![[tokkee]](http://tokkee.org/images/avatar.png){kind=avatar}
summary | shortlog | log | commit | commitdiff | tree
raw | patch | inline | side by side (parent: 3d7277d)
raw | patch | inline | side by side (parent: 3d7277d)
| author | cajus <cajus@594d385d-05f5-0310-b6e9-bd551577e9d8> | |
| Tue, 10 Jul 2007 12:49:27 +0000 (12:49 +0000) | ||
| committer | cajus <cajus@594d385d-05f5-0310-b6e9-bd551577e9d8> | |
| Tue, 10 Jul 2007 12:49:27 +0000 (12:49 +0000) |
git-svn-id: https://oss.gonicus.de/repositories/gosa/branches/2.5@6808 594d385d-05f5-0310-b6e9-bd551577e9d8
14 files changed:
diff --git a/contrib/altlinux/etc/cyrus.conf b/contrib/altlinux/etc/cyrus.conf
+++ /dev/null
@@ -1,43 +0,0 @@
-# standard standalone server implementation
-
-START {
- # do not delete this entry!
- recover cmd="ctl_cyrusdb -r"
-
- # this is only necessary if using idled for IMAP IDLE
-# idled cmd="idled"
-}
-
-# UNIX sockets start with a slash and are put into /var/lib/imap/socket
-SERVICES {
- # add or remove based on preferences
- imap cmd="imapd" listen="imap" prefork=5
-# imaps cmd="imapd -s" listen="imaps" prefork=1
- pop3 cmd="pop3d" listen="pop3" prefork=3
-# pop3s cmd="pop3d -s" listen="pop3s" prefork=1
- sieve cmd="timsieved" listen="sieve" prefork=0
-# smmapd cmd="smmapd" listen="/var/lib/imap/socket/smmapd" prefork=1
-
- # these are only necessary if receiving/exporting usenet via NNTP
-# nntp cmd="nntpd" listen="nntp" prefork=3
-# nntps cmd="nntpd -s" listen="nntps" prefork=1
-
- # at least one LMTP is required for delivery
-# lmtp cmd="lmtpd" listen="lmtp" prefork=0
- lmtpunix cmd="lmtpd" listen="/var/spool/postfix/public/lmtp" prefork=1
-
- # this is only necessary if using notifications
-# notify cmd="notifyd" listen="/var/lib/imap/socket/notify" proto="udp" prefork=1
-}
-
-EVENTS {
- # this is required
- checkpoint cmd="ctl_cyrusdb -c" period=30
-
- # this is only necessary if using duplicate delivery suppression,
- # Sieve or NNTP
- delprune cmd="cyr_expire -E 3" at=0400
-
- # this is only necessary if caching TLS sessions
- tlsprune cmd="tls_prune" at=0400
-}
diff --git a/contrib/altlinux/etc/gosa/gosa.conf b/contrib/altlinux/etc/gosa/gosa.conf
+++ /dev/null
@@ -1,170 +0,0 @@
-<?xml version="1.0"?>
-<conf>
- <menu>
- <section name="My account">
- <plugin acl="default" class="user" icon="personal.png"
- path="plugins/personal/generic" />
- <plugin acl="default" class="posixAccount" icon="posix.png"
- path="plugins/personal/posix" />
- <plugin acl="default" class="mailAccount" icon="email.png"
- path="plugins/personal/mail" />
- <plugin acl="default" class="sambaAccount" icon="samba.png"
- path="plugins/personal/samba" />
- <plugin acl="default" class="proxyAccount" icon="proxy.png"
- path="plugins/personal/proxy" />
- <plugin acl="default" class="pureftpdAccount" icon="ftp.png"
- path="plugins/personal/pureftpd" />
- <plugin acl="default" class="gofaxAccount" icon="fax.png"
- path="plugins/gofax/faxaccount" />
- <!--
- <plugin acl="default" class="phoneAccount" icon="phone.png"
- path="plugins/gofon/phoneaccount" />
- -->
- <plugin acl="default" class="password" icon="password.png"
- path="plugins/personal/password" />
- </section>
-
- <section name="Administration">
- <plugin acl="user" class="userManagement" icon="user.png"
- path="plugins/admin/users" />
- <plugin acl="group" class="groupManagement" icon="group.png"
- path="plugins/admin/groups" />
- <plugin acl="ogroup" class="ogroupManagement" icon="ogroup.png"
- path="plugins/admin/ogroups" />
- <plugin acl="department" class="departmentManagement" icon="department.png"
- path="plugins/admin/departments" />
- <plugin acl="application" class="applicationManagement"
- icon="application.png" path="plugins/admin/applications" />
- <plugin acl="blocklists" class="blocklist" icon="blocklists.png"
- path="plugins/gofax/blocklists" />
- <!--
- <plugin acl="terminal" class="systems" icon="terminal.png"
- path="plugins/admin/terminals" />
- -->
- </section>
-
- <section name="Addons">
- <plugin acl="default" class="addressbook" icon="addressbook.png"
- path="plugins/addons/addressbook" />
- <plugin acl="default" class="faxreport" icon="reports.png"
- path="plugins/gofax/reports" />
- <!--
- <plugin acl="default" class="fonreport" icon="phonereports.png"
- path="plugins/gofon/reports" />
- -->
- <plugin acl="logs" class="logview" icon="logview.png"
- path="plugins/addons/logview" />
- <plugin acl="ldif" class="export" icon="ldif.png"
- path="plugins/addons/ldifexport" />
- </section>
- </menu>
-
- <usertabs>
- <tab class="user" name="Generic" />
- <tab class="posixAccount" name="Unix" />
- <tab class="mailAccount" name="Mail" />
- <tab class="sambaAccount" name="Samba" />
- <tab class="proxyAccount" name="Proxy" />
- <tab class="pureftpdAccount" name="FTP" />
- <tab class="gofaxAccount" name="Fax" />
- <!--
- <tab class="phoneAccount" name="Phone" />
- -->
- <tab class="reference" name="References" />
- </usertabs>
-
- <grouptabs>
- <tab class="group" name="Generic" />
- <tab class="appgroup" name="Applications" />
- <tab class="mailgroup" name="Mail" />
- <tab class="acl" name="ACL" />
- <tab class="reference" name="References" />
- </grouptabs>
-
- <appstabs>
- <tab class="application" name="Generic" />
- <tab class="applicationParameters" name="Options" />
- <tab class="reference" name="References" />
- </appstabs>
-
- <termtabs>
- <tab class="termgeneric" name="Generic" />
- <tab class="termservice" name="Devices" />
- <tab class="termstartup" name="Startup" />
- <tab class="terminfo" name="Monitoring"
- wakecmd="/usr/bin/sudo /usr/sbin/etherwake" />
- <tab class="reference" name="References" />
- </termtabs>
-
- <worktabs>
- <tab class="workgeneric" name="Generic" />
- <tab class="termservice" name="Devices" />
- <tab class="termstartup" name="Startup" />
- <tab class="terminfo" name="Monitoring"
- wakecmd="/usr/bin/sudo /usr/sbin/etherwake" />
- <tab class="reference" name="References" />
- </worktabs>
-
- <printtabs>
- <tab class="printgeneric" name="Generic" />
- <tab class="reference" name="References" />
- </printtabs>
-
- <phonetabs>
- <tab class="phonegeneric" name="Generic" />
- <tab class="reference" name="References" />
- </phonetabs>
-
- <deptabs>
- <tab class="department" name="Generic" />
- <tab class="reference" name="References" />
- </deptabs>
-
- <ogrouptabs>
- <tab class="ogroup" name="Generic" />
- <tab class="reference" name="References" />
- </ogrouptabs>
-
-
- <main default="EXAMPLE.COM"
- compile="/var/spool/gosa"
- lang=""
- theme="default"
- debuglevel="0"
- forcessl="false"
- warnssl="false"
- iconsize="48x48"
- pwminlen="6"
- forceglobals="false"
- smbhash='mkntpwd'>
-
- <location name="EXAMPLE.COM"
- uidbase="1000"
- governmentmode="false"
- sambaversion="3"
- server="ldap://localhost:389"
- admin="cn=gosa,ou=Apps,dc=example,dc=com"
- mailMethod="Cyrus"
- hash="md5"
- password="gosa"
- dnmode="uid"
- base="dc=example,dc=com"
- people="People"
- groups="Groups"
- config="ou=gosa,ou=configs,ou=systems,dc=example,dc=com" />
-
- <language name="Russian" tag="ru_RU" />
- <language name="German" tag="de_DE" />
- <language name="Spanish" tag="es_ES" />
- <language name="French" tag="fr_FR" />
- <language name="English" tag="en_EN" />
-
- <faxformat type="pdf" />
- <faxformat type="ps" />
- <faxformat type="png" />
- <faxformat type="mtiff" />
- <faxformat type="tiff" />
- </main>
-</conf>
-
-
diff --git a/contrib/altlinux/etc/imapd.conf b/contrib/altlinux/etc/imapd.conf
+++ /dev/null
@@ -1,210 +0,0 @@
-# In more detail to look in man 5 imapd.conf
-
-#@include: <none>
-
-admins: cyrus
-
-#afspts_localrealms: <none>
-#afspts_mycell: <none>
-
-#allowallsubscribe: 0
-#allowanonymouslogin: 0
-allowapop: 0
-#allownewnews: 0
-allowplaintext: 1
-#allowusermoves: 0
-#altnamespace: 0
-sasl_mech_list: plain
-
-annotation_db: skiplist
-
-autocreatequota: 10240
-#createonpost: 0
-#autocreateinboxfolders: <none>
-#autosubscribeinboxfolders: <none>
-#autosubscribesharedfolders: <none>
-
-#berkeley_cachesize: 512
-#berkeley_locks_max: 50000
-#berkeley_txns_max: 100
-
-
-configdirectory: /var/lib/imap
-#debug_command: <none>
-#defaultacl: anyone lrs
-
-#defaultdomain: taf.ru
-#defaultpartition: default
-#deleteright: c
-
-duplicate_db: berkeley-nosync
-duplicatesuppression: 0
-
-#foolstupidclients: 0
-#force_sasl_client_mech: <none>
-#fulldirhash: 0
-
-hashimapspool: 1
-#hostname_mechs: <none>
-#hostname_password: <none>
-
-idlesocket: /var/lib/imap/socket/idle
-#ignorereference: 0
-#imapidlepoll: 60
-imapidresponse: 0
-#imapmagicplus: 0
-#implicit_owner_rights: lca
-
-#ldap_authz: <none>
-#ldap_base: <none>
-#ldap_bind_dn: <none>
-#ldap_deref: never
-#ldap_filter: <none>
-#ldap_group_base: <empty string>
-#ldap_group_filter: (cn=%u)
-#ldap_group_scope: sub
-#ldap_id: <none>
-#ldap_mech: <none>
-#ldap_member_attribute: <none>
-#ldap_member_base: <empty string>
-#ldap_member_filter: (member=%D)
-#ldap_member_method: attribute
-#ldap_member_scope: sub
-#ldap_password: <none>
-#ldap_realm: <none>
-#ldap_referrals: 0
-#ldap_restart: 1
-#ldap_sasl: 1
-#ldap_sasl_authc: <none>
-#ldap_sasl_authz: <none>
-#ldap_sasl_mech: <none>
-#ldap_sasl_password: <none>
-#ldap_sasl_realm: <none>
-#ldap_scope: sub
-#ldap_servers: ldap://localhost/
-#ldap_size_limit: 1
-#ldap_start_tls: 0
-#ldap_time_limit: 5
-#ldap_timeout: 5
-#ldap_tls_cacert_dir: <none>
-#ldap_tls_cacert_file: <none>
-#ldap_tls_cert: <none>
-#ldap_tls_check_peer: 0
-#ldap_tls_ciphers: <none>
-#ldap_tls_key: <none>
-#ldap_uri: <none>
-#ldap_version: 3
-
-
-
-lmtp_downcase_rcpt: 1
-lmtp_over_quota_perm_failure: yes
-#lmtpsocket: {configdirectory}/socket/lmtp
-lmtpsocket: /var/spool/postfix/public/lmtp
-
-#loginrealms: <empty string>
-#loginuseacl: 0
-#logtimestamps: 0
-
-#mailnotifier: <none>
-#maxmessagesize: 0
-
-mboxlist_db: skiplist
-
-#mupdate_connections_max: 128
-#mupdate_authname: <none>
-#mupdate_password: <none>
-#mupdate_port: 3905
-#mupdate_realm: <none>
-#mupdate_retry_delay: 20
-#mupdate_server: <none>
-#mupdate_workers_start: 5
-#mupdate_workers_minspare: 2
-#mupdate_workers_maxspare: 10
-#mupdate_workers_max: 50
-#mupdate_username: <empty string>
-
-#netscapeurl: http://asg.web.cmu.edu/cyrus/imapd/netscape-admin.html
-
-#newsmaster: news
-#newspeer: <none>
-#newspostuser: <none>
-#newsprefix: <none>
-#notifysocket: {configdirectory}/socket/notify
-
-partition-default: /var/spool/imap
-#partition-name: <none>
-#plaintextloginpause: 0
-
-#popexpiretime: -1
-#popminpoll: 0
-poptimeout: 5
-#postmaster: postmaster
-#postuser: <empty string>
-#proxy_authname: proxy
-#proxy_password: <none>
-#proxy_realm: <none>
-#proxyd_allow_status_referral: 0
-#proxyservers: <none>
-
-#ptloader_sock: <none>
-
-#ptscache_db: berkeley
-#ptscache_timeout: 10800
-#ptskrb5_convert524: 1
-
-#quota_db: quotalegacy
-#quotawarn: 90
-#quotawarnkb: 0
-
-# If you want to have 8-bit symbols in 'Subject' the
-# reject8bit should matter 0
-reject8bit: 0
-
-#rfc2046_strict: 0
-#rfc3028_strict: 1
-
-#sasl_auto_transition: 0
-#sasl_maximum_layer: 256
-#sasl_minimum_layer: 0
-#sasl_option: 0
-sasl_pwcheck_method: saslauthd
-
-seenstate_db: skiplist
-
-sendmail: /usr/sbin/sendmail
-servername: example.com
-
-#sharedprefix: Shared Folders
-#sieve_maxscriptsize: 32
-#sieve_maxscripts: 5
-sievedir: /var/lib/imap/sieve
-#sievenotifier: <none>
-#sieveusehomedir: 0
-
-#singleinstancestore: 1
-#skiplist_unsafe: 0
-#soft_noauth: 1
-#srvtab: <empty string>
-
-subscription_db: flat
-
-#syslog_prefix: <none>
-
-#temp_path: /tmp
-#timeout: 30
-#tls_ca_file: <none>
-#tls_ca_path: <none>
-#tlscache_db: berkeley-nosync
-#tls_cert_file: /var/lib/ssl/certs/cyrus-imapd.pem
-#tls_cipher_list: DEFAULT
-#tls_key_file: /var/lib/ssl/certs/cyrus-imapd.pem
-#tls_require_cert: 0
-#tls_session_timeout: 1440
-
-#umask: 077
-username_tolower: 1
-#userprefix: Other Users
-#unix_group_enable: 1
-#unixhierarchysep: 0
-#virtdomains: on
diff --git a/contrib/altlinux/etc/ldap.conf b/contrib/altlinux/etc/ldap.conf
+++ /dev/null
@@ -1,227 +0,0 @@
-# @(#)$Id: ldap.conf,v 1.1 2004/09/16 06:46:19 migor-guest Exp $
-#
-# This is the configuration file for the LDAP nameservice
-# switch library and the LDAP PAM module.
-#
-# PADL Software
-# http://www.padl.com
-#
-
-# Your LDAP server. Must be resolvable without using LDAP.
-# Multiple hosts may be specified, each separated by a
-# space. How long nss_ldap takes to failover depends on
-# whether your LDAP client library supports configurable
-# network or connect timeouts (see bind_timelimit).
-#host 127.0.0.1
-
-# The distinguished name of the search base.
-base dc=example,dc=com
-
-# Another way to specify your LDAP server is to provide an
-# uri with the server name. This allows to use
-# Unix Domain Sockets to connect to a local LDAP Server.
-uri ldap://127.0.0.1/
-#uri ldaps://127.0.0.1/
-#uri ldapi://%2fvar%2frun%2fldapi_sock/
-# Note: %2f encodes the '/' used as directory separator
-
-# The LDAP version to use (defaults to 3
-# if supported by client library)
-ldap_version 3
-
-# The distinguished name to bind to the server with.
-# Optional: default is to bind anonymously.
-#binddn cn=proxyuser,dc=example,dc=com
-
-# The credentials to bind with.
-# Optional: default is no credential.
-#bindpw secret
-
-# The distinguished name to bind to the server with
-# if the effective user ID is root. Password is
-# stored in /etc/ldap.secret (mode 600)
-#rootbinddn cn=manager,dc=example,dc=com
-
-# The port.
-# Optional: default is 389.
-#port 389
-
-# The search scope.
-#scope sub
-#scope one
-#scope base
-
-# Search timelimit
-#timelimit 30
-
-# Bind/connect timelimit
-#bind_timelimit 30
-
-# Reconnect policy: hard (default) will retry connecting to
-# the software with exponential backoff, soft will fail
-# immediately.
-#bind_policy hard
-
-# Idle timelimit; client will close connections
-# (nss_ldap only) if the server has not been contacted
-# for the number of seconds specified below.
-#idle_timelimit 3600
-
-# Filter to AND with uid=%s
-#pam_filter objectclass=account
-
-# The user ID attribute (defaults to uid)
-#pam_login_attribute uid
-
-# Search the root DSE for the password policy (works
-# with Netscape Directory Server)
-#pam_lookup_policy yes
-
-# Group to enforce membership of
-#pam_groupdn cn=PAM,ou=Groups,dc=example,dc=com
-
-# Group member attribute
-#pam_member_attribute uniquemember
-
-# Template login attribute, default template user
-# (can be overriden by value of former attribute
-# in user's entry)
-#pam_login_attribute userPrincipalName
-#pam_template_login_attribute uid
-#pam_template_login nobody
-
-# HEADS UP: the pam_crypt, pam_nds_passwd,
-# and pam_ad_passwd options are no
-# longer supported.
-
-# Do not hash the password at all; presume
-# the directory server will do it, if
-# necessary. This is the default.
-#pam_password clear
-
-# Hash password locally; required for University of
-# Michigan LDAP server, and works with Netscape
-# Directory Server if you're using the UNIX-Crypt
-# hash mechanism and not using the NT Synchronization
-# service.
-#pam_password crypt
-
-# Remove old password first, then update in
-# cleartext. Necessary for use with Novell
-# Directory Services (NDS)
-#pam_password nds
-
-# Update Active Directory password, by
-# creating Unicode password and updating
-# unicodePwd attribute.
-#pam_password ad
-
-# Use the OpenLDAP password change
-# extended operation to update the password.
-#pam_password exop
-
-# RFC2307bis naming contexts
-# Syntax:
-# nss_base_XXX base?scope?filter
-# where scope is {base,one,sub}
-# and filter is a filter to be &'d with the
-# default filter.
-# You can omit the suffix eg:
-# nss_base_passwd ou=People,
-# to append the default base DN but this
-# may incur a small performance impact.
-#nss_base_passwd ou=People,dc=example,dc=com?one
-#nss_base_shadow ou=People,dc=example,dc=com?one
-#nss_base_group ou=Groups,dc=example,dc=com?one
-#nss_base_hosts ou=Hosts,dc=example,dc=com?one
-#nss_base_services ou=Services,dc=example,dc=com?one
-#nss_base_networks ou=Networks,dc=example,dc=com?one
-#nss_base_protocols ou=Protocols,dc=example,dc=com?one
-#nss_base_rpc ou=Rpc,dc=example,dc=com?one
-#nss_base_ethers ou=Ethers,dc=example,dc=com?one
-#nss_base_netmasks ou=Networks,dc=example,dc=com?ne
-#nss_base_bootparams ou=Ethers,dc=example,dc=com?one
-#nss_base_aliases ou=Aliases,dc=example,dc=com?one
-#nss_base_netgroup ou=Netgroup,dc=example,dc=com?one
-
-# attribute/objectclass mapping
-# Syntax:
-#nss_map_attribute rfc2307attribute mapped_attribute
-#nss_map_objectclass rfc2307objectclass mapped_objectclass
-
-# configure --enable-nds is no longer supported.
-# For NDS now do:
-#nss_map_attribute uniqueMember member
-
-# configure --enable-mssfu-schema is no longer supported.
-# For MSSFU now do:
-#nss_map_objectclass posixAccount User
-#nss_map_attribute uid msSFUName
-#nss_map_attribute uniqueMember posixMember
-#nss_map_attribute userPassword msSFUPassword
-#nss_map_attribute homeDirectory msSFUHomeDirectory
-#nss_map_objectclass posixGroup Group
-#nss_map_attribute cn msSFUName
-#pam_login_attribute msSFUName
-#pam_filter objectclass=User
-#pam_password ad
-
-# Alternatively, if you wish to equivalence W2K and POSIX
-# groups, change the uniqueMember mapping line to:
-#nss_map_attribute uniqueMember member
-
-# configure --enable-authpassword is no longer supported
-# For authPassword support, now do:
-#nss_map_attribute userPassword authPassword
-#pam_password nds
-
-# For IBM AIX SecureWay support, do:
-#nss_map_objectclass posixAccount aixAccount
-#nss_base_passwd ou=aixaccount,?one
-#nss_map_attribute uid userName
-#nss_map_attribute gidNumber gid
-#nss_map_attribute uidNumber uid
-#nss_map_attribute userPassword passwordChar
-#nss_map_objectclass posixGroup aixAccessGroup
-#nss_base_group ou=aixgroup,?one
-#nss_map_attribute cn groupName
-#nss_map_attribute uniqueMember member
-#pam_login_attribute userName
-#pam_filter objectclass=aixAccount
-#pam_password clear
-
-# Netscape SDK LDAPS
-#ssl on
-
-# Netscape SDK SSL options
-#sslpath /etc/ssl/certs/cert7.db
-
-# OpenLDAP SSL mechanism
-# start_tls mechanism uses the normal LDAP port, LDAPS typically 636
-#ssl start_tls
-#ssl on
-
-# OpenLDAP SSL options
-# Require and verify server certificate (yes/no)
-# Default is "no"
-#tls_checkpeer yes
-
-# CA certificates for server certificate verification
-# At least one of these are required if tls_checkpeer is "yes"
-#tls_cacertfile /etc/ssl/ca.cert
-#tls_cacertdir /etc/ssl/certs
-
-# SSL cipher suite
-# See man ciphers for syntax
-#tls_ciphers TLSv1
-
-# Client certificate and key
-# Use these, if your server requires client authentication.
-#tls_cert
-#tls_key
-
-# Disable SASL security layers. This is needed for AD.
-#sasl_secprops maxssf=0
-
-# Override the default Kerberos ticket cache location.
-#krb5_ccname FILE:/etc/.ldapcache
diff --git a/contrib/altlinux/etc/nsswitch.conf b/contrib/altlinux/etc/nsswitch.conf
+++ /dev/null
@@ -1,62 +0,0 @@
-#
-# Please refer to nsswitch.conf(5) for more information on this file.
-#
-# This is the Name Service Switch configuration file. This file should
-# be sorted with the most-used databases at the beginning.
-#
-# Specifying '[NOTFOUND=return]' means that the search for an entry
-# should stop if the search with the previous service turned up nothing.
-# Note that if the search failed due to some other reason (like no NIS
-# server responding) then the search continues with the next service.
-#
-# Legal name services are:
-#
-# files Use local files
-# tcb Use local tcb shadow files, see tcb(5)
-# db Use local database files under /var/db
-# nis or yp Use NIS (NIS version 2), also called YP
-# nisplus or nis+ Use NIS+ (NIS version 3)
-# dns Use DNS (Domain Name Service)
-# compat Use NIS in compatibility mode
-# hesiod Use Hesiod for user lookups
-# [NOTFOUND=return] Stop searching if not found so far
-#
-
-passwd: files ldap
-shadow: tcb ldap
-group: files ldap
-
-hosts: files nisplus nis dns
-
-# To use db, put the "db" in front of "files" for things you want to be
-# looked up first in the db files.
-#
-#passwd: db files nisplus nis
-#shadow: db tcb files nisplus nis
-#group: db files nisplus nis
-#
-#hosts: db files nisplus nis dns
-
-ethers: files
-netmasks: files
-networks: files
-protocols: files
-rpc: files
-services: files
-
-# Example - obey only what nisplus tells us...
-#services: nisplus [NOTFOUND=return] files
-#networks: nisplus [NOTFOUND=return] files
-#protocols: nisplus [NOTFOUND=return] files
-#rpc: nisplus [NOTFOUND=return] files
-#ethers: nisplus [NOTFOUND=return] files
-#netmasks: nisplus [NOTFOUND=return] files
-
-bootparams: nisplus [NOTFOUND=return] files
-
-netgroup: nisplus
-
-publickey: nisplus
-
-automount: files nisplus
-aliases: files nisplus
diff --git a/contrib/altlinux/etc/openldap/ldap.conf b/contrib/altlinux/etc/openldap/ldap.conf
+++ /dev/null
@@ -1,17 +0,0 @@
-# $OpenLDAP: pkg/ldap/libraries/libldap/ldap.conf,v 1.9 2000/09/04 19:57:01 kurt Exp $
-#
-# LDAP Defaults
-#
-
-# See ldap.conf(5) for details
-# This file should be world readable but not world writable.
-
-BASE dc=example,dc=com
-URI ldap://localhost
-
-#URI ldap://ldap.example.com ldap://ldap-master.example.com:666
-
-#SIZELIMIT 12
-#TIMELIMIT 15
-#DEREF never
-
diff --git a/contrib/altlinux/etc/openldap/slapd.conf b/contrib/altlinux/etc/openldap/slapd.conf
+++ /dev/null
@@ -1,311 +0,0 @@
-# $OpenLDAP: pkg/ldap/servers/slapd/slapd.conf,v 1.23.2.8 2003/05/24 23:19:14 kurt Exp $
-#
-# See slapd.conf(5) for details on configuration options.
