Merge branch 'cn/pull-rebase-message'

By Carlos Martín Nieto
* cn/pull-rebase-message:
  Make git-{pull,rebase} message without tracking information friendlier

diff --git a/Documentation/RelNotes/1.7.10.txt b/Documentation/RelNotes/1.7.10.txt
index 7813ea12cc235a38b2e00a65a62f158d0ab4efa7..b966a8e85362f578750b8968ac47f61fb319d216 100644 (file)
--- a/Documentation/RelNotes/1.7.10.txt
+++ b/Documentation/RelNotes/1.7.10.txt
@@ -52,6 +52,9 @@ UI, Workflows & Features
 
  * "git push" learned the "--prune" option, similar to "git fetch".
 
+ * "git symbolic-ref" learned the "--short" option to abbreviate the
+   refname it shows unambiguously.
+
  * "git tag --list" can be given "--points-at <object>" to limit its
    output to those that point at the given object.
 
@@ -64,6 +67,9 @@ UI, Workflows & Features
    needed (including the ones that are not necessary for a specific
    task).
 
+ * Project search in "gitweb" shows the substring that matched in the
+   project name and description highlighted.
+
 Foreign Interface
 
  * Improved handling of views, labels and branches in git-p4 (in contrib).
@@ -112,39 +118,10 @@ Unless otherwise noted, all the fixes since v1.7.9 in the maintenance
 releases are contained in this release (see release notes to them for
 details).
 
- * "git branch --with $that" assumed incorrectly that the user will never
-   ask the question with nonsense value in $that.
-   (merge 6c41e97 cn/maint-branch-with-bad later to maint).
-
- * An invalid regular expression pattern given by an end user made
-   "gitweb" to return garbled response.
-   (merge 36612e4 jn/maint-gitweb-invalid-regexp later to maint).
-
- * "git rev-list --verify-objects -q" omitted the extra verification
-   it needs to do over "git rev-list --objects -q" by mistake.
-   (merge 9899372 nd/maint-verify-objects later to maint).
-
- * The bulk check-in codepath streamed contents that needs
-   smudge/clean filters without running them, instead of punting and
-   delegating to the codepath to run filters after slurping everything
-   to core.
-   (merge 4f22b10 jk/maint-avoid-streaming-filtered-contents later to maint).
-
- * When the filter driver exits before reading the content before the
-   main git process writes the contents to be filtered to the pipe to
-   it, the latter could be killed with SIGPIPE instead of ignoring
-   such an event as an error.
-   (merge 6424c2a jb/filter-ignore-sigpipe later to maint).
-
- * When a remote helper exits before reading the blank line from the
-   main git process to signal the end of commands, the latter could be
-   killed with SIGPIPE. Instead we should ignore such event as a
-   non-error.
-   (merge c34fe63 sp/smart-http-failure-to-push later to maint).
-
- * "git bundle create" produced a corrupt bundle file upon seeing
-   commits with excessively long subject line.
-   (merge 8a557bb tr/maint-bundle-long-subject later to maint).
+ * The code to synthesize the fake ancestor tree used by 3-way merge
+   fallback in "git am" was not prepared to read a patch created with
+   a non-standard -p<num> value.
+   (merge a61ba26 jc/am-3-nonstandard-popt later to maint).
 
  * "gitweb" used to drop warnings in the log file when "heads" view is
    accessed in a repository whose HEAD does not point at a valid
@@ -152,7 +129,7 @@ details).
 
 ---
 exec >/var/tmp/1
-O=v1.7.9.2-358-g64d1544
+O=v1.7.9.2-383-gb8b5290
 echo O=$(git describe)
 git log --first-parent --oneline ^maint $O..
 echo

diff --git a/Documentation/RelNotes/1.7.9.3.txt b/Documentation/RelNotes/1.7.9.3.txt
index d7be177681f9cef64ad7e6e6498baca00973eb0a..91c65012f981ff3791bebf74c44e5ebb8cfbac4c 100644 (file)
--- a/Documentation/RelNotes/1.7.9.3.txt
+++ b/Documentation/RelNotes/1.7.9.3.txt
@@ -11,14 +11,41 @@ Fixes since v1.7.9.2
    to link the binary with -lintl even when libintl.h is missing from
    the system.
 
+ * When the filter driver exits before reading the content before the
+   main git process writes the contents to be filtered to the pipe to
+   it, the latter could be killed with SIGPIPE instead of ignoring
+   such an event as an error.
+
  * "git add --refresh <pathspec>" used to warn about unmerged paths
    outside the given pathspec.
 
+ * The bulk check-in codepath in "git add" streamed contents that
+   needs smudge/clean filters without running them, instead of punting
+   and delegating to the codepath to run filters after slurping
+   everything to core.
+
+ * "git branch --with $that" assumed incorrectly that the user will never
+   ask the question with nonsense value in $that.
+
+ * "git bundle create" produced a corrupt bundle file upon seeing
+   commits with excessively long subject line.
+
+ * When a remote helper exits before reading the blank line from the
+   main git process to signal the end of commands, the latter could be
+   killed with SIGPIPE. Instead we should ignore such event as a
+   non-error.
+
  * The commit log template given with "git merge --edit" did not have
    a short instructive text like what "git commit" gives.
 
+ * "git rev-list --verify-objects -q" omitted the extra verification
+   it needs to do over "git rev-list --objects -q" by mistake.
+
  * "gitweb" used to drop warnings in the log file when "heads" view is
    accessed in a repository whose HEAD does not point at a valid
    branch.
 
+ * An invalid regular expression pattern given by an end user made
+   "gitweb" to return garbled response.
+
 Also contains minor fixes and documentation updates.

diff --git a/Documentation/config.txt b/Documentation/config.txt
index 5367ba9cae84c54b1c1b5b26fd7b4bd69383f832..c081657be774a70b453f493be11fbfb670452e86 100644 (file)
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -1275,9 +1275,10 @@ help.autocorrect::
        This is the default.
 
 http.proxy::
-       Override the HTTP proxy, normally configured using the 'http_proxy'
-       environment variable (see linkgit:curl[1]).  This can be overridden
-       on a per-remote basis; see remote.<name>.proxy
+       Override the HTTP proxy, normally configured using the 'http_proxy',
+       'https_proxy', and 'all_proxy' environment variables (see
+       `curl(1)`).  This can be overridden on a per-remote basis; see
+       remote.<name>.proxy
 
 http.cookiefile::
        File containing previously stored cookie lines which should be used

diff --git a/Documentation/diff-config.txt b/Documentation/diff-config.txt
index 1aed79e7dc451f02e1b15dd0644c89fee6071703..6aa1be04787b998d12b873afc98d9b498c942363 100644 (file)
--- a/Documentation/diff-config.txt
+++ b/Documentation/diff-config.txt
@@ -52,6 +52,10 @@ directories with less than 10% of the total amount of changed files,
 and accumulating child directory counts in the parent directories:
 `files,10,cumulative`.
 
+diff.statGraphWidth::
+       Limit the width of the graph part in --stat output. If set, applies
+       to all commands generating --stat outuput except format-patch.
+
 diff.external::
        If this config variable is set, diff generation is not
        performed using the internal diff machinery, but using the

diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt
index 9f7cba2be6a97cb85072d22b3317d37d1afe80bf..7d4566f829e860758328309c377608a1083b0298 100644 (file)
--- a/Documentation/diff-options.txt
+++ b/Documentation/diff-options.txt
@@ -52,14 +52,23 @@ endif::git-format-patch[]
 --patience::
        Generate a diff using the "patience diff" algorithm.
 
+--histogram::
+       Generate a diff using the "histogram diff" algorithm.
+
 --stat[=<width>[,<name-width>[,<count>]]]::
-       Generate a diffstat.  You can override the default
-       output width for 80-column terminal by `--stat=<width>`.
-       The width of the filename part can be controlled by
-       giving another width to it separated by a comma.
+       Generate a diffstat. By default, as much space as necessary
+       will be used for the filename part, and the rest for the graph
+       part. Maximum width defaults to terminal width, or 80 columns
+       if not connected to a terminal, and can be overriden by
+       `<width>`. The width of the filename part can be limited by
+       giving another width `<name-width>` after a comma. The width
+       of the graph part can be limited by using
+       `--stat-graph-width=<width>` (affects all commands generating
+       a stat graph) or by setting `diff.statGraphWidth=<width>`
+       (does not affect `git format-patch`).
        By giving a third parameter `<count>`, you can limit the
-       output to the first `<count>` lines, followed by
-       `...` if there are more.
+       output to the first `<count>` lines, followed by `...` if
+       there are more.
 +
 These parameters can also be set individually with `--stat-width=<width>`,
 `--stat-name-width=<name-width>` and `--stat-count=<count>`.

diff --git a/Documentation/git-fsck.txt b/Documentation/git-fsck.txt
index 47e2f19218aa2cfb93819d2e0adc58f0b611df96..bbb25da2dd601cd9ddcdbeae525c82a08fbfde4a 100644 (file)
--- a/Documentation/git-fsck.txt
+++ b/Documentation/git-fsck.txt
@@ -33,7 +33,7 @@ index file, all SHA1 references in .git/refs/*, and all reflogs (unless
 --dangling::
 --no-dangling::
        Print objects that exist but that are never 'directly' used (default).
-       `--no-dangling` can be used to squech this information from the output.
+       `--no-dangling` can be used to omit this information from the output.
 
 --root::
        Report root nodes.

diff --git a/Documentation/git-symbolic-ref.txt b/Documentation/git-symbolic-ref.txt
index a45d4c4f29635a4fdcdeb2d15950925313920741..981d3a8fc12cde403cd2d29c86a63b56ca3028b3 100644 (file)
--- a/Documentation/git-symbolic-ref.txt
+++ b/Documentation/git-symbolic-ref.txt
@@ -8,7 +8,8 @@ git-symbolic-ref - Read and modify symbolic refs
 SYNOPSIS
 --------
 [verse]
-'git symbolic-ref' [-q] [-m <reason>] <name> [<ref>]
+'git symbolic-ref' [-m <reason>] <name> <ref>
+'git symbolic-ref' [-q] [--short] <name>
 
 DESCRIPTION
 -----------
@@ -33,6 +34,10 @@ OPTIONS
        symbolic ref but a detached HEAD; instead exit with
        non-zero status silently.
 
