git-cvsserver: add ability to guess -kb from contents

If "gitcvs.allbinary" is set to "guess", then any file that has
not been explicitly marked as binary or text using the "crlf" attribute
and the "gitcvs.usecrlfattr" config will guess binary based on the contents
of the file.

Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff --git a/Documentation/config.txt b/Documentation/config.txt
index 036e61e2f692b59c252dfafa54b138bd03bc8076..917ef5b4febaedece798aa4a97e9ebf90ff13d36 100644 (file)
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -670,11 +670,14 @@ gitcvs.usecrlfattr
        then 'gitcvs.allbinary' is used. See linkgit:gitattribute[5].
 
 gitcvs.allbinary::
-       If true, all files not otherwise specified using
-       'gitcvs.usecrlfattr' and an explicitly set or unset `crlf`
-       attribute are sent to the client in mode '-kb'. This
-       causes the client to treat them as binary files which
-       suppresses any newline munging it otherwise might do.
+       This is used if 'gitcvs.usecrlfattr' does not resolve
+       the correct '-kb' mode to use. If true, all
+       unresolved files are sent to the client in
+       mode '-kb'. This causes the client to treat them
+       as binary files, which suppresses any newline munging it
+       otherwise might do. Alternatively, if it is set to "guess",
+       then the contents of the file are examined to decide if
+       it is binary, similar to 'core.autocrlf'.
 
 gitcvs.dbname::
        Database used by git-cvsserver to cache revision information

diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt
index 4888b8604df802248145ea103a893d4d5370594a..cd0685ea67deaff81bcd997ff6ea4ae623c7a027 100644 (file)
--- a/Documentation/git-cvsserver.txt
+++ b/Documentation/git-cvsserver.txt
@@ -311,17 +311,23 @@ to crlf conversion on some platforms.
 You can make the server use `crlf` attributes to set the '-k' modes
 for files by setting the `gitcvs.usecrlfattr` config variable.
 In this case, if `crlf` is explicitly unset ('-crlf'), then the
-will set '-kb' mode, for binary files.  If it `crlf` is set,
+server will set '-kb' mode for binary files. If `crlf` is set,
 then the '-k' mode will explicitly be left blank.  See
 also linkgit:gitattributes[5] for more information about the `crlf`
 attribute.
 
 Alternatively, if `gitcvs.usecrlfattr` config is not enabled
 or if the `crlf` attribute is unspecified for a filename, then
-the server uses the `gitcvs.allbinary` for the default setting.
-If `gitcvs.allbinary` is set, then the files not otherwise
+the server uses the `gitcvs.allbinary` config for the default setting.
+If `gitcvs.allbinary` is set, then file not otherwise
 specified will default to '-kb' mode. Otherwise the '-k' mode
-is left blank.
+is left blank. But if `gitcvs.allbinary` is set to "guess", then
+the correct '-k' mode will be guessed based on the contents of
+the file.
+
+For best consistency with cvs, it is probably best to override the
+defaults by setting `gitcvs.usecrlfattr` to true,
+and `gitcvs.allbinary` to "guess".
 
 Dependencies
 ------------

diff --git a/git-cvsserver.perl b/git-cvsserver.perl
index 58206aed7cb006c594530953fc4e05857c96ed2d..920bbe15a3bbc7768d47a2adbc84aa81264e2226 100755 (executable)
--- a/git-cvsserver.perl
+++ b/git-cvsserver.perl
@@ -502,7 +502,7 @@ sub req_add
                 print $state->{CVSROOT} . "/$state->{module}/$filename\n";
 
                 # this is an "entries" line
-                my $kopts = kopts_from_path($filename);
+                my $kopts = kopts_from_path($filename,"sha1",$meta->{filehash});
                 $log->debug("/$filepart/1.$meta->{revision}//$kopts/");
                 print "/$filepart/1.$meta->{revision}//$kopts/\n";
                 # permissions
@@ -533,7 +533,8 @@ sub req_add
 
         print "Checked-in $dirpart\n";
         print "$filename\n";
-        my $kopts = kopts_from_path($filename);
+        my $kopts = kopts_from_path($filename,"file",
+                        $state->{entries}{$filename}{modified_filename});
         print "/$filepart/0//$kopts/\n";
 
         my $requestedKopts = $state->{opt}{k};
@@ -631,7 +632,7 @@ sub req_remove
 
         print "Checked-in $dirpart\n";
         print "$filename\n";
-        my $kopts = kopts_from_path($filename);
+        my $kopts = kopts_from_path($filename,"sha1",$meta->{filehash});
         print "/$filepart/-1.$wrev//$kopts/\n";
 