-# This file should NOT be world readable.
-#
-# [ GLOBAL SETTINGS ]
-# Default schemas
-include /etc/openldap/schema/core.schema
-include /etc/openldap/schema/cosine.schema
-include /etc/openldap/schema/inetorgperson.schema
-include /etc/openldap/schema/openldap.schema
-include /etc/openldap/schema/nis.schema
-#include /etc/openldap/schema/misc.schema
-#include /etc/openldap/schema/rfc822-MailMember.schema
-#include /etc/openldap/schema/kerberosobject.schema
-#include /etc/openldap/schema/corba.schema
-#include /etc/openldap/schema/java.schema
-# Addon schemas
-#include /etc/openldap/schema/autofs.schema
-#include /etc/openldap/schema/courier.schema
-#include /etc/openldap/schema/dnszone.schema
-#include /etc/openldap/schema/qmail.schema
-#include /etc/openldap/schema/qmailControl.schema
-#include /etc/openldap/schema/samba2.schema
-include /etc/openldap/schema/samba3.schema
-# Experementel schemas
-#include /etc/openldap/schema/cron.schema
-#include /etc/openldap/schema/trust.schema
-#include /etc/openldap/schema/turbo.schema
-# Netscape roaming
-#include /etc/openldap/schema/mull.schema
-#include /etc/openldap/schema/netscape-profile.schema
-# Local schema
-
-# GOSA2 schemas
-#include /etc/openldap/schema/local.schema
-include /etc/openldap/schema/gohard.schema
-include /etc/openldap/schema/goto.schema
-include /etc/openldap/schema/gofax.schema
-include /etc/openldap/schema/goserver.schema
-include /etc/openldap/schema/gosa+samba3.schema
-#include /etc/openldap/schema/gosa.schema
-
-# Specify a set of features (separated by white space) to allow.
-allow bind_v2
-
-# Do not enable referrals until AFTER you have a working directory
-# service AND an understanding of referrals.
-#referral ldap://root.openldap.org
-
-# Specify a desired level of concurrency. Provided to the underlying thread
-# system as a hint. The default is not to provide any hint.
-concurency 20
-
-# Specify the maximum number of pending requests for an anonymous session. If
-# requests are submitted faster than the server can process them, they will
-# be queued up to this limit. If the limit is exceeded, the session is closed.
-#conn_max_pending 100
-
-# Specify the maximum number of pending requests for an
-# authenticated session.
-#conn_max_pending 1000
-
-# Specify a default search base to use when client submits a non-base search
-# request with an empty base DN.
-defaultsearchbase "dc=example,dc=com"
-
-# A SIGHUP signal will only cause a 'gentle' shutdown-attempt: Slapd will
-# stop listening for new connections, but will not close the connections to
-# the current clients.
-gentlehup on
-
-# Specify the number of seconds to wait before forcibly closing an idle client
-# connection. A idletimeout of 0 disables this feature.
-#idletimeout 0
-
-# Specify time and size limits based on who initiated an operation.
-#sizelimit 500
-#timelimit 60
-#limits anonymous time.soft=60 time.hard=120
-#limits anonymous size.soft=1000 size.hard=1100 size.unchecked=1000
-#limits users time.soft=60 time.hard=120
-#limits users size=1000
-#limits dn.base="ou=People,dc=example,dc=com" size=100
-
-# Specify the level at which debugging statements and operation statistics
-# should be syslogged (currently logged to the syslogd(8) LOG_LOCAL4 facility).
-# Log levels are additive, and available levels are:
-# -1 full
-# 0 none
-# 1 trace function calls
-# 2 debug packet handling
-# 4 heavy trace debugging
-# 8 connection management
-# 16 print out packets sent and received
-# 32 search filter processing
-# 64 configuration file processing
-# 128 access control list processing
-# 256 stats log connections/operations/results
-# 512 stats log entries sent
-# 1024 print communication with shell backends
-# 2048 entry parsing
-#loglevel 256
-
-# This option sets the hash to be used in generation of user passwords, stored
-# in userPassword, during processing of LDAP Password Modify Extended
-# Operations (RFC 3062). The <hash> must be one of {SSHA}, {SHA}, {SMD5},
-# {MD5}, {CRYPT}, and {CLEARTEXT}. The default is {SSHA}.
-#password-hash {SSHA}
-
-# The ( absolute ) name of a file that will hold the server's process ID
-# if started without the debugging command line option.
-pidfile /var/run/slapd.pid
-argsfile /var/run/slapd.args
-replica-pidfile /var/run/slurpd.pid
-replica-argsfile /var/run/slurpd.args
-
-# Specify a set of conditions (separated by white space) to require (default
-# none). The directive may be specified globally and/or per-database. bind
-# requires bind operation prior to directory operations. LDAPv3 requires
-# session to be using LDAP version 3. authc requires authentication prior to
-# directory operations. SASL requires SASL authentication prior to directory
-# operations. strong requires strong authentication prior to directory
-# operations. The strong keyword allows protected "simple" authentication as
-# well as SASL authentication. none may be used to require no conditions
-# (useful for clearly globally set conditions within a particular database).
-#require none
-
-# Specify the name of an LDIF(5) file containing user defined attributes for
-# the root DSE. These attributes are returned in addition to the attributes
-# normally produced by slapd.
-#rootDSE /etc/openldap/rootdse.ldif
-
-# Specify a set of factors (separated by white space) to require. An integer
-# value is associated with each factor and is roughly equivalent of the
-# encryption key length to require. A value of 112 is equivalent to 3DES, 128
-# to Blowfish, etc..
-# Require integrity protection (prevent hijacking)
-# Require 112-bit (3DES or better) encryption for updates
-# Require 63-bit encryption for simple bind
-#security ssf=1 update_ssf=112 simple_bind=64
-
-# Specify the maximum size of the primary thread pool. The default is 16.
-#threads 16
-
-
-#
-# [ TLS OPTIONS ]
-#
-# Permits configuring what ciphers will be accepted and the preference order.
-# <cipher-suite-spec> should be a cipher specification for OpenSSL.
-#TLSCipherSuite HIGH:MEDIUM:+SSLv2
-
-# Specifies the path of a directory that contains Certificate Authority
-# certificates in separate individual files. Usually only one of this or the
-# TLSCACertificateFile is used.
-#TLSCACertificateFile /etc/openldap/ssl/slapd.pem
-#TLSCACertificatePath /etc/openldap/ssl
-
-# Specifies the file that contains the slapd server certificate.
-#TLSCertificateFile /etc/openldap/ssl/slapd.pem
-
-# Specifies the file that contains the slapd server private key that matches
-# the certificate stored in the TLSCertificateFile file. Currently, the private
-# key must not be protected with a password, so it is of critical importance
-# that it is protected carefully.
-#TLSCertificateKeyFile /etc/openldap/ssl/slapd.pem
-
-# Specifies what checks to perform on client certificates in an incoming TLS
-# session, if any.
-#TLSVerifyClient never
-
-
-#
-# [ ACCESS CONTROL ]
-#
-# See slapd.access(5) for details
-#access to attrs=userPassword
-# by self write
-# by anonymous auth
-# by * none
-
-
-#
-# [ BACKEND OPTIONS ]
-#
-# Load dynamic backend modules:
-modulepath /usr/lib/openldap
-#moduleload back_dnssrv.la
-#moduleload back_ldap.la
-moduleload back_bdb.la
-#moduleload back_ldbm.la
-#moduleload back_meta.la
-#moduleload back_monitor.la
-#moduleload back_null.la
-#moduleload back_passwd.la
-#moduleload back_shell.la
-#moduleload back_perl.la
-#moduleload back_sql.la
-
-# Options in this section only apply to the configuration file section for the
-# specified backend. They are supported by every type of backend.
-#backend ldbm
-#cachesize 1000
-#dbcachesize 100000
-#dbsync 10 12 5
-
-
-#
-# [ DATABASE OPTIONS ]
-#
-# Mark the beginning of a new database instance definition.
-#database ldbm
-
-# Specify the DN suffix of queries that will be passed to this backend
-# database. Multiple suffix lines can be given and at least one is required for
-# each database definition. If the suffix of one database is "inside" that of
-# another, the database with the inner suffix must come first in the
-# configuration file.
-#suffix "dc=example,dc=com"
-
-# Specify the distinguished name that is not subject to access control or
-# administrative limit restrictions for operations on this database. An empty
-# root DN (the default) specifies no root access is to be granted. It is
-# recommended that the rootdn only be specified when needed (such as when
-# initially populating a database).
-#rootdn "cn=admin,dc=example,dc=com"
-
-# Specify a password (or hash of the password) for the rootdn. This option
-# accepts all RFC 2307 userPassword formats known to the server (see
-# password-hash desription) as well as cleartext.
-#rootpw secret
-
-# Controls whether slapd will automatically maintain the modifiersName,
-# modifyTimestamp, creatorsName, and createTimestamp attributes for entries.
-#lastmod on
-
-# Specifies the maximum number of aliases to dereference when trying to resolve
-# an entry, used to avoid inifinite alias loops.
-#maxderefdepth 1
-
-# This option puts the database into "read-only" mode. Any attempts to modify
-# the database will return an "unwilling to perform" error.
-#readonly on
-
-# Specify a replication site for this database. Refer to the "OpenLDAP
-# Administrator's Guide" for detailed information on setting up a replicated
-# slapd directory service.
-#replica uri=ldaps://ldap2.example.com/
-
-# Specify the name of the replication log file to log changes to.
-#replogfile /var/lib/ldap/replica/example.com.replog
-
-# Specify that the current backend database is a subordinate of another backend
-# database. A subordinate database may have only one suffix. This option may be
-# used to glue multiple databases into a single namingContext.
-#subordinate
-
-# This option is only applicable in a slave slapd. It specifies the DN allowed
-# to make changes to the replica
-#updatedn "cn=slave,dc=example,dc=com"
-
-# Specify the referral to pass back when slapd(8) is asked to modify a
-# replicated local database. If specified multiple times, each url is provided.
-#updateref "uri=ldap://ldap2.example.com"
-
-# Specify the directory where the LDBM files containing this database and
-# associated indexes live.
-#directory /var/lib/ldap/bases/example.com
-
-# Specify the indexes to maintain for the given attribute (or list of
-# attributes). Some attributes only support a subset of indexes.Specify the
-# indexes to maintain for the given attribute (or list of attributes). Some
-# attributes only support a subset of indexes.
-#index objectClass eq
-#index uid pres,eq,sub
-#index cn pres,eq,sub,subany
-
-#access to *
-# by * read
-
-
-#
-# Next database instance
-#
-database bdb
-suffix "dc=example,dc=com"
-#rootdn "cn=admin,dc=example,dc=com"
-#rootpw secret
-directory /var/lib/ldap/bases/example.com
-
-index objectClass eq
-index uid pres,eq
-index cn pres,eq,sub,subany
-index mail pres,eq
-index gosaMailDeliveryMode pres,eq,sub
-
-access to userPassword
- by dn=".*,ou=Admins,dc=example,dc=com" write
- by dn="cn=gosa,ou=Apps,dc=example,dc=com" write
- by dn="cn=smbpasswd,ou=Apps,dc=example,dc=com" write
- by self write
- by anonymous auth
- by * none
-
-access to *
- by dn=".*,ou=Admins,dc=example,dc=com" write
- by dn="cn=gosa,ou=Apps,dc=example,dc=com" write
- by dn="cn=smbpasswd,ou=Apps,dc=example,dc=com" write
- by * read
-
diff --git a/contrib/altlinux/etc/postfix/main.cf b/contrib/altlinux/etc/postfix/main.cf
+++ /dev/null
@@ -1,596 +0,0 @@
-# Global Postfix configuration file. This file lists only a subset
-# of all 300+ parameters. See the samples/xxx.cf files for a full list.
-#
-# The general format is lines with parameter = value pairs. Lines
-# that begin with whitespace continue the previous line. A value can
-# contain references to other $names or ${name}s.
-#
-# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
-# POSTFIX STILL WORKS AFTER EVERY CHANGE.
-
-# SOFT BOUNCE
-#
-# The soft_bounce parameter provides a limited safety net for
-# testing. When soft_bounce is enabled, mail will remain queued that
-# would otherwise bounce. This parameter disables locally-generated
-# bounces, and prevents the SMTP server from rejecting mail permanently
-# (by changing 5xx replies into 4xx replies). However, soft_bounce
-# is no cure for address rewriting mistakes or mail routing mistakes.
-#
-#soft_bounce = no
-
-# INTERNET HOST AND DOMAIN NAMES
-#
-# The myhostname parameter specifies the internet hostname of this
-# mail system. The default is to use the fully-qualified domain name
-# from gethostname(). $myhostname is used as a default value for many
-# other configuration parameters.
-#
-#myhostname = host.domain.tld
-#myhostname = virtual.domain.tld
-
-# The mydomain parameter specifies the local internet domain name.
-# The default is to use $myhostname minus the first component.
-# $mydomain is used as a default value for many other configuration
-# parameters.
-#
-#mydomain = domain.tld
-
-# SENDING MAIL
-#
-# The myorigin parameter specifies the domain that locally-posted
-# mail appears to come from. The default is to append $myhostname,
-# which is fine for small sites. If you run a domain with multiple
-# machines, you should (1) change this to $mydomain and (2) set up
-# a domain-wide alias database that aliases each user to
-# user@that.users.mailhost.
-#
-# For the sake of consistency between sender and recipient addresses,
-# myorigin also specifies the default domain name that is appended
-# to recipient addresses that have no @domain part.
-#
-#myorigin = $myhostname
-#myorigin = $mydomain
-
-# RECEIVING MAIL
-
-# The inet_interfaces parameter specifies the network interface
-# addresses that this mail system receives mail on. By default,
-# the software claims all active interfaces on the machine. The
-# parameter also controls delivery of mail to user@[ip.address].
-#
-# See also the proxy_interfaces parameter, for network addresses that
-# are forwarded to us via a proxy or network address translator.
-#
-# Note: you need to stop/start Postfix when this parameter changes.
-#
-#inet_interfaces = all
-#inet_interfaces = $myhostname
-#inet_interfaces = $myhostname, localhost
-
-# The proxy_interfaces parameter specifies the network interface
-# addresses that this mail system receives mail on by way of a
-# proxy or network address translation unit. This setting extends
-# the address list specified with the inet_interfaces parameter.
-#
-# You must specify your proxy/NAT addresses when your system is a
-# backup MX host for other domains, otherwise mail delivery loops
-# will happen when the primary MX host is down.
-#
-#proxy_interfaces =
-#proxy_interfaces = 1.2.3.4
-
-# The mydestination parameter specifies the list of domains that this
-# machine considers itself the final destination for.
-#
-# These domains are routed to the delivery agent specified with the
-# local_transport parameter setting. By default, that is the UNIX
-# compatible delivery agent that lookups all recipients in /etc/passwd
-# and /etc/aliases or their equivalent.
-#
-# The default is $myhostname + localhost.$mydomain. On a mail domain
-# gateway, you should also include $mydomain.
-#
-# Do not specify the names of virtual domains - those domains are
-# specified elsewhere (see samples/virtual.cf).
-#
-# Do not specify the names of domains that this machine is backup MX
-# host for. Specify those names via the relay_domains settings for
-# the SMTP server, or use permit_mx_backup if you are lazy (see
-# samples/smtpd.cf).
-#
-# The local machine is always the final destination for mail addressed
-# to user@[the.net.work.address] of an interface that the mail system
-# receives mail on (see the inet_interfaces parameter).
-#
-# Specify a list of host or domain names, /file/name or type:table
-# patterns, separated by commas and/or whitespace. A /file/name
-# pattern is replaced by its contents; a type:table is matched when
-# a name matches a lookup key (the right-hand side is ignored).
-# Continue long lines by starting the next line with whitespace.
-#
-# DO NOT LIST RELAY DESTINATIONS IN MYDESTINATION.
-# SPECIFY RELAY DESTINATIONS IN RELAY_DOMAINS.
-#
-# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
-#
-#mydestination = $myhostname, localhost.$mydomain
-#mydestination = $myhostname, localhost.$mydomain $mydomain
-#mydestination = $myhostname, localhost.$mydomain, $mydomain,
-# mail.$mydomain, www.$mydomain, ftp.$mydomain
-mydestination = localhost, $myhostname, localhost.$mydomain, $config_directory/mydestination
-
-# REJECTING MAIL FOR UNKNOWN LOCAL USERS
-#
-# The local_recipient_maps parameter specifies optional lookup tables
-# with all names or addresses of users that are local with respect
-# to $mydestination and $inet_interfaces.
-#
-# If this parameter is defined, then the SMTP server will reject
-# mail for unknown local users. This parameter is defined by default.
-#
-# To turn off local recipient checking in the SMTP server, specify
-# local_recipient_maps = (i.e. empty).
-#
-# The default setting assumes that you use the default Postfix local
-# delivery agent for local delivery. You need to update the
-# local_recipient_maps setting if:
-#
-# - You define $mydestination domain recipients in files other than
-# /etc/passwd, /etc/postfix/aliases, or the $virtual_alias_maps files.
-# For example, you define $mydestination domain recipients in
-# the $virtual_mailbox_maps files.
-#
-# - You redefine the local delivery agent in master.cf.
-#
-# - You redefine the "local_transport" setting in main.cf.
-#
-# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
-# feature of the Postfix local delivery agent (see samples/local.cf).
-#
-# Details are described in the LOCAL_RECIPIENT_README file.
-#
-# Beware: if the Postfix SMTP server runs chrooted, you probably have
-# to access the passwd file via the proxymap service, in order to
-# overcome chroot restrictions. The alternative, having a copy of
-# the system passwd file in the chroot jail is just not practical.
-#
-# The right-hand side of the lookup tables is conveniently ignored.
-# In the left-hand side, specify a bare username, an @domain.tld
-# wild-card, or specify a user@domain.tld address.
-#
-#local_recipient_maps = unix:passwd.byname $alias_maps
-#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
-#local_recipient_maps =
-
-# The unknown_local_recipient_reject_code specifies the SMTP server
-# response code when a recipient domain matches $mydestination or
-# $inet_interfaces, while $local_recipient_maps is non-empty and the
-# recipient address or address local-part is not found.
-#
-# The default setting is 550 (reject mail) but it is safer to start
-# with 450 (try again later) until you are certain that your
-# local_recipient_maps settings are OK.
-#
-unknown_local_recipient_reject_code = 550
-
-# TRUST AND RELAY CONTROL
-
-# The mynetworks parameter specifies the list of "trusted" SMTP
-# clients that have more privileges than "strangers".
-#
-# In particular, "trusted" SMTP clients are allowed to relay mail
-# through Postfix. See the smtpd_recipient_restrictions parameter
-# in file samples/smtpd.cf.
-#
-# You can specify the list of "trusted" network addresses by hand
-# or you can let Postfix do it for you (which is the default).
-#
-# By default (mynetworks_style = host), Postfix "trusts" SMTP
-# clients of the local machine only.
-#
-# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
-# clients in the same IP class A/B/C networks as the local machine.
-# Don't do this with a dialup site - it would cause Postfix to "trust"
-# your entire provider's network. Instead, specify an explicit
-# mynetworks list by hand, as described below.
-#
-# Specify "mynetworks_style = subnet" when Postfix should "trust" SMTP
-# clients in the same IP subnetworks as the local machine.
-#
-#mynetworks_style = class
-#mynetworks_style = subnet
-#mynetworks_style = host
-
-# Alternatively, you can specify the mynetworks list by hand, in
-# which case Postfix ignores the mynetworks_style setting.
-#
-# Specify an explicit list of network/netmask patterns, where the
-# mask specifies the number of bits in the network part of a host
-# address.
-#
-# You can also specify the absolute pathname of a pattern file instead
-# of listing the patterns here. Specify type:table for table-based lookups
-# (the value on the table right-hand side is not used).
-#
-#mynetworks = 168.100.189.0/28, 127.0.0.0/8
-#mynetworks = $config_directory/mynetworks
-#mynetworks = hash:/etc/postfix/network_table
-
-# The relay_domains parameter restricts what destinations this system will
-# relay mail to. See the smtpd_recipient_restrictions restriction in the
-# file samples/smtpd.cf for detailed information.
-#
-# By default, Postfix relays mail
-# - from "trusted" clients (IP address matches $mynetworks) to any destination,
-# - from "untrusted" clients to destinations that match $relay_domains or
-# subdomains thereof, except addresses with sender-specified routing.
-# The default relay_domains value is $mydestination.
-#
-# In addition to the above, the Postfix SMTP server by default accepts mail
-# that Postfix is final destination for:
-# - destinations that match $inet_interfaces,
-# - destinations that match $mydestination
-# - destinations that match $virtual_alias_domains,
-# - destinations that match $virtual_mailbox_domains.
-# These destinations do not need to be listed in $relay_domains.
-#
-# Specify a list of hosts or domains, /file/name patterns or type:name
-# lookup tables, separated by commas and/or whitespace. Continue
-# long lines by starting the next line with whitespace. A file name
-# is replaced by its contents; a type:name table is matched when a
-# (parent) domain appears as lookup key.
-#
-# NOTE: Postfix will not automatically forward mail for domains that
-# list this system as their primary or backup MX host. See the
-# permit_mx_backup restriction in the file samples/smtpd.cf.
-#
-#relay_domains = $mydestination
-
-# INTERNET OR INTRANET
-
-# The relayhost parameter specifies the default host to send mail to
-# when no entry is matched in the optional transport(5) table. When
-# no relayhost is given, mail is routed directly to the destination.
-#
-# On an intranet, specify the organizational domain name. If your
-# internal DNS uses no MX records, specify the name of the intranet
-# gateway host instead.
-#
-# In the case of SMTP, specify a domain, host, host:port, [host]:port,
-# [address] or [address]:port; the form [host] turns off MX lookups.
-#
-# If you're connected via UUCP, see also the default_transport parameter.
-#
-#relayhost = $mydomain
-#relayhost = gateway.my.domain
-#relayhost = uucphost
-#relayhost = [an.ip.add.ress]
-
-# REJECTING UNKNOWN RELAY USERS
-#
-# The relay_recipient_maps parameter specifies optional lookup tables
-# with all addresses in the domains that match $relay_domains.
-#
-# If this parameter is defined, then the SMTP server will reject
-# mail for unknown relay users. This feature is off by default.
-#
-# The right-hand side of the lookup tables is conveniently ignored.
-# In the left-hand side, specify an @domain.tld wild-card, or specify
-# a user@domain.tld address.
-#
-#relay_recipient_maps = hash:/etc/postfix/relay_recipients
-
-# INPUT RATE CONTROL
-#
-# The in_flow_delay configuration parameter implements mail input
-# flow control. This feature is turned on by default, although it
-# still needs further development (it's disabled on SCO UNIX due
-# to an SCO bug).
-#
-# A Postfix process will pause for $in_flow_delay seconds before
-# accepting a new message, when the message arrival rate exceeds the
-# message delivery rate. With the default 100 SMTP server process
-# limit, this limits the mail inflow to 100 messages a second more
-# than the number of messages delivered per second.
-#
-# Specify 0 to disable the feature. Valid delays are 0..10.
-#
-#in_flow_delay = 1s
-
-# ADDRESS REWRITING
-#
-# Insert text from samples/rewrite.cf if you need to do address
-# masquerading.
-#
-# Insert text from samples/canonical.cf if you need to do address
-# rewriting, or if you need username->Firstname.Lastname mapping.
-
-# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
-#
-# Insert text from samples/virtual.cf if you need virtual domain support.
-
-# "USER HAS MOVED" BOUNCE MESSAGES
-#
-# Insert text from samples/relocated.cf if you need "user has moved"
-# style bounce messages. Alternatively, you can bounce recipients
-# with an SMTP server access table. See samples/smtpd.cf.
-
-# TRANSPORT MAP
-#
-# Insert text from samples/transport.cf if you need explicit routing.
-
-# ALIAS DATABASE
-#
-# The alias_maps parameter specifies the list of alias databases used
-# by the local delivery agent. The default list is system dependent.
-#
-# On systems with NIS, the default is to search the local alias
-# database, then the NIS alias database. See aliases(5) for syntax
-# details.
-#
-# If you change the alias database, run "postalias /etc/postfix/aliases" (or
-# wherever your system stores the mail alias file), or simply run
-# "newaliases" to build the necessary DBM or DB file.
-#
-# It will take a minute or so before changes become visible. Use
-# "postfix reload" to eliminate the delay.
-#
-#alias_maps = dbm:/etc/postfix/aliases
-alias_maps = hash:/etc/postfix/aliases
-#, hash:/var/lib/mailman/etc/aliases
-#alias_maps = hash:/etc/postfix/aliases, nis:mail.aliases
-#alias_maps = netinfo:/aliases
-
-# The alias_database parameter specifies the alias database(s) that
-# are built with "newaliases" or "sendmail -bi". This is a separate
-# configuration parameter, because alias_maps (see above) may specify
-# tables that are not necessarily all under control by Postfix.
-#
-#alias_database = dbm:/etc/postfix/aliases
-alias_database = hash:/etc/postfix/aliases
-#alias_database = hash:/etc/postfix/aliases, hash:/opt/majordomo/aliases
-#virtual_maps = hash:/var/lib/mailman/etc/virtual-mailman
-
-# ADDRESS EXTENSIONS (e.g., user+foo)
-#
-# The recipient_delimiter parameter specifies the separator between
-# user names and address extensions (user+foo). See canonical(5),
-# local(8), relocated(5) and virtual(5) for the effects this has on
-# aliases, canonical, virtual, relocated and .forward file lookups.
