![[tokkee]](http://tokkee.org/images/avatar.png){kind=avatar}
index c9471d562ddf8e793453f0404db8553f0ec24754..773a516ff0f40d396cb04cc474c697617192ae71 100755 (executable)
#
check_files_exist() {
ok=0 &&
- num=${#@} &&
+ num=$# &&
for arg ; do
test_path_is_file "$arg" &&
ok=$(($ok + 1))
# - dir2
# - file21
# - file22
+init_depot() {
+ for d in 1 2 ; do
+ mkdir -p dir$d &&
+ for f in 1 2 ; do
+ echo dir$d/file$d$f >dir$d/file$d$f &&
+ p4 add dir$d/file$d$f &&
+ p4 submit -d "dir$d/file$d$f"
+ done
+ done &&
+ find . -type f ! -name files >files &&
+ check_files_exist dir1/file11 dir1/file12 \
+ dir2/file21 dir2/file22
+}
+
test_expect_success 'init depot' '
(
cd "$cli" &&
- for d in 1 2 ; do
- mkdir -p dir$d &&
- for f in 1 2 ; do
- echo dir$d/file$d$f >dir$d/file$d$f &&
- p4 add dir$d/file$d$f &&
- p4 submit -d "dir$d/file$d$f"
- done
- done &&
- find . -type f ! -name files >files &&
- check_files_exist dir1/file11 dir1/file12 \
- dir2/file21 dir2/file22
+ init_depot
)
'
test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot
'
-test_expect_success 'wildcard ... only supported at end of spec' '
+test_expect_success 'wildcard ... only supported at end of spec 1' '
client_view "//depot/.../file11 //client/.../file11" &&
test_when_finished cleanup_git &&
test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot
'
+test_expect_success 'wildcard ... only supported at end of spec 2' '
+ client_view "//depot/.../a/... //client/.../a/..." &&
+ test_when_finished cleanup_git &&
+ test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot
+'
+
test_expect_success 'basic map' '
client_view "//depot/dir1/... //client/cli1/..." &&
files="cli1/file11 cli1/file12" &&
git_verify "cdir 1/file11" "cdir 1/file12"
'
+#
+# Submit tests
+#
+
+# clone sets variable
+test_expect_success 'clone --use-client-spec sets useClientSpec' '
+ client_view "//depot/... //client/..." &&
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ (
+ cd "$git" &&
+ git config --bool git-p4.useClientSpec >actual &&
+ echo true >true &&
+ test_cmp actual true
+ )
+'
+
+# clone just a subdir of the client spec
+test_expect_success 'subdir clone' '
+ client_view "//depot/... //client/..." &&
+ files="dir1/file11 dir1/file12 dir2/file21 dir2/file22" &&
+ client_verify $files &&
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 &&
+ git_verify dir1/file11 dir1/file12
+'
+
+#
+# submit back, see what happens: five cases
+#
+test_expect_success 'subdir clone, submit modify' '
+ client_view "//depot/... //client/..." &&
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 &&
+ (
+ cd "$git" &&
+ git config git-p4.skipSubmitEdit true &&
+ echo line >>dir1/file12 &&
+ git add dir1/file12 &&
+ git commit -m dir1/file12 &&
+ "$GITP4" submit
+ ) &&
+ (
+ cd "$cli" &&
+ test_path_is_file dir1/file12 &&
+ test_line_count = 2 dir1/file12
+ )
+'
+
+test_expect_success 'subdir clone, submit add' '
+ client_view "//depot/... //client/..." &&
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 &&
+ (
+ cd "$git" &&
+ git config git-p4.skipSubmitEdit true &&
+ echo file13 >dir1/file13 &&
+ git add dir1/file13 &&
+ git commit -m dir1/file13 &&
+ "$GITP4" submit
+ ) &&
+ (
+ cd "$cli" &&
+ test_path_is_file dir1/file13
+ )
+'
+
+test_expect_success 'subdir clone, submit delete' '
+ client_view "//depot/... //client/..." &&
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 &&
+ (
+ cd "$git" &&
+ git config git-p4.skipSubmitEdit true &&
+ git rm dir1/file12 &&
+ git commit -m "delete dir1/file12" &&
+ "$GITP4" submit
+ ) &&
+ (
+ cd "$cli" &&
+ test_path_is_missing dir1/file12
+ )
+'
+
+test_expect_success 'subdir clone, submit copy' '
+ client_view "//depot/... //client/..." &&
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 &&
+ (
+ cd "$git" &&
+ git config git-p4.skipSubmitEdit true &&
+ git config git-p4.detectCopies true &&
+ cp dir1/file11 dir1/file11a &&
+ git add dir1/file11a &&
+ git commit -m "copy to dir1/file11a" &&
+ "$GITP4" submit
+ ) &&
+ (
+ cd "$cli" &&
+ test_path_is_file dir1/file11a
+ )
+'
+
+test_expect_success 'subdir clone, submit rename' '
+ client_view "//depot/... //client/..." &&
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 &&
+ (
+ cd "$git" &&
+ git config git-p4.skipSubmitEdit true &&
+ git config git-p4.detectRenames true &&
+ git mv dir1/file13 dir1/file13a &&
+ git commit -m "rename dir1/file13 to dir1/file13a" &&
+ "$GITP4" submit
+ ) &&
+ (
+ cd "$cli" &&
+ test_path_is_missing dir1/file13 &&
+ test_path_is_file dir1/file13a
+ )
+'
+
+test_expect_success 'reinit depot' '
+ (
+ cd "$cli" &&
+ p4 sync -f &&
+ rm files &&
+ p4 delete */* &&
+ p4 submit -d "delete all files" &&
+ init_depot
+ )
+'
+
+#
+# What happens when two files of the same name are overlayed together?