         $rmcount++;
@@ -910,7 +911,7 @@ sub req_co
        print $state->{CVSROOT} . "/$module/" . ( defined ( $git->{dir} ) and $git->{dir} ne "./" ? $git->{dir} . "/" : "" ) . "$git->{name}\n";
 
         # this is an "entries" line
-        my $kopts = kopts_from_path($fullName);
+        my $kopts = kopts_from_path($fullName,"sha1",$git->{filehash});
         print "/$git->{name}/1.$git->{revision}//$kopts/\n";
         # permissions
         print "u=$git->{mode},g=$git->{mode},o=$git->{mode}\n";
@@ -1119,7 +1120,7 @@ sub req_update
                print $state->{CVSROOT} . "/$state->{module}/$filename\n";
 
                # this is an "entries" line
-               my $kopts = kopts_from_path($filename);
+               my $kopts = kopts_from_path($filename,"sha1",$meta->{filehash});
                $log->debug("/$filepart/1.$meta->{revision}//$kopts/");
                print "/$filepart/1.$meta->{revision}//$kopts/\n";
 
@@ -1167,7 +1168,8 @@ sub req_update
                     print "Merged $dirpart\n";
                     $log->debug($state->{CVSROOT} . "/$state->{module}/$filename");
                     print $state->{CVSROOT} . "/$state->{module}/$filename\n";
-                    my $kopts = kopts_from_path("$dirpart/$filepart");
+                    my $kopts = kopts_from_path("$dirpart/$filepart",
+                                                "file",$mergedFile);
                     $log->debug("/$filepart/1.$meta->{revision}//$kopts/");
                     print "/$filepart/1.$meta->{revision}//$kopts/\n";
                 }
@@ -1183,7 +1185,8 @@ sub req_update
                 {
                     print "Merged $dirpart\n";
                     print $state->{CVSROOT} . "/$state->{module}/$filename\n";
-                    my $kopts = kopts_from_path("$dirpart/$filepart");
+                    my $kopts = kopts_from_path("$dirpart/$filepart",
+                                                "file",$mergedFile);
                     print "/$filepart/1.$meta->{revision}/+/$kopts/\n";
                 }
             }
@@ -1434,7 +1437,7 @@ sub req_ci
             }
             print "Checked-in $dirpart\n";
             print "$filename\n";
-            my $kopts = kopts_from_path($filename);
+            my $kopts = kopts_from_path($filename,"sha1",$meta->{filehash});
             print "/$filepart/1.$meta->{revision}//$kopts/\n";
         }
     }
@@ -2312,7 +2315,7 @@ sub cleanupTmpDir
 # file should get -kb.
 sub kopts_from_path
 {
-       my ($path) = @_;
+    my ($path, $srcType, $name) = @_;
 
     if ( defined ( $cfg->{gitcvs}{usecrlfattr} ) and
          $cfg->{gitcvs}{usecrlfattr} =~ /\s*(1|true|yes)\s*$/i )
@@ -2332,15 +2335,55 @@ sub kopts_from_path
         }
     }
 
-    unless ( defined ( $cfg->{gitcvs}{allbinary} ) and $cfg->{gitcvs}{allbinary} =~ /^\s*(1|true|yes)\s*$/i )
+    if ( defined ( $cfg->{gitcvs}{allbinary} ) )
     {
-               # Return "" to give no special treatment to any path
-               return "";
-    } else {
-               # Alternatively, to have all files treated as if they are binary (which
-               # is more like git itself), always return the "-kb" option
-               return "-kb";
+        if( ($cfg->{gitcvs}{allbinary} =~ /^\s*(1|true|yes)\s*$/i) )
+        {
+            return "-kb";
+        }
+        elsif( ($cfg->{gitcvs}{allbinary} =~ /^\s*guess\s*$/i) )
+        {
+            if( $srcType eq "sha1Or-k" &&
+                !defined($name) )
+            {
+                my ($ret)=$state->{entries}{$path}{options};
+                if( !defined($ret) )
+                {
+                    $ret=$state->{opt}{k};
+                    if(defined($ret))
+                    {
+                        $ret="-k$ret";
+                    }
+                    else
+                    {
+                        $ret="";
+                    }
+                }
+                if( ! ($ret=~/^(|-kb|-kkv|-kkvl|-kk|-ko|-kv)$/) )
+                {
+                    print "E Bad -k option\n";
+                    $log->warn("Bad -k option: $ret");
+                    die "Error: Bad -k option: $ret\n";
+                }
+
+                return $ret;
+            }
+            else
+            {
+                if( is_binary($srcType,$name) )
+                {
+                    $log->debug("... as binary");
+                    return "-kb";
+                }
+                else
+                {
+                    $log->debug("... as text");
+                }
+            }
+        }
     }
+    # Return "" to give no special treatment to any path
+    return "";
 }
 
