post cvs2svn conversion cleanup

git-svn-id: svn://svn.oetiker.ch/rrdtool/trunk@299 a5681a0c-68f1-0310-ab6d-d61299d08faa

diff --git a/CVSROOT/checkoutlist b/CVSROOT/checkoutlist
deleted file mode 100644 (file)
index b04b350..0000000
--- a/CVSROOT/checkoutlist
+++ /dev/null
@@ -1,13 +0,0 @@
-# The "checkoutlist" file is used to support additional version controlled
-# administrative files in $CVSROOT/CVSROOT, such as template files.
-#
-# The first entry on a line is a filename which will be checked out from
-# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
-# The remainder of the line is an error message to use if the file cannot
-# be checked out.
-#
-# File format:
-#
-#      [<whitespace>]<filename><whitespace><error message><end-of-line>
-#
-# comment lines begin with '#'

diff --git a/CVSROOT/commitinfo b/CVSROOT/commitinfo
deleted file mode 100644 (file)
index b19e7b7..0000000
--- a/CVSROOT/commitinfo
+++ /dev/null
@@ -1,15 +0,0 @@
-# The "commitinfo" file is used to control pre-commit checks.
-# The filter on the right is invoked with the repository and a list 
-# of files to check.  A non-zero exit of the filter program will 
-# cause the commit to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

diff --git a/CVSROOT/config b/CVSROOT/config
deleted file mode 100644 (file)
index 8069cad..0000000
--- a/CVSROOT/config
+++ /dev/null
@@ -1,11 +0,0 @@
-# Set this to "no" if pserver shouldn't check system users/passwords
-#SystemAuth=no
-
-# Set `PreservePermissions' to `yes' to save file status information
-# in the repository.
-#PreservePermissions=no
-
-# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
-# level of the new working directory when using the `cvs checkout'
-# command.
-#TopLevelAdmin=no

diff --git a/CVSROOT/cvswrappers b/CVSROOT/cvswrappers
deleted file mode 100644 (file)
index 0accaf1..0000000
--- a/CVSROOT/cvswrappers
+++ /dev/null
@@ -1,23 +0,0 @@
-# This file affects handling of files based on their names.
-#
-# The -t/-f options allow one to treat directories of files
-# as a single file, or to transform a file in other ways on
-# its way in and out of CVS.
-#
-# The -m option specifies whether CVS attempts to merge files.
-#
-# The -k option specifies keyword expansion (e.g. -kb for binary).
-#
-# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
-#
-#  wildcard    [option value][option value]...
-#
-#  where option is one of
-#  -f          from cvs filter         value: path to filter
-#  -t          to cvs filter           value: path to filter
-#  -m          update methodology      value: MERGE or COPY
-#  -k          expansion mode          value: b, o, kkv, &c
-#
-#  and value is a single-quote delimited value.
-# For example:
-#*.gif -k 'b'

diff --git a/CVSROOT/editinfo b/CVSROOT/editinfo
deleted file mode 100644 (file)
index d78886c..0000000
--- a/CVSROOT/editinfo
+++ /dev/null
@@ -1,21 +0,0 @@
-# The "editinfo" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.

diff --git a/CVSROOT/history b/CVSROOT/history
deleted file mode 100644 (file)
index e69de29..0000000

diff --git a/CVSROOT/loginfo b/CVSROOT/loginfo
deleted file mode 100644 (file)
index 5a59f0a..0000000
--- a/CVSROOT/loginfo
+++ /dev/null
@@ -1,26 +0,0 @@
-# The "loginfo" file controls where "cvs commit" log information
-# is sent.  The first entry on a line is a regular expression which must match
-# the directory that the change is being made to, relative to the
-# $CVSROOT.  If a match is found, then the remainder of the line is a filter
-# program that should expect log information on its standard input.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name ALL appears as a regular expression it is always used
-# in addition to the first matching regex or DEFAULT.
-#
-# You may specify a format string as part of the
-# filter.  The string is composed of a `%' followed
-# by a single format character, or followed by a set of format
-# characters surrounded by `{' and `}' as separators.  The format
-# characters are:
-#
-#   s = file name
-#   V = old version number (pre-checkin)
-#   v = new version number (post-checkin)
-#
-# For example:
-#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
-# or
-#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog

diff --git a/CVSROOT/modules b/CVSROOT/modules
deleted file mode 100644 (file)
index cb9e9ef..0000000
--- a/CVSROOT/modules
+++ /dev/null
@@ -1,26 +0,0 @@
-# Three different line formats are valid:
-#      key     -a    aliases...
-#      key [options] directory
-#      key [options] directory files...
-#
-# Where "options" are composed of:
-#      -i prog         Run "prog" on "cvs commit" from top-level of module.
-#      -o prog         Run "prog" on "cvs checkout" of module.
-#      -e prog         Run "prog" on "cvs export" of module.
-#      -t prog         Run "prog" on "cvs rtag" of module.
-#      -u prog         Run "prog" on "cvs update" of module.
-#      -d dir          Place module in directory "dir" instead of module name.
-#      -l              Top-level directory only -- do not recurse.
-#
-# NOTE:  If you change any of the "Run" options above, you'll have to
-# release and re-checkout any working directories of these modules.
-#
-# And "directory" is a path to a directory relative to $CVSROOT.
-#
-# The "-a" option specifies an alias.  An alias is interpreted as if
-# everything on the right of the "-a" had been typed on the command line.
-#
-# You can encode a module within a module by using the special '&'
-# character to interpose another module into the current module.  This
-# can be useful for creating a module that consists of many directories
-# spread out over the entire source repository.

diff --git a/CVSROOT/notify b/CVSROOT/notify
deleted file mode 100644 (file)
index 34f0bc2..0000000
--- a/CVSROOT/notify
+++ /dev/null
@@ -1,12 +0,0 @@
-# The "notify" file controls where notifications from watches set by
-# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
-# a regular expression which is tested against the directory that the
-# change is being made to, relative to the $CVSROOT.  If it matches,
-# then the remainder of the line is a filter program that should contain
-# one occurrence of %s for the user to notify, and information on its
-# standard input.
-#
-# "ALL" or "DEFAULT" can be used in place of the regular expression.
-#
-# For example:
-#ALL mail %s -s "CVS notification"

diff --git a/CVSROOT/rcsinfo b/CVSROOT/rcsinfo
deleted file mode 100644 (file)
index 49e59f4..0000000
--- a/CVSROOT/rcsinfo
+++ /dev/null
@@ -1,13 +0,0 @@
-# The "rcsinfo" file is used to control templates with which the editor
-# is invoked on commit and import.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being made to, relative to the
-# $CVSROOT.  For the first match that is found, then the remainder of the
-# line is the name of the file that contains the template.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

diff --git a/CVSROOT/taginfo b/CVSROOT/taginfo
deleted file mode 100644 (file)
index 274a46d..0000000
--- a/CVSROOT/taginfo
+++ /dev/null
@@ -1,20 +0,0 @@
-# The "taginfo" file is used to control pre-tag checks.
-# The filter on the right is invoked with the following arguments:
-#
-# $1 -- tagname
-# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
-# $3 -- repository
-# $4->  file revision [file revision ...]
-#
-# A non-zero exit of the filter program will cause the tag to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

diff --git a/CVSROOT/verifymsg b/CVSROOT/verifymsg
deleted file mode 100644 (file)
index 86f747c..0000000
--- a/CVSROOT/verifymsg
+++ /dev/null
@@ -1,21 +0,0 @@
-# The "verifymsg" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.

diff --git a/rrdtool/README b/rrdtool/README
deleted file mode 100644 (file)
index 0f970f5..0000000
--- a/rrdtool/README
+++ /dev/null
@@ -1 +0,0 @@
-initital file of rrdtool-1.1