diff --git a/src/collectd.conf.pod b/src/collectd.conf.pod
index 96c60ea7bbbf205638060ad4bf419c07d7998fc4..11db1ccdc3d1e07c49f7c6efc93761ba43c0e21b 100644 (file)
--- a/src/collectd.conf.pod
+++ b/src/collectd.conf.pod
+=encoding UTF-8
+
=head1 NAME
collectd.conf - Configuration for the system statistics collection daemon B<collectd>
=item B<LoadPlugin> I<Plugin>
-Loads the plugin I<Plugin>. There must be at least one such line or B<collectd>
-will be mostly useless.
+Loads the plugin I<Plugin>. This is required to load plugins, unless the
+B<AutoLoadPlugin> option is enabled (see below). Without any loaded plugins,
+I<collectd> will be mostly useless.
-Starting with collectd 4.9, this may also be a block in which further options
-affecting the behavior of B<LoadPlugin> may be specified. The following
-options are allowed inside a B<LoadPlugin> block:
+Only the first B<LoadPlugin> statement or block for a given plugin name has any
+effect. This is useful when you want to split up the configuration into smaller
+files and want each file to be "self contained", i.e. it contains a B<Plugin>
+block I<and> then appropriate B<LoadPlugin> statement. The downside is that if
+you have multiple conflicting B<LoadPlugin> blocks, e.g. when they specify
+different intervals, only one of them (the first one encountered) will take
+effect and all others will be silently ignored.
- <LoadPlugin perl>
- Globals true
- Interval 10
- </LoadPlugin>
+B<LoadPlugin> may either be a simple configuration I<statement> or a I<block>
+with additional options, affecting the behavior of B<LoadPlugin>. A simple
+statement looks like this:
+
+ LoadPlugin "cpu"
+
+Options inside a B<LoadPlugin> block can override default settings and
+influence the way plugins are loaded, e.g.:
+
+ <LoadPlugin perl>
+ Globals true
+ Interval 60
+ </LoadPlugin>
+
+The following options are valid inside B<LoadPlugin> blocks:
=over 4
=back
+=item B<AutoLoadPlugin> B<false>|B<true>
+
+When set to B<false> (the default), each plugin needs to be loaded explicitly,
+using the B<LoadPlugin> statement documented above. If a
+B<E<lt>PluginE<nbsp>...E<gt>> block is encountered and no configuration
+handling callback for this plugin has been registered, a warning is logged and
+the block is ignored.
+
+When set to B<true>, explicit B<LoadPlugin> statements are not required. Each
+B<E<lt>PluginE<nbsp>...E<gt>> block acts as if it was immediately preceded by a
+B<LoadPlugin> statement. B<LoadPlugin> statements are still required for
+plugins that don't provide any configuration, e.g. the I<Load plugin>.
+
=item B<Include> I<Path> [I<pattern>]
If I<Path> points to a file, includes that file. If I<Path> points to a
Include "/etc/collectd.d/*.conf"
+Starting with version 5.3, this may also be a block in which further options
+affecting the behavior of B<Include> may be specified. The following option is
+currently allowed:
+
+ <Include "/etc/collectd.d">
+ Filter "*.conf"
+ </Include>
+
+=over 4
+
+=item B<Filter> I<pattern>
+
If the C<fnmatch> function is available on your system, a shell-like wildcard
I<pattern> may be specified to filter which files to include. This may be used
in combination with recursively including a directory to easily be able to
arbitrarily mix configuration files and other documents (e.g. README files).
-The following statement is similar to the example above but includes all files
+The given example is similar to the first example above but includes all files
matching C<*.conf> in any subdirectory of C</etc/collectd.d>:
Include "/etc/collectd.d" "*.conf"
+=back
+
If more than one files are included by a single B<Include> option, the files
will be included in lexicographical order (as defined by the C<strcmp>
function). Thus, you can e.E<nbsp>g. use numbered prefixes to specify the
default value is B<5>, but you may want to increase this if you have more than
five plugins that may take relatively long to write to.