 sub check_attr
@@ -2360,6 +2403,124 @@ sub check_attr
     }
 }
 
+# This should have the same heuristics as convert.c:is_binary() and related.
+# Note that the bare CR test is done by callers in convert.c.
+sub is_binary
+{
+    my ($srcType,$name) = @_;
+    $log->debug("is_binary($srcType,$name)");
+
+    # Minimize amount of interpreted code run in the inner per-character
+    # loop for large files, by totalling each character value and
+    # then analyzing the totals.
+    my @counts;
+    my $i;
+    for($i=0;$i<256;$i++)
+    {
+        $counts[$i]=0;
+    }
+
+    my $fh = open_blob_or_die($srcType,$name);
+    my $line;
+    while( defined($line=<$fh>) )
+    {
+        # Any '\0' and bare CR are considered binary.
+        if( $line =~ /\0|(\r[^\n])/ )
+        {
+            close($fh);
+            return 1;
+        }
+
+        # Count up each character in the line:
+        my $len=length($line);
+        for($i=0;$i<$len;$i++)
+        {
+            $counts[ord(substr($line,$i,1))]++;
+        }
+    }
+    close $fh;
+
+    # Don't count CR and LF as either printable/nonprintable
+    $counts[ord("\n")]=0;
+    $counts[ord("\r")]=0;
+
+    # Categorize individual character count into printable and nonprintable:
+    my $printable=0;
+    my $nonprintable=0;
+    for($i=0;$i<256;$i++)
+    {
+        if( $i < 32 &&
+            $i != ord("\b") &&
+            $i != ord("\t") &&
+            $i != 033 &&       # ESC
+            $i != 014 )        # FF
+        {
+            $nonprintable+=$counts[$i];
+        }
+        elsif( $i==127 )  # DEL
+        {
+            $nonprintable+=$counts[$i];
+        }
+        else
+        {
+            $printable+=$counts[$i];
+        }
+    }
+
+    return ($printable >> 7) < $nonprintable;
+}
+
+# Returns open file handle.  Possible invocations:
+#  - open_blob_or_die("file",$filename);
+#  - open_blob_or_die("sha1",$filehash);
+sub open_blob_or_die
+{
+    my ($srcType,$name) = @_;
+    my ($fh);
+    if( $srcType eq "file" )
+    {
+        if( !open $fh,"<",$name )
+        {
+            $log->warn("Unable to open file $name: $!");
+            die "Unable to open file $name: $!\n";
+        }
+    }
+    elsif( $srcType eq "sha1" || $srcType eq "sha1Or-k" )
+    {
+        unless ( defined ( $name ) and $name =~ /^[a-zA-Z0-9]{40}$/ )
+        {
+            $log->warn("Need filehash");
+            die "Need filehash\n";
+        }
+
+        my $type = `git cat-file -t $name`;
+        chomp $type;
+
+        unless ( defined ( $type ) and $type eq "blob" )
+        {
+            $log->warn("Invalid type '$type' for '$name'");
+            die ( "Invalid type '$type' (expected 'blob')" )
+        }
+
+        my $size = `git cat-file -s $name`;
+        chomp $size;
+
+        $log->debug("open_blob_or_die($name) size=$size, type=$type");
+
+        unless( open $fh, '-|', "git", "cat-file", "blob", $name )
+        {
+            $log->warn("Unable to open sha1 $name");
+            die "Unable to open sha1 $name\n";
+        }
+    }
+    else
+    {
+        $log->warn("Unknown type of blob source: $srcType");
+        die "Unknown type of blob source: $srcType\n";
+    }
+    return $fh;
+}
+
 # Generate a CVS author name from Git author information, by taking
 # the first eight characters of the user part of the email address.
 sub cvs_author

diff --git a/t/t9401-git-cvsserver-crlf.sh b/t/t9401-git-cvsserver-crlf.sh
index b7a779b788c281611c50ab17d6dcb9e7136dc4e9..e27a1c5f85bbecac652ce8d224f8fc5e99b02a4e 100755 (executable)
--- a/t/t9401-git-cvsserver-crlf.sh
+++ b/t/t9401-git-cvsserver-crlf.sh
@@ -175,4 +175,163 @@ test_expect_success 'updating' '
     cmp cvswork/binfile.bin tmpExpect1
 '
 
