Code

git.git
13 years agoGit 1.7.5.1 v1.7.5.1
Junio C Hamano [Wed, 4 May 2011 22:47:40 +0000 (15:47 -0700)]
Git 1.7.5.1

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'jh/dirstat' into maint
Junio C Hamano [Wed, 4 May 2011 21:59:07 +0000 (14:59 -0700)]
Merge branch 'jh/dirstat' into maint

* jh/dirstat:
  --dirstat: In case of renames, use target filename instead of source filename
  Teach --dirstat not to completely ignore rearranged lines within a file
  --dirstat-by-file: Make it faster and more correct
  --dirstat: Describe non-obvious differences relative to --stat or regular diff

13 years agoMerge branch 'sp/maint-clear-postfields' into maint
Junio C Hamano [Wed, 4 May 2011 21:58:56 +0000 (14:58 -0700)]
Merge branch 'sp/maint-clear-postfields' into maint

* sp/maint-clear-postfields:
  http: clear POSTFIELDS when initializing a slot

13 years agoMerge branch 'jk/maint-stash-oob' into maint
Junio C Hamano [Wed, 4 May 2011 21:58:42 +0000 (14:58 -0700)]
Merge branch 'jk/maint-stash-oob' into maint

* jk/maint-stash-oob:
  stash: fix false positive in the invalid ref test.
  stash: fix accidental apply of non-existent stashes

Conflicts:
t/t3903-stash.sh

13 years agoMerge branch 'jk/maint-upload-pack-shallow' into maint
Junio C Hamano [Wed, 4 May 2011 21:58:13 +0000 (14:58 -0700)]
Merge branch 'jk/maint-upload-pack-shallow' into maint

* jk/maint-upload-pack-shallow:
  upload-pack: start pack-objects before async rev-list

13 years agoMerge branch 'dm/stash-k-i-p' into maint
Junio C Hamano [Wed, 4 May 2011 21:57:49 +0000 (14:57 -0700)]
Merge branch 'dm/stash-k-i-p' into maint

* dm/stash-k-i-p:
  stash: ensure --no-keep-index and --patch can be used in any order
  stash: add two more tests for --no-keep-index

13 years agoMerge branch 'jc/pack-objects-bigfile' into maint
Junio C Hamano [Wed, 4 May 2011 21:57:38 +0000 (14:57 -0700)]
Merge branch 'jc/pack-objects-bigfile' into maint

* jc/pack-objects-bigfile:
  Teach core.bigfilethreashold to pack-objects

13 years agoMerge branch 'mg/reflog-with-options' into maint
Junio C Hamano [Wed, 4 May 2011 21:57:33 +0000 (14:57 -0700)]
Merge branch 'mg/reflog-with-options' into maint

* mg/reflog-with-options:
  reflog: fix overriding of command line options
  t/t1411: test reflog with formats
  builtin/log.c: separate default and setup of cmd_log_init()

13 years agoMerge branch 'jk/stash-loosen-safety' into maint
Junio C Hamano [Wed, 4 May 2011 21:57:15 +0000 (14:57 -0700)]
Merge branch 'jk/stash-loosen-safety' into maint

* jk/stash-loosen-safety:
  stash: drop dirty worktree check on apply

13 years agoMerge branch 'ar/clean-rmdir-empty' into maint
Junio C Hamano [Wed, 4 May 2011 21:57:06 +0000 (14:57 -0700)]
Merge branch 'ar/clean-rmdir-empty' into maint

* ar/clean-rmdir-empty:
  clean: unreadable directory may still be rmdir-able if it is empty

13 years agoMerge branch 'mg/sha1-path-advise' into maint
Junio C Hamano [Wed, 4 May 2011 21:56:51 +0000 (14:56 -0700)]
Merge branch 'mg/sha1-path-advise' into maint

* mg/sha1-path-advise:
  sha1_name: Suggest commit:./file for path in subdir
  t1506: factor out test for "Did you mean..."

13 years agogit-add.txt: document 'add.ignoreErrors'
Valentin Haenel [Wed, 4 May 2011 19:58:17 +0000 (21:58 +0200)]
git-add.txt: document 'add.ignoreErrors'

Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Noticed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoStart 1.7.5.1 maintenance track
Junio C Hamano [Fri, 29 Apr 2011 18:47:10 +0000 (11:47 -0700)]
Start 1.7.5.1 maintenance track

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'mg/x-years-12-months' into maint
Junio C Hamano [Fri, 29 Apr 2011 18:43:18 +0000 (11:43 -0700)]
Merge branch 'mg/x-years-12-months' into maint

* mg/x-years-12-months:
  date: avoid "X years, 12 months" in relative dates

13 years agogit-send-email: fix missing space in error message
Sylvain Rabot [Fri, 29 Apr 2011 18:23:24 +0000 (20:23 +0200)]
git-send-email: fix missing space in error message

When the command cannot make a connection to the SMTP server the error
message to diagnose the broken configuration is issued.  However, when an
optional smtp-server-port is given and needs to be reported, the message
lacked a space between "hello=<smtp-domain>" and "port=<smtp-server-port>".

Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agohttp: clear POSTFIELDS when initializing a slot
Junio C Hamano [Tue, 26 Apr 2011 15:04:49 +0000 (08:04 -0700)]
http: clear POSTFIELDS when initializing a slot

After posting a short request using CURLOPT_POSTFIELDS, if the slot
is reused for posting a large payload, the slot ends up having both
POSTFIELDS (which now points at a random garbage) and READFUNCTION,
in which case the curl library tries to use the stale POSTFIELDS.

