Deleted `src/stamp-h1.in', `src/config.h.in' and `INSTALL' in trunk

diff --git a/INSTALL b/INSTALL
deleted file mode 100644 (file)
index da55609..0000000
--- a/INSTALL
+++ /dev/null
@@ -1,181 +0,0 @@
-Basic Installation
-==================
-
-   These are generic installation instructions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
-
-   The file `configure.in' is used to create `configure' by a program
-called `autoconf'.  You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  You can give `configure'
-initial values for variables by setting them in the environment.  Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
-     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
-
-Or on systems that have the `env' program, you can do it like this:
-     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory.  After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
-
-Installation Names
-==================
-
-   By default, `make install' will install the package's files in
-`/opt/collectd'.  You can specify an installation prefix other than
-`/opt/collectd' by giving `configure' the option `--prefix=PATH'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on.  Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
-     CPU-COMPANY-SYSTEM
-
-See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
-
-   If you are building compiler tools for cross-compiling, you can also
-use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Operation Controls
-==================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--cache-file=FILE'
-     Use and save the results of the tests in FILE instead of
-     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
-     debugging `configure'.
-
-`--help'
-     Print a summary of the options to `configure', and exit.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`--version'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`configure' also accepts some other, not widely useful, options.

diff --git a/src/config.h.in b/src/config.h.in
deleted file mode 100644 (file)
index 33baece..0000000
--- a/src/config.h.in
+++ /dev/null
@@ -1,277 +0,0 @@
-/* src/config.h.in.  Generated from configure.in by autoheader.  */
-
-/* Wether or not to collect CPU usage statistics */
-#undef COLLECT_CPU
-
-/* Wether or not to collect cpu frequency statistics */
-#undef COLLECT_CPUFREQ
-
-/* Wether or not to collect diskstats */
-#undef COLLECT_DISK
-
-/* Wether or not to collect hdd temperature statistics */
-#undef COLLECT_HDDTEMP
-
-/* Wether or not to collect system load statistics */
-#undef COLLECT_LOAD
-
-/* Wether or not to collect memory statistics */
-#undef COLLECT_MEMORY
-
-/* Wether or not to collect nfs statistics */
-#undef COLLECT_NFS
-
-/* Wether or not to collect ping statistics */
-#undef COLLECT_PING
-
-/* Wether or not to collect processes statistics */
-#undef COLLECT_PROCESSES
-
-/* Wether or not to collect lm_sensors statistics */
-#undef COLLECT_SENSORS
-
-/* Wether or not to collect serial statistics */
-#undef COLLECT_SERIAL
-
-/* Wether or not to collect swap statistics */
-#undef COLLECT_SWAP
-
-/* Wether or not to collect tape statistics */
-#undef COLLECT_TAPE
-
-/* Wether or not to collect network traffic statistics */
-#undef COLLECT_TRAFFIC
-
-/* Wether or not to collect user count statistics */
-#undef COLLECT_USERS
-
-/* Define to 1 if you have the <arpa/inet.h> header file. */
-#undef HAVE_ARPA_INET_H
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the <errno.h> header file. */
-#undef HAVE_ERRNO_H
-
-/* Define to 1 if you have the <fcntl.h> header file. */
-#undef HAVE_FCNTL_H
-
-/* Define to 1 if you have the `gethostbyname' function. */
-#undef HAVE_GETHOSTBYNAME
-
-/* Define to 1 if you have the `getloadavg' function. */
-#undef HAVE_GETLOADAVG
-
-/* Define to 1 if you have the `gettimeofday' function. */
-#undef HAVE_GETTIMEOFDAY
-
-/* Define to 1 if you have the `getutent' function. */
-#undef HAVE_GETUTENT
-
-/* Define to 1 if you have the `getutxent' function. */
-#undef HAVE_GETUTXENT
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the <kstat.h> header file. */
-#undef HAVE_KSTAT_H
-
-/* Define to 1 if you have the `devinfo' library (-ldevinfo). */
-#undef HAVE_LIBDEVINFO
-