-# Basically, the software tries user+foo and .forward+foo before
-# trying user and .forward.
-#
-#recipient_delimiter = +
-
-# DELIVERY TO MAILBOX
-#
-# The home_mailbox parameter specifies the optional pathname of a
-# mailbox file relative to a user's home directory. The default
-# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
-# "Maildir/" for qmail-style delivery (the / is required).
-#
-#home_mailbox = Mailbox
-#home_mailbox = Maildir/
-
-# The mail_spool_directory parameter specifies the directory where
-# UNIX-style mailboxes are kept. The default setting depends on the
-# system type.
-#
-#mail_spool_directory = /var/mail
-#mail_spool_directory = /var/spool/mail
-
-# The mailbox_command parameter specifies the optional external
-# command to use instead of mailbox delivery. The command is run as
-# the recipient with proper HOME, SHELL and LOGNAME environment settings.
-# Exception: delivery for root is done as $default_user.
-#
-# Other environment variables of interest: USER (recipient username),
-# EXTENSION (address extension), DOMAIN (domain part of address),
-# and LOCAL (the address localpart).
-#
-# Unlike other Postfix configuration parameters, the mailbox_command
-# parameter is not subjected to $parameter substitutions. This is to
-# make it easier to specify shell syntax (see example below).
-#
-# Avoid shell meta characters because they will force Postfix to run
-# an expensive shell process. Procmail alone is expensive enough.
-#
-# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
-# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
-#
-#mailbox_command = /usr/bin/procmail -a "$EXTENSION"
-mailbox_command = /usr/bin/procmail -a $DOMAIN -d $LOGNAME
-
-# The mailbox_transport specifies the optional transport in master.cf
-# to use after processing aliases and .forward files. This parameter
-# has precedence over the mailbox_command, fallback_transport and
-# luser_relay parameters.
-#
-# Specify a string of the form transport:nexthop, where transport is
-# the name of a mail delivery transport defined in master.cf. The
-# :nexthop part is optional. For more details see the sample transport
-# configuration file.
-#
-# NOTE: if you use this feature for accounts not in the UNIX password
-# file, then you must update the "local_recipient_maps" setting in
-# the main.cf file, otherwise the SMTP server will reject mail for
-# non-UNIX accounts with "User unknown in local recipient table".
-#
-mailbox_transport = lmtp:unix:/public/lmtp
-#mailbox_transport = cyrus
-
-# The fallback_transport specifies the optional transport in master.cf
-# to use for recipients that are not found in the UNIX passwd database.
-# This parameter has precedence over the luser_relay parameter.
-#
-# Specify a string of the form transport:nexthop, where transport is
-# the name of a mail delivery transport defined in master.cf. The
-# :nexthop part is optional. For more details see the sample transport
-# configuration file.
-#
-# NOTE: if you use this feature for accounts not in the UNIX password
-# file, then you must update the "local_recipient_maps" setting in
-# the main.cf file, otherwise the SMTP server will reject mail for
-# non-UNIX accounts with "User unknown in local recipient table".
-#
-#fallback_transport = lmtp:unix:/private/lmtp
-fallback_transport = cyrus
-#fallback_transport =
-
-# The luser_relay parameter specifies an optional destination address
-# for unknown recipients. By default, mail for unknown@$mydestination
-# and unknown@[$inet_interfaces] is returned as undeliverable.
-#
-# The following expansions are done on luser_relay: $user (recipient
-# username), $shell (recipient shell), $home (recipient home directory),
-# $recipient (full recipient address), $extension (recipient address
-# extension), $domain (recipient domain), $local (entire recipient
-# localpart), $recipient_delimiter. Specify ${name?value} or
-# ${name:value} to expand value only when $name does (does not) exist.
-#
-# luser_relay works only for the default Postfix local delivery agent.
-#
-# NOTE: if you use this feature for accounts not in the UNIX password
-# file, then you must specify "local_recipient_maps =" (i.e. empty) in
-# the main.cf file, otherwise the SMTP server will reject mail for
-# non-UNIX accounts with "User unknown in local recipient table".
-#
-#luser_relay = $user@other.host
-#luser_relay = $local@other.host
-#luser_relay = admin+$local
-
-# JUNK MAIL CONTROLS
-#
-# The controls listed here are only a very small subset. See the file
-# samples/smtpd.cf for an elaborate list of anti-UCE controls.
-
-# The header_checks parameter specifies an optional table with patterns
-# that each logical message header is matched against, including
-# headers that span multiple physical lines.
-#
-# By default, these patterns also apply to MIME headers and to the
-# headers of attached messages. With older Postfix versions, MIME and
-# attached message headers were treated as body text.
-#
-# For details, see the samples/filter.cf file.
-#
-#header_checks = regexp:/etc/postfix/header_checks
-
-# FAST ETRN SERVICE
-#
-# Postfix maintains per-destination logfiles with information about
-# deferred mail, so that mail can be flushed quickly with the SMTP
-# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
-#
-# By default, Postfix maintains deferred mail logfile information
-# only for destinations that Postfix is willing to relay to (as
-# specified in the relay_domains parameter). For other destinations,
-# Postfix attempts to deliver ALL queued mail after receiving the
-# SMTP "ETRN domain.tld" command, or after execution of "sendmail
-# -qRdomain.tld". This can be slow when a lot of mail is queued.
-#
-# The fast_flush_domains parameter controls what destinations are
-# eligible for this "fast ETRN/sendmail -qR" service.
-#
-#fast_flush_domains = $relay_domains
-#fast_flush_domains =
-
-# SHOW SOFTWARE VERSION OR NOT
-#
-# The smtpd_banner parameter specifies the text that follows the 220
-# code in the SMTP server's greeting banner. Some people like to see
-# the mail version advertised. By default, Postfix shows no version.
-#
-# You MUST specify $myhostname at the start of the text. That is an
-# RFC requirement. Postfix itself does not care.
-#
-#smtpd_banner = $myhostname ESMTP $mail_name
-#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
-
-# The smtpd_etrn_restrictions parameter restricts what clients are
-# allowed to issue the ETRN command.
-#
-# The Postfix ETRN command accepts only destinations that are eligible
-# for the Postfix "fast flush" service. See the samples/flush.cf file
-# for details.
-#
-# The default is to allow ETRN from any host. The following restrictions
-# are available:
-#
-# reject_unknown_client: reject the request if the client hostname is unknown.
-# permit_mynetworks: permit if the client address matches $mynetworks.
-# check_client_access maptype:mapname
-# look up client name, parent domains, client address,
-# or networks obtained by stripping octets.
-# see access(5) for possible lookup results.
-# reject_rbl_client domain.tld: reject if the reverse client network
-# address is listed in an A record under domain.tld.
-# reject_rhsbl_client domain.tld: reject if the client hostname is listed
-# in an A record under domain.tld.
-# reject: reject the request. Place this at the end of a restriction.
-# permit: permit the request. Place this at the end of a restriction.
-# warn_if_reject: next restriction logs a warning instead of rejecting.
-#
-# You may also list any helo or client restrictions here (see below).
-#
-smtpd_etrn_restrictions = permit_mynetworks, reject
-
-# The smtpd_helo_required parameter optionally turns on the requirement
-# that SMTP clients must introduce themselves at the beginning of an
-# SMTP session.
-#
-smtpd_helo_required = yes
-
-# PARALLEL DELIVERY TO THE SAME DESTINATION
-#
-# How many parallel deliveries to the same user or domain? With local
-# delivery, it does not make sense to do massively parallel delivery
-# to the same user, because mailbox updates must happen sequentially,
-# and expensive pipelines in .forward files can cause disasters when
-# too many are run at the same time. With SMTP deliveries, 10
-# simultaneous connections to the same domain could be sufficient to
-# raise eyebrows.
-#
-# Each message delivery transport has its XXX_destination_concurrency_limit
-# parameter. The default is $default_destination_concurrency_limit for
-# most delivery transports. For the local delivery agent the default is 2.
-
-#local_destination_concurrency_limit = 2
-#default_destination_concurrency_limit = 20
-
-# INSTALL-TIME CONFIGURATION INFORMATION
-readme_directory = /etc/postfix/README_FILES
-sample_directory = /etc/postfix/samples
-sendmail_path = /usr/sbin/sendmail
-setgid_group = postdrop
-command_directory = /usr/sbin
-manpage_directory = /usr/share/man
-daemon_directory = /usr/lib/postfix
-newaliases_path = /usr/bin/newaliases
-mailq_path = /usr/bin/mailq
-queue_directory = /var/spool/postfix
-mail_owner = postfix
-
-# SASL authenticated SMTPD
-#smtpd_sasl_auth_enable = yes
-#broken_sasl_auth_clients = yes
-#smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, check_relay_domains
-#smtpd_etrn_restrictions = permit_mynetworks, reject
-
-# Virtual users
-virtual_maps = hash:/etc/postfix/virtual
-virtual_alias_maps = ldap:vlocal, ldap:vforward
-
-# Delivery for Local, Local/Forward and Alias
-vlocal_server_host = localhost
-vlocal_search_base = dc=example,dc=com
-vlocal_query_filter = (&(objectClass=gosaMailAccount)(gosaMailDeliveryMode=[*L*])(|(mail=%s)(gosaMailAlternateAddress=%s)))
-vlocal_result_attribute = uid,gosaMailForwardingAddress,memberUid
-
-# Delivery when Forward only
-vforward_server_host = localhost
-vforward_search_base = dc=example,dc=com
-vforward_query_filter = (&(objectClass=gosaMailAccount)(!(gosaMailDeliveryMode=[*L*]))(|(mail=%s)(gosaMailAlternateAddress=%s)))
-vforward_result_attribute = gosaMailForwardingAddress
-
diff --git a/contrib/altlinux/etc/samba/smb.conf b/contrib/altlinux/etc/samba/smb.conf
+++ /dev/null
@@ -1,73 +0,0 @@
-#======================= Global Settings =====================================
-[global]
- ldap server = localhost
- ldap port = 389
- ldap suffix = dc=example,dc=com
- ldap admin dn = cn=smbpasswd,ou=Apps,dc=example,dc=com
-
- ldap user suffix = ou=People
- ldap group suffix = ou=Groups
- ldap machine suffix = ou=Computers
- ldap passwd sync = Yes
-
- workgroup = EXAMPLE
- netbios name = PDC
- server string = Samba server on %h (v. %v)
- #realm = PDC.EXAMPLE.TLD
- announce version = 4.8
- time server = Yes
-
- log file = /var/log/samba/log.%m
- max log size = 50
-
- security = user
- hosts allow = 192.168.1. 127.
- encrypt passwords = yes
- null passwords = No
- min passwd length = 6
- smb passwd file = /etc/samba/smbpasswd
- socket options = TCP_NODELAY
- os level = 254
- nt acl support = No
- passdb backend = ldapsam:ldap://localhost
-
- domain master = yes
- preferred master = yes
- domain logons = yes
- dns proxy = no
-
- #dos charset = CP866
- #unix charset = KOI8-R
- #display charset = KOI8-R
- use sendfile = yes
- preserve case = Yes
- short preserve case = Yes
- case sensitive = Yes
- hide dot files = Yes
-
-#============================ Share Definitions ==============================
-[homes]
- comment = Home Directory for '%u'
- browseable = no
- writable = yes
-
-# Un-comment the following and create the netlogon directory for Domain Logons
-[netlogon]
- comment = Network Logon Service
- path = /var/lib/samba/netlogon
- guest ok = yes
- browsable = no
- writable = no
-
-#Uncomment the following 2 lines if you would like your login scripts to
-#be created dynamically by ntlogon (check that you have it in the correct
-#location (the default of the ntlogon rpm available in contribs)
-;root preexec = /usr/bin/ntlogon -u %U -g %G -o %a -d /var/lib/samba/netlogon
-;root postexec = rm -f /var/lib/samba/netlogon/%U.bat
-
-# Un-comment the following to provide a specific roving profile share
-# the default is to use the user's home directory
-;[Profiles]
-; path = /var/lib/samba/profiles
-; browseable = no
-; guest ok = yes
diff --git a/contrib/altlinux/etc/sasl2/imapd.conf b/contrib/altlinux/etc/sasl2/imapd.conf
+++ /dev/null
@@ -1,2 +0,0 @@
-pwcheck_method: saslauthd
-mech_list: login plain
diff --git a/contrib/altlinux/etc/sasl2/saslauthd.conf b/contrib/altlinux/etc/sasl2/saslauthd.conf
+++ /dev/null
@@ -1,74 +0,0 @@
-ldap_servers: ldap://localhost/
-ldap_bind_dn: cn=saslauthd,ou=Apps,dc=example,dc=com
-ldap_bind_pw: saslauthd
-ldap_version: 3
-# <2|3>
-# Specify the LDAP protocol version to use.
-
-ldap_timeout: 5
-# Specify a number of seconds a search can take before timing out.
-
-ldap_time_limit: 5
-# Specify a number of seconds for a search request to complete.
-
-#ldap_deref: <none> <search|find|always|never>
-# Specify how aliases dereferencing is handled during a search.
-
-#ldap_referrals: <no>
-# Specify whether or not the client should follow referrals.
-
-#ldap_restart: <yes>
-# Specify whether or not LDAP I/O operations are automatically restarted
-# if they abort prematurely.
-
-#ldap_cache_ttl: <0>
-# Non zero enables client side caching. Cached results will expire after
-# specified number seconds, e.g. 30. Use this option with care.
-# OpenLDAP folks consider this feature experimental.
-
-#ldap_cache_mem: <0>
-# If client side caching is enabled, the value specifies the cache size
-# in bytes, e.g. 32768.
-
-#ldap_scope: <sub> <sub|one|base>
-# Search scope.
-
-ldap_search_base: dc=iph,dc=ras,dc=ru
-# Specify a starting point for the search. e.g. dc=foo,dc=com
-
-#ldap_auth_method: <bind> <bind|custom>
-# Specify an authentication method. The default 'bind' method uses the
-# LDAP simple bind facility to verify the password. The custom method
-# uses userPassword attribute to verify the password. Currently, {CRYPT}
-# hash is supported.
-
-ldap_filter: (|(uid=%u)(cn=%u))
-# Specify a filter. Use the %u and %r tokens for the username and realm
-# substitution. The %u token has to be used at minimum for the filter to
-# be useful. If ldap_auth_method is 'bind', the filter will search for
-# the DN (distinguished name) attribute. Otherwise, the search will look
-# for the userPassword attribute.
-
-#ldap_debug: <0>
-# Specify a debugging level in the OpenLDAP libraries. See
-# ldap_set_option(3) for more (LDAP_OPT_DEBUG_LEVEL).
-#
-#ldap_tls_check_peer: <no> <yes|no>
-# Require and verify server certificate. If this option is yes,
-# you must specify ldap_tls_cacert_file or ldap_tls_cacert_dir.
-
-#ldap_tls_cacert_file: <none>
-# File containing CA (Certificate Authority) certificate(s).
-
-#ldap_tls_cacert_dir: <none>
-# Path to directory with CA (Certificate Authority) certificates.
-
-#ldap_tls_ciphers: <DEFAULT>
-# List of SSL/TLS ciphers to allow. The format of the string is
-# described in ciphers(1).
-
-#ldap_tls_cert: <none>
-# File containing the client certificate.
-
-#ldap_tls_key: <none>
-# File containing the private client key.
diff --git a/contrib/altlinux/etc/services b/contrib/altlinux/etc/services
+++ /dev/null
@@ -1,557 +0,0 @@
-# /etc/services:
-# $Id: services,v 1.1 2004/12/08 07:22:10 migor-guest Exp $
-#
-# Network services, Internet style
-#
-# Note that it is presently the policy of IANA to assign a single well-known
-# port number for both TCP and UDP; hence, most entries here have two entries
-# even if the protocol doesn't support UDP operations.
-# Updated from RFC 1700, ``Assigned Numbers'' (October 1994). Not all ports
-# are included, only the more common ones.
-#
-# The latest IANA port assignments can be gotten from
-# http://www.iana.org/assignments/port-numbers
-# The Well Known Ports are those from 0 through 1023.
-# The Registered Ports are those from 1024 through 49151
-# The Dynamic and/or Private Ports are those from 49152 through 65535
-#
-# Each line describes one service, and is of the form:
-#
-# service-name port/protocol [aliases ...] [# comment]
-
-tcpmux 1/tcp # TCP port service multiplexer
-tcpmux 1/udp # TCP port service multiplexer
-rje 5/tcp # Remote Job Entry
-rje 5/udp # Remote Job Entry
-echo 7/tcp
-echo 7/udp
-discard 9/tcp sink null
-discard 9/udp sink null
-systat 11/tcp users # Active Users
-systat 11/udp users # Active Users
-daytime 13/tcp
-daytime 13/udp
-qotd 17/tcp quote # Quote of the Day
-qotd 17/udp quote # Quote of the Day
-msp 18/tcp # Message Send Protocol
-msp 18/udp # Message Send Protocol
-chargen 19/tcp ttytst source # Character Generator
-chargen 19/udp ttytst source # Character Generator
-ftp-data 20/tcp # File Transfer [Default Data]
-ftp-data 20/udp # File Transfer [Default Data]
-# 21 is registered to ftp, but also used by fsp
-ftp 21/tcp # File Transfer [Control]
-ftp 21/udp fsp fspd # File Transfer [Control]
-ssh 22/tcp # SSH Remote Login Protocol
-ssh 22/udp # SSH Remote Login Protocol
-telnet 23/tcp
-telnet 23/udp
-# 24 - private mail system
-smtp 25/tcp mail # Simple Mail Transfer Protocol
-smtp 25/udp mail # Simple Mail Transfer Protocol
-time 37/tcp timserver
-time 37/udp timserver
-rlp 39/tcp resource # Resource Location Protocol
-rlp 39/udp resource # Resource Location Protocol
-nameserver 42/tcp name # Host Name Server
-nameserver 42/udp name # Host Name Server
-nicname 43/tcp whois
-nicname 43/udp whois
-tacacs 49/tcp # Login Host Protocol (TACACS)
-tacacs 49/udp # Login Host Protocol (TACACS)
-re-mail-ck 50/tcp # Remote Mail Checking Protocol
-re-mail-ck 50/udp # Remote Mail Checking Protocol
-domain 53/tcp # Domain Name Server
-domain 53/udp # Domain Name Server
-whois++ 63/tcp
-whois++ 63/udp
-bootps 67/tcp # BOOTP server
-bootps 67/udp
-bootpc 68/tcp # BOOTP client
-bootpc 68/udp
-tftp 69/tcp # Trivial File Transfer
-tftp 69/udp # Trivial File Transfer
-gopher 70/tcp # Internet Gopher
-gopher 70/udp
-netrjs-1 71/tcp # Remote Job Service
-netrjs-1 71/udp # Remote Job Service
-netrjs-2 72/tcp # Remote Job Service
-netrjs-2 72/udp # Remote Job Service
-netrjs-3 73/tcp # Remote Job Service
-netrjs-3 73/udp # Remote Job Service
-netrjs-4 74/tcp # Remote Job Service
-netrjs-4 74/udp # Remote Job Service
-finger 79/tcp
-finger 79/udp
-http 80/tcp www www-http # World Wide Web HTTP
-http 80/udp www www-http # HyperText Transfer Protocol
-kerberos 88/tcp kerberos5 krb5 # Kerberos v5
-kerberos 88/udp kerberos5 krb5 # Kerberos v5
-supdup 95/tcp
-supdup 95/udp
-hostname 101/tcp hostnames # usually from sri-nic
-hostname 101/udp hostnames # usually from sri-nic
-iso-tsap 102/tcp tsap # part of ISODE.
-csnet-ns 105/tcp cso # also used by CSO name server
-csnet-ns 105/udp cso
-# unfortunately the poppassd (Eudora) uses a port which has already
-# been assigned to a different service. We list the poppassd as an
-# alias here. This should work for programs asking for this service.
-# (due to a bug in inetd the 3com-tsmux line is disabled)
-#3com-tsmux 106/tcp poppassd
-#3com-tsmux 106/udp poppassd
-rtelnet 107/tcp # Remote Telnet
-rtelnet 107/udp
-pop2 109/tcp pop-2 postoffice # POP version 2
-pop2 109/udp pop-2
-pop3 110/tcp pop-3 # POP version 3
-pop3 110/udp pop-3
-sunrpc 111/tcp portmapper # RPC 4.0 portmapper TCP
-sunrpc 111/udp portmapper # RPC 4.0 portmapper UDP
-auth 113/tcp authentication tap ident
-auth 113/udp authentication tap ident
-sftp 115/tcp
-sftp 115/udp
-uucp-path 117/tcp
-uucp-path 117/udp
-nntp 119/tcp readnews untp # USENET News Transfer Protocol
-nntp 119/udp readnews untp # USENET News Transfer Protocol
-ntp 123/tcp
-ntp 123/udp # Network Time Protocol
-pwdgen 129/tcp # Password Generator Protocol
-pwdgen 129/udp # Password Generator Protocol
-netbios-ns 137/tcp # NETBIOS Name Service
-netbios-ns 137/udp
-netbios-dgm 138/tcp # NETBIOS Datagram Service
-netbios-dgm 138/udp
-netbios-ssn 139/tcp # NETBIOS session service
-netbios-ssn 139/udp
-imap 143/tcp imap2 # Interim Mail Access Proto v2
-imap 143/udp imap2
-snmp 161/tcp # Simple Net Mgmt Proto
-snmp 161/udp # Simple Net Mgmt Proto
-snmptrap 162/udp snmp-trap # Traps for SNMP
-cmip-man 163/tcp # ISO mgmt over IP (CMOT)
-cmip-man 163/udp
-cmip-agent 164/tcp
-cmip-agent 164/udp
-mailq 174/tcp # MAILQ
-mailq 174/udp # MAILQ
-xdmcp 177/tcp # X Display Mgr. Control Proto
-xdmcp 177/udp
-nextstep 178/tcp NeXTStep NextStep # NeXTStep window
-nextstep 178/udp NeXTStep NextStep # server
-bgp 179/tcp # Border Gateway Proto.
-bgp 179/udp
-prospero 191/tcp # Cliff Neuman's Prospero
-prospero 191/udp
-irc 194/tcp # Internet Relay Chat
-irc 194/udp
-smux 199/tcp # SNMP Unix Multiplexer
-smux 199/udp
-at-rtmp 201/tcp # AppleTalk routing
-at-rtmp 201/udp
-at-nbp 202/tcp # AppleTalk name binding
-at-nbp 202/udp
-at-echo 204/tcp # AppleTalk echo
-at-echo 204/udp
-at-zis 206/tcp # AppleTalk zone information
-at-zis 206/udp
-qmtp 209/tcp # Quick Mail Transfer Protocol
-qmtp 209/udp # Quick Mail Transfer Protocol
-z39.50 210/tcp z3950 wais # NISO Z39.50 database
-z39.50 210/udp z3950 wais
-ipx 213/tcp # IPX
-ipx 213/udp
-imap3 220/tcp # Interactive Mail Access
-imap3 220/udp # Protocol v3
-link 245/tcp ttylink
-link 245/ucp ttylink
-fatserv 347/tcp # Fatmen Server
-fatserv 347/udp # Fatmen Server
-rsvp_tunnel 363/tcp
-rsvp_tunnel 363/udp
-rpc2portmap 369/tcp
-rpc2portmap 369/udp # Coda portmapper
-codaauth2 370/tcp
-codaauth2 370/udp # Coda authentication server
-ulistproc 372/tcp ulistserv # UNIX Listserv
-ulistproc 372/udp ulistserv
-ldap 389/tcp
-ldap 389/udp
-svrloc 427/tcp # Server Location Protocl
-svrloc 427/udp # Server Location Protocl
-mobileip-agent 434/tcp
-mobileip-agent 434/udp
-mobilip-mn 435/tcp
-mobilip-mn 435/udp
-https 443/tcp # MCom
-https 443/udp # MCom
-snpp 444/tcp # Simple Network Paging Protocol
-snpp 444/udp # Simple Network Paging Protocol
-microsoft-ds 445/tcp
-microsoft-ds 445/udp
-kpasswd 464/tcp kpwd # Kerberos "passwd"
-kpasswd 464/udp kpwd # Kerberos "passwd"
-photuris 468/tcp
-photuris 468/udp
-saft 487/tcp # Simple Asynchronous File Transfer
-saft 487/udp # Simple Asynchronous File Transfer
-gss-http 488/tcp
-gss-http 488/udp
-pim-rp-disc 496/tcp
-pim-rp-disc 496/udp
-isakmp 500/tcp
-isakmp 500/udp
-gdomap 538/tcp # GNUstep distributed objects
-gdomap 538/udp # GNUstep distributed objects
-iiop 535/tcp
-iiop 535/udp
-dhcpv6-client 546/tcp
-dhcpv6-client 546/udp
-dhcpv6-server 547/tcp
-dhcpv6-server 547/udp
-rtsp 554/tcp # Real Time Stream Control Protocol
-rtsp 554/udp # Real Time Stream Control Protocol
-nntps 563/tcp # NNTP over SSL
-nntps 563/udp # NNTP over SSL
-whoami 565/tcp
-whoami 565/udp
-submission 587/tcp msa # mail message submission
-submission 587/udp msa # mail message submission
-npmp-local 610/tcp dqs313_qmaster # npmp-local / DQS
-npmp-local 610/udp dqs313_qmaster # npmp-local / DQS
-npmp-gui 611/tcp dqs313_execd # npmp-gui / DQS
-npmp-gui 611/udp dqs313_execd # npmp-gui / DQS
-hmmp-ind 612/tcp dqs313_intercell # HMMP Indication / DQS
-hmmp-ind 612/udp dqs313_intercell # HMMP Indication / DQS
-ipp 631/tcp # Internet Printing Protocol
-ipp 631/ucp # Internet Printing Protocol
-ldaps 636/tcp # LDAP over SSL
-ldaps 636/udp # LDAP over SSL
-acap 674/tcp
-acap 674/udp
-ha-cluster 694/tcp # Heartbeat HA-cluster
-ha-cluster 694/udp # Heartbeat HA-cluster
-kerberos-adm 749/tcp # Kerberos `kadmin' (v5)
-kerberos-iv 750/udp kerberos4 kerberos-sec kdc
-kerberos-iv 750/tcp kerberos4 kerberos-sec kdc
-webster 765/tcp # Network dictionary
-webster 765/udp
-phonebook 767/tcp # Network phonebook
-phonebook 767/udp
-rsync 873/tcp # rsync
-rsync 873/udp # rsync
-telnets 992/tcp
-telnets 992/udp
-imaps 993/tcp # IMAP over SSL
-imaps 993/udp # IMAP over SSL
-ircs 994/tcp
-ircs 994/udp
-pop3s 995/tcp # POP-3 over SSL
-pop3s 995/udp # POP-3 over SSL
-
-#
-# UNIX specific services
-#
-exec 512/tcp
-biff 512/udp comsat
-login 513/tcp
-who 513/udp whod
-shell 514/tcp cmd # no passwords used
-syslog 514/udp
-printer 515/tcp spooler # line printer spooler
-printer 515/udp spooler # line printer spooler
-talk 517/udp
-ntalk 518/udp
-utime 519/tcp unixtime
-utime 519/udp unixtime
-efs 520/tcp
-router 520/udp route routed # RIP
-ripng 521/tcp
-ripng 521/udp
-timed 525/tcp timeserver
-timed 525/udp timeserver
-tempo 526/tcp newdate
-courier 530/tcp rpc
-conference 531/tcp chat
-netnews 532/tcp
-netwall 533/udp # -for emergency broadcasts
-uucp 540/tcp uucpd # uucp daemon
-klogin 543/tcp # Kerberized `rlogin' (v5)
-kshell 544/tcp krcmd # Kerberized `rsh' (v5)
-afpovertcp 548/tcp # AFP over TCP
-afpovertcp 548/udp # AFP over TCP
-remotefs 556/tcp rfs_server rfs # Brunhoff remote filesystem
-
-#
-# From ``PORT NUMBERS'':
-#
-#>REGISTERED PORT NUMBERS
-#>
-#>The Registered Ports are listed by the IANA and on most systems can be
-#>used by ordinary user processes or programs executed by ordinary
-#>users.