+rm -rf cvswork
+test_expect_success 'cvs co (use attributes/guess)' '
+    GIT_DIR="$SERVERDIR" git config gitcvs.allbinary guess &&
+    GIT_CONFIG="$git_config" cvs -Q co -d cvswork master >cvs.log 2>&1 &&
+    marked_as cvswork textfile.c "" &&
+    marked_as cvswork binfile.bin -kb &&
+    marked_as cvswork .gitattributes "" &&
+    marked_as cvswork mixedUp.c "" &&
+    marked_as cvswork/subdir withCr.bin -kb &&
+    marked_as cvswork/subdir file.h "" &&
+    marked_as cvswork/subdir unspecified.other "" &&
+    marked_as cvswork/subdir newfile.bin -kb &&
+    marked_as cvswork/subdir newfile.c ""
+'
+
+test_expect_success 'setup multi-line files' '
+    ( echo "line 1" &&
+      echo "line 2" &&
+      echo "line 3" &&
+      echo "line 4 with NUL: Q <-" ) | q_to_nul > multiline.c &&
+    git add multiline.c &&
+    ( echo "line 1" &&
+      echo "line 2" &&
+      echo "line 3" &&
+      echo "line 4" ) | q_to_nul > multilineTxt.c &&
+    git add multilineTxt.c &&
+    git commit -q -m "multiline files" &&
+    git push gitcvs.git >/dev/null
+'
+
+rm -rf cvswork
+test_expect_success 'cvs co (guess)' '
+    GIT_DIR="$SERVERDIR" git config --bool gitcvs.usecrlfattr false &&
+    GIT_CONFIG="$git_config" cvs -Q co -d cvswork master >cvs.log 2>&1 &&
+    marked_as cvswork textfile.c "" &&
+    marked_as cvswork binfile.bin -kb &&
+    marked_as cvswork .gitattributes "" &&
+    marked_as cvswork mixedUp.c -kb &&
+    marked_as cvswork multiline.c -kb &&
+    marked_as cvswork multilineTxt.c "" &&
+    marked_as cvswork/subdir withCr.bin -kb &&
+    marked_as cvswork/subdir file.h "" &&
+    marked_as cvswork/subdir unspecified.other "" &&
+    marked_as cvswork/subdir newfile.bin "" &&
+    marked_as cvswork/subdir newfile.c ""
+'
+
+test_expect_success 'cvs co another copy (guess)' '
+    GIT_CONFIG="$git_config" cvs -Q co -d cvswork2 master >cvs.log 2>&1 &&
+    marked_as cvswork2 textfile.c "" &&
+    marked_as cvswork2 binfile.bin -kb &&
+    marked_as cvswork2 .gitattributes "" &&
+    marked_as cvswork2 mixedUp.c -kb &&
+    marked_as cvswork2 multiline.c -kb &&
+    marked_as cvswork2 multilineTxt.c "" &&
+    marked_as cvswork2/subdir withCr.bin -kb &&
+    marked_as cvswork2/subdir file.h "" &&
+    marked_as cvswork2/subdir unspecified.other "" &&
+    marked_as cvswork2/subdir newfile.bin "" &&
+    marked_as cvswork2/subdir newfile.c ""
+'
+
+test_expect_success 'add text (guess)' '
+    cd cvswork &&
+    echo "simpleText" > simpleText.c &&
+    GIT_CONFIG="$git_config" cvs -Q add simpleText.c &&
+    cd .. &&
+    marked_as cvswork simpleText.c ""
+'
+
+test_expect_success 'add bin (guess)' '
+    cd cvswork &&
+    echo "simpleBin: NUL: Q <- there" | q_to_nul > simpleBin.bin &&
+    GIT_CONFIG="$git_config" cvs -Q add simpleBin.bin &&
+    cd .. &&
+    marked_as cvswork simpleBin.bin -kb
+'
+
+test_expect_success 'remove files (guess)' '
+    cd cvswork &&
+    GIT_CONFIG="$git_config" cvs -Q rm -f subdir/file.h &&
+    cd subdir &&