Clear it as part of the general slot initialization in get_active_slot().

Heavylifting-by: Shawn Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn Pearce <spearce@spearce.org>
13 years agoGit 1.7.5 v1.7.5
Junio C Hamano [Sun, 24 Apr 2011 06:36:32 +0000 (23:36 -0700)]
Git 1.7.5

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agodate: avoid "X years, 12 months" in relative dates
Michael J Gruber [Wed, 20 Apr 2011 09:12:11 +0000 (11:12 +0200)]
date: avoid "X years, 12 months" in relative dates

When relative dates are more than about a year ago, we start
writing them as "Y years, M months".  At the point where we
calculate Y and M, we have the time delta specified as a
number of days. We calculate these integers as:

  Y = days / 365
  M = (days % 365 + 15) / 30

This rounds days in the latter half of a month up to the
nearest month, so that day 16 is "1 month" (or day 381 is "1
year, 1 month").

We don't round the year at all, though, meaning we can end
up with "1 year, 12 months", which is silly; it should just
be "2 years".

Implement this differently with months of size

  onemonth = 365/12

so that

  totalmonths = (long)( (days + onemonth/2)/onemonth )
  years = totalmonths / 12
  months = totalmonths % 12

In order to do this without floats, we write the first formula as

  totalmonths = (days*12*2 + 365) / (365*2)

Tests and inspiration by Jeff King.

Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoGit 1.7.5-rc3 v1.7.5-rc3
Junio C Hamano [Tue, 19 Apr 2011 18:51:00 +0000 (11:51 -0700)]
Git 1.7.5-rc3

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoSync with 1.7.4.5
Junio C Hamano [Tue, 19 Apr 2011 18:49:13 +0000 (11:49 -0700)]
Sync with 1.7.4.5

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoGit 1.7.4.5 v1.7.4.5
Junio C Hamano [Tue, 19 Apr 2011 18:45:38 +0000 (11:45 -0700)]
Git 1.7.4.5

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agogit-svn.txt: Document --mergeinfo
Michael J Gruber [Tue, 19 Apr 2011 12:24:27 +0000 (14:24 +0200)]
git-svn.txt: Document --mergeinfo

6abd933 (git-svn: allow the mergeinfo property to be set, 2010-09-24)
introduced the --mergeinfo option. Document it.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoRevert "run-command: prettify -D_FORTIFY_SOURCE workaround"
Junio C Hamano [Mon, 18 Apr 2011 21:14:53 +0000 (14:14 -0700)]
Revert "run-command: prettify -D_FORTIFY_SOURCE workaround"

This reverts commit ebec842773932e6f853acac70c80f84209b5f83e, which
somehow mistakenly thought that any non-zero return from write(2) is
an error.

13 years agoMerge branch 'maint'
Junio C Hamano [Thu, 14 Apr 2011 19:26:45 +0000 (12:26 -0700)]
Merge branch 'maint'

* maint:
  archive: document limitation of tar.umask config setting
  t3306,t5304: avoid clock skew issues
  git.txt: fix list continuation

13 years agoarchive: document limitation of tar.umask config setting
René Scharfe [Thu, 14 Apr 2011 18:04:57 +0000 (20:04 +0200)]
archive: document limitation of tar.umask config setting

The local value of the config variable tar.umask is not passed to the
other side with --remote.  We may want to change that, but for now just
document this fact.

Reported-by: Jacek Masiulaniec <jacek.masiulaniec@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agot3306,t5304: avoid clock skew issues
Michael J Gruber [Thu, 14 Apr 2011 17:38:13 +0000 (19:38 +0200)]
t3306,t5304: avoid clock skew issues

On systems where the local time and file modification time may be out of
sync (e.g. test directory on NFS) t3306 and t5305 can fail because prune
compares times such as "now" (client time) with file modification times
(server times for remote file systems). I.e., these are spurious test
failures.

Avoid this by setting the relevant modification times to the local time.

Noticed on a system with as little as 2s time skew.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agogit.txt: fix list continuation
Michael J Gruber [Thu, 14 Apr 2011 07:17:26 +0000 (09:17 +0200)]
git.txt: fix list continuation

Remove a spurious empty line which prevented asciidoc from recognizing a
list continuation mark ('+'), so that it does not get output literally any
more.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoGit 1.7.5-rc2 v1.7.5-rc2
Junio C Hamano [Wed, 13 Apr 2011 21:01:03 +0000 (14:01 -0700)]
Git 1.7.5-rc2

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'maint'
Junio C Hamano [Wed, 13 Apr 2011 20:59:19 +0000 (13:59 -0700)]
Merge branch 'maint'

* maint:

13 years agoMerge branch 'jc/rev-list-options-fix' into maint
Junio C Hamano [Wed, 13 Apr 2011 20:56:52 +0000 (13:56 -0700)]
Merge branch 'jc/rev-list-options-fix' into maint

* jc/rev-list-options-fix:
  "log --cherry-pick" documentation regression fix

13 years agoMerge branch 'js/checkout-untracked-symlink' into maint
Junio C Hamano [Wed, 13 Apr 2011 20:55:53 +0000 (13:55 -0700)]
Merge branch 'js/checkout-untracked-symlink' into maint

* js/checkout-untracked-symlink:
  t2021: mark a test as fixed

13 years agoremove doubled words, e.g., s/to to/to/, and fix related typos
Jim Meyering [Wed, 13 Apr 2011 15:39:40 +0000 (17:39 +0200)]
remove doubled words, e.g., s/to to/to/, and fix related typos

I found that some doubled words had snuck back into projects from which
I'd already removed them, so now there's a "syntax-check" makefile rule in
gnulib to help prevent recurrence.