-#>
-#>Ports are used in the TCP [RFC793] to name the ends of logical
-#>connections which carry long term conversations. For the purpose of
-#>providing services to unknown callers, a service contact port is
-#>defined. This list specifies the port used by the server process as
-#>its contact port.
-#>
-#>The IANA registers uses of these ports as a convienence to the
-#>community.
-#
-socks 1080/tcp # socks proxy server
-socks 1080/udp # socks proxy server
-h323hostcallsc 1300/tcp # H323 Host Call Secure
-h323hostcallsc 1300/udp # H323 Host Call Secure
-ms-sql-s 1433/tcp # Microsoft-SQL-Server
-ms-sql-s 1433/udp # Microsoft-SQL-Server
-ms-sql-m 1434/tcp # Microsoft-SQL-Monitor
-ms-sql-m 1434/udp # Microsoft-SQL-Monitor
-ica 1494/tcp # Citrix ICA Client
-ica 1494/udp # Citrix ICA Client
-wins 1512/tcp # Microsoft's Windows Internet Name Service
-wins 1512/udp # Microsoft's Windows Internet Name Service
-ingreslock 1524/tcp
-ingreslock 1524/udp
-prospero-np 1525/tcp # Prospero non-privileged
-prospero-np 1525/udp
-datametrics 1645/tcp old-radius # datametrics / old radius entry
-datametrics 1645/udp old-radius # datametrics / old radius entry
-sa-msg-port 1646/tcp old-radacct # sa-msg-port / old radacct entry
-sa-msg-port 1646/udp old-radacct # sa-msg-port / old radacct entry
-kermit 1649/tcp
-kermit 1649/udp
-l2tp 1701/tcp l2f
-l2tp 1701/udp l2f
-h323gatedisc 1718/tcp
-h323gatedisc 1718/udp
-h323gatestat 1719/tcp
-h323gatestat 1719/udp
-h323hostcall 1720/tcp
-h323hostcall 1720/udp
-tftp-mcast 1758/tcp
-tftp-mcast 1758/udp
-hello 1789/tcp
-hello 1789/udp
-radius 1812/tcp # Radius
-radius 1812/udp # Radius
-radius-acct 1813/tcp radacct # Radius Accounting
-radius-acct 1813/udp radacct # Radius Accounting
-mtp 1911/tcp #
-mtp 1911/udp #
-hsrp 1985/tcp # Cisco Hot Standby Router Protocol
-hsrp 1985/udp # Cisco Hot Standby Router Protocol
-licensedaemon 1986/tcp
-licensedaemon 1986/udp
-gdp-port 1997/tcp # Cisco Gateway Discovery Protocol
-gdp-port 1997/udp # Cisco Gateway Discovery Protocol
-nfs 2049/tcp nfsd
-nfs 2049/udp nfsd
-zephyr-srv 2102/tcp # Zephyr server
-zephyr-srv 2102/udp # Zephyr server
-zephyr-clt 2103/tcp # Zephyr serv-hm connection
-zephyr-clt 2103/udp # Zephyr serv-hm connection
-zephyr-hm 2104/tcp # Zephyr hostmanager
-zephyr-hm 2104/udp # Zephyr hostmanager
-cvspserver 2401/tcp # CVS client/server operations
-cvspserver 2401/udp # CVS client/server operations
-venus 2430/tcp # codacon port
-venus 2430/udp # Venus callback/wbc interface
-venus-se 2431/tcp # tcp side effects
-venus-se 2431/udp # udp sftp side effect
-codasrv 2432/tcp # not used
-codasrv 2432/udp # server port
-codasrv-se 2433/tcp # tcp side effects
-codasrv-se 2433/udp # udp sftp side effectQ
-
-# Ports numbered 2600 through 2606 are used by the zebra package. The primary
-# names are the registered names, and the zebra names are listed as aliases.
-hpstgmgr 2600/tcp zebrasrv # HPSTGMGR
-hpstgmgr 2600/udp # HPSTGMGR
-discp-client 2601/tcp zebra # discp client
-discp-client 2601/udp # discp client
-discp-server 2602/tcp ripd # discp server
-discp-server 2602/udp # discp server
-servicemeter 2603/tcp ripngd # Service Meter
-servicemeter 2603/udp # Service Meter
-nsc-ccs 2604/tcp ospfd # NSC CCS
-nsc-ccs 2604/udp # NSC CCS
-nsc-posa 2605/tcp bgpd # NSC POSA
-nsc-posa 2605/udp # NSC POSA
-netmon 2606/tcp ospf6d # Dell Netmon
-netmon 2606/udp # Dell Netmon
-
-corbaloc 2809/tcp # CORBA naming service locator
-icpv2 3130/tcp # Internet Cache Protocol V2 (Squid)
-icpv2 3130/udp # Internet Cache Protocol V2 (Squid)
-mysql 3306/tcp # MySQL
-mysql 3306/udp # MySQL
-trnsprntproxy 3346/tcp # Trnsprnt Proxy
-trnsprntproxy 3346/udp # Trnsprnt Proxy
-rwhois 4321/tcp # Remote Who Is
-rwhois 4321/udp # Remote Who Is
-krb524 4444/tcp # Kerberos 5 to 4 ticket xlator
-krb524 4444/udp # Kerberos 5 to 4 ticket xlator
-rfe 5002/tcp # Radio Free Ethernet
-rfe 5002/udp # Actually uses UDP only
-jabber-client 5222/tcp # Jabber Client Connection
-jabber-client 5222/udp # Jabber Client Connection
-jabber-server 5269/tcp # Jabber Server Connection
-jabber-server 5269/udp # Jabber Server Connection
-cfengine 5308/tcp # CFengine
-cfengine 5308/udp # CFengine
-cvsup 5999/tcp CVSup # CVSup file transfer/John Polstra/FreeBSD
-cvsup 5999/udp CVSup # CVSup file transfer/John Polstra/FreeBSD
-x11 6000/tcp X # the X Window System
-afs3-fileserver 7000/tcp # file server itself
-afs3-fileserver 7000/udp # file server itself
-afs3-callback 7001/tcp # callbacks to cache managers
-afs3-callback 7001/udp # callbacks to cache managers
-afs3-prserver 7002/tcp # users & groups database
-afs3-prserver 7002/udp # users & groups database
-afs3-vlserver 7003/tcp # volume location database
-afs3-vlserver 7003/udp # volume location database
-afs3-kaserver 7004/tcp # AFS/Kerberos authentication service
-afs3-kaserver 7004/udp # AFS/Kerberos authentication service
-afs3-volser 7005/tcp # volume managment server
-afs3-volser 7005/udp # volume managment server
-afs3-errors 7006/tcp # error interpretation service
-afs3-errors 7006/udp # error interpretation service
-afs3-bos 7007/tcp # basic overseer process
-afs3-bos 7007/udp # basic overseer process
-afs3-update 7008/tcp # server-to-server updater
-afs3-update 7008/udp # server-to-server updater
-afs3-rmtsys 7009/tcp # remote cache manager service
-afs3-rmtsys 7009/udp # remote cache manager service
-sd 9876/tcp # Session Director
-sd 9876/udp # Session Director
-amanda 10080/tcp # amanda backup services
-amanda 10080/udp # amanda backup services
-pgpkeyserver 11371/tcp # PGP/GPG public keyserver
-pgpkeyserver 11371/udp # PGP/GPG public keyserver
-h323callsigalt 11720/tcp # H323 Call Signal Alternate
-h323callsigalt 11720/udp # H323 Call Signal Alternate
-
-# This port is registered as wnn6, but also used under the name "wnn4" by the
-# FreeWnn package.
-wnn6 22273/tcp wnn4
-wnn6 22273/ucp wnn4
-
-quake 26000/tcp
-quake 26000/udp
-wnn6-ds 26208/tcp
-wnn6-ds 26208/udp
-traceroute 33434/tcp
-traceroute 33434/udp
-
-#
-# Datagram Delivery Protocol services
-#
-rtmp 1/ddp # Routing Table Maintenance Protocol
-nbp 2/ddp # Name Binding Protocol
-echo 4/ddp # AppleTalk Echo Protocol
-zip 6/ddp # Zone Information Protocol
-
-#
-# Kerberos (Project Athena/MIT) services
-# Note that these are for Kerberos v4, and are unofficial. Sites running
-# v4 should uncomment these and comment out the v5 entries above.
-#
-kerberos_master 751/udp # Kerberos authentication
-kerberos_master 751/tcp # Kerberos authentication
-passwd_server 752/udp # Kerberos passwd server
-krbupdate 760/tcp kreg # Kerberos registration
-kpop 1109/tcp # Pop with Kerberos
-knetd 2053/tcp # Kerberos de-multiplexor
-
-#
-# Kerberos 5 services, also not registered with IANA
-#
-krb5_prop 754/tcp # Kerberos slave propagation
-eklogin 2105/tcp # Kerberos encrypted rlogin
-
-#
-# Unregistered but necessary (for NetBSD) services
-#
-supfilesrv 871/tcp # SUP server
-supfiledbg 1127/tcp # SUP debugging
-
-#
-# Unregistered but useful/necessary other services
-#
-netstat 15/tcp # (was once asssigned, no more)
-linuxconf 98/tcp # Linuxconf HTML access
-poppassd 106/tcp # Eudora
-poppassd 106/udp # Eudora
-smtps 465/tcp # SMTP over SSL (TLS)
-gii 616/tcp # gated interactive interface
-omirr 808/tcp omirrd # online mirror
-omirr 808/udp omirrd # online mirror
-swat 901/tcp # Samba Web Administration Tool
-rndc 953/tcp # rndc control sockets (BIND 9)
-rndc 953/udp # rndc control sockets (BIND 9)
-skkserv 1178/tcp # SKK Japanese input method
-rmtcfg 1236/tcp # Gracilis Packeten remote config server
-xtel 1313/tcp # french minitel
-lotusnote 1352/tcp lotusnotes # Lotus notes
-lotusnote 1352/udp lotusnotes # Lotus notes
-support 1529/tcp prmsd gnatsd # GNATS, cygnus bug tracker
-cfinger 2003/tcp # GNU Finger
-ninstall 2150/tcp # ninstall service
-ninstall 2150/udp # ninstall service
-afbackup 2988/tcp # Afbackup system
-afbackup 2988/udp # Afbackup system
-squid 3128/tcp # squid web proxy
-prsvp 3455/tcp # RSVP Port
-prsvp 3455/udp # RSVP Port
-postgres 5432/tcp # POSTGRES
-postgres 5432/udp # POSTGRES
-fax 4557/tcp # FAX transmission service (old)
-hylafax 4559/tcp # HylaFAX client-server protocol (new)
-sgi-dgl 5232/tcp # SGI Distributed Graphics
-sgi-dgl 5232/udp
-noclog 5354/tcp # noclogd with TCP (nocol)
-noclog 5354/udp # noclogd with UDP (nocol)
-hostmon 5355/tcp # hostmon uses TCP (nocol)
-hostmon 5355/udp # hostmon uses TCP (nocol)
-canna 5680/tcp
-x11-ssh-offset 6010/tcp # SSH X11 forwarding offset
-ircd 6667/tcp # Internet Relay Chat
-ircd 6667/udp # Internet Relay Chat
-xfs 7100/tcp # X font server
-tircproxy 7666/tcp # Tircproxy
-http-alt 8008/tcp
-http-alt 8008/udp
-webcache 8080/tcp # WWW caching service
-webcache 8080/udp # WWW caching service
-tproxy 8081/tcp # Transparent Proxy
-tproxy 8081/udp # Transparent Proxy
-jetdirect 9100/tcp laserjet hplj #
-mandelspawn 9359/udp mandelbrot # network mandelbrot
-kamanda 10081/tcp # amanda backup services (Kerberos)
-kamanda 10081/udp # amanda backup services (Kerberos)
-amandaidx 10082/tcp # amanda backup services
-amidxtape 10083/tcp # amanda backup services
-ladcca 14541/tcp # LADCCA client/server protocol
-isdnlog 20011/tcp # isdn logging system
-isdnlog 20011/udp # isdn logging system
-vboxd 20012/tcp # voice box system
-vboxd 20012/udp # voice box system
-wnn4_Kr 22305/tcp # used by the kWnn package
-wnn4_Cn 22289/tcp # used by the cWnn package
-wnn4_Tw 22321/tcp # used by the tWnn package
-binkp 24554/tcp # Binkley
-binkp 24554/udp # Binkley
-asp 27374/tcp # Address Search Protocol
-asp 27374/udp # Address Search Protocol
-tfido 60177/tcp # Ifmail
-tfido 60177/udp # Ifmail
-fido 60179/tcp # Ifmail
-fido 60179/udp # Ifmail
-
-# Cyrus SIEVE service
-sieve 2000/tcp
-sieve 2000/udp
diff --git a/contrib/altlinux/etc/squid/squid.conf b/contrib/altlinux/etc/squid/squid.conf
+++ /dev/null
@@ -1,3303 +0,0 @@
-
-# WELCOME TO SQUID 2
-# ------------------
-#
-# This is the default Squid configuration file. You may wish
-# to look at the Squid home page (http://www.squid-cache.org/)
-# for the FAQ and other documentation.
-#
-# The default Squid config file shows what the defaults for
-# various options happen to be. If you don't need to change the
-# default, you shouldn't uncomment the line. Doing so may cause
-# run-time problems. In some cases "none" refers to no default
-# setting at all, while in other cases it refers to a valid
-# option - the comments for that keyword indicate if this is the
-# case.
-#
-
-
-# NETWORK OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: http_port
-# Usage: port
-# hostname:port
-# 1.2.3.4:port
-#
-# The socket addresses where Squid will listen for HTTP client
-# requests. You may specify multiple socket addresses.
-# There are three forms: port alone, hostname with port, and
-# IP address with port. If you specify a hostname or IP
-# address, then Squid binds the socket to that specific
-# address. This replaces the old 'tcp_incoming_address'
-# option. Most likely, you do not need to bind to a specific
-# address, so you can use the port number alone.
-#
-# The default port number is 3128.
-#
-# If you are running Squid in accelerator mode, then you
-# probably want to listen on port 80 also, or instead.
-#
-# The -a command line option will override the *first* port
-# number listed here. That option will NOT override an IP
-# address, however.
-#
-# You may specify multiple socket addresses on multiple lines.
-#
-# If you run Squid on a dual-homed machine with an internal
-# and an external interface then we recommend you to specify the
-# internal address:port in http_port. This way Squid will only be
-# visible on the internal address.
-#
-#Default:
-# http_port 3128
-
-# TAG: https_port
-# Usage: [ip:]port cert=certificate.pem [key=key.pem] [options...]
-#
-# The socket address where Squid will listen for HTTPS client
-# requests.
-#
-# This is really only useful for situations where you are running
-# squid in accelerator mode and you want to do the SSL work at the
-# accelerator level.
-#
-# You may specify multiple socket addresses on multiple lines,
-# each with their own SSL certificate and/or options.
-#
-# Options:
-#
-# cert= Path to SSL certificate (PEM format)
-#
-# key= Path to SSL private key file (PEM format)
-# if not specified, the certificate file is
-# assumed to be a combined certificate and
-# key file
-#
-# version= The version of SSL/TLS supported
-# 1 automatic (default)
-# 2 SSLv2 only
-# 3 SSLv3 only
-# 4 TLSv1 only
-#
-# cipher= Colon separated list of supported ciphers
-#
-# options= Varions SSL engine options. The most important
-# being:
-# NO_SSLv2 Disallow the use of SSLv2
-# NO_SSLv3 Disallow the use of SSLv3
-# NO_TLSv1 Disallow the use of TLSv1
-# See src/ssl_support.c or OpenSSL documentation
-# for a more complete list.
-#
-#Default:
-# none
-
-# TAG: ssl_unclean_shutdown
-# Some browsers (especially MSIE) bugs out on SSL shutdown
-# messages.
-#
-#Default:
-# ssl_unclean_shutdown off
-
-# TAG: icp_port
-# The port number where Squid sends and receives ICP queries to
-# and from neighbor caches. Default is 3130. To disable use
-# "0". May be overridden with -u on the command line.
-#
-#Default:
-# icp_port 3130
-
-# TAG: htcp_port
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-htcp option
-#
-# The port number where Squid sends and receives HTCP queries to
-# and from neighbor caches. Default is 4827. To disable use
-# "0".
-#
-#Default:
-# htcp_port 4827
-
-# TAG: mcast_groups
-# This tag specifies a list of multicast groups which your server
-# should join to receive multicasted ICP queries.
-#
-# NOTE! Be very careful what you put here! Be sure you
-# understand the difference between an ICP _query_ and an ICP
-# _reply_. This option is to be set only if you want to RECEIVE
-# multicast queries. Do NOT set this option to SEND multicast
-# ICP (use cache_peer for that). ICP replies are always sent via
-# unicast, so this option does not affect whether or not you will
-# receive replies from multicast group members.
-#
-# You must be very careful to NOT use a multicast address which
-# is already in use by another group of caches.
-#
-# If you are unsure about multicast, please read the Multicast
-# chapter in the Squid FAQ (http://www.squid-cache.org/FAQ/).
-#
-# Usage: mcast_groups 239.128.16.128 224.0.1.20
-#
-# By default, Squid doesn't listen on any multicast groups.
-#
-#Default:
-# none
-
-# TAG: udp_incoming_address
-# TAG: udp_outgoing_address
-# udp_incoming_address is used for the ICP socket receiving packets
-# from other caches.
-# udp_outgoing_address is used for ICP packets sent out to other
-# caches.
-#
-# The default behavior is to not bind to any specific address.
-#
-# A udp_incoming_address value of 0.0.0.0 indicates that Squid should
-# listen for UDP messages on all available interfaces.
-#
-# If udp_outgoing_address is set to 255.255.255.255 (the default)
-# then it will use the same socket as udp_incoming_address. Only
-# change this if you want to have ICP queries sent using another
-# address than where this Squid listens for ICP queries from other
-# caches.
-#
-# NOTE, udp_incoming_address and udp_outgoing_address can not
-# have the same value since they both use port 3130.
-#
-#Default:
-# udp_incoming_address 0.0.0.0
-# udp_outgoing_address 255.255.255.255
-
-
-# OPTIONS WHICH AFFECT THE NEIGHBOR SELECTION ALGORITHM
-# -----------------------------------------------------------------------------
-
-# TAG: cache_peer
-# To specify other caches in a hierarchy, use the format:
-#
-# cache_peer hostname type http_port icp_port
-#
-# For example,
-#
-# # proxy icp
-# # hostname type port port options
-# # -------------------- -------- ----- ----- -----------
-# cache_peer parent.foo.net parent 3128 3130 [proxy-only]
-# cache_peer sib1.foo.net sibling 3128 3130 [proxy-only]
-# cache_peer sib2.foo.net sibling 3128 3130 [proxy-only]
-#
-# type: either 'parent', 'sibling', or 'multicast'.
-#
-# proxy_port: The port number where the cache listens for proxy
-# requests.
-#
-# icp_port: Used for querying neighbor caches about
-# objects. To have a non-ICP neighbor
-# specify '7' for the ICP port and make sure the
-# neighbor machine has the UDP echo port
-# enabled in its /etc/inetd.conf file.
-#
-# options: proxy-only
-# weight=n
-# ttl=n
-# no-query
-# default
-# round-robin
-# multicast-responder
-# closest-only
-# no-digest
-# no-netdb-exchange
-# no-delay
-# login=user:password | PASS | *:password
-# connect-timeout=nn
-# digest-url=url
-# allow-miss
-# max-conn
-# htcp
-# carp-load-factor
-#
-# use 'proxy-only' to specify that objects fetched
-# from this cache should not be saved locally.
-#
-# use 'weight=n' to specify a weighted parent.
-# The weight must be an integer. The default weight
-# is 1, larger weights are favored more.
-#
-# use 'ttl=n' to specify a IP multicast TTL to use
-# when sending an ICP queries to this address.
-# Only useful when sending to a multicast group.
-# Because we don't accept ICP replies from random
-# hosts, you must configure other group members as
-# peers with the 'multicast-responder' option below.
-#
-# use 'no-query' to NOT send ICP queries to this
-# neighbor.
-#
-# use 'default' if this is a parent cache which can
-# be used as a "last-resort." You should probably
-# only use 'default' in situations where you cannot
-# use ICP with your parent cache(s).
-#
-# use 'round-robin' to define a set of parents which
-# should be used in a round-robin fashion in the
-# absence of any ICP queries.
-#
-# 'multicast-responder' indicates that the named peer
-# is a member of a multicast group. ICP queries will
-# not be sent directly to the peer, but ICP replies
-# will be accepted from it.
-#
-# 'closest-only' indicates that, for ICP_OP_MISS
-# replies, we'll only forward CLOSEST_PARENT_MISSes
-# and never FIRST_PARENT_MISSes.
-#
-# use 'no-digest' to NOT request cache digests from
-# this neighbor.
-#
-# 'no-netdb-exchange' disables requesting ICMP
-# RTT database (NetDB) from the neighbor.
-#
-# use 'no-delay' to prevent access to this neighbor
-# from influencing the delay pools.
-#
-# use 'login=user:password' if this is a personal/workgroup
-# proxy and your parent requires proxy authentication.
-# Note: The string can include URL escapes (i.e. %20 for
-# spaces). This also means that % must be written as %%.
-#
-# use 'login=PASS' if users must authenticate against
-# the upstream proxy. This will pass the users credentials
-# as they are to the peer proxy. This only works for the
-# Basic HTTP authentication sheme. Note: To combine this
-# with proxy_auth both proxies must share the same user
-# database as HTTP only allows for one proxy login.
-# Also be warned that this will expose your users proxy
-# password to the peer. USE WITH CAUTION
-#
-# use 'login=*:password' to pass the username to the
-# upstream cache, but with a fixed password. This is meant
-# to be used when the peer is in another administrative
-# domain, but it is still needed to identify each user.
-# The star can optionally be followed by some extra
-# information which is added to the username. This can
-# be used to identify this proxy to the peer, similar to
-# the login=username:password option above.
-#
-# use 'connect-timeout=nn' to specify a peer
-# specific connect timeout (also see the
-# peer_connect_timeout directive)
-#
-# use 'digest-url=url' to tell Squid to fetch the cache
-# digest (if digests are enabled) for this host from
-# the specified URL rather than the Squid default
-# location.
-#
-# use 'allow-miss' to disable Squid's use of only-if-cached
-# when forwarding requests to siblings. This is primarily
-# useful when icp_hit_stale is used by the sibling. To
-# extensive use of this option may result in forwarding
-# loops, and you should avoid having two-way peerings
-# with this option. (for example to deny peer usage on
-# requests from peer by denying cache_peer_access if the
-# source is a peer)
-#
-# use 'max-conn' to limit the amount of connections Squid
-# may open to this peer.
-#
-# use 'htcp' to send HTCP, instead of ICP, queries
-# to the neighbor. You probably also want to
-# set the "icp port" to 4827 instead of 3130.
-#
-# use 'carp-load-factor=f' to define a parent
-# cache as one participating in a CARP array.
-# The 'f' values for all CARP parents must add
-# up to 1.0.
-#
-#
-# NOTE: non-ICP/HTCP neighbors must be specified as 'parent'.
-#
-#Default:
-# none
-
-# TAG: cache_peer_domain
-# Use to limit the domains for which a neighbor cache will be
-# queried. Usage:
-#
-# cache_peer_domain cache-host domain [domain ...]