+=item B<WriteQueueLimitHigh> I<HighNum>
+
+=item B<WriteQueueLimitLow> I<LowNum>
+
+Metrics are read by the I<read threads> and then put into a queue to be handled
+by the I<write threads>. If one of the I<write plugins> is slow (e.g. network
+timeouts, I/O saturation of the disk) this queue will grow. In order to avoid
+running into memory issues in such a case, you can limit the size of this
+queue.
+
+By default, there is no limit and memory may grow indefinitely. This is most
+likely not an issue for clients, i.e. instances that only handle the local
+metrics. For servers it is recommended to set this to a non-zero value, though.
+
+You can set the limits using B<WriteQueueLimitHigh> and B<WriteQueueLimitLow>.
+Each of them takes a numerical argument which is the number of metrics in the
+queue. If there are I<HighNum> metrics in the queue, any new metrics I<will> be
+dropped. If there are less than I<LowNum> metrics in the queue, all new metrics
+I<will> be enqueued. If the number of metrics currently in the queue is between
+I<LowNum> and I<HighNum>, the metric is dropped with a probability that is
+proportional to the number of metrics in the queue (i.e. it increases linearly
+until it reaches 100%.)
+
+If B<WriteQueueLimitHigh> is set to non-zero and B<WriteQueueLimitLow> is
+unset, the latter will default to half of B<WriteQueueLimitHigh>.
+
+If you do not want to randomly drop values when the queue size is between
+I<LowNum> and I<HighNum>, set If B<WriteQueueLimitHigh> and
+B<WriteQueueLimitLow> to same value.
+
=item B<Hostname> I<Name>
Sets the hostname that identifies a host. If you omit this setting, the
many small files are stored on the disk. This is a usual scenario for mail
transfer agents and web caches.
+=item B<ValuesAbsolute> B<true>|B<false>
+
+Enables or disables reporting of free, used and used disk space in 1K-blocks.
+Defaults to true.
+
+=item B<ValuesPercentage> B<true>|B<false>
+
+Enables or disables reporting of free, used and used disk space in percentage.
+Defaults to false.
+
+This is useful for deploying collectd on the cloud, where machines with
+different disk size may exist. Then it is more practical to configure thresholds
+based on relative disk size.
+
=back
=head2 Plugin C<disk>
=head2 Plugin C<varnish>
-The Varnish plugin collects information about Varnish, an HTTP accelerator.
+The I<varnish plugin> collects information about Varnish, an HTTP accelerator.
+
+Synopsis:
+
+ <Plugin "varnish">
+ <Instance "example">
+ CollectCache true
+ CollectConnections true
+ CollectBackend true
+ CollectSHM true
+ CollectESI false
+ CollectFetch false
+ CollectHCB false
+ CollectSMA false
+ CollectSMS false
+ CollectSM false
+ CollectTotals false
+ CollectWorkers false
+ </Instance>
+ </Plugin>
+
+The configuration consists of one or more E<lt>B<Instance>E<nbsp>I<Name>E<gt>
+blocks. I<Name> is the parameter passed to "varnishd -n". If left empty, it
+will collectd statistics from the default "varnishd" instance (this should work
+fine in most cases).
+
+Inside each E<lt>B<Instance>E<gt> blocks, the following options are recognized:
=over 4
Statistics about the shared memory log, a memory region to store
log messages which is flushed to disk when full. True by default.
+=item B<CollectBan> B<true>|B<false>
+
+Statistics about ban operations, such as number of bans added, retired, and
+number of objects tested against ban operations. Only available with Varnish
+3.x. False by default.
+
+=item B<CollectDirectorDNS> B<true>|B<false>
+
+DNS director lookup cache statistics. Only available with Varnish 3.x. False by
+default.
+
=item B<CollectESI> B<true>|B<false>
Edge Side Includes (ESI) parse statistics. False by default.
@@ -5693,10 +5819,27 @@ Statistics about fetches (HTTP requests sent to the backend). False by default.
