From: Bert Vermeulen Date: Fri, 26 Jul 2013 12:00:23 +0000 (+0200) Subject: sigrok plugin X-Git-Tag: collectd-5.4.0~14^2~13 X-Git-Url: https://git.tokkee.org/?a=commitdiff_plain;h=07a084327b6fa7e54a5101f1e9a23fee7e0721ce;p=collectd.git sigrok plugin --- diff --git a/src/collectd.conf.in b/src/collectd.conf.in index 80aba6a4..542be674 100644 --- a/src/collectd.conf.in +++ b/src/collectd.conf.in @@ -154,6 +154,7 @@ @LOAD_PLUGIN_RRDTOOL@LoadPlugin rrdtool #@BUILD_PLUGIN_SENSORS_TRUE@LoadPlugin sensors #@BUILD_PLUGIN_SERIAL_TRUE@LoadPlugin serial +#@BUILD_PLUGIN_SIGROK_TRUE@LoadPlugin sigrok #@BUILD_PLUGIN_SNMP_TRUE@LoadPlugin snmp #@BUILD_PLUGIN_SWAP_TRUE@LoadPlugin swap #@BUILD_PLUGIN_TABLE_TRUE@LoadPlugin table @@ -890,6 +891,19 @@ # IgnoreSelected false # +# +# LogLevel 3 +# +# Driver "fluke-dmm" +# Interval 10 +# Conn "/dev/ttyUSB2" +# +# +# Driver "cem-dt-885x" +# Conn "/dev/ttyUSB1" +# +# + # # # Type "voltage" diff --git a/src/collectd.conf.pod b/src/collectd.conf.pod index 11db1ccd..fe92aac8 100644 --- a/src/collectd.conf.pod +++ b/src/collectd.conf.pod @@ -5148,6 +5148,72 @@ and all other sensors are collected. =back +=head2 Plugin "sigrok" + +The I plugin uses libsigrok to retrieve measurements from any device +supported by the L project. + +B + + + LogLevel 3 + + Driver "fluke-dmm" + Interval 10 + Conn "/dev/ttyUSB2" + + + Driver "cem-dt-885x" + Conn "/dev/ttyUSB1" + + + +=over 4 + +=item B B<0-5> + +The sigrok logging level to pass on to the collectd log, as a number 0-5. +These levels correspond to None, Errors, Warnings, Informational, Debug +and Spew, respectively. The default is 2 (Warnings). The sigrok log messages, +regardless of their level, are always submitted to collectd at its INFO +log level. + +=item EB IE + +A sigrok-supported device, uniquely identified by this section's options. The +I is passed to collectd as the I. + +=item B + +The sigrok driver to use for this device. + +=item B + +If the device cannot be auto-discovered, or more than one might be discovered +by the driver, I specifies the connection string to the device. It can +be of the form of a serial port (I), or, in case of a non-serial +USB-connected device, the USB VendorID/ProductID separated by a period +(I<0403.6001>). A USB device can also be specified as bus.address +(I<1.41>). + +=item B + +For serial devices with non-standard port settings, this option can be used +to specify them in the form I<9600/8n1>. This should not be necessary; drivers +know how to communicate with devices they support. + +=item B + +Specifies the minimum time between measurement dispatches to collectd, in +seconds. Since some sigrok-supported devices can acquire measurements many +times per second, it may be necessary to throttle these. For example, the +RRD plugin cannot process writes more than once per second. + +The default (and minimum) interval is 1 second. Unused measurements are +discarded. + +=back + =head2 Plugin C Since the configuration of the C is a little more complicated than diff --git a/src/sigrok.c b/src/sigrok.c new file mode 100644 index 00000000..9cb5e30a --- /dev/null +++ b/src/sigrok.c @@ -0,0 +1,361 @@ +/* + * collectd - src/sigrok.c + * Copyright (C) 2013 Bert Vermeulen + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "collectd.h" +#include "common.h" +#include "plugin.h" + +#include +#include +#include +#include +#include + +#include +#include + +/* Minimum interval between dispatches coming from this plugin. The RRD + * plugin, at least, complains when written to with sub-second intervals.