-# cache_peer_domain cache-host !domain
-#
-# For example, specifying
-#
-# cache_peer_domain parent.foo.net .edu
-#
-# has the effect such that UDP query packets are sent to
-# 'bigserver' only when the requested object exists on a
-# server in the .edu domain. Prefixing the domainname
-# with '!' means that the cache will be queried for objects
-# NOT in that domain.
-#
-# NOTE: * Any number of domains may be given for a cache-host,
-# either on the same or separate lines.
-# * When multiple domains are given for a particular
-# cache-host, the first matched domain is applied.
-# * Cache hosts with no domain restrictions are queried
-# for all requests.
-# * There are no defaults.
-# * There is also a 'cache_peer_access' tag in the ACL
-# section.
-#
-#Default:
-# none
-
-# TAG: neighbor_type_domain
-# usage: neighbor_type_domain neighbor parent|sibling domain domain ...
-#
-# Modifying the neighbor type for specific domains is now
-# possible. You can treat some domains differently than the the
-# default neighbor type specified on the 'cache_peer' line.
-# Normally it should only be necessary to list domains which
-# should be treated differently because the default neighbor type
-# applies for hostnames which do not match domains listed here.
-#
-#EXAMPLE:
-# cache_peer parent cache.foo.org 3128 3130
-# neighbor_type_domain cache.foo.org sibling .com .net
-# neighbor_type_domain cache.foo.org sibling .au .de
-#
-#Default:
-# none
-
-# TAG: icp_query_timeout (msec)
-# Normally Squid will automatically determine an optimal ICP
-# query timeout value based on the round-trip-time of recent ICP
-# queries. If you want to override the value determined by
-# Squid, set this 'icp_query_timeout' to a non-zero value. This
-# value is specified in MILLISECONDS, so, to use a 2-second
-# timeout (the old default), you would write:
-#
-# icp_query_timeout 2000
-#
-#Default:
-# icp_query_timeout 0
-
-# TAG: maximum_icp_query_timeout (msec)
-# Normally the ICP query timeout is determined dynamically. But
-# sometimes it can lead to very large values (say 5 seconds).
-# Use this option to put an upper limit on the dynamic timeout
-# value. Do NOT use this option to always use a fixed (instead
-# of a dynamic) timeout value. To set a fixed timeout see the
-# 'icp_query_timeout' directive.
-#
-#Default:
-# maximum_icp_query_timeout 2000
-
-# TAG: mcast_icp_query_timeout (msec)
-# For Multicast peers, Squid regularly sends out ICP "probes" to
-# count how many other peers are listening on the given multicast
-# address. This value specifies how long Squid should wait to
-# count all the replies. The default is 2000 msec, or 2
-# seconds.
-#
-#Default:
-# mcast_icp_query_timeout 2000
-
-# TAG: dead_peer_timeout (seconds)
-# This controls how long Squid waits to declare a peer cache
-# as "dead." If there are no ICP replies received in this
-# amount of time, Squid will declare the peer dead and not
-# expect to receive any further ICP replies. However, it
-# continues to send ICP queries, and will mark the peer as
-# alive upon receipt of the first subsequent ICP reply.
-#
-# This timeout also affects when Squid expects to receive ICP
-# replies from peers. If more than 'dead_peer' seconds have
-# passed since the last ICP reply was received, Squid will not
-# expect to receive an ICP reply on the next query. Thus, if
-# your time between requests is greater than this timeout, you
-# will see a lot of requests sent DIRECT to origin servers
-# instead of to your parents.
-#
-#Default:
-# dead_peer_timeout 10 seconds
-
-# TAG: hierarchy_stoplist
-# A list of words which, if found in a URL, cause the object to
-# be handled directly by this cache. In other words, use this
-# to not query neighbor caches for certain objects. You may
-# list this option multiple times.
-#We recommend you to use at least the following line.
-hierarchy_stoplist cgi-bin ?
-
-# TAG: no_cache
-# A list of ACL elements which, if matched, cause the request to
-# not be satisfied from the cache and the reply to not be cached.
-# In other words, use this to force certain objects to never be cached.
-#
-# You must use the word 'DENY' to indicate the ACL names which should
-# NOT be cached.
-#
-#We recommend you to use the following two lines.
-acl QUERY urlpath_regex cgi-bin \?
-no_cache deny QUERY
-
-
-# OPTIONS WHICH AFFECT THE CACHE SIZE
-# -----------------------------------------------------------------------------
-
-# TAG: cache_mem (bytes)
-# NOTE: THIS PARAMETER DOES NOT SPECIFY THE MAXIMUM PROCESS SIZE.
-# IT ONLY PLACES A LIMIT ON HOW MUCH ADDITIONAL MEMORY SQUID WILL
-# USE AS A MEMORY CACHE OF OBJECTS. SQUID USES MEMORY FOR OTHER
-# THINGS AS WELL. SEE THE SQUID FAQ SECTION 8 FOR DETAILS.
-#
-# 'cache_mem' specifies the ideal amount of memory to be used
-# for:
-# * In-Transit objects
-# * Hot Objects
-# * Negative-Cached objects
-#
-# Data for these objects are stored in 4 KB blocks. This
-# parameter specifies the ideal upper limit on the total size of
-# 4 KB blocks allocated. In-Transit objects take the highest
-# priority.
-#
-# In-transit objects have priority over the others. When
-# additional space is needed for incoming data, negative-cached
-# and hot objects will be released. In other words, the
-# negative-cached and hot objects will fill up any unused space
-# not needed for in-transit objects.
-#
-# If circumstances require, this limit will be exceeded.
-# Specifically, if your incoming request rate requires more than
-# 'cache_mem' of memory to hold in-transit objects, Squid will
-# exceed this limit to satisfy the new requests. When the load
-# decreases, blocks will be freed until the high-water mark is
-# reached. Thereafter, blocks will be used to store hot
-# objects.
-#
-#Default:
-# cache_mem 8 MB
-
-# TAG: cache_swap_low (percent, 0-100)
-# TAG: cache_swap_high (percent, 0-100)
-#
-# The low- and high-water marks for cache object replacement.
-# Replacement begins when the swap (disk) usage is above the
-# low-water mark and attempts to maintain utilization near the
-# low-water mark. As swap utilization gets close to high-water
-# mark object eviction becomes more aggressive. If utilization is
-# close to the low-water mark less replacement is done each time.
-#
-# Defaults are 90% and 95%. If you have a large cache, 5% could be
-# hundreds of MB. If this is the case you may wish to set these
-# numbers closer together.
-#
-#Default:
-# cache_swap_low 90
-# cache_swap_high 95
-
-# TAG: maximum_object_size (bytes)
-# Objects larger than this size will NOT be saved on disk. The
-# value is specified in kilobytes, and the default is 4MB. If
-# you wish to get a high BYTES hit ratio, you should probably
-# increase this (one 32 MB object hit counts for 3200 10KB
-# hits). If you wish to increase speed more than your want to
-# save bandwidth you should leave this low.
-#
-# NOTE: if using the LFUDA replacement policy you should increase
-# this value to maximize the byte hit rate improvement of LFUDA!
-# See replacement_policy below for a discussion of this policy.
-#
-#Default:
-# maximum_object_size 4096 KB
-
-# TAG: minimum_object_size (bytes)
-# Objects smaller than this size will NOT be saved on disk. The
-# value is specified in kilobytes, and the default is 0 KB, which
-# means there is no minimum.
-#
-#Default:
-# minimum_object_size 0 KB
-
-# TAG: maximum_object_size_in_memory (bytes)
-# Objects greater than this size will not be attempted to kept in
-# the memory cache. This should be set high enough to keep objects
-# accessed frequently in memory to improve performance whilst low
-# enough to keep larger objects from hoarding cache_mem .
-#
-#Default:
-# maximum_object_size_in_memory 8 KB
-
-# TAG: ipcache_size (number of entries)
-# TAG: ipcache_low (percent)
-# TAG: ipcache_high (percent)
-# The size, low-, and high-water marks for the IP cache.
-#
-#Default:
-# ipcache_size 1024
-# ipcache_low 90
-# ipcache_high 95
-
-# TAG: fqdncache_size (number of entries)
-# Maximum number of FQDN cache entries.
-#
-#Default:
-# fqdncache_size 1024
-
-# TAG: cache_replacement_policy
-# The cache replacement policy parameter determines which
-# objects are evicted (replaced) when disk space is needed.
-#
-# lru : Squid's original list based LRU policy
-# heap GDSF : Greedy-Dual Size Frequency
-# heap LFUDA: Least Frequently Used with Dynamic Aging
-# heap LRU : LRU policy implemented using a heap
-#
-# Applies to any cache_dir lines listed below this.
-#
-# The LRU policies keeps recently referenced objects.
-#
-# The heap GDSF policy optimizes object hit rate by keeping smaller
-# popular objects in cache so it has a better chance of getting a
-# hit. It achieves a lower byte hit rate than LFUDA though since
-# it evicts larger (possibly popular) objects.
-#
-# The heap LFUDA policy keeps popular objects in cache regardless of
-# their size and thus optimizes byte hit rate at the expense of
-# hit rate since one large, popular object will prevent many
-# smaller, slightly less popular objects from being cached.
-#
-# Both policies utilize a dynamic aging mechanism that prevents
-# cache pollution that can otherwise occur with frequency-based
-# replacement policies.
-#
-# NOTE: if using the LFUDA replacement policy you should increase
-# the value of maximum_object_size above its default of 4096 KB to
-# to maximize the potential byte hit rate improvement of LFUDA.
-#
-# For more information about the GDSF and LFUDA cache replacement
-# policies see http://www.hpl.hp.com/techreports/1999/HPL-1999-69.html
-# and http://fog.hpl.external.hp.com/techreports/98/HPL-98-173.html.
-#
-#Default:
-# cache_replacement_policy lru
-
-# TAG: memory_replacement_policy
-# The memory replacement policy parameter determines which
-# objects are purged from memory when memory space is needed.
-#
-# See cache_replacement_policy for details.
-#
-#Default:
-# memory_replacement_policy lru
-
-
-# LOGFILE PATHNAMES AND CACHE DIRECTORIES
-# -----------------------------------------------------------------------------
-
-# TAG: cache_dir
-# Usage:
-#
-# cache_dir Type Directory-Name Fs-specific-data [options]
-#
-# You can specify multiple cache_dir lines to spread the
-# cache among different disk partitions.
-#
-# Type specifies the kind of storage system to use. Only "ufs"
-# is built by default. To eanble any of the other storage systems
-# see the --enable-storeio configure option.
-#
-# 'Directory' is a top-level directory where cache swap
-# files will be stored. If you want to use an entire disk
-# for caching, then this can be the mount-point directory.
-# The directory must exist and be writable by the Squid
-# process. Squid will NOT create this directory for you.
-#
-# The ufs store type:
-#
-# "ufs" is the old well-known Squid storage format that has always
-# been there.
-#
-# cache_dir ufs Directory-Name Mbytes L1 L2 [options]
-#
-# 'Mbytes' is the amount of disk space (MB) to use under this
-# directory. The default is 100 MB. Change this to suit your
-# configuration. Do NOT put the size of your disk drive here.
-# Instead, if you want Squid to use the entire disk drive,
-# subtract 20% and use that value.
-#
-# 'Level-1' is the number of first-level subdirectories which
-# will be created under the 'Directory'. The default is 16.
-#
-# 'Level-2' is the number of second-level subdirectories which
-# will be created under each first-level directory. The default
-# is 256.
-#
-# The aufs store type:
-#
-# "aufs" uses the same storage format as "ufs", utilizing
-# POSIX-threads to avoid blocking the main Squid process on
-# disk-I/O. This was formerly known in Squid as async-io.
-#
-# cache_dir aufs Directory-Name Mbytes L1 L2 [options]
-#
-# see argument descriptions under ufs above
-#
-# The diskd store type:
-#
-# "diskd" uses the same storage format as "ufs", utilizing a
-# separate process to avoid blocking the main Squid process on
-# disk-I/O.
-#
-# cache_dir diskd Directory-Name Mbytes L1 L2 [options] [Q1=n] [Q2=n]
-#
-# see argument descriptions under ufs above
-#
-# Q1 specifies the number of unacknowledged I/O requests when Squid
-# stops opening new files. If this many messages are in the queues,
-# Squid won't open new files. Default is 64
-#
-# Q2 specifies the number of unacknowledged messages when Squid
-# starts blocking. If this many messages are in the queues,
-# Squid blocks until it recevies some replies. Default is 72
-#
-# The coss store type:
-#
-# block-size=n defines the "block size" for COSS cache_dir's.
-# Squid uses file numbers as block numbers. Since file numbers
-# are limited to 24 bits, the block size determines the maximum
-# size of the COSS partition. The default is 512 bytes, which
-# leads to a maximum cache_dir size of 512<<24, or 8 GB. Note
-# that you should not change the coss block size after Squid
-# has written some objects to the cache_dir.
-#
-# Common options:
-#
-# read-only, this cache_dir is read only.
-#
-# max-size=n, refers to the max object size this storedir supports.
-# It is used to initially choose the storedir to dump the object.
-# Note: To make optimal use of the max-size limits you should order
-# the cache_dir lines with the smallest max-size value first and the
-# ones with no max-size specification last.
-#
-# Note that for coss, max-size must be less than COSS_MEMBUF_SZ
-# (hard coded at 1 MB).
-#
-#Default:
-# cache_dir ufs /var/spool/squid 100 16 256
-
-# TAG: cache_access_log
-# Logs the client request activity. Contains an entry for
-# every HTTP and ICP queries received. To disable, enter "none".
-#
-#Default:
-# cache_access_log /var/log/squid/access.log
-
-# TAG: cache_log
-# Cache logging file. This is where general information about
-# your cache's behavior goes. You can increase the amount of data
-# logged to this file with the "debug_options" tag below.
-#
-#Default:
-# cache_log /var/log/squid/cache.log
-
-# TAG: cache_store_log
-# Logs the activities of the storage manager. Shows which
-# objects are ejected from the cache, and which objects are
-# saved and for how long. To disable, enter "none". There are
-# not really utilities to analyze this data, so you can safely
-# disable it.
-#
-#Default:
-# cache_store_log /var/log/squid/store.log
-
-# TAG: cache_swap_log
-# Location for the cache "swap.log." This log file holds the
-# metadata of objects saved on disk. It is used to rebuild the
-# cache during startup. Normally this file resides in each
-# 'cache_dir' directory, but you may specify an alternate
-# pathname here. Note you must give a full filename, not just
-# a directory. Since this is the index for the whole object
-# list you CANNOT periodically rotate it!
-#
-# If %s can be used in the file name then it will be replaced with a
-# a representation of the cache_dir name where each / is replaced
-# with '.'. This is needed to allow adding/removing cache_dir
-# lines when cache_swap_log is being used.
-#
-# If have more than one 'cache_dir', and %s is not used in the name
-# then these swap logs will have names such as:
-#
-# cache_swap_log.00
-# cache_swap_log.01
-# cache_swap_log.02
-#
-# The numbered extension (which is added automatically)
-# corresponds to the order of the 'cache_dir' lines in this
-# configuration file. If you change the order of the 'cache_dir'
-# lines in this file, then these log files will NOT correspond to
-# the correct 'cache_dir' entry (unless you manually rename
-# them). We recommend that you do NOT use this option. It is
-# better to keep these log files in each 'cache_dir' directory.
-#
-#Default:
-# none
-
-# TAG: emulate_httpd_log on|off
-# The Cache can emulate the log file format which many 'httpd'
-# programs use. To disable/enable this emulation, set
-# emulate_httpd_log to 'off' or 'on'. The default
-# is to use the native log format since it includes useful
-# information that Squid-specific log analyzers use.
-#
-#Default:
-# emulate_httpd_log off
-
-# TAG: log_ip_on_direct on|off
-# Log the destination IP address in the hierarchy log tag when going
-# direct. Earlier Squid versions logged the hostname here. If you
-# prefer the old way set this to off.
-#
-#Default:
-# log_ip_on_direct on
-
-# TAG: mime_table
-# Pathname to Squid's MIME table. You shouldn't need to change
-# this, but the default file contains examples and formatting
-# information if you do.
-#
-#Default:
-# mime_table /etc/squid/mime.conf
-
-# TAG: log_mime_hdrs on|off
-# The Cache can record both the request and the response MIME
-# headers for each HTTP transaction. The headers are encoded
-# safely and will appear as two bracketed fields at the end of
-# the access log (for either the native or httpd-emulated log
-# formats). To enable this logging set log_mime_hdrs to 'on'.
-#
-#Default:
-# log_mime_hdrs off
-
-# TAG: useragent_log
-# Squid will write the User-Agent field from HTTP requests
-# to the filename specified here. By default useragent_log
-# is disabled.
-#
-#Default:
-# none
-
-# TAG: referer_log
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-referer-log option
-#
-# Squid will write the Referer field from HTTP requests to the
-# filename specified here. By default referer_log is disabled.
-#
-#Default:
-# none
-
-# TAG: pid_filename
-# A filename to write the process-id to. To disable, enter "none".
-#
-#Default:
-# pid_filename /var/run/squid.pid
-
-# TAG: debug_options
-# Logging options are set as section,level where each source file
-# is assigned a unique section. Lower levels result in less
-# output, Full debugging (level 9) can result in a very large
-# log file, so be careful. The magic word "ALL" sets debugging
-# levels for all sections. We recommend normally running with
-# "ALL,1".
-#
-#Default:
-# debug_options ALL,1
-
-# TAG: log_fqdn on|off
-# Turn this on if you wish to log fully qualified domain names
-# in the access.log. To do this Squid does a DNS lookup of all
-# IP's connecting to it. This can (in some situations) increase
-# latency, which makes your cache seem slower for interactive
-# browsing.
-#
-#Default:
-# log_fqdn off
-
-# TAG: client_netmask
-# A netmask for client addresses in logfiles and cachemgr output.
-# Change this to protect the privacy of your cache clients.
-# A netmask of 255.255.255.0 will log all IP's in that range with
-# the last digit set to '0'.
-#
-#Default:
-# client_netmask 255.255.255.255
-
-
-# OPTIONS FOR EXTERNAL SUPPORT PROGRAMS
-# -----------------------------------------------------------------------------
-
-# TAG: ftp_user
-# If you want the anonymous login password to be more informative
-# (and enable the use of picky ftp servers), set this to something
-# reasonable for your domain, like wwwuser@somewhere.net
-#
-# The reason why this is domainless by default is that the
-# request can be made on the behalf of a user in any domain,
-# depending on how the cache is used.
-# Some ftp server also validate that the email address is valid
-# (for example perl.com).
-#
-#Default:
-# ftp_user Squid@
-
-# TAG: ftp_list_width
-# Sets the width of ftp listings. This should be set to fit in
-# the width of a standard browser. Setting this too small
-# can cut off long filenames when browsing ftp sites.
-#
-#Default:
-# ftp_list_width 32
-
-# TAG: ftp_passive
-# If your firewall does not allow Squid to use passive
-# connections, then turn off this option.
-#
-#Default:
-# ftp_passive on
-
-# TAG: ftp_sanitycheck
-# For security and data integrity reasons Squid by default performs
-# sanity checks of the addresses of FTP data connections ensure the
-# data connection is to the requested server. If you need to allow
-# FTP connections to servers using another IP address for the data
-# connection then turn this off.
-#
-#Default:
-# ftp_sanitycheck on
-
-# TAG: ftp_telnet_protocol
-# The FTP protocol is officially defined to use the telnet protocol
-# as transport channel for the control connection. However, many
-# implemenations are broken and does not respect this aspect of
-# the FTP protocol.
-#
-# If you have trouble accessing files with ASCII code 255 in the
-# path or similar problems involving this ASCII code then you can
-# try setting this directive to off. If that helps report to the
-# operator of the FTP server in question that their FTP server
-# is broken and does not follow the FTP standard.
-#
-#Default:
-# ftp_telnet_protocol on
-
-# TAG: cache_dns_program
-# Note: This option is only available if Squid is rebuilt with the
-# --disable-internal-dns option
-#
-# Specify the location of the executable for dnslookup process.
-#
-#Default:
-# cache_dns_program /usr/lib/squid/dnsserver
-
-# TAG: dns_children
-# Note: This option is only available if Squid is rebuilt with the
-# --disable-internal-dns option
-#
-# The number of processes spawn to service DNS name lookups.
-# For heavily loaded caches on large servers, you should
-# probably increase this value to at least 10. The maximum
-# is 32. The default is 5.
-#
-# You must have at least one dnsserver process.
-#
-#Default:
-# dns_children 5
-
-# TAG: dns_retransmit_interval
-# Initial retransmit interval for DNS queries. The interval is
-# doubled each time all configured DNS servers have been tried.
-#
-#
-#Default:
-# dns_retransmit_interval 5 seconds
-
-# TAG: dns_timeout
-# DNS Query timeout. If no response is received to a DNS query
-# within this time then all DNS servers for the queried domain
-# is assumed to be unavailable.
-#
-#Default:
-# dns_timeout 2 minutes
-
-# TAG: dns_defnames on|off
-# Note: This option is only available if Squid is rebuilt with the
-# --disable-internal-dns option
-#
-# Normally the 'dnsserver' disables the RES_DEFNAMES resolver
-# option (see res_init(3)). This prevents caches in a hierarchy
-# from interpreting single-component hostnames locally. To allow
-# dnsserver to handle single-component names, enable this
-# option.
-#
-#Default:
-# dns_defnames off
-
-# TAG: dns_nameservers
-# Use this if you want to specify a list of DNS name servers
-# (IP addresses) to use instead of those given in your
-# /etc/resolv.conf file.
-# On Windows platforms, if no value is specified here or in
-# the /etc/resolv.conf file, the list of DNS name servers are
-# taken from the Windows registry, both static and dynamic DHCP
-# configurations are supported.
-#
-# Example: dns_nameservers 10.0.0.1 192.172.0.4
-#
-#Default:
-# none
-
-# TAG: hosts_file
-# Location of the host-local IP name-address associations
-# database. Most Operating Systems have such a file: under
-# Un*X it's by default in /etc/hosts MS-Windows NT/2000 places
-# that in %SystemRoot%(by default
-# c:\winnt)\system32\drivers\etc\hosts, while Windows 9x/ME
-# places that in %windir%(usually c:\windows)\hosts
-#
-# The file contains newline-separated definitions, in the
-# form ip_address_in_dotted_form name [name ...] names are
-# whitespace-separated. lines beginnng with an hash (#)
-# character are comments.
-#
-# The file is checked at startup and upon configuration. If
-# set to 'none', it won't be checked. If append_domain is
-# used, that domain will be added to domain-local (i.e. not
-# containing any dot character) host definitions.
-#
-#Default:
-# hosts_file /etc/hosts
-
-# TAG: diskd_program
-# Specify the location of the diskd executable.
-# Note that this is only useful if you have compiled in
-# diskd as one of the store io modules.
-#
-#Default:
-# diskd_program /usr/lib/squid/diskd
-
-# TAG: unlinkd_program
-# Specify the location of the executable for file deletion process.
-#
-#Default:
-# unlinkd_program /usr/lib/squid/unlinkd
-
-# TAG: pinger_program
-# Specify the location of the executable for the pinger process.
-#
-#Default:
-# pinger_program /usr/lib/squid/pinger
-
-# TAG: redirect_program
-# Specify the location of the executable for the URL redirector.
-# Since they can perform almost any function there isn't one included.
-# See the FAQ (section 15) for information on how to write one.
-# By default, a redirector is not used.
-#
-#Default:
-# none
-
-# TAG: redirect_children
-# The number of redirector processes to spawn. If you start
-# too few Squid will have to wait for them to process a backlog of
-# URLs, slowing it down. If you start too many they will use RAM
-# and other system resources.
-#
-#Default:
-# redirect_children 5
-
-# TAG: redirect_rewrites_host_header
-# By default Squid rewrites any Host: header in redirected
-# requests. If you are running an accelerator then this may
-# not be a wanted effect of a redirector.
-#
-#Default:
-# redirect_rewrites_host_header on
-
-# TAG: redirector_access
-# If defined, this access list specifies which requests are
-# sent to the redirector processes. By default all requests
-# are sent.
-#
-#Default:
-# none
-
-# TAG: auth_param
-# This is used to define parameters for the various authentication
-# schemes supported by Squid.
-#
-# format: auth_param scheme parameter [setting]
-#
-# The order that authentication schemes are presented to the client is
-# dependant on the order the scheme first appears in config file. IE
-# has a bug (it's not rfc 2617 compliant) in that it will use the basic
-# scheme if basic is the first entry presented, even if more secure
-# schemes are presented. For now use the order in the recommended
-# settings section below. If other browsers have difficulties (don't
-# recognise the schemes offered even if you are using basic) then either
-# put basic first, or disable the other schemes (by commenting out their
-# program entry).
-#
-# Once an authentication scheme is fully configured, it can only be
-# shutdown by shutting squid down and restarting. Changes can be made on
-# the fly and activated with a reconfigure. I.E. You can change to a
-# different helper, but not unconfigure the helper completely.
-#
-# Please note that while this directive defines how Squid processes
-# authentication it does not automatically activate authentication.
-# To use authenticaiton you must in addition make use of acls based
-# on login name in http_access (proxy_auth, proxy_auth_regex or
-# external with %LOGIN used in the format tag). The browser will be
-# challenged for authentication on the first such acl encountered
-# in http_access processing and will also be rechallenged for new
-# login credentials if the request is being denied by a proxy_auth
-# type acl.
-#
-# === Parameters for the basic scheme follow. ===
-#
-# "program" cmdline
-# Specify the command for the external authenticator. Such a program
-# reads a line containing "username password" and replies "OK" or
-# "ERR" in an endless loop.
-#
-# By default, the basic authentication sheme is not used unless a
-# program is specified.