+--short::
+       When showing the value of <name> as a symbolic ref, try to shorten the
+       value, e.g. from `refs/heads/master` to `master`.
+
 -m::
        Update the reflog for <name> with <reason>.  This is valid only
        when creating or updating a symbolic ref.

diff --git a/Documentation/git.txt b/Documentation/git.txt
index 22fadeb114b56249920a3338a6ceb7bd71615a79..b257d80c756cb7bf45ff1a57abd5488e3ad8f5f6 100644 (file)
--- a/Documentation/git.txt
+++ b/Documentation/git.txt
@@ -44,9 +44,10 @@ unreleased) version of git, that is available from 'master'
 branch of the `git.git` repository.
 Documentation for older releases are available here:
 
-* link:v1.7.9.2/git.html[documentation for release 1.7.9.2]
+* link:v1.7.9.3/git.html[documentation for release 1.7.9.3]
 
 * release notes for
+  link:RelNotes/1.7.9.3.txt[1.7.9.3],
   link:RelNotes/1.7.9.2.txt[1.7.9.2],
   link:RelNotes/1.7.9.1.txt[1.7.9.1],
   link:RelNotes/1.7.9.txt[1.7.9].

diff --git a/builtin/diff.c b/builtin/diff.c
index 387afa75680d813bccd5493e5946600c08679890..424c815f9bc2ca8f87eb4694d1375b949b635170 100644 (file)
--- a/builtin/diff.c
+++ b/builtin/diff.c
@@ -285,6 +285,10 @@ int cmd_diff(int argc, const char **argv, const char *prefix)
        /* Otherwise, we are doing the usual "git" diff */
        rev.diffopt.skip_stat_unmatch = !!diff_auto_refresh_index;
 
+       /* Scale to real terminal size and respect statGraphWidth config */
+       rev.diffopt.stat_width = -1;
+       rev.diffopt.stat_graph_width = -1;
+
        /* Default to let external and textconv be used */
        DIFF_OPT_SET(&rev.diffopt, ALLOW_EXTERNAL);
        DIFF_OPT_SET(&rev.diffopt, ALLOW_TEXTCONV);

diff --git a/builtin/log.c b/builtin/log.c
index 7d1f6f88a0e0f76bc8ee35155a532b641c14a845..8a47012b0bd2fefe616c44b918d16a18463b5d2a 100644 (file)
--- a/builtin/log.c
+++ b/builtin/log.c
@@ -77,6 +77,8 @@ static void cmd_log_init_defaults(struct rev_info *rev)
                get_commit_format(fmt_pretty, rev);
        rev->verbose_header = 1;
        DIFF_OPT_SET(&rev->diffopt, RECURSIVE);
+       rev->diffopt.stat_width = -1; /* use full terminal width */
+       rev->diffopt.stat_graph_width = -1; /* respect statGraphWidth config */
        rev->abbrev_commit = default_abbrev_commit;
        rev->show_root_diff = default_show_root;
        rev->subject_prefix = fmt_patch_subject_prefix;
@@ -447,6 +449,8 @@ int cmd_show(int argc, const char **argv, const char *prefix)
        rev.diff = 1;
        rev.always_show_header = 1;
        rev.no_walk = 1;
+       rev.diffopt.stat_width = -1;    /* Scale to real terminal size */
+
        memset(&opt, 0, sizeof(opt));
        opt.def = "HEAD";
        opt.tweak = show_rev_tweak_rev;

diff --git a/builtin/merge.c b/builtin/merge.c
index d3e1e8dc9e478aaea7ef4da855fb7c2e10397644..cb8f14910b93edb7f1bfa6a4ee82f6a3d9fd7e40 100644 (file)
--- a/builtin/merge.c
+++ b/builtin/merge.c
@@ -399,6 +399,8 @@ static void finish(struct commit *head_commit,
        if (new_head && show_diffstat) {
                struct diff_options opts;
                diff_setup(&opts);
+               opts.stat_width = -1; /* use full terminal width */
+               opts.stat_graph_width = -1; /* respect statGraphWidth config */
                opts.output_format |=
                        DIFF_FORMAT_SUMMARY | DIFF_FORMAT_DIFFSTAT;
                opts.detect_rename = DIFF_DETECT_RENAME;

diff --git a/builtin/symbolic-ref.c b/builtin/symbolic-ref.c
index 2ef5962386dcc21af94c680be5fd75fc96d4962f..801d62ece5d2ec84d027089c29fc58e279126ebb 100644 (file)
--- a/builtin/symbolic-ref.c
+++ b/builtin/symbolic-ref.c
@@ -8,13 +8,15 @@ static const char * const git_symbolic_ref_usage[] = {
        NULL
 };
 
+static int shorten;
+
 static void check_symref(const char *HEAD, int quiet)
 {
        unsigned char sha1[20];
        int flag;
-       const char *refs_heads_master = resolve_ref_unsafe(HEAD, sha1, 0, &flag);
+       const char *refname = resolve_ref_unsafe(HEAD, sha1, 0, &flag);
 
-       if (!refs_heads_master)
+       if (!refname)
                die("No such ref: %s", HEAD);
        else if (!(flag & REF_ISSYMREF)) {
                if (!quiet)
@@ -22,7 +24,9 @@ static void check_symref(const char *HEAD, int quiet)
                else
                        exit(1);
        }
-       puts(refs_heads_master);
+       if (shorten)
+               refname = shorten_unambiguous_ref(refname, 0);
+       puts(refname);
 }
 
 int cmd_symbolic_ref(int argc, const char **argv, const char *prefix)
@@ -32,6 +36,7 @@ int cmd_symbolic_ref(int argc, const char **argv, const char *prefix)
        struct option options[] = {
                OPT__QUIET(&quiet,
                        "suppress error message for non-symbolic (detached) refs"),
+               OPT_BOOL(0, "short", &shorten, "shorten ref output"),
                OPT_STRING('m', NULL, &msg, "reason", "reason of the update"),
                OPT_END(),
        };

diff --git a/bundle.c b/bundle.c
index 7a760db2fc4ab2a807bead051edbf53182c8326a..d9cfd90534b6b6b0659576d5a71d1fa216bfa6b5 100644 (file)
--- a/bundle.c
+++ b/bundle.c
@@ -273,7 +273,7 @@ int create_bundle(struct bundle_header *header, const char *path,
                        if (!get_sha1_hex(buf.buf + 1, sha1)) {
                                struct object *object = parse_object(sha1);
                                object->flags |= UNINTERESTING;
-                               add_pending_object(&revs, object, buf.buf);
+                               add_pending_object(&revs, object, xstrdup(buf.buf));
                        }
                } else if (!get_sha1_hex(buf.buf, sha1)) {
                        struct object *object = parse_object(sha1);

diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 33f0e4dd696c73ffca2b9d2c3955661f1cdd00cd..fba076dde27440eaa90fd4fcfdfa55764410dd11 100755 (executable)
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -2092,6 +2092,7 @@ _git_config ()
                core.whitespace
                core.worktree
                diff.autorefreshindex
+               diff.statGraphWidth
                diff.external
                diff.ignoreSubmodules
                diff.mnemonicprefix

diff --git a/diff.c b/diff.c
index a1c06b554b80e433dcb735c8e0adf186b6252ae5..f47bffa2a3641cbf69b2e6d3f0f6c93b05f2c716 100644 (file)
--- a/diff.c
+++ b/diff.c
@@ -31,6 +31,7 @@ static const char *external_diff_cmd_cfg;
 int diff_auto_refresh_index = 1;
 static int diff_mnemonic_prefix;
 static int diff_no_prefix;
+static int diff_stat_graph_width;
 static int diff_dirstat_permille_default = 30;
 static struct diff_options default_diff_options;
 
@@ -156,6 +157,10 @@ int git_diff_ui_config(const char *var, const char *value, void *cb)
                diff_no_prefix = git_config_bool(var, value);
                return 0;
        }
+       if (!strcmp(var, "diff.statgraphwidth")) {
+               diff_stat_graph_width = git_config_int(var, value);
+               return 0;
+       }
        if (!strcmp(var, "diff.external"))
                return git_config_string(&external_diff_cmd_cfg, var, value);
        if (!strcmp(var, "diff.wordregex"))
@@ -1375,7 +1380,7 @@ static void show_stats(struct diffstat_t *data, struct diff_options *options)
        int i, len, add, del, adds = 0, dels = 0;
        uintmax_t max_change = 0, max_len = 0;
        int total_files = data->nr;
-       int width, name_width, count;
+       int width, name_width, graph_width, number_width = 4, count;
        const char *reset, *add_c, *del_c;
        const char *line_prefix = "";
        int extra_shown = 0;
@@ -1389,25 +1394,15 @@ static void show_stats(struct diffstat_t *data, struct diff_options *options)
                line_prefix = msg->buf;
        }
 
-       width = options->stat_width ? options->stat_width : 80;
-       name_width = options->stat_name_width ? options->stat_name_width : 50;
        count = options->stat_count ? options->stat_count : data->nr;
 
-       /* Sanity: give at least 5 columns to the graph,
-        * but leave at least 10 columns for the name.
-        */
-       if (width < 25)
-               width = 25;
-       if (name_width < 10)
-               name_width = 10;
-       else if (width < name_width + 15)
-               name_width = width - 15;
-
-       /* Find the longest filename and max number of changes */
        reset = diff_get_color_opt(options, DIFF_RESET);
        add_c = diff_get_color_opt(options, DIFF_FILE_NEW);
        del_c = diff_get_color_opt(options, DIFF_FILE_OLD);
 
+       /*
+        * Find the longest filename and max number of changes
+        */
        for (i = 0; (i < count) && (i < data->nr); i++) {
                struct diffstat_file *file = data->files[i];
                uintmax_t change = file->added + file->deleted;
@@ -1428,19 +1423,72 @@ static void show_stats(struct diffstat_t *data, struct diff_options *options)
        }
        count = i; /* min(count, data->nr) */
 
