X-Git-Url: https://git.tokkee.org/?a=blobdiff_plain;f=Documentation%2Fgit-send-email.txt;h=66bf3b2fcdccda9cb29d66756b3c20e5a1545d46;hb=07fb030efc7fd3d1833b53880dd39e98033326f6;hp=251d661afd9fc93b556e2673b202523dd30383c6;hpb=afce435000030e3ad076ef1dd413e0fa314cdcbb;p=git.git diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index 251d661af..0b1f183ce 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -8,8 +8,7 @@ git-send-email - Send a collection of patches as emails SYNOPSIS -------- -'git-send-email' [options] [... file|directory] - +'git send-email' [options] ... DESCRIPTION @@ -20,70 +19,110 @@ The header of the email is configurable by command line options. If not specified on the command line, the user will be prompted with a ReadLine enabled interface to provide the necessary information. +There are two formats accepted for patch files: + +1. mbox format files ++ +This is what linkgit:git-format-patch[1] generates. Most headers and MIME +formatting are ignored. + +2. The original format used by Greg Kroah-Hartman's 'send_lots_of_email.pl' +script ++ +This format expects the first line of the file to contain the "Cc:" value +and the "Subject:" of the message as the second line. + + OPTIONS ------- -The options available are: ---bcc:: - Specify a "Bcc:" value for each email. +Composing +~~~~~~~~~ + +--bcc=
:: + Specify a "Bcc:" value for each email. Default is the value of + 'sendemail.bcc'. + The --bcc option must be repeated for each user you want on the bcc list. ---cc:: +--cc=
:: Specify a starting "Cc:" value for each email. + Default is the value of 'sendemail.cc'. + The --cc option must be repeated for each user you want on the cc list. ---cc-cmd:: - Specify a command to execute once per patch file which - should generate patch file specific "Cc:" entries. - Output of this command must be single email address per line. - Default is the value of 'sendemail.cccmd' configuration value. - ---chain-reply-to:: ---no-chain-reply-to:: - If this is set, each email will be sent as a reply to the previous - email sent. If disabled with "--no-chain-reply-to", all emails after - the first will be sent as replies to the first email sent. When using - this, it is recommended that the first file given be an overview of the - entire patch series. - Default is the value of the 'sendemail.chainreplyto' configuration - value; if that is unspecified, default to --chain-reply-to. +--annotate:: + Review each patch you're about to send in an editor. The setting + 'sendemail.multiedit' defines if this will spawn one editor per patch + or one for all of them at once. --compose:: Use $GIT_EDITOR, core.editor, $VISUAL, or $EDITOR to edit an introductory message for the patch series. ++ +When '--compose' is used, git send-email will use the From, Subject, and +In-Reply-To headers specified in the message. If the body of the message +(what you type after the headers and a blank line) only contains blank +(or GIT: prefixed) lines the summary won't be sent, but From, Subject, +and In-Reply-To headers will be used unless they are removed. ++ +Missing From or In-Reply-To headers will be prompted for. ---from:: +--from=
:: Specify the sender of the emails. This will default to - the value GIT_COMMITTER_IDENT, as returned by "git-var -l". + the value GIT_COMMITTER_IDENT, as returned by "git var -l". The user will still be prompted to confirm this entry. ---in-reply-to:: +--in-reply-to=:: Specify the contents of the first In-Reply-To header. Subsequent emails will refer to the previous email instead of this if --chain-reply-to is set (the default) Only necessary if --compose is also set. If --compose is not set, this will be prompted for. ---signed-off-by-cc:: ---no-signed-off-by-cc:: - If this is set, add emails found in Signed-off-by: or Cc: lines to the - cc list. - Default is the value of 'sendemail.signedoffcc' configuration value; - if that is unspecified, default to --signed-off-by-cc. +--subject=:: + Specify the initial subject of the email thread. + Only necessary if --compose is also set. If --compose + is not set, this will be prompted for. ---quiet:: - Make git-send-email less verbose. One line per email should be - all that is output. +--to=
:: + Specify the primary recipient of the emails generated. Generally, this + will be the upstream maintainer of the project involved. Default is the + value of the 'sendemail.to' configuration value; if that is unspecified, + this will be prompted for. ++ +The --to option must be repeated for each user you want on the to list. ---identity:: - A configuration identity. When given, causes values in the - 'sendemail.' subsection to take precedence over - values in the 'sendemail' section. The default identity is - the value of 'sendemail.identity'. ---smtp-server:: +Sending +~~~~~~~ + +--envelope-sender=
