From: Johannes Schindelin Date: Wed, 16 Jul 2008 01:33:44 +0000 (+0200) Subject: Rename ".dotest/" to ".git/rebase" and ".dotest-merge" to "rebase-merge" X-Git-Tag: v1.6.0-rc0~56 X-Git-Url: https://git.tokkee.org/?a=commitdiff_plain;h=28ed6e7b321bee3dd7e4aa9c0ff7da64844136f6;p=git.git Rename ".dotest/" to ".git/rebase" and ".dotest-merge" to "rebase-merge" Since the files generated and used during a rebase are never to be tracked, they should live in $GIT_DIR. While at it, avoid the rather meaningless term "dotest" to "rebase", and unhide ".dotest-merge". This was wished for on the mailing list, but so far unimplemented. Signed-off-by: Johannes Schindelin Signed-off-by: Junio C Hamano --- diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index b1164753e..fdfa53644 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -301,7 +301,7 @@ If it does not apply correctly, there can be various reasons. patch appropriately. * Your MUA corrupted your patch; "am" would complain that - the patch does not apply. Look at .dotest/ subdirectory and + the patch does not apply. Look at .git/rebase/ subdirectory and see what 'patch' file contains and check for the common corruption patterns mentioned above. diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index 1395c7d98..2d7f16259 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -140,9 +140,9 @@ aborts in the middle,. You can recover from this in one of two ways: the index file to bring it in a state that the patch should have produced. Then run the command with '--resolved' option. -The command refuses to process new mailboxes while `.dotest` +The command refuses to process new mailboxes while `.git/rebase` directory exists, so if you decide to start over from scratch, -run `rm -f -r .dotest` before running the command with mailbox +run `rm -f -r .git/rebase` before running the command with mailbox names. Before any patches are applied, ORIG_HEAD is set to the tip of the diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index e30f6a698..51afc87e1 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -39,7 +39,7 @@ It is possible that a merge failure will prevent this process from being completely automatic. You will have to resolve any such merge failure and run `git rebase --continue`. Another option is to bypass the commit that caused the merge failure with `git rebase --skip`. To restore the -original and remove the .dotest working files, use the command +original and remove the .git/rebase working files, use the command `git rebase --abort` instead. Assume the following history exists and the current branch is "topic": diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index 92d400753..8761ee7e7 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -2431,7 +2431,7 @@ $ git rebase origin ------------------------------------------------- This will remove each of your commits from mywork, temporarily saving -them as patches (in a directory named ".dotest"), update mywork to +them as patches (in a directory named ".git/rebase"), update mywork to point at the latest version of origin, then apply each of the saved patches to the new mywork. The result will look like: diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index 03e4e0278..29f6cd4e9 100755 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -73,26 +73,26 @@ __git_ps1 () if [ -n "$g" ]; then local r local b - if [ -d "$g/../.dotest" ] + if [ -d "$g/rebase" ] then - if test -f "$g/../.dotest/rebasing" + if test -f "$g/rebase/rebasing" then r="|REBASE" - elif test -f "$g/../.dotest/applying" + elif test -f "$g/rebase/applying" then r="|AM" else r="|AM/REBASE" fi b="$(git symbolic-ref HEAD 2>/dev/null)" - elif [ -f "$g/.dotest-merge/interactive" ] + elif [ -f "$g/rebase-merge/interactive" ] then r="|REBASE-i" - b="$(cat "$g/.dotest-merge/head-name")" - elif [ -d "$g/.dotest-merge" ] + b="$(cat "$g/rebase-merge/head-name")" + elif [ -d "$g/rebase-merge" ] then r="|REBASE-m" - b="$(cat "$g/.dotest-merge/head-name")" + b="$(cat "$g/rebase-merge/head-name")" elif [ -f "$g/MERGE_HEAD" ] then r="|MERGING" @@ -487,8 +487,8 @@ __git_whitespacelist="nowarn warn error error-all strip" _git_am () { - local cur="${COMP_WORDS[COMP_CWORD]}" - if [ -d .dotest ]; then + local cur="${COMP_WORDS[COMP_CWORD]}" dir="$(__gitdir)" + if [ -d "$dir"/rebase ]; then __gitcomp "--skip --resolved" return fi @@ -915,7 +915,7 @@ _git_push () _git_rebase () { local cur="${COMP_WORDS[COMP_CWORD]}" dir="$(__gitdir)" - if [ -d .dotest ] || [ -d "$dir"/.dotest-merge ]; then + if [ -d "$dir"/rebase ] || [ -d "$dir"/rebase-merge ]; then __gitcomp "--continue --skip --abort" return fi diff --git a/contrib/emacs/git.el b/contrib/emacs/git.el index 4fa853fae..43b059bba 100644 --- a/contrib/emacs/git.el +++ b/contrib/emacs/git.el @@ -1252,8 +1252,8 @@ Return the list of files that haven't been handled." "\n") (when subject (insert subject "\n\n")) (cond (msg (insert msg "\n")) - ((file-readable-p ".dotest/msg") - (insert-file-contents ".dotest/msg")) + ((file-readable-p ".git/rebase/msg") + (insert-file-contents ".git/rebase/msg")) ((file-readable-p ".git/MERGE_MSG") (insert-file-contents ".git/MERGE_MSG"))) ; delete empty lines at end @@ -1272,9 +1272,9 @@ Return the list of files that haven't been handled." (coding-system (git-get-commits-coding-system)) author-name author-email subject date) (when (eq 0 (buffer-size buffer)) - (when (file-readable-p ".dotest/info") + (when (file-readable-p ".git/rebase/info") (with-temp-buffer - (insert-file-contents ".dotest/info") + (insert-file-contents ".git/rebase/info") (goto-char (point-min)) (when (re-search-forward "^Author: \\(.*\\)\nEmail: \\(.*\\)$" nil t) (setq author-name (match-string 1)) diff --git a/git-am.sh b/git-am.sh index 52b5669b4..cc8787b46 100755 --- a/git-am.sh +++ b/git-am.sh @@ -119,7 +119,7 @@ It does not apply to blobs recorded in its index." } prec=4 -dotest=".dotest" +dotest="$GIT_DIR/rebase" sign= utf8=t keep= skip= interactive= resolved= binary= rebasing= resolvemsg= resume= git_apply_opt= @@ -195,7 +195,7 @@ then false ;; esac || - die "previous dotest directory $dotest still exists but mbox given." + die "previous rebase directory $dotest still exists but mbox given." resume=yes else # Make sure we are not given --skip nor --resolved @@ -325,7 +325,7 @@ do <"$dotest"/info >/dev/null && go_next && continue - test -s $dotest/patch || { + test -s "$dotest/patch" || { echo "Patch is empty. Was it split wrong?" stop_here $this } diff --git a/git-quiltimport.sh b/git-quiltimport.sh index 7cd8f7134..d1efa1d74 100755 --- a/git-quiltimport.sh +++ b/git-quiltimport.sh @@ -53,7 +53,7 @@ if ! [ -d "$QUILT_PATCHES" ] ; then fi # Temporary directories -tmp_dir=.dotest +tmp_dir="$GIT_DIR"/rebase tmp_msg="$tmp_dir/msg" tmp_patch="$tmp_dir/patch" tmp_info="$tmp_dir/info" diff --git a/git-rebase--interactive.sh b/git-rebase--interactive.sh index a35212d9d..da79a2456 100755 --- a/git-rebase--interactive.sh +++ b/git-rebase--interactive.sh @@ -31,7 +31,7 @@ skip skip current patch and continue rebasing process . git-sh-setup require_work_tree -DOTEST="$GIT_DIR/.dotest-merge" +DOTEST="$GIT_DIR/rebase-merge" TODO="$DOTEST"/git-rebase-todo DONE="$DOTEST"/done MSG="$DOTEST"/message diff --git a/git-rebase.sh b/git-rebase.sh index 2597d777d..56cf6f031 100755 --- a/git-rebase.sh +++ b/git-rebase.sh @@ -14,7 +14,7 @@ It is possible that a merge failure will prevent this process from being completely automatic. You will have to resolve any such merge failure and run git rebase --continue. Another option is to bypass the commit that caused the merge failure with git rebase --skip. To restore the -original and remove the .dotest working files, use the command +original and remove the .git/rebase working files, use the command git rebase --abort instead. Note that if is not specified on the command line, the @@ -42,7 +42,7 @@ To restore the original branch and stop rebasing run \"git rebase --abort\". unset newbase strategy=recursive do_merge= -dotest=$GIT_DIR/.dotest-merge +dotest="$GIT_DIR"/rebase-merge prec=4 verbose= git_am_opt= @@ -150,7 +150,7 @@ while test $# != 0 do case "$1" in --continue) - test -d "$dotest" -o -d .dotest || + test -d "$dotest" -o -d "$GIT_DIR"/rebase || die "No rebase in progress?" git diff-files --quiet --ignore-submodules || { @@ -173,15 +173,15 @@ do finish_rb_merge exit fi - head_name=$(cat .dotest/head-name) && - onto=$(cat .dotest/onto) && - orig_head=$(cat .dotest/orig-head) && + head_name=$(cat "$GIT_DIR"/rebase/head-name) && + onto=$(cat "$GIT_DIR"/rebase/onto) && + orig_head=$(cat "$GIT_DIR"/rebase/orig-head) && git am --resolved --3way --resolvemsg="$RESOLVEMSG" && move_to_original_branch exit ;; --skip) - test -d "$dotest" -o -d .dotest || + test -d "$dotest" -o -d "$GIT_DIR"/rebase || die "No rebase in progress?" git reset --hard HEAD || exit $? @@ -201,15 +201,15 @@ do finish_rb_merge exit fi - head_name=$(cat .dotest/head-name) && - onto=$(cat .dotest/onto) && - orig_head=$(cat .dotest/orig-head) && + head_name=$(cat "$GIT_DIR"/rebase/head-name) && + onto=$(cat "$GIT_DIR"/rebase/onto) && + orig_head=$(cat "$GIT_DIR"/rebase/orig-head) && git am -3 --skip --resolvemsg="$RESOLVEMSG" && move_to_original_branch exit ;; --abort) - test -d "$dotest" -o -d .dotest || + test -d "$dotest" -o -d "$GIT_DIR"/rebase || die "No rebase in progress?" git rerere clear @@ -217,7 +217,7 @@ do then move_to_original_branch else - dotest=.dotest + dotest="$GIT_DIR"/rebase move_to_original_branch fi git reset --hard $(cat "$dotest/orig-head") @@ -265,24 +265,24 @@ do shift done -# Make sure we do not have .dotest +# Make sure we do not have $GIT_DIR/rebase if test -z "$do_merge" then - if mkdir .dotest + if mkdir "$GIT_DIR"/rebase then - rmdir .dotest + rmdir "$GIT_DIR"/rebase else echo >&2 ' -It seems that I cannot create a .dotest directory, and I wonder if you +It seems that I cannot create a '"$GIT_DIR"'/rebase directory, and I wonder if you are in the middle of patch application or another rebase. If that is not -the case, please rm -fr .dotest and run me again. I am stopping in case +the case, please rm -fr '"$GIT_DIR"'/rebase and run me again. I am stopping in case you still have something valuable there.' exit 1 fi else if test -d "$dotest" then - die "previous dotest directory $dotest still exists." \ + die "previous rebase directory $dotest still exists." \ 'try git-rebase < --continue | --abort >' fi fi @@ -396,10 +396,10 @@ then git am $git_am_opt --rebasing --resolvemsg="$RESOLVEMSG" && move_to_original_branch ret=$? - test 0 != $ret -a -d .dotest && - echo $head_name > .dotest/head-name && - echo $onto > .dotest/onto && - echo $orig_head > .dotest/orig-head + test 0 != $ret -a -d "$GIT_DIR"/rebase && + echo $head_name > "$GIT_DIR"/rebase/head-name && + echo $onto > "$GIT_DIR"/rebase/onto && + echo $orig_head > "$GIT_DIR"/rebase/orig-head exit $ret fi diff --git a/t/t3401-rebase-partial.sh b/t/t3401-rebase-partial.sh index 4934a4e01..36d9a2ae3 100755 --- a/t/t3401-rebase-partial.sh +++ b/t/t3401-rebase-partial.sh @@ -50,12 +50,12 @@ test_debug \ test_expect_success \ 'rebase topic branch against new master and check git-am did not get halted' \ - 'git-rebase master && test ! -d .dotest' + 'git-rebase master && test ! -d .git/rebase' test_expect_success \ 'rebase --merge topic branch that was partially merged upstream' \ 'git-checkout -f my-topic-branch-merge && git-rebase --merge master-merge && - test ! -d .git/.dotest-merge' + test ! -d .git/rebase-merge' test_done diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index 092aa2657..ffe3dd97b 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -159,19 +159,19 @@ test_expect_success 'stop on conflicting pick' ' git tag new-branch1 && test_must_fail git rebase -i master && test "$(git rev-parse HEAD~3)" = "$(git rev-parse master)" && - test_cmp expect .git/.dotest-merge/patch && + test_cmp expect .git/rebase-merge/patch && test_cmp expect2 file1 && test "$(git-diff --name-status | sed -n -e "/^U/s/^U[^a-z]*//p")" = file1 && - test 4 = $(grep -v "^#" < .git/.dotest-merge/done | wc -l) && - test 0 = $(grep -c "^[^#]" < .git/.dotest-merge/git-rebase-todo) + test 4 = $(grep -v "^#" < .git/rebase-merge/done | wc -l) && + test 0 = $(grep -c "^[^#]" < .git/rebase-merge/git-rebase-todo) ' test_expect_success 'abort' ' git rebase --abort && test $(git rev-parse new-branch1) = $(git rev-parse HEAD) && test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch1" && - ! test -d .git/.dotest-merge + ! test -d .git/rebase-merge ' test_expect_success 'retain authorship' ' diff --git a/t/t3407-rebase-abort.sh b/t/t3407-rebase-abort.sh index 1777ffe8a..12c8804a0 100755 --- a/t/t3407-rebase-abort.sh +++ b/t/t3407-rebase-abort.sh @@ -74,7 +74,7 @@ testrebase() { ' } -testrebase "" .dotest -testrebase " --merge" .git/.dotest-merge +testrebase "" .git/rebase +testrebase " --merge" .git/rebase-merge test_done diff --git a/t/t4150-am.sh b/t/t4150-am.sh index bc982607d..5cbd5ef67 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -102,7 +102,7 @@ test_expect_success 'am applies patch correctly' ' git checkout first && test_tick && git am >file && git add file && git am --resolved && - ! test -d .dotest && + ! test -d .git/rebase && test goodbye = "$(cat another)" ' test_expect_success 'am takes patches from a Pine mailbox' ' git checkout first && cat pine patch1 | git am && - ! test -d .dotest && + ! test -d .git/rebase && test -z "$(git diff master^..HEAD)" ' test_expect_success 'am fails on mail without patch' ' ! git am >failmail && ! git am file &&