-       /* Compute the width of the graph part;
-        * 10 is for one blank at the beginning of the line plus
-        * " | count " between the name and the graph.
+       /*
+        * We have width = stat_width or term_columns() columns total.
+        * We want a maximum of min(max_len, stat_name_width) for the name part.
+        * We want a maximum of min(max_change, stat_graph_width) for the +- part.
+        * We also need 1 for " " and 4 + decimal_width(max_change)
+        * for " | NNNN " and one the empty column at the end, altogether
+        * 6 + decimal_width(max_change).
+        *
+        * If there's not enough space, we will use the smaller of
+        * stat_name_width (if set) and 5/8*width for the filename,
+        * and the rest for constant elements + graph part, but no more
+        * than stat_graph_width for the graph part.
+        * (5/8 gives 50 for filename and 30 for the constant parts + graph
+        * for the standard terminal size).
         *
-        * From here on, name_width is the width of the name area,
-        * and width is the width of the graph area.
+        * In other words: stat_width limits the maximum width, and
+        * stat_name_width fixes the maximum width of the filename,
+        * and is also used to divide available columns if there
+        * aren't enough.
         */
-       name_width = (name_width < max_len) ? name_width : max_len;
-       if (width < (name_width + 10) + max_change)
-               width = width - (name_width + 10);
+
+       if (options->stat_width == -1)
+               width = term_columns();
        else
-               width = max_change;
+               width = options->stat_width ? options->stat_width : 80;
+
+       if (options->stat_graph_width == -1)
+               options->stat_graph_width = diff_stat_graph_width;
 
+       /*
+        * Guarantee 3/8*16==6 for the graph part
+        * and 5/8*16==10 for the filename part
+        */
+       if (width < 16 + 6 + number_width)
+               width = 16 + 6 + number_width;
+
+       /*
+        * First assign sizes that are wanted, ignoring available width.
+        */
+       graph_width = (options->stat_graph_width &&
+                      options->stat_graph_width < max_change) ?
+               options->stat_graph_width : max_change;
+       name_width = (options->stat_name_width > 0 &&
+                     options->stat_name_width < max_len) ?
+               options->stat_name_width : max_len;
+
+       /*
+        * Adjust adjustable widths not to exceed maximum width
+        */
+       if (name_width + number_width + 6 + graph_width > width) {
+               if (graph_width > width * 3/8 - number_width - 6)
+                       graph_width = width * 3/8 - number_width - 6;
+               if (options->stat_graph_width &&
+                   graph_width > options->stat_graph_width)
+                       graph_width = options->stat_graph_width;
+               if (name_width > width - number_width - 6 - graph_width)
+                       name_width = width - number_width - 6 - graph_width;
+               else
+                       graph_width = width - number_width - 6 - name_width;
+       }
+
+       /*
+        * From here name_width is the width of the name area,
+        * and graph_width is the width of the graph area.
+        * max_change is used to scale graph properly.
+        */
        for (i = 0; i < count; i++) {
                const char *prefix = "";
                char *name = data->files[i]->print_name;
@@ -1496,18 +1544,18 @@ static void show_stats(struct diffstat_t *data, struct diff_options *options)
                adds += add;
                dels += del;
 
-               if (width <= max_change) {
+               if (graph_width <= max_change) {
                        int total = add + del;
 
-                       total = scale_linear(add + del, width, max_change);
+                       total = scale_linear(add + del, graph_width, max_change);
                        if (total < 2 && add && del)
                                /* width >= 2 due to the sanity check */
                                total = 2;
                        if (add < del) {
-                               add = scale_linear(add, width, max_change);
+                               add = scale_linear(add, graph_width, max_change);
                                del = total - add;
                        } else {
-                               del = scale_linear(del, width, max_change);
+                               del = scale_linear(del, graph_width, max_change);
                                add = total - del;
                        }
                }
@@ -3299,6 +3347,7 @@ static int stat_opt(struct diff_options *options, const char **av)
        char *end;
        int width = options->stat_width;
        int name_width = options->stat_name_width;
+       int graph_width = options->stat_graph_width;
        int count = options->stat_count;
        int argcount = 1;
 
@@ -3327,6 +3376,16 @@ static int stat_opt(struct diff_options *options, const char **av)
                                name_width = strtoul(av[1], &end, 10);
                                argcount = 2;
                        }
+               } else if (!prefixcmp(arg, "-graph-width")) {
+                       arg += strlen("-graph-width");
+                       if (*arg == '=')
+                               graph_width = strtoul(arg + 1, &end, 10);
+                       else if (!*arg && !av[1])
+                               die("Option '--stat-graph-width' requires a value");
+                       else if (!*arg) {
+                               graph_width = strtoul(av[1], &end, 10);
+                               argcount = 2;
+                       }
                } else if (!prefixcmp(arg, "-count")) {
                        arg += strlen("-count");
                        if (*arg == '=')
@@ -3352,6 +3411,7 @@ static int stat_opt(struct diff_options *options, const char **av)
                return 0;
        options->output_format |= DIFF_FORMAT_DIFFSTAT;
        options->stat_name_width = name_width;
+       options->stat_graph_width = graph_width;
        options->stat_width = width;
        options->stat_count = count;
        return argcount;

diff --git a/diff.h b/diff.h
index 7af5f1e2a7af3fde64ac945f8b2a9ed88829895a..e6a782c220865d764eb26cfbce471cad88b910ba 100644 (file)
--- a/diff.h
+++ b/diff.h
@@ -129,6 +129,7 @@ struct diff_options {
 
        int stat_width;
        int stat_name_width;
+       int stat_graph_width;
        int stat_count;
        const char *word_regex;
        enum diff_words_type word_diff;

diff --git a/fast-import.c b/fast-import.c
index 6cd19e580ba710d03682fcaff997fa7e0e555691..c1486cabbaa5f736f92994587fafd1f3afdf43af 100644 (file)
--- a/fast-import.c
+++ b/fast-import.c
@@ -2712,7 +2712,7 @@ static void parse_new_tag(void)
        /* Obtain the new tag name from the rest of our command */
        sp = strchr(command_buf.buf, ' ') + 1;
        t = pool_alloc(sizeof(struct tag));
-       t->next_tag = NULL;
+       memset(t, 0, sizeof(struct tag));
        t->name = pool_strdup(sp);
        if (last_tag)
                last_tag->next_tag = t;

diff --git a/git-am.sh b/git-am.sh
index 906f91f1884a2df1b55dd00a229899ec6a47bb6e..0bd290b4ae990df4e0553700fa4fa38696e2b980 100755 (executable)
--- a/git-am.sh
+++ b/git-am.sh
@@ -128,15 +128,18 @@ fall_back_3way () {
     mkdir "$dotest/patch-merge-tmp-dir"
 
     # First see if the patch records the index info that we can use.
-    git apply --build-fake-ancestor "$dotest/patch-merge-tmp-index" \
-       "$dotest/patch" &&
+    cmd="git apply $git_apply_opt --build-fake-ancestor" &&
+    cmd="$cmd "'"$dotest/patch-merge-tmp-index" "$dotest/patch"' &&
+    eval "$cmd" &&
     GIT_INDEX_FILE="$dotest/patch-merge-tmp-index" \
     git write-tree >"$dotest/patch-merge-base+" ||
     cannot_fallback "$(gettext "Repository lacks necessary blobs to fall back on 3-way merge.")"
 
     say Using index info to reconstruct a base tree...
-    if GIT_INDEX_FILE="$dotest/patch-merge-tmp-index" \
-       git apply --cached <"$dotest/patch"
+
+    cmd='GIT_INDEX_FILE="$dotest/patch-merge-tmp-index"'
+    cmd="$cmd git apply --cached $git_apply_opt"' <"$dotest/patch"'
+    if eval "$cmd"
     then
        mv "$dotest/patch-merge-base+" "$dotest/patch-merge-base"
        mv "$dotest/patch-merge-tmp-index" "$dotest/patch-merge-index"

diff --git a/gitweb/gitweb.perl b/gitweb/gitweb.perl
index 7729ed26b5f2b692abb293bc684a854cf1377921..cd98888a9325889ce1c8e06124c31ea5da2eea87 100755 (executable)
--- a/gitweb/gitweb.perl
+++ b/gitweb/gitweb.perl
@@ -1724,6 +1724,88 @@ sub chop_and_escape_str {
        }
 }
 
+# Highlight selected fragments of string, using given CSS class,
+# and escape HTML.  It is assumed that fragments do not overlap.
+# Regions are passed as list of pairs (array references).
+#
+# Example: esc_html_hl_regions("foobar", "mark", [ 0, 3 ]) returns
+# '<span class="mark">foo</span>bar'
+sub esc_html_hl_regions {
+       my ($str, $css_class, @sel) = @_;
+       return esc_html($str) unless @sel;
+
+       my $out = '';
+       my $pos = 0;
+
+       for my $s (@sel) {
+               $out .= esc_html(substr($str, $pos, $s->[0] - $pos))
+                       if ($s->[0] - $pos > 0);
+               $out .= $cgi->span({-class => $css_class},
+                                  esc_html(substr($str, $s->[0], $s->[1] - $s->[0])));
+
+               $pos = $s->[1];
+       }
+       $out .= esc_html(substr($str, $pos))
+               if ($pos < length($str));
+
+       return $out;
+}
+
+# return positions of beginning and end of each match
+sub matchpos_list {
+       my ($str, $regexp) = @_;
+       return unless (defined $str && defined $regexp);
+
+       my @matches;
+       while ($str =~ /$regexp/g) {
+               push @matches, [$-[0], $+[0]];
+       }
+       return @matches;
+}
+
+# highlight match (if any), and escape HTML
+sub esc_html_match_hl {
+       my ($str, $regexp) = @_;
+       return esc_html($str) unless defined $regexp;
+
+       my @matches = matchpos_list($str, $regexp);
+       return esc_html($str) unless @matches;
+
+       return esc_html_hl_regions($str, 'match', @matches);
+}
+
+
+# highlight match (if any) of shortened string, and escape HTML
+sub esc_html_match_hl_chopped {
+       my ($str, $chopped, $regexp) = @_;
+       return esc_html_match_hl($str, $regexp) unless defined $chopped;
+
+       my @matches = matchpos_list($str, $regexp);
+       return esc_html($chopped) unless @matches;
+
+       # filter matches so that we mark chopped string
+       my $tail = "... "; # see chop_str
+       unless ($chopped =~ s/\Q$tail\E$//) {
+               $tail = '';
+       }
+       my $chop_len = length($chopped);
+       my $tail_len = length($tail);
+       my @filtered;
+
+       for my $m (@matches) {
+               if ($m->[0] > $chop_len) {
+                       push @filtered, [ $chop_len, $chop_len + $tail_len ] if ($tail_len > 0);
+                       last;
+               } elsif ($m->[1] > $chop_len) {
+                       push @filtered, [ $m->[0], $chop_len + $tail_len ];
+                       last;
+               }
+               push @filtered, $m;
+       }
+
+       return esc_html_hl_regions($chopped . $tail, 'match', @filtered);
+}
+
 ## ----------------------------------------------------------------------
 ## functions returning short strings
 