-#
-# If you want to use the traditional proxy authentication, jump over to
-# the helpers/basic_auth/NCSA directory and type:
-# % make
-# % make install
-#
-# Then, set this line to something like
-#
-# auth_param basic program /usr/libexec/ncsa_auth /usr/etc/passwd
-#
-# "children" numberofchildren
-# The number of authenticator processes to spawn.
-# If you start too few Squid will have to wait for them to process a
-# backlog of usercode/password verifications, slowing it down. When
-# password verifications are done via a (slow) network you are likely to
-# need lots of authenticator processes.
-# auth_param basic children 5
-#
-# "realm" realmstring
-# Specifies the realm name which is to be reported to the client for
-# the basic proxy authentication scheme (part of the text the user
-# will see when prompted their username and password).
-# auth_param basic realm Squid proxy-caching web server
-#
-# "credentialsttl" timetolive
-# Specifies how long squid assumes an externally validated
-# username:password pair is valid for - in other words how often the
-# helper program is called for that user. Set this low to force
-# revalidation with short lived passwords. Note that setting this high
-# does not impact your susceptability to replay attacks unless you are
-# using an one-time password system (such as SecureID). If you are using
-# such a system, you will be vulnerable to replay attacks unless you
-# also use the max_user_ip ACL in an http_access rule.
-# auth_param basic credentialsttl 2 hours
-#
-# === Parameters for the digest scheme follow ===
-#
-# "program" cmdline
-# Specify the command for the external authenticator. Such a program
-# reads a line containing "username":"realm" and replies with the
-# appropriate H(A1) value base64 encoded. See rfc 2616 for the
-# definition of H(A1).
-#
-# By default, the digest authentication scheme is not used unless a
-# program is specified.
-#
-# If you want to use a digest authenticator, jump over to the
-# helpers/digest_auth/ directory and choose the authenticator to use.
-# It it's directory type
-# % make
-# % make install
-#
-# Then, set this line to something like
-#
-# auth_param digest program /usr/libexec/digest_auth_pw /usr/etc/digpass
-#
-#
-# "children" numberofchildren
-# The number of authenticator processes to spawn (no default). If you
-# start too few Squid will have to wait for them to process a backlog of
-# H(A1) calculations, slowing it down. When the H(A1) calculations are
-# done via a (slow) network you are likely to need lots of authenticator
-# processes.
-# auth_param digest children 5
-#
-# "realm" realmstring
-# Specifies the realm name which is to be reported to the client for the
-# digest proxy authentication scheme (part of the text the user will see
-# when prompted their username and password).
-# auth_param digest realm Squid proxy-caching web server
-#
-# "nonce_garbage_interval" timeinterval
-# Specifies the interval that nonces that have been issued to clients are
-# checked for validity.
-# auth_param digest nonce_garbage_interval 5 minutes
-#
-# "nonce_max_duration" timeinterval
-# Specifies the maximum length of time a given nonce will be valid for.
-# auth_param digest nonce_max_duration 30 minutes
-#
-# "nonce_max_count" number
-# Specifies the maximum number of times a given nonce can be used.
-# auth_param digest nonce_max_count 50
-#
-# "nonce_strictness" on|off
-# Determines if squid requires strict increment-by-1 behaviour for nonce
-# counts, or just incrementing (off - for use when useragents generate
-# nonce counts that occasionally miss 1 (ie, 1,2,4,6)).
-# auth_param digest nonce_strictness off
-#
-# "check_nonce_count" on|off
-# This directive if set to off can disable the nonce count check
-# completely to work around buggy digest qop implementations in certain
-# mainstream browser versions. Default on to check the nonce count to
-# protect from authentication replay attacks.
-# auth_param digest check_nonce_count on
-#
-# "post_workaround" on|off
-# This is a workaround to certain buggy browsers who sends an incorrect
-# request digest in POST requests when reusing the same nonce as aquired
-# earlier in response to a GET request.
-# auth_param digest post_workaround off
-#
-# === NTLM scheme options follow ===
-#
-# "program" cmdline
-# Specify the command for the external ntlm authenticator. Such a
-# program participates in the NTLMSSP exchanges between Squid and the
-# client and reads commands according to the Squid ntlmssp helper
-# protocol. See helpers/ntlm_auth/ for details. Recommended ntlm
-# authenticator is ntlm_auth from Samba-3.X, but a number of other
-# ntlm authenticators is available.
-#
-# By default, the ntlm authentication scheme is not used unless a
-# program is specified.
-#
-# auth_param ntlm program /path/to/samba/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp
-#
-# "children" numberofchildren
-# The number of authenticator processes to spawn (no default). If you
-# start too few Squid will have to wait for them to process a backlog
-# of credential verifications, slowing it down. When crendential
-# verifications are done via a (slow) network you are likely to need
-# lots of authenticator processes.
-# auth_param ntlm children 5
-#
-# "max_challenge_reuses" number
-# The maximum number of times a challenge given by a ntlm authentication
-# helper can be reused. Increasing this number increases your exposure
-# to replay attacks on your network. 0 (the default) means use the
-# challenge is used only once. See also the max_ntlm_challenge_lifetime
-# directive if enabling challenge reuses.
-# auth_param ntlm max_challenge_reuses 0
-#
-# "max_challenge_lifetime" timespan
-# The maximum time period that a ntlm challenge is reused over. The
-# actual period will be the minimum of this time AND the number of
-# reused challenges.
-# auth_param ntlm max_challenge_lifetime 2 minutes
-#
-# "use_ntlm_negotiate" on|off
-# Enables support for NTLM NEGOTIATE packet exchanges with the helper.
-# The configured ntlm authenticator must be able to handle NTLM
-# NEGOTIATE packet. See the authenticator programs documentation if
-# unsure. ntlm_auth from Samba-3.0.2 or later supports the use of this
-# option.
-# The NEGOTIATE packet is required to support NTLMv2 and a
-# number of other negotiable NTLMSSP options, and also makes it
-# more likely the negotiation is successful. Enabling this parameter
-# will also solve problems encountered when NT domain policies
-# restrict users to access only certain workstations. When this is off,
-# all users must be allowed to log on the proxy servers too, or they'll
-# get "invalid workstation" errors - and access denied - when trying to
-# use Squid's services.
-# Use of ntlm NEGOTIATE is incompatible with challenge reuse, so
-# enabling this parameter will OVERRIDE the max_challenge_reuses and
-# max_challenge_lifetime parameters and set them to 0.
-# auth_param ntlm use_ntlm_negotiate off
-#
-#Recommended minimum configuration:
-#auth_param digest program <uncomment and complete this line>
-#auth_param digest children 5
-#auth_param digest realm Squid proxy-caching web server
-#auth_param digest nonce_garbage_interval 5 minutes
-#auth_param digest nonce_max_duration 30 minutes
-#auth_param digest nonce_max_count 50
-#auth_param ntlm program /usr/lib/squid/ntlm_auth IPH\\PDC
-#auth_param ntlm children 5
-#auth_param ntlm max_challenge_reuses 0
-#auth_param ntlm max_challenge_lifetime 2 minutes
-#auth_param ntlm use_ntlm_negotiate off
-auth_param basic program /usr/lib/squid/squid_ldap_auth -b ou=People,dc=example,dc=com -f (&(uid=%s)(objectClass=gosaProxyAccount))
-auth_param basic children 5
-auth_param basic realm Squid proxy-caching web server
-auth_param basic credentialsttl 2 hours
-
-# TAG: authenticate_cache_garbage_interval
-# The time period between garbage collection across the username cache.
-# This is a tradeoff between memory utilisation (long intervals - say
-# 2 days) and CPU (short intervals - say 1 minute). Only change if you
-# have good reason to.
-#
-#Default:
-# authenticate_cache_garbage_interval 1 hour
-
-# TAG: authenticate_ttl
-# The time a user & their credentials stay in the logged in user cache
-# since their last request. When the garbage interval passes, all user
-# credentials that have passed their TTL are removed from memory.
-#
-#Default:
-# authenticate_ttl 1 hour
-
-# TAG: authenticate_ip_ttl
-# If you use proxy authentication and the 'max_user_ip' ACL, this
-# directive controls how long Squid remembers the IP addresses
-# associated with each user. Use a small value (e.g., 60 seconds) if
-# your users might change addresses quickly, as is the case with
-# dialups. You might be safe using a larger value (e.g., 2 hours) in a
-# corporate LAN environment with relatively static address assignments.
-#
-#Default:
-# authenticate_ip_ttl 0 seconds
-
-# TAG: external_acl_type
-# This option defines external acl classes using a helper program to
-# look up the status
-#
-# external_acl_type name [options] FORMAT.. /path/to/helper [helper arguments..]
-#
-# Options:
-#
-# ttl=n TTL in seconds for cached results (defaults to 3600
-# for 1 hour)
-# negative_ttl=n
-# TTL for cached negative lookups (default same
-# as ttl)
-# children=n Concurrency level / number of processes spawn
-# to service external acl lookups of this type.
-# Note: see compatibility note below
-# cache=n result cache size, 0 is unbounded (default)
-#
-# FORMAT specifications
-#
-# %LOGIN Authenticated user login name
-# %IDENT Ident user name
-# %SRC Client IP
-# %DST Requested host
-# %PROTO Requested protocol
-# %PORT Requested port
-# %METHOD Request method
-# %{Header} HTTP request header
-# %{Hdr:member} HTTP request header list member
-# %{Hdr:;member}
-# HTTP request header list member using ; as
-# list separator. ; can be any non-alphanumeric
-# character.
-#
-# In addition, any string specified in the referencing acl will
-# also be included in the helper request line, after the specified
-# formats (see the "acl external" directive)
-#
-# The helper receives lines per the above format specification,
-# and returns lines starting with OK or ERR indicating the validity
-# of the request and optionally followed by additional keywords with
-# more details.
-#
-# General result syntax:
-#
-# OK/ERR keyword=value ...
-#
-# Defined keywords:
-#
-# user= The users name (login)
-# error= Error description (only defined for ERR results)
-#
-# Keyword values need to be enclosed in quotes if they may contain
-# whitespace, or the whitespace escaped using \. Any quotes or \
-# characters within the keyword value must be \ escaped.
-#
-# Compatibility Note: The children= option was named concurrency= in
-# Squid-2.5.STABLE3 and earlier and such syntax is still accepted to
-# keep compatibility within the Squid-2.5 release. However, the meaning
-# of concurrency= option has changed in Squid-3 and the old syntax of
-# the directive is therefore depreated from Squid-2.5.STABLE4 and later.
-# If you want to be able to easily downgrade to earlier Squid-2.5
-# releases then you may want to continue using the old name, if not
-# please use the new name.
-#
-#Default:
-# none
-
-
-# OPTIONS FOR TUNING THE CACHE
-# -----------------------------------------------------------------------------
-
-# TAG: wais_relay_host
-# TAG: wais_relay_port
-# Relay WAIS request to host (1st arg) at port (2 arg).
-#
-#Default:
-# wais_relay_port 0
-
-# TAG: request_header_max_size (KB)
-# This specifies the maximum size for HTTP headers in a request.
-# Request headers are usually relatively small (about 512 bytes).
-# Placing a limit on the request header size will catch certain
-# bugs (for example with persistent connections) and possibly
-# buffer-overflow or denial-of-service attacks.
-#
-#Default:
-# request_header_max_size 10 KB
-
-# TAG: request_body_max_size (KB)
-# This specifies the maximum size for an HTTP request body.
-# In other words, the maximum size of a PUT/POST request.
-# A user who attempts to send a request with a body larger
-# than this limit receives an "Invalid Request" error message.
-# If you set this parameter to a zero (the default), there will
-# be no limit imposed.
-#
-#Default:
-# request_body_max_size 0 KB
-
-# TAG: refresh_pattern
-# usage: refresh_pattern [-i] regex min percent max [options]
-#
-# By default, regular expressions are CASE-SENSITIVE. To make
-# them case-insensitive, use the -i option.
-#
-# 'Min' is the time (in minutes) an object without an explicit
-# expiry time should be considered fresh. The recommended
-# value is 0, any higher values may cause dynamic applications
-# to be erroneously cached unless the application designer
-# has taken the appropriate actions.
-#
-# 'Percent' is a percentage of the objects age (time since last
-# modification age) an object without explicit expiry time
-# will be considered fresh.
-#
-# 'Max' is an upper limit on how long objects without an explicit
-# expiry time will be considered fresh.
-#
-# options: override-expire
-# override-lastmod
-# reload-into-ims
-# ignore-reload
-#
-# override-expire enforces min age even if the server
-# sent a Expires: header. Doing this VIOLATES the HTTP
-# standard. Enabling this feature could make you liable
-# for problems which it causes.
-#
-# override-lastmod enforces min age even on objects
-# that was modified recently.
-#
-# reload-into-ims changes client no-cache or ``reload''
-# to If-Modified-Since requests. Doing this VIOLATES the
-# HTTP standard. Enabling this feature could make you
-# liable for problems which it causes.
-#
-# ignore-reload ignores a client no-cache or ``reload''
-# header. Doing this VIOLATES the HTTP standard. Enabling
-# this feature could make you liable for problems which
-# it causes.
-#
-# Basically a cached object is:
-#
-# FRESH if expires < now, else STALE
-# STALE if age > max
-# FRESH if lm-factor < percent, else STALE
-# FRESH if age < min
-# else STALE
-#
-# The refresh_pattern lines are checked in the order listed here.
-# The first entry which matches is used. If none of the entries
-# match, then the default will be used.
-#
-# Note, you must uncomment all the default lines if you want
-# to change one. The default setting is only active if none is
-# used.
-#
-#Suggested default:
-refresh_pattern ^ftp: 1440 20% 10080
-refresh_pattern ^gopher: 1440 0% 1440
-refresh_pattern . 0 20% 4320
-
-# TAG: quick_abort_min (KB)
-# TAG: quick_abort_max (KB)
-# TAG: quick_abort_pct (percent)
-# The cache by default continues downloading aborted requests
-# which are almost completed (less than 16 KB remaining). This
-# may be undesirable on slow (e.g. SLIP) links and/or very busy
-# caches. Impatient users may tie up file descriptors and
-# bandwidth by repeatedly requesting and immediately aborting
-# downloads.
-#
-# When the user aborts a request, Squid will check the
-# quick_abort values to the amount of data transfered until
-# then.
-#
-# If the transfer has less than 'quick_abort_min' KB remaining,
-# it will finish the retrieval.
-#
-# If the transfer has more than 'quick_abort_max' KB remaining,
-# it will abort the retrieval.
-#
-# If more than 'quick_abort_pct' of the transfer has completed,
-# it will finish the retrieval.
-#
-# If you do not want any retrieval to continue after the client
-# has aborted, set both 'quick_abort_min' and 'quick_abort_max'
-# to '0 KB'.
-#
-# If you want retrievals to always continue if they are being
-# cached then set 'quick_abort_min' to '-1 KB'.
-#
-#Default:
-# quick_abort_min 16 KB
-# quick_abort_max 16 KB
-# quick_abort_pct 95
-
-# TAG: negative_ttl time-units
-# Time-to-Live (TTL) for failed requests. Certain types of
-# failures (such as "connection refused" and "404 Not Found") are
-# negatively-cached for a configurable amount of time. The
-# default is 5 minutes. Note that this is different from
-# negative caching of DNS lookups.
-#
-#Default:
-# negative_ttl 5 minutes
-
-# TAG: positive_dns_ttl time-units
-# Upper limit on how long Squid will cache positive DNS responses.
-# Default is 6 hours (360 minutes). This directive must be set
-# larger than negative_dns_ttl.
-#
-#Default:
-# positive_dns_ttl 6 hours
-
-# TAG: negative_dns_ttl time-units
-# Time-to-Live (TTL) for negative caching of failed DNS lookups.
-# This also makes sets the lower cache limit on positive lookups.
-# Minimum value is 1 second, and it is not recommendable to go
-# much below 10 seconds.
-#
-#Default:
-# negative_dns_ttl 1 minute
-
-# TAG: range_offset_limit (bytes)
-# Sets a upper limit on how far into the the file a Range request
-# may be to cause Squid to prefetch the whole file. If beyond this
-# limit then Squid forwards the Range request as it is and the result
-# is NOT cached.
-#
-# This is to stop a far ahead range request (lets say start at 17MB)
-# from making Squid fetch the whole object up to that point before
-# sending anything to the client.
-#
-# A value of -1 causes Squid to always fetch the object from the
-# beginning so that it may cache the result. (2.0 style)
-#
-# A value of 0 causes Squid to never fetch more than the
-# client requested. (default)
-#
-#Default:
-# range_offset_limit 0 KB
-
-
-# TIMEOUTS
-# -----------------------------------------------------------------------------
-
-# TAG: forward_timeout time-units
-# This parameter specifies how long Squid should at most attempt in
-# finding a forwarding path for the request before giving up.
-#
-#Default:
-# forward_timeout 4 minutes
-
-# TAG: connect_timeout time-units
-# This parameter specifies how long to wait for the TCP connect to
-# the requested server or peer to complete before Squid should
-# attempt to find another path where to forward the request.
-#
-#Default:
-# connect_timeout 1 minute
-
-# TAG: peer_connect_timeout time-units
-# This parameter specifies how long to wait for a pending TCP
-# connection to a peer cache. The default is 30 seconds. You
-# may also set different timeout values for individual neighbors
-# with the 'connect-timeout' option on a 'cache_peer' line.
-#
-#Default:
-# peer_connect_timeout 30 seconds
-
-# TAG: read_timeout time-units
-# The read_timeout is applied on server-side connections. After
-# each successful read(), the timeout will be extended by this
-# amount. If no data is read again after this amount of time,
-# the request is aborted and logged with ERR_READ_TIMEOUT. The
-# default is 15 minutes.
-#
-#Default:
-# read_timeout 15 minutes
-
-# TAG: request_timeout
-# How long to wait for an HTTP request after initial
-# connection establishment.
-#
-#Default:
-# request_timeout 5 minutes
-
-# TAG: persistent_request_timeout
-# How long to wait for the next HTTP request on a persistent
-# connection after the previous request completes.
-#
-#Default:
-# persistent_request_timeout 1 minute
-
-# TAG: client_lifetime time-units
-# The maximum amount of time that a client (browser) is allowed to
-# remain connected to the cache process. This protects the Cache
-# from having a lot of sockets (and hence file descriptors) tied up
-# in a CLOSE_WAIT state from remote clients that go away without
-# properly shutting down (either because of a network failure or
-# because of a poor client implementation). The default is one
-# day, 1440 minutes.
-#
-# NOTE: The default value is intended to be much larger than any
-# client would ever need to be connected to your cache. You
-# should probably change client_lifetime only as a last resort.
-# If you seem to have many client connections tying up
-# filedescriptors, we recommend first tuning the read_timeout,
-# request_timeout, persistent_request_timeout and quick_abort values.
-#
-#Default:
-# client_lifetime 1 day
-
-# TAG: half_closed_clients
-# Some clients may shutdown the sending side of their TCP
-# connections, while leaving their receiving sides open. Sometimes,
-# Squid can not tell the difference between a half-closed and a
-# fully-closed TCP connection. By default, half-closed client
-# connections are kept open until a read(2) or write(2) on the
-# socket returns an error. Change this option to 'off' and Squid
-# will immediately close client connections when read(2) returns
-# "no more data to read."
-#
-#Default:
-# half_closed_clients on
-
-# TAG: pconn_timeout
-# Timeout for idle persistent connections to servers and other
-# proxies.
-#
-#Default:
-# pconn_timeout 120 seconds
-
-# TAG: ident_timeout
-# Maximum time to wait for IDENT lookups to complete.
-#
-# If this is too high, and you enabled IDENT lookups from untrusted
-# users, then you might be susceptible to denial-of-service by having
-# many ident requests going at once.
-#
-#Default:
-# ident_timeout 10 seconds
-
-# TAG: shutdown_lifetime time-units
-# When SIGTERM or SIGHUP is received, the cache is put into
-# "shutdown pending" mode until all active sockets are closed.
-# This value is the lifetime to set for all open descriptors
-# during shutdown mode. Any active clients after this many
-# seconds will receive a 'timeout' message.
-#
-#Default:
-# shutdown_lifetime 30 seconds
-
-
-# ACCESS CONTROLS
-# -----------------------------------------------------------------------------
-
-# TAG: acl
-# Defining an Access List
-#
-# acl aclname acltype string1 ...
-# acl aclname acltype "file" ...
-#
-# when using "file", the file should contain one item per line
-#
-# acltype is one of the types described below
-#
-# By default, regular expressions are CASE-SENSITIVE. To make
-# them case-insensitive, use the -i option.
-#
-# acl aclname src ip-address/netmask ... (clients IP address)
-# acl aclname src addr1-addr2/netmask ... (range of addresses)
-# acl aclname dst ip-address/netmask ... (URL host's IP address)
-# acl aclname myip ip-address/netmask ... (local socket IP address)
-#
-# acl aclname srcdomain .foo.com ... # reverse lookup, client IP
-# acl aclname dstdomain .foo.com ... # Destination server from URL
-# acl aclname srcdom_regex [-i] xxx ... # regex matching client name
-# acl aclname dstdom_regex [-i] xxx ... # regex matching server
-# # For dstdomain and dstdom_regex a reverse lookup is tried if a IP
-# # based URL is used. The name "none" is used if the reverse lookup
-# # fails.
-#
-# acl aclname time [day-abbrevs] [h1:m1-h2:m2]
-# day-abbrevs:
-# S - Sunday
-# M - Monday
-# T - Tuesday
-# W - Wednesday
-# H - Thursday
-# F - Friday
-# A - Saturday
-# h1:m1 must be less than h2:m2
-# acl aclname url_regex [-i] ^http:// ... # regex matching on whole URL
-# acl aclname urlpath_regex [-i] \.gif$ ... # regex matching on URL path
-# acl aclname urllogin [-i] [^a-zA-Z0-9] ... # regex matching on URL login field
-# acl aclname port 80 70 21 ...
-# acl aclname port 0-1024 ... # ranges allowed
-# acl aclname myport 3128 ... # (local socket TCP port)
-# acl aclname proto HTTP FTP ...
-# acl aclname method GET POST ...
-# acl aclname browser [-i] regexp ...
-# # pattern match on User-Agent header
-# acl aclname referer_regex [-i] regexp ...
-# # pattern match on Referer header
-# # Referer is highly unreliable, so use with care
-# acl aclname ident username ...
-# acl aclname ident_regex [-i] pattern ...
-# # string match on ident output.
-# # use REQUIRED to accept any non-null ident.
-# acl aclname src_as number ...
-# acl aclname dst_as number ...
-# # Except for access control, AS numbers can be used for
-# # routing of requests to specific caches. Here's an
-# # example for routing all requests for AS#1241 and only
-# # those to mycache.mydomain.net:
-# # acl asexample dst_as 1241
-# # cache_peer_access mycache.mydomain.net allow asexample
-# # cache_peer_access mycache_mydomain.net deny all
-#
-# acl aclname proxy_auth username ...
-# acl aclname proxy_auth_regex [-i] pattern ...
-# # list of valid usernames
-# # use REQUIRED to accept any valid username.
-# #
-# # NOTE: when a Proxy-Authentication header is sent but it is not
-# # needed during ACL checking the username is NOT logged
-# # in access.log.
-# #
-# # NOTE: proxy_auth requires a EXTERNAL authentication program
-# # to check username/password combinations (see
-# # auth_param directive).
-# #
-# # WARNING: proxy_auth can't be used in a transparent proxy. It
-# # collides with any authentication done by origin servers. It may
-# # seem like it works at first, but it doesn't.
-#
-# acl aclname snmp_community string ...
-# # A community string to limit access to your SNMP Agent
-# # Example:
-# #
-# # acl snmppublic snmp_community public
-#
-# acl aclname maxconn number
-# # This will be matched when the client's IP address has
-# # more than <number> HTTP connections established.
-#
-# acl aclname max_user_ip [-s] number
-# # This will be matched when the user attempts to log in from more
-# # than <number> different ip addresses. The authenticate_ip_ttl
-# # parameter controls the timeout on the ip entries.
-# # If -s is specified then the limit is strict, denying browsing
-# # from any further IP addresses until the ttl has expired. Without
-# # -s Squid will just annoy the user by "randomly" denying requests.
-# # (the counter is then reset each time the limit is reached and a
-# # request is denied)
-# # NOTE: in acceleration mode or where there is mesh of child proxies,
-# # clients may appear to come from multiple addresses if they are
-# # going through proxy farms, so a limit of 1 may cause user problems.
-#
-# acl aclname req_mime_type mime-type1 ...
-# # regex match agains the mime type of the request generated
-# # by the client. Can be used to detect file upload or some
-# # types HTTP tunelling requests.
-# # NOTE: This does NOT match the reply. You cannot use this
-# # to match the returned file type.
-#
-# acl aclname rep_mime_type mime-type1 ...
-# # regex match against the mime type of the reply recieved by
-# # squid. Can be used to detect file download or some
-# # types HTTP tunelling requests.
-# # NOTE: This has no effect in http_access rules. It only has
-# # effect in rules that affect the reply data stream such as
-# # http_reply_access.
-#
-# acl acl_name external class_name [arguments...]
-# # external ACL lookup via a helper class defined by the
-# # external_acl_type directive.
-#
-#Examples:
-#acl myexample dst_as 1241
-#acl password proxy_auth REQUIRED
-#acl fileupload req_mime_type -i ^multipart/form-data$
-#acl javascript rep_mime_type -i ^application/x-javascript$
-#
-#Recommended minimum configuration:
-acl all src 0.0.0.0/0.0.0.0
-acl manager proto cache_object
-acl localhost src 127.0.0.1/255.255.255.255
-acl to_localhost dst 127.0.0.0/8
-acl SSL_ports port 443 563
-acl Jabber_ports port 5222
-acl Safe_ports port 80 # http
-acl Safe_ports port 21 # ftp
-acl Safe_ports port 443 563 # https, snews
-acl Safe_ports port 70 # gopher
-acl Safe_ports port 210 # wais
-acl Safe_ports port 1025-65535 # unregistered ports
-acl Safe_ports port 280 # http-mgmt
-acl Safe_ports port 488 # gss-http
-acl Safe_ports port 591 # filemaker
-acl Safe_ports port 777 # multiling http
-acl CONNECT method CONNECT
-
-# TAG: http_access
-# Allowing or Denying access based on defined access lists
-#
-# Access to the HTTP port:
-# http_access allow|deny [!]aclname ...