Running the command below spotted a few in git, too:

  git ls-files | xargs perl -0777 -n \
    -e 'while (/\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt])\s+\1\b/gims)' \
    -e '{$n=($` =~ tr/\n/\n/ + 1); ($v=$&)=~s/\n/\\n/g;' \
    -e 'print "$ARGV:$n:$v\n"}'

Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agorevert: Hide '-r' option in default usage
Ramkumar Ramachandra [Sun, 10 Apr 2011 15:39:14 +0000 (21:09 +0530)]
revert: Hide '-r' option in default usage

The '-r' command-line option is a no-op provided only for backward
compatiblity since abd6970 (cherry-pick: make -r the default, 2006-10-05),
and somehow ended up surviving across reimplementation in C at 9509af6
(Make git-revert & git-cherry-pick a builtin, 2007-03-01) and another
rewrite of the command line parser at f810379 (Make builtin-revert.c use
parse_options, 2007-10-07).  We should have stopped advertising the option
long time ago.

Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years ago--dirstat: In case of renames, use target filename instead of source filename
Johan Herland [Tue, 12 Apr 2011 09:24:34 +0000 (11:24 +0200)]
--dirstat: In case of renames, use target filename instead of source filename

This changes --dirstat analysis to count "damage" toward the target filename,
rather than the source filename. For renames within a directory, this won't
matter to the final output, but when moving files between diretories, the
output now lists the target directory rather than the source directory.

Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'js/checkout-untracked-symlink'
Junio C Hamano [Tue, 12 Apr 2011 07:05:50 +0000 (00:05 -0700)]
Merge branch 'js/checkout-untracked-symlink'

* js/checkout-untracked-symlink:
  t2021: mark a test as fixed

13 years agoMerge branch 'nd/init-gitdir'
Junio C Hamano [Tue, 12 Apr 2011 07:04:53 +0000 (00:04 -0700)]
Merge branch 'nd/init-gitdir'

* nd/init-gitdir:
  t0001: guard a new test with SYMLINKS prerequisite

13 years agot2021: mark a test as fixed
Johannes Sixt [Tue, 12 Apr 2011 06:41:19 +0000 (08:41 +0200)]
t2021: mark a test as fixed

The failure was fixed by the previous commit.

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agot0001: guard a new test with SYMLINKS prerequisite
Johannes Sixt [Tue, 12 Apr 2011 06:30:49 +0000 (08:30 +0200)]
t0001: guard a new test with SYMLINKS prerequisite

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoTeach --dirstat not to completely ignore rearranged lines within a file
Johan Herland [Sun, 10 Apr 2011 22:48:52 +0000 (00:48 +0200)]
Teach --dirstat not to completely ignore rearranged lines within a file

Currently, the --dirstat analysis ignores when lines within a file are
rearranged, because the "damage" calculated by show_dirstat() is 0.
However, if the object name has changed, we already know that there is
some damage, and it is unintuitive to claim there is _no_ damage.

Teach show_dirstat() to assign a minimum amount of damage (== 1) to
entries for which the analysis otherwise yields zero damage, to still
represent that these files are changed, instead of saying that there
is no change.

Also, skip --dirstat analysis when the object names are the same (e.g. for
a pure file rename).

Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMakefile: extract Q_() source strings as ngettext()
Ævar Arnfjörð Bjarmason [Sun, 10 Apr 2011 19:37:01 +0000 (19:37 +0000)]
Makefile: extract Q_() source strings as ngettext()

The Q_() wrapper added by 0c9ea33 (i18n: add stub Q_() wrapper for
ngettext, 2011-03-09) needs to be noticed by xgettext.

Add an appropriate --keyword option to the Makefile, so that "make pot"
would notice the strings in the plural form marked with the wrapper.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoi18n: avoid parenthesized string as array initializer
Ramsay Jones [Thu, 7 Apr 2011 18:41:48 +0000 (19:41 +0100)]
i18n: avoid parenthesized string as array initializer

The syntax

    static const char ignore_error[] = ("something");

is invalid C.  A parenthesized string is not allowed as an array
initializer.

Some compilers, for example GCC and MSVC, allow this syntax as an
extension, but it is not a portable construct.  tcc does not parse it, for
example.

Remove the parenthesis from the definition of the N_() macro to
fix this.

Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years ago--dirstat-by-file: Make it faster and more correct
Johan Herland [Sun, 10 Apr 2011 22:48:51 +0000 (00:48 +0200)]
--dirstat-by-file: Make it faster and more correct

Currently, when using --dirstat-by-file, it first does the full --dirstat
analysis (using diffcore_count_changes()), and then resets 'damage' to 1,
if any damage was found by diffcore_count_changes().