@@ -5174,7 +5256,7 @@ sub git_patchset_body {
 # . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 
 sub git_project_search_form {
-       my ($searchtext, $search_use_regexp);
+       my ($searchtext, $search_use_regexp) = @_;
 
        my $limit = '';
        if ($project_filter) {
@@ -5368,10 +5450,17 @@ sub git_project_list_rows {
                        print "</td>\n";
                }
                print "<td>" . $cgi->a({-href => href(project=>$pr->{'path'}, action=>"summary"),
-                                       -class => "list"}, esc_html($pr->{'path'})) . "</td>\n" .
+                                       -class => "list"},
+                                      esc_html_match_hl($pr->{'path'}, $search_regexp)) .
+                     "</td>\n" .
                      "<td>" . $cgi->a({-href => href(project=>$pr->{'path'}, action=>"summary"),
-                                       -class => "list", -title => $pr->{'descr_long'}},
-                                       esc_html($pr->{'descr'})) . "</td>\n" .
+                                       -class => "list",
+                                       -title => $pr->{'descr_long'}},
+                                       $search_regexp
+                                       ? esc_html_match_hl_chopped($pr->{'descr_long'},
+                                                                   $pr->{'descr'}, $search_regexp)
+                                       : esc_html($pr->{'descr'})) .
+                     "</td>\n" .
                      "<td><i>" . chop_and_escape_str($pr->{'owner'}, 15) . "</i></td>\n";
                print "<td class=\"". age_class($pr->{'age'}) . "\">" .
                      (defined $pr->{'age_string'} ? $pr->{'age_string'} : "No commits") . "</td>\n" .

diff --git a/http.c b/http.c
index 0ffd79cd81ba3e722dcdbf4c20469fa551ce9d80..8ac8eb6c38e21bdb347f59ec41162270ebe82c04 100644 (file)
--- a/http.c
+++ b/http.c
@@ -295,8 +295,10 @@ static CURL *get_curl_handle(void)
        if (curl_ftp_no_epsv)
                curl_easy_setopt(result, CURLOPT_FTP_USE_EPSV, 0);
 
-       if (curl_http_proxy)
+       if (curl_http_proxy) {
                curl_easy_setopt(result, CURLOPT_PROXY, curl_http_proxy);
+               curl_easy_setopt(result, CURLOPT_PROXYAUTH, CURLAUTH_ANY);
+       }
 
        return result;
 }

diff --git a/parse-options.c b/parse-options.c
index 190899611ef9f53a0bc5dc7b1a7f419350a301be..850cfa78c9b7bbcd1cb8504453f60fd15b8ceebb 100644 (file)
--- a/parse-options.c
+++ b/parse-options.c
@@ -393,6 +393,8 @@ int parse_options_step(struct parse_opt_ctx_t *ctx,
                        case -1:
                                return parse_options_usage(ctx, usagestr, options, 1);
                        case -2:
+                               if (ctx->opt)
+                                       check_typos(arg + 1, options);
                                goto unknown;
                        }
                        if (ctx->opt)

diff --git a/t/perf/p4000-diff-algorithms.sh b/t/perf/p4000-diff-algorithms.sh
new file mode 100755 (executable)
index 0000000..d6e505c
--- /dev/null
+++ b/t/perf/p4000-diff-algorithms.sh
@@ -0,0 +1,29 @@
+#!/bin/sh
+
+test_description="Tests diff generation performance"
+
+. ./perf-lib.sh
+
+test_perf_default_repo
+
+test_perf 'log -3000 (baseline)' '
+       git log -1000 >/dev/null
+'
+
+test_perf 'log --raw -3000 (tree-only)' '
+       git log --raw -3000 >/dev/null
+'
+
+test_perf 'log -p -3000 (Myers)' '
+       git log -p -3000 >/dev/null
+'
+
+test_perf 'log -p -3000 --histogram' '
+       git log -p -3000 --histogram >/dev/null
+'
+
+test_perf 'log -p -3000 --patience' '
+       git log -p -3000 --patience >/dev/null
+'
+
+test_done

diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh
index f4e8f43bae5d1929718578a2a589125beb5d30c8..ccb5435b2a7dd4724f3bc8e0b0186f248dbad448 100755 (executable)
--- a/t/t0000-basic.sh
+++ b/t/t0000-basic.sh
@@ -34,69 +34,69 @@ fi
 # git init has been done in an empty repository.
 # make sure it is empty.
 
-find .git/objects -type f -print >should-be-empty
-test_expect_success \
-    '.git/objects should be empty after git init in an empty repo.' \
-    'cmp -s /dev/null should-be-empty'
+test_expect_success '.git/objects should be empty after git init in an empty repo' '
+       find .git/objects -type f -print >should-be-empty &&
+       test_line_count = 0 should-be-empty
+'
 
 # also it should have 2 subdirectories; no fan-out anymore, pack, and info.
 # 3 is counting "objects" itself
-find .git/objects -type d -print >full-of-directories
-test_expect_success \
-    '.git/objects should have 3 subdirectories.' \
-    'test $(wc -l < full-of-directories) = 3'
+test_expect_success '.git/objects should have 3 subdirectories' '
+       find .git/objects -type d -print >full-of-directories &&
+       test_line_count = 3 full-of-directories
+'
 
 ################################################################
 # Test harness
 test_expect_success 'success is reported like this' '
-    :
+       :
 '
 test_expect_failure 'pretend we have a known breakage' '
-    false
+       false
 '
 
 test_expect_success 'pretend we have fixed a known breakage (run in sub test-lib)' "
-    mkdir passing-todo &&
-    (cd passing-todo &&
-    cat >passing-todo.sh <<EOF &&
-#!$SHELL_PATH
-
-test_description='A passing TODO test
-
-This is run in a sub test-lib so that we do not get incorrect passing
-metrics
-'
-
-# Point to the t/test-lib.sh, which isn't in ../ as usual
-TEST_DIRECTORY=\"$TEST_DIRECTORY\"
-. \"\$TEST_DIRECTORY\"/test-lib.sh
-
-test_expect_failure 'pretend we have fixed a known breakage' '
-    :
-'
-
-test_done
-EOF
-    chmod +x passing-todo.sh &&
-    ./passing-todo.sh >out 2>err &&
-    ! test -s err &&
-sed -e 's/^> //' >expect <<EOF &&
-> ok 1 - pretend we have fixed a known breakage # TODO known breakage
-> # fixed 1 known breakage(s)
-> # passed all 1 test(s)
-> 1..1
-EOF
-    test_cmp expect out)
+       mkdir passing-todo &&
+       (cd passing-todo &&
+       cat >passing-todo.sh <<-EOF &&
+       #!$SHELL_PATH
+
+       test_description='A passing TODO test
+
+       This is run in a sub test-lib so that we do not get incorrect
+       passing metrics
+       '
+
+       # Point to the t/test-lib.sh, which isn't in ../ as usual
+       TEST_DIRECTORY=\"$TEST_DIRECTORY\"
+       . \"\$TEST_DIRECTORY\"/test-lib.sh
+
+       test_expect_failure 'pretend we have fixed a known breakage' '
+               :
+       '
+
+       test_done
+       EOF
+       chmod +x passing-todo.sh &&
+       ./passing-todo.sh >out 2>err &&
+       ! test -s err &&
+       sed -e 's/^> //' >expect <<-\\EOF &&
+       > ok 1 - pretend we have fixed a known breakage # TODO known breakage
+       > # fixed 1 known breakage(s)
+       > # passed all 1 test(s)
+       > 1..1
+       EOF
+       test_cmp expect out)
 "
 test_set_prereq HAVEIT
 haveit=no
 test_expect_success HAVEIT 'test runs if prerequisite is satisfied' '
-    test_have_prereq HAVEIT &&
-    haveit=yes
+       test_have_prereq HAVEIT &&
+       haveit=yes
 '
 donthaveit=yes
 test_expect_success DONTHAVEIT 'unmet prerequisite causes test to be skipped' '
-    donthaveit=no
+       donthaveit=no
 '
 if test $haveit$donthaveit != yesyes
 then
@@ -107,17 +107,17 @@ fi
 test_set_prereq HAVETHIS
 haveit=no
 test_expect_success HAVETHIS,HAVEIT 'test runs if prerequisites are satisfied' '
-    test_have_prereq HAVEIT &&
-    test_have_prereq HAVETHIS &&
-    haveit=yes
+       test_have_prereq HAVEIT &&
+       test_have_prereq HAVETHIS &&
+       haveit=yes
 '
 donthaveit=yes
 test_expect_success HAVEIT,DONTHAVEIT 'unmet prerequisites causes test to be skipped' '
-    donthaveit=no
+       donthaveit=no
 '
 donthaveiteither=yes
 test_expect_success DONTHAVEIT,HAVEIT 'unmet prerequisites causes test to be skipped' '
-    donthaveiteither=no
+       donthaveiteither=no
 '
 if test $haveit$donthaveit$donthaveiteither != yesyesyes
 then
@@ -127,7 +127,7 @@ fi
 