-#
-# NOTE on default values:
-#
-# If there are no "access" lines present, the default is to deny
-# the request.
-#
-# If none of the "access" lines cause a match, the default is the
-# opposite of the last line in the list. If the last line was
-# deny, then the default is allow. Conversely, if the last line
-# is allow, the default will be deny. For these reasons, it is a
-# good idea to have an "deny all" or "allow all" entry at the end
-# of your access lists to avoid potential confusion.
-#
-#Default:
-# http_access deny all
-#
-#Recommended minimum configuration:
-#
-# Only allow cachemgr access from localhost
-http_access allow manager localhost
-http_access deny manager
-# Deny requests to unknown ports
-http_access deny !Safe_ports
-# Deny CONNECT to other than SSL ports
-http_access deny CONNECT !SSL_ports !Jabber_ports
-#
-# We strongly recommend to uncomment the following to protect innocent
-# web applications running on the proxy server who think that the only
-# one who can access services on "localhost" is a local user
-#http_access deny to_localhost
-#
-# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
-
-# Example rule allowing access from your local networks. Adapt
-# to list your (internal) IP networks from where browsing should
-# be allowed
-acl password proxy_auth REQUIRED
-
-http_access allow password
-
-
-# And finally deny all other access to this proxy
-http_access allow localhost
-http_access deny all
-
-# TAG: http_reply_access
-# Allow replies to client requests. This is complementary to http_access.
-#
-# http_reply_access allow|deny [!] aclname ...
-#
-# NOTE: if there are no access lines present, the default is to allow
-# all replies
-#
-# If none of the access lines cause a match, then the opposite of the
-# last line will apply. Thus it is good practice to end the rules
-# with an "allow all" or "deny all" entry.
-#
-#Default:
-# http_reply_access allow all
-#
-#Recommended minimum configuration:
-#
-# Insert your own rules here.
-#
-#
-# and finally allow by default
-http_reply_access allow all
-
-# TAG: icp_access
-# Allowing or Denying access to the ICP port based on defined
-# access lists
-#
-# icp_access allow|deny [!]aclname ...
-#
-# See http_access for details
-#
-#Default:
-# icp_access deny all
-#
-#Allow ICP queries from everyone
-#icp_access allow all
-
-# TAG: miss_access
-# Use to force your neighbors to use you as a sibling instead of
-# a parent. For example:
-#
-# acl localclients src 172.16.0.0/16
-# miss_access allow localclients
-# miss_access deny !localclients
-#
-# This means that only your local clients are allowed to fetch
-# MISSES and all other clients can only fetch HITS.
-#
-# By default, allow all clients who passed the http_access rules
-# to fetch MISSES from us.
-#
-#Default setting:
-# miss_access allow all
-
-# TAG: cache_peer_access
-# Similar to 'cache_peer_domain' but provides more flexibility by
-# using ACL elements.
-#
-# cache_peer_access cache-host allow|deny [!]aclname ...
-#
-# The syntax is identical to 'http_access' and the other lists of
-# ACL elements. See the comments for 'http_access' below, or
-# the Squid FAQ (http://www.squid-cache.org/FAQ/FAQ-10.html).
-#
-#Default:
-# none
-
-# TAG: ident_lookup_access
-# A list of ACL elements which, if matched, cause an ident
-# (RFC 931) lookup to be performed for this request. For
-# example, you might choose to always perform ident lookups
-# for your main multi-user Unix boxes, but not for your Macs
-# and PCs. By default, ident lookups are not performed for
-# any requests.
-#
-# To enable ident lookups for specific client addresses, you
-# can follow this example:
-#
-# acl ident_aware_hosts src 198.168.1.0/255.255.255.0
-# ident_lookup_access allow ident_aware_hosts
-# ident_lookup_access deny all
-#
-# Only src type ACL checks are fully supported. A src_domain
-# ACL might work at times, but it will not always provide
-# the correct result.
-#
-#Default:
-# ident_lookup_access deny all
-
-# TAG: tcp_outgoing_tos
-# Allows you to select a TOS/Diffserv value to mark outgoing
-# connections with, based on the username or source address
-# making the request.
-#
-# tcp_outgoing_tos ds-field [!]aclname ...
-#
-# Example where normal_service_net uses the TOS value 0x00
-# and normal_service_net uses 0x20
-#
-# acl normal_service_net src 10.0.0.0/255.255.255.0
-# acl good_service_net src 10.0.1.0/255.255.255.0
-# tcp_outgoing_tos 0x00 normal_service_net 0x00
-# tcp_outgoing_tos 0x20 good_service_net
-#
-# TOS/DSCP values really only have local significance - so you should
-# know what you're specifying. For more, see RFC 2474
-#
-# The TOS/DSCP byte must be exactly that - a byte, value 0 - 255, or
-# "default" to use whatever default your host has.
-#
-# Processing proceeds in the order specified, and stops at first fully
-# matching line.
-#
-#Default:
-# none
-
-# TAG: tcp_outgoing_address
-# Allows you to map requests to different outgoing IP addresses
-# based on the username or sourceaddress of the user making
-# the request.
-#
-# tcp_outgoing_address ipaddr [[!]aclname] ...
-#
-# Example where requests from 10.0.0.0/24 will be forwareded
-# with source address 10.1.0.1, 10.0.2.0/24 forwarded with
-# source address 10.1.0.2 and the rest will be forwarded with
-# source address 10.1.0.3.
-#
-# acl normal_service_net src 10.0.0.0/255.255.255.0
-# acl good_service_net src 10.0.1.0/255.255.255.0
-# tcp_outgoing_address 10.0.0.1 normal_service_net
-# tcp_outgoing_address 10.0.0.2 good_service_net
-# tcp_outgoing_address 10.0.0.3
-#
-# Processing proceeds in the order specified, and stops at first fully
-# matching line.
-#
-#Default:
-# none
-
-# TAG: reply_body_max_size bytes allow|deny acl acl...
-# This option specifies the maximum size of a reply body in bytes.
-# It can be used to prevent users from downloading very large files,
-# such as MP3's and movies. When the reply headers are recieved,
-# the reply_body_max_size lines are processed, and the first line with
-# a result of "allow" is used as the maximum body size for this reply.
-# This size is then checked twice. First when we get the reply headers,
-# we check the content-length value. If the content length value exists
-# and is larger than the allowed size, the request is denied and the
-# user receives an error message that says "the request or reply
-# is too large." If there is no content-length, and the reply
-# size exceeds this limit, the client's connection is just closed
-# and they will receive a partial reply.
-#
-# WARNING: downstream caches probably can not detect a partial reply
-# if there is no content-length header, so they will cache
-# partial responses and give them out as hits. You should NOT
-# use this option if you have downstream caches.
-#
-# If you set this parameter to zero (the default), there will be
-# no limit imposed.
-#
-#Default:
-# reply_body_max_size 0 allow all
-
-
-# ADMINISTRATIVE PARAMETERS
-# -----------------------------------------------------------------------------
-
-# TAG: cache_mgr
-# Email-address of local cache manager who will receive
-# mail if the cache dies. The default is "webmaster."
-#
-#Default:
-# cache_mgr webmaster
-
-# TAG: cache_effective_user
-# TAG: cache_effective_group
-#
-# If you start Squid as root, it will change its effective/real
-# UID/GID to the UID/GID specified below. The default is to
-# change to UID to nobody. If you define cache_effective_user,
-# but not cache_effective_group, Squid sets the GID the
-# effective user's default group ID (taken from the password
-# file).
-#
-# If Squid is not started as root, the cache_effective_user
-# value is ignored and the GID value is unchanged by default.
-# However, you can make Squid change its GID to another group
-# that the process owner is a member of. Note that if Squid
-# is not started as root then you cannot set http_port to a
-# value lower than 1024.
-#
-#Default:
-# cache_effective_user squid
-# cache_effective_group squid
-
-# TAG: visible_hostname
-# If you want to present a special hostname in error messages, etc,
-# then define this. Otherwise, the return value of gethostname()
-# will be used. If you have multiple caches in a cluster and
-# get errors about IP-forwarding you must set them to have individual
-# names with this setting.
-#
-#Default:
-# none
-
-# TAG: unique_hostname
-# If you want to have multiple machines with the same
-# 'visible_hostname' then you must give each machine a different
-# 'unique_hostname' so that forwarding loops can be detected.
-#
-#Default:
-# none
-
-# TAG: hostname_aliases
-# A list of other DNS names that your cache has.
-#
-#Default:
-# none
-
-
-# OPTIONS FOR THE CACHE REGISTRATION SERVICE
-# -----------------------------------------------------------------------------
-#
-# This section contains parameters for the (optional) cache
-# announcement service. This service is provided to help
-# cache administrators locate one another in order to join or
-# create cache hierarchies.
-#
-# An 'announcement' message is sent (via UDP) to the registration
-# service by Squid. By default, the announcement message is NOT
-# SENT unless you enable it with 'announce_period' below.
-#
-# The announcement message includes your hostname, plus the
-# following information from this configuration file:
-#
-# http_port
-# icp_port
-# cache_mgr
-#
-# All current information is processed regularly and made
-# available on the Web at http://www.ircache.net/Cache/Tracker/.
-
-# TAG: announce_period
-# This is how frequently to send cache announcements. The
-# default is `0' which disables sending the announcement
-# messages.
-#
-# To enable announcing your cache, just uncomment the line
-# below.
-#
-#Default:
-# announce_period 0
-#
-#To enable announcing your cache, just uncomment the line below.
-#announce_period 1 day
-
-# TAG: announce_host
-# TAG: announce_file
-# TAG: announce_port
-# announce_host and announce_port set the hostname and port
-# number where the registration message will be sent.
-#
-# Hostname will default to 'tracker.ircache.net' and port will
-# default default to 3131. If the 'filename' argument is given,
-# the contents of that file will be included in the announce
-# message.
-#
-#Default:
-# announce_host tracker.ircache.net
-# announce_port 3131
-
-
-# HTTPD-ACCELERATOR OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: httpd_accel_host
-# TAG: httpd_accel_port
-# If you want to run Squid as an httpd accelerator, define the
-# host name and port number where the real HTTP server is.
-#
-# If you want IP based virtual host support then specify the
-# hostname as "virtual". This will make Squid use the IP address
-# where it accepted the request as hostname in the URL.
-#
-# If you want virtual port support then specify the port as "0".
-#
-# NOTE: enabling httpd_accel_host disables proxy-caching and
-# ICP. If you want these features enabled also, then set
-# the 'httpd_accel_with_proxy' option.
-#
-#Default:
-# httpd_accel_port 80
-
-# TAG: httpd_accel_single_host on|off
-# If you are running Squid as an accelerator and have a single backend
-# server then set this to on. This causes Squid to forward the request
-# to this server irregardles of what any redirectors or Host headers
-# says.
-#
-# Leave this at off if you have multiple backend servers, and use a
-# redirector (or host table or private DNS) to map the requests to the
-# appropriate backend servers. Note that the mapping needs to be a
-# 1-1 mapping between requested and backend (from redirector) domain
-# names or caching will fail, as cacing is performed using the
-# URL returned from the redirector.
-#
-# See also redirect_rewrites_host_header.
-#
-#Default:
-# httpd_accel_single_host off
-
-# TAG: httpd_accel_with_proxy on|off
-# If you want to use Squid as both a local httpd accelerator
-# and as a proxy, change this to 'on'. Note however that your
-# proxy users may have trouble to reach the accelerated domains
-# unless their browsers are configured not to use this proxy for
-# those domains (for example via the no_proxy browser configuration
-# setting)
-#
-#Default:
-# httpd_accel_with_proxy off
-
-# TAG: httpd_accel_uses_host_header on|off
-# HTTP/1.1 requests include a Host: header which is basically the
-# hostname from the URL. The Host: header is used for domain based
-# virutal hosts. If your accelerator needs to provide domain based
-# virtual hosts on the same IP address then you will need to turn this
-# on.
-#
-# Note that Squid does NOT check the value of the Host header matches
-# any of your accelerated server, so it may open a big security hole
-# unless you take care to set up access controls proper. We recommend
-# that this option remain disabled unless you are sure of what you
-# are doing.
-#
-# However, you will need to enable this option if you run Squid
-# as a transparent proxy. Otherwise, virtual servers which
-# require the Host: header will not be properly cached.
-#
-#Default:
-# httpd_accel_uses_host_header off
-
-
-# MISCELLANEOUS
-# -----------------------------------------------------------------------------
-
-# TAG: dns_testnames
-# The DNS tests exit as soon as the first site is successfully looked up
-#
-# This test can be disabled with the -D command line option.
-#
-#Default:
-# dns_testnames netscape.com internic.net nlanr.net microsoft.com
-
-# TAG: logfile_rotate
-# Specifies the number of logfile rotations to make when you
-# type 'squid -k rotate'. The default is 10, which will rotate
-# with extensions 0 through 9. Setting logfile_rotate to 0 will
-# disable the rotation, but the logfiles are still closed and
-# re-opened. This will enable you to rename the logfiles
-# yourself just before sending the rotate signal.
-#
-# Note, the 'squid -k rotate' command normally sends a USR1
-# signal to the running squid process. In certain situations
-# (e.g. on Linux with Async I/O), USR1 is used for other
-# purposes, so -k rotate uses another signal. It is best to get
-# in the habit of using 'squid -k rotate' instead of 'kill -USR1
-# <pid>'.
-#
-#Default:
-# logfile_rotate 0
-
-# TAG: append_domain
-# Appends local domain name to hostnames without any dots in
-# them. append_domain must begin with a period.
-#
-# Be warned that there today is Internet names with no dots in
-# them using only top-domain names, so setting this may
-# cause some Internet sites to become unavailable.
-#
-#Example:
-# append_domain .yourdomain.com
-#
-#Default:
-# none
-
-# TAG: tcp_recv_bufsize (bytes)
-# Size of receive buffer to set for TCP sockets. Probably just
-# as easy to change your kernel's default. Set to zero to use
-# the default buffer size.
-#
-#Default:
-# tcp_recv_bufsize 0 bytes
-
-# TAG: err_html_text
-# HTML text to include in error messages. Make this a "mailto"
-# URL to your admin address, or maybe just a link to your
-# organizations Web page.
-#
-# To include this in your error messages, you must rewrite
-# the error template files (found in the "errors" directory).
-# Wherever you want the 'err_html_text' line to appear,
-# insert a %L tag in the error template file.
-#
-#Default:
-# none
-
-# TAG: deny_info
-# Usage: deny_info err_page_name acl
-# or deny_info http://... acl
-# Example: deny_info ERR_CUSTOM_ACCESS_DENIED bad_guys
-#
-# This can be used to return a ERR_ page for requests which
-# do not pass the 'http_access' rules. A single ACL will cause
-# the http_access check to fail. If a 'deny_info' line exists
-# for that ACL then Squid returns a corresponding error page.
-#
-# You may use ERR_ pages that come with Squid or create your own pages
-# and put them into the configured errors/ directory.
-#
-# Alternatively you can specify an error URL. The browsers will then
-# get redirected (302) to the specified URL. %s in the redirection
-# URL will be replaced by the requested URL.
-#
-# Alternatively you can tell Squid to reset the TCP connection
-# by specifying TCP_RESET.
-#
-#Default:
-# none
-
-# TAG: memory_pools on|off
-# If set, Squid will keep pools of allocated (but unused) memory
-# available for future use. If memory is a premium on your
-# system and you believe your malloc library outperforms Squid
-# routines, disable this.
-#
-#Default:
-# memory_pools on
-
-# TAG: memory_pools_limit (bytes)
-# Used only with memory_pools on:
-# memory_pools_limit 50 MB
-#
-# If set to a non-zero value, Squid will keep at most the specified
-# limit of allocated (but unused) memory in memory pools. All free()
-# requests that exceed this limit will be handled by your malloc
-# library. Squid does not pre-allocate any memory, just safe-keeps
-# objects that otherwise would be free()d. Thus, it is safe to set
-# memory_pools_limit to a reasonably high value even if your
-# configuration will use less memory.
-#
-# If not set (default) or set to zero, Squid will keep all memory it
-# can. That is, there will be no limit on the total amount of memory
-# used for safe-keeping.
-#
-# To disable memory allocation optimization, do not set
-# memory_pools_limit to 0. Set memory_pools to "off" instead.
-#
-# An overhead for maintaining memory pools is not taken into account
-# when the limit is checked. This overhead is close to four bytes per
-# object kept. However, pools may actually _save_ memory because of
-# reduced memory thrashing in your malloc library.
-#
-#Default:
-# none
-
-# TAG: forwarded_for on|off
-# If set, Squid will include your system's IP address or name
-# in the HTTP requests it forwards. By default it looks like
-# this:
-#
-# X-Forwarded-For: 192.1.2.3
-#
-# If you disable this, it will appear as
-#
-# X-Forwarded-For: unknown
-#
-#Default:
-# forwarded_for on
-
-# TAG: log_icp_queries on|off
-# If set, ICP queries are logged to access.log. You may wish
-# do disable this if your ICP load is VERY high to speed things
-# up or to simplify log analysis.
-#
-#Default:
-# log_icp_queries on
-
-# TAG: icp_hit_stale on|off
-# If you want to return ICP_HIT for stale cache objects, set this
-# option to 'on'. If you have sibling relationships with caches
-# in other administrative domains, this should be 'off'. If you only
-# have sibling relationships with caches under your control, then
-# it is probably okay to set this to 'on'.
-# If set to 'on', then your siblings should use the option "allow-miss"
-# on their cache_peer lines for connecting to you.
-#
-#Default:
-# icp_hit_stale off
-
-# TAG: minimum_direct_hops
-# If using the ICMP pinging stuff, do direct fetches for sites
-# which are no more than this many hops away.
-#
-#Default:
-# minimum_direct_hops 4
-
-# TAG: minimum_direct_rtt
-# If using the ICMP pinging stuff, do direct fetches for sites
-# which are no more than this many rtt milliseconds away.
-#
-#Default:
-# minimum_direct_rtt 400
-
-# TAG: cachemgr_passwd
-# Specify passwords for cachemgr operations.
-#
-# Usage: cachemgr_passwd password action action ...
-#
-# Some valid actions are (see cache manager menu for a full list):
-# 5min
-# 60min
-# asndb
-# authenticator
-# cbdata
-# client_list
-# comm_incoming
-# config *
-# counters
-# delay
-# digest_stats
-# dns
-# events
-# filedescriptors
-# fqdncache
-# histograms
-# http_headers
-# info
-# io
-# ipcache
-# mem
-# menu
-# netdb
-# non_peers
-# objects
-# offline_toggle *
-# pconn
-# peer_select
-# redirector
-# refresh
-# server_list
-# shutdown *
-# store_digest
-# storedir
-# utilization
-# via_headers
-# vm_objects
-#
-# * Indicates actions which will not be performed without a
-# valid password, others can be performed if not listed here.
-#
-# To disable an action, set the password to "disable".
-# To allow performing an action without a password, set the
-# password to "none".
-#
-# Use the keyword "all" to set the same password for all actions.
-#
-#Example:
-# cachemgr_passwd secret shutdown
-# cachemgr_passwd lesssssssecret info stats/objects
-# cachemgr_passwd disable all
-#
-#Default:
-# none
-
-# TAG: store_avg_object_size (kbytes)
-# Average object size, used to estimate number of objects your
-# cache can hold. See doc/Release-Notes-1.1.txt. The default is
-# 13 KB.
-#
-#Default:
-# store_avg_object_size 13 KB
-
-# TAG: store_objects_per_bucket
-# Target number of objects per bucket in the store hash table.
-# Lowering this value increases the total number of buckets and
-# also the storage maintenance rate. The default is 50.
-#
-#Default:
-# store_objects_per_bucket 20
-
-# TAG: client_db on|off
-# If you want to disable collecting per-client statistics, then
-# turn off client_db here.
-#
-#Default:
-# client_db on
-
-# TAG: netdb_low
-# TAG: netdb_high
-# The low and high water marks for the ICMP measurement
-# database. These are counts, not percents. The defaults are
-# 900 and 1000. When the high water mark is reached, database
-# entries will be deleted until the low mark is reached.
-#
-#Default:
-# netdb_low 900
-# netdb_high 1000
-
-# TAG: netdb_ping_period
-# The minimum period for measuring a site. There will be at
-# least this much delay between successive pings to the same
-# network. The default is five minutes.
-#
-#Default:
-# netdb_ping_period 5 minutes
-
-# TAG: query_icmp on|off
-# If you want to ask your peers to include ICMP data in their ICP
-# replies, enable this option.
-#
-# If your peer has configured Squid (during compilation) with
-# '--enable-icmp' then that peer will send ICMP pings to origin server
-# sites of the URLs it receives. If you enable this option then the
-# ICP replies from that peer will include the ICMP data (if available).
-# Then, when choosing a parent cache, Squid will choose the parent with
-# the minimal RTT to the origin server. When this happens, the
-# hierarchy field of the access.log will be
-# "CLOSEST_PARENT_MISS". This option is off by default.
-#
-#Default:
-# query_icmp off
-
-# TAG: test_reachability on|off
-# When this is 'on', ICP MISS replies will be ICP_MISS_NOFETCH
-# instead of ICP_MISS if the target host is NOT in the ICMP
-# database, or has a zero RTT.
-#
-#Default:
-# test_reachability off
-
-# TAG: buffered_logs on|off
-# cache.log log file is written with stdio functions, and as such
-# it can be buffered or unbuffered. By default it will be unbuffered.
-# Buffering it can speed up the writing slightly (though you are
-# unlikely to need to worry unless you run with tons of debugging
-# enabled in which case performance will suffer badly anyway..).
-#
-#Default:
-# buffered_logs off
-
-# TAG: reload_into_ims on|off
-# When you enable this option, client no-cache or ``reload''
-# requests will be changed to If-Modified-Since requests.
-# Doing this VIOLATES the HTTP standard. Enabling this
-# feature could make you liable for problems which it
-# causes.
-#
-# see also refresh_pattern for a more selective approach.
-#
-#Default:
-# reload_into_ims off
-
-# TAG: always_direct
-# Usage: always_direct allow|deny [!]aclname ...
-#
-# Here you can use ACL elements to specify requests which should
-# ALWAYS be forwarded directly to origin servers. For example,
-# to always directly forward requests for local servers use
-# something like:
-#
-# acl local-servers dstdomain my.domain.net
-# always_direct allow local-servers
-#
-# To always forward FTP requests directly, use
-#
-# acl FTP proto FTP
-# always_direct allow FTP
-#
-# NOTE: There is a similar, but opposite option named
-# 'never_direct'. You need to be aware that "always_direct deny
-# foo" is NOT the same thing as "never_direct allow foo". You
-# may need to use a deny rule to exclude a more-specific case of
-# some other rule. Example:
-#
-# acl local-external dstdomain external.foo.net
-# acl local-servers dstdomain .foo.net
-# always_direct deny local-external
-# always_direct allow local-servers
-#
-# This option replaces some v1.1 options such as local_domain
-# and local_ip.
-#
-#Default:
-# none
-
-# TAG: never_direct
-# Usage: never_direct allow|deny [!]aclname ...
-#
-# never_direct is the opposite of always_direct. Please read
-# the description for always_direct if you have not already.
-#
-# With 'never_direct' you can use ACL elements to specify
-# requests which should NEVER be forwarded directly to origin
-# servers. For example, to force the use of a proxy for all
-# requests, except those in your local domain use something like:
-#
-# acl local-servers dstdomain .foo.net
-# acl all src 0.0.0.0/0.0.0.0
-# never_direct deny local-servers
-# never_direct allow all
-#
-# or if squid is inside a firewall and there is local intranet
-# servers inside the firewall then use something like:
-#
-# acl local-intranet dstdomain .foo.net
-# acl local-external dstdomain external.foo.net
-# always_direct deny local-external
-# always_direct allow local-intranet
-# never_direct allow all
-#
-# This option replaces some v1.1 options such as inside_firewall
-# and firewall_ip.
-#
-#Default:
-# none
-
-# TAG: header_access
-# Usage: header_access header_name allow|deny [!]aclname ...
-#
-# WARNING: Doing this VIOLATES the HTTP standard. Enabling
-# this feature could make you liable for problems which it
-# causes.
-#
-# This option replaces the old 'anonymize_headers' and the
-# older 'http_anonymizer' option with something that is much
-# more configurable. This new method creates a list of ACLs
-# for each header, allowing you very fine-tuned header
-# mangling.
-#
-# You can only specify known headers for the header name.
-# Other headers are reclassified as 'Other'. You can also
-# refer to all the headers with 'All'.
-#
-# For example, to achieve the same behaviour as the old
-# 'http_anonymizer standard' option, you should use:
-#
-# header_access From deny all
-# header_access Referer deny all
-# header_access Server deny all
-# header_access User-Agent deny all
-# header_access WWW-Authenticate deny all
-# header_access Link deny all
-#
-# Or, to reproduce the old 'http_anonymizer paranoid' feature
-# you should use:
-#
-# header_access Allow allow all
-# header_access Authorization allow all
-# header_access WWW-Authenticate allow all
-# header_access Cache-Control allow all
-# header_access Content-Encoding allow all
-# header_access Content-Length allow all
-# header_access Content-Type allow all
-# header_access Date allow all
-# header_access Expires allow all
-# header_access Host allow all
-# header_access If-Modified-Since allow all
-# header_access Last-Modified allow all
-# header_access Location allow all
-# header_access Pragma allow all
-# header_access Accept allow all
-# header_access Accept-Charset allow all
-# header_access Accept-Encoding allow all
-# header_access Accept-Language allow all
-# header_access Content-Language allow all
-# header_access Mime-Version allow all
-# header_access Retry-After allow all
-# header_access Title allow all
-# header_access Connection allow all
-# header_access Proxy-Connection allow all
-# header_access All deny all
-#
-# By default, all headers are allowed (no anonymizing is
-# performed).