+# The last-listed file should take preference.
+#
+# //depot
+# - dir1
+# - file11
+# - file12
+# - filecollide
+# - dir2
+# - file21
+# - file22
+# - filecollide
+#
+test_expect_success 'overlay collision setup' '
+ client_view "//depot/... //client/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir1/filecollide >dir1/filecollide &&
+ p4 add dir1/filecollide &&
+ p4 submit -d dir1/filecollide &&
+ echo dir2/filecollide >dir2/filecollide &&
+ p4 add dir2/filecollide &&
+ p4 submit -d dir2/filecollide
+ )
+'
+
+test_expect_success 'overlay collision 1 to 2' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22 filecollide" &&
+ echo dir2/filecollide >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/filecollide &&
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files &&
+ test_cmp actual "$git"/filecollide
+'
+
+test_expect_failure 'overlay collision 2 to 1' '
+ client_view "//depot/dir2/... //client/..." \
+ "+//depot/dir1/... //client/..." &&
+ files="file11 file12 file21 file22 filecollide" &&
+ echo dir1/filecollide >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/filecollide &&
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files &&
+ test_cmp actual "$git"/filecollide
+'
+
+test_expect_success 'overlay collision delete 2' '
+ client_view "//depot/... //client/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ p4 delete dir2/filecollide &&
+ p4 submit -d "remove dir2/filecollide"
+ )
+'
+
+# no filecollide, got deleted with dir2
+test_expect_failure 'overlay collision 1 to 2, but 2 deleted' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22" &&
+ client_verify $files &&
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files
+'
+
+test_expect_success 'overlay collision update 1' '
+ client_view "//depot/dir1/... //client/dir1/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ p4 open dir1/filecollide &&
+ echo dir1/filecollide update >dir1/filecollide &&
+ p4 submit -d "update dir1/filecollide"
+ )
+'
+
+# still no filecollide, dir2 still wins with the deletion even though the
+# change to dir1 is more recent
+test_expect_failure 'overlay collision 1 to 2, but 2 deleted, then 1 updated' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22" &&
+ client_verify $files &&
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files
+'
+
+test_expect_success 'overlay collision delete filecollides' '
+ client_view "//depot/... //client/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ p4 delete dir1/filecollide dir2/filecollide &&
+ p4 submit -d "remove filecollides"
+ )
+'
+
+#
+# Overlays as part of sync, rather than initial checkout:
+# 1. add a file in dir1
+# 2. sync to include it
+# 3. add same file in dir2
+# 4. sync, make sure content switches as dir2 has priority
+# 5. add another file in dir1
+# 6. sync
+# 7. add/delete same file in dir2
+# 8. sync, make sure it disappears, again dir2 wins
+# 9. cleanup
+#
+# //depot
+# - dir1
+# - file11
+# - file12
+# - colA
+# - colB
+# - dir2
+# - file21
+# - file22
+# - colA
+# - colB
+#
+test_expect_success 'overlay sync: add colA in dir1' '
+ client_view "//depot/dir1/... //client/dir1/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir1/colA >dir1/colA &&
+ p4 add dir1/colA &&
+ p4 submit -d dir1/colA
+ )
+'
+
+test_expect_success 'overlay sync: initial git checkout' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22 colA" &&
+ echo dir1/colA >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colA &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files &&
+ test_cmp actual "$git"/colA
+'
+
+test_expect_success 'overlay sync: add colA in dir2' '
+ client_view "//depot/dir2/... //client/dir2/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir2/colA >dir2/colA &&
+ p4 add dir2/colA &&
+ p4 submit -d dir2/colA
+ )
+'
+
+test_expect_success 'overlay sync: colA content switch' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22 colA" &&
+ echo dir2/colA >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colA &&
+ (
+ cd "$git" &&
+ "$GITP4" sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files &&
+ test_cmp actual "$git"/colA
+'
+
+test_expect_success 'overlay sync: add colB in dir1' '
+ client_view "//depot/dir1/... //client/dir1/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir1/colB >dir1/colB &&
+ p4 add dir1/colB &&
+ p4 submit -d dir1/colB
+ )
+'
+
+test_expect_success 'overlay sync: colB appears' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22 colA colB" &&
+ echo dir1/colB >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colB &&
+ (
+ cd "$git" &&
+ "$GITP4" sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files &&
+ test_cmp actual "$git"/colB
+'
+
+test_expect_success 'overlay sync: add/delete colB in dir2' '
+ client_view "//depot/dir2/... //client/dir2/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir2/colB >dir2/colB &&
+ p4 add dir2/colB &&
+ p4 submit -d dir2/colB &&
+ p4 delete dir2/colB &&
+ p4 submit -d "delete dir2/colB"
+ )
+'
+
+test_expect_success 'overlay sync: colB disappears' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22 colA" &&
+ client_verify $files &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ "$GITP4" sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files
+'
+
+test_expect_success 'overlay sync: cleanup' '
+ client_view "//depot/... //client/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ p4 delete dir1/colA dir2/colA dir1/colB &&
+ p4 submit -d "remove overlay sync files"
+ )
+'
+
+#
+# Overlay tests again, but swapped so dir1 has priority.