+    GIT_CONFIG="$git_config" cvs -Q rm -f withCr.bin &&
+    cd ../.. &&
+    marked_as cvswork/subdir withCr.bin -kb &&
+    marked_as cvswork/subdir file.h ""
+'
+
+test_expect_success 'cvs ci (guess)' '
+    cd cvswork &&
+    GIT_CONFIG="$git_config" cvs -Q ci -m "add/rm files" >cvs.log 2>&1 &&
+    cd .. &&
+    marked_as cvswork textfile.c "" &&
+    marked_as cvswork binfile.bin -kb &&
+    marked_as cvswork .gitattributes "" &&
+    marked_as cvswork mixedUp.c -kb &&
+    marked_as cvswork multiline.c -kb &&
+    marked_as cvswork multilineTxt.c "" &&
+    not_present cvswork/subdir withCr.bin &&
+    not_present cvswork/subdir file.h &&
+    marked_as cvswork/subdir unspecified.other "" &&
+    marked_as cvswork/subdir newfile.bin "" &&
+    marked_as cvswork/subdir newfile.c "" &&
+    marked_as cvswork simpleBin.bin -kb &&
+    marked_as cvswork simpleText.c ""
+'
+
+test_expect_success 'update subdir of other copy (guess)' '
+    cd cvswork2/subdir &&
+    GIT_CONFIG="$git_config" cvs -Q update &&
+    cd ../.. &&
+    marked_as cvswork2 textfile.c "" &&
+    marked_as cvswork2 binfile.bin -kb &&
+    marked_as cvswork2 .gitattributes "" &&
+    marked_as cvswork2 mixedUp.c -kb &&
+    marked_as cvswork2 multiline.c -kb &&
+    marked_as cvswork2 multilineTxt.c "" &&
+    not_present cvswork2/subdir withCr.bin &&
+    not_present cvswork2/subdir file.h &&
+    marked_as cvswork2/subdir unspecified.other "" &&
+    marked_as cvswork2/subdir newfile.bin "" &&
+    marked_as cvswork2/subdir newfile.c "" &&
+    not_present cvswork2 simpleBin.bin &&
+    not_present cvswork2 simpleText.c
+'
+
+echo "starting update/merge" >> "${WORKDIR}/marked.log"
+test_expect_success 'update/merge full other copy (guess)' '
+    git pull gitcvs.git master &&
+    sed "s/3/replaced_3/" < multilineTxt.c > ml.temp &&
+    mv ml.temp multilineTxt.c &&
+    git add multilineTxt.c &&
+    git commit -q -m "modify multiline file" >> "${WORKDIR}/marked.log" &&
+    git push gitcvs.git >/dev/null &&
+    cd cvswork2 &&
+    sed "s/1/replaced_1/" < multilineTxt.c > ml.temp &&
+    mv ml.temp multilineTxt.c &&
+    GIT_CONFIG="$git_config" cvs update > cvs.log 2>&1 &&
+    cd .. &&
+    marked_as cvswork2 textfile.c "" &&
+    marked_as cvswork2 binfile.bin -kb &&
+    marked_as cvswork2 .gitattributes "" &&
+    marked_as cvswork2 mixedUp.c -kb &&
+    marked_as cvswork2 multiline.c -kb &&
+    marked_as cvswork2 multilineTxt.c "" &&
+    not_present cvswork2/subdir withCr.bin &&
+    not_present cvswork2/subdir file.h &&
+    marked_as cvswork2/subdir unspecified.other "" &&
+    marked_as cvswork2/subdir newfile.bin "" &&
+    marked_as cvswork2/subdir newfile.c "" &&
+    marked_as cvswork2 simpleBin.bin -kb &&
+    marked_as cvswork2 simpleText.c "" &&
+    echo "line replaced_1" > tmpExpect2 &&
+    echo "line 2" >> tmpExpect2 &&
+    echo "line replaced_3" >> tmpExpect2 &&
+    echo "line 4" | q_to_nul >> tmpExpect2 &&
+    cmp cvswork2/multilineTxt.c tmpExpect2
+'
+
 test_done