-#
-#Default:
-# none
-
-# TAG: header_replace
-# Usage: header_replace header_name message
-# Example: header_replace User-Agent Nutscrape/1.0 (CP/M; 8-bit)
-#
-# This option allows you to change the contents of headers
-# denied with header_access above, by replacing them with
-# some fixed string. This replaces the old fake_user_agent
-# option.
-#
-# By default, headers are removed if denied.
-#
-#Default:
-# none
-
-# TAG: icon_directory
-# Where the icons are stored. These are normally kept in
-# /usr/share/squid/icons
-#
-#Default:
-# icon_directory /usr/share/squid/icons
-
-# TAG: short_icon_urls
-# If this is enabled then Squid will use short URLs for icons.
-#
-# If off then the URLs for icons will always be absolute URLs
-# including the proxy name and port.
-#
-#Default:
-# short_icon_urls off
-
-# TAG: error_directory
-# If you wish to create your own versions of the default
-# (English) error files, either to customize them to suit your
-# language or company copy the template English files to another
-# directory and point this tag at them.
-#
-#Default:
-# error_directory /usr/share/squid/errors/English
-
-# TAG: maximum_single_addr_tries
-# This sets the maximum number of connection attempts for a
-# host that only has one address (for multiple-address hosts,
-# each address is tried once).
-#
-# The default value is one attempt, the (not recommended)
-# maximum is 255 tries. A warning message will be generated
-# if it is set to a value greater than ten.
-#
-# Note: This is in addition to the request reforwarding which
-# takes place if Squid fails to get a satisfying response.
-#
-#Default:
-# maximum_single_addr_tries 1
-
-# TAG: snmp_port
-# Squid can now serve statistics and status information via SNMP.
-# By default it listens to port 3401 on the machine. If you don't
-# wish to use SNMP, set this to "0".
-#
-#Default:
-# snmp_port 3401
-
-# TAG: snmp_access
-# Allowing or denying access to the SNMP port.
-#
-# All access to the agent is denied by default.
-# usage:
-#
-# snmp_access allow|deny [!]aclname ...
-#
-#Example:
-# snmp_access allow snmppublic localhost
-# snmp_access deny all
-#
-#Default:
-# snmp_access deny all
-
-# TAG: snmp_incoming_address
-# TAG: snmp_outgoing_address
-# Just like 'udp_incoming_address' above, but for the SNMP port.
-#
-# snmp_incoming_address is used for the SNMP socket receiving
-# messages from SNMP agents.
-# snmp_outgoing_address is used for SNMP packets returned to SNMP
-# agents.
-#
-# The default snmp_incoming_address (0.0.0.0) is to listen on all
-# available network interfaces.
-#
-# If snmp_outgoing_address is set to 255.255.255.255 (the default)
-# then it will use the same socket as snmp_incoming_address. Only
-# change this if you want to have SNMP replies sent using another
-# address than where this Squid listens for SNMP queries.
-#
-# NOTE, snmp_incoming_address and snmp_outgoing_address can not have
-# the same value since they both use port 3401.
-#
-#Default:
-# snmp_incoming_address 0.0.0.0
-# snmp_outgoing_address 255.255.255.255
-
-# TAG: as_whois_server
-# WHOIS server to query for AS numbers. NOTE: AS numbers are
-# queried only when Squid starts up, not for every request.
-#
-#Default:
-# as_whois_server whois.ra.net
-# as_whois_server whois.ra.net
-
-# TAG: wccp_router
-# Use this option to define your WCCP ``home'' router for
-# Squid. Setting the 'wccp_router' to 0.0.0.0 (the default)
-# disables WCCP.
-#
-#Default:
-# wccp_router 0.0.0.0
-
-# TAG: wccp_version
-# According to some users, Cisco IOS 11.2 only supports WCCP
-# version 3. If you're using that version of IOS, change
-# this value to 3.
-#
-#Default:
-# wccp_version 4
-
-# TAG: wccp_incoming_address
-# TAG: wccp_outgoing_address
-# wccp_incoming_address Use this option if you require WCCP
-# messages to be received on only one
-# interface. Do NOT use this option if
-# you're unsure how many interfaces you
-# have, or if you know you have only one
-# interface.
-#
-# wccp_outgoing_address Use this option if you require WCCP
-# messages to be sent out on only one
-# interface. Do NOT use this option if
-# you're unsure how many interfaces you
-# have, or if you know you have only one
-# interface.
-#
-# The default behavior is to not bind to any specific address.
-#
-# NOTE, wccp_incoming_address and wccp_outgoing_address can not have
-# the same value since they both use port 2048.
-#
-#Default:
-# wccp_incoming_address 0.0.0.0
-# wccp_outgoing_address 255.255.255.255
-
-
-# DELAY POOL PARAMETERS (all require DELAY_POOLS compilation option)
-# -----------------------------------------------------------------------------
-
-# TAG: delay_pools
-# This represents the number of delay pools to be used. For example,
-# if you have one class 2 delay pool and one class 3 delays pool, you
-# have a total of 2 delay pools.
-#
-#Default:
-# delay_pools 0
-
-# TAG: delay_class
-# This defines the class of each delay pool. There must be exactly one
-# delay_class line for each delay pool. For example, to define two
-# delay pools, one of class 2 and one of class 3, the settings above
-# and here would be:
-#
-#Example:
-# delay_pools 2 # 2 delay pools
-# delay_class 1 2 # pool 1 is a class 2 pool
-# delay_class 2 3 # pool 2 is a class 3 pool
-#
-# The delay pool classes are:
-#
-# class 1 Everything is limited by a single aggregate
-# bucket.
-#
-# class 2 Everything is limited by a single aggregate
-# bucket as well as an "individual" bucket chosen
-# from bits 25 through 32 of the IP address.
-#
-# class 3 Everything is limited by a single aggregate
-# bucket as well as a "network" bucket chosen
-# from bits 17 through 24 of the IP address and a
-# "individual" bucket chosen from bits 17 through
-# 32 of the IP address.
-#
-# NOTE: If an IP address is a.b.c.d
-# -> bits 25 through 32 are "d"
-# -> bits 17 through 24 are "c"
-# -> bits 17 through 32 are "c * 256 + d"
-#
-#Default:
-# none
-
-# TAG: delay_access
-# This is used to determine which delay pool a request falls into.
-# The first matched delay pool is always used, i.e., if a request falls
-# into delay pool number one, no more delay are checked, otherwise the
-# rest are checked in order of their delay pool number until they have
-# all been checked. For example, if you want some_big_clients in delay
-# pool 1 and lotsa_little_clients in delay pool 2:
-#
-#Example:
-# delay_access 1 allow some_big_clients
-# delay_access 1 deny all
-# delay_access 2 allow lotsa_little_clients
-# delay_access 2 deny all
-#
-#Default:
-# none
-
-# TAG: delay_parameters
-# This defines the parameters for a delay pool. Each delay pool has
-# a number of "buckets" associated with it, as explained in the
-# description of delay_class. For a class 1 delay pool, the syntax is:
-#
-#delay_parameters pool aggregate
-#
-# For a class 2 delay pool:
-#
-#delay_parameters pool aggregate individual
-#
-# For a class 3 delay pool:
-#
-#delay_parameters pool aggregate network individual
-#
-# The variables here are:
-#
-# pool a pool number - ie, a number between 1 and the
-# number specified in delay_pools as used in
-# delay_class lines.
-#
-# aggregate the "delay parameters" for the aggregate bucket
-# (class 1, 2, 3).
-#
-# individual the "delay parameters" for the individual
-# buckets (class 2, 3).
-#
-# network the "delay parameters" for the network buckets
-# (class 3).
-#
-# A pair of delay parameters is written restore/maximum, where restore is
-# the number of bytes (not bits - modem and network speeds are usually
-# quoted in bits) per second placed into the bucket, and maximum is the
-# maximum number of bytes which can be in the bucket at any time.
-#
-# For example, if delay pool number 1 is a class 2 delay pool as in the
-# above example, and is being used to strictly limit each host to 64kbps
-# (plus overheads), with no overall limit, the line is:
-#
-#delay_parameters 1 -1/-1 8000/8000
-#
-# Note that the figure -1 is used to represent "unlimited".
-#
-# And, if delay pool number 2 is a class 3 delay pool as in the above
-# example, and you want to limit it to a total of 256kbps (strict limit)
-# with each 8-bit network permitted 64kbps (strict limit) and each
-# individual host permitted 4800bps with a bucket maximum size of 64kb
-# to permit a decent web page to be downloaded at a decent speed
-# (if the network is not being limited due to overuse) but slow down
-# large downloads more significantly:
-#
-#delay_parameters 2 32000/32000 8000/8000 600/8000
-#
-# There must be one delay_parameters line for each delay pool.
-#
-#Default:
-# none
-
-# TAG: delay_initial_bucket_level (percent, 0-100)
-# The initial bucket percentage is used to determine how much is put
-# in each bucket when squid starts, is reconfigured, or first notices
-# a host accessing it (in class 2 and class 3, individual hosts and
-# networks only have buckets associated with them once they have been
-# "seen" by squid).
-#
-#Default:
-# delay_initial_bucket_level 50
-
-# TAG: incoming_icp_average
-# TAG: incoming_http_average
-# TAG: incoming_dns_average
-# TAG: min_icp_poll_cnt
-# TAG: min_dns_poll_cnt
-# TAG: min_http_poll_cnt
-# Heavy voodoo here. I can't even believe you are reading this.
-# Are you crazy? Don't even think about adjusting these unless
-# you understand the algorithms in comm_select.c first!
-#
-#Default:
-# incoming_icp_average 6
-# incoming_http_average 4
-# incoming_dns_average 4
-# min_icp_poll_cnt 8
-# min_dns_poll_cnt 8
-# min_http_poll_cnt 8
-
-# TAG: max_open_disk_fds
-# To avoid having disk as the I/O bottleneck Squid can optionally
-# bypass the on-disk cache if more than this amount of disk file
-# descriptors are open.
-#
-# A value of 0 indicates no limit.
-#
-#Default:
-# max_open_disk_fds 0
-
-# TAG: offline_mode
-# Enable this option and Squid will never try to validate cached
-# objects.
-#
-#Default:
-# offline_mode off
-
-# TAG: uri_whitespace
-# What to do with requests that have whitespace characters in the
-# URI. Options:
-#
-# strip: The whitespace characters are stripped out of the URL.
-# This is the behavior recommended by RFC2396.
-# deny: The request is denied. The user receives an "Invalid
-# Request" message.
-# allow: The request is allowed and the URI is not changed. The
-# whitespace characters remain in the URI. Note the
-# whitespace is passed to redirector processes if they
-# are in use.
-# encode: The request is allowed and the whitespace characters are
-# encoded according to RFC1738. This could be considered
-# a violation of the HTTP/1.1
-# RFC because proxies are not allowed to rewrite URI's.
-# chop: The request is allowed and the URI is chopped at the
-# first whitespace. This might also be considered a
-# violation.
-#
-#Default:
-# uri_whitespace strip
-
-# TAG: broken_posts
-# A list of ACL elements which, if matched, causes Squid to send
-# an extra CRLF pair after the body of a PUT/POST request.
-#
-# Some HTTP servers has broken implementations of PUT/POST,
-# and rely on an extra CRLF pair sent by some WWW clients.
-#
-# Quote from RFC 2068 section 4.1 on this matter:
-#
-# Note: certain buggy HTTP/1.0 client implementations generate an
-# extra CRLF's after a POST request. To restate what is explicitly
-# forbidden by the BNF, an HTTP/1.1 client must not preface or follow
-# a request with an extra CRLF.
-#
-#Example:
-# acl buggy_server url_regex ^http://....
-# broken_posts allow buggy_server
-#
-#Default:
-# none
-
-# TAG: mcast_miss_addr
-# Note: This option is only available if Squid is rebuilt with the
-# -DMULTICAST_MISS_STREAM option
-#
-# If you enable this option, every "cache miss" URL will
-# be sent out on the specified multicast address.
-#
-# Do not enable this option unless you are are absolutely
-# certain you understand what you are doing.
-#
-#Default:
-# mcast_miss_addr 255.255.255.255
-
-# TAG: mcast_miss_ttl
-# Note: This option is only available if Squid is rebuilt with the
-# -DMULTICAST_MISS_TTL option
-#
-# This is the time-to-live value for packets multicasted
-# when multicasting off cache miss URLs is enabled. By
-# default this is set to 'site scope', i.e. 16.
-#
-#Default:
-# mcast_miss_ttl 16
-
-# TAG: mcast_miss_port
-# Note: This option is only available if Squid is rebuilt with the
-# -DMULTICAST_MISS_STREAM option
-#
-# This is the port number to be used in conjunction with
-# 'mcast_miss_addr'.
-#
-#Default:
-# mcast_miss_port 3135
-
-# TAG: mcast_miss_encode_key
-# Note: This option is only available if Squid is rebuilt with the
-# -DMULTICAST_MISS_STREAM option
-#
-# The URLs that are sent in the multicast miss stream are
-# encrypted. This is the encryption key.
-#
-#Default:
-# mcast_miss_encode_key XXXXXXXXXXXXXXXX
-
-# TAG: nonhierarchical_direct
-# By default, Squid will send any non-hierarchical requests
-# (matching hierarchy_stoplist or not cachable request type) direct
-# to origin servers.
-#
-# If you set this to off, then Squid will prefer to send these
-# requests to parents.
-#
-# Note that in most configurations, by turning this off you will only
-# add latency to these request without any improvement in global hit
-# ratio.
-#
-# If you are inside an firewall then see never_direct instead of
-# this directive.
-#
-#Default:
-# nonhierarchical_direct on
-
-# TAG: prefer_direct
-# Normally Squid tries to use parents for most requests. If you by some
-# reason like it to first try going direct and only use a parent if
-# going direct fails then set this to on.
-#
-# By combining nonhierarchical_direct off and prefer_direct on you
-# can set up Squid to use a parent as a backup path if going direct
-# fails.
-#
-# Note: If you want Squid to use parents for all requests then see
-# the never_direct directive. prefer_direct only modifies how Squid
-# acts on cachable requests.
-#
-#Default:
-# prefer_direct off
-
-# TAG: strip_query_terms
-# By default, Squid strips query terms from requested URLs before
-# logging. This protects your user's privacy.
-#
-#Default:
-# strip_query_terms on
-
-# TAG: coredump_dir
-# By default Squid leaves core files in the directory from where
-# it was started. If you set 'coredump_dir' to a directory
-# that exists, Squid will chdir() to that directory at startup
-# and coredump files will be left there.
-#
-#Default:
-# coredump_dir none
-#
-# Leave coredumps in the first cache dir
-coredump_dir /var/spool/squid
-
-# TAG: redirector_bypass
-# When this is 'on', a request will not go through the
-# redirector if all redirectors are busy. If this is 'off'
-# and the redirector queue grows too large, Squid will exit
-# with a FATAL error and ask you to increase the number of
-# redirectors. You should only enable this if the redirectors
-# are not critical to your caching system. If you use
-# redirectors for access control, and you enable this option,
-# then users may have access to pages that they should not
-# be allowed to request.
-#
-#Default:
-# redirector_bypass off
-
-# TAG: ignore_unknown_nameservers
-# By default Squid checks that DNS responses are received
-# from the same IP addresses that they are sent to. If they
-# don't match, Squid ignores the response and writes a warning
-# message to cache.log. You can allow responses from unknown
-# nameservers by setting this option to 'off'.
-#
-#Default:
-# ignore_unknown_nameservers on
-
-# TAG: digest_generation
-# This controls whether the server will generate a Cache Digest
-# of its contents. By default, Cache Digest generation is
-# enabled if Squid is compiled with USE_CACHE_DIGESTS defined.
-#
-#Default:
-# digest_generation on
-
-# TAG: digest_bits_per_entry
-# This is the number of bits of the server's Cache Digest which
-# will be associated with the Digest entry for a given HTTP
-# Method and URL (public key) combination. The default is 5.
-#
-#Default:
-# digest_bits_per_entry 5
-
-# TAG: digest_rebuild_period (seconds)
-# This is the number of seconds between Cache Digest rebuilds.
-#
-#Default:
-# digest_rebuild_period 1 hour
-
-# TAG: digest_rewrite_period (seconds)
-# This is the number of seconds between Cache Digest writes to
-# disk.
-#
-#Default:
-# digest_rewrite_period 1 hour
-
-# TAG: digest_swapout_chunk_size (bytes)
-# This is the number of bytes of the Cache Digest to write to
-# disk at a time. It defaults to 4096 bytes (4KB), the Squid
-# default swap page.
-#
-#Default:
-# digest_swapout_chunk_size 4096 bytes
-
-# TAG: digest_rebuild_chunk_percentage (percent, 0-100)
-# This is the percentage of the Cache Digest to be scanned at a
-# time. By default it is set to 10% of the Cache Digest.
-#
-#Default:
-# digest_rebuild_chunk_percentage 10
-
-# TAG: chroot
-# Use this to have Squid do a chroot() while initializing. This
-# also causes Squid to fully drop root privileges after
-# initializing. This means, for example, that if you use a HTTP
-# port less than 1024 and try to reconfigure, you will get an
-# error.
-#
-#Default:
-# none
-
-# TAG: client_persistent_connections
-# TAG: server_persistent_connections
-# Persistent connection support for clients and servers. By
-# default, Squid uses persistent connections (when allowed)
-# with its clients and servers. You can use these options to
-# disable persistent connections with clients and/or servers.
-#
-#Default:
-# client_persistent_connections on
-# server_persistent_connections on
-
-# TAG: detect_broken_pconn
-# Some servers have been found to incorrectly signal the use
-# of HTTP/1.0 persistent connections even on replies not
-# compatible, causing significant delays. This server problem
-# has mostly been seen on redirects.
-#
-# By enabling this directive Squid attempts to detect such
-# broken replies and automatically assume the reply is finished
-# after 10 seconds timeout.
-#
-#Default:
-# detect_broken_pconn off
-
-# TAG: pipeline_prefetch
-# To boost the performance of pipelined requests to closer
-# match that of a non-proxied environment Squid can try to fetch
-# up to two requests in parallell from a pipeline.
-#
-# Defaults to off for bandwidth management and access logging
-# reasons.
-#
-#Default:
-# pipeline_prefetch off
-
-# TAG: extension_methods
-# Squid only knows about standardized HTTP request methods.
-# You can add up to 20 additional "extension" methods here.
-#
-#Default:
-# none
-
-# TAG: request_entities
-# Squid defaults to deny GET and HEAD requests with request entities,
-# as the meaning of such requests are undefined in the HTTP standard
-# even if not explicitly forbidden.
-#
-# Set this directive to on if you have clients which insists
-# on sending request entities in GET or HEAD requests.
-#
-#Default:
-# request_entities off
-
-# TAG: high_response_time_warning (msec)
-# If the one-minute median response time exceeds this value,
-# Squid prints a WARNING with debug level 0 to get the
-# administrators attention. The value is in milliseconds.
-#
-#Default:
-# high_response_time_warning 0
-
-# TAG: high_page_fault_warning
-# If the one-minute average page fault rate exceeds this
-# value, Squid prints a WARNING with debug level 0 to get
-# the administrators attention. The value is in page faults
-# per second.
-#
-#Default:
-# high_page_fault_warning 0
-
-# TAG: high_memory_warning
-# If the memory usage (as determined by mallinfo) exceeds
-# value, Squid prints a WARNING with debug level 0 to get
-# the administrators attention.
-#
-#Default:
-# high_memory_warning 0
-
-# TAG: store_dir_select_algorithm
-# Set this to 'round-robin' as an alternative.
-#
-#Default:
-# store_dir_select_algorithm least-load
-
-# TAG: forward_log
-# Note: This option is only available if Squid is rebuilt with the
-# -DWIP_FWD_LOG option
-#
-# Logs the server-side requests.
-#
-# This is currently work in progress.
-#
-#Default:
-# none
-
-# TAG: ie_refresh on|off
-# Microsoft Internet Explorer up until version 5.5 Service
-# Pack 1 has an issue with transparent proxies, wherein it
-# is impossible to force a refresh. Turning this on provides
-# a partial fix to the problem, by causing all IMS-REFRESH
-# requests from older IE versions to check the origin server
-# for fresh content. This reduces hit ratio by some amount
-# (~10% in my experience), but allows users to actually get
-# fresh content when they want it. Note that because Squid
-# cannot tell if the user is using 5.5 or 5.5SP1, the behavior
-# of 5.5 is unchanged from old versions of Squid (i.e. a
-# forced refresh is impossible). Newer versions of IE will,
-# hopefully, continue to have the new behavior and will be
-# handled based on that assumption. This option defaults to
-# the old Squid behavior, which is better for hit ratios but
-# worse for clients using IE, if they need to be able to
-# force fresh content.
-#
-#Default:
-# ie_refresh off
-
-# TAG: vary_ignore_expire on|off
-# Many HTTP servers supporting Vary gives such objects
-# immediate expiry time with no cache-control header
-# when requested by a HTTP/1.0 client. This option
-# enables Squid to ignore such expiry times until
-# HTTP/1.1 is fully implemented.
-# WARNING: This may eventually cause some varying
-# objects not intended for caching to get cached.
-#
-#Default:
-# vary_ignore_expire off
-
-# TAG: sleep_after_fork (microseconds)
-# When this is set to a non-zero value, the main Squid process
-# sleeps the specified number of microseconds after a fork()
-# system call. This sleep may help the situation where your
-# system reports fork() failures due to lack of (virtual)
-# memory. Note, however, that if you have a lot of child
-# processes, then these sleep delays will add up and your
-# Squid will not service requests for some amount of time
-# until all the child processes have been started.
-#
-#Default:
-# sleep_after_fork 0
-
diff --git a/contrib/altlinux/init.ldif b/contrib/altlinux/init.ldif
+++ /dev/null
@@ -1,124 +0,0 @@
-dn: dc=example,dc=com
-objectClass: top
-objectClass: dcObject
-objectClass: organization
-objectClass: gosaDepartment
-dc: example
-o: Example Inc.
-ou: example
-description: Main building
-
-dn: ou=Apps,dc=example,dc=com
-objectClass: organizationalUnit
-ou: Apps
-
-dn: cn=gosa,ou=Apps,dc=example,dc=com
-objectClass: top
-objectClass: applicationProcess
-objectClass: simpleSecurityObject
-userPassword: gosa
-cn: gosa
-
-dn: cn=smbpasswd,ou=Apps,dc=example,dc=com
-objectClass: top
-objectClass: applicationProcess
-objectClass: simpleSecurityObject
-cn: smbpasswd
-userPassword: smbpasswd
-
-dn: cn=cyrus,ou=Apps,dc=example,dc=com
-objectClass: top
-objectClass: applicationProcess
-objectClass: simpleSecurityObject
-cn: cyrus
-userPassword: cyrus
-
-dn: cn=saslauthd,ou=Apps,dc=example,dc=com
-objectClass: top
-objectClass: applicationProcess
-objectClass: simpleSecurityObject
-cn: saslauthd
-userPassword: saslauthd
-
-dn: ou=Admins,dc=example,dc=com
-objectClass: organizationalUnit
-ou: Admins
-description: Directory administrators
-
-dn: cn=admin,ou=Admins,dc=example,dc=com
-objectClass: person
-cn: admin
-sn: admin
-userPassword: secret
-
-dn: ou=People,dc=example,dc=com
-objectClass: organizationalUnit
-ou: People
-
-dn: uid=administrator,ou=People,dc=example,dc=com
-objectClass: top
-objectClass: person
-objectClass: organizationalPerson
-objectClass: inetOrgPerson
-objectClass: gosaAccount
-userPassword: secret
-sn: System
-cn: administrator
-givenName: Administrator
-uid: administrator
-
-dn: ou=Groups,dc=example,dc=com
-objectClass: organizationalUnit
-ou: Groups
-
-dn: cn=administrator,ou=Groups,dc=example,dc=com
-objectClass: top
-objectClass: gosaObject
-objectClass: posixGroup
-gosaSubtreeACL:: OmFsbA==
-cn: administrator
-gidNumber: 999
-memberUid: administrator
-
-dn: ou=Computers,dc=example,dc=com
-objectClass: organizationalUnit
-ou: Computers
-
-dn: uid=pdc$,ou=Computers,dc=example,dc=com
-objectClass: top
-objectClass: account
-objectClass: goImapServer
-uid: pdc$
-cn: localhost
-goImapName: mail.example.lan
-goImapConnect: {localhost:143}
-goImapAdmin: cyrus
-goImapSieveServer: localhost
-goImapSievePort: 2000
-goImapPassword: cyrus
-
-dn: dc=branch,dc=example,dc=com
-objectClass: top
-objectClass: dcObject
-objectClass: organizationalUnit
-objectClass: gosaDepartment
-dc: branch
-ou: branch
-description: Remote branch
-
-dn: ou=Addressbook,dc=example,dc=com
-objectClass: organizationalUnit
-ou: Addressbook
-
-dn: ou=Systems,dc=example,dc=com
-objectClass: organizationalUnit
-ou: Systems
-
-dn: ou=configs,ou=systems,dc=example,dc=com
-objectClass: organizationalUnit
-ou: configs
-
-dn: ou=gosa,ou=configs,ou=systems,dc=example,dc=com
-objectClass: organizationalUnit
-ou: gosa
-