 clean=no
 test_expect_success 'tests clean up after themselves' '
-    test_when_finished clean=yes
+       test_when_finished clean=yes
 '
 
 if test $clean != yes
@@ -137,106 +137,100 @@ then
 fi
 
 test_expect_success 'tests clean up even on failures' "
-    mkdir failing-cleanup &&
-    (cd failing-cleanup &&
-    cat >failing-cleanup.sh <<EOF &&
-#!$SHELL_PATH
-
-test_description='Failing tests with cleanup commands'
-
-# Point to the t/test-lib.sh, which isn't in ../ as usual
-TEST_DIRECTORY=\"$TEST_DIRECTORY\"
-. \"\$TEST_DIRECTORY\"/test-lib.sh
-
-test_expect_success 'tests clean up even after a failure' '
-    touch clean-after-failure &&
-    test_when_finished rm clean-after-failure &&
-    (exit 1)
-'
-
-test_expect_success 'failure to clean up causes the test to fail' '
-    test_when_finished \"(exit 2)\"
-'
-
-test_done
-EOF
-    chmod +x failing-cleanup.sh &&
-    test_must_fail ./failing-cleanup.sh >out 2>err &&
-    ! test -s err &&
-    ! test -f \"trash directory.failing-cleanup/clean-after-failure\" &&
-sed -e 's/Z$//' -e 's/^> //' >expect <<\EOF &&
-> not ok - 1 tests clean up even after a failure
-> #    Z
-> #        touch clean-after-failure &&
-> #        test_when_finished rm clean-after-failure &&
-> #        (exit 1)
-> #    Z
-> not ok - 2 failure to clean up causes the test to fail
-> #    Z
-> #        test_when_finished \"(exit 2)\"
-> #    Z
-> # failed 2 among 2 test(s)
-> 1..2
-EOF
-    test_cmp expect out)
+       mkdir failing-cleanup &&
+       (
+       cd failing-cleanup &&
+
+       cat >failing-cleanup.sh <<-EOF &&
+       #!$SHELL_PATH
+
+       test_description='Failing tests with cleanup commands'
+
+       # Point to the t/test-lib.sh, which isn't in ../ as usual
+       TEST_DIRECTORY=\"$TEST_DIRECTORY\"
+       . \"\$TEST_DIRECTORY\"/test-lib.sh
+
+       test_expect_success 'tests clean up even after a failure' '
+               touch clean-after-failure &&
+               test_when_finished rm clean-after-failure &&
+               (exit 1)
+       '
+       test_expect_success 'failure to clean up causes the test to fail' '
+               test_when_finished \"(exit 2)\"
+       '
+       test_done
+
+       EOF
+
+       chmod +x failing-cleanup.sh &&
+       test_must_fail ./failing-cleanup.sh >out 2>err &&
+       ! test -s err &&
+       ! test -f \"trash directory.failing-cleanup/clean-after-failure\" &&
+       sed -e 's/Z$//' -e 's/^> //' >expect <<-\\EOF &&
+       > not ok - 1 tests clean up even after a failure
+       > #     Z
+       > #     touch clean-after-failure &&
+       > #     test_when_finished rm clean-after-failure &&
+       > #     (exit 1)
+       > #     Z
+       > not ok - 2 failure to clean up causes the test to fail
+       > #     Z
+       > #     test_when_finished \"(exit 2)\"
+       > #     Z
+       > # failed 2 among 2 test(s)
+       > 1..2
+       EOF
+       test_cmp expect out
+       )
 "
 
 ################################################################
 # Basics of the basics
 
 # updating a new file without --add should fail.
-test_expect_success 'git update-index without --add should fail adding.' '
-    test_must_fail git update-index should-be-empty
+test_expect_success 'git update-index without --add should fail adding' '
+       test_must_fail git update-index should-be-empty
 '
 
 # and with --add it should succeed, even if it is empty (it used to fail).
-test_expect_success \
-    'git update-index with --add should succeed.' \
-    'git update-index --add should-be-empty'
+test_expect_success 'git update-index with --add should succeed' '
+       git update-index --add should-be-empty
+'
 
-test_expect_success \
-    'writing tree out with git write-tree' \
-    'tree=$(git write-tree)'
+test_expect_success 'writing tree out with git write-tree' '
+       tree=$(git write-tree)
+'
 
 # we know the shape and contents of the tree and know the object ID for it.
-test_expect_success \
-    'validate object ID of a known tree.' \
-    'test "$tree" = 7bb943559a305bdd6bdee2cef6e5df2413c3d30a'
+test_expect_success 'validate object ID of a known tree' '
+       test "$tree" = 7bb943559a305bdd6bdee2cef6e5df2413c3d30a
+    '
 
 # Removing paths.
-rm -f should-be-empty full-of-directories
-test_expect_success 'git update-index without --remove should fail removing.' '
-    test_must_fail git update-index should-be-empty
+test_expect_success 'git update-index without --remove should fail removing' '
+       rm -f should-be-empty full-of-directories &&
+       test_must_fail git update-index should-be-empty
 '
 
-test_expect_success \
-    'git update-index with --remove should be able to remove.' \
-    'git update-index --remove should-be-empty'
+test_expect_success 'git update-index with --remove should be able to remove' '
+       git update-index --remove should-be-empty
+'
 
 # Empty tree can be written with recent write-tree.
-test_expect_success \
-    'git write-tree should be able to write an empty tree.' \
-    'tree=$(git write-tree)'
+test_expect_success 'git write-tree should be able to write an empty tree' '
+       tree=$(git write-tree)
+'
 
-test_expect_success \
-    'validate object ID of a known tree.' \
-    'test "$tree" = 4b825dc642cb6eb9a060e54bf8d69288fbee4904'
+test_expect_success 'validate object ID of a known tree' '
+       test "$tree" = 4b825dc642cb6eb9a060e54bf8d69288fbee4904
+'
 
 # Various types of objects
+
 # Some filesystems do not support symblic links; on such systems
 # some expected values are different
-mkdir path2 path3 path3/subp3
-paths='path0 path2/file2 path3/file3 path3/subp3/file3'
-for p in $paths
-do
-    echo "hello $p" >$p
-done
 if test_have_prereq SYMLINKS
 then
-       for p in $paths
-       do
-               ln -s "hello $p" ${p}sym
-       done
        expectfilter=cat
        expectedtree=087704a96baf1c2d1c869a8b084481e121c88b5b
        expectedptree1=21ae8269cacbe57ae09138dcc3a2887f904d02b3
@@ -248,135 +242,154 @@ else
        expectedptree2=ce580448f0148b985a513b693fdf7d802cacb44f
 fi
 
-test_expect_success \
-    'adding various types of objects with git update-index --add.' \
-    'find path* ! -type d -print | xargs git update-index --add'
+
+test_expect_success 'adding various types of objects with git update-index --add' '
+       mkdir path2 path3 path3/subp3 &&
+       paths="path0 path2/file2 path3/file3 path3/subp3/file3" &&
+       (
+               for p in $paths
+               do
+                       echo "hello $p" >$p || exit 1
+                       if test_have_prereq SYMLINKS
+                       then
+                               ln -s "hello $p" ${p}sym || exit 1
+                       fi
+               done
+       ) &&
+       find path* ! -type d -print | xargs git update-index --add
+'
 
 # Show them and see that matches what we expect.
-test_expect_success \
-    'showing stage with git ls-files --stage' \
-    'git ls-files --stage >current'
-
-$expectfilter >expected <<\EOF
-100644 f87290f8eb2cbbea7857214459a0739927eab154 0      path0
-120000 15a98433ae33114b085f3eb3bb03b832b3180a01 0      path0sym
-100644 3feff949ed00a62d9f7af97c15cd8a30595e7ac7 0      path2/file2
-120000 d8ce161addc5173867a3c3c730924388daedbc38 0      path2/file2sym
-100644 0aa34cae68d0878578ad119c86ca2b5ed5b28376 0      path3/file3
-120000 8599103969b43aff7e430efea79ca4636466794f 0      path3/file3sym
-100644 00fb5908cb97c2564a9783c0c64087333b3b464f 0      path3/subp3/file3
-120000 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c 0      path3/subp3/file3sym
-EOF
-test_expect_success \
-    'validate git ls-files output for a known tree.' \
-    'test_cmp expected current'
-
-test_expect_success \
-    'writing tree out with git write-tree.' \
-    'tree=$(git write-tree)'
-test_expect_success \
-    'validate object ID for a known tree.' \
-    'test "$tree" = "$expectedtree"'
-
-test_expect_success \
-    'showing tree with git ls-tree' \
-    'git ls-tree $tree >current'
-cat >expected <<\EOF
-100644 blob f87290f8eb2cbbea7857214459a0739927eab154   path0
-120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01   path0sym
-040000 tree 58a09c23e2ca152193f2786e06986b7b6712bdbe   path2
-040000 tree 21ae8269cacbe57ae09138dcc3a2887f904d02b3   path3
-EOF
-test_expect_success SYMLINKS \
-    'git ls-tree output for a known tree.' \
-    'test_cmp expected current'
+test_expect_success 'showing stage with git ls-files --stage' '
+       git ls-files --stage >current
+'
+
+test_expect_success 'validate git ls-files output for a known tree' '
+       $expectfilter >expected <<-\EOF &&
+       100644 f87290f8eb2cbbea7857214459a0739927eab154 0       path0
+       120000 15a98433ae33114b085f3eb3bb03b832b3180a01 0       path0sym
+       100644 3feff949ed00a62d9f7af97c15cd8a30595e7ac7 0       path2/file2
+       120000 d8ce161addc5173867a3c3c730924388daedbc38 0       path2/file2sym
+       100644 0aa34cae68d0878578ad119c86ca2b5ed5b28376 0       path3/file3
+       120000 8599103969b43aff7e430efea79ca4636466794f 0       path3/file3sym
+       100644 00fb5908cb97c2564a9783c0c64087333b3b464f 0       path3/subp3/file3
+       120000 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c 0       path3/subp3/file3sym
+       EOF
+       test_cmp expected current
+'
+
+test_expect_success 'writing tree out with git write-tree' '
+       tree=$(git write-tree)
+'
+
+test_expect_success 'validate object ID for a known tree' '
+       test "$tree" = "$expectedtree"
+'
+
+test_expect_success 'showing tree with git ls-tree' '
+    git ls-tree $tree >current
+'
+
+test_expect_success SYMLINKS 'git ls-tree output for a known tree' '
+       cat >expected <<-\EOF &&
+       100644 blob f87290f8eb2cbbea7857214459a0739927eab154    path0
+       120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01    path0sym
+       040000 tree 58a09c23e2ca152193f2786e06986b7b6712bdbe    path2
+       040000 tree 21ae8269cacbe57ae09138dcc3a2887f904d02b3    path3
+       EOF
+       test_cmp expected current
+'
 