:: + Specify the envelope sender used to send the emails. + This is useful if your default address is not the address that is + subscribed to a list. If you use the sendmail binary, you must have + suitable privileges for the -f parameter. Default is the value of + the 'sendemail.envelopesender' configuration variable; if that is + unspecified, choosing the envelope sender is left to your MTA. + +--smtp-encryption=:: + Specify the encryption to use, either 'ssl' or 'tls'. Any other + value reverts to plain SMTP. Default is the value of + 'sendemail.smtpencryption'. + +--smtp-pass[=]:: + Password for SMTP-AUTH. The argument is optional: If no + argument is specified, then the empty string is used as + the password. Default is the value of 'sendemail.smtppass', + however '--smtp-pass' always overrides this value. ++ +Furthermore, passwords need not be specified in configuration files +or on the command line. If a username has been specified (with +'--smtp-user' or a 'sendemail.smtpuser'), but no password has been +specified (with '--smtp-pass' or 'sendemail.smtppass'), then the +user is prompted for a password while the input is masked for privacy. + +--smtp-server=:: If set, specifies the outgoing SMTP server to use (e.g. `smtp.example.com` or a raw IP address). Alternatively it can specify a full pathname of a sendmail-like program instead; @@ -93,108 +132,129 @@ The --cc option must be repeated for each user you want on the cc list. `/usr/lib/sendmail` if such program is available, or `localhost` otherwise. ---smtp-server-port:: +--smtp-server-port=:: Specifies a port different from the default port (SMTP servers typically listen to smtp port 25 and ssmtp port - 465). + 465). This can be set with 'sendemail.smtpserverport'. ---smtp-user:: - Username for SMTP-AUTH. In place of this option, the following - configuration variables can be specified: -+ --- - * sendemail.smtpuser - * sendemail..smtpuser (see sendemail.identity). --- -+ -However, --smtp-user always overrides these variables. -+ -If a username is not specified (with --smtp-user or a -configuration variable), then authentication is not attempted. +--smtp-ssl:: + Legacy alias for '--smtp-encryption ssl'. ---smtp-pass:: - Password for SMTP-AUTH. The argument is optional: If no - argument is specified, then the empty string is used as - the password. -+ -In place of this option, the following configuration variables -can be specified: +--smtp-user=:: + Username for SMTP-AUTH. Default is the value of 'sendemail.smtpuser'; + if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'), + then authentication is not attempted. + + +Automating +~~~~~~~~~~ + +--cc-cmd=:: + Specify a command to execute once per patch file which + should generate patch file specific "Cc:" entries. + Output of this command must be single email address per line. + Default is the value of 'sendemail.cccmd' configuration value. + +--[no-]chain-reply-to=:: + If this is set, each email will be sent as a reply to the previous + email sent. If disabled with "--no-chain-reply-to", all emails after + the first will be sent as replies to the first email sent. When using + this, it is recommended that the first file given be an overview of the + entire patch series. Default is the value of the 'sendemail.chainreplyto' + configuration value; if that is unspecified, default to --chain-reply-to. + +--identity=:: + A configuration identity. When given, causes values in the + 'sendemail.' subsection to take precedence over + values in the 'sendemail' section. The default identity is + the value of 'sendemail.identity'. + +--[no-]signed-off-by-cc:: + If this is set, add emails found in Signed-off-by: or Cc: lines to the + cc list. Default is the value of 'sendemail.signedoffbycc' configuration + value; if that is unspecified, default to --signed-off-by-cc. + +--suppress-cc=:: + Specify an additional category of recipients to suppress the + auto-cc of: + -- - * sendemail.smtppass - * sendemail..smtppass (see sendemail.identity). +- 'author' will avoid including the patch author +- 'self' will avoid including the sender +- 'cc' will avoid including anyone mentioned in Cc lines in the patch header + except for self (use 'self' for that). +- 'ccbody' will avoid including anyone mentioned in Cc lines in the + patch body (commit message) except for self (use 'self' for that). +- 'sob' will avoid including anyone mentioned in Signed-off-by lines except + for self (use 'self' for that). +- 'cccmd' will avoid running the --cc-cmd. +- 'body' is equivalent to 'sob' + 'ccbody' +- 'all' will suppress all auto cc values. -- + -However, --smtp-pass always overrides these variables. -+ -Furthermore, passwords need not be specified in configuration files -or on the command line. If a username has been specified (with ---smtp-user or a configuration variable), but no password has been -specified (with --smtp-pass or a configuration variable), then the -user is prompted for a password while the input is masked for privacy. +Default is the value of 'sendemail.suppresscc' configuration value; if +that is unspecified, default to 'self' if --suppress-from is +specified, as well as 'body' if --no-signed-off-cc is specified. ---smtp-ssl:: - If set, connects to the SMTP server using SSL. - Default is the value of the 'sendemail.smtpssl' configuration value; - if that is unspecified, does not use SSL. +--[no-]suppress-from:: + If this is set, do not add the From: address to the cc: list. + Default is the value of 'sendemail.suppressfrom' configuration + value; if that is unspecified, default to --no-suppress-from. ---subject:: - Specify the initial subject of the email thread. - Only necessary if --compose is also set. If --compose - is not set, this will be prompted for. - ---suppress-from:: ---no-suppress-from:: - If this is set, do not add the From: address to the cc: list. - Default is the value of 'sendemail.suppressfrom' configuration value; - if that is unspecified, default to --no-suppress-from. - ---suppress-cc:: - Specify an additional category of recipients to suppress the - auto-cc of. 