-/* Define to 1 if you have the `devstat' library (-ldevstat). */
-#undef HAVE_LIBDEVSTAT
-
-/* Define to 1 if you have the `dl' library (-ldl). */
-#undef HAVE_LIBDL
-
-/* Define to 1 if you have the `kstat' library (-lkstat). */
-#undef HAVE_LIBKSTAT
-
-/* Define to 1 if you have the `kvm' library (-lkvm). */
-#undef HAVE_LIBKVM
-
-/* Define to 1 if you have the `m' library (-lm). */
-#undef HAVE_LIBM
-
-/* Define to 1 if you have the `nsl' library (-lnsl). */
-#undef HAVE_LIBNSL
-
-/* Define to 1 if you have the `resolv' library (-lresolv). */
-#undef HAVE_LIBRESOLV
-
-/* Define to 1 if you have the `rrd' library (-lrrd). */
-#undef HAVE_LIBRRD
-
-/* Define to 1 if you have the sensors library (-lsensors). */
-#undef HAVE_LIBSENSORS
-
-/* Define to 1 if you have the `socket' library (-lsocket). */
-#undef HAVE_LIBSOCKET
-
-/* Define to 1 if you have the `statgrab' library (-lstatgrab). */
-#undef HAVE_LIBSTATGRAB
-
-/* Define to 1 if you have the `memcpy' function. */
-#undef HAVE_MEMCPY
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the <netdb.h> header file. */
-#undef HAVE_NETDB_H
-
-/* Define to 1 if you have the <netinet/in.h> header file. */
-#undef HAVE_NETINET_IN_H
-
-/* Define to 1 if you have the <rrd.h> header file. */
-#undef HAVE_RRD_H
-
-/* Define to 1 if you have the `select' function. */
-#undef HAVE_SELECT
-
-/* Define to 1 if you have the <sensors/sensors.h> header file. */
-#undef HAVE_SENSORS_SENSORS_H
-
-/* Define to 1 if you have the <signal.h> header file. */
-#undef HAVE_SIGNAL_H
-
-/* Define to 1 if you have the `socket' function. */
-#undef HAVE_SOCKET
-
-/* Define to 1 if you have the <statgrab.h> header file. */
-#undef HAVE_STATGRAB_H
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the `strcasecmp' function. */
-#undef HAVE_STRCASECMP
-
-/* Define to 1 if you have the `strchr' function. */
-#undef HAVE_STRCHR
-
-/* Define to 1 if you have the `strcmp' function. */
-#undef HAVE_STRCMP
-
-/* Define to 1 if you have the `strdup' function. */
-#undef HAVE_STRDUP
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the `strlen' function. */
-#undef HAVE_STRLEN
-
-/* Define to 1 if you have the `strncasecmp' function. */
-#undef HAVE_STRNCASECMP
-
-/* Define to 1 if you have the `strncmp' function. */
-#undef HAVE_STRNCMP
-
-/* Define to 1 if you have the `strncpy' function. */
-#undef HAVE_STRNCPY
-
-/* Define to 1 if you have the `strstr' function. */
-#undef HAVE_STRSTR
-
-/* Define to 1 if you have the `strtol' function. */
-#undef HAVE_STRTOL
-
-/* Define to 1 if you have the `sysctlbyname' function. */
-#undef HAVE_SYSCTLBYNAME
-
-/* Define to 1 if you have the <syslog.h> header file. */
-#undef HAVE_SYSLOG_H
-
-/* Define to 1 if you have the <sys/dkstat.h> header file. */
-#undef HAVE_SYS_DKSTAT_H
-
-/* Define to 1 if you have the <sys/loadavg.h> header file. */
-#undef HAVE_SYS_LOADAVG_H
-
-/* Define to 1 if you have the <sys/resource.h> header file. */
-#undef HAVE_SYS_RESOURCE_H
-
-/* Define to 1 if you have the <sys/select.h> header file. */
-#undef HAVE_SYS_SELECT_H
-
-/* Define to 1 if you have the <sys/socket.h> header file. */
-#undef HAVE_SYS_SOCKET_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/sysctl.h> header file. */
-#undef HAVE_SYS_SYSCTL_H
-
-/* Define to 1 if you have the <sys/times.h> header file. */
-#undef HAVE_SYS_TIMES_H
-
-/* Define to 1 if you have the <sys/time.h> header file. */
-#undef HAVE_SYS_TIME_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have <sys/wait.h> that is POSIX.1 compatible. */
-#undef HAVE_SYS_WAIT_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if you have the <utmpx.h> header file. */
-#undef HAVE_UTMPX_H
-
-/* Define to 1 if you have the <utmp.h> header file. */
-#undef HAVE_UTMP_H
-
-/* True if program is to be compiled for a Linux kernel */
-#undef KERNEL_LINUX
-
-/* True if program is to be compiled for a Solaris kernel */
-#undef KERNEL_SOLARIS
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
-#undef TIME_WITH_SYS_TIME
-
-/* Version number of package */
-#undef VERSION
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const
-
-/* Define to `int' if <sys/types.h> does not define. */
-#undef pid_t
-
-/* Define to `unsigned' if <sys/types.h> does not define. */
-#undef size_t