 # This changed in ls-tree pathspec change -- recursive does
 # not show tree nodes anymore.
-test_expect_success \
-    'showing tree with git ls-tree -r' \
-    'git ls-tree -r $tree >current'
-$expectfilter >expected <<\EOF
-100644 blob f87290f8eb2cbbea7857214459a0739927eab154   path0
-120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01   path0sym
-100644 blob 3feff949ed00a62d9f7af97c15cd8a30595e7ac7   path2/file2
-120000 blob d8ce161addc5173867a3c3c730924388daedbc38   path2/file2sym
-100644 blob 0aa34cae68d0878578ad119c86ca2b5ed5b28376   path3/file3
-120000 blob 8599103969b43aff7e430efea79ca4636466794f   path3/file3sym
-100644 blob 00fb5908cb97c2564a9783c0c64087333b3b464f   path3/subp3/file3
-120000 blob 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c   path3/subp3/file3sym
-EOF
-test_expect_success \
-    'git ls-tree -r output for a known tree.' \
-    'test_cmp expected current'
+test_expect_success 'showing tree with git ls-tree -r' '
+       git ls-tree -r $tree >current
+'
+
+test_expect_success 'git ls-tree -r output for a known tree' '
+       $expectfilter >expected <<-\EOF &&
+       100644 blob f87290f8eb2cbbea7857214459a0739927eab154    path0
+       120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01    path0sym
+       100644 blob 3feff949ed00a62d9f7af97c15cd8a30595e7ac7    path2/file2
+       120000 blob d8ce161addc5173867a3c3c730924388daedbc38    path2/file2sym
+       100644 blob 0aa34cae68d0878578ad119c86ca2b5ed5b28376    path3/file3
+       120000 blob 8599103969b43aff7e430efea79ca4636466794f    path3/file3sym
+       100644 blob 00fb5908cb97c2564a9783c0c64087333b3b464f    path3/subp3/file3
+       120000 blob 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c    path3/subp3/file3sym
+       EOF
+       test_cmp expected current
+'
 
 # But with -r -t we can have both.
-test_expect_success \
-    'showing tree with git ls-tree -r -t' \
-    'git ls-tree -r -t $tree >current'
-cat >expected <<\EOF
-100644 blob f87290f8eb2cbbea7857214459a0739927eab154   path0
-120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01   path0sym
-040000 tree 58a09c23e2ca152193f2786e06986b7b6712bdbe   path2
-100644 blob 3feff949ed00a62d9f7af97c15cd8a30595e7ac7   path2/file2
-120000 blob d8ce161addc5173867a3c3c730924388daedbc38   path2/file2sym
-040000 tree 21ae8269cacbe57ae09138dcc3a2887f904d02b3   path3
-100644 blob 0aa34cae68d0878578ad119c86ca2b5ed5b28376   path3/file3
-120000 blob 8599103969b43aff7e430efea79ca4636466794f   path3/file3sym
-040000 tree 3c5e5399f3a333eddecce7a9b9465b63f65f51e2   path3/subp3
-100644 blob 00fb5908cb97c2564a9783c0c64087333b3b464f   path3/subp3/file3
-120000 blob 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c   path3/subp3/file3sym
-EOF
-test_expect_success SYMLINKS \
-    'git ls-tree -r output for a known tree.' \
-    'test_cmp expected current'
-
-test_expect_success \
-    'writing partial tree out with git write-tree --prefix.' \
-    'ptree=$(git write-tree --prefix=path3)'
-test_expect_success \
-    'validate object ID for a known tree.' \
-    'test "$ptree" = "$expectedptree1"'
-
-test_expect_success \
-    'writing partial tree out with git write-tree --prefix.' \
-    'ptree=$(git write-tree --prefix=path3/subp3)'
-test_expect_success \
-    'validate object ID for a known tree.' \
-    'test "$ptree" = "$expectedptree2"'
-
-cat >badobjects <<EOF
-100644 blob 1000000000000000000000000000000000000000   dir/file1
-100644 blob 2000000000000000000000000000000000000000   dir/file2
-100644 blob 3000000000000000000000000000000000000000   dir/file3
-100644 blob 4000000000000000000000000000000000000000   dir/file4
-100644 blob 5000000000000000000000000000000000000000   dir/file5
-EOF
+test_expect_success 'showing tree with git ls-tree -r -t' '
+       git ls-tree -r -t $tree >current
+'
 
-rm .git/index
-test_expect_success \
-    'put invalid objects into the index.' \
-    'git update-index --index-info < badobjects'
+test_expect_success SYMLINKS 'git ls-tree -r output for a known tree' '
+       cat >expected <<-\EOF &&
+       100644 blob f87290f8eb2cbbea7857214459a0739927eab154    path0
+       120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01    path0sym
+       040000 tree 58a09c23e2ca152193f2786e06986b7b6712bdbe    path2
+       100644 blob 3feff949ed00a62d9f7af97c15cd8a30595e7ac7    path2/file2
+       120000 blob d8ce161addc5173867a3c3c730924388daedbc38    path2/file2sym
+       040000 tree 21ae8269cacbe57ae09138dcc3a2887f904d02b3    path3
+       100644 blob 0aa34cae68d0878578ad119c86ca2b5ed5b28376    path3/file3
+       120000 blob 8599103969b43aff7e430efea79ca4636466794f    path3/file3sym
+       040000 tree 3c5e5399f3a333eddecce7a9b9465b63f65f51e2    path3/subp3
+       100644 blob 00fb5908cb97c2564a9783c0c64087333b3b464f    path3/subp3/file3
+       120000 blob 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c    path3/subp3/file3sym
+       EOF
+       test_cmp expected current
+'
 
-test_expect_success 'writing this tree without --missing-ok.' '
-    test_must_fail git write-tree
+test_expect_success 'writing partial tree out with git write-tree --prefix' '
+       ptree=$(git write-tree --prefix=path3)
 '
 
-test_expect_success \
-    'writing this tree with --missing-ok.' \
-    'git write-tree --missing-ok'
+test_expect_success 'validate object ID for a known tree' '
+       test "$ptree" = "$expectedptree1"
+'
+
+test_expect_success 'writing partial tree out with git write-tree --prefix' '
+       ptree=$(git write-tree --prefix=path3/subp3)
+'
+
+test_expect_success 'validate object ID for a known tree' '
+       test "$ptree" = "$expectedptree2"
+'
+
+test_expect_success 'put invalid objects into the index' '
+       rm -f .git/index &&
+       cat >badobjects <<-\EOF &&
+       100644 blob 1000000000000000000000000000000000000000    dir/file1
+       100644 blob 2000000000000000000000000000000000000000    dir/file2
+       100644 blob 3000000000000000000000000000000000000000    dir/file3
+       100644 blob 4000000000000000000000000000000000000000    dir/file4
+       100644 blob 5000000000000000000000000000000000000000    dir/file5
+       EOF
+       git update-index --index-info <badobjects
+'
+
+test_expect_success 'writing this tree without --missing-ok' '
+       test_must_fail git write-tree
+'
+
+test_expect_success 'writing this tree with --missing-ok' '
+       git write-tree --missing-ok
+'
 
 
 ################################################################
-rm .git/index
-test_expect_success \
-    'git read-tree followed by write-tree should be idempotent.' \
-    'git read-tree $tree &&
-     test -f .git/index &&
-     newtree=$(git write-tree) &&
-     test "$newtree" = "$tree"'
-
-$expectfilter >expected <<\EOF
+test_expect_success 'git read-tree followed by write-tree should be idempotent' '
+       rm -f .git/index
+       git read-tree $tree &&
+       test -f .git/index &&
+       newtree=$(git write-tree) &&
+       test "$newtree" = "$tree"
+'
+
+test_expect_success 'validate git diff-files output for a know cache/work tree state' '
+       $expectfilter >expected <<\EOF &&
 :100644 100644 f87290f8eb2cbbea7857214459a0739927eab154 0000000000000000000000000000000000000000 M     path0
 :120000 120000 15a98433ae33114b085f3eb3bb03b832b3180a01 0000000000000000000000000000000000000000 M     path0sym
 :100644 100644 3feff949ed00a62d9f7af97c15cd8a30595e7ac7 0000000000000000000000000000000000000000 M     path2/file2
@@ -386,45 +399,47 @@ $expectfilter >expected <<\EOF
 :100644 100644 00fb5908cb97c2564a9783c0c64087333b3b464f 0000000000000000000000000000000000000000 M     path3/subp3/file3
 :120000 120000 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c 0000000000000000000000000000000000000000 M     path3/subp3/file3sym
 EOF
-test_expect_success \
-    'validate git diff-files output for a know cache/work tree state.' \
-    'git diff-files >current && test_cmp current expected >/dev/null'
+       git diff-files >current &&
+       test_cmp current expected
+'
 
-test_expect_success \
-    'git update-index --refresh should succeed.' \
-    'git update-index --refresh'
+test_expect_success 'git update-index --refresh should succeed' '
+       git update-index --refresh
+'
 
-test_expect_success \
-    'no diff after checkout and git update-index --refresh.' \
-    'git diff-files >current && cmp -s current /dev/null'
+test_expect_success 'no diff after checkout and git update-index --refresh' '
+       git diff-files >current &&
+       cmp -s current /dev/null
+'
 