*/ +#define DEFAULT_MIN_DISPATCH_INTERVAL TIME_T_TO_CDTIME_T(1) + +static pthread_t sr_thread; +static int sr_thread_running = FALSE; +GSList *config_devices; +static struct sr_session *session = NULL; +static int num_devices; +static int loglevel = SR_LOG_WARN; +static struct sr_context *sr_ctx; + +struct config_device { + char *name; + char *driver; + char *conn; + char *serialcomm; + struct sr_dev_inst *sdi; + cdtime_t min_dispatch_interval; + cdtime_t last_dispatch; +}; + + +static int cd_logger(void *cb_data, int msg_loglevel, const char *format, + va_list args) +{ + char s[512]; + + if (msg_loglevel <= loglevel) { + vsnprintf(s, 512, format, args); + plugin_log(LOG_INFO, "sigrok: %s", s); + } + + return 0; +} + +static int sigrok_config_device(oconfig_item_t *ci) +{ + oconfig_item_t *item; + struct config_device *cfdev; + int ret, i; + + if (ci->values_num != 1 || ci->values[0].type != OCONFIG_TYPE_STRING) { + ERROR("Invalid device name."); + return 1; + } + + if (!(cfdev = malloc(sizeof(struct config_device)))) { + ERROR("malloc() failed."); + return 1; + } + memset(cfdev, 0, sizeof(struct config_device)); + cf_util_get_string(ci, &cfdev->name); + cfdev->min_dispatch_interval = DEFAULT_MIN_DISPATCH_INTERVAL; + + for (i = 0; i < ci->children_num; i++) { + item = ci->children + i; + if (item->values_num != 1) { + ERROR("Missing value for '%s'.", item->key); + return 1; + } + if (!strcasecmp(item->key, "driver")) + ret = cf_util_get_string(item, &cfdev->driver); + else if (!strcasecmp(item->key, "conn")) + ret = cf_util_get_string(item, &cfdev->conn); + else if (!strcasecmp(item->key, "serialcomm")) + ret = cf_util_get_string(item, &cfdev->serialcomm); + else if (!strcasecmp(item->key, "interval")) + ret = cf_util_get_cdtime(item, &cfdev->min_dispatch_interval); + if (ret) { + ERROR("Invalid keyword '%s'.", item->key); + return 1; + } + } + + config_devices = g_slist_append(config_devices, cfdev); + + return 0; +} + +static int sigrok_config(oconfig_item_t *ci) +{ + oconfig_item_t *item; + int tmp, i; + + for (i = 0; i < ci->children_num; i++) { + item = ci->children + i; + if (!strcasecmp(item->key, "loglevel")) { + if (cf_util_get_int(item, &tmp) || tmp < 0 || tmp > 5) { + ERROR("Invalid loglevel"); + return 1; + } + loglevel = tmp; + } else if (!strcasecmp(item->key, "Device")) { + if (sigrok_config_device(item) != 0) + return 1; + } else { + ERROR("Invalid keyword '%s'.", item->key); + return 1; + } + } + + return 0; +} + +static void free_drvopts(struct sr_config *src) +{ + g_variant_unref(src->data); + g_free(src); +} + +static void sigrok_feed_callback(const struct sr_dev_inst *sdi, + const struct sr_datafeed_packet *packet, void *cb_data) +{ + const struct sr_datafeed_analog *analog; + struct config_device *cfdev; + GSList *l; + value_t *values; + value_list_t vl = VALUE_LIST_INIT; + int num_probes, s, p; + + if (packet->type == SR_DF_END) { + /* TODO: try to restart acquisition after a delay? */ + INFO("oops! ended"); + return; + } + + /* Find this device's configuration. */ + cfdev = NULL; + for (l = config_devices; l; l = l->next) { + cfdev = l->data; + if (cfdev->sdi == sdi) { + /* Found it. */ + break; + } + cfdev = NULL; + } + if (!cfdev) { + ERROR("Unknown device instance in sigrok driver %s.", sdi->driver->name); + return; + } + + if (packet->type == SR_DF_ANALOG) { + if (cdtime() - cfdev->last_dispatch < cfdev->min_dispatch_interval) + return; + + analog = packet->payload; + num_probes = g_slist_length(analog->probes); + if (!