But --dirstat-by-file is not interested in the file damage per se. It only
cares if the file changed at all. In that sense it only cares if the blob
object for a file has changed. We therefore only need to compare the
object names of each file pair in the diff queue and we can skip the
entire --dirstat analysis and simply set 'damage' to 1 for each entry
where the object name has changed.

This makes --dirstat-by-file faster, and also bypasses --dirstat's practice
of ignoring rearranged lines within a file.

The patch also contains an added testcase verifying that --dirstat-by-file
now detects changes that only rearrange lines within a file.

Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years ago--dirstat: Describe non-obvious differences relative to --stat or regular diff
Johan Herland [Sun, 10 Apr 2011 22:48:50 +0000 (00:48 +0200)]
--dirstat: Describe non-obvious differences relative to --stat or regular diff

Also add a testcase documenting the current behavior.

Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge git://git.bogomips.org/git-svn
Junio C Hamano [Mon, 11 Apr 2011 16:34:19 +0000 (09:34 -0700)]
Merge git://git.bogomips.org/git-svn

* git://git.bogomips.org/git-svn:
  git-svn: Cache results of running the executable "git config"
  git-svn: Add a svn-remote.<name>.pushurl config key

13 years agoMerge git://git.kernel.org/pub/scm/gitk/gitk
Junio C Hamano [Mon, 11 Apr 2011 16:33:06 +0000 (09:33 -0700)]
Merge git://git.kernel.org/pub/scm/gitk/gitk

* git://git.kernel.org/pub/scm/gitk/gitk:
  gitk: Update cherry-pick error message parsing
  gitk: Quote tag names in event bindings to avoid problems with % chars
  gitk: Allow user to control how much of the SHA1 ID gets auto-selected
  gitk: spelling fixes in Russian translation
  gitk: Take only numeric version components when computing $git_version

13 years agogit-svn: Cache results of running the executable "git config"
James Y Knight [Mon, 4 Apr 2011 19:09:08 +0000 (15:09 -0400)]
git-svn: Cache results of running the executable "git config"

Running programs is not cheap!

Signed-off-by: James Y Knight <jknight@itasoftware.com>
Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
13 years agogit-svn: Add a svn-remote.<name>.pushurl config key
Alejandro R. Sedeño [Fri, 8 Apr 2011 14:57:54 +0000 (10:57 -0400)]
git-svn: Add a svn-remote.<name>.pushurl config key

Similar to the 'remote.<name>.pushurl' config key for git remotes,
'pushurl' is designed to be used in cases where 'url' points to an SVN
repository via a read-only transport, to provide an alternate
read/write transport. It is assumed that both keys point to the same
repository.

The 'pushurl' key is distinct from the 'commiturl' key in that
'commiturl' is a full svn path while 'pushurl' (like 'url') is a base
path. 'commiturl' takes precendece over 'pushurl' in cases where
either might be used.

The 'pushurl' is used by git-svn's dcommit and branch commands.

Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu>
Reviewed-by: James Y Knight <jknight@itasoftware.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
13 years agogitk: Update cherry-pick error message parsing
Anders Kaseorg [Wed, 19 Jan 2011 19:45:00 +0000 (14:45 -0500)]
gitk: Update cherry-pick error message parsing

Commit 981ff5c37ae20687c98d98c8689d5e89016026d2 changed the error
message from git cherry-pick from
    Automatic cherry-pick failed.  [...advice...]
to
    error: could not apply 7ab78c9... Do something neat.
    [...advice...]

Update gitk’s regex to match this, restoring the ability to launch git
citool to resolve conflicted cherry-picks.

Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Paul Mackerras <paulus@samba.org>
13 years agostash: ensure --no-keep-index and --patch can be used in any order
Dan McGee [Thu, 7 Apr 2011 17:04:20 +0000 (12:04 -0500)]
stash: ensure --no-keep-index and --patch can be used in any order

Don't assume one comes after the other on the command line. Use a
three-state variable to track and check its value accordingly.

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agostash: add two more tests for --no-keep-index
Dan McGee [Thu, 7 Apr 2011 17:04:19 +0000 (12:04 -0500)]
stash: add two more tests for --no-keep-index

One of these passes just fine; the other one exposes a problem where
command line flag order matters for --no-keep-index and --patch
interaction.

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agogit-p4: replace each tab with 8 spaces for consistency
Andrew Garber [Thu, 7 Apr 2011 06:01:21 +0000 (02:01 -0400)]
git-p4: replace each tab with 8 spaces for consistency

Note that the majority of git-p4 uses spaces, not tabs, for indentation.
Consistent indentation is a good hygiene for Python scripts, and mixing
tabs and spaces in Python can lead to hard-to-find bugs.

Signed-off-by: Andrew Garber <andrew@andrewgarber.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoupload-pack: start pack-objects before async rev-list
Jeff King [Wed, 6 Apr 2011 21:33:33 +0000 (17:33 -0400)]
upload-pack: start pack-objects before async rev-list

In a pthread-enabled version of upload-pack, there's a race condition
that can cause a deadlock on the fflush(NULL) we call from run-command.

What happens is this:

  1. Upload-pack is informed we are doing a shallow clone.

  2. We call start_async() to spawn a thread that will generate rev-list
     results to feed to pack-objects. It gets a file descriptor to a
     pipe which will eventually hook to pack-objects.