'self' will avoid including the sender, 'author' will - avoid including the patch author, 'cc' will avoid including anyone - mentioned in Cc lines in the patch, 'sob' will avoid including - anyone mentioned in Signed-off-by lines, and 'cccmd' will avoid - running the --cc-cmd. 'all' will suppress all auto cc values. - Default is the value of 'sendemail.suppresscc' configuration value; - if that is unspecified, default to 'self' if --suppress-from is - specified, as well as 'sob' if --no-signed-off-cc is specified. - ---thread:: ---no-thread:: +--[no-]thread:: If this is set, the In-Reply-To header will be set on each email sent. If disabled with "--no-thread", no emails will have the In-Reply-To - header set. - Default is the value of the 'sendemail.thread' configuration value; - if that is unspecified, default to --thread. + header set. Default is the value of the 'sendemail.thread' configuration + value; if that is unspecified, default to --thread. + + +Administering +~~~~~~~~~~~~~ + +--confirm=:: + Confirm just before sending: ++ +-- +- 'always' will always confirm before sending +- 'never' will never confirm before sending +- 'cc' will confirm before sending when send-email has automatically + added addresses from the patch to the Cc list +- 'compose' will confirm before sending the first message when using --compose. +- 'auto' is equivalent to 'cc' + 'compose' +-- ++ +Default is the value of 'sendemail.confirm' configuration value; if that +is unspecified, default to 'auto' unless any of the suppress options +have been specified, in which case default to 'compose'. --dry-run:: Do everything except actually send the emails. ---envelope-sender:: - Specify the envelope sender used to send the emails. - This is useful if your default address is not the address that is - subscribed to a list. If you use the sendmail binary, you must have - suitable privileges for the -f parameter. - ---to:: - Specify the primary recipient of the emails generated. - Generally, this will be the upstream maintainer of the - project involved. - Default is the value of the 'sendemail.to' configuration value; - if that is unspecified, this will be prompted for. +--quiet:: + Make git-send-email less verbose. One line per email should be + all that is output. + +--[no-]validate:: + Perform sanity checks on patches. + Currently, validation means the following: + -The --to option must be repeated for each user you want on the to list. +-- + * Warn of patches that contain lines longer than 998 characters; this + is due to SMTP limits as described by http://www.ietf.org/rfc/rfc2821.txt. +-- ++ +Default is the value of 'sendemail.validate'; if this is not set, +default to '--validate'. + +--[no-]format-patch:: + When an argument may be understood either as a reference or as a file name, + choose to understand it as a format-patch argument ('--format-patch') + or as a file name ('--no-format-patch'). By default, when such a conflict + occurs, git send-email will fail. CONFIGURATION ------------- -sendemail.identity:: - The default configuration identity. When specified, - 'sendemail..' will have higher precedence than - 'sendemail.'. This is useful to declare multiple SMTP - identities and to hoist sensitive authentication information - out of the repository and into the global configuration file. sendemail.aliasesfile:: To avoid typing long email addresses, point this to one or more @@ -204,33 +264,17 @@ sendemail.aliasfiletype:: Format of the file(s) specified in sendemail.aliasesfile. Must be one of 'mutt', 'mailrc', 'pine', or 'gnus'. -sendemail.to:: - Email address (or alias) to always send to. - -sendemail.cccmd:: - Command to execute to generate per patch file specific "Cc:"s. - -sendemail.bcc:: - Email address (or alias) to always bcc. +sendemail.multiedit:: + If true (default), a single editor instance will be spawned to edit + files you have to edit (patches when '--annotate' is used, and the + summary when '--compose' is used). If false, files will be edited one + after the other, spawning a new editor each time. -sendemail.chainreplyto:: - Boolean value specifying the default to the '--chain_reply_to' - parameter. +sendemail.confirm:: + Sets the default for whether to confirm before sending. Must be + one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm' + in the previous section for the meaning of these values. -sendemail.smtpserver:: - Default SMTP server to use. - -sendemail.smtpserverport:: - Default SMTP server port to use. - -sendemail.smtpuser:: - Default SMTP-AUTH username. - -sendemail.smtppass:: - Default SMTP-AUTH password. - -sendemail.smtpssl:: - Boolean value specifying the default to the '--smtp-ssl' parameter. Author ------ @@ -239,10 +283,12 @@ Written by Ryan Anderson git-send-email is originally based upon send_lots_of_email.pl by Greg Kroah-Hartman. + Documentation -------------- Documentation by Ryan Anderson + GIT --- Part of the linkgit:git[1] suite