-VERSION-GEN script
can recover it at build time.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because git-gui is being shipped as a subproject of the main
Git project and will often have a different lifecycle than
the main Git project, we should ship our own version number
in the release tarball rather than relying on the main Git
version file.
Git's master Makefile will invoke our own with the target
dist-version, asking us to save off our GITGUI_VERSION value
into our own version file, so that our GIT-VERSION-GEN script
can recover it at build time.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Rename GIT_VERSION to GITGUI_VERSION.
Now that the decision has been made to treat git-gui as a
subproject, rather than merging it directly into git, we
should use a different substitution for our version value
to avoid any possible confusion.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that the decision has been made to treat git-gui as a
subproject, rather than merging it directly into git, we
should use a different substitution for our version value
to avoid any possible confusion.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Allow gitexecdir, INSTALL to be set by the caller.
When used as a subproject within git.git our Makefile must honor
the gitexecdir which git.git's Makefile is passing down to us,
ensuring that we install our executables into the libexec chosen
by the end-user or packager.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When used as a subproject within git.git our Makefile must honor
the gitexecdir which git.git's Makefile is passing down to us,
ensuring that we install our executables into the libexec chosen
by the end-user or packager.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
import-tars: brown paper bag fix for file mode.
There is a bug with this $git_mode variable which should be 0644
or 0755, but nothing else I think.
Signed-off-by: Michael Loeffler <zvpunry@zvpunry.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There is a bug with this $git_mode variable which should be 0644
or 0755, but nothing else I think.
Signed-off-by: Michael Loeffler <zvpunry@zvpunry.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
fast-import: Support reusing 'from' and brown paper bag fix reset.
It was suggested on the mailing list that being able to use `from`
in any commit to reset the current branch is useful in some types of
importers, such as a darcs importer.
We originally did not permit resetting an existing branch with a
new `from` command during a `commit` command, but this restriction
was only to help debug the hacked up cvs2svn that Jon Smirl was
developing in parallel with git-fast-import. It is probably more
of a problem to disallow it than to allow it. So now we permit a
`from` during any `commit`.
While making the changes required to permit multiple `from`
commands on the same branch, I discovered we no longer needed the
last_commit field to be set to 0 during a reset, so that was removed.
(Reset was originally setting the field to 0 to signal cmd_from()
that it was OK to execute on the branch.)
While poking around in this section of fast-import I also realized
the `reset` command was not working as intended if the corresponding
`from` command was omitted (as allowed by the BNF grammar and the
code). If `from` was omitted we cleared out the tree but we left
the tree SHA-1 and parent commit SHA-1 intact. This is not what
the user intended in this case. Instead they would be trying to
reset the branch to have no parent and to have no tree, making the
branch look new-born during the next commit. We now clear these
SHA-1 values during `reset`, ensuring the branch looks new-born if
`from` does not get supplied.
New test cases for these were also added.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It was suggested on the mailing list that being able to use `from`
in any commit to reset the current branch is useful in some types of
importers, such as a darcs importer.
We originally did not permit resetting an existing branch with a
new `from` command during a `commit` command, but this restriction
was only to help debug the hacked up cvs2svn that Jon Smirl was
developing in parallel with git-fast-import. It is probably more
of a problem to disallow it than to allow it. So now we permit a
`from` during any `commit`.
While making the changes required to permit multiple `from`
commands on the same branch, I discovered we no longer needed the
last_commit field to be set to 0 during a reset, so that was removed.
(Reset was originally setting the field to 0 to signal cmd_from()
that it was OK to execute on the branch.)
While poking around in this section of fast-import I also realized
the `reset` command was not working as intended if the corresponding
`from` command was omitted (as allowed by the BNF grammar and the
code). If `from` was omitted we cleared out the tree but we left
the tree SHA-1 and parent commit SHA-1 intact. This is not what
the user intended in this case. Instead they would be trying to
reset the branch to have no parent and to have no tree, making the
branch look new-born during the next commit. We now clear these
SHA-1 values during `reset`, ensuring the branch looks new-born if
`from` does not get supplied.
New test cases for these were also added.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>