  3. The rev-list thread uses fdopen to create a new output stream
     around the fd we gave it, called pack_pipe.

  4. The thread writes results to pack_pipe. Outside of our control,
     libc is doing locking on the stream. We keep writing until the OS
     pipe buffer is full, and then we block in write(), still holding
     the lock.

  5. The main thread now uses start_command to spawn pack-objects.
     Before forking, it calls fflush(NULL) to flush every stdio output
     buffer. It blocks trying to get the lock on pack_pipe.

And we have a deadlock. The thread will block until somebody starts
reading from the pipe. But nobody will read from the pipe until we
finish flushing to the pipe.

To fix this, we swap the start order: we start the
pack-objects reader first, and then the rev-list writer
after. Thus the problematic fflush(NULL) happens before we
even open the new file descriptor (and even if it didn't,
flushing should no longer block, as the reader at the end of
the pipe is now active).

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoGit 1.7.5-rc1 v1.7.5-rc1
Junio C Hamano [Wed, 6 Apr 2011 17:57:32 +0000 (10:57 -0700)]
Git 1.7.5-rc1

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoSync with 1.7.4.4
Junio C Hamano [Wed, 6 Apr 2011 17:51:30 +0000 (10:51 -0700)]
Sync with 1.7.4.4

13 years agoGit 1.7.4.4 v1.7.4.4
Junio C Hamano [Wed, 6 Apr 2011 17:49:35 +0000 (10:49 -0700)]
Git 1.7.4.4

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'nm/maint-conflicted-submodule-entries' into maint
Junio C Hamano [Wed, 6 Apr 2011 17:41:17 +0000 (10:41 -0700)]
Merge branch 'nm/maint-conflicted-submodule-entries' into maint

* nm/maint-conflicted-submodule-entries:
  submodule: process conflicting submodules only once

13 years agoMerge branch 'mg/rev-list-n-reverse-doc' into maint
Junio C Hamano [Wed, 6 Apr 2011 17:40:49 +0000 (10:40 -0700)]
Merge branch 'mg/rev-list-n-reverse-doc' into maint

* mg/rev-list-n-reverse-doc:
  git-log.txt,rev-list-options.txt: put option blocks in proper order
  git-log.txt,rev-list-options.txt: -n/--max-count is commit limiting

13 years agoMerge branch 'jk/maint-remote-mirror-safer'
Junio C Hamano [Wed, 6 Apr 2011 17:38:14 +0000 (10:38 -0700)]
Merge branch 'jk/maint-remote-mirror-safer'

* jk/maint-remote-mirror-safer:
  remote: deprecate --mirror
  remote: separate the concept of push and fetch mirrors
  remote: disallow some nonsensical option combinations

13 years agoMerge branch 'mg/doc-revisions-txt'
Junio C Hamano [Wed, 6 Apr 2011 17:37:56 +0000 (10:37 -0700)]
Merge branch 'mg/doc-revisions-txt'

* mg/doc-revisions-txt:
  revisions.txt: language improvements
  revisions.txt: structure with a labelled list
  revisions.txt: consistent use of quotes

13 years agostash: drop dirty worktree check on apply
Jeff King [Tue, 5 Apr 2011 21:23:15 +0000 (17:23 -0400)]
stash: drop dirty worktree check on apply

Before we apply a stash, we make sure there are no changes
in the worktree that are not in the index. This check dates
back to the original git-stash.sh, and is presumably
intended to prevent changes in the working tree from being
accidentally lost during the merge.

However, this check has two problems:

  1. It is overly restrictive. If my stash changes only file
     "foo", but "bar" is dirty in the working tree, it will
     prevent us from applying the stash.

  2. It is redundant. We don't touch the working tree at all
     until we actually call merge-recursive. But it has its
     own (much more accurate) checks to avoid losing working
     tree data, and will abort the merge with a nicer
     message telling us which paths were problems.

So we can simply drop the check entirely.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoTeach core.bigfilethreashold to pack-objects
Junio C Hamano [Tue, 5 Apr 2011 17:44:11 +0000 (10:44 -0700)]
Teach core.bigfilethreashold to pack-objects

The pack-objects command should take notice of the object file and
refrain from attempting to delta large ones, to be consistent with
the fast-import command.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agostash: fix false positive in the invalid ref test.
Jon Seymour [Tue, 5 Apr 2011 23:21:13 +0000 (09:21 +1000)]
stash: fix false positive in the invalid ref test.

Jeff King reported a problem with git stash apply incorrectly
applying an invalid stash reference.

There is an existing test that should have caught this, but
the test itself was broken, resulting in a false positive.

Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agostash: fix accidental apply of non-existent stashes
Jeff King [Tue, 5 Apr 2011 21:20:25 +0000 (17:20 -0400)]
stash: fix accidental apply of non-existent stashes

Once upon a time, "git rev-parse ref@{9999999}" did not
generate an error. Therefore when we got an invalid stash
reference in "stash apply", we could end up not noticing
until quite late.  Commit b0f0ecd (detached-stash: work
around git rev-parse failure to detect bad log refs,
2010-08-21) handled this by checking for the "Log for stash
has only %d entries" warning on stderr when we validated the
ref.

A few days later, e6eedc3 (rev-parse: exit with non-zero
status if ref@{n} is not valid., 2010-08-24) fixed the
original issue. That made the extra stderr test superfluous,
but also introduced a new bug. Now the early call to:

  git rev-parse --symbolic "$@"

fails, but we don't notice the exit code. Worse, its empty
output means we think the user didn't provide us a ref, and
we try to apply stash@{0}.