 ################################################################
 P=$expectedtree
-test_expect_success \
-    'git commit-tree records the correct tree in a commit.' \
-    'commit0=$(echo NO | git commit-tree $P) &&
-     tree=$(git show --pretty=raw $commit0 |
-        sed -n -e "s/^tree //p" -e "/^author /q") &&
-     test "z$tree" = "z$P"'
-
-test_expect_success \
-    'git commit-tree records the correct parent in a commit.' \
-    'commit1=$(echo NO | git commit-tree $P -p $commit0) &&
-     parent=$(git show --pretty=raw $commit1 |
-        sed -n -e "s/^parent //p" -e "/^author /q") &&
-     test "z$commit0" = "z$parent"'
-
-test_expect_success \
-    'git commit-tree omits duplicated parent in a commit.' \
-    'commit2=$(echo NO | git commit-tree $P -p $commit0 -p $commit0) &&
-     parent=$(git show --pretty=raw $commit2 |
-        sed -n -e "s/^parent //p" -e "/^author /q" |
-        sort -u) &&
-     test "z$commit0" = "z$parent" &&
-     numparent=$(git show --pretty=raw $commit2 |
-        sed -n -e "s/^parent //p" -e "/^author /q" |
-        wc -l) &&
-     test $numparent = 1'
+
+test_expect_success 'git commit-tree records the correct tree in a commit' '
+       commit0=$(echo NO | git commit-tree $P) &&
+       tree=$(git show --pretty=raw $commit0 |
+                sed -n -e "s/^tree //p" -e "/^author /q") &&
+       test "z$tree" = "z$P"
+'
+
+test_expect_success 'git commit-tree records the correct parent in a commit' '
+       commit1=$(echo NO | git commit-tree $P -p $commit0) &&
+       parent=$(git show --pretty=raw $commit1 |
+               sed -n -e "s/^parent //p" -e "/^author /q") &&
+       test "z$commit0" = "z$parent"
+'
+
+test_expect_success 'git commit-tree omits duplicated parent in a commit' '
+       commit2=$(echo NO | git commit-tree $P -p $commit0 -p $commit0) &&
+            parent=$(git show --pretty=raw $commit2 |
+               sed -n -e "s/^parent //p" -e "/^author /q" |
+               sort -u) &&
+       test "z$commit0" = "z$parent" &&
+       numparent=$(git show --pretty=raw $commit2 |
+               sed -n -e "s/^parent //p" -e "/^author /q" |
+               wc -l) &&
+       test $numparent = 1
+'
 
 test_expect_success 'update-index D/F conflict' '
        mv path0 tmp &&

diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh
index a44bcb9b3983fa2ba3bc9182702e309577bfc441..e3f354a45e382dbaa9de4557aa9310fa21eb626b 100755 (executable)
--- a/t/t0040-parse-options.sh
+++ b/t/t0040-parse-options.sh
@@ -236,6 +236,16 @@ test_expect_success 'detect possible typos' '
        test_cmp typo.err output.err
 '
 
+cat > typo.err << EOF
+error: did you mean \`--ambiguous\` (with two dashes ?)
+EOF
+
+test_expect_success 'detect possible typos' '
+       test_must_fail test-parse-options -ambiguous > output 2> output.err &&
+       test ! -s output &&
+       test_cmp typo.err output.err
+'
+
 cat > expect <<EOF
 boolean: 0
 integer: 0

diff --git a/t/t0300-credentials.sh b/t/t0300-credentials.sh
index 8621ab036f91d0b7dcf96a1964611b8cafc3adbd..20e28e34e7dc63aaf9ee9c6bdabcf311e0240615 100755 (executable)
--- a/t/t0300-credentials.sh
+++ b/t/t0300-credentials.sh
@@ -8,10 +8,13 @@ test_expect_success 'setup helper scripts' '
        cat >dump <<-\EOF &&
        whoami=`echo $0 | sed s/.*git-credential-//`
        echo >&2 "$whoami: $*"
-       while IFS== read key value; do
+       OIFS=$IFS
+       IFS==
+       while read key value; do
                echo >&2 "$whoami: $key=$value"
                eval "$key=$value"
        done
+       IFS=$OIFS
        EOF
 
        write_script git-credential-useless <<-\EOF &&

diff --git a/t/t4052-stat-output.sh b/t/t4052-stat-output.sh
new file mode 100755 (executable)
index 0000000..328aa8f
--- /dev/null
+++ b/t/t4052-stat-output.sh
@@ -0,0 +1,220 @@
+#!/bin/sh
+#
+# Copyright (c) 2012 Zbigniew Jędrzejewski-Szmek
+#
+
+test_description='test --stat output of various commands'
+
+. ./test-lib.sh
+. "$TEST_DIRECTORY"/lib-terminal.sh
+
+# 120 character name
+name=aaaaaaaaaa
+name=$name$name$name$name$name$name$name$name$name$name$name$name
+test_expect_success 'preparation' '
+       >"$name" &&
+       git add "$name" &&
+       git commit -m message &&
+       echo a >"$name" &&
+       git commit -m message "$name"
+'
+
+while read cmd args
+do
+       cat >expect <<-'EOF'
+        ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa |    1 +
+       EOF
+       test_expect_success "$cmd: small change with long name gives more space to the name" '
+               git $cmd $args >output &&
+               grep " | " output >actual &&
+               test_cmp expect actual
+       '
+
+       cat >expect <<-'EOF'
+        ...aaaaaaaaaaaaaaaaaaaaaaaaaa |    1 +
+       EOF
+       test_expect_success "$cmd --stat=width: a long name is given more room when the bar is short" '
+               git $cmd $args --stat=40 >output &&
+               grep " | " output >actual &&
+               test_cmp expect actual
+       '
+
+       test_expect_success "$cmd --stat-width=width with long name" '
+               git $cmd $args --stat-width=40 >output &&
+               grep " | " output >actual &&
+               test_cmp expect actual
+       '
+
+       cat >expect <<-'EOF'
+        ...aaaaaaaaaaaaaaaaaaaaaaaaaaa |    1 +
+       EOF
+       test_expect_success "$cmd --stat=...,name-width with long name" '
+               git $cmd $args --stat=60,30 >output &&
+               grep " | " output >actual &&
+               test_cmp expect actual
+       '
+
+       test_expect_success "$cmd --stat-name-width with long name" '
+               git $cmd $args --stat-name-width=30 >output &&
+               grep " | " output >actual &&
+               test_cmp expect actual
+       '
+done <<\EOF
+format-patch -1 --stdout
+diff HEAD^ HEAD --stat
+show --stat
+log -1 --stat
+EOF
+
+
+test_expect_success 'preparation for big change tests' '
+       >abcd &&
+       git add abcd &&
+       git commit -m message &&
+       i=0 &&
+       while test $i -lt 1000
+       do
+               echo $i && i=$(($i + 1))
+       done >abcd &&
+       git commit -m message abcd
+'
+
+cat >expect80 <<'EOF'
+ abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+EOF
+
+cat >expect200 <<'EOF'
+ abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+EOF
+
+while read verb expect cmd args
+do
+       test_expect_success "$cmd $verb COLUMNS (big change)" '
+               COLUMNS=200 git $cmd $args >output
+               grep " | " output >actual &&
+               test_cmp "$expect" actual
+       '
+done <<\EOF
+ignores expect80 format-patch -1 --stdout
+respects expect200 diff HEAD^ HEAD --stat
+respects expect200 show --stat
+respects expect200 log -1 --stat
+EOF
+
+cat >expect40 <<'EOF'
+ abcd | 1000 ++++++++++++++++++++++++++
+EOF
+
+while read verb expect cmd args
+do
+       test_expect_success "$cmd $verb not enough COLUMNS (big change)" '
+               COLUMNS=40 git $cmd $args >output
+               grep " | " output >actual &&
+               test_cmp "$expect" actual
+       '
+
+       test_expect_success "$cmd $verb statGraphWidth config" '
+               git -c diff.statGraphWidth=26 $cmd $args >output
+               grep " | " output >actual &&
+               test_cmp "$expect" actual
+       '
+done <<\EOF
+ignores expect80 format-patch -1 --stdout
+respects expect40 diff HEAD^ HEAD --stat
+respects expect40 show --stat
+respects expect40 log -1 --stat
+EOF
+
+
+cat >expect <<'EOF'
+ abcd | 1000 ++++++++++++++++++++++++++
+EOF
+while read cmd args
+do
+       test_expect_success "$cmd --stat=width with big change" '
+               git $cmd $args --stat=40 >output
+               grep " | " output >actual &&
+               test_cmp expect actual
+       '
+
+       test_expect_success "$cmd --stat-width=width with big change" '
+               git $cmd $args --stat-width=40 >output
+               grep " | " output >actual &&
+               test_cmp expect actual
+       '
+
+       test_expect_success "$cmd --stat-graph--width with big change" '
+               git $cmd $args --stat-graph-width=26 >output
+               grep " | " output >actual &&
+               test_cmp expect actual
+       '
+done <<\EOF
+format-patch -1 --stdout
+diff HEAD^ HEAD --stat
+show --stat
+log -1 --stat
+EOF
+
+test_expect_success 'preparation for long filename tests' '
+       cp abcd aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa &&
+       git add aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa &&
+       git commit -m message
+'
+
+cat >expect <<'EOF'
+ ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 ++++++++++++
+EOF
+while read cmd args
+do
+       test_expect_success "$cmd --stat=width with big change is more balanced" '
+               git $cmd $args --stat-width=60 >output &&
+               grep " | " output >actual &&
+               test_cmp expect actual
+       '
+done <<\EOF
+format-patch -1 --stdout
+diff HEAD^ HEAD --stat
+show --stat
+log -1 --stat
+EOF
+
+cat >expect80 <<'EOF'
+ ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 ++++++++++++++++++++
+EOF
+cat >expect200 <<'EOF'
+ aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+EOF
+while read verb expect cmd args
+do
+       test_expect_success "$cmd $verb COLUMNS (long filename)" '
+               COLUMNS=200 git $cmd $args >output
+               grep " | " output >actual &&
+               test_cmp "$expect" actual
+       '
+done <<\EOF
+ignores expect80 format-patch -1 --stdout
+respects expect200 diff HEAD^ HEAD --stat
+respects expect200 show --stat
+respects expect200 log -1 --stat
+EOF
+
+cat >expect <<'EOF'
+ abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+EOF
+test_expect_success 'merge --stat respects COLUMNS (big change)' '
+       git checkout -b branch HEAD^^ &&
+       COLUMNS=100 git merge --stat --no-ff master^ >output &&
+       grep " | " output >actual
+       test_cmp expect actual
+'
+
+cat >expect <<'EOF'
+ aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 +++++++++++++++++++++++++++++++++++++++
+EOF
+test_expect_success 'merge --stat respects COLUMNS (long filename)' '
+       COLUMNS=100 git merge --stat --no-ff master >output &&
+       grep " | " output >actual
+       test_cmp expect actual
+'
+
+test_done

diff --git a/t/t4150-am.sh b/t/t4150-am.sh
index 6f77fffee60b5e37140dc8952c95144035ed457a..ccc0280f52232e845f9d7c7bd5c3326b412d4a96 100755 (executable)
--- a/t/t4150-am.sh
+++ b/t/t4150-am.sh
@@ -123,6 +123,7 @@ test_expect_success setup '
        git commit -m "added another file" &&
 
        git format-patch --stdout master >lorem-move.patch &&
+       git format-patch --no-prefix --stdout master >lorem-zero.patch &&
 
        git checkout -b rename &&
        git mv file renamed &&
@@ -286,6 +287,20 @@ test_expect_success 'am -3 falls back to 3-way merge' '
        git diff --exit-code lorem
 '
 