(values = malloc(sizeof(value_t) * num_probes))) { + ERROR("malloc() failed."); + return; + } + for (s = 0; s < analog->num_samples; s++) { + for (p = 0; p < num_probes; p++) { + values[s + p].gauge = analog->data[s + p]; + } + } + vl.values = values; + vl.values_len = num_probes; + sstrncpy(vl.host, hostname_g, sizeof(vl.host)); + sstrncpy(vl.plugin, "sigrok", sizeof(vl.plugin)); + ssnprintf(vl.plugin_instance, sizeof(vl.plugin_instance), + "%s", cfdev->name); + sstrncpy(vl.type, "gauge", sizeof(vl.type)); + plugin_dispatch_values(&vl); + + cfdev->last_dispatch = cdtime(); + } + +} + +static void *thread_init(void *arg) +{ + struct sr_dev_driver *drv, **drvlist; + struct sr_config *src; + GSList *devlist, *drvopts, *l; + struct config_device *cfdev; + int ret, i; + char hwident[512]; + + (void)arg; + + sr_log_callback_set(cd_logger, NULL); + sr_log_loglevel_set(loglevel); + + if ((ret = sr_init(&sr_ctx)) != SR_OK) { + ERROR("Failed to initialize libsigrok: %s.", sr_strerror(ret)); + return NULL; + } + + if (!(session = sr_session_new())) + return NULL; + + num_devices = 0; + drvlist = sr_driver_list(); + for (l = config_devices; l; l = l->next) { + cfdev = l->data; + drv = NULL; + for (i = 0; drvlist[i]; i++) { + if (!strcmp(drvlist[i]->name, cfdev->driver)) { + drv = drvlist[i]; + break; + } + } + if (!drv) { + ERROR("sigrok: Unknown driver '%s'.", cfdev->driver); + return NULL; + } + + if (sr_driver_init(sr_ctx, drv) != SR_OK) + return NULL; + + drvopts = NULL; + if (cfdev->conn) { + if (!(src = malloc(sizeof(struct sr_config)))) + return NULL; + src->key = SR_CONF_CONN; + src->data = g_variant_new_string(cfdev->conn); + drvopts = g_slist_append(drvopts, src); + } + if (cfdev->serialcomm) { + if (!(src = malloc(sizeof(struct sr_config)))) + return NULL; + src->key = SR_CONF_SERIALCOMM; + src->data = g_variant_new_string(cfdev->serialcomm); + drvopts = g_slist_append(drvopts, src); + } + devlist = sr_driver_scan(drv, drvopts); + g_slist_free_full(drvopts, (GDestroyNotify)free_drvopts); + if (!devlist) + /* No devices found for this driver. */ + continue; + + if (g_slist_length(devlist) > 1) { + INFO("sigrok: %d sigrok devices for device entry '%s': must be 1.", + g_slist_length(devlist), cfdev->name); + return NULL; + } + cfdev->sdi = devlist->data; + g_slist_free(devlist); + ssnprintf(hwident, sizeof(hwident), "%s %s %s", + cfdev->sdi->vendor ? cfdev->sdi->vendor : "", + cfdev->sdi->model ? cfdev->sdi->model : "", + cfdev->sdi->version ? cfdev->sdi->version : ""); + INFO("sigrok: Device '%s' is a %s.", cfdev->name, hwident); + + if (sr_dev_open(cfdev->sdi) != SR_OK) + return NULL; + + if (sr_session_dev_add(cfdev->sdi) != SR_OK) + return NULL; + + num_devices++; + } + + if (num_devices > 0) { + /* Do this only when we're sure there's hardware to talk to. */ + if (sr_session_datafeed_callback_add(sigrok_feed_callback, NULL) != SR_OK) + return NULL; + + /* Start acquisition on all devices. */ + if (sr_session_start() != SR_OK) + return NULL; + + /* Main loop, runs forever. */ + sr_session_run(); + + sr_session_stop(); + sr_session_dev_remove_all(); + } + + sr_session_destroy(); + + sr_exit(sr_ctx); + + pthread_exit(NULL); + sr_thread_running = FALSE; + + return NULL; +} + +static int sigrok_init(void) +{ + int status; + + if (sr_thread_running) { + ERROR("sigrok: Thread already running."); + return -1; + } + + if ((status = plugin_thread_create(&sr_thread, NULL, thread_init, NULL)) != 0) { + ERROR("sigrok: Failed to create thread: %s.", strerror(status)); + return -1; + } + sr_thread_running = TRUE; + + return 0; +} + +static int sigrok_shutdown(void) +{ + struct config_device *cfdev; + GSList *l; + + if (sr_thread_running) { + pthread_cancel(sr_thread); + pthread_join(sr_thread, NULL); + } + + for (l = config_devices; l; l = l->next) { + cfdev = l->data; + free(cfdev->name); + free(cfdev->driver); + free(cfdev->conn); + free(cfdev->serialcomm); + free(cfdev); + } + g_slist_free(config_devices); + + return 0; +} + +void module_register(void) +{ + + plugin_register_complex_config("sigrok", sigrok_config); + plugin_register_init("sigrok", sigrok_init); + plugin_register_shutdown("sigrok", sigrok_shutdown); + +}