This patch checks the rev-parse exit code and fails early in
the revision parsing process. We can also get rid of the
stderr test; as a bonus, this means that "stash apply" can
now run under GIT_TRACE=1 properly.

Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agorevisions.txt: language improvements
Michael J Gruber [Mon, 4 Apr 2011 15:27:05 +0000 (17:27 +0200)]
revisions.txt: language improvements

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'maint'
Junio C Hamano [Mon, 4 Apr 2011 22:02:08 +0000 (15:02 -0700)]
Merge branch 'maint'

* maint:
  Documentation: trivial grammar fix in core.worktree description
  gitweb: Fix parsing of negative fractional timezones in JavaScript

13 years agoMerge branch 'jl/submodule-fetch-on-demand'
Junio C Hamano [Mon, 4 Apr 2011 22:02:01 +0000 (15:02 -0700)]
Merge branch 'jl/submodule-fetch-on-demand'

* jl/submodule-fetch-on-demand:
  fetch/pull: Describe --recurse-submodule restrictions in the BUGS section
  submodule update: Don't fetch when the submodule commit is already present
  fetch/pull: Don't recurse into a submodule when commits are already present
  Submodules: Add 'on-demand' value for the 'fetchRecurseSubmodule' option
  config: teach the fetch.recurseSubmodules option the 'on-demand' value
  fetch/pull: Add the 'on-demand' value to the --recurse-submodules option
  fetch/pull: recurse into submodules when necessary

Conflicts:
builtin/fetch.c
submodule.c

13 years agoMerge branch 'jc/rev-list-options-fix'
Junio C Hamano [Mon, 4 Apr 2011 17:55:38 +0000 (10:55 -0700)]
Merge branch 'jc/rev-list-options-fix'

* jc/rev-list-options-fix:
  "log --cherry-pick" documentation regression fix

13 years agoDocumentation: trivial grammar fix in core.worktree description
SZEDER Gábor [Mon, 4 Apr 2011 14:59:25 +0000 (16:59 +0200)]
Documentation: trivial grammar fix in core.worktree description

Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agogitweb: Fix parsing of negative fractional timezones in JavaScript
Jakub Narebski [Fri, 1 Apr 2011 19:06:28 +0000 (21:06 +0200)]
gitweb: Fix parsing of negative fractional timezones in JavaScript

Extract converting numerical timezone in the form of '(+|-)HHMM' to
timezoneOffset function, and fix parsing of negative fractional
timezones.

This is used to format timestamps in 'blame_incremental' view; this
complements commit 2b1e172 (gitweb: Fix handling of fractional
timezones in parse_date, 2011-03-25).

Now

  gitweb.cgi/git.git/blame_incremental/3fe5489:/contrib/gitview/gitview#l853

and

  gitweb.cgi/git.git/blame/3fe5489:/contrib/gitview/gitview#l853

show the same correct time in author's local timezone in title
(on mouseover) [Aneesh Kumar K.V, 2006-02-24 00:59:42 +0530].

Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'nm/maint-conflicted-submodule-entries'
Junio C Hamano [Mon, 4 Apr 2011 10:41:24 +0000 (03:41 -0700)]
Merge branch 'nm/maint-conflicted-submodule-entries'

* nm/maint-conflicted-submodule-entries:
  submodule: process conflicting submodules only once

13 years agoMerge branch 'maint'
Junio C Hamano [Sun, 3 Apr 2011 20:53:11 +0000 (13:53 -0700)]
Merge branch 'maint'

* maint:
  Start preparing for 1.7.4.4
  pull: do not clobber untracked files on initial pull
  compat: add missing #include <sys/resource.h>

Conflicts:
RelNotes

13 years agoStart preparing for 1.7.4.4
Junio C Hamano [Sun, 3 Apr 2011 19:58:23 +0000 (12:58 -0700)]
Start preparing for 1.7.4.4

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agopull: do not clobber untracked files on initial pull
Jeff King [Fri, 25 Mar 2011 18:13:31 +0000 (14:13 -0400)]
pull: do not clobber untracked files on initial pull

For a pull into an unborn branch, we do not use "git merge"
at all. Instead, we call read-tree directly. However, we
used the --reset parameter instead of "-m", which turns off
the safety features.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'jc/index-update-if-able' into maint
Junio C Hamano [Sun, 3 Apr 2011 19:33:05 +0000 (12:33 -0700)]
Merge branch 'jc/index-update-if-able' into maint

* jc/index-update-if-able:
  update $GIT_INDEX_FILE when there are racily clean entries
  diff/status: refactor opportunistic index update

13 years agoMerge branch 'lt/default-abbrev' into maint
Junio C Hamano [Sun, 3 Apr 2011 19:32:51 +0000 (12:32 -0700)]
Merge branch 'lt/default-abbrev' into maint

* lt/default-abbrev:
  Rename core.abbrevlength back to core.abbrev
  Make the default abbrev length configurable

13 years agoMerge branch 'jc/maint-rev-list-culled-boundary' into maint
Junio C Hamano [Sun, 3 Apr 2011 19:32:35 +0000 (12:32 -0700)]
Merge branch 'jc/maint-rev-list-culled-boundary' into maint