Inserts and look-ups in the crit bit tree based hash. Look-ups are
divided into locked and unlocked look-ups. False by default.
+=item B<CollectObjects> B<true>|B<false>
+
+Statistics on cached objects: number of objects expired, nuked (prematurely
+expired), saved, moved, etc. False by default.
+
+=item B<CollectPurge> B<true>|B<false>
+
+Statistics about purge operations, such as number of purges added, retired, and
+number of objects tested against purge operations. Only available with Varnish
+2.x. False by default.
+
+=item B<CollectSession> B<true>|B<false>
+
+Client session statistics. Number of past and current sessions, session herd and
+linger counters, etc. False by default.
+
=item B<CollectSMA> B<true>|B<false>
-malloc or umem (umem_alloc(3MALLOC) based) storage statistics.
-The umem storage component is Solaris specific. False by default.
+malloc or umem (umem_alloc(3MALLOC) based) storage statistics. The umem storage
+component is Solaris specific. Only available with Varnish 2.x. False by
+default.
=item B<CollectSMS> B<true>|B<false>
=item B<CollectSM> B<true>|B<false>
-file (memory mapped file) storage statistics. False by default.
+file (memory mapped file) storage statistics. Only available with Varnish 2.x.
+False by default.
+
+=item B<CollectStruct> B<true>|B<false>
+
+Current varnish internal state statistics. Number of current sessions, objects
+in cache store, open connections to backends (with Varnish 2.x), etc. False by
+default.
=item B<CollectTotals> B<true>|B<false>
Collects overview counters, such as the number of sessions created,
the number of requests and bytes transferred. False by default.
+=item B<CollectUptime> B<true>|B<false>
+
+Varnish uptime. False by default.
+
+=item B<CollectVCL> B<true>|B<false>
+
+Number of total (available + discarded) VCL (config files). False by default.
+
=item B<CollectWorkers> B<true>|B<false>
Collect statistics about worker threads. False by default.
The C<write_graphite> plugin writes data to I<Graphite>, an open-source metrics
storage and graphing project. The plugin connects to I<Carbon>, the data layer
-of I<Graphite>, and sends data via the "line based" protocol (per default using
-portE<nbsp>2003). The data will be sent in blocks of at most 1428 bytes to
-minimize the number of network packets.
+of I<Graphite>, via I<TCP> or I<UDP> and sends data via the "line based"
+protocol (per default using portE<nbsp>2003). The data will be sent in blocks
+of at most 1428 bytes to minimize the number of network packets.
Synopsis:
<Node "example">
Host "localhost"
Port "2003"
+ Protocol "udp"
+ LogSendErrors true
Prefix "collectd"
</Node>
</Plugin>
Service name or port number to connect to. Defaults to C<2003>.
+=item B<Protocol> I<String>
+
+Protocol to use when connecting to I<Graphite>. Defaults to C<tcp>.
+
+=item B<LogSendErrors> B<false>|B<true>
+
+If set to B<true> (the default), logs errors when sending data to I<Graphite>.
+If set to B<false>, it will not log the errors. This is especially useful when
+using Protocol UDP since many times we want to use the "fire-and-forget"
+approach and logging errors fills syslog with unneeded messages.
+
=item B<Prefix> I<String>
When set, I<String> is added in front of the host name. Dots and whitespace are
Protocol UDP
StoreRates true
AlwaysAppendDS false
- Delay 10
+ TTLFactor 2.0
</Node>
Tag "foobar"
</Plugin>
identifies a metric in I<Riemann>. If set to B<false> (the default), this is
only done when there is more than one DS.
+=item B<TTLFactor> I<Factor>
+
+I<Riemann> events have a I<Time to Live> (TTL) which specifies how long each
+event is considered active. I<collectd> populates this field based on the
+metrics interval setting. This setting controls the factor with which the
+interval is multiplied to set the TTL. The default value is B<2.0>. Unless you
+know exactly what you're doing, you should only increase this setting from its
+default value.
+
=back
=item B<Tag> I<String>