+test_expect_success 'am -3 -p0 can read --no-prefix patch' '
+       rm -fr .git/rebase-apply &&
+       git reset --hard &&
+       git checkout -b lorem3 master2 &&
+       sed -n -e "3,\$p" msg >file &&
+       head -n 9 msg >>file &&
+       git add file &&
+       test_tick &&
+       git commit -m "copied stuff" &&
+       git am -3 -p0 lorem-zero.patch &&
+       ! test -d .git/rebase-apply &&
+       git diff --exit-code lorem
+'
+
 test_expect_success 'am can rename a file' '
        grep "^rename from" rename.patch &&
        rm -fr .git/rebase-apply &&

diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh
index 79ee91313059bf2e6efc7fe3c15c6fd56e8fc671..308c02ea75f3400b4d215e6091f03179a93943ad 100755 (executable)
--- a/t/t5510-fetch.sh
+++ b/t/t5510-fetch.sh
@@ -14,6 +14,14 @@ test_bundle_object_count () {
        test "$2" = $(grep '^[0-9a-f]\{40\} ' verify.out | wc -l)
 }
 
+convert_bundle_to_pack () {
+       while read x && test -n "$x"
+       do
+               :;
+       done
+       cat
+}
+
 test_expect_success setup '
        echo >file original &&
        git add file &&
@@ -206,13 +214,7 @@ test_expect_success 'unbundle 1' '
 
 test_expect_success 'bundle 1 has only 3 files ' '
        cd "$D" &&
-       (
-               while read x && test -n "$x"
-               do
-                       :;
-               done
-               cat
-       ) <bundle1 >bundle.pack &&
+       convert_bundle_to_pack <bundle1 >bundle.pack &&
        git index-pack bundle.pack &&
        test_bundle_object_count bundle.pack 3
 '
@@ -229,13 +231,7 @@ test_expect_success 'bundle does not prerequisite objects' '
        git add file2 &&
        git commit -m add.file2 file2 &&
        git bundle create bundle3 -1 HEAD &&
-       (
-               while read x && test -n "$x"
-               do
-                       :;
-               done
-               cat
-       ) <bundle3 >bundle.pack &&
+       convert_bundle_to_pack <bundle3 >bundle.pack &&
        git index-pack bundle.pack &&
        test_bundle_object_count bundle.pack 3
 '
@@ -433,14 +429,31 @@ test_expect_success 'fetch --dry-run' '
 '
 
 test_expect_success "should be able to fetch with duplicate refspecs" '
-        mkdir dups &&
-        cd dups &&
-        git init &&
-        git config branch.master.remote three &&
-        git config remote.three.url ../three/.git &&
-        git config remote.three.fetch +refs/heads/*:refs/remotes/origin/* &&
-        git config --add remote.three.fetch +refs/heads/*:refs/remotes/origin/* &&
-        git fetch three
+       mkdir dups &&
+       (
+               cd dups &&
+               git init &&
+               git config branch.master.remote three &&
+               git config remote.three.url ../three/.git &&
+               git config remote.three.fetch +refs/heads/*:refs/remotes/origin/* &&
+               git config --add remote.three.fetch +refs/heads/*:refs/remotes/origin/* &&
+               git fetch three
+       )
+'
+
+test_expect_success 'all boundary commits are excluded' '
+       test_commit base &&
+       test_commit oneside &&
+       git checkout HEAD^ &&
+       test_commit otherside &&
+       git checkout master &&
+       test_tick &&
+       git merge otherside &&
+       ad=$(git log --no-walk --format=%ad HEAD) &&
+       git bundle create twoside-boundary.bdl master --since="$ad" &&
+       convert_bundle_to_pack <twoside-boundary.bdl >twoside-boundary.pack &&
+       pack=$(git index-pack --fix-thin --stdin <twoside-boundary.pack) &&
+       test_bundle_object_count .git/objects/pack/pack-${pack##pack    }.pack 3
 '
 
 test_done

diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh
index 5c546c99a58854ae0f430e469dad525af52e9292..6764d511ce08cf62da2c257bf5fe50cabaf2f03c 100755 (executable)
--- a/t/t5512-ls-remote.sh
+++ b/t/t5512-ls-remote.sh
@@ -5,7 +5,6 @@ test_description='git ls-remote'
 . ./test-lib.sh
 
 test_expect_success setup '
-
        >file &&
        git add file &&
        test_tick &&
@@ -18,45 +17,33 @@ test_expect_success setup '
        ) >expected.all &&
 
        git remote add self "$(pwd)/.git"
-
 '
 
 test_expect_success 'ls-remote --tags .git' '
-
        git ls-remote --tags .git >actual &&
        test_cmp expected.tag actual
-
 '
 
 test_expect_success 'ls-remote .git' '
-
        git ls-remote .git >actual &&
        test_cmp expected.all actual
-
 '
 
 test_expect_success 'ls-remote --tags self' '
-
        git ls-remote --tags self >actual &&
        test_cmp expected.tag actual
-
 '
 
 test_expect_success 'ls-remote self' '
-
        git ls-remote self >actual &&
        test_cmp expected.all actual
-
 '
 
 test_expect_success 'dies when no remote specified and no default remotes found' '
-
        test_must_fail git ls-remote
-
 '
 
 test_expect_success 'use "origin" when no remote specified' '
-
        URL="$(pwd)/.git" &&
        echo "From $URL" >exp_err &&
 
@@ -65,18 +52,14 @@ test_expect_success 'use "origin" when no remote specified' '
 
        test_cmp exp_err actual_err &&
        test_cmp expected.all actual
-
 '
 
 test_expect_success 'suppress "From <url>" with -q' '
-
        git ls-remote -q 2>actual_err &&
        test_must_fail test_cmp exp_err actual_err
-
 '
 
 test_expect_success 'use branch.<name>.remote if possible' '
-
        #
        # Test that we are indeed using branch.<name>.remote, not "origin", even
        # though the "origin" remote has been set.
@@ -99,14 +82,13 @@ test_expect_success 'use branch.<name>.remote if possible' '
        git ls-remote 2>actual_err >actual &&
        test_cmp exp_err actual_err &&
        test_cmp exp actual
-
 '
 
-cat >exp <<EOF
-fatal: 'refs*master' does not appear to be a git repository
-fatal: The remote end hung up unexpectedly
-EOF
 test_expect_success 'confuses pattern as remote when no remote specified' '
+       cat >exp <<-\EOF &&
+       fatal: '\''refs*master'\'' does not appear to be a git repository
+       fatal: The remote end hung up unexpectedly
+       EOF
        #
        # Do not expect "git ls-remote <pattern>" to work; ls-remote, correctly,
        # confuses <pattern> for <remote>. Although ugly, this behaviour is akin
@@ -120,7 +102,6 @@ test_expect_success 'confuses pattern as remote when no remote specified' '
        # role as a pattern.
        test_must_fail git ls-remote refs*master >actual 2>&1 &&
        test_cmp exp actual
-
 '
 
 test_expect_success 'die with non-2 for wrong repository even with --exit-code' '

diff --git a/t/t5704-bundle.sh b/t/t5704-bundle.sh
index a51c8b0560f85d31dc73d40a58ae3e4c6655f140..9e43731fe504c46737c5294e4d508b5c20bbb663 100755 (executable)
--- a/t/t5704-bundle.sh
+++ b/t/t5704-bundle.sh
@@ -54,8 +54,8 @@ test_expect_success 'ridiculously long subject in boundary' '
        git bundle list-heads long-subject-bundle.bdl >heads &&
        test -s heads &&
        git fetch long-subject-bundle.bdl &&
-       sed -n "/^-/{p;q}" long-subject-bundle.bdl >boundary &&
-       grep "^-$_x40 " boundary
+       sed -n "/^-/{p;q;}" long-subject-bundle.bdl >boundary &&
+       grep "^-[0-9a-f]\\{40\\} " boundary
 '
 
 test_done

diff --git a/t/test-lib.sh b/t/test-lib.sh
index d75766adaf127bbe77022da4ba1e2af1fbdff878..30ed4d74bb2851c1b76f343160a0e34758d580f5 100644 (file)
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -42,10 +42,11 @@ TZ=UTC
 TERM=dumb
 export LANG LC_ALL PAGER TERM TZ
 EDITOR=:
-unset VISUAL
-unset EMAIL
-unset LANGUAGE
-unset $(perl -e '
+# A call to "unset" with no arguments causes at least Solaris 10
+# /usr/xpg4/bin/sh and /bin/ksh to bail out.  So keep the unsets
+# deriving from the command substitution clustered with the other
+# ones.
+unset VISUAL EMAIL LANGUAGE $(perl -e '
        my @env = keys %ENV;
        my $ok = join("|", qw(
                TRACE