* jc/maint-rev-list-culled-boundary:
  list-objects.c: don't add an unparsed NULL as a pending tree

Conflicts:
list-objects.c

13 years agoMerge branch 'mm/maint-log-n-with-diff-filtering' into maint
Junio C Hamano [Sun, 3 Apr 2011 19:31:59 +0000 (12:31 -0700)]
Merge branch 'mm/maint-log-n-with-diff-filtering' into maint

* mm/maint-log-n-with-diff-filtering:
  log: fix --max-count when used together with -S or -G

13 years agoMerge branch 'jk/format-patch-multiline-header' into maint
Junio C Hamano [Sun, 3 Apr 2011 19:31:19 +0000 (12:31 -0700)]
Merge branch 'jk/format-patch-multiline-header' into maint

* jk/format-patch-multiline-header:
  format-patch: rfc2047-encode newlines in headers
  format-patch: wrap long header lines
  strbuf: add fixed-length version of add_wrapped_text

13 years agoMerge branch 'jn/maint-instaweb-plack-fix' into maint
Junio C Hamano [Sun, 3 Apr 2011 19:30:58 +0000 (12:30 -0700)]
Merge branch 'jn/maint-instaweb-plack-fix' into maint

* jn/maint-instaweb-plack-fix:
  git-instaweb: Change how gitweb.psgi is made runnable as standalone app

13 years agoMerge branch 'lp/config-vername-check' into maint
Junio C Hamano [Sun, 3 Apr 2011 19:29:45 +0000 (12:29 -0700)]
Merge branch 'lp/config-vername-check' into maint

* lp/config-vername-check:
  Disallow empty section and variable names
  Sanity-check config variable names

13 years agosha1_name: Suggest commit:./file for path in subdir
Michael J Gruber [Thu, 31 Mar 2011 09:17:34 +0000 (11:17 +0200)]
sha1_name: Suggest commit:./file for path in subdir

Currently, the "Did you mean..." message suggests "commit:fullpath"
only. Extend this to show the more convenient "commit:./file" form also.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agot1506: factor out test for "Did you mean..."
Michael J Gruber [Thu, 31 Mar 2011 09:17:33 +0000 (11:17 +0200)]
t1506: factor out test for "Did you mean..."

With the current code, it's a "'"'"'" jungle, and we test only 1 line of
the 2 line response. Factor out and test both.

Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agocompat: add missing #include <sys/resource.h>
Jonathan Nieder [Fri, 18 Mar 2011 20:23:52 +0000 (15:23 -0500)]
compat: add missing #include <sys/resource.h>

Starting with commit c793430 (Limit file descriptors used by packs,
2011-02-28), git uses getrlimit to tell how many file descriptors it
can use.  Unfortunately it does not include the header declaring that
function, resulting in compilation errors:

 sha1_file.c: In function 'open_packed_git_1':
 sha1_file.c:718: error: storage size of 'lim' isn't known
 sha1_file.c:721: warning: implicit declaration of function 'getrlimit'
 sha1_file.c:721: error: 'RLIMIT_NOFILE' undeclared (first use in this function)
 sha1_file.c:718: warning: unused variable 'lim'

The standard header to include for this is <sys/resource.h> (which on
some systems itself requires declarations from <sys/types.h> or
<sys/time.h>).  Probably the problem was missed until now because in
current glibc sys/resource.h happens to be included by sys/wait.h.

MinGW does not provide sys/resource.h (and compat/mingw takes care of
providing getrlimit some other way), so add the missing #include to
the "#ifndef __MINGW32__" block in git-compat-util.h.

Reported-by: Stefan Sperling <stsp@stsp.name>
Tested-by: Stefan Sperling <stsp@stsp.name> [on OpenBSD]
Tested-by: Arnaud Lacombe <lacombar@gmail.com> [on FreeBSD 8]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agogit.el: Don't use font-lock-compile-keywords
Lawrence Mitchell [Fri, 4 Feb 2011 10:59:18 +0000 (10:59 +0000)]
git.el: Don't use font-lock-compile-keywords

If font-lock is disabled, font-lock-compile-keywords complains.
Really what we want to do is to replace log-edit's font-lock
definitions with our own, so define a major mode deriving from
log-edit and set up font-lock-defaults there.  We then use the
optional MODE argument to log-edit to set up the major mode of the
commit buffer appropriately.

Signed-off-by: Lawrence Mitchell <wence@gmx.li>
Acked-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agot2019-checkout-ambiguous-ref.sh: depend on C_LOCALE_OUTPUT
Ævar Arnfjörð Bjarmason [Sun, 3 Apr 2011 13:33:39 +0000 (13:33 +0000)]
t2019-checkout-ambiguous-ref.sh: depend on C_LOCALE_OUTPUT

The t2019-checkout-ambiguous-ref.sh tests added in v1.7.4.3~12^2
examines the output for a translatable string, and must be marked
with C_LOCALE_OUTPUT; otherwise, GETTEXT_POISON=YesPlease tests
will break.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoFix two unused variable warnings in gcc 4.6
Dan McGee [Mon, 28 Mar 2011 01:32:19 +0000 (20:32 -0500)]
Fix two unused variable warnings in gcc 4.6

Seen with -Wunused-but-set-variable.

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoRemove old binaries from .gitignore
Dan McGee [Thu, 31 Mar 2011 02:26:01 +0000 (21:26 -0500)]
Remove old binaries from .gitignore

These two programs were dumped a while ago.