+# 1. add a file in dir1
+# 2. sync to include it
+# 3. add same file in dir2
+# 4. sync, make sure content does not switch
+# 5. add another file in dir1
+# 6. sync
+# 7. add/delete same file in dir2
+# 8. sync, make sure it is still there
+# 9. cleanup
+#
+# //depot
+# - dir1
+# - file11
+# - file12
+# - colA
+# - colB
+# - dir2
+# - file21
+# - file22
+# - colA
+# - colB
+#
+test_expect_success 'overlay sync swap: add colA in dir1' '
+ client_view "//depot/dir1/... //client/dir1/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir1/colA >dir1/colA &&
+ p4 add dir1/colA &&
+ p4 submit -d dir1/colA
+ )
+'
+
+test_expect_success 'overlay sync swap: initial git checkout' '
+ client_view "//depot/dir2/... //client/..." \
+ "+//depot/dir1/... //client/..." &&
+ files="file11 file12 file21 file22 colA" &&
+ echo dir1/colA >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colA &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files &&
+ test_cmp actual "$git"/colA
+'
+
+test_expect_success 'overlay sync swap: add colA in dir2' '
+ client_view "//depot/dir2/... //client/dir2/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir2/colA >dir2/colA &&
+ p4 add dir2/colA &&
+ p4 submit -d dir2/colA
+ )
+'
+
+test_expect_failure 'overlay sync swap: colA no content switch' '
+ client_view "//depot/dir2/... //client/..." \
+ "+//depot/dir1/... //client/..." &&
+ files="file11 file12 file21 file22 colA" &&
+ echo dir1/colA >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colA &&
+ (
+ cd "$git" &&
+ "$GITP4" sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files &&
+ test_cmp actual "$git"/colA
+'
+
+test_expect_success 'overlay sync swap: add colB in dir1' '
+ client_view "//depot/dir1/... //client/dir1/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir1/colB >dir1/colB &&
+ p4 add dir1/colB &&
+ p4 submit -d dir1/colB
+ )
+'
+
+test_expect_success 'overlay sync swap: colB appears' '
+ client_view "//depot/dir2/... //client/..." \
+ "+//depot/dir1/... //client/..." &&
+ files="file11 file12 file21 file22 colA colB" &&
+ echo dir1/colB >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colB &&
+ (
+ cd "$git" &&
+ "$GITP4" sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files &&
+ test_cmp actual "$git"/colB
+'
+
+test_expect_success 'overlay sync swap: add/delete colB in dir2' '
+ client_view "//depot/dir2/... //client/dir2/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir2/colB >dir2/colB &&
+ p4 add dir2/colB &&
+ p4 submit -d dir2/colB &&
+ p4 delete dir2/colB &&
+ p4 submit -d "delete dir2/colB"
+ )
+'
+
+test_expect_failure 'overlay sync swap: colB no change' '
+ client_view "//depot/dir2/... //client/..." \
+ "+//depot/dir1/... //client/..." &&
+ files="file11 file12 file21 file22 colA colB" &&
+ echo dir1/colB >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colB &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ "$GITP4" sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files &&
+ test_cmp actual "$cli"/colB
+'
+
+test_expect_success 'overlay sync swap: cleanup' '
+ client_view "//depot/... //client/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ p4 delete dir1/colA dir2/colA dir1/colB &&
+ p4 submit -d "remove overlay sync files"
+ )
+'
+
#
# Rename directories to test quoting in depot-side mappings
# //depot