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agosparse: Fix errors and silence warnings
Stephen Boyd [Sun, 3 Apr 2011 07:06:54 +0000 (00:06 -0700)]
sparse: Fix errors and silence warnings

 * load_file() returns a void pointer but is using 0 for the return
   value

 * builtin/receive-pack.c forgot to include builtin.h

 * packet_trace_prefix can be marked static

 * ll_merge takes a pointer for its last argument, not an int

 * crc32 expects a pointer as the second argument but Z_NULL is defined
   to be 0 (see 38f4d13 sparse fix: Using plain integer as NULL pointer,
   2006-11-18 for more info)

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoUpdate release notes
Junio C Hamano [Sun, 3 Apr 2011 07:18:50 +0000 (00:18 -0700)]
Update release notes

As 1.7.4.3 has backmerged a handful of fixes from the master,
drop these entries from 1.7.5 release notes.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoSync with 1.7.4.3
Junio C Hamano [Sun, 3 Apr 2011 07:14:16 +0000 (00:14 -0700)]
Sync with 1.7.4.3

13 years agoGit 1.7.4.3 v1.7.4.3
Junio C Hamano [Sun, 3 Apr 2011 07:12:31 +0000 (00:12 -0700)]
Git 1.7.4.3

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoDoc: mention --delta-base-offset is the default for Porcelain commands
Junio C Hamano [Sun, 3 Apr 2011 06:08:13 +0000 (23:08 -0700)]
Doc: mention --delta-base-offset is the default for Porcelain commands

The underlying pack-objects plumbing command still needs an explicit
option from the command line, but these days Porcelain passes the
option, so there is no need for end users to worry about it anymore.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
13 years agoMerge branch 'nd/init-gitdir'
Junio C Hamano [Sat, 2 Apr 2011 00:57:37 +0000 (17:57 -0700)]
Merge branch 'nd/init-gitdir'

* nd/init-gitdir:
  init, clone: support --separate-git-dir for .git file
  git-init.txt: move description section up

Conflicts:
builtin/clone.c

13 years agoMerge branch 'jc/merge-sans-branch'
Junio C Hamano [Sat, 2 Apr 2011 00:57:16 +0000 (17:57 -0700)]
Merge branch 'jc/merge-sans-branch'

* jc/merge-sans-branch:
  merge: merge with the default upstream branch without argument
  merge: match the help text with the documentation

Conflicts:
builtin/merge.c

13 years agoMerge branch 'jr/grep-en-config'
Junio C Hamano [Sat, 2 Apr 2011 00:56:27 +0000 (17:56 -0700)]
Merge branch 'jr/grep-en-config'

* jr/grep-en-config:
  grep: allow -E and -n to be turned on by default via configuration

13 years agoMerge branch 'ab/i18n-st'
Junio C Hamano [Sat, 2 Apr 2011 00:55:55 +0000 (17:55 -0700)]
Merge branch 'ab/i18n-st'

* ab/i18n-st: (69 commits)
  i18n: git-shortlog basic messages
  i18n: git-revert split up "could not revert/apply" message
  i18n: git-revert literal "me" messages
  i18n: git-revert "Your local changes" message
  i18n: git-revert basic messages
  i18n: git-notes GIT_NOTES_REWRITE_MODE error message
  i18n: git-notes basic commands
  i18n: git-gc "Auto packing the repository" message
  i18n: git-gc basic messages
  i18n: git-describe basic messages
  i18n: git-clean clean.requireForce messages
  i18n: git-clean basic messages
  i18n: git-bundle basic messages
  i18n: git-archive basic messages
  i18n: git-status "renamed: " message
  i18n: git-status "Initial commit" message
  i18n: git-status "Changes to be committed" message
  i18n: git-status shortstatus messages
  i18n: git-status "nothing to commit" messages
  i18n: git-status basic messages
  ...

Conflicts:
builtin/branch.c
builtin/checkout.c
builtin/clone.c
builtin/commit.c
builtin/grep.c
builtin/merge.c
builtin/push.c
builtin/revert.c
t/t3507-cherry-pick-conflict.sh
t/t7607-merge-overwrite.sh

13 years agoMerge branch 'jk/pull-into-empty'
Junio C Hamano [Sat, 2 Apr 2011 00:50:54 +0000 (17:50 -0700)]
Merge branch 'jk/pull-into-empty'

* jk/pull-into-empty:
  pull: do not clobber untracked files on initial pull
  merge: merge unborn index before setting ref

13 years agoMerge branch 'sb/sparse-more'
Junio C Hamano [Sat, 2 Apr 2011 00:50:20 +0000 (17:50 -0700)]
Merge branch 'sb/sparse-more'

* sb/sparse-more:
  Makefile: Cover more files with make check

13 years agoMerge branch 'maint'
Junio C Hamano [Sat, 2 Apr 2011 00:45:59 +0000 (17:45 -0700)]
Merge branch 'maint'

* maint:
  docs: fix filter-branch subdir example for exotic repo names

13 years agoMerge branch 'nd/index-doc' into maint
Junio C Hamano [Fri, 1 Apr 2011 23:23:55 +0000 (16:23 -0700)]
Merge branch 'nd/index-doc' into maint

* nd/index-doc:
  doc: technical details about the index file format
  doc: technical details about the index file format